PM-MIB
Avocent CorporationThis module defines the Avocent MIB extensions to PM-PDU products.
snmptranslate -m PM-MIB -Tpsnmpwalk -v2c -c <community> -m PM-MIB <host> 1.3.6.1.4.1.10418.17Imports
| IF-MIB | InterfaceIndex, InterfaceIndexOrZero |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Ipm | 1.3.6.1.4.1.10418.17 | |||
identity This module defines the Avocent MIB extensions to PM-PDU products. | ||||
| NpmProducts | 1.3.6.1.4.1.10418.17.1 | |||
| Npm1024 | 1.3.6.1.4.1.10418.17.1.1 | |||
| Npm2003 | 1.3.6.1.4.1.10418.17.1.2 | |||
| Npm2006 | 1.3.6.1.4.1.10418.17.1.3 | |||
| Npm2024 | 1.3.6.1.4.1.10418.17.1.4 | |||
| Npm3003 | 1.3.6.1.4.1.10418.17.1.5 | |||
| Npm3006 | 1.3.6.1.4.1.10418.17.1.6 | |||
| Npm3024 | 1.3.6.1.4.1.10418.17.1.7 | |||
| Npm1010 | 1.3.6.1.4.1.10418.17.1.8 | |||
| Npm2010 | 1.3.6.1.4.1.10418.17.1.9 | |||
| Npm3010 | 1.3.6.1.4.1.10418.17.1.10 | |||
| Npm1020 | 1.3.6.1.4.1.10418.17.1.11 | |||
| Npm2020 | 1.3.6.1.4.1.10418.17.1.12 | |||
| Npm3020 | 1.3.6.1.4.1.10418.17.1.13 | |||
| NpmManagement | 1.3.6.1.4.1.10418.17.2 | |||
| NpmAppliance | 1.3.6.1.4.1.10418.17.2.1 | |||
| SpmHostName | 1.3.6.1.4.1.10418.17.2.1.1 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current The appliance name | ||||
| SpmProductModel | 1.3.6.1.4.1.10418.17.2.1.2 | DisplayString (SIZE (0..50)) | RO | |
scalar · DisplayString (SIZE (0..50)) · read-only · current The appliance product model | ||||
| SpmPartNumber | 1.3.6.1.4.1.10418.17.2.1.3 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current The part number of this appliance as shown on the label attached or imprinted on the appliance. | ||||
| SpmSerialNumber | 1.3.6.1.4.1.10418.17.2.1.4 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current The serial number of this appliance as shown on the label attached or imprinted on the appliance. | ||||
| SpmEIDNumber | 1.3.6.1.4.1.10418.17.2.1.5 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current The electronic ID number (EID) of this appliance as shown on the label attached or imprinted on the appliance. | ||||
| SpmBootcodeVersion | 1.3.6.1.4.1.10418.17.2.1.6 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current The version of the bootcode of this appliance. | ||||
| SpmFirmwareVersion | 1.3.6.1.4.1.10418.17.2.1.7 | DisplayString (SIZE (0..32)) | RO | |
scalar · DisplayString (SIZE (0..32)) · read-only · current The version of the firmware of this appliance. | ||||
| SpmReboot | 1.3.6.1.4.1.10418.17.2.1.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current A set value of reboot(2) will reboot the appliance. noAction(1) = always returned in a GET. Does nothing if SET. reboot(2) = when SET the appliance immediately reboots.
| ||||
| NpmSessions | 1.3.6.1.4.1.10418.17.2.2 | |||
| SpmActiveSessionsNumberOfSession | 1.3.6.1.4.1.10418.17.2.2.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current Number of active sessions. | ||||
| TpmActiveSessionsTable | 1.3.6.1.4.1.10418.17.2.2.2 | NA | ||
table · not-accessible · current This table contains the list of active sessions. | ||||
| RpmActiveSessionsTableEntry | 1.3.6.1.4.1.10418.17.2.2.2.1 | NA | ||
row · not-accessible · current each entry has the information about the active session | ||||
| CpmActiveSessionsTableIndex | 1.3.6.1.4.1.10418.17.2.2.2.1.1 | InterfaceIndexOrZero | RO | |
column · InterfaceIndexOrZero · read-only · current A unique index representing an entry in this table. | ||||
| CpmActiveSessionsTableUser | 1.3.6.1.4.1.10418.17.2.2.2.1.2 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current The name of the user that opens this session. | ||||
| CpmActiveSessionsTableGroup | 1.3.6.1.4.1.10418.17.2.2.2.1.3 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current The name of the group that the user belongs to. | ||||
| CpmActiveSessionsTableType | 1.3.6.1.4.1.10418.17.2.2.2.1.4 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current The session type. | ||||
| CpmActiveSessionsTableConnection | 1.3.6.1.4.1.10418.17.2.2.2.1.5 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current Connection type. | ||||
| CpmActiveSessionsTableSessionTime | 1.3.6.1.4.1.10418.17.2.2.2.1.6 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current Time of the session | ||||
| CpmActiveSessionsTableFrom | 1.3.6.1.4.1.10418.17.2.2.2.1.7 | DisplayString (SIZE (0..32)) | RO | |
column · DisplayString (SIZE (0..32)) · read-only · current The source IP address of the session. | ||||
| CpmActiveSessionsTableKill | 1.3.6.1.4.1.10418.17.2.2.2.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current A set value of killSession(2) will kill the session. noAction(1) = always returned in a GET. Does nothing if SET. killSession(2)= when SET the appliance immediately kills the session.
| ||||
| NpmPowerMgmt | 1.3.6.1.4.1.10418.17.2.5 | |||
| SpmPowerMgmtNumSerialPorts | 1.3.6.1.4.1.10418.17.2.5.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current The number of Serial Ports that has PDU connected on the appliance. | ||||
| TpmPowerMgmtSerialTable | 1.3.6.1.4.1.10418.17.2.5.2 | NA | ||
table · not-accessible · current Information about each serial port thas has PDU connect. | ||||
| RpmPowerMgmtSerialTableEntry | 1.3.6.1.4.1.10418.17.2.5.2.1 | NA | ||
row · not-accessible · current Information about each serial port thas has PDU connect. | ||||
| CpmPowerMgmtSerialTableIndex | 1.3.6.1.4.1.10418.17.2.5.2.1.1 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current The index of the register. | ||||
| CpmPowerMgmtSerialTablePortNumber | 1.3.6.1.4.1.10418.17.2.5.2.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current The number of the serial port when the PDU is connected. | ||||
| CpmPowerMgmtSerialTableDeviceName | 1.3.6.1.4.1.10418.17.2.5.2.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current The device name of this serial port. | ||||
| CpmPowerMgmtSerialTableNumberPDUs | 1.3.6.1.4.1.10418.17.2.5.2.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current Total number of units connected in this serial port. | ||||
| CpmPowerMgmtSerialTableBuzzer | 1.3.6.1.4.1.10418.17.2.5.2.1.10 | Integer32 | RW | |
column · Integer32 · read-write · current set/get buzzer(s) on or off for the chain. Returns 0 if not supported. | ||||
| CpmPowerMgmtSerialTableSyslog | 1.3.6.1.4.1.10418.17.2.5.2.1.11 | Integer32 | RW | |
column · Integer32 · read-write · current set/get syslog on or off for the chain. Returns 0 if not supported. | ||||
| CpmPowerMgmtSerialTableOverCurrent | 1.3.6.1.4.1.10418.17.2.5.2.1.12 | Integer32 | RW | |
column · Integer32 · read-write · current set/get over current proctection on or off for the chain. Returns 0 if not supported. | ||||
| CpmPowerMgmtSerialTableCycleInterval | 1.3.6.1.4.1.10418.17.2.5.2.1.13 | Integer32 | RW | |
column · Integer32 · read-write · current set/get cycle interval for the chain in whole seconds. Returns 0 if not supported. | ||||
| CpmPowerMgmtSerialTablePollRate | 1.3.6.1.4.1.10418.17.2.5.2.1.14 | Integer32 | RW | |
column · Integer32 · read-write · current set/get the poll rate for the chain in whole seconds. Returns 0 if not supported. | ||||
| CpmPowerMgmtSerialTablePassWord | 1.3.6.1.4.1.10418.17.2.5.2.1.15 | DisplayString | RW | |
column · DisplayString · read-write · current set the global password for admin user | ||||
| CpmPowerMgmtSerialTableSave | 1.3.6.1.4.1.10418.17.2.5.2.1.20 | INTEGER | RW | |
column · INTEGER · read-write · current noAction(1) = always returned in a GET. Does nothing if SET. save(2) = when SET the save command is sent to PDU.
| ||||
| CpmPowerMgmtSerialTableRestore | 1.3.6.1.4.1.10418.17.2.5.2.1.21 | INTEGER | RW | |
column · INTEGER · read-write · current noAction(1) = always returned in a GET. Does nothing if SET. restore(2) = when SET the restore command is sent to PDU.
