AC-MEDIA-MIB
AudioCodes LTDsnmptranslate -m AC-MEDIA-MIB -Tpsnmpwalk -v2c -c <community> -m AC-MEDIA-MIB <host> 1.3.6.1.4.1.5003.9.10.4Imports
| AUDIOCODES-TYPES-MIB | acBoardMibs, acGeneric, acProducts, acRegistrations, audioCodes |
|---|---|
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, RowStatus, TAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IacMedia | 1.3.6.1.4.1.5003.9.10.4 | |||
| NacMediaConfiguration | 1.3.6.1.4.1.5003.9.10.4.1 | |||
| NacMediaDSPConfig | 1.3.6.1.4.1.5003.9.10.4.1.1 | |||
| SacMediaDSPConfigVersionTemplateNumber | 1.3.6.1.4.1.5003.9.10.4.1.1.1 | Unsigned32 (0..255) | RW | |
scalar · Unsigned32 (0..255) · read-write · current Selects the DSP load number. Each load has a different coder list, a different channel capacity and different features supported. Range = 0 to 255. Access: Offline. AC INI-Param: DSPVERSIONTEMPLATENUMBER | ||||
| TacMediaDspTable | 1.3.6.1.4.1.5003.9.10.4.1.1.21 | NA | ||
| RacMediaDspEntry | 1.3.6.1.4.1.5003.9.10.4.1.1.21.1 | NA | ||
row · not-accessible · current
| ||||
| CacMediaDspIndex | 1.3.6.1.4.1.5003.9.10.4.1.1.21.1.1 | Unsigned32 (0..1) | NA | |
column · Unsigned32 (0..1) · not-accessible · current Entry number in the table. AC INI-Param: DspTemplates_Index | ||||
| CacMediaDspRowStatus | 1.3.6.1.4.1.5003.9.10.4.1.1.21.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current ROWSTATUS field for line. Internal parameter. AC INI-Param: N/A | ||||
| CacMediaDspTemplateNumber | 1.3.6.1.4.1.5003.9.10.4.1.1.21.1.3 | Unsigned32 (0..16) | RC | |
column · Unsigned32 (0..16) · read-create · current DSP template number. Access: Offline. AC INI-Param: DspTemplates_DspTemplateNumber | ||||
| CacMediaDspResourcesPercentage | 1.3.6.1.4.1.5003.9.10.4.1.1.21.1.4 | Unsigned32 (0..100) | RC | |
column · Unsigned32 (0..100) · read-create · current Percentage use for the specified template. Access: Offline. AC INI-Param: DspTemplates_DspResourcesPercentage | ||||
| NacMediaVoiceConfig | 1.3.6.1.4.1.5003.9.10.4.1.2 | |||
| NacVoice | 1.3.6.1.4.1.5003.9.10.4.1.2.1 | |||
| SacVoicePayloadFormat | 1.3.6.1.4.1.5003.9.10.4.1.2.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Sets the voice payload format. Choose either 0 = RTP or 1 = ATM (which enables working with vendors that use G.726 ATM Payload Format over RTP. Uses the enum acTVoicePayloadFormat. 0 = VoicePayloadFormatRTP 1 = VoicePayloadFormatATM 2 = VoicePAyloadFormatIllegal. Access: Online. AC INI-Param: VOICEPAYLOADFORMAT
| ||||
| SacVoiceVolume | 1.3.6.1.4.1.5003.9.10.4.1.2.1.2 | Integer32 (-32..31) | RW | |
scalar · Integer32 (-32..31) · read-write · current Defines the voice output gain control. Range: -32 dB to +31 dB in 1 dB steps -32 = mute Default = 0 = No Gain. Access: Online. AC INI-Param: VOICEVOLUME | ||||
| SacVoiceInputGain | 1.3.6.1.4.1.5003.9.10.4.1.2.1.3 | Integer32 (-32..31) | RW | |
scalar · Integer32 (-32..31) · read-write · current Defines the PCM input gain. Range = -32 dB to +31 dB in 1 dB steps. Default = No Gain. Access: Online. AC INI-Param: INPUTGAIN | ||||
| SacVoiceTestMode | 1.3.6.1.4.1.5003.9.10.4.1.2.1.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Defines the type of testing mode applied: 0 = Coder Loopback performs an encoder/decoder loopback inside the DSP device 1 = PCM Loopback loops back an incoming PCM to the outgoing PCM. 2 = ToneInjection generates a 1000 Hz tone to the outgoing PCM 3 = NoLoopback sets the channel to work in normal mode. Access: Online. AC INI-Param: TESTMODE
| ||||
| SacVoiceTTYTransportType | 1.3.6.1.4.1.5003.9.10.4.1.2.1.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current Defines the transferring method of TTY signals during a call 0 = Disable 1= Bypass 2 = Relay . Access: Online. AC INI-Param: TTYTRANSPORTTYPE
| ||||
| SacVoiceEnableMediaSecurity | 1.3.6.1.4.1.5003.9.10.4.1.2.1.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enables or disables Media Security protocol (SRTP) . Enabling this parameter might reduce the board channel capacity. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: ENABLEMEDIASECURITY
| ||||
| SacVoiceAriaProtocolSupport | 1.3.6.1.4.1.5003.9.10.4.1.2.1.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enables or disables Aria encryption protocol. Enabling this parameter might reduce the board channel capacity. 0 = Disable 1 = Enable Supported on M800. Access: Offline. AC INI-Param: AriaProtocolSupport
| ||||
| NacVoiceCoderRate | 1.3.6.1.4.1.5003.9.10.4.1.2.1.20 | |||
| SacVoiceCoderRateEVRC | 1.3.6.1.4.1.5003.9.10.4.1.2.1.20.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current This parameter is used to configure the EVRC coder bit rate. 0 = Variable Rate 1 = 1 kbps 2 = 4 kbps 3 = 8 kbps. Access: Online. AC INI-Param: EVRCRate
| ||||
| SacVoiceCoderRateQCELP8 | 1.3.6.1.4.1.5003.9.10.4.1.2.1.20.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current This parameter is used to configure the QCELP8 coder bit rate. 0 = Variable Rate 1 = 1 kbps 2 = 2 kbps 3 = 4 kbps 4 = 8 kbps. Access: Online. AC INI-Param: QCELP8Rate
| ||||
| SacVoiceCoderRateQCELP13 | 1.3.6.1.4.1.5003.9.10.4.1.2.1.20.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current This parameter is used to configure the QCELP13 coder bit rate. 0 = Variable Rate 1 = 1 kbps 2 = 3 kbps 3 = 7 kbps 4 = 13 kbps . Access: Online. AC INI-Param: QCELP13Rate
| ||||
| SacVoiceCoderRateG729EVMaxBitRate | 1.3.6.1.4.1.5003.9.10.4.1.2.1.20.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Determines the maximum generation bitrate for all participants in a session using G729EV coder. This parameter is defined per session and is equal for all the parties. The initial generation bit rate is the minimum between the MaxBitRate and the MBS values. Possible values are: 0 = G729EV_RATE_8_KBPS 1 = G729EV_RATE_12_KBPS 2 = G729EV_RATE_14_KBPS 3 = G729EV_RATE_16_KBPS 4 = G729EV_RATE_18_KBPS 5 = G729EV_RATE_20_KBPS 6 = G729EV_RATE_22_KBPS 7 = G729EV_RATE_24_KBPS 8 = G729EV_RATE_26_KBPS 9 = G729EV_RATE_28_KBPS 10 = G729EV_RATE_30_KBPS 11 = G729EV_RATE_32_KBPS 15 = G729EV_RATE_UNDEFINED. Access: Online. AC INI-Param: G729EVMaxBitRate
| ||||
| SacVoiceCoderRateG729EVLocalMBS | 1.3.6.1.4.1.5003.9.10.4.1.2.1.20.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current Determines the maximal bitrate, which may be used by the G729EV coder at a specific channel. This parameter is defined per channel and may vary between the parties. The initial generation bit rate is the minimum between the MaxBitRate and the MBS values. Possible values are: 0 = G729EV_RATE_8_KBPS 1 = G729EV_RATE_12_KBPS 2 = G729EV_RATE_14_KBPS 3 = G729EV_RATE_16_KBPS 4 = G729EV_RATE_18_KBPS 5 = G729EV_RATE_20_KBPS 6 = G729EV_RATE_22_KBPS 7 = G729EV_RATE_24_KBPS 8 = G729EV_RATE_26_KBPS 9 = G729EV_RATE_28_KBPS 10 = G729EV_RATE_30_KBPS 11 = G729EV_RATE_32_KBPS 15 = G729EV_RATE_UNDEFINED. Access: Online. AC INI-Param: G729EVLocalMBS
| ||||
| SacVoiceCoderRateG729EVReceiveMBS | 1.3.6.1.4.1.5003.9.10.4.1.2.1.20.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Determines the value of the MBS field of the G729EV frames to be sent to the other party. This parameter reflects the maximum bit rate, which the local G729EV supports as a receiver. Possible values are: 0 = G729EV_RATE_8_KBPS 1 = G729EV_RATE_12_KBPS 2 = G729EV_RATE_14_KBPS 3 = G729EV_RATE_16_KBPS 4 = G729EV_RATE_18_KBPS 5 = G729EV_RATE_20_KBPS 6 = G729EV_RATE_22_KBPS 7 = G729EV_RATE_24_KBPS 8 = G729EV_RATE_26_KBPS 9 = G729EV_RATE_28_KBPS 10 = G729EV_RATE_30_KBPS 11 = G729EV_RATE_32_KBPS 15 = G729EV_RATE_UNDEFINED. Access: Online. AC INI-Param: G729EVReceiveMBS
| ||||
| SacVoiceCoderRateMsRtaForwardErrorCorrectionEnable | 1.3.6.1.4.1.5003.9.10.4.1.2.1.20.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current Determines the Microsoft RTA coder forward error correction mode. 0 - Disable. 1 - Enable. Access: Online. AC INI-Param: MSRTAForwardErrorCorrectionEnable
| ||||
| SacVoiceCoderRateMsRtaTxBitRate | 1.3.6.1.4.1.5003.9.10.4.1.2.1.20.8 | Unsigned32 (0..29000) | RW | |
scalar · Unsigned32 (0..29000) · read-write · current Determines the Microsoft RTA coder TX bit rate. 0 - Automatic. Any value between 8,800 - 29,000. Access: Online. AC INI-Param: MSRTATxBitRate | ||||
| SacVoiceCoderRateSilkTxInbandFEC | 1.3.6.1.4.1.5003.9.10.4.1.2.1.20.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current Determines the SILK encoder forward error correction mode. Access: Online. AC INI-Param: SilkTxInbandFEC
| ||||
| SacVoiceCoderRateSilkMaxAverageBitRate | 1.3.6.1.4.1.5003.9.10.4.1.2.1.20.10 | Unsigned32 (5000..30000) | RW | |
scalar · Unsigned32 (5000..30000) · read-write · current Determines the SILK encoder maximal average bit rate. Narrow band range is 5000-16000 .Wide band range is 8000-30000. Access: Online. AC INI-Param: SilkMaxAverageBitRate | ||||
| SacVoiceCoderRateSpeexNBBitRate | 1.3.6.1.4.1.5003.9.10.4.1.2.1.20.11 | INTEGER | RW | |
scalar · INTEGER · read-write · current Determines the bitrate of Speex NB coder. Access: Instant. AC INI-Param: SpeexNBBitRate
| ||||
| SacVoiceCoderRateSpeexWBBitRate | 1.3.6.1.4.1.5003.9.10.4.1.2.1.20.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current Determines the bitrate of Speex WB coder. Access: Instant. AC INI-Param: SpeexWBBitRate
| ||||
| NacVoiceAGC | 1.3.6.1.4.1.5003.9.10.4.1.2.2 | |||
| SacVoiceAGCEnable | 1.3.6.1.4.1.5003.9.10.4.1.2.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Activates the AGC (Automatic Gain Control). 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ENABLEAGC
| ||||
| SacVoiceAGCGainSlope | 1.3.6.1.4.1.5003.9.10.4.1.2.2.2 | Unsigned32 (0..31) | RW | |
scalar · Unsigned32 (0..31) · read-write · current Determines the AGC (Automatic Gain Control) convergence rate. Range = 0 to 31 (according to acTAGCGainSlope) Default = 3 (= 1 db/sec). Access: Online. AC INI-Param: AGCGAINSLOPE | ||||
| SacVoiceAGCRedirection | 1.3.6.1.4.1.5003.9.10.4.1.2.2.3 | Unsigned32 (0..1) | RW | |
scalar · Unsigned32 (0..1) · read-write · current Determines the AGC (Automatic Gain Control) direction. 0 = AGC works on signals from the TDM side 1 = AGC works on signals coming from the Network side. Access: Online. AC INI-Param: AGCREDIRECTION | ||||
| SacVoiceAGCTargetEnergy | 1.3.6.1.4.1.5003.9.10.4.1.2.2.4 | Unsigned32 (0..63) | RW | |
scalar · Unsigned32 (0..63) · read-write · current Determines the signal energy value [-dBm] that the AGC (Automatic Gain Control) attempts to attain. Range = 0 to 63. Access: Online. AC INI-Param: AGCTARGETENERGY | ||||
| SacVoiceAGCMinGain | 1.3.6.1.4.1.5003.9.10.4.1.2.2.5 | Unsigned32 (0..31) | RW | |
