ROOMALERT4E-MIB
AVTECH Software, Inc.snmptranslate -m ROOMALERT4E-MIB -Tpsnmpwalk -v2c -c <community> -m ROOMALERT4E-MIB <host> 1.3.6.1.4.1.20916Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Navtech | 1.3.6.1.4.1.20916 | ||||||||||||
| Nproducts | 1.3.6.1.4.1.20916.1 | ||||||||||||
| Nroomalert4E | 1.3.6.1.4.1.20916.1.6 | ||||||||||||
| !room-alert-4e-snmp-trap | 1.3.6.1.4.1.20916.1.6.0.2 | ||||||||||||
notification A room-alert-4e-snmp-trap indicates that an alarm condition has occurred on the sensor indicated by the alarmmessage variable.
| |||||||||||||
| Nsensors | 1.3.6.1.4.1.20916.1.6.1 | ||||||||||||
| Ninternal | 1.3.6.1.4.1.20916.1.6.1.1 | ||||||||||||
| Ntemperature | 1.3.6.1.4.1.20916.1.6.1.1.1 | ||||||||||||
| Sinternal-tempf | 1.3.6.1.4.1.20916.1.6.1.1.1.1 | INTEGER (0..65535) | RO | mandatory | 73 | ||||||||
scalar · INTEGER (0..65535) · read-only · mandatory The internal temperature reading in Fahrenheit. Example values from LibreNMS test devices
| |||||||||||||
| Sinternal-tempc | 1.3.6.1.4.1.20916.1.6.1.1.1.2 | INTEGER (0..65535) | RO | mandatory | 22 | ||||||||
scalar · INTEGER (0..65535) · read-only · mandatory The internal temperature reading in Celsius. Example values from LibreNMS test devices
| |||||||||||||
| Nlabel | 1.3.6.1.4.1.20916.1.6.1.1.2 | ||||||||||||
| Sinternal-label | 1.3.6.1.4.1.20916.1.6.1.1.2.1 | OCTET STRING | RO | mandatory | Internal Sensor | ||||||||
scalar · OCTET STRING · read-only · mandatory The label of this sensor Example values from LibreNMS test devices
| |||||||||||||
| Ndigital | 1.3.6.1.4.1.20916.1.6.1.2 | ||||||||||||
| Ndigital-sen1 | 1.3.6.1.4.1.20916.1.6.1.2.1 | ||||||||||||
| Sdigital-sen1-1 | 1.3.6.1.4.1.20916.1.6.1.2.1.1 | INTEGER (0..65535) | RO | mandatory | 23 | ||||||||
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Celsius. Example values from LibreNMS test devices
| |||||||||||||
| Sdigital-sen1-2 | 1.3.6.1.4.1.20916.1.6.1.2.1.2 | INTEGER (0..65535) | RO | mandatory | 73 | ||||||||
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Fahrenheit. Example values from LibreNMS test devices
| |||||||||||||
| Sdigital-sen1-3 | 1.3.6.1.4.1.20916.1.6.1.2.1.3 | INTEGER (0..65535) | RO | mandatory | |||||||||
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog sensor, this value represents the current Voltage reading. If this is a Temp/Active Power sensor, this value represents the current power state (1=Power Detected, 0=No Power Detected). | |||||||||||||
| Sdigital-sen1-4 | 1.3.6.1.4.1.20916.1.6.1.2.1.4 | INTEGER (0..65535) | RO | mandatory | |||||||||
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current custom reading. | |||||||||||||
| Sdigital-sen1-5 | 1.3.6.1.4.1.20916.1.6.1.2.1.5 | INTEGER (0..65535) | RO | mandatory | |||||||||
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. | |||||||||||||
| Sdigital-sen1-6 | 1.3.6.1.4.1.20916.1.6.1.2.1.6 | INTEGER (0..65535) | RO | mandatory | |||||||||
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current dew point in Celsius. | |||||||||||||
| Sdigital-sen1-7 | 1.3.6.1.4.1.20916.1.6.1.2.1.7 | INTEGER (0..65535) | RO | mandatory | |||||||||
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current dew point in Fahrenheit. | |||||||||||||
| Sdigital-sen1-label | 1.3.6.1.4.1.20916.1.6.1.2.1.8 | OCTET STRING | RO | mandatory | Ext Sensor 1 | ||||||||
scalar · OCTET STRING · read-only · mandatory The label of this sensor Example values from LibreNMS test devices
| |||||||||||||
| Ndigital-sen2 | 1.3.6.1.4.1.20916.1.6.1.2.2 | ||||||||||||
| Sdigital-sen2-1 | 1.3.6.1.4.1.20916.1.6.1.2.2.1 | INTEGER (0..65535) | RO | mandatory | 23 | ||||||||
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Celsius. Example values from LibreNMS test devices
| |||||||||||||
| Sdigital-sen2-2 | 1.3.6.1.4.1.20916.1.6.1.2.2.2 | INTEGER (0..65535) | RO | mandatory | 73 | ||||||||