| ||||
| TpmPowerMgmtPDUTable | 1.3.6.1.4.1.10418.17.2.5.3 | NA | ||
table · not-accessible · current This table contains the list of detected PDUs. | ||||
| RpmPowerMgmtPDUTableEntry | 1.3.6.1.4.1.10418.17.2.5.3.1 | NA | ||
row · not-accessible · current each entry has the information about the PDU. | ||||
| CpmPowerMgmtPDUTablePortNumber | 1.3.6.1.4.1.10418.17.2.5.3.1.1 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current Number of serial port when the PDU is connected. | ||||
| CpmPowerMgmtPDUTablePduIndex | 1.3.6.1.4.1.10418.17.2.5.3.1.2 | InterfaceIndexOrZero | RO | |
column · InterfaceIndexOrZero · read-only · current A PDU position in the chain. | ||||
| CpmPowerMgmtPDUTablePduId | 1.3.6.1.4.1.10418.17.2.5.3.1.3 | DisplayString | RW | |
column · DisplayString · read-write · current PDU identification. | ||||
| CpmPowerMgmtPDUTablePortName | 1.3.6.1.4.1.10418.17.2.5.3.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current Name of serial port when the PDU is connected. | ||||
| CpmPowerMgmtPDUTableModel | 1.3.6.1.4.1.10418.17.2.5.3.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current Model of the PDU. Returns N/A if not applicable. | ||||
| CpmPowerMgmtPDUTableVendor | 1.3.6.1.4.1.10418.17.2.5.3.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current Vendor of the PDU. Returns N/A if not applicable. | ||||
| CpmPowerMgmtPDUTableFirmwareVersion | 1.3.6.1.4.1.10418.17.2.5.3.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current Version of the PDU firmware. Returns N/A if not applicable. | ||||
| CpmPowerMgmtPDUTableNumberOfOutlets | 1.3.6.1.4.1.10418.17.2.5.3.1.8 | Integer32 | RO | |
column · Integer32 · read-only · current Number of outlets of the PDU. | ||||
| CpmPowerMgmtPDUTableCurrentNOS | 1.3.6.1.4.1.10418.17.2.5.3.1.9 | Integer32 | RO | obsolete |
column · Integer32 · read-only · obsolete Number of current sensors in the PDU. | ||||
| CpmPowerMgmtPDUTableCurrent1Value | 1.3.6.1.4.1.10418.17.2.5.3.1.10 | Integer32 | RO | obsolete |
column · Integer32 · read-only · obsolete Current of the sensor 1 in this PDU unit in AMP. The value of this object is the actual current in AMP * 10. You need to translate the readed value (Ex. : value is 5, the current is 0.5 AMP.). This OID is obsoleted. The value can be retrieved from pmPowerMgmtPDUTableCurrentValue, pmPowerMgmtPhasesTableCurrentValue, or pmPowerMgmtOutletsTableCurrentValue | ||||
| CpmPowerMgmtPDUTableCurrent1Max | 1.3.6.1.4.1.10418.17.2.5.3.1.11 | Integer32 | RW | obsolete |
column · Integer32 · read-write · obsolete Maximum current of the sensor 1 in this PDU unit in AMP. When the PDU does not have support for maximum value, the value will be 0. The value of this object is the actual current in AMP * 10. You need to translate the readed value (Ex. : value is 5, the current is 0.5 AMP.) Clear this value, set it with Zero value. This OID is obsoleted. The value can be retrieved from pmPowerMgmtPDUTableCurrentMax, pmPowerMgmtPhasesTableCurrentMax, or pmPowerMgmtOutletsTableCurrentMax | ||||
| CpmPowerMgmtPDUTableCurrent2Value | 1.3.6.1.4.1.10418.17.2.5.3.1.12 | Integer32 | RO | obsolete |
column · Integer32 · read-only · obsolete Current of the sensor 2 in this PDU unit in AMP. The value of this object is the actual current in AMP * 10. You need to translate the readed value (Ex. : value is 5, the current is 0.5 AMP.). This OID is obsoleted. The value can be retrieved from pmPowerMgmtPDUTableCurrentValue, pmPowerMgmtPhasesTableCurrentValue, or pmPowerMgmtOutletsTableCurrentValue | ||||
| CpmPowerMgmtPDUTableCurrent2Max | 1.3.6.1.4.1.10418.17.2.5.3.1.13 | Integer32 | RW | obsolete |
column · Integer32 · read-write · obsolete Maximum current of the sensor 2 in this PDU unit in AMP. When the PDU does not have support for maximum value, the value will be 0. The value of this object is the actual current in AMP * 10. You need to translate the readed value (Ex. : value is 5, the current is 0.5 AMP.) Clear this value, set it with Zero value. This OID is obsoleted. The value can be retrieved from pmPowerMgmtPDUTableCurrentMax, pmPowerMgmtPhasesTableCurrentMax, or pmPowerMgmtOutletsTableCurrentMax | ||||
| CpmPowerMgmtPDUTableCurrent3Value | 1.3.6.1.4.1.10418.17.2.5.3.1.14 | Integer32 | RO | obsolete |
column · Integer32 · read-only · obsolete Current of the sensor 3 in this PDU unit in AMP. The value of this object is the actual current in AMP * 10. You need to translate the readed value (Ex. : value is 5, the current is 0.5 AMP.) This OID is obsoleted. The value can be retrieved from pmPowerMgmtPDUTableCurrentValue, pmPowerMgmtPhasesTableCurrentValue, or pmPowerMgmtOutletsTableCurrentValue | ||||
| CpmPowerMgmtPDUTableCurrent3Max | 1.3.6.1.4.1.10418.17.2.5.3.1.15 | Integer32 | RW | obsolete |
column · Integer32 · read-write · obsolete Maximum current of the sensor 3 in this PDU unit in AMP. When the PDU does not have support for maximum value, the value will be 0. The value of this object is the actual current in AMP * 10. You need to translate the readed value (Ex. : value is 5, the current is 0.5 AMP.) Clear this value, set it with Zero value. This OID is obsoleted. The value can be retrieved from pmPowerMgmtPDUTableCurrentMax, pmPowerMgmtPhasesTableCurrentMax, or pmPowerMgmtOutletsTableCurrentMax | ||||
| CpmPowerMgmtPDUTableTemperatureNOS | 1.3.6.1.4.1.10418.17.2.5.3.1.16 | Integer32 | RO | obsolete |
column · Integer32 · read-only · obsolete Number of temperature sensors in the PDU. | ||||
| CpmPowerMgmtPDUTableTemperature1Value | 1.3.6.1.4.1.10418.17.2.5.3.1.17 | Integer32 | RO | obsolete |
column · Integer32 · read-only · obsolete Temperature of this PM unit in Celsius degrees. The value of this object is the actual temperature in degrees C * 10. You need to translate the readed value (Ex. : value is 240, the temperature is 24 Celsius.) If the temperature measurement is not installed this value will be 0. Valid values are 5 to 999 ( 0.5 to 99.9 Celsius). | ||||
| CpmPowerMgmtPDUTableTemperature1Max | 1.3.6.1.4.1.10418.17.2.5.3.1.18 | Integer32 | RW | obsolete |
column · Integer32 · read-write · obsolete Maximum temperature detected in this PM unit in Celsius degrees. The value will be Zero when the PDU does not have support for maximum value. The value of this object is the actual temperature in degrees C * 10. You need to translate the readed value (Ex. : value is 240, the temperature is 24 Celsius.) If the temperature measurement is not installed this value will be 0. Valid values are 5 to 999 ( 0.5 to 99.9 Celsius). Set with Zero value to clear the max. temperature. | ||||
| CpmPowerMgmtPDUTableTemperature2Value | 1.3.6.1.4.1.10418.17.2.5.3.1.19 | Integer32 | RO | obsolete |
column · Integer32 · read-only · obsolete Temperature of this PM unit in Celsius degrees. The value of this object is the actual temperature in degrees C * 10. You need to translate the readed value (Ex. : value is 240, the temperature is 24 Celsius.) If the temperature measurement is not installed this value will be 0. Valid values are 5 to 999 ( 0.5 to 99.9 Celsius). | ||||
| CpmPowerMgmtPDUTableTemperature2Max | 1.3.6.1.4.1.10418.17.2.5.3.1.20 | Integer32 | RW | obsolete |
column · Integer32 · read-write · obsolete Maximum temperature detected in this PM unit in Celsius degrees. The value will be Zero when the PDU does not have support for maximum value. The value of this object is the actual temperature in degrees C * 10. You need to translate the readed value (Ex. : value is 240, the temperature is 24 Celsius.) If the temperature measurement is not installed this value will be 0. Valid values are 5 to 999 ( 0.5 to 99.9 Celsius). Set with Zero value to clear the max. temperature. | ||||
| CpmPowerMgmtPDUTableTemperature3Value | 1.3.6.1.4.1.10418.17.2.5.3.1.21 | Integer32 | RO | obsolete |
column · Integer32 · read-only · obsolete Temperature of this PM unit in Celsius degrees. The value of this object is the actual temperature in degrees C * 10. You need to translate the readed value (Ex. : value is 240, the temperature is 24 Celsius.) If the temperature measurement is not installed this value will be 0. Valid values are 5 to 999 ( 0.5 to 99.9 Celsius). | ||||
| CpmPowerMgmtPDUTableTemperature3Max | 1.3.6.1.4.1.10418.17.2.5.3.1.22 | Integer32 | RW | obsolete |
column · Integer32 · read-write · obsolete Maximum temperature detected in this PM unit in Celsius degrees. The value will be Zero when the PDU does not have support for maximum value. The value of this object is the actual temperature in degrees C * 10. You need to translate the readed value (Ex. : value is 240, the temperature is 24 Celsius.) If the temperature measurement is not installed this value will be 0. Valid values are 5 to 999 ( 0.5 to 99.9 Celsius). Set with Zero value to clear the max. temperature. | ||||
