ROOMALERT32E-MIB
AVTECH Software, Inc.snmptranslate -m ROOMALERT32E-MIB -Tpsnmpwalk -v2c -c <community> -m ROOMALERT32E-MIB <host> 1.3.6.1.4.1.20916Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Navtech | 1.3.6.1.4.1.20916 | |||
| Nproducts | 1.3.6.1.4.1.20916.1 | |||
| Nroomalert32E | 1.3.6.1.4.1.20916.1.8 | |||
| !tempalarm1-32E | 1.3.6.1.4.1.20916.1.8.0.1 | |||
notification A tempalarm1 trap signifies that the current temperature on external sensor 1 is outside the defined high or low threshold.
| ||||
| !room-alert-32E-snmp-trap | 1.3.6.1.4.1.20916.1.8.0.2 | |||
notification A room-alert-32E-snmp-trap indicates that an alarm condition has occurred on the sensor inidcated by the alarmMessage variable.
| ||||
| !tempalarm2-32E | 1.3.6.1.4.1.20916.1.8.0.3 | |||
notification A tempalarm2 trap signifies that the current temperature on external sensor 2 is outside the defined high or low threshold.
| ||||
| !tempclear2-32E | 1.3.6.1.4.1.20916.1.8.0.4 | |||
notification A tempclear2 trap signifies that the current temperature on external sensor 2 has returned to a normal condition and is within the defined high or low threshold.
| ||||
| !tempalarm3-32E | 1.3.6.1.4.1.20916.1.8.0.5 | |||
notification A tempalarm3 trap signifies that the current temperature on external sensor 3 is outside the defined high or low threshold.
| ||||
| !tempclear3-32E | 1.3.6.1.4.1.20916.1.8.0.6 | |||
notification A tempclear3 trap signifies that the current temperature on external sensor 3 has returned to a normal condition and is within the defined high or low threshold.
| ||||
| !humidityalarm1-32E | 1.3.6.1.4.1.20916.1.8.0.7 | |||
notification A humidityalarm1 trap signifies that the current humidity on external sensor 1 is outside the defined high or low threshold.
| ||||
| !humidityclear1-32E | 1.3.6.1.4.1.20916.1.8.0.8 | |||
notification A humidityclear1 trap signifies that the current humidity on external sensor 1 has returned to a normal condition and is within the defined high or low threshold.
| ||||
| !humidityalarm2-32E | 1.3.6.1.4.1.20916.1.8.0.9 | |||
notification A humidityalarm2 trap signifies that the current humidity on external sensor 2 is outside the defined high or low threshold.
| ||||
| !humidityclear2-32E | 1.3.6.1.4.1.20916.1.8.0.10 | |||
notification A humidityclear2 trap signifies that the current humidity on external sensor 2 has returned to a normal condition and is within the defined high or low threshold.
| ||||
| !humidityalarm3-32E | 1.3.6.1.4.1.20916.1.8.0.11 | |||
notification A humidityalarm3 trap signifies that the current humidity on external sensor 3 is outside the defined high or low threshold.
| ||||
| !humidityclear3-32E | 1.3.6.1.4.1.20916.1.8.0.12 | |||
notification A humidityclear3 trap signifies that the current humidity on external sensor 3 has returned to a normal condition and is within the defined high or low threshold.
| ||||
| !switchalarm1-32E | 1.3.6.1.4.1.20916.1.8.0.13 | |||
notification A switchalarm1 trap signifies that switch sensor 1 is in an alarm state.
| ||||
| !switchclear1-32E | 1.3.6.1.4.1.20916.1.8.0.14 | |||
notification A switchclear1 trap signifies that the switch sensor 1 has returned to a normal state.
| ||||
| !switchalarm2-32E | 1.3.6.1.4.1.20916.1.8.0.15 | |||
notification A switchalarm2 trap signifies that switch sensor 2 is in an alarm state.
| ||||
| !switchclear2-32E | 1.3.6.1.4.1.20916.1.8.0.16 | |||
notification A switchclear2 trap signifies that the switch sensor 2 has returned to a normal state.
| ||||
| !switchalarm3-32E | 1.3.6.1.4.1.20916.1.8.0.17 | |||
notification A switchalarm3 trap signifies that switch sensor 3 is in an alarm state.
| ||||
| !switchclear3-32E | 1.3.6.1.4.1.20916.1.8.0.18 | |||
notification A switchclear3 trap signifies that the switch sensor 3 has returned to a normal state.
| ||||
| !switchalarm4-32E | 1.3.6.1.4.1.20916.1.8.0.19 | |||
notification A switchalarm4 trap signifies that switch sensor 4 is in an alarm state.
| ||||
| !switchclear4-32E | 1.3.6.1.4.1.20916.1.8.0.20 | |||
notification A switchclear4 trap signifies that the switch sensor 4 has returned to a normal state.
| ||||
| !switchalarm5-32E | 1.3.6.1.4.1.20916.1.8.0.21 | |||
notification A switchalarm5 trap signifies that switch sensor 5 is in an alarm state.
| ||||
| !switchclear5-32E | 1.3.6.1.4.1.20916.1.8.0.22 | |||
notification A switchclear5 trap signifies that the switch sensor 5 has returned to a normal state.
| ||||
| !switchalarm6-32E | 1.3.6.1.4.1.20916.1.8.0.23 | |||
notification A switchalarm6 trap signifies that switch sensor 6 is in an alarm state.
| ||||
| !switchclear6-32E | 1.3.6.1.4.1.20916.1.8.0.24 | |||
notification A switchclear6 trap signifies that the switch sensor 6 has returned to a normal state.
| ||||
| !switchalarm7-32E | 1.3.6.1.4.1.20916.1.8.0.25 | |||
notification A switchalarm7 trap signifies that switch sensor 7 is in an alarm state.
| ||||
| !switchclear7-32E | 1.3.6.1.4.1.20916.1.8.0.26 | |||
notification A switchclear7 trap signifies that the switch sensor 7 has returned to a normal state.
| ||||
| !switchalarm8-32E | 1.3.6.1.4.1.20916.1.8.0.27 | |||
notification A switchalarm8 trap signifies that switch sensor 8 is in an alarm state.
| ||||
| !switchclear8-32E | 1.3.6.1.4.1.20916.1.8.0.28 | |||
notification A switchclear8 trap signifies that the switch sensor 8 has returned to a normal state.