scalar · Unsigned32 (0..31) · read-write · current Defines the minimum gain by the AGC when activated [- db]. Range = 0 to -31. Access: Offline. AC INI-Param: AGCMINGAIN | ||||
| SacVoiceAGCMaxGain | 1.3.6.1.4.1.5003.9.10.4.1.2.2.6 | Unsigned32 (0..18) | RW | |
scalar · Unsigned32 (0..18) · read-write · current Defines the maximum gain by the AGC when activated [db]. Range = 0 to 18. Access: Offline. AC INI-Param: AGCMAXGAIN | ||||
| SacVoiceAGCDisableFastAdaptation | 1.3.6.1.4.1.5003.9.10.4.1.2.2.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current Disables the AGC Fast Adaptation mode. Enable = 1 Disable = 0. Access: Offline. AC INI-Param: AGCDISABLEFASTADAPTATION
| ||||
| NacVoiceEC | 1.3.6.1.4.1.5003.9.10.4.1.2.3 | |||
| SacVoiceECEnable | 1.3.6.1.4.1.5003.9.10.4.1.2.3.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enables or disables the Echo Canceller. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ENABLEECHOCANCELLER
| ||||
| SacVoiceECMaxLength | 1.3.6.1.4.1.5003.9.10.4.1.2.3.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Defines the maximum board EC (Echo Canceler) length capability. 0 = EC length determined internally to reach maximum channel capacity. 4 = 32 msec 11 = 64 msec 22 = 128 msec TP-1610 only: Using 64 or 128 msec reduces the channel capacity to 200 channels. . Access: Offline. AC INI-Param: MAXECHOCANCELLERLENGTH
| ||||
| SacVoiceECHybridLoss | 1.3.6.1.4.1.5003.9.10.4.1.2.3.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Sets the worst case ratio between the signal level transmitted to the hybrid and the echo level returning from hybrid. Set this per worst hybrid in the system in terms of echo return loss. Refer to the enumeration acTECHybridLoss. 0 = 6 dBm 2 = 0 dBm 3 = 3 dBm. Access: Online. AC INI-Param: ECHYBRIDLOSS
| ||||
| SacVoiceECToneDetector | 1.3.6.1.4.1.5003.9.10.4.1.2.3.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Used to configure the Echo Canceler Tone Detector. Detects a 2100 Hz tone at the input signal to the TDM (received signal). Improves Echo Canceler operation accordingly. Detects 2100, 2100 with phase reversals and 2100 with AM. Improves the operation of the Echo Canceler by slowing adaptation when the signal is detected. This data is also used by the fax state machine. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ECEnableToneDetector
| ||||
| SacVoiceECComfortNoiseGeneration | 1.3.6.1.4.1.5003.9.10.4.1.2.3.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current Use this parameter to enable or enable Echo Canceler Comfort Noise Generation, which generates comfort noise when the Non Linear Processor (NLP) is active. When the NLP ascertains that the signal is echo and not doubletalk and decides to clip, instead of transmitting silence it transmits a synthesized signal similar to the background noise. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ECEnableComfortNoiseGeneration
| ||||
| NacVoiceSC | 1.3.6.1.4.1.5003.9.10.4.1.2.4 | |||
| SacVoiceSCMode | 1.3.6.1.4.1.5003.9.10.4.1.2.4.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enables or disables Silence Suppression Mode. 0 = Disable = SILENCE_COMPRESION_DISABLE 1 = Enable = SILENCE_COMPRESION_ENABLE 2 = Enable without adaptation = SILENCE_COMPRESION_ENABLE_NOISE_ADAPTATION_DISABLE. Access: Online. AC INI-Param: ENABLESILENCECOMPRESSION
| ||||
| SacVoiceSCVBRCoderDTXMin | 1.3.6.1.4.1.5003.9.10.4.1.2.4.2 | Unsigned32 (0..20000) | RW | |
scalar · Unsigned32 (0..20000) · read-write · current Defines the minimum number of frames gap between two SID frames, when using the EVRC voice activity detector. . Access: Online. AC INI-Param: EVRCDTXMin | ||||
| SacVoiceSCVBRCoderDTXMax | 1.3.6.1.4.1.5003.9.10.4.1.2.4.3 | Unsigned32 (0..20000) | RW | |
scalar · Unsigned32 (0..20000) · read-write · current Defines the maximum number of frames gap between two SID frames, when using the EVRC voice activity detector. Access: Online. AC INI-Param: EVRCDTXMax | ||||
| SacVoiceSCVBRCoderHangover | 1.3.6.1.4.1.5003.9.10.4.1.2.4.4 | Unsigned32 (0..255) | RW | |
scalar · Unsigned32 (0..255) · read-write · current For indicating the desired number of silence frames at the beginning of each silence period, when using the VBR CODER silence suppression. . Access: Online. AC INI-Param: VBRCoderHangover | ||||
| NacMediaFaxModemConfig | 1.3.6.1.4.1.5003.9.10.4.1.3 | |||
| NacFaxModem | 1.3.6.1.4.1.5003.9.10.4.1.3.1 | |||
| NacFMCommon | 1.3.6.1.4.1.5003.9.10.4.1.3.1.1 | |||
| SacFMCommonRelayVolume | 1.3.6.1.4.1.5003.9.10.4.1.3.1.1.1 | Integer32 (-18..-3) | RW | |
scalar · Integer32 (-18..-3) · read-write · current Determines the fax gain control. The range -18 to -3 relates to -18.5 dBm to -3.5 dBm in steps of 1 dBm. Access: Online. AC INI-Param: FAXMODEMRELAYVOLUME | ||||
| SacFMCommonV34Transport | 1.3.6.1.4.1.5003.9.10.4.1.3.1.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Sets the V.34 modem transport method. 0 = Transparent 2 = Bypass 3 = Transparent with Events 4 = AnsMute. Access: Online. AC INI-Param: V34MODEMTRANSPORTTYPE
| ||||
| SacFMCommonEnableInbandNetworkDetection | 1.3.6.1.4.1.5003.9.10.4.1.3.1.1.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enables or disables inband network detection related to fax/modem. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: EnableFaxModemInbandNetworkDetection
| ||||
| SacFMCommonCEDTransferMode | 1.3.6.1.4.1.5003.9.10.4.1.3.1.1.4 | INTEGER | RW | obsolete |
scalar · INTEGER · read-write · obsolete 0 - transfer CED using T38. 1 - transfer CED over VBD(some Vxx=2) or VoIP(Vxx=0). 2 - transfer CED using RFC, and block CED over VBD/VoIP. 3 - transfer CED using RFC in parallel with CED over VBD/VoIP. Access: Instant. AC INI-Param: CEDTransferMode
| ||||
| NacFMBypass | 1.3.6.1.4.1.5003.9.10.4.1.3.1.2 | |||
| SacFMBypassCoderType | 1.3.6.1.4.1.5003.9.10.4.1.3.1.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Users can use this parameter to set the fax/modem bypass coder (according to acTCoders). 0 = G.711 A-Law 1 = G.711 Mu-Law. Access: Online. AC INI-Param: FAXMODEMBYPASSCODERTYPE
| ||||
| SacFMBypassPacketizationPeriod | 1.3.6.1.4.1.5003.9.10.4.1.3.1.2.2 | Unsigned32 (1..12) | RW | |
scalar · Unsigned32 (1..12) · read-write · current Defines the number of basic frames to generate one RTP fax/modem bypass packet. Access: Online. AC INI-Param: FAXMODEMBYPASSM | ||||
| SacFMBypassBasicPacketInterval | 1.3.6.1.4.1.5003.9.10.4.1.3.1.2.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Sets the basic Fax / Modem Bypass RTP packet rate. 0 = Default (set internally) (PACKET_INTERVAL_DEFAULT) 1 = 5 msec (PACKET_INTERVAL_5_MSEC) 2 = 10 msec (PACKET_INTERVAL_10_MSEC) 3 = 20 msec (PACKET_INTERVAL_20_MSEC). Access: Online. AC INI-Param: FAXMODEMBYPASSBASICRTPPACKETINTERVAL
| ||||
| SacFMBypassDJBufMinDelay | 1.3.6.1.4.1.5003.9.10.4.1.3.1.2.4 | Unsigned32 (0..150) | RW | |
scalar · Unsigned32 (0..150) · read-write · current Determines the Jitter Buffer constant delay (in milliseconds) during a Fax & Modem Bypass session. (The minimum Jitter Buffer Size). Range = 0 to 150. Access: Online. AC INI-Param: FAXMODEMBYPASDJBUFMINDELAY | ||||
| SacFMBypassFaxBypassOutputGain | 1.3.6.1.4.1.5003.9.10.4.1.3.1.2.5 | Integer32 (-31..31) | RW | |
scalar · Integer32 (-31..31) · read-write · current Defines the fax bypass output gain control. Range: -31 dB to +31 dB in 1 dB steps Default = 0 = No Gain. Access: Online. AC INI-Param: FaxBypassOutputGain | ||||
| SacFMBypassModemBypassOutputGain | 1.3.6.1.4.1.5003.9.10.4.1.3.1.2.6 | Integer32 (-31..31) | RW | |
scalar · Integer32 (-31..31) · read-write · current Defines the modem bypass output gain control. Range: -31 dB to +31 dB in 1 dB steps Default = 0 = No Gain. Access: Online. AC INI-Param: ModemBypassOutputGain | ||||
| NacFMNSE | 1.3.6.1.4.1.5003.9.10.4.1.3.1.3 | |||
| SacFMNSEPayloadType | 1.3.6.1.4.1.5003.9.10.4.1.3.1.3.1 | Unsigned32 (96..127) | RW | |
scalar · Unsigned32 (96..127) · read-write · current Users can use this parameter to modify the NSE packet's payload type. Range = 96 to 127. Access: Online. AC INI-Param: NSEPAYLOADTYPE | ||||
| SacFMNSEMode | 1.3.6.1.4.1.5003.9.10.4.1.3.1.3.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enables or disables Cisco's NSE fax / modem automatic pass-through mode. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: NSEMODE
| ||||
| NacFax | 1.3.6.1.4.1.5003.9.10.4.1.3.2 | |||
| SacFaxTransportMode | 1.3.6.1.4.1.5003.9.10.4.1.3.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Sets the Fax over IP transport method. 0 = Transparent 1 = Relay 2 = Bypass 3 = Transparent with Events. Access: Online. AC INI-Param: FAXTRANSPORTMODE
| ||||
| SacFaxBypassPayloadType | 1.3.6.1.4.1.5003.9.10.4.1.3.2.2 | Unsigned32 (0..127) | RW | |
scalar · Unsigned32 (0..127) · read-write · current Users can use this parameter to modify the Fax Bypass Mode RTP packet's payload type. In the case of congestion (if the selected payload type is already used for other coders/modes), then a TP_SETUP_PARAMETER_INVALID_ERROR is issued and the payload type is set to the default value (102). It is the user's responsibility to avoid congestion with other payload types. Range = 0 to 127. Access: Online. AC INI-Param: FAXBYPASSPAYLOADTYPE | ||||
| SacFaxRelayECMEnable | 1.3.6.1.4.1.5003.9.10.4.1.3.2.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enables or disables the using of ECM mode during Fax Relay. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: FAXRELAYECMENABLE
| ||||
| SacFaxRelayMaxRate | 1.3.6.1.4.1.5003.9.10.4.1.3.2.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Limits the maximum rate at which fax messages are transmitted. 0 = 2400 bps 1 = 4800 bps 2 = 7200 bps 3 = 9600 bps 4 = 12000 bps 5 = 14400 bps 6 = 16800 bps 7 = 19200 bps 8 = 21600 bps 9 = 24000 bps 10 = 26400 bps 11 = 28800 bps 12 = 31200 bps 13 = 33600 bps. Access: Online. AC INI-Param: FAXRELAYMAXRATE
| ||||
| SacFaxRelayRedundancyDepth | 1.3.6.1.4.1.5003.9.10.4.1.3.2.5 | Unsigned32 (0..2) | RW | |
scalar · Unsigned32 (0..2) · read-write · current Determines the depth of redundancy for fax packets. This parameter is applicable only to non-V.21 packets. 0 = No redundancy 1 = 1 packet redundancy 2 = 2 packet redundancy. Access: Online. AC INI-Param: FAXRELAYREDUNDANCYDEPTH | ||||
| SacFaxEnhancedRelayRedundancyDepth | 1.3.6.1.4.1.5003.9.10.4.1.3.2.6 | Unsigned32 (0..4) | RW | |
scalar · Unsigned32 (0..4) · read-write · current Determines the number of repetitions to be applied to control packets when using the T.38 standard. 0 = No redundancy 1 = 1 packet redundancy 2 = 2 packet redundancy 3 = 3 packet redundancy 4 = Maximum redundancy. Access: Online. AC INI-Param: FAXRELAYENHANCEDREDUNDANCYDEPTH | ||||