| CpmPowerMgmtPDUTableHumidityNOS | 1.3.6.1.4.1.10418.17.2.5.3.1.23 | Integer32 | RO | obsolete |
column · Integer32 · read-only · obsolete Number of humidity sensors in the PDU. | ||||
| CpmPowerMgmtPDUTableHumidity1Value | 1.3.6.1.4.1.10418.17.2.5.3.1.24 | Integer32 | RO | obsolete |
column · Integer32 · read-only · obsolete Humidity of this PM unit . If the humidity measurement is not installed this value will be 0. | ||||
| CpmPowerMgmtPDUTableHumidity1Max | 1.3.6.1.4.1.10418.17.2.5.3.1.25 | Integer32 | RW | obsolete |
column · Integer32 · read-write · obsolete Maximum humidity detected in this PM unit. If the humidity measurement is not installed or the PDU does not have support for maximum value this value will be 0. Set with Zero value to clear the max. temperature. | ||||
| CpmPowerMgmtPDUTableHumidity2Value | 1.3.6.1.4.1.10418.17.2.5.3.1.26 | Integer32 | RO | obsolete |
column · Integer32 · read-only · obsolete Humidity of this PM unit . If the humidity measurement is not installed this value will be 0. | ||||
| CpmPowerMgmtPDUTableHumidity2Max | 1.3.6.1.4.1.10418.17.2.5.3.1.27 | Integer32 | RW | obsolete |
column · Integer32 · read-write · obsolete Maximum humidity detected in this PM unit. If the humidity measurement is not installed or the PDU does not have support for maximum value this value will be 0. Set with Zero value to clear the max. temperature. | ||||
| CpmPowerMgmtPDUTableHumidity3Value | 1.3.6.1.4.1.10418.17.2.5.3.1.28 | Integer32 | RO | obsolete |
column · Integer32 · read-only · obsolete Humidity of this PM unit . If the humidity measurement is not installed this value will be 0. | ||||
| CpmPowerMgmtPDUTableHumidity3Max | 1.3.6.1.4.1.10418.17.2.5.3.1.29 | Integer32 | RW | obsolete |
column · Integer32 · read-write · obsolete Maximum humidity detected in this PM unit. If the humidity measurement is not installed or the PDU does not have support for maximum value this value will be 0. Set with Zero value to clear the max. temperature. | ||||
| CpmPowerMgmtPDUTableVoltageNOS | 1.3.6.1.4.1.10418.17.2.5.3.1.30 | Integer32 | RO | obsolete |
column · Integer32 · read-only · obsolete Number of voltage sensors in the PDU. | ||||
| CpmPowerMgmtPDUTableVoltage1Value | 1.3.6.1.4.1.10418.17.2.5.3.1.31 | Integer32 | RO | obsolete |
column · Integer32 · read-only · obsolete Voltage of this sensor in this PDU unit. This OID is obsoleted. The value can be retrieved from pmPowerMgmtPDUTableVoltageValue, pmPowerMgmtPhasesTableVoltageValue, or pmPowerMgmtOutletsTableVoltageValue | ||||
| CpmPowerMgmtPDUTableVoltage1Max | 1.3.6.1.4.1.10418.17.2.5.3.1.32 | Integer32 | RW | obsolete |
column · Integer32 · read-write · obsolete Maximum voltage of this sensor in this PDU unit. Set with Zero value to clear the maximum voltage. This OID is obsoleted. The value can be retrieved from pmPowerMgmtPDUTableVoltageMax, pmPowerMgmtPhasesTableVoltageMax, or pmPowerMgmtOutletsTableVoltageMax | ||||
| CpmPowerMgmtPDUTableVoltage2Value | 1.3.6.1.4.1.10418.17.2.5.3.1.33 | Integer32 | RO | obsolete |
column · Integer32 · read-only · obsolete Voltage of this sensor in this PDU unit. This OID is obsoleted. The value can be retrieved from pmPowerMgmtPDUTableVoltageValue, pmPowerMgmtPhasesTableVoltageValue, or pmPowerMgmtOutletsTableVoltageValue | ||||
| CpmPowerMgmtPDUTableVoltage2Max | 1.3.6.1.4.1.10418.17.2.5.3.1.34 | Integer32 | RW | obsolete |
column · Integer32 · read-write · obsolete Maximum voltage of this sensor in this PDU unit. Set with Zero value to clear the maximum voltage. This OID is obsoleted. The value can be retrieved from pmPowerMgmtPDUTableVoltageMax, pmPowerMgmtPhasesTableVoltageMax, or pmPowerMgmtOutletsTableVoltageMax | ||||
| CpmPowerMgmtPDUTableVoltage3Value | 1.3.6.1.4.1.10418.17.2.5.3.1.35 | Integer32 | RO | obsolete |
column · Integer32 · read-only · obsolete Voltage of this sensor in this PDU unit. This OID is obsoleted. The value can be retrieved from pmPowerMgmtPDUTableVoltageValue, pmPowerMgmtPhasesTableVoltageValue, or pmPowerMgmtOutletsTableVoltageValue | ||||
| CpmPowerMgmtPDUTableVoltage3Max | 1.3.6.1.4.1.10418.17.2.5.3.1.36 | Integer32 | RW | obsolete |
column · Integer32 · read-write · obsolete Maximum voltage of this sensor in this PDU unit. Set with Zero value to clear the maximum voltage. This OID is obsoleted. The value can be retrieved from pmPowerMgmtPDUTableVoltageMax, pmPowerMgmtPhasesTableVoltageMax, or pmPowerMgmtOutletsTableVoltageMax | ||||
| CpmPowerMgmtPDUTableNumberOfPhases | 1.3.6.1.4.1.10418.17.2.5.3.1.37 | Integer32 | RO | |
column · Integer32 · read-only · current Number of phases of the PDU. | ||||
| CpmPowerMgmtPDUTableNumberOfBanks | 1.3.6.1.4.1.10418.17.2.5.3.1.38 | Integer32 | RO | |
column · Integer32 · read-only · current Number of banks in the PDU. | ||||
| CpmPowerMgmtPDUTableNumberOfSensors | 1.3.6.1.4.1.10418.17.2.5.3.1.40 | Integer32 | RO | |
column · Integer32 · read-only · current Number of sensors in the PDU. | ||||
| CpmPowerMgmtPDUTableFactoryDefault | 1.3.6.1.4.1.10418.17.2.5.3.1.41 | INTEGER | RW | |
column · INTEGER · read-write · current A set value of 2 will set the PDU to factory default settings. noAction(1) = always returned in a GET. Does nothing if SET. reset(2) = when SET the factory default command is sent to the PDU.
| ||||
| CpmPowerMgmtPDUTableColdStartDelay | 1.3.6.1.4.1.10418.17.2.5.3.1.42 | Integer32 | RW | |
column · Integer32 · read-write · current PDUs cold start delay in whole seconds (0-60). Returns 0 if not supported. | ||||
| CpmPowerMgmtPDUTableReboot | 1.3.6.1.4.1.10418.17.2.5.3.1.43 | INTEGER | RW | |
column · INTEGER · read-write · current A set value of power*(2) will send command to PDU. noAction(1) = always returned in a GET. Does nothing if SET. reboot(2) = when SET the reboot command is sent to PDU.
| ||||
| CpmPowerMgmtPDUTableMaxCurrent | 1.3.6.1.4.1.10418.17.2.5.3.1.44 | Integer32 | RO | |
column · Integer32 · read-only · current Maximum value of current allowed in the PDU (A x 10). | ||||
| CpmPowerMgmtPDUTableAlarm | 1.3.6.1.4.1.10418.17.2.5.3.1.45 | INTEGER | RO | |
column · INTEGER · read-only · current Show the PDU alarm status. Returns 0 if not supported.
| ||||
| CpmPowerMgmtPDUTableCurrentValue | 1.3.6.1.4.1.10418.17.2.5.3.1.50 | Integer32 | RO | |
column · Integer32 · read-only · current Actual value of current in the PDU (A x 10). Returns 0 if not supported. | ||||
| CpmPowerMgmtPDUTableCurrentMax | 1.3.6.1.4.1.10418.17.2.5.3.1.51 | Integer32 | RO | |
column · Integer32 · read-only · current Maximum value of current in the PDU (A x 10). Returns 0 if not supported. | ||||
| CpmPowerMgmtPDUTableCurrentMin | 1.3.6.1.4.1.10418.17.2.5.3.1.52 | Integer32 | RO | |
column · Integer32 · read-only · current Minimum value of current in the PDU (A x 10). Returns 0 if not supported. | ||||
| CpmPowerMgmtPDUTableCurrentAvg | 1.3.6.1.4.1.10418.17.2.5.3.1.53 | Integer32 | RO | |
column · Integer32 · read-only · current Average value of current in the PDU (A x 10). Returns 0 if not supported. | ||||
| CpmPowerMgmtPDUTableCurrentReset | 1.3.6.1.4.1.10418.17.2.5.3.1.54 | INTEGER | RW | |
column · INTEGER · read-write · current noAction(1) = always returned in a GET. Does nothing if SET. reset(2) = when SET the reset command is sent to PDU.
| ||||
| CpmPowerMgmtPDUTablePowerValue | 1.3.6.1.4.1.10418.17.2.5.3.1.60 | Integer32 | RO | |
column · Integer32 · read-only · current Actual value of power in the PDU (W x 10). Returns 0 if not supported. | ||||
| CpmPowerMgmtPDUTablePowerMax | 1.3.6.1.4.1.10418.17.2.5.3.1.61 | Integer32 | RO | |
column · Integer32 · read-only · current Maximum value of power in the PDU (W x 10). Returns 0 if not supported. | ||||
| CpmPowerMgmtPDUTablePowerMin | 1.3.6.1.4.1.10418.17.2.5.3.1.62 | Integer32 | RO | |
column · Integer32 · read-only · current Minimum value of power in the PDU (W x 10). Returns 0 if not supported. | ||||
| CpmPowerMgmtPDUTablePowerAvg | 1.3.6.1.4.1.10418.17.2.5.3.1.63 | Integer32 | RO | |
column · Integer32 · read-only · current Average value of power in the PDU (W x 10). Returns 0 if not supported. | ||||
| CpmPowerMgmtPDUTablePowerReset | 1.3.6.1.4.1.10418.17.2.5.3.1.64 | INTEGER | RW | |
column · INTEGER · read-write · current noAction(1) = always returned in a GET. Does nothing if SET. reset(2) = when SET the reset command is sent to PDU.
| ||||
| CpmPowerMgmtPDUTablePowerType | 1.3.6.1.4.1.10418.17.2.5.3.1.65 | INTEGER | RO | |
column · INTEGER · read-only · current Type of power values. Returns 0 if not supported.