| ||||
| Nsensors | 1.3.6.1.4.1.20916.1.8.1 | |||
| Ninternal | 1.3.6.1.4.1.20916.1.8.1.1 | |||
| Ntemperature | 1.3.6.1.4.1.20916.1.8.1.1.1 | |||
| Sinternal-tempf | 1.3.6.1.4.1.20916.1.8.1.1.1.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The internal temperature reading in Fahrenheit. | ||||
| Sinternal-tempc | 1.3.6.1.4.1.20916.1.8.1.1.1.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The internal temperature reading in Celsius. | ||||
| Nhumidity | 1.3.6.1.4.1.20916.1.8.1.1.2 | |||
| Sinternal-humidity | 1.3.6.1.4.1.20916.1.8.1.1.2.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The internal relative humidity reading in %RH. | ||||
| Npower | 1.3.6.1.4.1.20916.1.8.1.1.3 | |||
| Sinternal-power | 1.3.6.1.4.1.20916.1.8.1.1.3.1 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory The current status of the Room Alert 32E power supply. A '1' indicates the unit is running on AC/Utility power. A '0' indicates the unit is running on battery backup power. | ||||
| Nheat-index | 1.3.6.1.4.1.20916.1.8.1.1.4 | |||
| Sinternal-heat-index | 1.3.6.1.4.1.20916.1.8.1.1.4.1 | INTEGER (0..65535) | RO | optional |
scalar · INTEGER (0..65535) · read-only · optional The internal heat index reading in Fahrenheit. | ||||
| Sinternal-heat-indexC | 1.3.6.1.4.1.20916.1.8.1.1.4.2 | INTEGER (0..65535) | RO | optional |
scalar · INTEGER (0..65535) · read-only · optional The internal heat index reading in Celsius. | ||||
| Nanalog | 1.3.6.1.4.1.20916.1.8.1.1.5 | |||
| Sinternal-analog1 | 1.3.6.1.4.1.20916.1.8.1.1.5.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current status of the Room Alert 32E analog input (0-5VDC). | ||||
| Sinternal-analog2 | 1.3.6.1.4.1.20916.1.8.1.1.5.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current status of the Room Alert 32E analog input (0-5VDC). | ||||
| Nrelay | 1.3.6.1.4.1.20916.1.8.1.1.6 | |||
| Sinternal-relay1 | 1.3.6.1.4.1.20916.1.8.1.1.6.1 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory The status of the on-board relay output | ||||
| Sinternal-relay2 | 1.3.6.1.4.1.20916.1.8.1.1.6.2 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory The status of the on-board relay output | ||||
| Ndigital | 1.3.6.1.4.1.20916.1.8.1.2 | |||
| Ndigital-sen1 | 1.3.6.1.4.1.20916.1.8.1.2.1 | |||
| Sdigital-sen1-1 | 1.3.6.1.4.1.20916.1.8.1.2.1.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Celsius. | ||||
| Sdigital-sen1-2 | 1.3.6.1.4.1.20916.1.8.1.2.1.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Fahrenheit. | ||||
| Sdigital-sen1-3 | 1.3.6.1.4.1.20916.1.8.1.2.1.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog sensor, this value represents the current Voltage reading. If this is a Temp/Active Power sensor, this value represents the current power state (1=Power Detected, 0=No Power Detected). | ||||
| Sdigital-sen1-4 | 1.3.6.1.4.1.20916.1.8.1.2.1.4 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current custom reading. | ||||
| Sdigital-sen1-5 | 1.3.6.1.4.1.20916.1.8.1.2.1.5 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. | ||||
| Ndigital-sen2 | 1.3.6.1.4.1.20916.1.8.1.2.2 | |||
| Sdigital-sen2-1 | 1.3.6.1.4.1.20916.1.8.1.2.2.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Celsius. | ||||
| Sdigital-sen2-2 | 1.3.6.1.4.1.20916.1.8.1.2.2.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Fahrenheit. | ||||
| Sdigital-sen2-3 | 1.3.6.1.4.1.20916.1.8.1.2.2.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog sensor, this value represents the current Voltage reading. If this is a Temp/Active Power sensor, this value represents the current power state (1=Power Detected, 0=No Power Detected). | ||||
| Sdigital-sen2-4 | 1.3.6.1.4.1.20916.1.8.1.2.2.4 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current custom reading. | ||||
| Sdigital-sen2-5 | 1.3.6.1.4.1.20916.1.8.1.2.2.5 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. | ||||
| Ndigital-sen3 | 1.3.6.1.4.1.20916.1.8.1.2.3 | |||
| Sdigital-sen3-1 | 1.3.6.1.4.1.20916.1.8.1.2.3.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Celsius. | ||||
| Sdigital-sen3-2 | 1.3.6.1.4.1.20916.1.8.1.2.3.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Fahrenheit. | ||||
| Sdigital-sen3-3 | 1.3.6.1.4.1.20916.1.8.1.2.3.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog sensor, this value represents the current Voltage reading. If this is a Temp/Active Power sensor, this value represents the current power state (1=Power Detected, 0=No Power Detected). | ||||
| Sdigital-sen3-4 | 1.3.6.1.4.1.20916.1.8.1.2.3.4 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current custom reading. | ||||
| Sdigital-sen3-5 | 1.3.6.1.4.1.20916.1.8.1.2.3.5 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. | ||||
| Ndigital-sen4 | 1.3.6.1.4.1.20916.1.8.1.2.4 | |||
| Sdigital-sen4-1 | 1.3.6.1.4.1.20916.1.8.1.2.4.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Celsius. | ||||
| Sdigital-sen4-2 | 1.3.6.1.4.1.20916.1.8.1.2.4.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Fahrenheit. | ||||
| Sdigital-sen4-3 | 1.3.6.1.4.1.20916.1.8.1.2.4.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog sensor, this value represents the current Voltage reading. If this is a Temp/Active Power sensor, this value represents the current power state (1=Power Detected, 0=No Power Detected). | ||||
| Sdigital-sen4-4 | 1.3.6.1.4.1.20916.1.8.1.2.4.4 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current custom reading. | ||||
| Sdigital-sen4-5 | 1.3.6.1.4.1.20916.1.8.1.2.4.5 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. | ||||
| Ndigital-sen5 | 1.3.6.1.4.1.20916.1.8.1.2.5 | |||
| Sdigital-sen5-1 | 1.3.6.1.4.1.20916.1.8.1.2.5.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Celsius. | ||||
| Sdigital-sen5-2 | 1.3.6.1.4.1.20916.1.8.1.2.5.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Fahrenheit. | ||||
| Sdigital-sen5-3 | 1.3.6.1.4.1.20916.1.8.1.2.5.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog sensor, this value represents the current Voltage reading. If this is a Temp/Active Power sensor, this value represents the current power state (1=Power Detected, 0=No Power Detected). | ||||
| Sdigital-sen5-4 | 1.3.6.1.4.1.20916.1.8.1.2.5.4 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current custom reading. | ||||
| Sdigital-sen5-5 | 1.3.6.1.4.1.20916.1.8.1.2.5.5 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. | ||||
| Ndigital-sen6 | 1.3.6.1.4.1.20916.1.8.1.2.6 | |||
| Sdigital-sen6-1 | 1.3.6.1.4.1.20916.1.8.1.2.6.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Celsius. | ||||
| Sdigital-sen6-2 | 1.3.6.1.4.1.20916.1.8.1.2.6.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Fahrenheit. | ||||
