BARCO-CLICKSHARE-MIB
BARCO Control RoomsThis MIB module defines a set of event triggers and actions for network management of ClickShare devices
snmptranslate -m BARCO-CLICKSHARE-MIB -Tpsnmpwalk -v2c -c <community> -m BARCO-CLICKSHARE-MIB <host> 1.3.6.1.4.1.7312.2468Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Nbarco | 1.3.6.1.4.1.7312 | ||||||||||||
| IclickShare | 1.3.6.1.4.1.7312.2468 | ||||||||||||
identity This MIB module defines a set of event triggers and actions for network management of ClickShare devices | |||||||||||||
| Nevents | 1.3.6.1.4.1.7312.2468.0 | ||||||||||||
| !alarmCpuTemperature | 1.3.6.1.4.1.7312.2468.0.1 | ||||||||||||
notification · current An alarmCpuTemperature trap idicates that the CPU temperature exceeded the threshold. | |||||||||||||
| !alarmCaseFanSpeed | 1.3.6.1.4.1.7312.2468.0.2 | ||||||||||||
notification · current An alarmCaseFanSpeed trap idicates that the case fan is spinning too slow. | |||||||||||||
| !alarmProcessNotRunning | 1.3.6.1.4.1.7312.2468.0.3 | ||||||||||||
notification · current An alarmProcessNotRunning trap idicates that one of the monitored processes is not running. | |||||||||||||
| NbaseUnit | 1.3.6.1.4.1.7312.2468.1 | ||||||||||||
| NdeviceInfo | 1.3.6.1.4.1.7312.2468.1.1 | ||||||||||||
| SdiRoomName | 1.3.6.1.4.1.7312.2468.1.1.1 | DisplayString | RO | Zentraler Semina
72 72 61 75 6D 00 | |||||||||
scalar · DisplayString · read-only · current Name of the meeting room where the Base Unit is located. This string will be visible on the Base Unit's screen. Example values from LibreNMS test devices
| |||||||||||||
| SdiWelcomeMessage | 1.3.6.1.4.1.7312.2468.1.1.2 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current A welcome message visible on the Base Unit's screen. | |||||||||||||
| SdiLocation | 1.3.6.1.4.1.7312.2468.1.1.3 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Name of the location where the Base Unit is located. | |||||||||||||
| SdiArticleCode | 1.3.6.1.4.1.7312.2468.1.1.4 | DisplayString | RO | 52:39:38:36:31:35:32:30:45:55:00 | |||||||||
scalar · DisplayString · read-only · current The Base Unit article code. Example values from LibreNMS test devices
| |||||||||||||
| SdiSerialNumber | 1.3.6.1.4.1.7312.2468.1.1.5 | DisplayString | RO | 31:38:37:34:38:33:30:35:34:33:00 | |||||||||
scalar · DisplayString · read-only · current The Base Unit serial number. Example values from LibreNMS test devices
| |||||||||||||
| SdiUptime | 1.3.6.1.4.1.7312.2468.1.1.6 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current The Base Unit current uptime. | |||||||||||||
| SdiTotalUptime | 1.3.6.1.4.1.7312.2468.1.1.7 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current The Base Unit total uptime. | |||||||||||||
| Nsensors | 1.3.6.1.4.1.7312.2468.1.2 | ||||||||||||
| SsensorCaseFanSpeed | 1.3.6.1.4.1.7312.2468.1.2.1 | DisplayString | RO | 00 | |||||||||
scalar · DisplayString · read-only · current Indicates the current speed of the case fan. Example values from LibreNMS test devices
| |||||||||||||
| SsensorCpuFanSpeed | 1.3.6.1.4.1.7312.2468.1.2.2 | DisplayString | RO | 30:00 | |||||||||
scalar · DisplayString · read-only · current Indicates the current speed of the CPU fan. Example values from LibreNMS test devices
| |||||||||||||
| SsensorCpuTemperature | 1.3.6.1.4.1.7312.2468.1.2.3 | DisplayString | RO | 35:35:2e:36:35:32:00 | |||||||||
scalar · DisplayString · read-only · current Indicates the current CPU temperature. Example values from LibreNMS test devices
| |||||||||||||
| SsensorCpuTemperatureThreshold | 1.3.6.1.4.1.7312.2468.1.2.4 | DisplayString | RO | 39:35:00 | |||||||||
scalar · DisplayString · read-only · current The CPU temperature limit. If the current temperature exceeds this setting, the Base Unit will shut down itself Example values from LibreNMS test devices
| |||||||||||||
| NclickShareMIB | 1.3.6.1.4.1.7312.2469 | ||||||||||||
| NclickShareMIBCompliances | 1.3.6.1.4.1.7312.2469.1 | ||||||||||||
| MclickShareMIBCompliance | 1.3.6.1.4.1.7312.2469.1.1 | ||||||||||||
compliance · current The compliance statement for ClickShare Base Unit devices.
| |||||||||||||
| NclickShareMIBGroups | 1.3.6.1.4.1.7312.2469.2 | ||||||||||||
| GdeviceInfoGroup | 1.3.6.1.4.1.7312.2469.2.1 | ||||||||||||
group · current The group of Device Info objects. | |||||||||||||
| GsensorsGroup | 1.3.6.1.4.1.7312.2469.2.2 | ||||||||||||
group · current The group of sensor objects. | |||||||||||||
| GeventsGroup | 1.3.6.1.4.1.7312.2469.2.99 | ||||||||||||
group · current The group of SNMP trap objects. | |||||||||||||
Traps / Notifications
- alarmCaseFanSpeed
1.3.6.1.4.1.7312.2468.0.2 - alarmCpuTemperature
1.3.6.1.4.1.7312.2468.0.1 - alarmProcessNotRunning
1.3.6.1.4.1.7312.2468.0.3