AcAtm
AudioCodes LTDThe Audiocodes ATMMIB.
snmptranslate -m AcAtm -Tpsnmpwalk -v2c -c <community> -m AcAtm <host> 1.3.6.1.4.1.5003.9.10.6Imports
| ATM-TC-MIB | AtmAddr |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, RowStatus, TAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| NaudioCodes | 1.3.6.1.4.1.5003 | |||
| NacRegistrations | 1.3.6.1.4.1.5003.7 | |||
| NacGeneric | 1.3.6.1.4.1.5003.8 | |||
| NacProducts | 1.3.6.1.4.1.5003.9 | |||
| NacBoardMibs | 1.3.6.1.4.1.5003.9.10 | |||
| IacAtm | 1.3.6.1.4.1.5003.9.10.6 | |||
identity The Audiocodes ATMMIB. | ||||
| NacAtmConfiguration | 1.3.6.1.4.1.5003.9.10.6.1 | |||
| NatmGeneralParams | 1.3.6.1.4.1.5003.9.10.6.1.1 | |||
| SatmGeneralParamsAtmDefaultApplicationType | 1.3.6.1.4.1.5003.9.10.6.1.1.1 | INTEGER | RW | obsolete |
scalar · INTEGER · read-write · obsolete This is the default application type used when the board cannot determine from the H248 add message which AAL type to use.
| ||||
| SatmGeneralParamsAtmTransmissionMode | 1.3.6.1.4.1.5003.9.10.6.1.1.2 | INTEGER | RW | obsolete |
scalar · INTEGER · read-write · obsolete This is the ATM Port Optical Carrier type which indicates whether the European standard (SDH) is to be employed or the North American Standard (SONET)
| ||||
| NatmPort | 1.3.6.1.4.1.5003.9.10.6.1.2 | |||
| TatmPortTable | 1.3.6.1.4.1.5003.9.10.6.1.2.1 | NA | obsolete | |
table · not-accessible · obsolete This table indicates general information about and alarm status of the ATM optical fiber ports. It is also used to configure the ATM address associated with the optical port and read that address. | ||||
| RatmPortEntry | 1.3.6.1.4.1.5003.9.10.6.1.2.1.1 | NA | obsolete | |
row · not-accessible · obsolete
| ||||
| CatmPortAdministrativeState | 1.3.6.1.4.1.5003.9.10.6.1.2.1.1.1 | INTEGER | RW | obsolete |
column · INTEGER · read-write · obsolete This is the ATM Port Administrative State
| ||||
| CatmPortOperationalState | 1.3.6.1.4.1.5003.9.10.6.1.2.1.1.2 | INTEGER | RO | obsolete |
column · INTEGER · read-only · obsolete This is the Port Operational State
| ||||
| CatmPortNumber | 1.3.6.1.4.1.5003.9.10.6.1.2.1.1.3 | INTEGER | RO | obsolete |
column · INTEGER · read-only · obsolete This is the ATM Port Number
| ||||
| CatmPortAdminAddress | 1.3.6.1.4.1.5003.9.10.6.1.2.1.1.4 | AtmAddr (SIZE (0..40)) | RW | obsolete |
column · AtmAddr (SIZE (0..40)) · read-write · obsolete This is the Administrative ATM Port Address (20 octets in length - 40 hexadecimal characters). This address is manually configured. This address is used when ILMI is not available. | ||||
| CatmPortOperationalAddress | 1.3.6.1.4.1.5003.9.10.6.1.2.1.1.5 | AtmAddr (SIZE (0..40)) | RO | obsolete |
column · AtmAddr (SIZE (0..40)) · read-only · obsolete This is the port ATM address currently in operation (i.e.:assigned to this port). This address is set to atmPortAdminAddress if no ILMI address is registered. If an ILMI address is successfully registered, then atmPortOperationalAddress will be set to the ILMI one, though an administrative address may have already been configured. Thus ILMI address always takes precedence over the administrative one. If both the administrative and ILMI addresses are unavailable then the operational address is left empty. Refer to atmPortAddressMode for which address is operational. | ||||
| CatmPortAlarmStatus | 1.3.6.1.4.1.5003.9.10.6.1.2.1.1.6 | INTEGER | RO | obsolete |
column · INTEGER · read-only · obsolete This is the ATM Port Alarm Status. The possible values are: cleared(0) - LOS, AIS and RDI conditions are not present los(1) - the LOS condition is present ais(2) - AIS condition is present (LOS condition is not present) rdi(4) - RDI condition is present (LOS and AIS conditions are not present) Note: Alarm conditions (from the SONET/SDH standard documents) are: LOS - Loss Of Signal AIS - Alarm Indication Signal RDI - Remote Defect Indication
| ||||
| CatmPortAddressMode | 1.3.6.1.4.1.5003.9.10.6.1.2.1.1.7 | INTEGER | RO | obsolete |
column · INTEGER · read-only · obsolete The mode reflects the type of address in operation. addrModeNone(0) : No administrative address has been configured and no ILMI address has been registered. Thus no address is available to assign to the port. addrModeManual(1): An Administrative address has been configured and no ILMI address has been registered. Thus the port is assigned the manually configured address.addrModeILMI (2): An ILMI address has been registered. The port is assigned this address. The administrative address is ignored if it has been configured.