| Sdigital-sen6-3 | 1.3.6.1.4.1.20916.1.8.1.2.6.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog sensor, this value represents the current Voltage reading. If this is a Temp/Active Power sensor, this value represents the current power state (1=Power Detected, 0=No Power Detected). | ||||
| Sdigital-sen6-4 | 1.3.6.1.4.1.20916.1.8.1.2.6.4 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current custom reading. | ||||
| Sdigital-sen6-5 | 1.3.6.1.4.1.20916.1.8.1.2.6.5 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. | ||||
| Ndigital-sen7 | 1.3.6.1.4.1.20916.1.8.1.2.7 | |||
| Sdigital-sen7-1 | 1.3.6.1.4.1.20916.1.8.1.2.7.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Celsius. | ||||
| Sdigital-sen7-2 | 1.3.6.1.4.1.20916.1.8.1.2.7.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Fahrenheit. | ||||
| Sdigital-sen7-3 | 1.3.6.1.4.1.20916.1.8.1.2.7.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog sensor, this value represents the current Voltage reading. If this is a Temp/Active Power sensor, this value represents the current power state (1=Power Detected, 0=No Power Detected). | ||||
| Sdigital-sen7-4 | 1.3.6.1.4.1.20916.1.8.1.2.7.4 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current custom reading. | ||||
| Sdigital-sen7-5 | 1.3.6.1.4.1.20916.1.8.1.2.7.5 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. | ||||
| Ndigital-sen8 | 1.3.6.1.4.1.20916.1.8.1.2.8 | |||
| Sdigital-sen8-1 | 1.3.6.1.4.1.20916.1.8.1.2.8.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Celsius. | ||||
| Sdigital-sen8-2 | 1.3.6.1.4.1.20916.1.8.1.2.8.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity, Temp/Analog, or Temp/Active Power sensor, this value represents the current temperature in Fahrenheit. | ||||
| Sdigital-sen8-3 | 1.3.6.1.4.1.20916.1.8.1.2.8.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog sensor, this value represents the current Voltage reading. If this is a Temp/Active Power sensor, this value represents the current power state (1=Power Detected, 0=No Power Detected). | ||||
| Sdigital-sen8-4 | 1.3.6.1.4.1.20916.1.8.1.2.8.4 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current custom reading. | ||||
| Sdigital-sen8-5 | 1.3.6.1.4.1.20916.1.8.1.2.8.5 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. | ||||
| Nswitch | 1.3.6.1.4.1.20916.1.8.1.3 | |||
| Sswitch-sen1 | 1.3.6.1.4.1.20916.1.8.1.3.1 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory The reading for switch sensor 1 (0 = OPEN, 1 = CLOSED). | ||||
| Sswitch-sen2 | 1.3.6.1.4.1.20916.1.8.1.3.2 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory The reading for switch sensor 2 (0 = OPEN, 1 = CLOSED). | ||||
| Sswitch-sen3 | 1.3.6.1.4.1.20916.1.8.1.3.3 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory The reading for switch sensor 3 (0 = OPEN, 1 = CLOSED). | ||||
| Sswitch-sen4 | 1.3.6.1.4.1.20916.1.8.1.3.4 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory The reading for switch sensor 4 (0 = OPEN, 1 = CLOSED). | ||||
| Sswitch-sen5 | 1.3.6.1.4.1.20916.1.8.1.3.5 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory The reading for switch sensor 5 (0 = OPEN, 1 = CLOSED). | ||||
| Sswitch-sen6 | 1.3.6.1.4.1.20916.1.8.1.3.6 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory The reading for switch sensor 6 (0 = OPEN, 1 = CLOSED). | ||||
| Sswitch-sen7 | 1.3.6.1.4.1.20916.1.8.1.3.7 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory The reading for switch sensor 7 (0 = OPEN, 1 = CLOSED). | ||||
| Sswitch-sen8 | 1.3.6.1.4.1.20916.1.8.1.3.8 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory The reading for switch sensor 8 (0 = OPEN, 1 = CLOSED). | ||||
| Sswitch-sen9 | 1.3.6.1.4.1.20916.1.8.1.3.9 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory The reading for switch sensor 9 (0 = OPEN, 1 = CLOSED). | ||||
| Sswitch-sen10 | 1.3.6.1.4.1.20916.1.8.1.3.10 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory The reading for switch sensor 10 (0 = OPEN, 1 = CLOSED). | ||||
| Sswitch-sen11 | 1.3.6.1.4.1.20916.1.8.1.3.11 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory The reading for switch sensor 11 (0 = OPEN, 1 = CLOSED). | ||||
| Sswitch-sen12 | 1.3.6.1.4.1.20916.1.8.1.3.12 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory The reading for switch sensor 12 (0 = OPEN, 1 = CLOSED). | ||||
| Sswitch-sen13 | 1.3.6.1.4.1.20916.1.8.1.3.13 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory The reading for switch sensor 13 (0 = OPEN, 1 = CLOSED). | ||||
| Sswitch-sen14 | 1.3.6.1.4.1.20916.1.8.1.3.14 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory The reading for switch sensor 14 (0 = OPEN, 1 = CLOSED). | ||||
| Sswitch-sen15 | 1.3.6.1.4.1.20916.1.8.1.3.15 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory The reading for switch sensor 15 (0 = OPEN, 1 = CLOSED). | ||||
| Sswitch-sen16 | 1.3.6.1.4.1.20916.1.8.1.3.16 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory The reading for switch sensor 16 (0 = OPEN, 1 = CLOSED). | ||||
| Nwireless | 1.3.6.1.4.1.20916.1.8.1.4 | |||
| Nwish-1 | 1.3.6.1.4.1.20916.1.8.1.4.1 | |||
| Swish-1-enabled | 1.3.6.1.4.1.20916.1.8.1.4.1.1 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled. | ||||
| Swish-1-serial-num | 1.3.6.1.4.1.20916.1.8.1.4.1.2 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory The unique serial number for this WiSH/WiSPR Sensor. | ||||
| Swish-1-updates | 1.3.6.1.4.1.20916.1.8.1.4.1.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current update interval for this WiSH/WiSPR Sensor. | ||||
| Nwish-1-sensors | 1.3.6.1.4.1.20916.1.8.1.4.1.4 | |||
| Nwish-1-internal | 1.3.6.1.4.1.20916.1.8.1.4.1.4.1 | |||
| Swish-1-battery-voltage | 1.3.6.1.4.1.20916.1.8.1.4.1.4.1.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current voltage reading of the internal battery for this WiSH/WiSPR Sensor. | ||||
| Swish-1-internal-tempc | 1.3.6.1.4.1.20916.1.8.1.4.1.4.1.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor. | ||||
| Swish-1-internal-tempf | 1.3.6.1.4.1.20916.1.8.1.4.1.4.1.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor. | ||||
| Nwish-1-external | 1.3.6.1.4.1.20916.1.8.1.4.1.4.2 | |||
| Nwish-1-external-1 | 1.3.6.1.4.1.20916.1.8.1.4.1.4.2.1 | |||
| Swish-1-external-1-type | 1.3.6.1.4.1.20916.1.8.1.4.1.4.2.1.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. | ||||
| Swish-1-external-1-val1 | 1.3.6.1.4.1.20916.1.8.1.4.1.4.2.1.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius. | ||||
| Swish-1-external-1-val2 | 1.3.6.1.4.1.20916.1.8.1.4.1.4.2.1.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit. | ||||
| Swish-1-external-1-val3 | 1.3.6.1.4.1.20916.1.8.1.4.1.4.2.1.4 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts. | ||||
| Swish-1-external-1-val4 | 1.3.6.1.4.1.20916.1.8.1.4.1.4.2.1.5 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value. | ||||
| Swish-1-external-1-val5 | 1.3.6.1.4.1.20916.1.8.1.4.1.4.2.1.6 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. | ||||
