ROOMALERTST4E-MIB
AVTECH Software, Inc.snmptranslate -m ROOMALERTST4E-MIB -Tpsnmpwalk -v2c -c <community> -m ROOMALERTST4E-MIB <host> 1.3.6.1.4.1.20916Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Navtech | 1.3.6.1.4.1.20916 | ||||||||||||
| Nproducts | 1.3.6.1.4.1.20916.1 | ||||||||||||
| NROOMALERTST4E | 1.3.6.1.4.1.20916.1.6 | ||||||||||||
| !room-alert-st4e-snmp-trap | 1.3.6.1.4.1.20916.1.6.0.2 | ||||||||||||
notification A room-alert-st4e-snmp-trap indicates that an alarm condition has occurred on the sensor indicated by the alarmmessage variable.
| |||||||||||||
| Nsensors | 1.3.6.1.4.1.20916.1.6.1 | ||||||||||||
| Ninternal | 1.3.6.1.4.1.20916.1.6.1.1 | ||||||||||||
| Ntemperature | 1.3.6.1.4.1.20916.1.6.1.1.1 | ||||||||||||
| Sinternal-tempf | 1.3.6.1.4.1.20916.1.6.1.1.1.1 | INTEGER (0..65535) | RO | mandatory | 73 | ||||||||
scalar · INTEGER (0..65535) · read-only · mandatory The internal temperature reading in Fahrenheit. Because the SNMP Protocol does not support floating point numbers, values are scaled by 100 and should be divided by 100 to get the actual value. Example values from LibreNMS test devices
| |||||||||||||
| Sinternal-tempc | 1.3.6.1.4.1.20916.1.6.1.1.1.2 | INTEGER (0..65535) | RO | mandatory | 22 | ||||||||
scalar · INTEGER (0..65535) · read-only · mandatory The internal temperature reading in Celsius. Because the SNMP Protocol does not support floating point numbers, values are scaled by 100 and should be divided by 100 to get the actual value. Example values from LibreNMS test devices
| |||||||||||||
| Nhumidity | 1.3.6.1.4.1.20916.1.6.1.1.2 | ||||||||||||
| Sinternal-humidity | 1.3.6.1.4.1.20916.1.6.1.1.2.1 | INTEGER (0..65535) | RO | mandatory | Internal Sensor | ||||||||
scalar · INTEGER (0..65535) · read-only · mandatory The internal relative humidity reading in %RH. Because the SNMP Protocol does not support floating point numbers, values are scaled by 100 and should be divided by 100 to get the actual value. Example values from LibreNMS test devices
| |||||||||||||
| Nheat-index | 1.3.6.1.4.1.20916.1.6.1.1.3 | ||||||||||||
| Sinternal-heat-index | 1.3.6.1.4.1.20916.1.6.1.1.3.1 | INTEGER (0..65535) | RO | mandatory | |||||||||
scalar · INTEGER (0..65535) · read-only · mandatory The internal heat index reading in Fahrenheit. Because the SNMP Protocol does not support floating point numbers, values are scaled by 100 and should be divided by 100 to get the actual value. | |||||||||||||
| Ndigital | 1.3.6.1.4.1.20916.1.6.1.2 | ||||||||||||
| Ndigital-sen1 | 1.3.6.1.4.1.20916.1.6.1.2.1 | ||||||||||||
| Sdigital-sen1-1 | 1.3.6.1.4.1.20916.1.6.1.2.1.1 | INTEGER (0..65535) | RO | mandatory | 23 | ||||||||
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage. Example values from LibreNMS test devices
| |||||||||||||
| Sdigital-sen1-2 | 1.3.6.1.4.1.20916.1.6.1.2.1.2 | INTEGER (0..65535) | RO | mandatory | 73 | ||||||||
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts. Example values from LibreNMS test devices
| |||||||||||||
| Sdigital-sen1-3 | 1.3.6.1.4.1.20916.1.6.1.2.1.3 | INTEGER (0..65535) | RO | mandatory | |||||||||
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts. | |||||||||||||
| Sdigital-sen1-4 | 1.3.6.1.4.1.20916.1.6.1.2.1.4 | INTEGER (0..65535) | RO | mandatory | |||||||||
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts. | |||||||||||||