| ||||
| NatmRemoteGateway | 1.3.6.1.4.1.5003.9.10.6.1.3 | |||
| TatmRemoteGatewayTable | 1.3.6.1.4.1.5003.9.10.6.1.3.1 | NA | obsolete | |
table · not-accessible · obsolete This includes the destination remote Gateways (and RNC) that the Media Gateway would have signaling contact with. | ||||
| RatmRemoteGatewayEntry | 1.3.6.1.4.1.5003.9.10.6.1.3.1.1 | NA | obsolete | |
row · not-accessible · obsolete | ||||
| CatmRemoteGatewayRowStatus | 1.3.6.1.4.1.5003.9.10.6.1.3.1.1.1 | RowStatus | RC | obsolete |
column · RowStatus · read-create · obsolete The RowStatus textual convention is used to manage the creation and deletion and active of conceptual rows. | ||||
| CatmRemoteGatewayAction | 1.3.6.1.4.1.5003.9.10.6.1.3.1.1.2 | INTEGER (0..100) | RO | obsolete |
column · INTEGER (0..100) · read-only · obsolete Development Pending -for future use | ||||
| CatmRemoteGatewayActionResult | 1.3.6.1.4.1.5003.9.10.6.1.3.1.1.3 | INTEGER (0..100) | RO | obsolete |
column · INTEGER (0..100) · read-only · obsolete Development Pending -future use | ||||
| CatmRemoteGatewayIndex | 1.3.6.1.4.1.5003.9.10.6.1.3.1.1.4 | INTEGER (0..99) | RW | obsolete |
column · INTEGER (0..99) · read-write · obsolete . | ||||
| CatmRemoteGatewayName | 1.3.6.1.4.1.5003.9.10.6.1.3.1.1.5 | OCTET STRING (SIZE (0..20)) | RW | obsolete |
column · OCTET STRING (SIZE (0..20)) · read-write · obsolete Remote Gateway name | ||||
| CatmRemoteGatewayNSAPAddress | 1.3.6.1.4.1.5003.9.10.6.1.3.1.1.6 | AtmAddr (SIZE (0..40)) | RW | obsolete |
column · AtmAddr (SIZE (0..40)) · read-write · obsolete This is the ATM Address associated with the remote Gateway to which this PVC connects (20 octets in length - 40 hexadecimal characters) | ||||
| CatmRemoteGatewayALCAPInstanceNum | 1.3.6.1.4.1.5003.9.10.6.1.3.1.1.7 | INTEGER (0..7) | RW | obsolete |
column · INTEGER (0..7) · read-write · obsolete ALCAP Instance number associated with the remote Gateway ( 3G only) | ||||
| Naal2PVC | 1.3.6.1.4.1.5003.9.10.6.1.4 | |||
| Taal2PVCTable | 1.3.6.1.4.1.5003.9.10.6.1.4.1 | NA | obsolete | |
table · not-accessible · obsolete This table contains information referring to Permanent Virtual Channels connecting the AMS to the ATM Edge Switch. | ||||
| Raal2PVCEntry | 1.3.6.1.4.1.5003.9.10.6.1.4.1.1 | NA | obsolete | |
row · not-accessible · obsolete | ||||
| Caal2PVCRowStatus | 1.3.6.1.4.1.5003.9.10.6.1.4.1.1.1 | RowStatus | RC | obsolete |
column · RowStatus · read-create · obsolete The RowStatus textual convention is used to manage the creation and deletion and active of conceptual rows. | ||||
| Caal2PVCAction | 1.3.6.1.4.1.5003.9.10.6.1.4.1.1.2 | INTEGER | RO | obsolete |
column · INTEGER · read-only · obsolete Development Pending - for future use
| ||||
| Caal2PVCActionResult | 1.3.6.1.4.1.5003.9.10.6.1.4.1.1.3 | INTEGER | RO | obsolete |
column · INTEGER · read-only · obsolete Development Pending - for future use
| ||||
| Caal2PVCRemoteGatewayIndex | 1.3.6.1.4.1.5003.9.10.6.1.4.1.1.4 | INTEGER (0..99) | RW | obsolete |