| Nwish-1-external-2 | 1.3.6.1.4.1.20916.1.8.1.4.1.4.2.2 | |||
| Swish-1-external-2-type | 1.3.6.1.4.1.20916.1.8.1.4.1.4.2.2.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. | ||||
| Swish-1-external-2-val1 | 1.3.6.1.4.1.20916.1.8.1.4.1.4.2.2.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius. | ||||
| Swish-1-external-2-val2 | 1.3.6.1.4.1.20916.1.8.1.4.1.4.2.2.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit. | ||||
| Swish-1-external-2-val3 | 1.3.6.1.4.1.20916.1.8.1.4.1.4.2.2.4 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts. | ||||
| Swish-1-external-2-val4 | 1.3.6.1.4.1.20916.1.8.1.4.1.4.2.2.5 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value. | ||||
| Swish-1-external-2-val5 | 1.3.6.1.4.1.20916.1.8.1.4.1.4.2.2.6 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. | ||||
| Swish-1-external-switch | 1.3.6.1.4.1.20916.1.8.1.4.1.4.2.3 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED). | ||||
| Nwish-2 | 1.3.6.1.4.1.20916.1.8.1.4.2 | |||
| Swish-2-enabled | 1.3.6.1.4.1.20916.1.8.1.4.2.1 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled. | ||||
| Swish-2-serial-num | 1.3.6.1.4.1.20916.1.8.1.4.2.2 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory The unique serial number for this WiSH/WiSPR Sensor. | ||||
| Swish-2-updates | 1.3.6.1.4.1.20916.1.8.1.4.2.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current update interval for this WiSH/WiSPR Sensor. | ||||
| Nwish-2-sensors | 1.3.6.1.4.1.20916.1.8.1.4.2.4 | |||
| Nwish-2-internal | 1.3.6.1.4.1.20916.1.8.1.4.2.4.1 | |||
| Swish-2-battery-voltage | 1.3.6.1.4.1.20916.1.8.1.4.2.4.1.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current voltage reading of the internal battery for this WiSH/WiSPR Sensor. | ||||
| Swish-2-internal-tempc | 1.3.6.1.4.1.20916.1.8.1.4.2.4.1.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor. | ||||
| Swish-2-internal-tempf | 1.3.6.1.4.1.20916.1.8.1.4.2.4.1.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor. | ||||
| Nwish-2-external | 1.3.6.1.4.1.20916.1.8.1.4.2.4.2 | |||
| Nwish-2-external-1 | 1.3.6.1.4.1.20916.1.8.1.4.2.4.2.1 | |||
| Swish-2-external-1-type | 1.3.6.1.4.1.20916.1.8.1.4.2.4.2.1.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. | ||||
| Swish-2-external-1-val1 | 1.3.6.1.4.1.20916.1.8.1.4.2.4.2.1.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius. | ||||
| Swish-2-external-1-val2 | 1.3.6.1.4.1.20916.1.8.1.4.2.4.2.1.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit. | ||||
| Swish-2-external-1-val3 | 1.3.6.1.4.1.20916.1.8.1.4.2.4.2.1.4 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts. | ||||
| Swish-2-external-1-val4 | 1.3.6.1.4.1.20916.1.8.1.4.2.4.2.1.5 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value. | ||||
| Swish-2-external-1-val5 | 1.3.6.1.4.1.20916.1.8.1.4.2.4.2.1.6 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. | ||||
| Nwish-2-external-2 | 1.3.6.1.4.1.20916.1.8.1.4.2.4.2.2 | |||
| Swish-2-external-2-type | 1.3.6.1.4.1.20916.1.8.1.4.2.4.2.2.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. | ||||
| Swish-2-external-2-val1 | 1.3.6.1.4.1.20916.1.8.1.4.2.4.2.2.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius. | ||||
| Swish-2-external-2-val2 | 1.3.6.1.4.1.20916.1.8.1.4.2.4.2.2.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit. | ||||
| Swish-2-external-2-val3 | 1.3.6.1.4.1.20916.1.8.1.4.2.4.2.2.4 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts. | ||||
| Swish-2-external-2-val4 | 1.3.6.1.4.1.20916.1.8.1.4.2.4.2.2.5 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value. | ||||
| Swish-2-external-2-val5 | 1.3.6.1.4.1.20916.1.8.1.4.2.4.2.2.6 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. | ||||
| Swish-2-external-switch | 1.3.6.1.4.1.20916.1.8.1.4.2.4.2.3 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED). | ||||
| Nwish-3 | 1.3.6.1.4.1.20916.1.8.1.4.3 | |||
| Swish-3-enabled | 1.3.6.1.4.1.20916.1.8.1.4.3.1 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled. | ||||
| Swish-3-serial-num | 1.3.6.1.4.1.20916.1.8.1.4.3.2 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory The unique serial number for this WiSH/WiSPR Sensor. | ||||
| Swish-3-updates | 1.3.6.1.4.1.20916.1.8.1.4.3.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current update interval for this WiSH/WiSPR Sensor. | ||||
| Nwish-3-sensors | 1.3.6.1.4.1.20916.1.8.1.4.3.4 | |||
| Nwish-3-internal | 1.3.6.1.4.1.20916.1.8.1.4.3.4.1 | |||
| Swish-3-battery-voltage | 1.3.6.1.4.1.20916.1.8.1.4.3.4.1.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current voltage reading of the internal battery for this WiSH/WiSPR Sensor. | ||||
| Swish-3-internal-tempc | 1.3.6.1.4.1.20916.1.8.1.4.3.4.1.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor. | ||||
| Swish-3-internal-tempf | 1.3.6.1.4.1.20916.1.8.1.4.3.4.1.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor. | ||||
| Nwish-3-external | 1.3.6.1.4.1.20916.1.8.1.4.3.4.2 | |||
| Nwish-3-external-1 | 1.3.6.1.4.1.20916.1.8.1.4.3.4.2.1 | |||
| Swish-3-external-1-type | 1.3.6.1.4.1.20916.1.8.1.4.3.4.2.1.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. | ||||
| Swish-3-external-1-val1 | 1.3.6.1.4.1.20916.1.8.1.4.3.4.2.1.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius. | ||||
| Swish-3-external-1-val2 | 1.3.6.1.4.1.20916.1.8.1.4.3.4.2.1.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit. | ||||
| Swish-3-external-1-val3 | 1.3.6.1.4.1.20916.1.8.1.4.3.4.2.1.4 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts. | ||||
| Swish-3-external-1-val4 | 1.3.6.1.4.1.20916.1.8.1.4.3.4.2.1.5 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value. | ||||
| Swish-3-external-1-val5 | 1.3.6.1.4.1.20916.1.8.1.4.3.4.2.1.6 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. | ||||
| Nwish-3-external-2 | 1.3.6.1.4.1.20916.1.8.1.4.3.4.2.2 | |||
| Swish-3-external-2-type | 1.3.6.1.4.1.20916.1.8.1.4.3.4.2.2.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. | ||||
| Swish-3-external-2-val1 | 1.3.6.1.4.1.20916.1.8.1.4.3.4.2.2.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius. | ||||
| Swish-3-external-2-val2 | 1.3.6.1.4.1.20916.1.8.1.4.3.4.2.2.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit. | ||||
| Swish-3-external-2-val3 | 1.3.6.1.4.1.20916.1.8.1.4.3.4.2.2.4 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts. | ||||
| Swish-3-external-2-val4 | 1.3.6.1.4.1.20916.1.8.1.4.3.4.2.2.5 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value. | ||||
| Swish-3-external-2-val5 | 1.3.6.1.4.1.20916.1.8.1.4.3.4.2.2.6 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. | ||||
| Swish-3-external-switch | 1.3.6.1.4.1.20916.1.8.1.4.3.4.2.3 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED). | ||||
| Nwish-4 | 1.3.6.1.4.1.20916.1.8.1.4.4 | |||