| Ndigital-sen2 | 1.3.6.1.4.1.20916.1.6.1.2.2 | ||||||||||||
| Sdigital-sen2-1 | 1.3.6.1.4.1.20916.1.6.1.2.2.1 | INTEGER (0..65535) | RO | mandatory | 23 | ||||||||
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Celsius. If this sensor is a Digital Power Sensor, this value represents the Current reading in Amperage. Example values from LibreNMS test devices
| |||||||||||||
| Sdigital-sen2-2 | 1.3.6.1.4.1.20916.1.6.1.2.2.2 | INTEGER (0..65535) | RO | mandatory | 73 | ||||||||
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current temperature in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Power reading in Watts. Example values from LibreNMS test devices
| |||||||||||||
| Sdigital-sen2-3 | 1.3.6.1.4.1.20916.1.6.1.2.2.3 | INTEGER (0..65535) | RO | mandatory | |||||||||
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Digital Power Sensor, this value represents the Voltage reading in Volts. | |||||||||||||
| Sdigital-sen2-4 | 1.3.6.1.4.1.20916.1.6.1.2.2.4 | INTEGER (0..65535) | RO | mandatory | |||||||||
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature or Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Digital Power Sensor, this value represents the Reference reading in Volts. | |||||||||||||
| Nswitch | 1.3.6.1.4.1.20916.1.6.1.3 | ||||||||||||
| Sswitch-sen1 | 1.3.6.1.4.1.20916.1.6.1.3.1 | INTEGER (0..1) | RO | mandatory | 0 | ||||||||
scalar · INTEGER (0..1) · read-only · mandatory The reading for switch sensor 1 (0 = OPEN, 1 = CLOSED). Example values from LibreNMS test devices
| |||||||||||||
| Nsignaltower | 1.3.6.1.4.1.20916.1.6.2 | ||||||||||||
| Sred-led | 1.3.6.1.4.1.20916.1.6.2.1 | INTEGER (0..1) | RW | ||||||||||
scalar · INTEGER (0..1) · read-write · current The status of this Signal Tower element (0 = OFF, 1 = ON). | |||||||||||||
| Samber-led | 1.3.6.1.4.1.20916.1.6.2.2 | INTEGER (0..1) | RW | ||||||||||
scalar · INTEGER (0..1) · read-write · current The status of this Signal Tower element (0 = OFF, 1 = ON). | |||||||||||||
| Sgreen-led | 1.3.6.1.4.1.20916.1.6.2.3 | INTEGER (0..1) | RW | ||||||||||
scalar · INTEGER (0..1) · read-write · current The status of this Signal Tower element (0 = OFF, 1 = ON). | |||||||||||||
| Sblue-led | 1.3.6.1.4.1.20916.1.6.2.4 | INTEGER (0..1) | RW | ||||||||||
scalar · INTEGER (0..1) · read-write · current The status of this Signal Tower element (0 = OFF, 1 = ON). | |||||||||||||
| Swhite-led | 1.3.6.1.4.1.20916.1.6.2.5 | INTEGER (0..1) | RW | ||||||||||
scalar · INTEGER (0..1) · read-write · current The status of this Signal Tower element (0 = OFF, 1 = ON). | |||||||||||||
| Salarm1 | 1.3.6.1.4.1.20916.1.6.2.6 | INTEGER (0..1) | RW | ||||||||||
scalar · INTEGER (0..1) · read-write · current The status of this Signal Tower element (0 = OFF, 1 = ON). | |||||||||||||
| Salarm2 | 1.3.6.1.4.1.20916.1.6.2.7 | INTEGER (0..1) | RW | ||||||||||
scalar · INTEGER (0..1) · read-write · current The status of this Signal Tower element (0 = OFF, 1 = ON). | |||||||||||||
| Ntraps | 1.3.6.1.4.1.20916.1.6.3 | ||||||||||||
| Salarmmessage | 1.3.6.1.4.1.20916.1.6.3.1 | OCTET STRING | RO | mandatory | | ||||||||
scalar · OCTET STRING · read-only · mandatory Last Alarm Message Example values from LibreNMS test devices
| |||||||||||||
Traps / Notifications
- room-alert-st4e-snmp-trap
1.3.6.1.4.1.20916.1.6.0.2