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Fahrenheit. Example values from LibreNMS test devices
| |||||||||||||
| Sdigital-sen2-3 | 1.3.6.1.4.1.20916.1.6.1.2.2.3 | INTEGER (0..65535) | RO | mandatory | |||||||||
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog sensor, this value represents the current Voltage reading. If this is a Temp/Active Power sensor, this value represents the current power state (1=Power Detected, 0=No Power Detected). | |||||||||||||
| Sdigital-sen2-4 | 1.3.6.1.4.1.20916.1.6.1.2.2.4 | INTEGER (0..65535) | RO | mandatory | |||||||||
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current custom reading. | |||||||||||||
| Sdigital-sen2-5 | 1.3.6.1.4.1.20916.1.6.1.2.2.5 | INTEGER (0..65535) | RO | mandatory | |||||||||
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. | |||||||||||||
| Sdigital-sen2-6 | 1.3.6.1.4.1.20916.1.6.1.2.2.6 | INTEGER (0..65535) | RO | mandatory | |||||||||
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current dew point in Celsius. | |||||||||||||
| Sdigital-sen2-7 | 1.3.6.1.4.1.20916.1.6.1.2.2.7 | INTEGER (0..65535) | RO | mandatory | |||||||||
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current dew point in Fahrenheit. | |||||||||||||
| Sdigital-sen2-label | 1.3.6.1.4.1.20916.1.6.1.2.2.8 | OCTET STRING | RO | mandatory | Ext Sensor 2 | ||||||||
scalar · OCTET STRING · read-only · mandatory The label of this sensor Example values from LibreNMS test devices
| |||||||||||||
| Nswitch | 1.3.6.1.4.1.20916.1.6.1.3 | ||||||||||||
| Sswitch-sen1 | 1.3.6.1.4.1.20916.1.6.1.3.1 | INTEGER (0..1) | RO | mandatory | 0 | ||||||||
scalar · INTEGER (0..1) · read-only · mandatory The reading for the switch sensor 1 (0 = OPEN, 1 = CLOSED). Example values from LibreNMS test devices
| |||||||||||||
| Sswitch-label | 1.3.6.1.4.1.20916.1.6.1.3.2 | OCTET STRING | RO | mandatory | Switch Sen 1 | ||||||||
scalar · OCTET STRING · read-only · mandatory The label for the switch sensor Example values from LibreNMS test devices
| |||||||||||||
| Nsignaltower | 1.3.6.1.4.1.20916.1.6.2 | ||||||||||||
| Sred-led | 1.3.6.1.4.1.20916.1.6.2.1 | INTEGER (0..1) | RW | mandatory | |||||||||
scalar · INTEGER (0..1) · read-write · mandatory The status of this Light Tower element (0 = OFF, 1 = ON). | |||||||||||||
| Samber-led | 1.3.6.1.4.1.20916.1.6.2.2 | INTEGER (0..1) | RW | mandatory | |||||||||
scalar · INTEGER (0..1) · read-write · mandatory The status of this Light Tower element (0 = OFF, 1 = ON). | |||||||||||||
| Sgreen-led | 1.3.6.1.4.1.20916.1.6.2.3 | INTEGER (0..1) | RW | mandatory | |||||||||
scalar · INTEGER (0..1) · read-write · mandatory The status of this Light Tower element (0 = OFF, 1 = ON). | |||||||||||||
| Sblue-led | 1.3.6.1.4.1.20916.1.6.2.4 | INTEGER (0..1) | RW | mandatory | |||||||||
scalar · INTEGER (0..1) · read-write · mandatory The status of this Light Tower element (0 = OFF, 1 = ON). | |||||||||||||
| Swhite-led | 1.3.6.1.4.1.20916.1.6.2.5 | INTEGER (0..1) | RW | mandatory | |||||||||
scalar · INTEGER (0..1) · read-write · mandatory The status of this Light Tower element (0 = OFF, 1 = ON). | |||||||||||||
| Salarm1 | 1.3.6.1.4.1.20916.1.6.2.6 | INTEGER (0..1) | RW | mandatory | |||||||||
scalar · INTEGER (0..1) · read-write · mandatory The status of this Light Tower element (0 = OFF, 1 = ON). | |||||||||||||
| Salarm2 | 1.3.6.1.4.1.20916.1.6.2.7 | INTEGER (0..1) | RW | mandatory | |||||||||
scalar · INTEGER (0..1) · read-write · mandatory The status of this Light Tower element (0 = OFF, 1 = ON). | |||||||||||||
| Ntraps | 1.3.6.1.4.1.20916.1.6.3 | ||||||||||||
| Salarmmessage | 1.3.6.1.4.1.20916.1.6.3.1 | OCTET STRING | RO | mandatory | | ||||||||
scalar · OCTET STRING · read-only · mandatory Last Alarm Message Example values from LibreNMS test devices
| |||||||||||||
Traps / Notifications
- room-alert-4e-snmp-trap
1.3.6.1.4.1.20916.1.6.0.2