| Swish-4-enabled | 1.3.6.1.4.1.20916.1.8.1.4.4.1 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled. | ||||
| Swish-4-serial-num | 1.3.6.1.4.1.20916.1.8.1.4.4.2 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory The unique serial number for this WiSH/WiSPR Sensor. | ||||
| Swish-4-updates | 1.3.6.1.4.1.20916.1.8.1.4.4.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current update interval for this WiSH/WiSPR Sensor. | ||||
| Nwish-4-sensors | 1.3.6.1.4.1.20916.1.8.1.4.4.4 | |||
| Nwish-4-internal | 1.3.6.1.4.1.20916.1.8.1.4.4.4.1 | |||
| Swish-4-battery-voltage | 1.3.6.1.4.1.20916.1.8.1.4.4.4.1.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current voltage reading of the internal battery for this WiSH/WiSPR Sensor. | ||||
| Swish-4-internal-tempc | 1.3.6.1.4.1.20916.1.8.1.4.4.4.1.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor. | ||||
| Swish-4-internal-tempf | 1.3.6.1.4.1.20916.1.8.1.4.4.4.1.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor. | ||||
| Nwish-4-external | 1.3.6.1.4.1.20916.1.8.1.4.4.4.2 | |||
| Nwish-4-external-1 | 1.3.6.1.4.1.20916.1.8.1.4.4.4.2.1 | |||
| Swish-4-external-1-type | 1.3.6.1.4.1.20916.1.8.1.4.4.4.2.1.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. | ||||
| Swish-4-external-1-val1 | 1.3.6.1.4.1.20916.1.8.1.4.4.4.2.1.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius. | ||||
| Swish-4-external-1-val2 | 1.3.6.1.4.1.20916.1.8.1.4.4.4.2.1.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit. | ||||
| Swish-4-external-1-val3 | 1.3.6.1.4.1.20916.1.8.1.4.4.4.2.1.4 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts. | ||||
| Swish-4-external-1-val4 | 1.3.6.1.4.1.20916.1.8.1.4.4.4.2.1.5 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value. | ||||
| Swish-4-external-1-val5 | 1.3.6.1.4.1.20916.1.8.1.4.4.4.2.1.6 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. | ||||
| Nwish-4-external-2 | 1.3.6.1.4.1.20916.1.8.1.4.4.4.2.2 | |||
| Swish-4-external-2-type | 1.3.6.1.4.1.20916.1.8.1.4.4.4.2.2.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. | ||||
| Swish-4-external-2-val1 | 1.3.6.1.4.1.20916.1.8.1.4.4.4.2.2.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius. | ||||
| Swish-4-external-2-val2 | 1.3.6.1.4.1.20916.1.8.1.4.4.4.2.2.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit. | ||||
| Swish-4-external-2-val3 | 1.3.6.1.4.1.20916.1.8.1.4.4.4.2.2.4 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts. | ||||
| Swish-4-external-2-val4 | 1.3.6.1.4.1.20916.1.8.1.4.4.4.2.2.5 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value. | ||||
| Swish-4-external-2-val5 | 1.3.6.1.4.1.20916.1.8.1.4.4.4.2.2.6 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. | ||||
| Swish-4-external-switch | 1.3.6.1.4.1.20916.1.8.1.4.4.4.2.3 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED). | ||||
| Nwish-5 | 1.3.6.1.4.1.20916.1.8.1.4.5 | |||
| Swish-5-enabled | 1.3.6.1.4.1.20916.1.8.1.4.5.1 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled. | ||||
| Swish-5-serial-num | 1.3.6.1.4.1.20916.1.8.1.4.5.2 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory The unique serial number for this WiSH/WiSPR Sensor. | ||||
| Swish-5-updates | 1.3.6.1.4.1.20916.1.8.1.4.5.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current update interval for this WiSH/WiSPR Sensor. | ||||
| Nwish-5-sensors | 1.3.6.1.4.1.20916.1.8.1.4.5.4 | |||
| Nwish-5-internal | 1.3.6.1.4.1.20916.1.8.1.4.5.4.1 | |||
| Swish-5-battery-voltage | 1.3.6.1.4.1.20916.1.8.1.4.5.4.1.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current voltage reading of the internal battery for this WiSH/WiSPR Sensor. | ||||
| Swish-5-internal-tempc | 1.3.6.1.4.1.20916.1.8.1.4.5.4.1.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor. | ||||
| Swish-5-internal-tempf | 1.3.6.1.4.1.20916.1.8.1.4.5.4.1.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor. | ||||
| Nwish-5-external | 1.3.6.1.4.1.20916.1.8.1.4.5.4.2 | |||
| Nwish-5-external-1 | 1.3.6.1.4.1.20916.1.8.1.4.5.4.2.1 | |||
| Swish-5-external-1-type | 1.3.6.1.4.1.20916.1.8.1.4.5.4.2.1.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. | ||||
| Swish-5-external-1-val1 | 1.3.6.1.4.1.20916.1.8.1.4.5.4.2.1.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius. | ||||
| Swish-5-external-1-val2 | 1.3.6.1.4.1.20916.1.8.1.4.5.4.2.1.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit. | ||||
| Swish-5-external-1-val3 | 1.3.6.1.4.1.20916.1.8.1.4.5.4.2.1.4 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts. | ||||
| Swish-5-external-1-val4 | 1.3.6.1.4.1.20916.1.8.1.4.5.4.2.1.5 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value. | ||||
| Swish-5-external-1-val5 | 1.3.6.1.4.1.20916.1.8.1.4.5.4.2.1.6 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. | ||||
| Nwish-5-external-2 | 1.3.6.1.4.1.20916.1.8.1.4.5.4.2.2 | |||
| Swish-5-external-2-type | 1.3.6.1.4.1.20916.1.8.1.4.5.4.2.2.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. | ||||
| Swish-5-external-2-val1 | 1.3.6.1.4.1.20916.1.8.1.4.5.4.2.2.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius. | ||||
| Swish-5-external-2-val2 | 1.3.6.1.4.1.20916.1.8.1.4.5.4.2.2.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit. | ||||
| Swish-5-external-2-val3 | 1.3.6.1.4.1.20916.1.8.1.4.5.4.2.2.4 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts. | ||||
| Swish-5-external-2-val4 | 1.3.6.1.4.1.20916.1.8.1.4.5.4.2.2.5 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value. | ||||
| Swish-5-external-2-val5 | 1.3.6.1.4.1.20916.1.8.1.4.5.4.2.2.6 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. | ||||
| Swish-5-external-switch | 1.3.6.1.4.1.20916.1.8.1.4.5.4.2.3 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED). | ||||
| Nwish-6 | 1.3.6.1.4.1.20916.1.8.1.4.6 | |||
| Swish-6-enabled | 1.3.6.1.4.1.20916.1.8.1.4.6.1 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled. | ||||
| Swish-6-serial-num | 1.3.6.1.4.1.20916.1.8.1.4.6.2 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory The unique serial number for this WiSH/WiSPR Sensor. | ||||
| Swish-6-updates | 1.3.6.1.4.1.20916.1.8.1.4.6.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current update interval for this WiSH/WiSPR Sensor. | ||||
| Nwish-6-sensors | 1.3.6.1.4.1.20916.1.8.1.4.6.4 | |||
| Nwish-6-internal | 1.3.6.1.4.1.20916.1.8.1.4.6.4.1 | |||
| Swish-6-battery-voltage | 1.3.6.1.4.1.20916.1.8.1.4.6.4.1.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current voltage reading of the internal battery for this WiSH/WiSPR Sensor. | ||||
| Swish-6-internal-tempc | 1.3.6.1.4.1.20916.1.8.1.4.6.4.1.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor. | ||||
| Swish-6-internal-tempf | 1.3.6.1.4.1.20916.1.8.1.4.6.4.1.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor. | ||||
| Nwish-6-external | 1.3.6.1.4.1.20916.1.8.1.4.6.4.2 | |||
