AT-ENVMONv2-MIB
Allied Telesis, Inc.The AT Environment Monitoring v2 MIB for managing and reporting data relating to voltage rails, fan speeds, temperature sensors and power supply units.
snmptranslate -m AT-ENVMONv2-MIB -Tpsnmpwalk -v2c -c <community> -m AT-ENVMONv2-MIB <host> 1.3.6.1.4.1.207.8.4.4.3.12Imports
| AT-SMI-MIB | DisplayStringUnsized |
|---|---|
| AT-SYSINFO-MIB | sysinfo |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IatEnvMonv2 | 1.3.6.1.4.1.207.8.4.4.3.12 | ||||||||||||||||||||
identity The AT Environment Monitoring v2 MIB for managing and reporting data relating to voltage rails, fan speeds, temperature sensors and power supply units. | |||||||||||||||||||||
| NatEnvMonv2Notifications | 1.3.6.1.4.1.207.8.4.4.3.12.0 | ||||||||||||||||||||
| !atEnvMonv2FanAlarmSetNotify | 1.3.6.1.4.1.207.8.4.4.3.12.0.1 | ||||||||||||||||||||
notification · current A notification generated when the monitored speed of a fan drops below its lower threshold. | |||||||||||||||||||||
| !atEnvMonv2FanAlarmClearedNotify | 1.3.6.1.4.1.207.8.4.4.3.12.0.2 | ||||||||||||||||||||
notification · current A notification generated when the monitored speed of a fan returns to an acceptable value, the fan having previously been in an alarm condition. | |||||||||||||||||||||
| !atEnvMonv2VoltAlarmSetNotify | 1.3.6.1.4.1.207.8.4.4.3.12.0.3 | ||||||||||||||||||||
notification · current A notification generated when the voltage of a monitored voltage rail goes out of tolerance, either by dropping below its lower threshold, or exceeding its upper threshold. | |||||||||||||||||||||
| !atEnvMonv2VoltAlarmClearedNotify | 1.3.6.1.4.1.207.8.4.4.3.12.0.4 | ||||||||||||||||||||
notification · current A notification generated when the voltage of a monitored voltage rail returns to an acceptable value, having previously been in an alarm condition. | |||||||||||||||||||||
| !atEnvMonv2TempAlarmSetNotify | 1.3.6.1.4.1.207.8.4.4.3.12.0.5 | ||||||||||||||||||||
notification · current A notification generated when a monitored temperature exceeds its upper threshold. | |||||||||||||||||||||
| !atEnvMonv2TempAlarmClearedNotify | 1.3.6.1.4.1.207.8.4.4.3.12.0.6 | ||||||||||||||||||||
notification · current A notification generated when a monitored temperature returns to an acceptable value, having previously been in an alarm condition. | |||||||||||||||||||||
| !atEnvMonv2PsbAlarmSetNotify | 1.3.6.1.4.1.207.8.4.4.3.12.0.7 | ||||||||||||||||||||
notification · current A notification generated when a monitored parameter of a power supply bay device goes out of tolerance. | |||||||||||||||||||||
| !atEnvMonv2PsbAlarmClearedNotify | 1.3.6.1.4.1.207.8.4.4.3.12.0.8 | ||||||||||||||||||||
notification · current A notification generated when a monitored parameter of a power supply bay device returns to an acceptable value, having previously been in an alarm condition. | |||||||||||||||||||||
| !atEnvMonv2ContactInputOpenNotify | 1.3.6.1.4.1.207.8.4.4.3.12.0.9 | ||||||||||||||||||||
notification · current A notification generated when a monitored contact input opens. | |||||||||||||||||||||
| !atEnvMonv2ContactInputCloseNotify | 1.3.6.1.4.1.207.8.4.4.3.12.0.10 | ||||||||||||||||||||
notification · current A notification generated when a monitored contact input closes. | |||||||||||||||||||||
| !atEnvMonv2ExternalPSUAlarmSetNotify | 1.3.6.1.4.1.207.8.4.4.3.12.0.11 | ||||||||||||||||||||
notification · current A notification generated when supply potential of a monitored external power supply is not present. | |||||||||||||||||||||
