AT-ALMMON-MIB
Allied Telesis, Inc.The AT Alarm Monitoring MIB for managing and reporting device alarms.
snmptranslate -m AT-ALMMON-MIB -Tpsnmpwalk -v2c -c <community> -m AT-ALMMON-MIB <host> 1.3.6.1.4.1.207.8.4.4.3.26Imports
| AT-SMI-MIB | DisplayStringUnsized |
|---|---|
| AT-SYSINFO-MIB | sysinfo |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IatAlmMon | 1.3.6.1.4.1.207.8.4.4.3.26 | |||
identity The AT Alarm Monitoring MIB for managing and reporting device alarms. | ||||
| TatAlmMonActionTable | 1.3.6.1.4.1.207.8.4.4.3.26.1 | NA | ||
table · not-accessible · current A table of information describing alarm monitoring inputs and consequent actions (i.e. fault LED & relay outputs). | ||||
| RatAlmMonActionEntry | 1.3.6.1.4.1.207.8.4.4.3.26.1.1 | NA | ||
row · not-accessible · current The description and configuration of what to do for a specific monitored alarm. | ||||
| CatAlmMonActionStackMemberId | 1.3.6.1.4.1.207.8.4.4.3.26.1.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The index of the stack member of this alarm action. | ||||
| CatAlmMonActionIndex | 1.3.6.1.4.1.207.8.4.4.3.26.1.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The numeric identifier of this alarm action. | ||||
| CatAlmMonAlarmType | 1.3.6.1.4.1.207.8.4.4.3.26.1.1.3 | AtAlmMonAlarmType | RO | |
column · AtAlmMonAlarmType · read-only · current The type of alarm that this action monitors. | ||||
| CatAlmMonAlarmTypeSelection | 1.3.6.1.4.1.207.8.4.4.3.26.1.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The 1-based index of the alarm of the particular type (as catagorised by atAlmMonAlarmType). | ||||
| CatAlmMonActionDescription | 1.3.6.1.4.1.207.8.4.4.3.26.1.1.5 | DisplayStringUnsized (SIZE (0..30)) | RO | |
column · DisplayStringUnsized (SIZE (0..30)) · read-only · current The description of this alarm monitoring entry. | ||||
| CatAlmMonActionUseRelay1 | 1.3.6.1.4.1.207.8.4.4.3.26.1.1.6 | AtAlmMonActionUseOutput | RW | |
column · AtAlmMonActionUseOutput · read-write · current Indicates/controls whether or not this alarm monitor drives the first relay output. | ||||
| CatAlmMonActionUseRelay2 | 1.3.6.1.4.1.207.8.4.4.3.26.1.1.7 | AtAlmMonActionUseOutput | RW | |
column · AtAlmMonActionUseOutput · read-write · current Indicates/controls whether or not this alarm monitor drives the second relay output. | ||||
| CatAlmMonActionUseRelay3 | 1.3.6.1.4.1.207.8.4.4.3.26.1.1.8 | AtAlmMonActionUseOutput | RW | |
column · AtAlmMonActionUseOutput · read-write · current Indicates/controls whether or not this alarm monitor drives the third relay output. | ||||
| CatAlmMonActionUseFaultLed | 1.3.6.1.4.1.207.8.4.4.3.26.1.1.9 | AtAlmMonActionUseOutput | RW | |
column · AtAlmMonActionUseOutput · read-write · current Indicates/controls whether or not this alarm monitor drives the fault LED. | ||||
| CatAlmMonAbnormalState | 1.3.6.1.4.1.207.8.4.4.3.26.1.1.10 | AtAlmMonAbnormalState | RW | |
column · AtAlmMonAbnormalState · read-write · current Indicates/sets the abnormal (i.e. alarm active) state for a contact input. Only used for contactInput alarm monitors, ignored for all other types. | ||||
| CatAlmMonActionState | 1.3.6.1.4.1.207.8.4.4.3.26.1.1.11 | AtAlmMonActionState | RO | |
column · AtAlmMonActionState · read-only · current Indicates the current state of this alarm monitor. | ||||
| SatAlmMonPerStackConfiguration | 1.3.6.1.4.1.207.8.4.4.3.26.2 | TruthValue | RW | |
scalar · TruthValue · read-write · current Indicates whether to support per stack member configuration. A true value means that atAlmMonAvailableTable, atAlmMonOutputRelayTable, atAlmMonOutputLedTable and atAlmMonIutputContactTable are supported. A notTrue value means that atAlmMonActionTable is supported. This object should be set to a value that reflects the way that alarm monitors are actually configured or to be configured. | ||||