column · INTEGER (0..99) · read-write · obsolete This is the gw index that associated with the remote Gateway table to which this PVC connects (20 octets in length - 40 hexadecimal characters) | ||||
| Caal2PVCVCCIPATHID | 1.3.6.1.4.1.5003.9.10.6.1.4.1.1.5 | INTEGER (1..8191) | RW | obsolete |
column · INTEGER (1..8191) · read-write · obsolete This is the range of Virtual Connection Channel Identifiers which is an end to end identifier for an AAL2 VC. | ||||
| Caal2PVCPortNumber | 1.3.6.1.4.1.5003.9.10.6.1.4.1.1.6 | INTEGER | RW | obsolete |
column · INTEGER · read-write · obsolete This is the port number associated with the PVC
| ||||
| Caal2PVCVpi | 1.3.6.1.4.1.5003.9.10.6.1.4.1.1.7 | INTEGER (0..255) | RW | obsolete |
column · INTEGER (0..255) · read-write · obsolete This is the VPI assigned to the PVC | ||||
| Caal2PVCVci | 1.3.6.1.4.1.5003.9.10.6.1.4.1.1.8 | INTEGER (0..65535) | RW | obsolete |
column · INTEGER (0..65535) · read-write · obsolete This is the VCI assigned to the PVC | ||||
| Caal2PVCMaxNumOfCid | 1.3.6.1.4.1.5003.9.10.6.1.4.1.1.9 | INTEGER (1..248) | RW | obsolete |
column · INTEGER (1..248) · read-write · obsolete This is the maximum number of CIDs for the AAL2 PVC. | ||||
| Caal2PVCNumOfCidInUse | 1.3.6.1.4.1.5003.9.10.6.1.4.1.1.10 | INTEGER (1..248) | RO | obsolete |
column · INTEGER (1..248) · read-only · obsolete This is the number of CIDs for AAL2 PVC currently in use. | ||||
| Caal2PVCServiceCategory | 1.3.6.1.4.1.5003.9.10.6.1.4.1.1.11 | INTEGER | RW | obsolete |
column · INTEGER · read-write · obsolete This is the Service Category which is either CBR (Constant Bit Rate) or rtVBR (realtime Variable Bit Rate)
| ||||
| Caal2PVCPCR | 1.3.6.1.4.1.5003.9.10.6.1.4.1.1.12 | INTEGER (0..49600) | RW | obsolete |
column · INTEGER (0..49600) · read-write · obsolete This is the peak cell rate (PCR) associated with the provisioned virtual channel (PVC). Includes bandwidth for all CIDs within the PVC | ||||
| Caal2PVCSCR | 1.3.6.1.4.1.5003.9.10.6.1.4.1.1.13 | INTEGER (0..49600) | RW | obsolete |
column · INTEGER (0..49600) · read-write · obsolete This is the sustained cell rate (SCR) associated with the provisioned virtual channel (PVC). Includes bandwidth for all CIDs within the PVC. | ||||
| Caal2PVCMBS | 1.3.6.1.4.1.5003.9.10.6.1.4.1.1.14 | INTEGER (0..100) | RW | obsolete |
column · INTEGER (0..100) · read-write · obsolete This is the Maximum Burst Size (MBS) for the provisioned virtual channel (PVC). | ||||
| NatmPortLoopbackConfig | 1.3.6.1.4.1.5003.9.10.6.1.5 | |||
| TatmPortLoopbackConfigTable | 1.3.6.1.4.1.5003.9.10.6.1.5.1 | NA | obsolete | |
table · not-accessible · obsolete This table gives the Loopback Configuration associated with a given Optical Fiber Port number. | ||||
| RatmPortLoopbackConfigEntry | 1.3.6.1.4.1.5003.9.10.6.1.5.1.1 | NA | obsolete | |
row · not-accessible · obsolete | ||||
| CatmPortLoopbackConfigIsUsed | 1.3.6.1.4.1.5003.9.10.6.1.5.1.1.1 | INTEGER | RW | obsolete |
column · INTEGER · read-write · obsolete This tells whether or not the port loopback is used. If the port is available on the board, this is yes.