| !atEnvMonv2ExternalPSUAlarmClearedNotify | 1.3.6.1.4.1.207.8.4.4.3.12.0.12 | ||||||||||||||||||||
notification · current A notification generated when supply potential of a monitored external power supply returns to an acceptable value, having previously been in an alarm condition. | |||||||||||||||||||||
| !atEnvMonv2TempCriticalSetNotify | 1.3.6.1.4.1.207.8.4.4.3.12.0.13 | ||||||||||||||||||||
notification · current A notification generated when a monitored temperature exceeds its upper threshold. | |||||||||||||||||||||
| !atEnvMonv2TempCriticalClearedNotify | 1.3.6.1.4.1.207.8.4.4.3.12.0.14 | ||||||||||||||||||||
notification · current A notification generated when a monitored temperature returns to an acceptable value, having previously been in an alarm condition. | |||||||||||||||||||||
| !atEnvMonv2TempCriticalLevel1SetNotify | 1.3.6.1.4.1.207.8.4.4.3.12.0.15 | ||||||||||||||||||||
notification · current A notification generated when a monitored temperature exceeds the level 1 threshold. | |||||||||||||||||||||
| !atEnvMonv2TempCriticalLevel1ClearedNotify | 1.3.6.1.4.1.207.8.4.4.3.12.0.16 | ||||||||||||||||||||
notification · current A notification generated when a monitored temperature returns to an acceptable value, having previously been in critical temperature level 1 condition. | |||||||||||||||||||||
| !atEnvMonv2TempCriticalLevel2SetNotify | 1.3.6.1.4.1.207.8.4.4.3.12.0.17 | ||||||||||||||||||||
notification · current A notification generated when a monitored temperature exceeds the level 2 threshold. | |||||||||||||||||||||
| !atEnvMonv2TempCriticalLevel2ClearedNotify | 1.3.6.1.4.1.207.8.4.4.3.12.0.18 | ||||||||||||||||||||
notification · current A notification generated when a monitored temperature returns to an acceptable value, having previously been in critical temperature level 2 condition. | |||||||||||||||||||||
| !atEnvMonv2PsbPresenceChangeNotify | 1.3.6.1.4.1.207.8.4.4.3.12.0.19 | ||||||||||||||||||||
notification · current A notification generated when an insertion or removal event is detected on a power supply bay device. | |||||||||||||||||||||
| TatEnvMonv2FanTable | 1.3.6.1.4.1.207.8.4.4.3.12.1 | NA | |||||||||||||||||||
table · not-accessible · current A table of information about fans installed in the device that have their fan speeds monitored by environment monitoring hardware. | |||||||||||||||||||||
| RatEnvMonv2FanEntry | 1.3.6.1.4.1.207.8.4.4.3.12.1.1 | NA | |||||||||||||||||||
row · not-accessible · current The description, current speed, lower threshold speed and current status of a fan. | |||||||||||||||||||||
| CatEnvMonv2FanStackMemberId | 1.3.6.1.4.1.207.8.4.4.3.12.1.1.1 | Unsigned32 | RO | 1 | |||||||||||||||||
column · Unsigned32 · read-only · current The index of the stack member hosting this fan. For a chassis switch, it corresponds to the card ID of the controller that is monitoring the chassis hardware, e.g. 5 or 6. In a VCStack Plus, the second chassis uses controller IDs 17 or 18. Refer to chassisMappingTable for more details. | |||||||||||||||||||||
| CatEnvMonv2FanBoardIndex | 1.3.6.1.4.1.207.8.4.4.3.12.1.1.2 | Unsigned32 | RO | 9 | |||||||||||||||||
column · Unsigned32 · read-only · current The index of the board hosting this fan in the board table. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CatEnvMonv2FanIndex | 1.3.6.1.4.1.207.8.4.4.3.12.1.1.3 | Unsigned32 | RO | 1 | |||||||||||||||||