| SacFaxCNGDetectorMode | 1.3.6.1.4.1.5003.9.10.4.1.3.2.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current Determines the CNG Detector mode. 0 = Disable 1 = Relay 2 = Event Only. Access: Online. AC INI-Param: CNGDETECTORMODE
| ||||
| SacFaxV34TransportMethod | 1.3.6.1.4.1.5003.9.10.4.1.3.2.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Determines the V.34 fax transport method. One of the following values: 0 = Transparent 1 = Relay 2 = Bypass 3 = Transparent with Events. Access: Online. AC INI-Param: V34FAXTRANSPORTTYPE
| ||||
| SacFaxT38Version | 1.3.6.1.4.1.5003.9.10.4.1.3.2.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current T38 fax relay version. 0 = T.38 version 0 (from 06/1998) 3 = T.38 version 3 (V.34 over T.38 support) Default = 3. Access: Online. AC INI-Param: T38Version
| ||||
| SacFaxT38OverRTPMode | 1.3.6.1.4.1.5003.9.10.4.1.3.2.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current Sets the T38 over RTP mode. Access: Instant. AC INI-Param: T38OverRTPMode
| ||||
| SacFaxTxT38OverRTPPayloadType | 1.3.6.1.4.1.5003.9.10.4.1.3.2.11 | Unsigned32 (96..128) | RW | |
scalar · Unsigned32 (96..128) · read-write · current Transmitted T38 over RTP Payload type. Access: Instant. AC INI-Param: TxT38OverRTPPayloadType | ||||
| SacFaxRxT38OverRTPPayloadType | 1.3.6.1.4.1.5003.9.10.4.1.3.2.12 | Unsigned32 (96..128) | RW | |
scalar · Unsigned32 (96..128) · read-write · current Received T38 over RTP Payload type. Access: Instant. AC INI-Param: RxT38OverRTPPayloadType | ||||
| NacModem | 1.3.6.1.4.1.5003.9.10.4.1.3.3 | |||
| SacModemV22Transport | 1.3.6.1.4.1.5003.9.10.4.1.3.3.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Sets the V.22 modem transport method. 0 = Transparent 2 = Bypass 3 = Transparent with Events. Access: Online. AC INI-Param: V22MODEMTRANSPORTTYPE
| ||||
| SacModemV23Transport | 1.3.6.1.4.1.5003.9.10.4.1.3.3.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Sets the V.23 modem transport method. 0 = Transparent 2 = Bypass 3 = Transparent with Events. Access: Online. AC INI-Param: V23MODEMTRANSPORTTYPE
| ||||
| SacModemV32Transport | 1.3.6.1.4.1.5003.9.10.4.1.3.3.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Sets the V.32 modem transport method. 0 = Transparent 2 = Bypass 3 = Transparent with Events 4 = AnsMute. Access: Online. AC INI-Param: V32MODEMTRANSPORTTYPE
| ||||
| SacModemBypassPayloadType | 1.3.6.1.4.1.5003.9.10.4.1.3.3.4 | Unsigned32 (0..127) | RW | |
scalar · Unsigned32 (0..127) · read-write · current Users can use this parameter to modify the Modem Bypass Mode RTP packet's payload type. In the case of congestion (if the selected payload type is already used for other coders/modes), then a TP_SETUP_PARAMETER_INVALID_ERROR is issued and the payload type is set to the default value (103). It is the user's responsibility to avoid congestion with other payload types. Range = 0 to 127. Access: Online. AC INI-Param: MODEMBYPASSPAYLOADTYPE | ||||
| SacModemBellTransportType | 1.3.6.1.4.1.5003.9.10.4.1.3.3.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current Use this parameter to set the Bell modem transport method. 0 = Transparent 2 = Bypass (enum ByPassEnable) 3 = Transparent with Events (enum EventsOnly). Access: Online. AC INI-Param: BellModemTransportType
| ||||
| SacModemV21Transport | 1.3.6.1.4.1.5003.9.10.4.1.3.3.6 | INTEGER | RW | deprecated |
scalar · INTEGER · read-write · deprecated Sets the V.21 modem transport method (must be set to 0 = Disable). 0 = Transparent 2 = Bypass 3 = Transparent with Events. Access: Online. AC INI-Param: V21ModemTransportType
| ||||
| SacModemEnableV150ModemRelaySupport | 1.3.6.1.4.1.5003.9.10.4.1.3.3.7 | INTEGER | RW | obsolete |
scalar · INTEGER · read-write · obsolete Determines whether to enable V.150.1 modem relay support. Range: 0 - Disable 1 - Enable. Access: Offline. AC INI-Param: EnableV150ModemRelaySupport
| ||||
| NacV150dot1 | 1.3.6.1.4.1.5003.9.10.4.1.3.4 | |||
| SacV150dot1AllocationProfile | 1.3.6.1.4.1.5003.9.10.4.1.3.4.1 | Unsigned32 (0..20) | RW | |
scalar · Unsigned32 (0..20) · read-write · current Selects the V.150.1 profile, determining how many DSP channels have V.150.1 support. Range = 0 to 3. Access: Offline. AC INI-Param: V1501AllocationProfile | ||||
| SacV150dot1SSEPayloadTypeRx | 1.3.6.1.4.1.5003.9.10.4.1.3.4.2 | Unsigned32 (96..127) | RW | |
scalar · Unsigned32 (96..127) · read-write · current SSE payload type RX. Access: Online. AC INI-Param: V1501SSEPayloadTypeRx | ||||
| SacV150dot1SSEPayloadTypeTx | 1.3.6.1.4.1.5003.9.10.4.1.3.4.3 | Unsigned32 (96..127) | RW | |
scalar · Unsigned32 (96..127) · read-write · current SSE payload type TX. Access: Online. AC INI-Param: V1501SSEPayloadTypeTx | ||||
| SacV150dot1SSERedundancyDepth | 1.3.6.1.4.1.5003.9.10.4.1.3.4.4 | Unsigned32 (1..6) | RW | |
scalar · Unsigned32 (1..6) · read-write · current SSE is a part of V150.1 modem relay protocol and SSE messages are sent over RTP. SSE redundancy refers to the sending of SSE messages several times to increase reliability. This parameter determines the number of times each SSE message is to be resent. Access: Online. AC INI-Param: V1501SSERedundancyDepth | ||||
| SacV150dot1SPRTPayloadTypeRx | 1.3.6.1.4.1.5003.9.10.4.1.3.4.5 | Unsigned32 (96..127) | RW | |
scalar · Unsigned32 (96..127) · read-write · current SPRT payload type RX. Access: Online. AC INI-Param: V1501SPRTPayloadTypeRx | ||||
| SacV150dot1SPRTPayloadTypeTx | 1.3.6.1.4.1.5003.9.10.4.1.3.4.6 | Unsigned32 (96..127) | RW | |
scalar · Unsigned32 (96..127) · read-write · current SPRT payload type TX. Access: Online. AC INI-Param: V1501SPRTPayloadTypeTx | ||||
| SacV150dot1SPRTTransportChannel0MaxPayloadSize | 1.3.6.1.4.1.5003.9.10.4.1.3.4.7 | Unsigned32 (140..256) | RW | |
scalar · Unsigned32 (140..256) · read-write · current SPRT transport channel 0 max payload size. Access: Online. AC INI-Param: V1501SPRTTransportChannel0MaxPayloadSize | ||||
| SacV150dot1SPRTTransportChannel2MaxPayloadSize | 1.3.6.1.4.1.5003.9.10.4.1.3.4.8 | Unsigned32 (132..256) | RW | |
scalar · Unsigned32 (132..256) · read-write · current SPRT transport channel 2 max payload size. Access: Online. AC INI-Param: V1501SPRTTransportChannel2MaxPayloadSize | ||||
| SacV150dot1SPRTTransportChannel2MaxWindowSize | 1.3.6.1.4.1.5003.9.10.4.1.3.4.9 | Unsigned32 (8..32) | RW | |
scalar · Unsigned32 (8..32) · read-write · current SPRT transport channel 2 max window size. Access: Online. AC INI-Param: V1501SPRTTransportChannel2MaxWindowSize | ||||
| SacV150dot1SPRTTransportChannel3MaxPayloadSize | 1.3.6.1.4.1.5003.9.10.4.1.3.4.10 | Unsigned32 (140..256) | RW | |
scalar · Unsigned32 (140..256) · read-write · current SPRT transport channel 3 max payload size. Access: Online. AC INI-Param: V1501SPRTTransportChannel3MaxPayloadSize | ||||
| NacMediaRtpRtcpConfig | 1.3.6.1.4.1.5003.9.10.4.1.4 | |||
| NacRtpRtcp | 1.3.6.1.4.1.5003.9.10.4.1.4.1 | |||
| SacRtpRtcpBrokenConnectionEventTimeout | 1.3.6.1.4.1.5003.9.10.4.1.4.1.1 | Unsigned32 (3..2684354) | RW | |
scalar · Unsigned32 (3..2684354) · read-write · current Determines for how long the RTP connection should be broken before the Broken Connection event is issued. In units of 100 msec. . Access: Online. AC INI-Param: BROKENCONNECTIONEVENTTIMEOUT | ||||
| SacRtpRtcpBrokenConnectionEventActivationMode | 1.3.6.1.4.1.5003.9.10.4.1.4.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Determines if the broken connection mechanism is activated when the RTP stream is activated or when the first RTP packet is received. 0 = After First incoming packet (default) 1 = Upon channel's RTP activation. . Access: Online. AC INI-Param: BROKENCONNECTIONEVENTACTIVATIONMODE
| ||||
| SacRtpRtcpBasicRTPPacketInterval | 1.3.6.1.4.1.5003.9.10.4.1.4.1.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Selects the RTP packet rate for sample based coders (such as G.711, G.726, G.727). Also applicable for G.729, G.729E & G.728. 0 = Default (set internally) 1 = 5 msec 2 = 10 msec 3 = 20 msec. Access: Online. AC INI-Param: BASICRTPPACKETINTERVAL
| ||||
| SacRtpRtcpConnectionEstablishNotificationMode | 1.3.6.1.4.1.5003.9.10.4.1.4.1.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Determines the notification mode for the RTP connection establishment event acEV_CONNECTION_ESTABLISHED. 0 = Notify only after a broken connection event 1 = Also notify when the first RTP packet is received. Access: Online. AC INI-Param: CONNECTIONESTABLISHEMENTNOTIFICATIONMODE
| ||||
| SacRtpRtcpEnableMediaUDPChecksum | 1.3.6.1.4.1.5003.9.10.4.1.4.1.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current Determines whether to enable the UDP checksum calculation for RTP media TX over IPv4. One of the following possible values: 0 = Disable (No checksum: UDP checksum for IPv4 TX = 0) 1 = Enable (UDP checksum will be in the UDP header upon IPv4 TX) . Access: Offline. AC INI-Param: EnableMediaUDPChecksum
| ||||
| NacRtp | 1.3.6.1.4.1.5003.9.10.4.1.4.2 | |||
| SacRtpBaseUDPPort | 1.3.6.1.4.1.5003.9.10.4.1.4.2.1 | Unsigned32 (1024..65535) | RW | |
scalar · Unsigned32 (1024..65535) · read-write · current Defines the lower boundary of UDP ports to be used by the board. The upper boundary is calculated on the basis of BoardBaseUDPPort + 10 * (Number of Channels). This parameter value must be a multiple of 10. . Access: Offline. AC INI-Param: BASEUDPPORT | ||||
| SacRtpComfortNoiseEnable | 1.3.6.1.4.1.5003.9.10.4.1.4.2.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current When set to 1 (Enable), SID packets are sent with the RTP SID type (RFC 3389). 0 = Disable 1 = Enable Determines whether Silence Indicator (SID) packets that are sent and received are according to RFC 3389. 0 = Disabled (default). 1 = Enabled. Note: Applicable only to MP-11x and Mediant 1000. . Access: Online. AC INI-Param: ENABLESTANDARDSIDPAYLOADTYPE
| ||||
| SacRtpEnableRFC2658Interleaving | 1.3.6.1.4.1.5003.9.10.4.1.4.2.3 | INTEGER | RW | obsolete |
scalar · INTEGER · read-write · obsolete When enabled, RTP packets include an interleaving byte for VBR coders. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ENABLERFC2658INTERLEAVING
| ||||
| SacRtpRxTxMode | 1.3.6.1.4.1.5003.9.10.4.1.4.2.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Selects which RTP directions are enabled. Both Tx and Rx sides can be disabled. 0 = RTPTxRx 1 = RTPTxOnly 2 = RTPRxOnly 3 = RTPUnactive 4 = RTPRxRFC2833Tx. Access: Online. AC INI-Param: RTPDIRECTIONCONTROL
| ||||
| SacRtpRFC2833TxPayloadType | 1.3.6.1.4.1.5003.9.10.4.1.4.2.5 | Unsigned32 (96..127) | RW | |
scalar · Unsigned32 (96..127) · read-write · current Controls the RFC 2833 Tx Relay RTP Payload type. Range = 96 to 127. Access: Online. AC INI-Param: RFC2833TXPAYLOADTYPE | ||||