| Nwish-6-external-1 | 1.3.6.1.4.1.20916.1.8.1.4.6.4.2.1 | |||
| Swish-6-external-1-type | 1.3.6.1.4.1.20916.1.8.1.4.6.4.2.1.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. | ||||
| Swish-6-external-1-val1 | 1.3.6.1.4.1.20916.1.8.1.4.6.4.2.1.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius. | ||||
| Swish-6-external-1-val2 | 1.3.6.1.4.1.20916.1.8.1.4.6.4.2.1.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit. | ||||
| Swish-6-external-1-val3 | 1.3.6.1.4.1.20916.1.8.1.4.6.4.2.1.4 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts. | ||||
| Swish-6-external-1-val4 | 1.3.6.1.4.1.20916.1.8.1.4.6.4.2.1.5 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value. | ||||
| Swish-6-external-1-val5 | 1.3.6.1.4.1.20916.1.8.1.4.6.4.2.1.6 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. | ||||
| Nwish-6-external-2 | 1.3.6.1.4.1.20916.1.8.1.4.6.4.2.2 | |||
| Swish-6-external-2-type | 1.3.6.1.4.1.20916.1.8.1.4.6.4.2.2.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. | ||||
| Swish-6-external-2-val1 | 1.3.6.1.4.1.20916.1.8.1.4.6.4.2.2.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius. | ||||
| Swish-6-external-2-val2 | 1.3.6.1.4.1.20916.1.8.1.4.6.4.2.2.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit. | ||||
| Swish-6-external-2-val3 | 1.3.6.1.4.1.20916.1.8.1.4.6.4.2.2.4 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts. | ||||
| Swish-6-external-2-val4 | 1.3.6.1.4.1.20916.1.8.1.4.6.4.2.2.5 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value. | ||||
| Swish-6-external-2-val5 | 1.3.6.1.4.1.20916.1.8.1.4.6.4.2.2.6 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. | ||||
| Swish-6-external-switch | 1.3.6.1.4.1.20916.1.8.1.4.6.4.2.3 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED). | ||||
| Nwish-7 | 1.3.6.1.4.1.20916.1.8.1.4.7 | |||
| Swish-7-enabled | 1.3.6.1.4.1.20916.1.8.1.4.7.1 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled. | ||||
| Swish-7-serial-num | 1.3.6.1.4.1.20916.1.8.1.4.7.2 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory The unique serial number for this WiSH/WiSPR Sensor. | ||||
| Swish-7-updates | 1.3.6.1.4.1.20916.1.8.1.4.7.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current update interval for this WiSH/WiSPR Sensor. | ||||
| Nwish-7-sensors | 1.3.6.1.4.1.20916.1.8.1.4.7.4 | |||
| Nwish-7-internal | 1.3.6.1.4.1.20916.1.8.1.4.7.4.1 | |||
| Swish-7-battery-voltage | 1.3.6.1.4.1.20916.1.8.1.4.7.4.1.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current voltage reading of the internal battery for this WiSH/WiSPR Sensor. | ||||
| Swish-7-internal-tempc | 1.3.6.1.4.1.20916.1.8.1.4.7.4.1.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor. | ||||
| Swish-7-internal-tempf | 1.3.6.1.4.1.20916.1.8.1.4.7.4.1.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor. | ||||
| Nwish-7-external | 1.3.6.1.4.1.20916.1.8.1.4.7.4.2 | |||
| Nwish-7-external-1 | 1.3.6.1.4.1.20916.1.8.1.4.7.4.2.1 | |||
| Swish-7-external-1-type | 1.3.6.1.4.1.20916.1.8.1.4.7.4.2.1.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. | ||||
| Swish-7-external-1-val1 | 1.3.6.1.4.1.20916.1.8.1.4.7.4.2.1.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius. | ||||
| Swish-7-external-1-val2 | 1.3.6.1.4.1.20916.1.8.1.4.7.4.2.1.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit. | ||||
| Swish-7-external-1-val3 | 1.3.6.1.4.1.20916.1.8.1.4.7.4.2.1.4 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts. | ||||
| Swish-7-external-1-val4 | 1.3.6.1.4.1.20916.1.8.1.4.7.4.2.1.5 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value. | ||||
| Swish-7-external-1-val5 | 1.3.6.1.4.1.20916.1.8.1.4.7.4.2.1.6 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. | ||||
| Nwish-7-external-2 | 1.3.6.1.4.1.20916.1.8.1.4.7.4.2.2 | |||
| Swish-7-external-2-type | 1.3.6.1.4.1.20916.1.8.1.4.7.4.2.2.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. | ||||
| Swish-7-external-2-val1 | 1.3.6.1.4.1.20916.1.8.1.4.7.4.2.2.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius. | ||||
| Swish-7-external-2-val2 | 1.3.6.1.4.1.20916.1.8.1.4.7.4.2.2.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit. | ||||
| Swish-7-external-2-val3 | 1.3.6.1.4.1.20916.1.8.1.4.7.4.2.2.4 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts. | ||||
| Swish-7-external-2-val4 | 1.3.6.1.4.1.20916.1.8.1.4.7.4.2.2.5 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value. | ||||
| Swish-7-external-2-val5 | 1.3.6.1.4.1.20916.1.8.1.4.7.4.2.2.6 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. | ||||
| Swish-7-external-switch | 1.3.6.1.4.1.20916.1.8.1.4.7.4.2.3 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED). | ||||
| Nwish-8 | 1.3.6.1.4.1.20916.1.8.1.4.8 | |||
| Swish-8-enabled | 1.3.6.1.4.1.20916.1.8.1.4.8.1 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled. | ||||
| Swish-8-serial-num | 1.3.6.1.4.1.20916.1.8.1.4.8.2 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory The unique serial number for this WiSH/WiSPR Sensor. | ||||
| Swish-8-updates | 1.3.6.1.4.1.20916.1.8.1.4.8.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current update interval for this WiSH/WiSPR Sensor. | ||||
| Nwish-8-sensors | 1.3.6.1.4.1.20916.1.8.1.4.8.4 | |||
| Nwish-8-internal | 1.3.6.1.4.1.20916.1.8.1.4.8.4.1 | |||
| Swish-8-battery-voltage | 1.3.6.1.4.1.20916.1.8.1.4.8.4.1.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current voltage reading of the internal battery for this WiSH/WiSPR Sensor. | ||||
| Swish-8-internal-tempc | 1.3.6.1.4.1.20916.1.8.1.4.8.4.1.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor. | ||||
| Swish-8-internal-tempf | 1.3.6.1.4.1.20916.1.8.1.4.8.4.1.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor. | ||||
| Nwish-8-external | 1.3.6.1.4.1.20916.1.8.1.4.8.4.2 | |||
| Nwish-8-external-1 | 1.3.6.1.4.1.20916.1.8.1.4.8.4.2.1 | |||
| Swish-8-external-1-type | 1.3.6.1.4.1.20916.1.8.1.4.8.4.2.1.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. | ||||
| Swish-8-external-1-val1 | 1.3.6.1.4.1.20916.1.8.1.4.8.4.2.1.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius. | ||||
| Swish-8-external-1-val2 | 1.3.6.1.4.1.20916.1.8.1.4.8.4.2.1.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit. | ||||
| Swish-8-external-1-val3 | 1.3.6.1.4.1.20916.1.8.1.4.8.4.2.1.4 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts. | ||||
| Swish-8-external-1-val4 | 1.3.6.1.4.1.20916.1.8.1.4.8.4.2.1.5 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value. | ||||
| Swish-8-external-1-val5 | 1.3.6.1.4.1.20916.1.8.1.4.8.4.2.1.6 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. | ||||
| Nwish-8-external-2 | 1.3.6.1.4.1.20916.1.8.1.4.8.4.2.2 | |||
| Swish-8-external-2-type | 1.3.6.1.4.1.20916.1.8.1.4.8.4.2.2.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. | ||||