| ||||
| CpmPowerMgmtPDUTableVoltageValue | 1.3.6.1.4.1.10418.17.2.5.3.1.70 | Integer32 | RO | |
column · Integer32 · read-only · current Actual value of voltage in the PDU (V). Returns 0 if not supported. | ||||
| CpmPowerMgmtPDUTableVoltageMax | 1.3.6.1.4.1.10418.17.2.5.3.1.71 | Integer32 | RO | |
column · Integer32 · read-only · current Maximum value of voltage in the PDU (V). Returns 0 if not supported. | ||||
| CpmPowerMgmtPDUTableVoltageMin | 1.3.6.1.4.1.10418.17.2.5.3.1.72 | Integer32 | RO | |
column · Integer32 · read-only · current Minimum value of voltage in the PDU (V). Returns 0 if not supported. | ||||
| CpmPowerMgmtPDUTableVoltageAvg | 1.3.6.1.4.1.10418.17.2.5.3.1.73 | Integer32 | RO | |
column · Integer32 · read-only · current Average value of voltage in the PDU (V). Returns 0 if not supported. | ||||
| CpmPowerMgmtPDUTableVoltageReset | 1.3.6.1.4.1.10418.17.2.5.3.1.74 | INTEGER | RW | |
column · INTEGER · read-write · current noAction(1) = always returned in a GET. Does nothing if SET. reset(2) = when SET the reset command is sent to PDU.
| ||||
| CpmPowerMgmtPDUTableVoltageType | 1.3.6.1.4.1.10418.17.2.5.3.1.75 | INTEGER | RO | |
column · INTEGER · read-only · current Type of voltage values. Returns 0 if not supported.
| ||||
| CpmPowerMgmtPDUTablePowerFactorValue | 1.3.6.1.4.1.10418.17.2.5.3.1.80 | Integer32 | RO | |
column · Integer32 · read-only · current Actual value of power factor in the PDU (Pf x 100). Returns 0 if not supported. | ||||
| CpmPowerMgmtPDUTablePowerFactorMax | 1.3.6.1.4.1.10418.17.2.5.3.1.81 | Integer32 | RO | |
column · Integer32 · read-only · current Maximum value of power factor in the PDU (Pf x 100). Returns 0 if not supported. | ||||
| CpmPowerMgmtPDUTablePowerFactorMin | 1.3.6.1.4.1.10418.17.2.5.3.1.82 | Integer32 | RO | |
column · Integer32 · read-only · current Minimum value of power factor in the PDU (Pf x 100). Returns 0 if not supported. | ||||
| CpmPowerMgmtPDUTablePowerFactorAvg | 1.3.6.1.4.1.10418.17.2.5.3.1.83 | Integer32 | RO | |
column · Integer32 · read-only · current Average value of power factor in the PDU (Pf x 100). Returns 0 if not supported. | ||||
| CpmPowerMgmtPDUTablePowerFactorReset | 1.3.6.1.4.1.10418.17.2.5.3.1.84 | INTEGER | RW | |
column · INTEGER · read-write · current noAction(1) = always returned in a GET. Does nothing if SET. reset(2) = when SET the reset command is sent to PDU.
| ||||
| CpmPowerMgmtPDUTablePowerFactorType | 1.3.6.1.4.1.10418.17.2.5.3.1.85 | INTEGER | RO | |
column · INTEGER · read-only · current Type of power values. Returns 0 if not supported.
| ||||
| CpmPowerMgmtPDUTablePowerControl | 1.3.6.1.4.1.10418.17.2.5.3.1.90 | INTEGER | RW | |
column · INTEGER · read-write · current A set value of power*(2-4) will send command to PDU. noAction(1) = always returned in a GET. Does nothing if SET. powerOn(2) = when SET the power On command is sent to PDU. powerOff(3) = when SET the power Off command is sent to PDU. powerCycle(4)=when SET the power cycle command is sent to PDU. Returns 0 if not supported.
| ||||
| CpmPowerMgmtPDUTableResetOCP | 1.3.6.1.4.1.10418.17.2.5.3.1.91 | INTEGER | RW | |
column · INTEGER · read-write · current A set value of power*(2) will send command to PDU. noAction(1) = always returned in a GET. Does nothing if SET. reset(2) = when SET the reset command is sent to PDU. Returns 0 if not supported.
| ||||
| CpmPowerMgmtPDUTableCurrentHighCritical | 1.3.6.1.4.1.10418.17.2.5.3.1.100 | Integer32 | RW | |
column · Integer32 · read-write · current outlet high critical (alarm) current threshold (A x 10). Set fails if value is lower that CurrentHighWarning. Returns 0 if not supported. | ||||
| CpmPowerMgmtPDUTableCurrentHighWarning | 1.3.6.1.4.1.10418.17.2.5.3.1.101 | Integer32 | RW | |
column · Integer32 · read-write · current outlet high warning current threshold (A x 10). Set fails if value is higher than CurrentHighCritical or lower than CurrentLowWarning. Returns 0 if not supported. | ||||
| CpmPowerMgmtPDUTableCurrentLowWarning | 1.3.6.1.4.1.10418.17.2.5.3.1.102 | Integer32 | RW | |
column · Integer32 · read-write · current outlet low warning current threshold (A x 10). Set fails if value is higher than CurrentHighWarning or lower than CurrentLowCritical. Returns 0 if not supported. | ||||
| CpmPowerMgmtPDUTableCurrentLowCritical | 1.3.6.1.4.1.10418.17.2.5.3.1.103 | Integer32 | RW | |
column · Integer32 · read-write · current outlet low critical current threshold (A x 10). Set fails if value is higher than CurrentLowWarning. Returns 0 if not supported. | ||||
| CpmPowerMgmtPDUTableEnergyValue | 1.3.6.1.4.1.10418.17.2.5.3.1.105 | Integer32 | RO | |
column · Integer32 · read-only · current pdu energy value (Wh). Returns 0 if not supported. | ||||
| CpmPowerMgmtPDUTableEnergyStartTime | 1.3.6.1.4.1.10418.17.2.5.3.1.106 | DisplayString | RO | |
column · DisplayString · read-only · current time at which energy calculation commenced (ISO8601 format). Returns N/A if not applicable. | ||||
| CpmPowerMgmtPDUTableEnergyReset | 1.3.6.1.4.1.10418.17.2.5.3.1.107 | INTEGER | RW | |
column · INTEGER · read-write · current noAction(1) = always returned in a GET. Does nothing if SET. reset(2) = when SET the reset command is sent to PDU.
| ||||
| SpmPowerMgmtTotalNumberOfOutlets | 1.3.6.1.4.1.10418.17.2.5.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current Number of outlets managed by the appliance. | ||||
| TpmPowerMgmtOutletsTable | 1.3.6.1.4.1.10418.17.2.5.5 | NA | ||
table · not-accessible · current This table contains the information about outlets. | ||||
| RpmPowerMgmtOutletsTableEntry | 1.3.6.1.4.1.10418.17.2.5.5.1 | NA | ||
row · not-accessible · current each entry has the information about the outlet. | ||||
| CpmPowerMgmtOutletsTablePortNumber | 1.3.6.1.4.1.10418.17.2.5.5.1.1 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current Serial Port number. | ||||
| CpmPowerMgmtOutletsTablePduNumber | 1.3.6.1.4.1.10418.17.2.5.5.1.2 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current Index. | ||||
| CpmPowerMgmtOutletsTableNumber | 1.3.6.1.4.1.10418.17.2.5.5.1.3 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current Number of the outlet in the PDU. | ||||
| CpmPowerMgmtOutletsTableName | 1.3.6.1.4.1.10418.17.2.5.5.1.4 | DisplayString | RW | |
column · DisplayString · read-write · current Name of the outlet. | ||||
| CpmPowerMgmtOutletsTableStatus | 1.3.6.1.4.1.10418.17.2.5.5.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Status of the outlet. Returns 0 if not supported.
| ||||
| CpmPowerMgmtOutletsTablePowerControl | 1.3.6.1.4.1.10418.17.2.5.5.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current A set value of power*(2-6) will send command to PDU. noAction(1) = always returned in a GET. Does nothing if SET. powerOn(2) = when SET the power On command is sent to PDU. powerOff(3) = when SET the power Off command is sent to PDU. powerCycle(4)=when SET the power cycle command is sent to PDU. powerLock(5)= when SET the power lock command is sent to PDU. powerUnlock(6)=when SET the power unlock command is sent to PDU. The powerLock and powerUnlock are valid only for Cyclades-PM PDUs
| ||||
| CpmPowerMgmtOutletsTablePortName | 1.3.6.1.4.1.10418.17.2.5.5.1.7 | DisplayString | RO | |
column · DisplayString · read-only · current Serial Port Name where the PDU is connected. | ||||
| CpmPowerMgmtOutletsTablePduId | 1.3.6.1.4.1.10418.17.2.5.5.1.8 | DisplayString | RO | |
column · DisplayString · read-only · current PDU identification. | ||||
| CpmPowerMgmtOutletsTablePostOnDelay | 1.3.6.1.4.1.10418.17.2.5.5.1.9 | Integer32 | RW | |
column · Integer32 · read-write · current post on delay for the outlet (seconds x 10) Returns 0 if not supported. | ||||
| CpmPowerMgmtOutletsTablePostOffDelay | 1.3.6.1.4.1.10418.17.2.5.5.1.10 | Integer32 | RW | |
column · Integer32 · read-write · current post off delay for the outlet (seconds x 10) Returns 0 if not supported. | ||||
| CpmPowerMgmtOutletsTableAlarm | 1.3.6.1.4.1.10418.17.2.5.5.1.45 | INTEGER | RO | |
column · INTEGER · read-only · current Show the outlet alarm status. Returns 0 if not supported.