| ||||
| CatmPortLoopbackConfigAction | 1.3.6.1.4.1.5003.9.10.6.1.5.1.1.2 | INTEGER | RO | obsolete |
column · INTEGER · read-only · obsolete Development Pending - for future use
| ||||
| CatmPortLoopbackConfigActionResult | 1.3.6.1.4.1.5003.9.10.6.1.5.1.1.3 | INTEGER | RO | obsolete |
column · INTEGER · read-only · obsolete Development Pending - for future use
| ||||
| CatmPortLoopbackConfigPortNumber | 1.3.6.1.4.1.5003.9.10.6.1.5.1.1.4 | INTEGER | RW | obsolete |
column · INTEGER · read-write · obsolete The port number associated with the optical port which is being described.
| ||||
| CatmPortLoopbackConfigMode | 1.3.6.1.4.1.5003.9.10.6.1.5.1.1.5 | INTEGER | RW | obsolete |
column · INTEGER · read-write · obsolete This is the mode in which the loopback will work: no loopback, UNI loopback, or Virtual Path loopback
| ||||
| CatmPortLoopbackConfigOutBoundVirtualPath | 1.3.6.1.4.1.5003.9.10.6.1.5.1.1.6 | INTEGER (1..255) | RW | obsolete |
column · INTEGER (1..255) · read-write · obsolete If the atmLoopback mode is VP, this specifies the VP identity for the cells going toward the ATM edge switch | ||||
| CatmPortLoopbackConfigInBoundVirtualPath | 1.3.6.1.4.1.5003.9.10.6.1.5.1.1.7 | INTEGER (1..255) | RW | obsolete |
column · INTEGER (1..255) · read-write · obsolete If the atmLoopback mode is VP, this specifies the VP identity for the cells coming from the ATM edge switch | ||||
| CatmPortLoopbackConfigVciRangeFirst | 1.3.6.1.4.1.5003.9.10.6.1.5.1.1.8 | INTEGER (33..2047) | RW | obsolete |
column · INTEGER (33..2047) · read-write · obsolete If the atmLoopback mode is VP, this specifies the minimum VCI within the inbound and outbound VP which may be used. | ||||
| CatmPortLoopbackConfigVciRangeLast | 1.3.6.1.4.1.5003.9.10.6.1.5.1.1.9 | INTEGER (33..2047) | RW | obsolete |
column · INTEGER (33..2047) · read-write · obsolete If the atmLoopback mode is VP, this specifies the maximum VCI within the inbound and outbound VP which may be used. | ||||
| CatmPortLoopbackConfigServiceCategory | 1.3.6.1.4.1.5003.9.10.6.1.5.1.1.10 | INTEGER | RW | obsolete |
column · INTEGER · read-write · obsolete This category is limited to Constant Bit Rate (CBR) traffic or realtime Variable Bit Rate (rtVBR) for this release.