| CatEnvMonv2FanDescription | 1.3.6.1.4.1.207.8.4.4.3.12.1.1.4 | DisplayStringUnsized (SIZE (0..30)) | RO | Fan: Fan Tray A 1 Int | |||||||||||||||||
| CatEnvMonv2FanCurrentSpeed | 1.3.6.1.4.1.207.8.4.4.3.12.1.1.5 | Unsigned32 | RO | 4051 | |||||||||||||||||
| CatEnvMonv2FanLowerThreshold | 1.3.6.1.4.1.207.8.4.4.3.12.1.1.6 | Unsigned32 | RO | 3000 | |||||||||||||||||
column · Unsigned32 · read-only · current The minimum acceptable speed of the fan in revolutions per minute. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CatEnvMonv2FanStatus | 1.3.6.1.4.1.207.8.4.4.3.12.1.1.7 | INTEGER | RO | good(2) | |||||||||||||||||
column · INTEGER · read-only · current An indication of whether this fan is currently in an alarm condition. A value of 'failed(1)' indicates that its current speed is too low, 'good(2)' indicates that the current speed is acceptable.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TatEnvMonv2VoltageTable | 1.3.6.1.4.1.207.8.4.4.3.12.2 | NA | |||||||||||||||||||
table · not-accessible · current A table of information about voltage rails in the device that are monitored by environment monitoring hardware. | |||||||||||||||||||||
| RatEnvMonv2VoltageEntry | 1.3.6.1.4.1.207.8.4.4.3.12.2.1 | NA | |||||||||||||||||||
row · not-accessible · current The description, current value, upper & lower threshold settings and current status of a voltage rail. | |||||||||||||||||||||
| CatEnvMonv2VoltageStackMemberId | 1.3.6.1.4.1.207.8.4.4.3.12.2.1.1 | Unsigned32 | RO | 1 | |||||||||||||||||
column · Unsigned32 · read-only · current The index of the stack member hosting this voltage sensor. For a chassis switch, it corresponds to the card ID of the controller that is monitoring the chassis hardware, e.g. 5 or 6. In a VCStack Plus, the second chassis uses controller IDs 17 or 18. Refer to chassisMappingTable for more details. | |||||||||||||||||||||
| CatEnvMonv2VoltageBoardIndex | 1.3.6.1.4.1.207.8.4.4.3.12.2.1.2 | Unsigned32 | RO | 5 | |||||||||||||||||
column · Unsigned32 · read-only · current The index of the board hosting this voltage sensor in the board table. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CatEnvMonv2VoltageIndex | 1.3.6.1.4.1.207.8.4.4.3.12.2.1.3 | Unsigned32 | RO | 1 | |||||||||||||||||
| CatEnvMonv2VoltageDescription | 1.3.6.1.4.1.207.8.4.4.3.12.2.1.4 | DisplayStringUnsized (SIZE (0..30)) | RO | Voltage: 2.5V | |||||||||||||||||
| CatEnvMonv2VoltageCurrent | 1.3.6.1.4.1.207.8.4.4.3.12.2.1.5 | INTEGER | RO | 2487 | |||||||||||||||||
| CatEnvMonv2VoltageUpperThreshold | 1.3.6.1.4.1.207.8.4.4.3.12.2.1.6 | INTEGER | RO | 2865 | |||||||||||||||||
| CatEnvMonv2VoltageLowerThreshold | 1.3.6.1.4.1.207.8.4.4.3.12.2.1.7 | INTEGER | RO | 2344 | |||||||||||||||||
| CatEnvMonv2VoltageStatus | 1.3.6.1.4.1.207.8.4.4.3.12.2.1.8 | INTEGER | RO | inRange(2) | |||||||||||||||||
column · INTEGER · read-only · current An indication of whether this voltage rail is currently in an alarm condition. A value of 'outOfRange' indicates that its current reading is outside its threshold range, 'inRange' indicates that the current reading is acceptable.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TatEnvMonv2TemperatureTable | 1.3.6.1.4.1.207.8.4.4.3.12.3 | NA | |||||||||||||||||||
table · not-accessible · current A table of information about temperature sensors in the device that are monitored by environment monitoring hardware. | |||||||||||||||||||||
| RatEnvMonv2TemperatureEntry | 1.3.6.1.4.1.207.8.4.4.3.12.3.1 | NA | |||||||||||||||||||