| ||||
| CpmPowerMgmtOutletsTableCurrentValue | 1.3.6.1.4.1.10418.17.2.5.5.1.50 | Integer32 | RO | |
column · Integer32 · read-only · current Actual value of current in the outlet (A x 10). Returns 0 if not supported. | ||||
| CpmPowerMgmtOutletsTableCurrentMax | 1.3.6.1.4.1.10418.17.2.5.5.1.51 | Integer32 | RO | |
column · Integer32 · read-only · current Maximum value of current in the outlet (A x 10). Returns 0 if not supported. | ||||
| CpmPowerMgmtOutletsTableCurrentMin | 1.3.6.1.4.1.10418.17.2.5.5.1.52 | Integer32 | RO | |
column · Integer32 · read-only · current Minimum value of current in the outlet (A x 10). Returns 0 if not supported. | ||||
| CpmPowerMgmtOutletsTableCurrentAvg | 1.3.6.1.4.1.10418.17.2.5.5.1.53 | Integer32 | RO | |
column · Integer32 · read-only · current Average value of current in the outlet (A x 10). Returns 0 if not supported. | ||||
| CpmPowerMgmtOutletsTableCurrentReset | 1.3.6.1.4.1.10418.17.2.5.5.1.54 | INTEGER | RW | |
column · INTEGER · read-write · current noAction(1) = always returned in a GET. Does nothing if SET. reset(2) = when SET the reset command is sent to PDU.
| ||||
| CpmPowerMgmtOutletsTablePowerValue | 1.3.6.1.4.1.10418.17.2.5.5.1.60 | Integer32 | RO | |
column · Integer32 · read-only · current Actual value of power in the outlet (W x 10). Returns 0 if not supported. | ||||
| CpmPowerMgmtOutletsTablePowerMax | 1.3.6.1.4.1.10418.17.2.5.5.1.61 | Integer32 | RO | |
column · Integer32 · read-only · current Maximum value of power in the outlet (W x 10). Returns 0 if not supported. | ||||
| CpmPowerMgmtOutletsTablePowerMin | 1.3.6.1.4.1.10418.17.2.5.5.1.62 | Integer32 | RO | |
column · Integer32 · read-only · current Minimum value of power in the outlet (W x 10). Returns 0 if not supported. | ||||
| CpmPowerMgmtOutletsTablePowerAvg | 1.3.6.1.4.1.10418.17.2.5.5.1.63 | Integer32 | RO | |
column · Integer32 · read-only · current Average value of power in the outlet (W x 10). Returns 0 if not supported. | ||||
| CpmPowerMgmtOutletsTablePowerReset | 1.3.6.1.4.1.10418.17.2.5.5.1.64 | INTEGER | RW | |
column · INTEGER · read-write · current noAction(1) = always returned in a GET. Does nothing if SET. reset(2) = when SET the reset command is sent to PDU.
| ||||
| CpmPowerMgmtOutletsTablePowerType | 1.3.6.1.4.1.10418.17.2.5.5.1.65 | INTEGER | RO | |
column · INTEGER · read-only · current Type of power values. Returns 0 if not supported.
| ||||
| CpmPowerMgmtOutletsTableVoltageValue | 1.3.6.1.4.1.10418.17.2.5.5.1.70 | Integer32 | RO | |
column · Integer32 · read-only · current Actual value of voltage in the outlet (V). Returns 0 if not supported. | ||||
| CpmPowerMgmtOutletsTableVoltageMax | 1.3.6.1.4.1.10418.17.2.5.5.1.71 | Integer32 | RO | |
column · Integer32 · read-only · current Maximum value of voltage in the outlet (V). Returns 0 if not supported. | ||||
| CpmPowerMgmtOutletsTableVoltageMin | 1.3.6.1.4.1.10418.17.2.5.5.1.72 | Integer32 | RO | |
column · Integer32 · read-only · current Minimum value of voltage in the outlet (V). Returns 0 if not supported. | ||||
| CpmPowerMgmtOutletsTableVoltageAvg | 1.3.6.1.4.1.10418.17.2.5.5.1.73 | Integer32 | RO | |
column · Integer32 · read-only · current Average value of voltage in the outlet (V). Returns 0 if not supported. | ||||
| CpmPowerMgmtOutletsTableVoltageReset | 1.3.6.1.4.1.10418.17.2.5.5.1.74 | INTEGER | RW | |
column · INTEGER · read-write · current noAction(1) = always returned in a GET. Does nothing if SET. reset(2) = when SET the reset command is sent to PDU.
| ||||
| CpmPowerMgmtOutletsTableVoltageType | 1.3.6.1.4.1.10418.17.2.5.5.1.75 | INTEGER | RO | |
column · INTEGER · read-only · current Type of voltage values. Returns 0 if not supported.
| ||||
| CpmPowerMgmtOutletsTablePowerFactorValue | 1.3.6.1.4.1.10418.17.2.5.5.1.80 | Integer32 | RO | |
column · Integer32 · read-only · current Actual value of power factor in the outlet (Pf x 100). Returns 0 if not supported. | ||||
| CpmPowerMgmtOutletsTablePowerFactorMax | 1.3.6.1.4.1.10418.17.2.5.5.1.81 | Integer32 | RO | |
column · Integer32 · read-only · current Maximum value of power factor in the outlet (Pf x 100). Returns 0 if not supported. | ||||
| CpmPowerMgmtOutletsTablePowerFactorMin | 1.3.6.1.4.1.10418.17.2.5.5.1.82 | Integer32 | RO | |
column · Integer32 · read-only · current Minimum value of power factor in the outlet (Pf x 100). Returns 0 if not supported. | ||||
| CpmPowerMgmtOutletsTablePowerFactorAvg | 1.3.6.1.4.1.10418.17.2.5.5.1.83 | Integer32 | RO | |
column · Integer32 · read-only · current Average value of power factor in the outlet (Pf x 100). Returns 0 if not supported. | ||||
| CpmPowerMgmtOutletsTablePowerFactorReset | 1.3.6.1.4.1.10418.17.2.5.5.1.84 | INTEGER | RW | |
column · INTEGER · read-write · current noAction(1) = always returned in a GET. Does nothing if SET. reset(2) = when SET the reset command is sent to PDU.
| ||||
| CpmPowerMgmtOutletsTablePowerFactorType | 1.3.6.1.4.1.10418.17.2.5.5.1.85 | INTEGER | RO | |
column · INTEGER · read-only · current Type of power factor values. Returns 0 if not supported.
| ||||
| CpmPowerMgmtOutletsTableCurrentHighCritical | 1.3.6.1.4.1.10418.17.2.5.5.1.100 | Integer32 | RW | |
column · Integer32 · read-write · current outlet high critical (alarm) current threshold (A x 10). Set fails if value is lower that CurrentHighWarning. Returns 0 if not supported. | ||||
| CpmPowerMgmtOutletsTableCurrentHighWarning | 1.3.6.1.4.1.10418.17.2.5.5.1.101 | Integer32 | RW | |
column · Integer32 · read-write · current outlet high warning current threshold (A x 10). Set fails if value is higher than CurrentHighCritical or lower than CurrentLowWarning. Returns 0 if not supported. | ||||
| CpmPowerMgmtOutletsTableCurrentLowWarning | 1.3.6.1.4.1.10418.17.2.5.5.1.102 | Integer32 | RW | |
column · Integer32 · read-write · current outlet low warning current threshold (A x 10). Set fails if value is higher than CurrentHighWarning or lower than CurrentLowCritical. Returns 0 if not supported. | ||||
| CpmPowerMgmtOutletsTableCurrentLowCritical | 1.3.6.1.4.1.10418.17.2.5.5.1.103 | Integer32 | RW | |
column · Integer32 · read-write · current outlet low critical current threshold (A x 10). Set fails if value is higher than CurrentLowWarning. Returns 0 if not supported. | ||||
| CpmPowerMgmtOutletsTableEnergyValue | 1.3.6.1.4.1.10418.17.2.5.5.1.105 | Integer32 | RO | |
column · Integer32 · read-only · current outlet energy value (Wh). Returns 0 if not supported. | ||||
| CpmPowerMgmtOutletsTableEnergyStartTime | 1.3.6.1.4.1.10418.17.2.5.5.1.106 | DisplayString | RO | |
column · DisplayString · read-only · current time at which energy calculation commenced (ISO8601 format). Returns N/A if not applicable. | ||||
| CpmPowerMgmtOutletsTableEnergyReset | 1.3.6.1.4.1.10418.17.2.5.5.1.107 | INTEGER | RW | |
column · INTEGER · read-write · current noAction(1) = always returned in a GET. Does nothing if SET. reset(2) = when SET the reset command is sent to PDU.
| ||||
| SpmPowerMgmtNumberOfOutletGroup | 1.3.6.1.4.1.10418.17.2.5.6 | Integer32 | RO | |
scalar · Integer32 · read-only · current Number of configured group of outlets. | ||||
| TpmPowerMgmtGroupTable | 1.3.6.1.4.1.10418.17.2.5.7 | NA | ||
table · not-accessible · current This table contains the information about group of outlets. | ||||
| RpmPowerMgmtGroupTableEntry | 1.3.6.1.4.1.10418.17.2.5.7.1 | NA | ||
row · not-accessible · current each entry has the information about group of outlets. | ||||
| CpmPowerMgmtGroupTableIndex | 1.3.6.1.4.1.10418.17.2.5.7.1.1 | InterfaceIndexOrZero | RO | |
column · InterfaceIndexOrZero · read-only · current Index of the group. | ||||
| CpmPowerMgmtGroupTableName | 1.3.6.1.4.1.10418.17.2.5.7.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current Name of the group of outlets. | ||||
| CpmPowerMgmtGroupTableStatus | 1.3.6.1.4.1.10418.17.2.5.7.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Status of the group of outlet.
| ||||
| CpmPowerMgmtGroupTablePowerControl | 1.3.6.1.4.1.10418.17.2.5.7.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current A set value of power*(2-4) will send command to PDU. noAction(1) = always returned in a GET. Does nothing if SET. powerOn(2) = when SET the power On command is sent to PDU. powerOff(3) = when SET the power Off command is sent to PDU. powerCycle(4)=when SET the power cycle command is sent to PDU.