| SacRtpRFC2833RxPayloadType | 1.3.6.1.4.1.5003.9.10.4.1.4.2.6 | Unsigned32 (96..127) | RW | |
scalar · Unsigned32 (96..127) · read-write · current Controls the RFC 2833 Rx Relay RTP Payload type. Range = 96 to 127. Access: Online. AC INI-Param: RFC2833RXPAYLOADTYPE | ||||
| SacRtpRedundancyPayloadType | 1.3.6.1.4.1.5003.9.10.4.1.4.2.7 | Unsigned32 (96..127) | RW | |
scalar · Unsigned32 (96..127) · read-write · current This parameter sets the RFC 2198 (RTP Redundancy) packet's parameter 'RTP Payload Type'. Range: 96 to 127. Access: Online. AC INI-Param: RFC2198PAYLOADTYPE | ||||
| SacRtpRedundancyDepth | 1.3.6.1.4.1.5003.9.10.4.1.4.2.8 | Unsigned32 (0..5) | RW | |
scalar · Unsigned32 (0..5) · read-write · current Redundancy depth of RFC 2198 redundancy packets. 0 = Disabled In Gen 3 boards: range is 0-5 For other Gens 0-1. Access: Online. AC INI-Param: RTPREDUNDANCYDEPTH | ||||
| SacRtpPacketizationFactor | 1.3.6.1.4.1.5003.9.10.4.1.4.2.9 | Unsigned32 (1..12) | RW | |
scalar · Unsigned32 (1..12) · read-write · current Defines the number of DSP payloads for generating one RTP packet. Range = Hardware dependent. Access: Online. AC INI-Param: RTPPACKINGFACTOR | ||||
| SacRtpNoOpPayloadType | 1.3.6.1.4.1.5003.9.10.4.1.4.2.10 | Unsigned32 (96..127) | RW | |
scalar · Unsigned32 (96..127) · read-write · current User can modify the Noop packets RTP Payload type by setting this parameter. Range = 96 to 127. Access: Online. AC INI-Param: RTPNOOPPAYLOADTYPE | ||||
| SacRtpNoOpEnable | 1.3.6.1.4.1.5003.9.10.4.1.4.2.11 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enables / disable Noop packets sending mode. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: NoOpEnable
| ||||
| SacRtpNoOpInterval | 1.3.6.1.4.1.5003.9.10.4.1.4.2.12 | Unsigned32 (20..600000) | RW | |
scalar · Unsigned32 (20..600000) · read-write · current Used to modify the Noop packets sending interval Parameter value is in milliseconds Default value = 10 sec (10000 msec) Range = 20 to 600000 (20 msec to 10 min - 10 min = 600000). Access: Online. AC INI-Param: NoOpInterval | ||||
| SacRtpVBRCoderHeaderFormat | 1.3.6.1.4.1.5003.9.10.4.1.4.2.13 | INTEGER | RW | |
scalar · INTEGER · read-write · current 0 - payload only (no header, no toc, no m-factor) 1- support RFC 2658 format, 1 byte for interleaving header (always 0) and toc, no m-factor 2 - payload including toc only, allow m-factor 3- RFC 3358 format . Access: Online. AC INI-Param: VBRCoderHeaderFormat
| ||||
| SacRtpAMRCoderHeaderFormat | 1.3.6.1.4.1.5003.9.10.4.1.4.2.14 | INTEGER | RW | |
scalar · INTEGER · read-write · current AMR_CODER_HEADER_DEFAULT_FORMAT=0 - old m factor, each frame contains CRM byte and toc RFC_3267_BUNDLING=1 - single CRM byte followed by toc tables RFC_3267_INTERLEAVING=2 - supported as receivers only. Access: Online. AC INI-Param: AMRCODERHEADERFORMAT
| ||||
| SacRtpAMRFECRedundancyDepth | 1.3.6.1.4.1.5003.9.10.4.1.4.2.15 | INTEGER | RW | |
scalar · INTEGER · read-write · current Sets the AMR / WB-AMR Redundancy depth according to RFC 3267. 0 = No Redundancy 1 = Redundancy depth of a single packet 2 = Redundancy depth of 2 packets 3 = Redundancy depth of 3 packets . Access: Online. AC INI-Param: AMRFECREDUNDANCYDEPTH
| ||||
| SacRtpAMRFECNumOfMngtPolicyEntries | 1.3.6.1.4.1.5003.9.10.4.1.4.2.16 | Unsigned32 (0..9) | RW | |
scalar · Unsigned32 (0..9) · read-write · current Sets the number of entries to be defined at the AMR management policy table. Each entry defines the policy of a different rate. Access: Online. AC INI-Param: AMRFECNUMBEROFCODECMODES | ||||
| SacRtpAMRFECDelayHysteresis | 1.3.6.1.4.1.5003.9.10.4.1.4.2.17 | Unsigned32 (0..255) | RW | |
scalar · Unsigned32 (0..255) · read-write · current Defines the hysteresis of the Delay Threshold for AMR Hand-out events (in msec). Access: Online. AC INI-Param: AMRFECDELAYHYSTERESIS | ||||
| SacRtpAMRFECDelayThreshold | 1.3.6.1.4.1.5003.9.10.4.1.4.2.18 | Unsigned32 (0..255) | RW | |
scalar · Unsigned32 (0..255) · read-write · current Defines the one-way delay value (in msec) that may cause the AMR Hand Out report. 0 = 'Hand Out' report is disabled (default). Access: Online. AC INI-Param: AMRFECDELAYTHRESHHOLD | ||||
| SacRtpQcelpCoderHeaderFormat | 1.3.6.1.4.1.5003.9.10.4.1.4.2.19 | INTEGER | RW | |
scalar · INTEGER · read-write · current Determines whether to define a separate header format for the
QCELP coder (different to the header format of EVRC coder).
One of the following values:
-1 - QCELP coder uses the same header format as EVRC
coder,
according to VBRCoderHeaderFormat parameter.
1 to 2 - QCELP coder uses the value defined by this parameter
to
define its header format.
This parameter is relevant only for Control Protocol users.
TPNCP and PCI users should always use -1 value.
Access: Instant.
AC INI-Param: QcelpCoderHeaderFormat
| ||||
| SacRtpAMROctetAlignedEnable | 1.3.6.1.4.1.5003.9.10.4.1.4.2.20 | INTEGER | RW | |
scalar · INTEGER · read-write · current 0 = disable the AMR Octet Aligned mode. 1 = enable the AMR Octet Aligned mode. Access: Online. AC INI-Param: AmrOctetAlignedEnable
| ||||
| NacAMRFECCodecPolicies | 1.3.6.1.4.1.5003.9.10.4.1.4.2.21 | |||
| TacAMRFECCodecPoliciesTable | 1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1 | NA | ||
| RacAMRFECCodecPoliciesEntry | 1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1.1 | NA | ||
row · not-accessible · current | ||||
| CacAMRFECCodecPoliciesIndex | 1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1.1.1 | Unsigned32 (0..7) | NA | |
column · Unsigned32 (0..7) · not-accessible · current AC INI-Param: AMRFECCodecPolicies_Index | ||||
| CacAMRFECCodecPoliciesRowStatus | 1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current AC INI-Param: N/A | ||||
| CacAMRFECCodecPoliciesRate | 1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1.1.3 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current AMR Rate x of policy x (values 0-8). Access: Online. AC INI-Param: AMRFECCodecPolicies_Rate | ||||
| CacAMRFECCodecPoliciesRedundancyLevel | 1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1.1.4 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current Redundancy Level for policy x. Same values as 'RFC 3267 Redundancy' field. Access: Online. AC INI-Param: AMRFECCodecPolicies_RedundancyLevel | ||||
| CacAMRFECCodecPoliciesThreshold | 1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1.1.5 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current FLR (Frame Loss Ratio) threshold of policy 1. Values are taken from 3GPP TS 44.318 (0-63). Access: Online. AC INI-Param: AMRFECCodecPolicies_Threshold | ||||
| CacAMRFECCodecPoliciesHysteresis | 1.3.6.1.4.1.5003.9.10.4.1.4.2.21.1.1.6 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current Hysteresis of FLR threshold for policy 1. Values are taken from 3GPP TS 44.318. (0-15). Access: Online. AC INI-Param: AMRFECCodecPolicies_Hysteresis | ||||
| NacRtcp | 1.3.6.1.4.1.5003.9.10.4.1.4.3 | |||
| SacRtcpDisableIntervalRandomization | 1.3.6.1.4.1.5003.9.10.4.1.4.3.1 | Unsigned32 (0..1) | RW | |
scalar · Unsigned32 (0..1) · read-write · current Controls whether RTCP report intervals are randomized or whether each report interval accords exactly to the parameter defining RTCP Mean Tx Interval (in milliseconds). 0 = Randomize 1 = Don't Randomize. Access: Online. AC INI-Param: DISABLERTCPRANDOMIZE | ||||
| NacRtcpXr | 1.3.6.1.4.1.5003.9.10.4.1.4.4 | |||
| SacRtcpXrBurstThreshold | 1.3.6.1.4.1.5003.9.10.4.1.4.4.1 | Integer32 (-1..12) | RW | |
scalar · Integer32 (-1..12) · read-write · current voice quality monitoring - excessive burst alert threshold. if set to -1, no alerts will be issued. Access: Online. AC INI-Param: VQMONBURSTHR | ||||
| SacRtcpXrDelayThreshold | 1.3.6.1.4.1.5003.9.10.4.1.4.4.2 | Integer32 (-1..12) | RW | |
scalar · Integer32 (-1..12) · read-write · current voice quality monitoring - excessive delay alert threshold. if set to -1, no alerts will be issued. Access: Online. AC INI-Param: VQMONDELAYTHR | ||||
| SacRtcpXrEndOofCallRvalDelayThreshold | 1.3.6.1.4.1.5003.9.10.4.1.4.4.3 | Integer32 (-1..12) | RW | |
scalar · Integer32 (-1..12) · read-write · current voice quality monitoring - end of call low quality alert threshold. if set to -1, no alerts will be issued. Access: Online. AC INI-Param: VQMONEOCRVALTHR | ||||
| SacRtcpXrGMin | 1.3.6.1.4.1.5003.9.10.4.1.4.4.4 | Unsigned32 (0..255) | RW | |
scalar · Unsigned32 (0..255) · read-write · current voice quality monitoring - minimum gap size (number of frames). Access: Online. AC INI-Param: VQMONGMIN | ||||
| SacRtcpXrEnable | 1.3.6.1.4.1.5003.9.10.4.1.4.4.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current Sets voice quality monitoring (RTCP-XR) mode. 0 = Disable 1 = Enable all 2 = Enable Only Calculation. Access: Offline. AC INI-Param: VQMONENABLE
| ||||
| NacVideoRtpRtcp | 1.3.6.1.4.1.5003.9.10.4.1.4.5 | |||
| SacVideoRtpRtcpDisableRtcpIntervalRandomization | 1.3.6.1.4.1.5003.9.10.4.1.4.5.1 | INTEGER | RW | obsolete |
scalar · INTEGER · read-write · obsolete Determines whether to enable RTCP Interval Randomization. One of the following values: 0 Enable RTCP Interval Randomization 1 Disable RTCP Interval Randomization . Access: Online. AC INI-Param: VideoDisableRtcpIntervalRandomization
| ||||
| SacVideoRtpRtcpMeanTxInterval | 1.3.6.1.4.1.5003.9.10.4.1.4.5.2 | Unsigned32 (0..65535) | RW | obsolete |
scalar · Unsigned32 (0..65535) · read-write · obsolete Defines the mean interval between two transmitted RTCP packets (milliseconds). If the interval is set to 0, no RTCP packets are transmitted at all. Access: Online. AC INI-Param: VideoRtcpMeanTxInterval | ||||
| SacVideoRtpRtcpBrokenConnectionActivationMode | 1.3.6.1.4.1.5003.9.10.4.1.4.5.3 | INTEGER | RW | obsolete |
scalar · INTEGER · read-write · obsolete Broken connection event activation mode. 0 - Activate broken connection after the arrival of the first RTP packet. 1 - Activate broken connection immediately after the Activate RTP command. . Access: Online. AC INI-Param: VideoBrokenConnectionActivationMode
| ||||
| SacVideoRtpRtcpBrokenConnectionEventTimeout | 1.3.6.1.4.1.5003.9.10.4.1.4.5.4 | Unsigned32 (0..65535) | RW | obsolete |
scalar · Unsigned32 (0..65535) · read-write · obsolete Timeout that defines when broken connection event occurs. Time resolution is 20msec. Access: Online. AC INI-Param: VideoBrokenConnectionEventTimeout | ||||
| NacRTPExtension | 1.3.6.1.4.1.5003.9.10.4.1.4.6 | |||
| SacRTPExtensionFWNonConfiguredPTHandling | 1.3.6.1.4.1.5003.9.10.4.1.4.6.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Determines the way a packet with non-configured payload type should be handled. Access: Online. AC INI-Param: RtpFWNonConfiguredPTHandling