row · not-accessible · current The description, current value, upper threshold setting and current status of a temperature sensor. | |||||||||||||||||||||
| CatEnvMonv2TemperatureStackMemberId | 1.3.6.1.4.1.207.8.4.4.3.12.3.1.1 | Unsigned32 | RO | 1 | |||||||||||||||||
column · Unsigned32 · read-only · current The index of the stack member hosting this temperature sensor. For a chassis switch, it corresponds to the card ID of the controller that is monitoring the chassis hardware, e.g. 5 or 6. In a VCStack Plus, the second chassis uses controller IDs 17 or 18. Refer to chassisMappingTable for more details. | |||||||||||||||||||||
| CatEnvMonv2TemperatureBoardIndex | 1.3.6.1.4.1.207.8.4.4.3.12.3.1.2 | Unsigned32 | RO | 5 | |||||||||||||||||
| CatEnvMonv2TemperatureIndex | 1.3.6.1.4.1.207.8.4.4.3.12.3.1.3 | Unsigned32 | RO | 6 | |||||||||||||||||
| CatEnvMonv2TemperatureDescription | 1.3.6.1.4.1.207.8.4.4.3.12.3.1.4 | DisplayStringUnsized (SIZE (0..30)) | RO | Temp: Internal | |||||||||||||||||
| CatEnvMonv2TemperatureCurrent | 1.3.6.1.4.1.207.8.4.4.3.12.3.1.5 | INTEGER | RO | 30 | |||||||||||||||||
| CatEnvMonv2TemperatureUpperThreshold | 1.3.6.1.4.1.207.8.4.4.3.12.3.1.6 | INTEGER | RO | 75 | |||||||||||||||||
| CatEnvMonv2TemperatureStatus | 1.3.6.1.4.1.207.8.4.4.3.12.3.1.7 | INTEGER | RO | inRange(2) | |||||||||||||||||
column · INTEGER · read-only · current An indication of whether this temperature sensor is currently in an alarm condition. A value of 'outOfRange' indicates that its current reading is outside its threshold range, 'inRange' indicates that the current reading is acceptable.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NatEnvMonv2PsbObjects | 1.3.6.1.4.1.207.8.4.4.3.12.4 | ||||||||||||||||||||
| TatEnvMonv2PsbTable | 1.3.6.1.4.1.207.8.4.4.3.12.4.1 | NA | |||||||||||||||||||
table · not-accessible · current A table of information about power supply bays in the system and any devices that are installed. | |||||||||||||||||||||
| RatEnvMonv2PsbEntry | 1.3.6.1.4.1.207.8.4.4.3.12.4.1.1 | NA | |||||||||||||||||||
row · not-accessible · current The description and current status of a power supply bay device. | |||||||||||||||||||||
| CatEnvMonv2PsbHostStackMemberId | 1.3.6.1.4.1.207.8.4.4.3.12.4.1.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The index of the stack member hosting this power supply bay. For a chassis switch, it corresponds to the card ID of the controller that is monitoring the chassis hardware, e.g. 5 or 6. In a VCStack Plus, the second chassis uses controller IDs 17 or 18. Refer to chassisMappingTable for more details. | |||||||||||||||||||||
| CatEnvMonv2PsbHostBoardIndex | 1.3.6.1.4.1.207.8.4.4.3.12.4.1.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The index of the board hosting this power supply bay in the board table. | |||||||||||||||||||||
| CatEnvMonv2PsbHostSlotIndex | 1.3.6.1.4.1.207.8.4.4.3.12.4.1.1.3 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The index of this power supply bay on its host board. This index is fixed for each slot, on each type of board. | |||||||||||||||||||||
| CatEnvMonv2PsbHeldBoardIndex | 1.3.6.1.4.1.207.8.4.4.3.12.4.1.1.4 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The index of a board installed in this power supply bay. This value corresponds to atEnvMonv2PsbSensorBoardIndex for each sensor on this board. A value of 0 indicates that a board is is either not present or not supported. | |||||||||||||||||||||
| CatEnvMonv2PsbHeldBoardId | 1.3.6.1.4.1.207.8.4.4.3.12.4.1.1.5 | OBJECT IDENTIFIER | RO | ||||||||||||||||||