| Swish-8-external-2-val1 | 1.3.6.1.4.1.20916.1.8.1.4.8.4.2.2.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius. | ||||
| Swish-8-external-2-val2 | 1.3.6.1.4.1.20916.1.8.1.4.8.4.2.2.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit. | ||||
| Swish-8-external-2-val3 | 1.3.6.1.4.1.20916.1.8.1.4.8.4.2.2.4 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts. | ||||
| Swish-8-external-2-val4 | 1.3.6.1.4.1.20916.1.8.1.4.8.4.2.2.5 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value. | ||||
| Swish-8-external-2-val5 | 1.3.6.1.4.1.20916.1.8.1.4.8.4.2.2.6 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. | ||||
| Swish-8-external-switch | 1.3.6.1.4.1.20916.1.8.1.4.8.4.2.3 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED). | ||||
| Nwish-9 | 1.3.6.1.4.1.20916.1.8.1.4.9 | |||
| Swish-9-enabled | 1.3.6.1.4.1.20916.1.8.1.4.9.1 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled. | ||||
| Swish-9-serial-num | 1.3.6.1.4.1.20916.1.8.1.4.9.2 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory The unique serial number for this WiSH/WiSPR Sensor. | ||||
| Swish-9-updates | 1.3.6.1.4.1.20916.1.8.1.4.9.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current update interval for this WiSH/WiSPR Sensor. | ||||
| Nwish-9-sensors | 1.3.6.1.4.1.20916.1.8.1.4.9.4 | |||
| Nwish-9-internal | 1.3.6.1.4.1.20916.1.8.1.4.9.4.1 | |||
| Swish-9-battery-voltage | 1.3.6.1.4.1.20916.1.8.1.4.9.4.1.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current voltage reading of the internal battery for this WiSH/WiSPR Sensor. | ||||
| Swish-9-internal-tempc | 1.3.6.1.4.1.20916.1.8.1.4.9.4.1.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor. | ||||
| Swish-9-internal-tempf | 1.3.6.1.4.1.20916.1.8.1.4.9.4.1.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor. | ||||
| Nwish-9-external | 1.3.6.1.4.1.20916.1.8.1.4.9.4.2 | |||
| Nwish-9-external-1 | 1.3.6.1.4.1.20916.1.8.1.4.9.4.2.1 | |||
| Swish-9-external-1-type | 1.3.6.1.4.1.20916.1.8.1.4.9.4.2.1.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. | ||||
| Swish-9-external-1-val1 | 1.3.6.1.4.1.20916.1.8.1.4.9.4.2.1.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius. | ||||
| Swish-9-external-1-val2 | 1.3.6.1.4.1.20916.1.8.1.4.9.4.2.1.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit. | ||||
| Swish-9-external-1-val3 | 1.3.6.1.4.1.20916.1.8.1.4.9.4.2.1.4 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts. | ||||
| Swish-9-external-1-val4 | 1.3.6.1.4.1.20916.1.8.1.4.9.4.2.1.5 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value. | ||||
| Swish-9-external-1-val5 | 1.3.6.1.4.1.20916.1.8.1.4.9.4.2.1.6 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. | ||||
| Nwish-9-external-2 | 1.3.6.1.4.1.20916.1.8.1.4.9.4.2.2 | |||
| Swish-9-external-2-type | 1.3.6.1.4.1.20916.1.8.1.4.9.4.2.2.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. | ||||
| Swish-9-external-2-val1 | 1.3.6.1.4.1.20916.1.8.1.4.9.4.2.2.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius. | ||||
| Swish-9-external-2-val2 | 1.3.6.1.4.1.20916.1.8.1.4.9.4.2.2.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit. | ||||
| Swish-9-external-2-val3 | 1.3.6.1.4.1.20916.1.8.1.4.9.4.2.2.4 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts. | ||||
| Swish-9-external-2-val4 | 1.3.6.1.4.1.20916.1.8.1.4.9.4.2.2.5 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value. | ||||
| Swish-9-external-2-val5 | 1.3.6.1.4.1.20916.1.8.1.4.9.4.2.2.6 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. | ||||
| Swish-9-external-switch | 1.3.6.1.4.1.20916.1.8.1.4.9.4.2.3 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED). | ||||
| Nwish-10 | 1.3.6.1.4.1.20916.1.8.1.4.10 | |||
| Swish-10-enabled | 1.3.6.1.4.1.20916.1.8.1.4.10.1 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory The current 'enabled' status for this WiSH/WiSPR Sensor. A '0' indicates the WiSH/WiSPR is disabled. A '1' indicates the WiSH/WiSPR is enabled. | ||||
| Swish-10-serial-num | 1.3.6.1.4.1.20916.1.8.1.4.10.2 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory The unique serial number for this WiSH/WiSPR Sensor. | ||||
| Swish-10-updates | 1.3.6.1.4.1.20916.1.8.1.4.10.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current update interval for this WiSH/WiSPR Sensor. | ||||
| Nwish-10-sensors | 1.3.6.1.4.1.20916.1.8.1.4.10.4 | |||
| Nwish-10-internal | 1.3.6.1.4.1.20916.1.8.1.4.10.4.1 | |||
| Swish-10-battery-voltage | 1.3.6.1.4.1.20916.1.8.1.4.10.4.1.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current voltage reading of the internal battery for this WiSH/WiSPR Sensor. | ||||
| Swish-10-internal-tempc | 1.3.6.1.4.1.20916.1.8.1.4.10.4.1.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current temperature of the internal sensor in Celsius (C) for this WiSH/WiSPR Sensor. | ||||
| Swish-10-internal-tempf | 1.3.6.1.4.1.20916.1.8.1.4.10.4.1.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The current temperature of the internal sensor in Fahrenheit (F) for this WiSH/WiSPR Sensor. | ||||
| Nwish-10-external | 1.3.6.1.4.1.20916.1.8.1.4.10.4.2 | |||
| Nwish-10-external-1 | 1.3.6.1.4.1.20916.1.8.1.4.10.4.2.1 | |||
| Swish-10-external-1-type | 1.3.6.1.4.1.20916.1.8.1.4.10.4.2.1.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. | ||||
| Swish-10-external-1-val1 | 1.3.6.1.4.1.20916.1.8.1.4.10.4.2.1.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius. | ||||
| Swish-10-external-1-val2 | 1.3.6.1.4.1.20916.1.8.1.4.10.4.2.1.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit. | ||||
| Swish-10-external-1-val3 | 1.3.6.1.4.1.20916.1.8.1.4.10.4.2.1.4 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts. | ||||
| Swish-10-external-1-val4 | 1.3.6.1.4.1.20916.1.8.1.4.10.4.2.1.5 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value. | ||||
| Swish-10-external-1-val5 | 1.3.6.1.4.1.20916.1.8.1.4.10.4.2.1.6 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. | ||||
| Nwish-10-external-2 | 1.3.6.1.4.1.20916.1.8.1.4.10.4.2.2 | |||
| Swish-10-external-2-type | 1.3.6.1.4.1.20916.1.8.1.4.10.4.2.2.1 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory The sensor type of the digital sensor attached to this digital sensor port on the WiSH/WiSPR Sensor. | ||||
| Swish-10-external-2-val1 | 1.3.6.1.4.1.20916.1.8.1.4.10.4.2.2.2 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Celsius. | ||||
| Swish-10-external-2-val2 | 1.3.6.1.4.1.20916.1.8.1.4.10.4.2.2.3 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temperature, Temp/Humidity or Temp/Analog sensor, this value represents the current temperature in Fahrenheit. | ||||
| Swish-10-external-2-val3 | 1.3.6.1.4.1.20916.1.8.1.4.10.4.2.2.4 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current relative humidity in % Relative Humidity. If this sensor is a Temp/Analog Sensor, this value represents the Voltage reading in Volts. | ||||