| ||||
| CatmPortLoopbackConfigPCR | 1.3.6.1.4.1.5003.9.10.6.1.5.1.1.11 | INTEGER (171..59600) | RW | obsolete |
column · INTEGER (171..59600) · read-write · obsolete This is the peak cell rate (PCR) associated with the switched virtual channel (SVC). This is used for Constant Bit Rate (CBR) traffic. For AAL2, this includes bandwidth for all CIDs within the SVC. For AAL1, there is only one channel per SVC (and no concept of a CID). | ||||
| CatmPortLoopbackConfigSCR | 1.3.6.1.4.1.5003.9.10.6.1.5.1.1.12 | INTEGER (171..59600) | RW | obsolete |
column · INTEGER (171..59600) · read-write · obsolete This is the sustained cell rate (SCR) associated with the switched virtual channel (SVC). This is used for realtime Variable Bit Rate (rtVBR) traffice. For AAL2, this includes bandwidth for all CIDs within the SVC. For AAL1, there is only one channel per SVC (and no concept of a CID). | ||||
| CatmPortLoopbackConfigMBS | 1.3.6.1.4.1.5003.9.10.6.1.5.1.1.13 | INTEGER (1..100) | RW | obsolete |
column · INTEGER (1..100) · read-write · obsolete This is the Maximum Burst Size (MBS) associated with the switched virtual channel (SVC). This is used in realtime Variable Bit Rate (rtVBR) traffice. The unit for this parameter is ATM cells. | ||||
| NatmSvcProfile | 1.3.6.1.4.1.5003.9.10.6.1.6 | |||
| TatmSvcProfileTable | 1.3.6.1.4.1.5003.9.10.6.1.6.1 | NA | obsolete | |
table · not-accessible · obsolete This table indicates information about profiles associated with the creation of each new AAL2 SVC. | ||||
| RatmSvcProfileEntry | 1.3.6.1.4.1.5003.9.10.6.1.6.1.1 | NA | obsolete | |
row · not-accessible · obsolete
| ||||
| CatmSvcProfileIsUsed | 1.3.6.1.4.1.5003.9.10.6.1.6.1.1.1 | INTEGER | RW | obsolete |
column · INTEGER · read-write · obsolete This tells whether or not this SVC profile is used. If it is used, the value is yes.
| ||||
| CatmSvcProfileIndex | 1.3.6.1.4.1.5003.9.10.6.1.6.1.1.2 | INTEGER (1..550) | RW | obsolete |
column · INTEGER (1..550) · read-write · obsolete Initially only one SVC Profile is supported. This parameter may be updated later as the table supports more profiles | ||||
| CatmSvcProfileMaxNumOfCids | 1.3.6.1.4.1.5003.9.10.6.1.6.1.1.3 | INTEGER (1..248) | RW | obsolete |
column · INTEGER (1..248) · read-write · obsolete The CIDs fall in the range of 8 to 255, so there are a maximum of 248 CIDs possible. The assignment of CID #8 may be received but not initiated. Assignments from the low end of the CID range should start with 9 as there are some vendors who use 8 for a special OAM purpose. | ||||
| CatmSvcProfilePCR | 1.3.6.1.4.1.5003.9.10.6.1.6.1.1.4 | INTEGER (171..59600) | RW | obsolete |
column · INTEGER (171..59600) · read-write · obsolete This is the peak cell rate (PCR) associated with the switched virtual channel (SVC). This is used for Constant Bit Rate (CBR) traffic. For AAL2, this includes bandwidth for all CIDs within the SVC. For AAL1, there is only one channel per SVC (and no concept of a CID). | ||||
| CatmSvcProfileSCR | 1.3.6.1.4.1.5003.9.10.6.1.6.1.1.5 | INTEGER (171..59600) | RW | obsolete |
column · INTEGER (171..59600) · read-write · obsolete This is the sustained cell rate (SCR) associated with the switched virtual channel (SVC). This is used for realtime Variable Bit Rate (rtVBR) traffice. For AAL2, this includes bandwidth for all CIDs within the SVC. For AAL1, there is only one channel per SVC (and no concept of a CID). | ||||
| CatmSvcProfileMBS | 1.3.6.1.4.1.5003.9.10.6.1.6.1.1.6 | INTEGER (1..100) | RW | obsolete |
column · INTEGER (1..100) · read-write · obsolete This is the Maximum Burst Size (MBS) associated with the switched virtual channel (SVC). This is used in realtime Variable Bit Rate (rtVBR) traffice. The unit for this parameter is ATM cells. | ||||
| CatmSvcProfilePersistence | 1.3.6.1.4.1.5003.9.10.6.1.6.1.1.7 | INTEGER (0..10000) | RW | obsolete |
column · INTEGER (0..10000) · read-write · obsolete This is the parameter which descirbes how long an AAL2 SVC will persist even when no CIDs are in use. Generally, this is on the order of 180 to 600 seconds. Non-persistent SVCs should have a value of 0. | ||||
| CatmSvcProfileServiceCategory | 1.3.6.1.4.1.5003.9.10.6.1.6.1.1.8 | INTEGER | RW | obsolete |
column · INTEGER · read-write · obsolete This category is limited to Constant Bit Rate (CBR) traffic or realtime Variable Bit Rate (rtVBR) for this release.