column · OBJECT IDENTIFIER · read-only · current The type of board installed in this power supply bay. The values of this object are taken from the pprXxx object IDs under the boards sub-tree in the parent MIB. A value of 0 indicates that a board is either not present or not supported. | |||||||||||||||||||||
| CatEnvMonv2PsbDescription | 1.3.6.1.4.1.207.8.4.4.3.12.4.1.1.6 | DisplayStringUnsized (SIZE (0..30)) | RO | ||||||||||||||||||
column · DisplayStringUnsized (SIZE (0..30)) · read-only · current The description of this power supply bay. | |||||||||||||||||||||
| TatEnvMonv2PsbSensorTable | 1.3.6.1.4.1.207.8.4.4.3.12.4.2 | NA | |||||||||||||||||||
table · not-accessible · current A table of information about environment monitoring sensors on devices installed in power supply bays. | |||||||||||||||||||||
| RatEnvMonv2PsbSensorEntry | 1.3.6.1.4.1.207.8.4.4.3.12.4.2.1 | NA | |||||||||||||||||||
row · not-accessible · current The description and current status of a device installed in a power supply bay. | |||||||||||||||||||||
| CatEnvMonv2PsbSensorStackMemberId | 1.3.6.1.4.1.207.8.4.4.3.12.4.2.1.1 | Unsigned32 | RO | 1 | |||||||||||||||||
column · Unsigned32 · read-only · current The index of the stack member hosting this sensor. For a chassis switch, it corresponds to the card ID of the controller that is monitoring the chassis hardware, e.g. 5 or 6. In a VCStack Plus, the second chassis uses controller IDs 17 or 18. Refer to chassisMappingTable for more details. | |||||||||||||||||||||
| CatEnvMonv2PsbSensorBoardIndex | 1.3.6.1.4.1.207.8.4.4.3.12.4.2.1.2 | Unsigned32 | RO | 1 | |||||||||||||||||
column · Unsigned32 · read-only · current The index of the board hosting this sensor in the board table. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CatEnvMonv2PsbSensorIndex | 1.3.6.1.4.1.207.8.4.4.3.12.4.2.1.3 | Unsigned32 | RO | 2 | |||||||||||||||||
| CatEnvMonv2PsbSensorType | 1.3.6.1.4.1.207.8.4.4.3.12.4.2.1.4 | AtEnvMonv2PsbSensorType | RO | 2 | |||||||||||||||||
column · AtEnvMonv2PsbSensorType · read-only · current The type of environmental variable this sensor detects. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CatEnvMonv2PsbSensorDescription | 1.3.6.1.4.1.207.8.4.4.3.12.4.2.1.5 | DisplayStringUnsized (SIZE (0..30)) | RO | Fan/Temperature Fault | |||||||||||||||||
column · DisplayStringUnsized (SIZE (0..30)) · read-only · current The description of this power supply bay environmental sensor. | |||||||||||||||||||||
| CatEnvMonv2PsbSensorStatus | 1.3.6.1.4.1.207.8.4.4.3.12.4.2.1.6 | INTEGER | RO | good(2) | |||||||||||||||||
column · INTEGER · read-only · current An indication of whether this environmental sensor is currently in an alarm condition. A value of 'failed(1)' indicates that the device is in a failure condition, 'good(2)' indicates that the device is functioning normally. 'notPowered(3)' indicates that the PSU power input sensor for this PSU is showing no input power. notPresent(4) indicates that the presence sensor for this PSU indicates that the PSU is not present.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CatEnvMonv2PsbSensorReading | 1.3.6.1.4.1.207.8.4.4.3.12.4.2.1.7 | INTEGER | RO | no(1) | |||||||||||||||||
column · INTEGER · read-only · current An indication of whether this environmental sensor is currently reading a value for the monitored device. A value of 'no' indicates that there is no current reading, 'yes' indicates that the monitored device is supplying a reading.