| ||||
| SpmPowerMgmtTotalNumberOfPhases | 1.3.6.1.4.1.10418.17.2.5.8 | Integer32 | RO | |
scalar · Integer32 · read-only · current Number of phases managed by the appliance. | ||||
| TpmPowerMgmtPhasesTable | 1.3.6.1.4.1.10418.17.2.5.9 | NA | ||
table · not-accessible · current This table contains the information about phases. | ||||
| RpmPowerMgmtPhasesTableEntry | 1.3.6.1.4.1.10418.17.2.5.9.1 | NA | ||
row · not-accessible · current each entry has the information about the phases. | ||||
| CpmPowerMgmtPhasesTablePortNumber | 1.3.6.1.4.1.10418.17.2.5.9.1.1 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current Serial Port number. | ||||
| CpmPowerMgmtPhasesTablePduNumber | 1.3.6.1.4.1.10418.17.2.5.9.1.2 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current Index. | ||||
| CpmPowerMgmtPhasesTableNumber | 1.3.6.1.4.1.10418.17.2.5.9.1.3 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current Number of the phase in the PDU. | ||||
| CpmPowerMgmtPhasesTableName | 1.3.6.1.4.1.10418.17.2.5.9.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current Name of the phase. Returns N/A if not applicable. | ||||
| CpmPowerMgmtPhasesTablePortName | 1.3.6.1.4.1.10418.17.2.5.9.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current Serial Port Name where the PDU is connected. | ||||
| CpmPowerMgmtPhasesTablePduId | 1.3.6.1.4.1.10418.17.2.5.9.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current PDU identification. | ||||
| CpmPowerMgmtPhasesTableAlarm | 1.3.6.1.4.1.10418.17.2.5.9.1.45 | INTEGER | RO | |
column · INTEGER · read-only · current Show the phase alarm status. Returns 0 if not supported.
| ||||
| CpmPowerMgmtPhasesTableCurrentValue | 1.3.6.1.4.1.10418.17.2.5.9.1.50 | Integer32 | RO | |
column · Integer32 · read-only · current Actual value of current in the phase (A x 10). Returns 0 if not supported. | ||||
| CpmPowerMgmtPhasesTableCurrentMax | 1.3.6.1.4.1.10418.17.2.5.9.1.51 | Integer32 | RO | |
column · Integer32 · read-only · current Maximum value of current in the phase (A x 10). Returns 0 if not supported. | ||||
| CpmPowerMgmtPhasesTableCurrentMin | 1.3.6.1.4.1.10418.17.2.5.9.1.52 | Integer32 | RO | |
column · Integer32 · read-only · current Minimum value of current in the phase (A x 10). Returns 0 if not supported. | ||||
| CpmPowerMgmtPhasesTableCurrentAvg | 1.3.6.1.4.1.10418.17.2.5.9.1.53 | Integer32 | RO | |
column · Integer32 · read-only · current Average value of current in the phase (A x 10). Returns 0 if not supported. | ||||
| CpmPowerMgmtPhasesTableCurrentReset | 1.3.6.1.4.1.10418.17.2.5.9.1.54 | INTEGER | RW | |
column · INTEGER · read-write · current noAction(1) = always returned in a GET. Does nothing if SET. reset(2) = when SET the reset command is sent to PDU.
| ||||
| CpmPowerMgmtPhasesTablePowerValue | 1.3.6.1.4.1.10418.17.2.5.9.1.60 | Integer32 | RO | |
column · Integer32 · read-only · current Actual value of power in the phase (W x 10). Returns 0 if not supported. | ||||
| CpmPowerMgmtPhasesTablePowerMax | 1.3.6.1.4.1.10418.17.2.5.9.1.61 | Integer32 | RO | |
column · Integer32 · read-only · current Maximum value of power in the phase (W x 10). Returns 0 if not supported. | ||||
| CpmPowerMgmtPhasesTablePowerMin | 1.3.6.1.4.1.10418.17.2.5.9.1.62 | Integer32 | RO | |
column · Integer32 · read-only · current Minimum value of power in the phase (W x 10). Returns 0 if not supported. | ||||
| CpmPowerMgmtPhasesTablePowerAvg | 1.3.6.1.4.1.10418.17.2.5.9.1.63 | Integer32 | RO | |
column · Integer32 · read-only · current Average value of power in the phase (W x 10). Returns 0 if not supported. | ||||
| CpmPowerMgmtPhasesTablePowerReset | 1.3.6.1.4.1.10418.17.2.5.9.1.64 | INTEGER | RW | |
column · INTEGER · read-write · current noAction(1) = always returned in a GET. Does nothing if SET. reset(2) = when SET the reset command is sent to PDU.
| ||||
| CpmPowerMgmtPhasesTablePowerType | 1.3.6.1.4.1.10418.17.2.5.9.1.65 | INTEGER | RO | |
column · INTEGER · read-only · current Type of power values. Returns 0 if not supported.
| ||||
| CpmPowerMgmtPhasesTableVoltageValue | 1.3.6.1.4.1.10418.17.2.5.9.1.70 | Integer32 | RO | |
column · Integer32 · read-only · current Actual value of voltage in the phase (V). Returns 0 if not supported. | ||||
| CpmPowerMgmtPhasesTableVoltageMax | 1.3.6.1.4.1.10418.17.2.5.9.1.71 | Integer32 | RO | |
column · Integer32 · read-only · current Maximum value of voltage in the phase (V). Returns 0 if not supported. | ||||
| CpmPowerMgmtPhasesTableVoltageMin | 1.3.6.1.4.1.10418.17.2.5.9.1.72 | Integer32 | RO | |
column · Integer32 · read-only · current Minimum value of voltage in the phase (V). Returns 0 if not supported. | ||||
| CpmPowerMgmtPhasesTableVoltageAvg | 1.3.6.1.4.1.10418.17.2.5.9.1.73 | Integer32 | RO | |
column · Integer32 · read-only · current Average value of voltage in the phase (V). Returns 0 if not supported. | ||||
| CpmPowerMgmtPhasesTableVoltageReset | 1.3.6.1.4.1.10418.17.2.5.9.1.74 | INTEGER | RW | |
column · INTEGER · read-write · current noAction(1) = always returned in a GET. Does nothing if SET. reset(2) = when SET the reset command is sent to PDU.
| ||||
| CpmPowerMgmtPhasesTableVoltageType | 1.3.6.1.4.1.10418.17.2.5.9.1.75 | INTEGER | RO | |
column · INTEGER · read-only · current Type of voltage values. Returns 0 if not supported.
| ||||
| CpmPowerMgmtPhasesTablePowerFactorValue | 1.3.6.1.4.1.10418.17.2.5.9.1.80 | Integer32 | RO | |
column · Integer32 · read-only · current Actual value of power factor in the phase (Pf x 100). Returns 0 if not supported. | ||||
| CpmPowerMgmtPhasesTablePowerFactorMax | 1.3.6.1.4.1.10418.17.2.5.9.1.81 | Integer32 | RO | |
column · Integer32 · read-only · current Maximum value of power factor in the phase (Pf x 100). Returns 0 if not supported. | ||||
| CpmPowerMgmtPhasesTablePowerFactorMin | 1.3.6.1.4.1.10418.17.2.5.9.1.82 | Integer32 | RO | |
column · Integer32 · read-only · current Minimum value of power factor in the phase (Pf x 100). Returns 0 if not supported. | ||||
| CpmPowerMgmtPhasesTablePowerFactorAvg | 1.3.6.1.4.1.10418.17.2.5.9.1.83 | Integer32 | RO | |
column · Integer32 · read-only · current Average value of power factor in the phase (Pf x 100). Returns 0 if not supported. | ||||
| CpmPowerMgmtPhasesTablePowerFactorReset | 1.3.6.1.4.1.10418.17.2.5.9.1.84 | INTEGER | RW | |
column · INTEGER · read-write · current noAction(1) = always returned in a GET. Does nothing if SET. reset(2) = when SET the reset command is sent to PDU.
| ||||
| CpmPowerMgmtPhasesTablePowerFactorType | 1.3.6.1.4.1.10418.17.2.5.9.1.85 | INTEGER | RO | |
column · INTEGER · read-only · current Type of power factor values. Returns 0 if not supported.