| TatAlmMonAvailableTable | 1.3.6.1.4.1.207.8.4.4.3.26.3 | NA | ||
table · not-accessible · current A table of information listing available alarms on the device. | ||||
| RatAlmMonAvailableEntry | 1.3.6.1.4.1.207.8.4.4.3.26.3.1 | NA | ||
row · not-accessible · current The description and configuration of each available alarm. | ||||
| CatAlmMonAvailableAlarmId | 1.3.6.1.4.1.207.8.4.4.3.26.3.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The unique numeric identifier for this alarm. | ||||
| CatAlmMonAvailableType | 1.3.6.1.4.1.207.8.4.4.3.26.3.1.2 | AtAlmMonAlarmType | RO | |
column · AtAlmMonAlarmType · read-only · current The type of this alarm, such as externalPSU(1), epsr(2), etc. | ||||
| CatAlmMonAvailableTypeIndex | 1.3.6.1.4.1.207.8.4.4.3.26.3.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The index of the particular alarm type (catagorised by atAlmMonAlarmType). For some alarms there are multiple sources on the device (i.e. power supplies). In these cases this object indicates which source the alarm is for (i.e. power supply 1, or power supply 2). This object is used for externalPSU(1) and contactInput(3) alarm only. | ||||
| CatAlmMonAvailableStkId | 1.3.6.1.4.1.207.8.4.4.3.26.3.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The id of stack member this alarm triggers on. This object is used for externalPSU(1), contactInput(3), portLinkDown(4), portPoeFailure(7) and temperature(8) alarm only. | ||||
| CatAlmMonAvailableIfName | 1.3.6.1.4.1.207.8.4.4.3.26.3.1.5 | DisplayStringUnsized (SIZE (0..32)) | RO | |
column · DisplayStringUnsized (SIZE (0..32)) · read-only · current The name of the specific interface that this alarm triggers on, such as 'port1.0.1. This object is used for portLinkDown(4) and portPoeFailure(7) alarm only. | ||||
| CatAlmMonAvailableState | 1.3.6.1.4.1.207.8.4.4.3.26.3.1.6 | AtAlmMonActionState | RO | |
column · AtAlmMonActionState · read-only · current Indicates the current state of this alarm. | ||||
| TatAlmMonOutputRelayTable | 1.3.6.1.4.1.207.8.4.4.3.26.4 | NA | ||
table · not-accessible · current This table lists all associations existing on the device between output relays and alarms. Theoretically, an output relay on the device can be triggered by multiple alarms and an alarm can trigger multiple output relays. | ||||
| RatAlmMonOutputRelayEntry | 1.3.6.1.4.1.207.8.4.4.3.26.4.1 | NA | ||
row · not-accessible · current This entry reprents an association between one ouput relay and one alarm. To configure an alarm to use an output relay, a user needs to create a new entry. This can be done through writing a value of used(2) to object atAlmMonOutputRelayUsage that is specified by atAlmMonOutputRelayStkId, atAlmMonOutputRelayNumber, and atAlmMonOutputRelayAlarmId. To reconfigure an alarm not to use an output relay, a user needs to delete the entry. This can be done by writing a value of unused(1) to object atAlmMonOutputRelayUsage. | ||||
| CatAlmMonOutputRelayStkId | 1.3.6.1.4.1.207.8.4.4.3.26.4.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The id of stack member that the relay(s) reside on. | ||||
| CatAlmMonOutputRelayNumber | 1.3.6.1.4.1.207.8.4.4.3.26.4.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number (i.e. the 1 based index) of the relay. | ||||
| CatAlmMonOutputRelayAlarmId | 1.3.6.1.4.1.207.8.4.4.3.26.4.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The id of the alarm that may use this relay output. | ||||
| CatAlmMonOutputRelayUsage | 1.3.6.1.4.1.207.8.4.4.3.26.4.1.4 | AtAlmMonActionUseOutput | RW | |