| |||||||||||||||||||||
| NatEnvMonv2Traps | 1.3.6.1.4.1.207.8.4.4.3.12.5 | ||||||||||||||||||||
| !atEnvMonv2FanAlarmSetEvent | 1.3.6.1.4.1.207.8.4.4.3.12.5.1 | deprecated | |||||||||||||||||||
notification · deprecated A trap generated when the monitored speed of a fan drops below its lower threshold. | |||||||||||||||||||||
| !atEnvMonv2FanAlarmClearedEvent | 1.3.6.1.4.1.207.8.4.4.3.12.5.2 | deprecated | |||||||||||||||||||
notification · deprecated A trap generated when the monitored speed of a fan returns to an acceptable value, the fan having previously been in an alarm condition. | |||||||||||||||||||||
| !atEnvMonv2VoltAlarmSetEvent | 1.3.6.1.4.1.207.8.4.4.3.12.5.3 | deprecated | |||||||||||||||||||
notification · deprecated A trap generated when the voltage of a monitored voltage rail goes out of tolerance, either by dropping below its lower threshold, or exceeding its upper threshold. | |||||||||||||||||||||
| !atEnvMonv2VoltAlarmClearedEvent | 1.3.6.1.4.1.207.8.4.4.3.12.5.4 | deprecated | |||||||||||||||||||
notification · deprecated A trap generated when the voltage of a monitored voltage rail returns to an acceptable value, having previously been in an alarm condition. | |||||||||||||||||||||
| !atEnvMonv2TempAlarmSetEvent | 1.3.6.1.4.1.207.8.4.4.3.12.5.5 | deprecated | |||||||||||||||||||
notification · deprecated A trap generated when a monitored temperature exceeds its upper threshold. | |||||||||||||||||||||
| !atEnvMonv2TempAlarmClearedEvent | 1.3.6.1.4.1.207.8.4.4.3.12.5.6 | deprecated | |||||||||||||||||||
notification · deprecated A trap generated when a monitored temperature returns to an acceptable value, having previously been in an alarm condition. | |||||||||||||||||||||
| !atEnvMonv2PsbAlarmSetEvent | 1.3.6.1.4.1.207.8.4.4.3.12.5.7 | deprecated | |||||||||||||||||||
notification · deprecated A trap generated when a monitored parameter of a power supply bay device goes out of tolerance. | |||||||||||||||||||||
| !atEnvMonv2PsbAlarmClearedEvent | 1.3.6.1.4.1.207.8.4.4.3.12.5.8 | deprecated | |||||||||||||||||||
notification · deprecated A trap generated when a monitored parameter of a power supply bay device returns to an acceptable value, having previously been in an alarm condition. | |||||||||||||||||||||
| TatEnvMonv2FaultLedTable | 1.3.6.1.4.1.207.8.4.4.3.12.6 | NA | |||||||||||||||||||
table · not-accessible · current A table of information detailing any LED fault indications on the device. | |||||||||||||||||||||
| RatEnvMonv2FaultLedEntry | 1.3.6.1.4.1.207.8.4.4.3.12.6.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry pertaining to a given fault LED. | |||||||||||||||||||||
| CatEnvMonv2FaultLedStackMemberId | 1.3.6.1.4.1.207.8.4.4.3.12.6.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The index of the stack member hosting this fault LED. For a chassis switch, it corresponds to the card ID of the controller that is monitoring the chassis hardware, e.g. 5 or 6. In a VCStack Plus, the second chassis uses controller IDs 17 or 18. Refer to chassisMappingTable for more details. | |||||||||||||||||||||
| CatEnvMonv2FaultLed1Flash | 1.3.6.1.4.1.207.8.4.4.3.12.6.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This object indicates whether a fault LED is currently showing a system failure by flashing once. It indicates that one or more heatsink fans have failed, or are operating below the recommended speed.
| |||||||||||||||||||||
| CatEnvMonv2FaultLed2Flashes | 1.3.6.1.4.1.207.8.4.4.3.12.6.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This object indicates whether a fault LED is currently showing a system failure by flashing twice. It indicates that one or both of the chassis fans are not installed, or the fans are operating below the recommended speed.
| |||||||||||||||||||||
| CatEnvMonv2FaultLed3Flashes | 1.3.6.1.4.1.207.8.4.4.3.12.6.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This object indicates whether a fault LED is currently showing a system failure by flashing three times. It indicates that the ability to monitor temperature or fans has failed.
| |||||||||||||||||||||
| CatEnvMonv2FaultLed4Flashes | 1.3.6.1.4.1.207.8.4.4.3.12.6.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This object indicates whether a fault LED is currently showing a system failure by flashing four times. It indicates that an XEM failed to initialise or is incompatible.
| |||||||||||||||||||||
| CatEnvMonv2FaultLed5Flashes | 1.3.6.1.4.1.207.8.4.4.3.12.6.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This object indicates whether a fault LED is currently showing a system failure by flashing five times. This flashing sequence is not currently in use.
| |||||||||||||||||||||
| CatEnvMonv2FaultLed6Flashes | 1.3.6.1.4.1.207.8.4.4.3.12.6.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current This object indicates whether a fault LED is currently showing a system failure by flashing six times. It indicates that the device's temperature has exceeded the recommended threshold.