| ||||
| CpmPowerMgmtPhasesTableCurrentHighCritical | 1.3.6.1.4.1.10418.17.2.5.9.1.100 | Integer32 | RW | |
column · Integer32 · read-write · current phase high critical (alarm) current threshold (A x 10). Set fails if value is lower that CurrentHighWarning. Returns 0 if not supported. | ||||
| CpmPowerMgmtPhasesTableCurrentHighWarning | 1.3.6.1.4.1.10418.17.2.5.9.1.101 | Integer32 | RW | |
column · Integer32 · read-write · current phase high warning current threshold (A x 10). Set fails if value is higher than CurrentHighCritical or lower than CurrentLowWarning. Returns 0 if not supported. | ||||
| CpmPowerMgmtPhasesTableCurrentLowWarning | 1.3.6.1.4.1.10418.17.2.5.9.1.102 | Integer32 | RW | |
column · Integer32 · read-write · current phase low warning current threshold (A x 10). Set fails if value is higher than CurrentHighWarning or lower than CurrentLowCritical. Returns 0 if not supported. | ||||
| CpmPowerMgmtPhasesTableCurrentLowCritical | 1.3.6.1.4.1.10418.17.2.5.9.1.103 | Integer32 | RW | |
column · Integer32 · read-write · current phase low critical current threshold (A x 10). Set fails if value is higher than CurrentLowWarning. Returns 0 if not supported. | ||||
| SpmPowerMgmtTotalNumberOfBanks | 1.3.6.1.4.1.10418.17.2.5.10 | Integer32 | RO | |
scalar · Integer32 · read-only · current Number of banks managed by the appliance. | ||||
| TpmPowerMgmtBanksTable | 1.3.6.1.4.1.10418.17.2.5.11 | NA | ||
table · not-accessible · current This table contains the information about banks. | ||||
| RpmPowerMgmtBanksTableEntry | 1.3.6.1.4.1.10418.17.2.5.11.1 | NA | ||
row · not-accessible · current each entry has the information about the banks. | ||||
| CpmPowerMgmtBanksTablePortNumber | 1.3.6.1.4.1.10418.17.2.5.11.1.1 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current Serial Port number. | ||||
| CpmPowerMgmtBanksTablePduNumber | 1.3.6.1.4.1.10418.17.2.5.11.1.2 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current Index. | ||||
| CpmPowerMgmtBanksTableNumber | 1.3.6.1.4.1.10418.17.2.5.11.1.3 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current Number of the bank in the PDU. | ||||
| CpmPowerMgmtBanksTableName | 1.3.6.1.4.1.10418.17.2.5.11.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current Name of the bank. | ||||
| CpmPowerMgmtBanksTablePortName | 1.3.6.1.4.1.10418.17.2.5.11.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current Serial Port Name where the PDU is connected. | ||||
| CpmPowerMgmtBanksTablePduId | 1.3.6.1.4.1.10418.17.2.5.11.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current PDU identification. | ||||
| CpmPowerMgmtBanksTableAlarm | 1.3.6.1.4.1.10418.17.2.5.11.1.45 | INTEGER | RO | |
column · INTEGER · read-only · current Show the bank alarm status. Returns 0 if not supported.
| ||||
| CpmPowerMgmtBanksTableCurrentValue | 1.3.6.1.4.1.10418.17.2.5.11.1.50 | Integer32 | RO | |
column · Integer32 · read-only · current Actual value of current in the bank (A x 10). Returns 0 if not supported. | ||||
| CpmPowerMgmtBanksTableCurrentMax | 1.3.6.1.4.1.10418.17.2.5.11.1.51 | Integer32 | RO | |
column · Integer32 · read-only · current Maximum value of current in the bank (A x 10). Returns 0 if not supported. | ||||
| CpmPowerMgmtBanksTableCurrentMin | 1.3.6.1.4.1.10418.17.2.5.11.1.52 | Integer32 | RO | |
column · Integer32 · read-only · current Minimum value of current in the bank (A x 10). Returns 0 if not supported. | ||||
| CpmPowerMgmtBanksTableCurrentAvg | 1.3.6.1.4.1.10418.17.2.5.11.1.53 | Integer32 | RO | |
column · Integer32 · read-only · current Average value of current in the bank (A x 10). Returns 0 if not supported. | ||||
| CpmPowerMgmtBanksTableCurrentReset | 1.3.6.1.4.1.10418.17.2.5.11.1.54 | INTEGER | RW | |
column · INTEGER · read-write · current noAction(1) = always returned in a GET. Does nothing if SET. reset(2) = when SET the reset command is sent to PDU.
| ||||
| CpmPowerMgmtBanksTablePowerValue | 1.3.6.1.4.1.10418.17.2.5.11.1.60 | Integer32 | RO | |
column · Integer32 · read-only · current Actual value of power in the bank (W x 10). Returns 0 if not supported. | ||||
| CpmPowerMgmtBanksTablePowerMax | 1.3.6.1.4.1.10418.17.2.5.11.1.61 | Integer32 | RO | |
column · Integer32 · read-only · current Maximum value of power in the bank (W x 10). Returns 0 if not supported. | ||||
| CpmPowerMgmtBanksTablePowerMin | 1.3.6.1.4.1.10418.17.2.5.11.1.62 | Integer32 | RO | |
column · Integer32 · read-only · current Minimum value of power in the bank (W x 10). Returns 0 if not supported. | ||||
| CpmPowerMgmtBanksTablePowerAvg | 1.3.6.1.4.1.10418.17.2.5.11.1.63 | Integer32 | RO | |
column · Integer32 · read-only · current Average value of power in the bank (W x 10). Returns 0 if not supported. | ||||
| CpmPowerMgmtBanksTablePowerReset | 1.3.6.1.4.1.10418.17.2.5.11.1.64 | INTEGER | RW | |
column · INTEGER · read-write · current noAction(1) = always returned in a GET. Does nothing if SET. reset(2) = when SET the reset command is sent to PDU.
| ||||
| CpmPowerMgmtBanksTablePowerType | 1.3.6.1.4.1.10418.17.2.5.11.1.65 | INTEGER | RO | |
column · INTEGER · read-only · current Type of power values. Returns 0 if not supported.
| ||||
| CpmPowerMgmtBanksTableVoltageValue | 1.3.6.1.4.1.10418.17.2.5.11.1.70 | Integer32 | RO | |
column · Integer32 · read-only · current Actual value of voltage in the bank (V). Returns 0 if not supported. | ||||
| CpmPowerMgmtBanksTableVoltageMax | 1.3.6.1.4.1.10418.17.2.5.11.1.71 | Integer32 | RO | |
column · Integer32 · read-only · current Maximum value of voltage in the bank (V). Returns 0 if not supported. | ||||
| CpmPowerMgmtBanksTableVoltageMin | 1.3.6.1.4.1.10418.17.2.5.11.1.72 | Integer32 | RO | |
column · Integer32 · read-only · current Minimum value of voltage in the bank (V). Returns 0 if not supported. | ||||
| CpmPowerMgmtBanksTableVoltageAvg | 1.3.6.1.4.1.10418.17.2.5.11.1.73 | Integer32 | RO | |
column · Integer32 · read-only · current Average value of voltage in the bank (V). Returns 0 if not supported. | ||||
| CpmPowerMgmtBanksTableVoltageReset | 1.3.6.1.4.1.10418.17.2.5.11.1.74 | INTEGER | RW | |
column · INTEGER · read-write · current noAction(1) = always returned in a GET. Does nothing if SET. reset(2) = when SET the reset command is sent to PDU.
| ||||
| CpmPowerMgmtBanksTableVoltageType | 1.3.6.1.4.1.10418.17.2.5.11.1.75 | INTEGER | RO | |
column · INTEGER · read-only · current Type of voltage values. Returns 0 if not supported.
| ||||
| CpmPowerMgmtBanksTablePowerFactorValue | 1.3.6.1.4.1.10418.17.2.5.11.1.80 | Integer32 | RO | |
column · Integer32 · read-only · current Actual value of power factor in the bank (Pf x 100). Returns 0 if not supported. | ||||
| CpmPowerMgmtBanksTablePowerFactorMax | 1.3.6.1.4.1.10418.17.2.5.11.1.81 | Integer32 | RO | |
column · Integer32 · read-only · current Maximum value of power factor in the bank (Pf x 100). Returns 0 if not supported. | ||||
| CpmPowerMgmtBanksTablePowerFactorMin | 1.3.6.1.4.1.10418.17.2.5.11.1.82 | Integer32 | RO | |
column · Integer32 · read-only · current Minimum value of power factor in the bank (Pf x 100). Returns 0 if not supported. | ||||
| CpmPowerMgmtBanksTablePowerFactorAvg | 1.3.6.1.4.1.10418.17.2.5.11.1.83 | Integer32 | RO | |
column · Integer32 · read-only · current Average value of power factor in the bank (Pf x 100). Returns 0 if not supported. | ||||
| CpmPowerMgmtBanksTablePowerFactorReset | 1.3.6.1.4.1.10418.17.2.5.11.1.84 | INTEGER | RW | |
column · INTEGER · read-write · current noAction(1) = always returned in a GET. Does nothing if SET. reset(2) = when SET the reset command is sent to PDU.
| ||||
| CpmPowerMgmtBanksTablePowerFactorType | 1.3.6.1.4.1.10418.17.2.5.11.1.85 | INTEGER | RO | |
column · INTEGER · read-only · current Type of power factor values. Returns 0 if not supported.
| ||||
| CpmPowerMgmtBanksTableCurrentHighCritical | 1.3.6.1.4.1.10418.17.2.5.11.1.100 | Integer32 | RW | |
column · Integer32 · read-write · current bank high critical (alarm) current threshold (A x 10). Set fails if value is lower that CurrentHighWarning. Returns 0 if not supported. | ||||
| CpmPowerMgmtBanksTableCurrentHighWarning | 1.3.6.1.4.1.10418.17.2.5.11.1.101 | Integer32 | RW | |
column · Integer32 · read-write · current bank high warning current threshold (A x 10). Set fails if value is higher than CurrentHighCritical or lower than CurrentLowWarning. Returns 0 if not supported. | ||||
| CpmPowerMgmtBanksTableCurrentLowWarning | 1.3.6.1.4.1.10418.17.2.5.11.1.102 | Integer32 | RW | |
column · Integer32 · read-write · current bank low warning current threshold (A x 10). Set fails if value is higher than CurrentHighWarning or lower than CurrentLowCritical. Returns 0 if not supported. | ||||
| CpmPowerMgmtBanksTableCurrentLowCritical | 1.3.6.1.4.1.10418.17.2.5.11.1.103 | Integer32 | RW | |
column · Integer32 · read-write · current bank low critical current threshold (A x 10). Set fails if value is higher than CurrentLowWarning. Returns 0 if not supported. | ||||
| CpmPowerMgmtBanksTableEnergyValue | 1.3.6.1.4.1.10418.17.2.5.11.1.105 | Integer32 | RO | |
column · Integer32 · read-only · current bank energy value (Wh). Returns 0 if not supported. | ||||
| CpmPowerMgmtBanksTableEnergyStartTime | 1.3.6.1.4.1.10418.17.2.5.11.1.106 | DisplayString | RO | |
column · DisplayString · read-only · current time at which energy calculation commenced (ISO8601 format). Returns N/A if not applicable. | ||||
| CpmPowerMgmtBanksTableEnergyReset | 1.3.6.1.4.1.10418.17.2.5.11.1.107 | INTEGER | RW | |
column · INTEGER · read-write · current noAction(1) = always returned in a GET. Does nothing if SET. reset(2) = when SET the reset command is sent to PDU.