| ||||
| NacAtmStatus | 1.3.6.1.4.1.5003.9.10.6.2 | |||
| NatmSvcConnection | 1.3.6.1.4.1.5003.9.10.6.2.1 | |||
| TatmSvcConnectionTable | 1.3.6.1.4.1.5003.9.10.6.2.1.1 | NA | obsolete | |
table · not-accessible · obsolete This is the table which describes the read only characteristics of a given AAL1 or AAL2 SVC. | ||||
| RatmSvcConnectionEntry | 1.3.6.1.4.1.5003.9.10.6.2.1.1.1 | NA | obsolete | |
row · not-accessible · obsolete | ||||
| CatmSvcConnectionIndex | 1.3.6.1.4.1.5003.9.10.6.2.1.1.1.1 | INTEGER (0..500) | RO | obsolete |
column · INTEGER (0..500) · read-only · obsolete A unique index, that identifies the SVC on the system. | ||||
| CatmSvcConnectionRemoteGatewayAddress | 1.3.6.1.4.1.5003.9.10.6.2.1.1.1.2 | AtmAddr (SIZE (0..40)) | RO | obsolete |
column · AtmAddr (SIZE (0..40)) · read-only · obsolete This is the ATM Address associated with the remote Gateway to which this SVC connects (20 octets in length - 40 hexadecimal characters) | ||||
| CatmSvcConnectionPort | 1.3.6.1.4.1.5003.9.10.6.2.1.1.1.3 | INTEGER | RO | obsolete |
column · INTEGER · read-only · obsolete This is the port on which the SVC is connected
| ||||
| CatmSvcConnectionVpi | 1.3.6.1.4.1.5003.9.10.6.2.1.1.1.4 | INTEGER (0..255) | RO | obsolete |
column · INTEGER (0..255) · read-only · obsolete This is the VPI associated with the SVC | ||||
| CatmSvcConnectionVci | 1.3.6.1.4.1.5003.9.10.6.2.1.1.1.5 | INTEGER (0..65535) | RO | obsolete |
column · INTEGER (0..65535) · read-only · obsolete This is the VCI associated with the SVC | ||||
| CatmSvcConnectionAALType | 1.3.6.1.4.1.5003.9.10.6.2.1.1.1.6 | INTEGER | RO | obsolete |
column · INTEGER · read-only · obsolete This is the Adaptation Layer type. It is either AAL1 or AAL2.
| ||||
| CatmSvcConnectionDirection | 1.3.6.1.4.1.5003.9.10.6.2.1.1.1.7 | INTEGER | RO | obsolete |
column · INTEGER · read-only · obsolete This is the direction in which the SVC was setup. Incoming means the this end received the SETUP. Outgoing means this end sent the SETUP.
| ||||
| CatmSvcConnectionEecid | 1.3.6.1.4.1.5003.9.10.6.2.1.1.1.8 | Unsigned32 | RO | obsolete |
column · Unsigned32 · read-only · obsolete This is the unique end to end identifier associated with the setup of AAL1 SVCs | ||||
| CatmSvcConnectionVcci | 1.3.6.1.4.1.5003.9.10.6.2.1.1.1.9 | INTEGER (0..65535) | RO | obsolete |
column · INTEGER (0..65535) · read-only · obsolete This is the unique identity of an SVC associated with an AAL2 connection | ||||
| CatmSvcConnectionMaxNumOfCid | 1.3.6.1.4.1.5003.9.10.6.2.1.1.1.10 | INTEGER (1..248) | RO | obsolete |
column · INTEGER (1..248) · read-only · obsolete This is the maximum number of CIDs for an AAL2 SVC. | ||||
| CatmSvcConnectionNumOfCidInUse | 1.3.6.1.4.1.5003.9.10.6.2.1.1.1.11 | INTEGER (1..248) | RO | obsolete |
column · INTEGER (1..248) · read-only · obsolete This is the number of channel Ids currently in use in a given SVC. | ||||