| |||||||||||||||||||||
| TatEnvMonv2ContactInputTable | 1.3.6.1.4.1.207.8.4.4.3.12.7 | NA | |||||||||||||||||||
table · not-accessible · current A table of information about contact inputs available in the device that are monitored by environment monitoring hardware. | |||||||||||||||||||||
| RatEnvMonv2ContactInputEntry | 1.3.6.1.4.1.207.8.4.4.3.12.7.1 | NA | |||||||||||||||||||
row · not-accessible · current The description and current state of a contact input. | |||||||||||||||||||||
| CatEnvMonv2ContactInputStackMemberId | 1.3.6.1.4.1.207.8.4.4.3.12.7.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The index of the stack member hosting this contact input. | |||||||||||||||||||||
| CatEnvMonv2ContactInputBoardIndex | 1.3.6.1.4.1.207.8.4.4.3.12.7.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The index of the board hosting this contact input in the board table. | |||||||||||||||||||||
| CatEnvMonv2ContactInputIndex | 1.3.6.1.4.1.207.8.4.4.3.12.7.1.3 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The numeric identifier of this contact input on its host board. | |||||||||||||||||||||
| CatEnvMonv2ContactInputDescription | 1.3.6.1.4.1.207.8.4.4.3.12.7.1.4 | DisplayStringUnsized (SIZE (0..30)) | RO | ||||||||||||||||||
column · DisplayStringUnsized (SIZE (0..30)) · read-only · current The description of this contact input. | |||||||||||||||||||||
| CatEnvMonv2ContactInputState | 1.3.6.1.4.1.207.8.4.4.3.12.7.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current An indication of whether this contact input is currently open or closed.
| |||||||||||||||||||||
| TatEnvMonv2ContactOutputTable | 1.3.6.1.4.1.207.8.4.4.3.12.8 | NA | |||||||||||||||||||
table · not-accessible · current A table of information about contact outputs available in the device that are managed by environment monitoring hardware. | |||||||||||||||||||||
| RatEnvMonv2ContactOutputEntry | 1.3.6.1.4.1.207.8.4.4.3.12.8.1 | NA | |||||||||||||||||||
row · not-accessible · current The description and current state of a contact output. | |||||||||||||||||||||
| CatEnvMonv2ContactOutputStackMemberId | 1.3.6.1.4.1.207.8.4.4.3.12.8.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The index of the stack member hosting this contact output. | |||||||||||||||||||||
| CatEnvMonv2ContactOutputBoardIndex | 1.3.6.1.4.1.207.8.4.4.3.12.8.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The index of the board hosting this contact output in the board table. | |||||||||||||||||||||
| CatEnvMonv2ContactOutputIndex | 1.3.6.1.4.1.207.8.4.4.3.12.8.1.3 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The numeric identifier of this contact output on its host board. | |||||||||||||||||||||
| CatEnvMonv2ContactOutputDescription | 1.3.6.1.4.1.207.8.4.4.3.12.8.1.4 | DisplayStringUnsized (SIZE (0..30)) | RO | ||||||||||||||||||
column · DisplayStringUnsized (SIZE (0..30)) · read-only · current The description of this contact output. | |||||||||||||||||||||
| CatEnvMonv2ContactOutputState | 1.3.6.1.4.1.207.8.4.4.3.12.8.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current An indication of whether this contact output is currently open or closed.
| |||||||||||||||||||||
| TatEnvMonv2ExternalPSUTable | 1.3.6.1.4.1.207.8.4.4.3.12.9 | NA | |||||||||||||||||||
table · not-accessible · current Table of external PSU status. | |||||||||||||||||||||
| RatEnvMonv2ExternalPSUEntry | 1.3.6.1.4.1.207.8.4.4.3.12.9.1 | NA | |||||||||||||||||||
row · not-accessible · current The description and current status of an external power supply. | |||||||||||||||||||||
| CatEnvMonv2ExternalPSUStackMemberId | 1.3.6.1.4.1.207.8.4.4.3.12.9.1.1 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The index of the stack member hosting this external PSU. | |||||||||||||||||||||
| CatEnvMonv2ExternalPSUBoardIndex | 1.3.6.1.4.1.207.8.4.4.3.12.9.1.2 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The index of the board hosting this external PSU in the board table. | |||||||||||||||||||||
| CatEnvMonv2ExternalPSUIndex | 1.3.6.1.4.1.207.8.4.4.3.12.9.1.3 | Unsigned32 | RO | ||||||||||||||||||
column · Unsigned32 · read-only · current The numeric identifier of this external PSU on its host board. | |||||||||||||||||||||
| CatEnvMonv2ExternalPSUDescription | 1.3.6.1.4.1.207.8.4.4.3.12.9.1.4 | DisplayStringUnsized (SIZE (0..30)) | RO | ||||||||||||||||||
column · DisplayStringUnsized (SIZE (0..30)) · read-only · current The description of this external PSU. | |||||||||||||||||||||
| CatEnvMonv2ExternalPSUState | 1.3.6.1.4.1.207.8.4.4.3.12.9.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current An indication of whether the supply potential of the external power supply is present or not. A value of 'failed(1)' indicates that no power is being received on this input, 'good(2)' indicates that this input is receiving power from the external power supply.