| ||||
| SacRTPExtensionFWInvalidPacketHandling | 1.3.6.1.4.1.5003.9.10.4.1.4.6.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Determines the way an invalid packet should be handled. Access: Online. AC INI-Param: RTPFWInvalidPacketHandling
| ||||
| SacRTPExtensionEnableFEC | 1.3.6.1.4.1.5003.9.10.4.1.4.6.3 | INTEGER | RW | obsolete |
scalar · INTEGER · read-write · obsolete Enables FEC (Forward Error Correction) support. Access: Online. AC INI-Param: EnableFEC
| ||||
| NacMediaIBSConfig | 1.3.6.1.4.1.5003.9.10.4.1.5 | |||
| NacIBS | 1.3.6.1.4.1.5003.9.10.4.1.5.1 | |||
| SacIBSAnalogSignalTransportType | 1.3.6.1.4.1.5003.9.10.4.1.5.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Determines the analog signal transport type. 0 = Ignore 1 = Transfer hookflash via RFC 2833. Access: Online. AC INI-Param: ANALOGSIGNALTRANSPORTTYPE
| ||||
| SacIBSDTMFVolume | 1.3.6.1.4.1.5003.9.10.4.1.5.1.2 | Integer32 (-31..0) | RW | |
scalar · Integer32 (-31..0) · read-write · current Defines and controls the DTMF generation volume [-dBm]. Range = -31 to 0. Access: Online. AC INI-Param: DTMFVOLUME | ||||
| SacIBSDTMFTransportType | 1.3.6.1.4.1.5003.9.10.4.1.5.1.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Defines the type of DTMF transport. 0 = Erase DTMFs from voice transport not relayed to remote 2 = DTMFs not erased are not relayed to remote 3 = DTMFs are muted from the voice stream and relayed according to RFC 2833 7 = DTMFs are sent according to RFC 2833 and muted when received. Access: Online. AC INI-Param: DTMFTRANSPORTTYPE
| ||||
| SacIBSMFTransportType | 1.3.6.1.4.1.5003.9.10.4.1.5.1.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Defines the type of MF transport. 0 = Erase MFs from voice transport not relayed to remote 2 = MFs not erased are not relayed to remote 3 = MFs are muted from the voice stream and relayed according to RFC 2833. Access: Online. AC INI-Param: MFTRANSPORTTYPE
| ||||
| SacIBSTrunkTestingTonesEnable | 1.3.6.1.4.1.5003.9.10.4.1.5.1.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enables or disables trunk testing tones. 0 = Disables trunk testing tones 1 = Enables trunk testing tones. Access: Offline. AC INI-Param: ENABLETRUNKTESTINGTONES
| ||||
| SacIBSCASRelayTransportMode | 1.3.6.1.4.1.5003.9.10.4.1.5.1.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Controls the ABCD signaling transport type over IP. 0 = No Relay over the network 1 = Enable CAS relay according to RFC 2833. Access: Online. AC INI-Param: CASTRANSPORTTYPE
| ||||
| SacIBSRxDtmfHangOverTime | 1.3.6.1.4.1.5003.9.10.4.1.5.1.7 | Unsigned32 (0..2000) | RW | |
scalar · Unsigned32 (0..2000) · read-write · current Used to configure the Voice Silence time (in ms units) after playing DTMF or MF digits to the TDM side that arrived as Relay from the Network side. Range from 0 to 2000, Default 1000. Access: Online. AC INI-Param: RxDtmfHangOverTime | ||||
| SacIBSTxDtmfHangOverTime | 1.3.6.1.4.1.5003.9.10.4.1.5.1.8 | Unsigned32 (0..2000) | RW | |
scalar · Unsigned32 (0..2000) · read-write · current Voice Silence time (in ms units) after detecting the end of DTMF or MF digits at the TDM side when the DTMF Transport Type is either Relay or Mute.This feature allows the user to configure the silence time. . Access: Online. AC INI-Param: TxDtmfHangOverTime | ||||
| SacIBSDTMFTwistControl | 1.3.6.1.4.1.5003.9.10.4.1.5.1.9 | Integer32 (-10..10) | RW | |
scalar · Integer32 (-10..10) · read-write · current Defines a delta (in dB) between the high and low frequency component in the DTMF signal. dB Positive values cause the higher frequency component to be stronger than the lower one. Negative values cause the opposite effect. For any parameter value, both components change so that their average is constant. Range = -10 to 10. Access: Offline. AC INI-Param: DTMFGenerationTwist | ||||
| SacIBSNTEMaxDuration | 1.3.6.1.4.1.5003.9.10.4.1.5.1.10 | Integer32 (-1..200000000) | RW | |
scalar · Integer32 (-1..200000000) · read-write · current Maximal time for sending NTEs (Named Telephony Events) to the network, regardless of the time range when the TDM signal is detected. -1= NTE will stop only upon detection of End event (default). Access: Online. AC INI-Param: NTEMaxDuration | ||||
| NacIBSDetectors | 1.3.6.1.4.1.5003.9.10.4.1.5.2 | |||
| SacIBSDetectorsMFR1Enable | 1.3.6.1.4.1.5003.9.10.4.1.5.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enables or disables detection of MFR1 signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: MFR1DETECTORENABLE
| ||||
| SacIBSDetectorsMFR2ForwardEnable | 1.3.6.1.4.1.5003.9.10.4.1.5.2.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enables or disables detection of MFR2 forward signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: MFR2FORWARDDETECTORENABLE
| ||||
| SacIBSDetectorsMFR2BackwardEnable | 1.3.6.1.4.1.5003.9.10.4.1.5.2.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enables or disables detection of MFR2 backward signaling. Access: Online. AC INI-Param: MFR2BACKWARDDETECTORENABLE
| ||||
| SacIBSDetectorsR1LineEnable | 1.3.6.1.4.1.5003.9.10.4.1.5.2.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enables or disables detection of Line signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: R1LINEDETECTORENABLE
| ||||
| SacIBSDetectorsR2LineEnable | 1.3.6.1.4.1.5003.9.10.4.1.5.2.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enables or disables detection of Line signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: R2LINEDETECTORENABLE
| ||||
| SacIBSDetectorsAC15Enable | 1.3.6.1.4.1.5003.9.10.4.1.5.2.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enables or disables detection of Line signaling. Access: Online. AC INI-Param: AC15DETECTORENABLE
| ||||
| SacIBSDetectorsDTMFEnable | 1.3.6.1.4.1.5003.9.10.4.1.5.2.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enables or disables detection of DTMF signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: DTMFDETECTORENABLE
| ||||
| SacIBSDetectorsCallProgressEnable | 1.3.6.1.4.1.5003.9.10.4.1.5.2.8 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enables or disables detection of Call Progress Tones. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: CALLPROGRESSDETECTORENABLE
| ||||
| SacIBSDetectorsUserDefinedToneEnable | 1.3.6.1.4.1.5003.9.10.4.1.5.2.9 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enables or disables detection of User Defined Tones signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: USERDEFINEDTONEDETECTORENABLE
| ||||
| SacIBSDetectorsDetectionRedirection | 1.3.6.1.4.1.5003.9.10.4.1.5.2.10 | INTEGER | RW | |
scalar · INTEGER · read-write · current Determines the IBS (In-Band Signaling) Detection Direction. 0 = PCM 1 = Network. Access: Online. AC INI-Param: IBSDETECTIONREDIRECTION
| ||||
| SacIBSDetectorsSS4Enable | 1.3.6.1.4.1.5003.9.10.4.1.5.2.11 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enables or disables detection of Line signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: SS4DETECTORENABLE
| ||||
| SacIBSDetectorsMFSS5Enable | 1.3.6.1.4.1.5003.9.10.4.1.5.2.12 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enables or disables detection of MF SS5 line signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: MFSS5DETECTORENABLE
| ||||
| SacIBSDetectorsSS5Enable | 1.3.6.1.4.1.5003.9.10.4.1.5.2.13 | INTEGER | RW | |
scalar · INTEGER · read-write · current Detection of Line signaling. 0 = Disable 1 = Enable. Access: Online. AC INI-Param: SS5DETECTORENABLE
| ||||
| SacIBSDetectorsSITEnable | 1.3.6.1.4.1.5003.9.10.4.1.5.2.14 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enables or disables SIT (Special Information Tone) detection according to the ITU-T recommendation E.180/Q.35. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: SITDETECTORENABLE
| ||||
| SacIBSDetectorsCOTEnable | 1.3.6.1.4.1.5003.9.10.4.1.5.2.15 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enables or disables Continuity Test tone detection and generation according to the ITU-T Q.724 recommendation. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: ENABLECONTINUITYTONES
| ||||
| SacIBSDetectorsR1DetectionStandard | 1.3.6.1.4.1.5003.9.10.4.1.5.2.16 | INTEGER | RW | |
scalar · INTEGER · read-write · current This parameter determines which one of the R1 MF protocol flavors will be used for detection. 0 = ITU 1 = R1.5. Access: Offline. AC INI-Param: R1DetectionStandard
| ||||
| SacIBSDetectorsUDTDetectorFrequencyDeviation | 1.3.6.1.4.1.5003.9.10.4.1.5.2.17 | Unsigned32 (1..50) | RW | |
scalar · Unsigned32 (1..50) · read-write · current Defines the deviation allowed for the detection of each signal frequency. Units are in Hertz. Valid values range 1-50. Default value 50 Hz. . Access: Offline. AC INI-Param: UDTDETECTORFREQUENCYDEVIATION | ||||
| SacIBSDetectorsCPTDetectorFrequencyDeviation | 1.3.6.1.4.1.5003.9.10.4.1.5.2.18 | Unsigned32 (1..30) | RW | |
scalar · Unsigned32 (1..30) · read-write · current Defines the deviation allowed for the detection of each CPT signal frequency. Units are in Hertz. Valid values range 1-30. Default value 10 Hz. . Access: Offline. AC INI-Param: CPTDETECTORFREQUENCYDEVIATION | ||||
| NacIPMediaConfig | 1.3.6.1.4.1.5003.9.10.4.1.6 | |||
| NacIPMedia | 1.3.6.1.4.1.5003.9.10.4.1.6.1 | |||
| SacIPMediaDSPDetectorsEnable | 1.3.6.1.4.1.5003.9.10.4.1.6.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enables or disables DSP IP Media Detectors. Enabling this parameter might reduce the board channel capacity. 0 = Disable 1 = Enable. Access: Offline. AC INI-Param: ENABLEDSPIPMDETECTORS
| ||||
| SacIPMediaEnableMCApplication | 1.3.6.1.4.1.5003.9.10.4.1.6.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enables media control functionality. Access: Offline. AC INI-Param: ENABLEMEDIACONTROL
| ||||
| NacIPMAnswerDetector | 1.3.6.1.4.1.5003.9.10.4.1.6.2 | |||
| SacIPMAnswerDetectorEnable | 1.3.6.1.4.1.5003.9.10.4.1.6.2.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enables or disables activation of the AD (Answer Detector). 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ENABLEANSWERDETECTOR
| ||||
| SacIPMAnswerDetectorActivityDelay | 1.3.6.1.4.1.5003.9.10.4.1.6.2.2 | Unsigned32 (0..128) | RW | |
scalar · Unsigned32 (0..128) · read-write · current Controls (in 100 msec resolution) the time between sending Activation command (AnswerDetector = 1) and the time that the detector actually starts to work. Range = 0 to 0x3FF. Access: Online. AC INI-Param: ANSWERDETECTORACTIVITYDELAY | ||||
| SacIPMAnswerDetectorSilenceTime | 1.3.6.1.4.1.5003.9.10.4.1.6.2.3 | Unsigned32 (0..128) | RW | |