| ||||
| SpmPowerMgmtTotalNumberOfSensors | 1.3.6.1.4.1.10418.17.2.5.12 | Integer32 | RO | |
scalar · Integer32 · read-only · current Number of Sensors managed by the appliance. | ||||
| TpmPowerMgmtSensorsTable | 1.3.6.1.4.1.10418.17.2.5.13 | NA | ||
table · not-accessible · current This table contains the information about sensors. | ||||
| RpmPowerMgmtSensorsTableEntry | 1.3.6.1.4.1.10418.17.2.5.13.1 | NA | ||
row · not-accessible · current each entry has the information about the sensors. | ||||
| CpmPowerMgmtSensorsTablePortNumber | 1.3.6.1.4.1.10418.17.2.5.13.1.1 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current Serial Port number. | ||||
| CpmPowerMgmtSensorsTablePduNumber | 1.3.6.1.4.1.10418.17.2.5.13.1.2 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current Index. | ||||
| CpmPowerMgmtSensorsTableNumber | 1.3.6.1.4.1.10418.17.2.5.13.1.3 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current Number of the sensor in the PDU. | ||||
| CpmPowerMgmtSensorsTableName | 1.3.6.1.4.1.10418.17.2.5.13.1.4 | DisplayString | RW | |
column · DisplayString · read-write · current Name of the sensor. | ||||
| CpmPowerMgmtSensorsTablePortName | 1.3.6.1.4.1.10418.17.2.5.13.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current Serial Port Name where the PDU is connected. | ||||
| CpmPowerMgmtSensorsTablePduId | 1.3.6.1.4.1.10418.17.2.5.13.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current PDU identification. | ||||
| CpmPowerMgmtSensorsTableType | 1.3.6.1.4.1.10418.17.2.5.13.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The type of environmental monitor. Returns 0 if not supported.
| ||||
| CpmPowerMgmtSensorsTableStatus | 1.3.6.1.4.1.10418.17.2.5.13.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current Status of digital sensors: Dry-Contact, Water level, Smoke sensor, Motion sensor. Returns 0 if not supported.
| ||||
| CpmPowerMgmtSensorsTableValue | 1.3.6.1.4.1.10418.17.2.5.13.1.20 | DisplayString | RO | |
column · DisplayString · read-only · current Actual value of the sensor. Returns N/A if not applicable. | ||||
| CpmPowerMgmtSensorsTableValueMax | 1.3.6.1.4.1.10418.17.2.5.13.1.21 | DisplayString | RO | |
column · DisplayString · read-only · current Maximum value of the sensor. Returns N/A if not applicable. | ||||
| CpmPowerMgmtSensorsTableValueMin | 1.3.6.1.4.1.10418.17.2.5.13.1.22 | DisplayString | RO | |
column · DisplayString · read-only · current Minimum value of the sensor. Returns N/A if not applicable. | ||||
| CpmPowerMgmtSensorsTableValueAvg | 1.3.6.1.4.1.10418.17.2.5.13.1.23 | DisplayString | RO | |
column · DisplayString · read-only · current Average value of the sensor. Returns N/A if not applicable. | ||||
| CpmPowerMgmtSensorsTableValueInt | 1.3.6.1.4.1.10418.17.2.5.13.1.25 | Integer32 | RO | |
column · Integer32 · read-only · current Actual value of the sensor. Returns 0 if not supported. | ||||
| CpmPowerMgmtSensorsTableValueMaxInt | 1.3.6.1.4.1.10418.17.2.5.13.1.26 | Integer32 | RO | |
column · Integer32 · read-only · current Maximum value of the sensor. Returns 0 if not supported. | ||||
| CpmPowerMgmtSensorsTableValueMinInt | 1.3.6.1.4.1.10418.17.2.5.13.1.27 | Integer32 | RO | |
column · Integer32 · read-only · current Minimum value of the sensor. Returns 0 if not supported. | ||||
| CpmPowerMgmtSensorsTableValueAvgInt | 1.3.6.1.4.1.10418.17.2.5.13.1.28 | Integer32 | RO | |
column · Integer32 · read-only · current Average value of the sensor. Returns 0 if not supported. | ||||
| CpmPowerMgmtSensorsTableValueReset | 1.3.6.1.4.1.10418.17.2.5.13.1.30 | INTEGER | RW | |
column · INTEGER · read-write · current noAction(1) = always returned in a GET. Does nothing if SET. reset(2) = when SET the reset command is sent to sensor.
| ||||
| CpmPowerMgmtSensorsTableHighCritical | 1.3.6.1.4.1.10418.17.2.5.13.1.40 | Integer32 | RW | |
column · Integer32 · read-write · current sensor high critical (alarm) threshold (unit x 10) - use unit as returned by pmPowerMgmtSensorsTableUnit. Set fails if value is lower that CurrentHighWarning. Returns 0 if not supported. | ||||
| CpmPowerMgmtSensorsTableHighWarning | 1.3.6.1.4.1.10418.17.2.5.13.1.41 | Integer32 | RW | |
column · Integer32 · read-write · current sensor high warning threshold (unit x 10) - use unit as returned by pmPowerMgmtSensorsTableUnit. Set fails if value is higher than HighCritical or lower than LowWarning. Returns 0 if not supported. | ||||
| CpmPowerMgmtSensorsTableLowWarning | 1.3.6.1.4.1.10418.17.2.5.13.1.42 | Integer32 | RW | |
column · Integer32 · read-write · current sensor low warning threshold (unit x 10) - use unit as returned by pmPowerMgmtSensorsTableUnit. Set fails if value is higher than HighWarning or lower than LowCritical. Returns 0 if not supported. | ||||
| CpmPowerMgmtSensorsTableLowCritical | 1.3.6.1.4.1.10418.17.2.5.13.1.43 | Integer32 | RW | |
column · Integer32 · read-write · current sensor low critical threshold (unit x 10) - use unit as returned by pmPowerMgmtSensorsTableUnit. Set fails if value is higher than LowWarning. Returns 0 if not supported. | ||||
| CpmPowerMgmtSensorsTableUnit | 1.3.6.1.4.1.10418.17.2.5.13.1.45 | INTEGER | RW | |
column · INTEGER · read-write · current sensor unit. Returns 0 if not supported.
| ||||
| CpmPowerMgmtSensorsTableHighCriticalC | 1.3.6.1.4.1.10418.17.2.5.13.1.50 | Integer32 | RO | |
column · Integer32 · read-only · current sensor high critical (alarm) threshold (Celcius x 10). to SET: use pmPowerMgmtSensorsTableHighCritical in proper units (pmPowerMgmtSensorsTableUnit). Returns 0 if not supported. | ||||
| CpmPowerMgmtSensorsTableHighWarningC | 1.3.6.1.4.1.10418.17.2.5.13.1.51 | Integer32 | RO | |
column · Integer32 · read-only · current sensor high warning threshold (Celcius x 10). to SET: use pmPowerMgmtSensorsTableHighWarning in proper units (pmPowerMgmtSensorsTableUnit). Returns 0 if not supported. | ||||
| CpmPowerMgmtSensorsTableLowWarningC | 1.3.6.1.4.1.10418.17.2.5.13.1.52 | Integer32 | RO | |
column · Integer32 · read-only · current sensor low warning threshold (Celcius x 10). to SET: use pmPowerMgmtSensorsTableLowWarning in proper units (pmPowerMgmtSensorsTableUnit). Returns 0 if not supported. | ||||
| CpmPowerMgmtSensorsTableLowCriticalC | 1.3.6.1.4.1.10418.17.2.5.13.1.53 | Integer32 | RO | |
column · Integer32 · read-only · current sensor low critical threshold (Celcius x 10). to SET: use pmPowerMgmtSensorsTableLowCritical in proper units (pmPowerMgmtSensorsTableUnit). Returns 0 if not supported. | ||||
| CpmPowerMgmtSensorsTableHighCriticalF | 1.3.6.1.4.1.10418.17.2.5.13.1.60 | Integer32 | RO | |
column · Integer32 · read-only · current sensor high critical (alarm) threshold (Fahrenheit x 10). to SET: use pmPowerMgmtSensorsTableHighCritical in proper units (pmPowerMgmtSensorsTableUnit). Returns 0 if not supported. | ||||
| CpmPowerMgmtSensorsTableHighWarningF | 1.3.6.1.4.1.10418.17.2.5.13.1.61 | Integer32 | RO | |
column · Integer32 · read-only · current sensor high warning threshold (Fahrenheit x 10). to SET: use pmPowerMgmtSensorsTableHighWarning in proper units (pmPowerMgmtSensorsTableUnit). Returns 0 if not supported. | ||||
| CpmPowerMgmtSensorsTableLowWarningF | 1.3.6.1.4.1.10418.17.2.5.13.1.62 | Integer32 | RO | |
column · Integer32 · read-only · current sensor low warning threshold (Fahrenheit x 10). to SET: use pmPowerMgmtSensorsTableLowWarning in proper units (pmPowerMgmtSensorsTableUnit). Returns 0 if not supported. | ||||
| CpmPowerMgmtSensorsTableLowCriticalF | 1.3.6.1.4.1.10418.17.2.5.13.1.63 | Integer32 | RO | |
column · Integer32 · read-only · current sensor low critical threshold (Fahrenheit x 10). to SET: use pmPowerMgmtSensorsTableLowCritical in proper units (pmPowerMgmtSensorsTableUnit). Returns 0 if not supported. | ||||
| NpmTrapObject | 1.3.6.1.4.1.10418.17.2.6 | |||