| |||||||||||||||||||||
Textual conventions
AtEnvMonv2PsbSensorTypeINTEGERfanSpeedDiscrete(1)presenceDiscrete(4)psbSensorTypeInvalid(0)temperatureDiscrete(2)voltageDiscrete(3)Indicates the type of a Power Supply Bay Device sensor.
Traps / Notifications
- atEnvMonv2ContactInputCloseNotify
1.3.6.1.4.1.207.8.4.4.3.12.0.10 - atEnvMonv2ContactInputOpenNotify
1.3.6.1.4.1.207.8.4.4.3.12.0.9 - atEnvMonv2ExternalPSUAlarmClearedNotify
1.3.6.1.4.1.207.8.4.4.3.12.0.12 - atEnvMonv2ExternalPSUAlarmSetNotify
1.3.6.1.4.1.207.8.4.4.3.12.0.11 - atEnvMonv2FanAlarmClearedEvent
1.3.6.1.4.1.207.8.4.4.3.12.5.2 - atEnvMonv2FanAlarmClearedNotify
1.3.6.1.4.1.207.8.4.4.3.12.0.2 - atEnvMonv2FanAlarmSetEvent
1.3.6.1.4.1.207.8.4.4.3.12.5.1 - atEnvMonv2FanAlarmSetNotify
1.3.6.1.4.1.207.8.4.4.3.12.0.1 - atEnvMonv2PsbAlarmClearedEvent
1.3.6.1.4.1.207.8.4.4.3.12.5.8 - atEnvMonv2PsbAlarmClearedNotify
1.3.6.1.4.1.207.8.4.4.3.12.0.8 - atEnvMonv2PsbAlarmSetEvent
1.3.6.1.4.1.207.8.4.4.3.12.5.7 - atEnvMonv2PsbAlarmSetNotify
1.3.6.1.4.1.207.8.4.4.3.12.0.7 - atEnvMonv2PsbPresenceChangeNotify
1.3.6.1.4.1.207.8.4.4.3.12.0.19 - atEnvMonv2TempAlarmClearedEvent
1.3.6.1.4.1.207.8.4.4.3.12.5.6 - atEnvMonv2TempAlarmClearedNotify
1.3.6.1.4.1.207.8.4.4.3.12.0.6 - atEnvMonv2TempAlarmSetEvent
1.3.6.1.4.1.207.8.4.4.3.12.5.5 - atEnvMonv2TempAlarmSetNotify
1.3.6.1.4.1.207.8.4.4.3.12.0.5 - atEnvMonv2TempCriticalClearedNotify
1.3.6.1.4.1.207.8.4.4.3.12.0.14 - atEnvMonv2TempCriticalLevel1ClearedNotify
1.3.6.1.4.1.207.8.4.4.3.12.0.16 - atEnvMonv2TempCriticalLevel1SetNotify
1.3.6.1.4.1.207.8.4.4.3.12.0.15 - atEnvMonv2TempCriticalLevel2ClearedNotify
1.3.6.1.4.1.207.8.4.4.3.12.0.18 - atEnvMonv2TempCriticalLevel2SetNotify
1.3.6.1.4.1.207.8.4.4.3.12.0.17 - atEnvMonv2TempCriticalSetNotify
1.3.6.1.4.1.207.8.4.4.3.12.0.13 - atEnvMonv2VoltAlarmClearedEvent
1.3.6.1.4.1.207.8.4.4.3.12.5.4 - atEnvMonv2VoltAlarmClearedNotify
1.3.6.1.4.1.207.8.4.4.3.12.0.4 - atEnvMonv2VoltAlarmSetEvent
1.3.6.1.4.1.207.8.4.4.3.12.5.3 - atEnvMonv2VoltAlarmSetNotify
1.3.6.1.4.1.207.8.4.4.3.12.0.3