scalar · Unsigned32 (0..128) · read-write · current This parameter controls the silence time period (in 100 msec resolution) from no speech input until the END_OF_SPEECH event is sent. 10 = 1 second Range = 0 to 0x3FF. Access: Online. AC INI-Param: ANSWERDETECTORSILENCETIME | ||||
| SacIPMAnswerDetectorRedirection | 1.3.6.1.4.1.5003.9.10.4.1.6.2.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Determines the AD (Answer Detector) Redirection. 0 (PCM) = Speech from the PCM side is detected 1 (Network) = Speech from the IP side is detected. Access: Online. AC INI-Param: ANSWERDETECTORREDIRECTION
| ||||
| SacIPMAnswerDetectorSensitivity | 1.3.6.1.4.1.5003.9.10.4.1.6.2.5 | Unsigned32 (0..7) | RW | |
scalar · Unsigned32 (0..7) · read-write · current Controls the AD (Answer Detector) sensitivity. The allowed values are different for different boards: DSP Gen2-based products: range 0 - 2, default 0. DSP Gen2-based products: range 0 - 7, default 3. Lowest value matches highest sensitivity and vice versa. Access: Online. AC INI-Param: ANSWERDETECTORSENSITIVITY | ||||
| NacIPMEnergyDetector | 1.3.6.1.4.1.5003.9.10.4.1.6.3 | |||
| SacIPMEnergyDetectorEnable | 1.3.6.1.4.1.5003.9.10.4.1.6.3.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Activates the ED (Energy Detector). 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ENABLEENERGYDETECTOR
| ||||
| SacIPMEnergyDetectorQualityFactor | 1.3.6.1.4.1.5003.9.10.4.1.6.3.2 | Unsigned32 (0..10) | RW | |
scalar · Unsigned32 (0..10) · read-write · current Determines the ED's (Energy Detector's) sensitivity (0 -10). 0 = Insensitive 10 = Most Sensitive Range = 0 to 10. Access: Online. AC INI-Param: ENERGYDETECTORQUALITYFACTOR | ||||
| SacIPMEnergyDetectorThreshold | 1.3.6.1.4.1.5003.9.10.4.1.6.3.3 | Unsigned32 (0..7) | RW | |
scalar · Unsigned32 (0..7) · read-write · current Defines the ED's (Energy Detector's) threshold. A signal exceeding the threshold invokes an 'Above' or 'Below' event. ActualThreshold = -44 dBm + (EDThreshold * 6) Default = 3 = -26 dBm Range: 0 to 7. Access: Online. AC INI-Param: ENERGYDETECTORTHRESHOLD | ||||
| SacIPMEnergyDetectorEnergyRedirection | 1.3.6.1.4.1.5003.9.10.4.1.6.3.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Selects the direction of the energy detection. 0 = Detect from the TDM side 1 = Detect from the network side. Access: Online. AC INI-Param: ENERGYDETECTORREDIRECTION
| ||||
| NacIPMediaPatternDetector | 1.3.6.1.4.1.5003.9.10.4.1.6.4 | |||
| SacIPMediaPatternDetectorEnable | 1.3.6.1.4.1.5003.9.10.4.1.6.4.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enables or disables activation of the PD (Pattern Detector). 0 = Disable 1 = Enable. Access: Online. AC INI-Param: ENABLEPATTERNDETECTOR
| ||||
| SacIPMediaPatternDetectorDetectionThreshold | 1.3.6.1.4.1.5003.9.10.4.1.6.4.2 | Unsigned32 (0..31) | RW | |
scalar · Unsigned32 (0..31) · read-write · current Defines the number of consecutive patterns to trigger the pattern detection event. Range = 0 to 31. Access: Offline. AC INI-Param: PDTHRESHOLD | ||||
| NacIPMediaAMD | 1.3.6.1.4.1.5003.9.10.4.1.6.5 | |||
| SacIPMediaAMDDetectionDirection | 1.3.6.1.4.1.5003.9.10.4.1.6.5.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Determines the AMD (Answer Machine Detector) detection direction. One of the following values: 0 = Detection from the TDM side 1 = Detection from the Network side. Access: Online. AC INI-Param: AMDDETECTIONDIRECTION
| ||||
| SacIPMediaAMDSensitivity | 1.3.6.1.4.1.5003.9.10.4.1.6.5.2 | Unsigned32 (0..7) | RW | |
scalar · Unsigned32 (0..7) · read-write · current Determines the AMD (Answer Machine Detector) detection sensitivity: 0 = Best detection of an answering machine 7 = Best detection of a live call. Access: Online. AC INI-Param: AMDDetectionSensitivity | ||||
| SacIPMediaAMDDetectionSensitivityHighResolution | 1.3.6.1.4.1.5003.9.10.4.1.6.5.3 | Unsigned32 (0..15) | RW | |
scalar · Unsigned32 (0..15) · read-write · current Determines the AMD (Answer Machine Detector) high resolution detection sensitivity. The high resolution has 16 levels of sensitivity while the normal resolution (Answer Machine Detector Sensitivity) has 8 levels. 0 = Best detection of an answering machine 15 = Best detection of a live call. Access: Online. AC INI-Param: AMDSensitivityLevel | ||||
| SacIPMediaAMDSensitivityResolution | 1.3.6.1.4.1.5003.9.10.4.1.6.5.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Determines the AMD (Answer Machine Detector) detection sensitivity resolution: 0 = Normal detection sensitivity resolution (8 sensitivity levels) 1 = High detection sensitivity resolution (16 sensitivity levels). Access: Online. AC INI-Param: AMDSensitivityParameterSuit
| ||||
| SacIPMediaAMDBeepDetectionTimeout | 1.3.6.1.4.1.5003.9.10.4.1.6.5.5 | Unsigned32 (0..1638) | RW | |
scalar · Unsigned32 (0..1638) · read-write · current Determines the AMD (Answer Machine Detector) Beep detection timeout. Units of 100 milliseconds, values from 0 to 1638 (163.8 seconds). Access: Online. AC INI-Param: AMDBeepDetectionTimeout | ||||
| SacIPMediaAMDBeepDetectionSensitivity | 1.3.6.1.4.1.5003.9.10.4.1.6.5.6 | Unsigned32 (0..3) | RW | |
scalar · Unsigned32 (0..3) · read-write · current Determines the AMD (Answer Machine Detector) Beep detection sensitivity. 0 - Least sensitive. 3 - Most sensitive. Access: Online. AC INI-Param: AMDBeepDetectionSensitivity | ||||
| SacIPMediaAMDSensitivityParameterSuit | 1.3.6.1.4.1.5003.9.10.4.1.6.5.7 | Unsigned32 (0..7) | RW | |
scalar · Unsigned32 (0..7) · read-write · current Determines the serial number of the AMD (Answer Machine Detector) parameter suit: 0 = USA Parameter Suit with normal detection sensitivity resolution (8 sensitivity levels) 1 = USA Parameter Suit with high detection sensitivity resolution (16 sensitivity levels) 2-7 : other countries parameter suits with up to 16 sensitivity levels. Access: Online. AC INI-Param: AMDSensitivityParameterSuit | ||||
| SacIPMediaAMDSensitivityLevel | 1.3.6.1.4.1.5003.9.10.4.1.6.5.8 | Unsigned32 (0..15) | RW | |
scalar · Unsigned32 (0..15) · read-write · current Determines the AMD (Answer Machine Detector) level of detection sensitivity. It has 16 levels of sensitivity : 0 = Best detection of an answering machine 15 = Best detection of a live call. Access: Online. AC INI-Param: AMDSensitivityLevel | ||||
| NacIPMConference | 1.3.6.1.4.1.5003.9.10.4.1.6.6 | |||
| SacIPMConferenceGASNMinInterval | 1.3.6.1.4.1.5003.9.10.4.1.6.6.1 | Unsigned32 (10..65535) | RW | |
scalar · Unsigned32 (10..65535) · read-write · current Minimum interval between Active Speaker Notification (ASN) events. An ASN event reports on the active speakers in a conference. The event is issued whenever the active speakers change. units = 100 ms Minimum configurable interval between events is 500 ms (5 units). Access: Instant. AC INI-Param: ACTIVESPEAKERSNOTIFICATIONMININTERVAL | ||||
| SacIPMConferenceEnergythreshold | 1.3.6.1.4.1.5003.9.10.4.1.6.6.2 | Unsigned32 (0..39) | RW | |
scalar · Unsigned32 (0..39) · read-write · current Conference - Minimum energy level for a user to be included in Active Speaker Notification (ASN) events (units: -dBm). Valid range 0 to (-39) dbm. Access: Instant. AC INI-Param: ActiveSpeakerEnergyThreshold | ||||
| SacIPMConferenceEnableHDConference | 1.3.6.1.4.1.5003.9.10.4.1.6.6.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable\Disable HD Conference. Access: Offline. AC INI-Param: EnableHDConference
| ||||
| NacIPMVideoConference | 1.3.6.1.4.1.5003.9.10.4.1.6.7 | |||
| SacIPMVideoConferenceSwitchingInterval | 1.3.6.1.4.1.5003.9.10.4.1.6.7.1 | Unsigned32 (0..65535) | RW | obsolete |
scalar · Unsigned32 (0..65535) · read-write · obsolete Determines the video view rotation interval in seconds. Applicable when using timer trigger switching mode. Access: Online. AC INI-Param: VideoConferenceSwitchingInterval | ||||
| SacIPMVideoConferenceEnableActiveSpeakerHighlight | 1.3.6.1.4.1.5003.9.10.4.1.6.7.2 | INTEGER | RW | obsolete |
scalar · INTEGER · read-write · obsolete Highlights the speaker for participants viewing a symmetric layout (2x2 or 3x3) . 0 - Don't highlight active speaker. 1 - Highlight active speaker. Access: Online. AC INI-Param: VideoEnableActiveSpeakerHighlight
| ||||
| SacIPMVideoConferenceParticipantType | 1.3.6.1.4.1.5003.9.10.4.1.6.7.3 | INTEGER | RW | obsolete |
scalar · INTEGER · read-write · obsolete Indicates a participant's capabilities in the conference. Regular (2) - Regular participant who is able to both send and receive video. . Access: Online. AC INI-Param: VideoConferenceParticipantType
| ||||
| SacIPMVideoConferenceParticipantTriggerMode | 1.3.6.1.4.1.5003.9.10.4.1.6.7.4 | INTEGER | RW | obsolete |
scalar · INTEGER · read-write · obsolete Participant trigger mode defines the trigger for modifying the participant's view. Voice Activated Video Switch (0) - A participant's view will be changed according to the active speakers' detection. Timer (1) - A participant's view is rotated every configured time among the different video participants in the conference. Fixed (3) - A participant's view is fixed. . Access: Online. AC INI-Param: VideoConferenceParticipantTriggerMode
| ||||
| SacIPMVideoConferenceParticipantLayout | 1.3.6.1.4.1.5003.9.10.4.1.6.7.5 | INTEGER | RW | obsolete |
scalar · INTEGER · read-write · obsolete Indicates the participant's view layout. 1 user (0). 2*2 users (1). All same size. 3*3 users (2). All same size. . Access: Online. AC INI-Param: VideoConferenceParticipantLayout
| ||||
| SacIPMVideoConferenceEnableConferenceParticipantSelfView | 1.3.6.1.4.1.5003.9.10.4.1.6.7.6 | INTEGER | RW | obsolete |
scalar · INTEGER · read-write · obsolete Self view indication. 0 - The participant cannot view himself 1 - The participant can view himself. Access: Online. AC INI-Param: VideoEnableConferenceParticipantSelfView
| ||||
| NacMediaCallerIDConfig | 1.3.6.1.4.1.5003.9.10.4.1.7 | |||
| NacCallerID | 1.3.6.1.4.1.5003.9.10.4.1.7.1 | |||
| SacCallerIDTypes | 1.3.6.1.4.1.5003.9.10.4.1.7.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Defines the supported Caller ID standard. 0 = Bellcore 1 = ETSI 2 = NTT 4 = British 16 = ETSI_ETS 17 = Denmark 18 = Indian 19 = Brazilian. Access: Online. AC INI-Param: CALLERIDTYPE
| ||||
| SacCallerIDTransportType | 1.3.6.1.4.1.5003.9.10.4.1.7.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Defines the CallerID Transport type. 0 = Disable 1 = Relay 3 = Mute. Access: Online. AC INI-Param: CallerIDTransportType
| ||||
| SacCallerIDDTMFBasedMaxDigits | 1.3.6.1.4.1.5003.9.10.4.1.7.1.3 | Unsigned32 (0..26) | RW | |