column · AtAlmMonActionUseOutput · read-write · current This object indicates whether or not the relay output is used. Since there are entries only for existing associations between the output relays and the alarms, the object value should be always used(2). If a user sets a value of unused(1) to this object, then the whole entry will be deleted. If a user sets a value of used(2) to this object with new index, then a new entry should be created if stack member id, relay number and alarm id are specified properly in the index. | ||||
| TatAlmMonOutputLedTable | 1.3.6.1.4.1.207.8.4.4.3.26.5 | NA | ||
table · not-accessible · current This table lists all associations existing on the device between output LED(s) and alarms. Theoretically, an output LED on the device can be triggered by multiple alarms and an alarm can trigger multiple LED(s). | ||||
| RatAlmMonOutputLedEntry | 1.3.6.1.4.1.207.8.4.4.3.26.5.1 | NA | ||
row · not-accessible · current This entry reprents an association between one LED and one alarm. To configure an alarm to use an output LED, a user needs to create a new entry. This can be done through writing a value of used(2) to object atAlmMonOutputLedUsage that is specified by atAlmMonOutputLedStkId and atAlmMonOutputRelayAlarmId. To reconfigure an alarm not to use an output LED, a user needs to delete the entry. This can be done by writing a value of unused(1) to object atAlmMonOutputLedUsage. | ||||
| CatAlmMonOutputLedStkId | 1.3.6.1.4.1.207.8.4.4.3.26.5.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The id of stack member that the output LED resides on. | ||||
| CatAlmMonOutputLedAlarmId | 1.3.6.1.4.1.207.8.4.4.3.26.5.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The id of the alarm that may use this output LED. | ||||
| CatAlmMonOutputLedUsage | 1.3.6.1.4.1.207.8.4.4.3.26.5.1.3 | AtAlmMonActionUseOutput | RW | |
column · AtAlmMonActionUseOutput · read-write · current This object indicates whether or not an LED is used. Since there are entries only for existing associations between the output LED(s) and the alarms, the object value should be always used(2). If a user sets a value of unused(1) to this object, then the whole entry will be deleted. If a user sets a value of used(2) to this object with new index, then a new entry should be created if stack member id and alarm id are specified properly in the index. | ||||
| TatAlmMonInputContactTable | 1.3.6.1.4.1.207.8.4.4.3.26.6 | NA | ||
table · not-accessible · current This table lists all input contacts on the device and their positions. | ||||
| RatAlmMonInputContactEntry | 1.3.6.1.4.1.207.8.4.4.3.26.6.1 | NA | ||
row · not-accessible · current The information of each input contact configuration. | ||||
| CatAlmMonInputContactStkId | 1.3.6.1.4.1.207.8.4.4.3.26.6.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The id of stack member that the input contact reside on. | ||||
| CatAlmMonInputContactNumber | 1.3.6.1.4.1.207.8.4.4.3.26.6.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number (i.e. the 1 based index) of the input contact. | ||||
| CatAlmMonInputContactPosition | 1.3.6.1.4.1.207.8.4.4.3.26.6.1.3 | AtAlmMonContactPosition | RW | |
column · AtAlmMonContactPosition · read-write · current This object represents the position of the input contact. It is either open or closed. A user can reconfigure the position of an input contact by setting a different value to this object. | ||||
Textual conventions
AtAlmMonAbnormalStateINTEGERclosed(2)open(1)Indicates the abnormal (i.e. alarm active) state for a contact input alarm monitor.
AtAlmMonActionStateINTEGERactive(2)inactive(1)Indicates the current state of this alarm monitor.
AtAlmMonActionUseOutputINTEGERunused(1)used(2)Indicates whether or not the output device (relay or fault LED) is used for this alarm.
AtAlmMonAlarmTypeINTEGERcontactInput(3)epsr(2)externalPSU(1)g8032(9)loopDetect(5)mainPse(6)portLinkDown(4)portPoeFailure(7)temperature(8)ufo(10)Indicates the type of a monitored alarm.
AtAlmMonContactPositionINTEGERclosed(2)open(1)Indicates the position state for a contact input.