| Swish-10-external-2-val4 | 1.3.6.1.4.1.20916.1.8.1.4.10.4.2.2.5 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Fahrenheit. If this sensor is a Temp/Analog sensor, this value represents the current Custom Value. | ||||
| Swish-10-external-2-val5 | 1.3.6.1.4.1.20916.1.8.1.4.10.4.2.2.6 | INTEGER (0..65535) | RO | mandatory |
scalar · INTEGER (0..65535) · read-only · mandatory If this sensor is a Temp/Humidity sensor, this value represents the current heat index in Celsius. | ||||
| Swish-10-external-switch | 1.3.6.1.4.1.20916.1.8.1.4.10.4.2.3 | INTEGER (0..1) | RO | mandatory |
scalar · INTEGER (0..1) · read-only · mandatory The reading for switch sensor contacts of this WiSH/WiSPR Sensor (0 = OPEN, 1 = CLOSED). | ||||
| Nwish-11 | 1.3.6.1.4.1.20916.1.8.1.4.11 | |||
| Nwish-11-sensors | 1.3.6.1.4.1.20916.1.8.1.4.11.4 | |||
| Nwish-11-internal | 1.3.6.1.4.1.20916.1.8.1.4.11.4.1 | |||
| Nwish-11-external | 1.3.6.1.4.1.20916.1.8.1.4.11.4.2 | |||
| Nwish-11-external-1 | 1.3.6.1.4.1.20916.1.8.1.4.11.4.2.1 | |||
| Nwish-11-external-2 | 1.3.6.1.4.1.20916.1.8.1.4.11.4.2.2 | |||
| Nwish-12 | 1.3.6.1.4.1.20916.1.8.1.4.12 | |||
| Nwish-12-sensors | 1.3.6.1.4.1.20916.1.8.1.4.12.4 | |||
| Nwish-12-internal | 1.3.6.1.4.1.20916.1.8.1.4.12.4.1 | |||
| Nwish-12-external | 1.3.6.1.4.1.20916.1.8.1.4.12.4.2 | |||
| Nwish-12-external-1 | 1.3.6.1.4.1.20916.1.8.1.4.12.4.2.1 | |||
| Nwish-12-external-2 | 1.3.6.1.4.1.20916.1.8.1.4.12.4.2.2 | |||
| Nwish-13 | 1.3.6.1.4.1.20916.1.8.1.4.13 | |||
| Nwish-13-sensors | 1.3.6.1.4.1.20916.1.8.1.4.13.4 | |||
| Nwish-13-internal | 1.3.6.1.4.1.20916.1.8.1.4.13.4.1 | |||
| Nwish-13-external | 1.3.6.1.4.1.20916.1.8.1.4.13.4.2 | |||
| Nwish-13-external-1 | 1.3.6.1.4.1.20916.1.8.1.4.13.4.2.1 | |||
| Nwish-13-external-2 | 1.3.6.1.4.1.20916.1.8.1.4.13.4.2.2 | |||
| Nwish-14 | 1.3.6.1.4.1.20916.1.8.1.4.14 | |||
| Nwish-14-sensors | 1.3.6.1.4.1.20916.1.8.1.4.14.4 | |||
| Nwish-14-internal | 1.3.6.1.4.1.20916.1.8.1.4.14.4.1 | |||
| Nwish-14-external | 1.3.6.1.4.1.20916.1.8.1.4.14.4.2 | |||
| Nwish-14-external-1 | 1.3.6.1.4.1.20916.1.8.1.4.14.4.2.1 | |||
| Nwish-14-external-2 | 1.3.6.1.4.1.20916.1.8.1.4.14.4.2.2 | |||
| Nwish-15 | 1.3.6.1.4.1.20916.1.8.1.4.15 | |||
| Nwish-15-sensors | 1.3.6.1.4.1.20916.1.8.1.4.15.4 | |||
| Nwish-15-internal | 1.3.6.1.4.1.20916.1.8.1.4.15.4.1 | |||
| Nwish-15-external | 1.3.6.1.4.1.20916.1.8.1.4.15.4.2 | |||
| Nwish-15-external-1 | 1.3.6.1.4.1.20916.1.8.1.4.15.4.2.1 | |||
| Nwish-15-external-2 | 1.3.6.1.4.1.20916.1.8.1.4.15.4.2.2 | |||
| Ntraps | 1.3.6.1.4.1.20916.1.8.2 | |||
| Salarmmessage | 1.3.6.1.4.1.20916.1.8.2.1 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory Last Alarm Message | ||||
| Nlighttowers | 1.3.6.1.4.1.20916.1.8.3 | |||
| Nlighttower1 | 1.3.6.1.4.1.20916.1.8.3.1 | |||
| Slighttower1-RE | 1.3.6.1.4.1.20916.1.8.3.1.1 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory The status of the red LED on the Light Tower. | ||||
| Slighttower1-OR | 1.3.6.1.4.1.20916.1.8.3.1.2 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory The status of the orange LED on the Light Tower. | ||||
| Slighttower1-GR | 1.3.6.1.4.1.20916.1.8.3.1.3 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory The status of the green LED on the Light Tower. | ||||
| Slighttower1-WH | 1.3.6.1.4.1.20916.1.8.3.1.4 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory The status of the white LED on the Light Tower. | ||||
| Slighttower1-BL | 1.3.6.1.4.1.20916.1.8.3.1.5 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory The status of the blue LED on the Light Tower. | ||||
| Slighttower1-A1 | 1.3.6.1.4.1.20916.1.8.3.1.6 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory The status of the 1st audio alarm on the Light Tower. | ||||
| Slighttower1-A2 | 1.3.6.1.4.1.20916.1.8.3.1.7 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory The status of the 2nd audio alarm on the Light Tower. | ||||
| Slighttower1-RL | 1.3.6.1.4.1.20916.1.8.3.1.8 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory The status of the LTA's on-board relay output | ||||
| Nlighttower2 | 1.3.6.1.4.1.20916.1.8.3.2 | |||
| Slighttower2-RE | 1.3.6.1.4.1.20916.1.8.3.2.1 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory The status of the red LED on the Light Tower. | ||||
| Slighttower2-OR | 1.3.6.1.4.1.20916.1.8.3.2.2 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory The status of the orange LED on the Light Tower. | ||||
| Slighttower2-GR | 1.3.6.1.4.1.20916.1.8.3.2.3 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory The status of the green LED on the Light Tower. | ||||
| Slighttower2-WH | 1.3.6.1.4.1.20916.1.8.3.2.4 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory The status of the white LED on the Light Tower. | ||||
| Slighttower2-BL | 1.3.6.1.4.1.20916.1.8.3.2.5 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory The status of the blue LED on the Light Tower. | ||||
| Slighttower2-A1 | 1.3.6.1.4.1.20916.1.8.3.2.6 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory The status of the 1st audio alarm on the Light Tower. | ||||
| Slighttower2-A2 | 1.3.6.1.4.1.20916.1.8.3.2.7 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory The status of the 2nd audio alarm on the Light Tower. | ||||
| Slighttower2-RL | 1.3.6.1.4.1.20916.1.8.3.2.8 | INTEGER (0..1) | RW | mandatory |
scalar · INTEGER (0..1) · read-write · mandatory The status of the LTA's on-board relay output | ||||
Traps / Notifications
- humidityalarm1-32E
1.3.6.1.4.1.20916.1.8.0.7 - humidityalarm2-32E
1.3.6.1.4.1.20916.1.8.0.9 - humidityalarm3-32E
1.3.6.1.4.1.20916.1.8.0.11 - humidityclear1-32E
1.3.6.1.4.1.20916.1.8.0.8 - humidityclear2-32E
1.3.6.1.4.1.20916.1.8.0.10 - humidityclear3-32E
1.3.6.1.4.1.20916.1.8.0.12 - room-alert-32E-snmp-trap
1.3.6.1.4.1.20916.1.8.0.2 - switchalarm1-32E
1.3.6.1.4.1.20916.1.8.0.13 - switchalarm2-32E
1.3.6.1.4.1.20916.1.8.0.15 - switchalarm3-32E
1.3.6.1.4.1.20916.1.8.0.17 - switchalarm4-32E
1.3.6.1.4.1.20916.1.8.0.19 - switchalarm5-32E
1.3.6.1.4.1.20916.1.8.0.21 - switchalarm6-32E
1.3.6.1.4.1.20916.1.8.0.23 - switchalarm7-32E
1.3.6.1.4.1.20916.1.8.0.25 - switchalarm8-32E
1.3.6.1.4.1.20916.1.8.0.27 - switchclear1-32E
1.3.6.1.4.1.20916.1.8.0.14 - switchclear2-32E
1.3.6.1.4.1.20916.1.8.0.16 - switchclear3-32E
1.3.6.1.4.1.20916.1.8.0.18 - switchclear4-32E
1.3.6.1.4.1.20916.1.8.0.20 - switchclear5-32E
1.3.6.1.4.1.20916.1.8.0.22 - switchclear6-32E
1.3.6.1.4.1.20916.1.8.0.24 - switchclear7-32E
1.3.6.1.4.1.20916.1.8.0.26 - switchclear8-32E
1.3.6.1.4.1.20916.1.8.0.28 - tempalarm1-32E
1.3.6.1.4.1.20916.1.8.0.1 - tempalarm2-32E
1.3.6.1.4.1.20916.1.8.0.3 - tempalarm3-32E
1.3.6.1.4.1.20916.1.8.0.5 - tempclear2-32E
1.3.6.1.4.1.20916.1.8.0.4 - tempclear3-32E
1.3.6.1.4.1.20916.1.8.0.6