scalar · Unsigned32 (0..26) · read-write · current Determines the maximum number of DTMF digits in a DTMF-based Caller ID string. Range = 0 to 26. Access: Online. AC INI-Param: MAXDTMFDIGITSINCIDSTRING | ||||
| SacCallerIDDTMFBasedMinDigits | 1.3.6.1.4.1.5003.9.10.4.1.7.1.4 | Unsigned32 (0..26) | RW | |
scalar · Unsigned32 (0..26) · read-write · current Determines the mimumum number of DTMF digits in a DTMF-based Caller ID string. Range = 0 to 26. Access: Online. AC INI-Param: MINDTMFDIGITSINCIDSTRING | ||||
| SacCallerIDNTTDIDSignallingForm | 1.3.6.1.4.1.5003.9.10.4.1.7.1.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current Configures the signalling format used when generating an NTT DID. 0 = FSK Siganl 1 = DTMF Based Signal. Access: Online. AC INI-Param: NTTDIDSignallingForm
| ||||
| NacMediaNetworkConfig | 1.3.6.1.4.1.5003.9.10.4.1.8 | |||
| NacMediaNetwork | 1.3.6.1.4.1.5003.9.10.4.1.8.1 | |||
| SacMediaNetworkDisableNAT | 1.3.6.1.4.1.5003.9.10.4.1.8.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Determines the mode of NAT feature: 0 = NAT is only optionally. 1 = NAT is disabled. 2 = NAT is for sure. Access: Online. AC INI-Param: DISABLENAT
| ||||
| SacMediaNetworkRtpIpTos | 1.3.6.1.4.1.5003.9.10.4.1.8.1.2 | Unsigned32 (0..15) | RW | obsolete |
scalar · Unsigned32 (0..15) · read-write · obsolete Sets value of IP Type Of Service field in IP header for all packets generated from this channel. Follow the acTIPTOS enumeration. Access: Instant. AC INI-Param: IPTOS | ||||
| SacMediaNetworkRtpIpPrecedence | 1.3.6.1.4.1.5003.9.10.4.1.8.1.3 | Unsigned32 (0..7) | RW | obsolete |
scalar · Unsigned32 (0..7) · read-write · obsolete Sets value of the IP precedence field in the IP header for all packets generated from this channel. Follow the acTIPPrecedence enumeration. Access: Instant. AC INI-Param: IPPRECEDENCE | ||||
| SacMediaNetworkIPDiffServ | 1.3.6.1.4.1.5003.9.10.4.1.8.1.4 | Unsigned32 (0..63) | RW | obsolete |
scalar · Unsigned32 (0..63) · read-write · obsolete Defines the value of the 'DiffServ' field in the IP header for media (RTP) traffic. Range: 0 to 63. Access: Instant. AC INI-Param: IPDIFFSERV | ||||
| SacMediaNetworkInboundLatchMode | 1.3.6.1.4.1.5003.9.10.4.1.8.1.5 | INTEGER | RW | |
scalar · INTEGER · read-write · current Determines the way of handling incoming media packets from non-expected address/port. Access: Online. AC INI-Param: InboundMediaLatchMode
| ||||
| NacMediaJBConfig | 1.3.6.1.4.1.5003.9.10.4.1.9 | |||
| NacJitterBuffer | 1.3.6.1.4.1.5003.9.10.4.1.9.1 | |||
| SacJitterBufferMinDelay | 1.3.6.1.4.1.5003.9.10.4.1.9.1.1 | Unsigned32 (0..150) | RW | |
scalar · Unsigned32 (0..150) · read-write · current Defines the Dynamic Jitter Buffer Minimum Delay (in msec). Recommended value for a regular voice call is 10. Access: Online. AC INI-Param: DJBUFMINDELAY | ||||
| SacJitterBufferOptFactor | 1.3.6.1.4.1.5003.9.10.4.1.9.1.2 | Unsigned32 (0..13) | RW | |
scalar · Unsigned32 (0..13) · read-write · current Defines the Dynamic Jitter Buffer frame error/delay optimization. Recommended value for a regular voice call is 10. Access: Online. AC INI-Param: DJBUFOPTFACTOR | ||||
| NacVideoJitterBuffer | 1.3.6.1.4.1.5003.9.10.4.1.9.2 | |||
| SacVideoJitterBufferMinDelay | 1.3.6.1.4.1.5003.9.10.4.1.9.2.1 | Unsigned32 (0..500) | RW | obsolete |
scalar · Unsigned32 (0..500) · read-write · obsolete Jitter buffer minimum delay in milliseconds. Must be less than JitterBufferMaxDelay. Access: Online. AC INI-Param: VideoJitterBufferMinDelay | ||||
| SacVideoJitterBufferMaxDelay | 1.3.6.1.4.1.5003.9.10.4.1.9.2.2 | Unsigned32 (0..500) | RW | obsolete |
scalar · Unsigned32 (0..500) · read-write · obsolete Jitter buffer maximum delay in milliseconds. Access: Online. AC INI-Param: VideoJitterBufferMaxDelay | ||||
| SacVideoJitterBufferDJBOptimizationFactor | 1.3.6.1.4.1.5003.9.10.4.1.9.2.3 | Unsigned32 (0..10) | RW | obsolete |
scalar · Unsigned32 (0..10) · read-write · obsolete JB Optimization Factor controls the jitter buffer's adaptation rates A High factor means fast adaptation when jitter increases, and a slow adaptation when jitter decrease. Small factor means slow adaptation when jitter increases, and a fast adaptation when jitter decreases. . Access: Online. AC INI-Param: VideoDJBOptimizationFactor | ||||
| NacMediaAggregation | 1.3.6.1.4.1.5003.9.10.4.1.10 | |||
| SacMediaAggregationRemoteBaseUDPPort | 1.3.6.1.4.1.5003.9.10.4.1.10.1 | Unsigned32 (0..65535) | RW | obsolete |
scalar · Unsigned32 (0..65535) · read-write · obsolete Remote Base UDP Port For Aggrigation. Access: Offline. AC INI-Param: REMOTEBASEUDPPORT | ||||
| SacMediaAggregationL1L1ComplexRxUDPPort | 1.3.6.1.4.1.5003.9.10.4.1.10.2 | Unsigned32 (0..65535) | RW | |
scalar · Unsigned32 (0..65535) · read-write · current The UDP port for the incoming (from the remote side) and the outgoing (destination UDP) packets, for Complex Multiplexed RTP mode. Access: Offline. AC INI-Param: L1L1ComplexRxUDPPort | ||||
| SacMediaAggregationL1L1ComplexTxUDPPort | 1.3.6.1.4.1.5003.9.10.4.1.10.3 | Unsigned32 (0..65535) | RW | |
scalar · Unsigned32 (0..65535) · read-write · current The Source UDP port for the outgoing UDP Multiplexed RTP packets, for Complex-Multiplex RTP mode. Access: Offline. AC INI-Param: L1L1ComplexTxUDPPort | ||||
| NacStreamingCache | 1.3.6.1.4.1.5003.9.10.4.1.11 | |||
| SacStreamingCacheSize | 1.3.6.1.4.1.5003.9.10.4.1.11.1 | Unsigned32 (0..32) | RW | |
scalar · Unsigned32 (0..32) · read-write · current Sets the streaming cache size in MBs. The remaining size (out of 32MBs) is used as VoicePrompt storage. Access: Offline. AC INI-Param: gStreamingCacheSize | ||||
| SacStreamingCacheRefreshTime | 1.3.6.1.4.1.5003.9.10.4.1.11.2 | Integer32 (-1..65535) | RW | |
scalar · Integer32 (-1..65535) · read-write · current Defines the streaming cache data refresh time in minutes. If -1 is set, refresh is off. Access: Offline. AC INI-Param: gStreamingCacheRefreshTime | ||||
| SacStreamingCacheClearService | 1.3.6.1.4.1.5003.9.10.4.1.11.3 | Unsigned32 (1..2) | RW | |
scalar · Unsigned32 (1..2) · read-write · current reset the streaming cache. Access: Instant. AC INI-Param: N/A | ||||
| NacMediaVideoConfig | 1.3.6.1.4.1.5003.9.10.4.1.12 | |||
| SacMediaVideoConfigEncoderIntraInterval | 1.3.6.1.4.1.5003.9.10.4.1.12.1 | Unsigned32 (0..65535) | RW | obsolete |
scalar · Unsigned32 (0..65535) · read-write · obsolete Sets the frequency for the number of frames at which the encoder outputs an Intra frame. Access: Online. AC INI-Param: VideoEncoderIntraInterval | ||||
| SacMediaVideoConfigMaxPacketSize | 1.3.6.1.4.1.5003.9.10.4.1.12.2 | Unsigned32 (1..1400) | RW | obsolete |
scalar · Unsigned32 (1..1400) · read-write · obsolete Sets the maximum packet size in bytes. Access: Online. AC INI-Param: VideoMaxPacketSize | ||||
| SacMediaVideoConfigTargetBitrate | 1.3.6.1.4.1.5003.9.10.4.1.12.3 | Unsigned32 (1..384) | RW | obsolete |
scalar · Unsigned32 (1..384) · read-write · obsolete Sets the target output bit rate. Access: Online. AC INI-Param: VideoTargetBitrate | ||||
| SacMediaVideoConfigQualityParameterForRateControl | 1.3.6.1.4.1.5003.9.10.4.1.12.4 | Unsigned32 (0..31) | RW | obsolete |
scalar · Unsigned32 (0..31) · read-write · obsolete This value determines the trade off between video quality and frame rate. A low value indicates a higher quality with a lower frame rate and vice versa. Access: Online. AC INI-Param: VideoQualityParameterForRateControl | ||||
| SacMediaVideoConfigRateControlType | 1.3.6.1.4.1.5003.9.10.4.1.12.5 | INTEGER | RW | obsolete |
scalar · INTEGER · read-write · obsolete Sets bitrate output to either a constant or a variable bit rate. CBR (0) - Constant Bit Rate. VBR (1) - Variable Bit Rate. Target Bitrate indicates the target average output bit rate. . Access: Online. AC INI-Param: VideoRateControlType
| ||||
| SacMediaVideoConfigEnableReSyncHeader | 1.3.6.1.4.1.5003.9.10.4.1.12.6 | INTEGER | RW | obsolete |
scalar · INTEGER · read-write · obsolete Indicates whether to add a video packet header to every packet in order to increase error resilience. 0 - Disable 1 - Enable. Access: Online. AC INI-Param: VideoEnableReSyncHeader
| ||||
| SacMediaVideoConfigEnableAudioVideoSynchronization | 1.3.6.1.4.1.5003.9.10.4.1.12.7 | INTEGER | RW | obsolete |
scalar · INTEGER · read-write · obsolete Determines whether to enable audio and video synchronization. 0 - No synchronization between audio and video streams 1 - Synchronization between audio and video streams . Access: Online. AC INI-Param: EnableAudioVideoSynchronization
| ||||
| NacIPMediaChannels | 1.3.6.1.4.1.5003.9.10.4.1.13 | |||
| SacIPMediaChannelsEnable | 1.3.6.1.4.1.5003.9.10.4.1.13.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Whether to enable DSP channels reservation for IPmedia support. Relevant for Mediant 1000 board only. One of the following possible 0 = Disable 1 - Enable. Access: Offline. AC INI-Param: EnableIPMediaChannels
| ||||
| TacIPMediaChannelsResourcesTable | 1.3.6.1.4.1.5003.9.10.4.1.13.21 | NA | ||
table · not-accessible · current IPMedia channels info | ||||
| RacIPMediaChannelsResourcesEntry | 1.3.6.1.4.1.5003.9.10.4.1.13.21.1 | NA | ||
row · not-accessible · current | ||||
| CacIPMediaChannelsResourcesIndex | 1.3.6.1.4.1.5003.9.10.4.1.13.21.1.1 | Unsigned32 (0..5) | NA | |
column · Unsigned32 (0..5) · not-accessible · current Index Field for line. Internal parameter. AC INI-Param: IPMediaChannels_Index | ||||
| CacIPMediaChannelsResourcesRowStatus | 1.3.6.1.4.1.5003.9.10.4.1.13.21.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current ROWSTATUS field for line. Internal parameter. AC INI-Param: N/A | ||||
| CacIPMediaChannelsResourcesAction | 1.3.6.1.4.1.5003.9.10.4.1.13.21.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current Mangement Field for ACTIONS. Internal parameter. AC INI-Param: N/A
| ||||
| CacIPMediaChannelsResourcesActionRes | 1.3.6.1.4.1.5003.9.10.4.1.13.21.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Mangement Field for ACTIONS RESULT. Internal parameter. AC INI-Param: N/A
| ||||
| CacIPMediaChannelsResourcesModuleID | 1.3.6.1.4.1.5003.9.10.4.1.13.21.1.5 | Unsigned32 (0..6) | RC | |
column · Unsigned32 (0..6) · read-create · current Refers to M1K board only, module at which slot. Access: Offline. AC INI-Param: IPMediaChannels_ModuleID | ||||
| CacIPMediaChannelsResourcesDSPChannelsReserved | 1.3.6.1.4.1.5003.9.10.4.1.13.21.1.6 | Unsigned32 (0..10000) | RC | |
column · Unsigned32 (0..10000) · read-create · current How many DSP channels reserve for IPMedia channels. Access: Offline. AC INI-Param: IPMediaChannels_DSPChannelsReserved | ||||
| NacAcousticEchoSuppressor | 1.3.6.1.4.1.5003.9.10.4.1.14 | |||
| SacAcousticEchoSuppressorEnable | 1.3.6.1.4.1.5003.9.10.4.1.14.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable support of network echo suppressor on board level. Reduces board resource capacity. Access: Offline. AC INI-Param: ACOUSTICECHOSUPPRESSORSUPPORT
| ||||
| SacAcousticEchoSuppressorEchoCancellerType | 1.3.6.1.4.1.5003.9.10.4.1.14.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Echo Canceller type. Line echo canceller for TDM Side or acoustic echo suppressor on network side. Access: Online. AC INI-Param: ECHOCANCELLERTYPE
| ||||
| SacAcousticEchoSuppressorAttenuationIntensity | 1.3.6.1.4.1.5003.9.10.4.1.14.3 | Unsigned32 (0..3) | RW | |
scalar · Unsigned32 (0..3) · read-write · current Acoustic echo suppressor attenuation intensity. intensity of attenuation on signals identified as echo. Access: Online. AC INI-Param: ACOUSTICECHOSUPPATTENUATIONINTENSITY | ||||
| SacAcousticEchoSuppressorMaxERLThreshold | 1.3.6.1.4.1.5003.9.10.4.1.14.4 | Unsigned32 (0..60) | RW | |
scalar · Unsigned32 (0..60) · read-write · current Acoustic echo suppressor max ERL threshold in DB. Max ratio between signal level and retruned echo from phone. Access: Online. AC INI-Param: ACOUSTICECHOSUPPMAXERLTHRESHOLD | ||||
| SacAcousticEchoSuppressorMinReferenceDelay | 1.3.6.1.4.1.5003.9.10.4.1.14.5 | Unsigned32 (0..40) | RW | |
scalar · Unsigned32 (0..40) · read-write · current Acoustic echo suppressor MIN reference delay in mSec. The reference delay in the network helps echo suppression algorithm to identify echo signals. The entered value will be multiplied by 10. Access: Online. AC INI-Param: ACOUSTICECHOSUPPMINREFDELAYx10MS | ||||
| SacAcousticEchoSuppressorMaxReferenceDelay | 1.3.6.1.4.1.5003.9.10.4.1.14.6 | Unsigned32 (0..40) | RW | |
scalar · Unsigned32 (0..40) · read-write · current Acoustic echo suppressor MAX reference delay. The reference delay in the network helps echo suppression algorithm to identify echo signals. The entered value will be multiplied by 10. Access: Online. AC INI-Param: ACOUSTICECHOSUPPMAXREFDELAYx10MS | ||||
| NacRobustSettings | 1.3.6.1.4.1.5003.9.10.4.1.15 | |||
| SacRobustSettingsNewRtpStreamPackets | 1.3.6.1.4.1.5003.9.10.4.1.15.1 | Unsigned32 (0..100) | RW | |
scalar · Unsigned32 (0..100) · read-write · current Minimal number of continuous RTP packets, allowing latching an incoming RTP stream. Access: Online. AC INI-Param: NewRtpStreamPackets | ||||
| SacRobustSettingsNewRtcpStreamPackets | 1.3.6.1.4.1.5003.9.10.4.1.15.2 | Unsigned32 (0..100) | RW | |
scalar · Unsigned32 (0..100) · read-write · current Minimal number of continuous RTCP packets, allowing latching an incoming RTCP stream. Access: Online. AC INI-Param: NewRtcpStreamPackets | ||||
| SacRobustSettingsNewSRTPStreamPackets | 1.3.6.1.4.1.5003.9.10.4.1.15.3 | Unsigned32 (0..100) | RW | |
scalar · Unsigned32 (0..100) · read-write · current Minimal number of continuous RTP packets, allowing latching an incoming RTP stream. Access: Online. AC INI-Param: NewSRTPStreamPackets | ||||
| SacRobustSettingsGNewSRtcpStreamPackets | 1.3.6.1.4.1.5003.9.10.4.1.15.4 | Unsigned32 (0..100) | RW | |
scalar · Unsigned32 (0..100) · read-write · current Minimal number of continuous RTCP packets, allowing latching an incoming RTCP stream. Access: Online. AC INI-Param: NewSRtcpStreamPackets | ||||
| SacRobustSettingsTimeoutToRelatchRTPMsec | 1.3.6.1.4.1.5003.9.10.4.1.15.5 | Unsigned32 (0..2147483647) | RW | |
scalar · Unsigned32 (0..2147483647) · read-write · current If a channel latched on an incoming RTP stream, it cannot relatch on another one until no packets of the old stream arrive during the timeout (msec). Access: Online. AC INI-Param: TimeoutToRelatchRTPMsec | ||||
| SacRobustSettingsTimeoutToRelatchSRTPMsec | 1.3.6.1.4.1.5003.9.10.4.1.15.6 | Unsigned32 (0..2147483647) | RW | |
scalar · Unsigned32 (0..2147483647) · read-write · current If a channel latched on an incoming SRTP stream, it cannot relatch on another one until no packets of the old stream arrive during the timeout (msec). Access: Online. AC INI-Param: TimeoutToRelatchSRTPMsec | ||||
| SacRobustSettingsTimeoutToRelatchSilenceMsec | 1.3.6.1.4.1.5003.9.10.4.1.15.7 | Unsigned32 (0..2147483647) | RW | |
scalar · Unsigned32 (0..2147483647) · read-write · current If a channel latched on an incoming RTP stream, it cannot relatch on another one until no packets of the old stream arrive during the timeout (msec). Access: Online. AC INI-Param: TimeoutToRelatchSilenceMsec | ||||
| SacRobustSettingsTimeoutToRelatchRTCPMsec | 1.3.6.1.4.1.5003.9.10.4.1.15.8 | Unsigned32 (0..2147483647) | RW | |
scalar · Unsigned32 (0..2147483647) · read-write · current If a channel latched on an incoming RTP stream, it cannot relatch on another one until no packets of the old stream arrive during the timeout (msec). Access: Online. AC INI-Param: TimeoutToRelatchRTCPMsec | ||||
| SacRobustSettingsFaxRelayRxTxTimeoutSec | 1.3.6.1.4.1.5003.9.10.4.1.15.9 | Unsigned32 (0..255) | RW | |
scalar · Unsigned32 (0..255) · read-write · current Fax Relay Rx/Tx Timeout (sec). Access: Online. AC INI-Param: FaxRelayTimeoutSec | ||||
| NacMediaTranscodingCluster | 1.3.6.1.4.1.5003.9.10.4.1.16 | |||
| NacMediaTranscodingClusterManager | 1.3.6.1.4.1.5003.9.10.4.1.16.1 | |||
| SacMediaTranscodingClusterManagerUtilization | 1.3.6.1.4.1.5003.9.10.4.1.16.1.1 | SnmpAdminString (SIZE (0..32)) | RO | |
scalar · SnmpAdminString (SIZE (0..32)) · read-only · current Cluster Manager Utilization. AC INI-Param: N/A | ||||
| SacMediaTranscodingClusterManagerHaUsage | 1.3.6.1.4.1.5003.9.10.4.1.16.1.2 | SnmpAdminString (SIZE (0..32)) | RO | |
scalar · SnmpAdminString (SIZE (0..32)) · read-only · current Cluster Manager Ha Usage. AC INI-Param: N/A | ||||
| SacMediaTranscodingClusterManagerDspChannelCount | 1.3.6.1.4.1.5003.9.10.4.1.16.1.3 | Unsigned32 (0..2000000) | RO | |
scalar · Unsigned32 (0..2000000) · read-only · current Cluster Manager Dsp Channels Count. AC INI-Param: N/A | ||||
| SacMediaTranscodingClusterManagerTotalEntities | 1.3.6.1.4.1.5003.9.10.4.1.16.1.4 | Unsigned32 (0..64000) | RO | |
scalar · Unsigned32 (0..64000) · read-only · current Cluster Manager Total Mtce. AC INI-Param: N/A | ||||
| SacMediaTranscodingClusterManagerAvailableEntities | 1.3.6.1.4.1.5003.9.10.4.1.16.1.5 | Unsigned32 (0..64000) | RO | |
scalar · Unsigned32 (0..64000) · read-only · current Cluster Manager Available Mtce. AC INI-Param: N/A | ||||
| SacMediaTranscodingClusterManagerHaStatus | 1.3.6.1.4.1.5003.9.10.4.1.16.1.6 | SnmpAdminString (SIZE (0..32)) | RO | |
scalar · SnmpAdminString (SIZE (0..32)) · read-only · current Cluster Manager Ha Status. AC INI-Param: N/A | ||||
| NacMediaTranscodingClusterEntities | 1.3.6.1.4.1.5003.9.10.4.1.16.21 | |||
| TacMediaTranscodingClusterEntitiesTable | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1 | NA | ||
| RacMediaTranscodingClusterEntitiesEntry | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1 | NA | ||
row · not-accessible · current | ||||
| CacMediaTranscodingClusterEntitiesIndex | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.1 | Unsigned32 (0..10) | NA | |
column · Unsigned32 (0..10) · not-accessible · current AC INI-Param: MtcEntities_Index | ||||
| CacMediaTranscodingClusterEntitiesRowStatus | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current ROWSTATUS field for line. Internal parameter. AC INI-Param: N/A | ||||
| CacMediaTranscodingClusterEntitiesAction | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Development Impending. AC INI-Param: N/A
| ||||
| CacMediaTranscodingClusterEntitiesActionResult | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current Development Impending. AC INI-Param: N/A
| ||||
| CacMediaTranscodingClusterEntitiesMtceName | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.5 | SnmpAdminString (SIZE (0..32)) | RW | |
column · SnmpAdminString (SIZE (0..32)) · read-write · current Media transcoding cluster entity name. Access: Offline. AC INI-Param: MtcEntities_MtceName | ||||
| CacMediaTranscodingClusterEntitiesMtceOamIpAddr | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.6 | SnmpAdminString (SIZE (0..15)) | RW | |
column · SnmpAdminString (SIZE (0..15)) · read-write · current IP Address. Access: Offline. AC INI-Param: MtcEntities_MtceOamIpAddr | ||||
| CacMediaTranscodingClusterEntitiesMtceAdminState | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Media transcoding cluster entity administrator state (Locked / Unlocked). AC INI-Param: MtcEntities_MtceAdminState
| ||||
| CacMediaTranscodingClusterEntitiesMtceVersion | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.8 | SnmpAdminString (SIZE (0..32)) | RO | |
column · SnmpAdminString (SIZE (0..32)) · read-only · current Media transcoding cluster entity version name. AC INI-Param: MtcEntities_MtceVersion | ||||
| CacMediaTranscodingClusterEntitiesMtceStatus | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Media transcoding cluster entity status (disconnected / connected etc.). AC INI-Param: MtcEntities_MtceStatus | ||||
| CacMediaTranscodingClusterEntitiesMtceUtilization | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.10 | SnmpAdminString (SIZE (0..8)) | RO | |
column · SnmpAdminString (SIZE (0..8)) · read-only · current Media transcoding cluster entity occupied resources (percentage). AC INI-Param: MtcEntities_MtceUtilization | ||||
| CacMediaTranscodingClusterEntitiesMtceAlarmSeverity | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Media transcoding cluster entity currently alarm severity. AC INI-Param: MtcEntities_MtceAlarmSeverity | ||||
| CacMediaTranscodingClusterEntitiesMtceType | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.12 | SnmpAdminString (SIZE (0..32)) | RO | |
column · SnmpAdminString (SIZE (0..32)) · read-only · current MTCE board type. AC INI-Param: MtcEntities_MtceType | ||||
| CacMediaTranscodingClusterEntitiesMtceSerialNumber | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.13 | SnmpAdminString (SIZE (0..32)) | RO | |
column · SnmpAdminString (SIZE (0..32)) · read-only · current MTCE serial number. AC INI-Param: MtcEntities_MtceSerialNumber | ||||
| CacMediaTranscodingClusterEntitiesDeviceUpTime | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.14 | SnmpAdminString (SIZE (0..32)) | RO | obsolete |
column · SnmpAdminString (SIZE (0..32)) · read-only · obsolete MTCE device up time. AC INI-Param: MtcEntities_DeviceUpTime | ||||
| CacMediaTranscodingClusterEntitiesDspSwName | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.15 | SnmpAdminString (SIZE (0..24)) | RO | obsolete |
column · SnmpAdminString (SIZE (0..24)) · read-only · obsolete MTCE MtcEntities_DspSwName. AC INI-Param: MtcEntities_DspSwName | ||||
| CacMediaTranscodingClusterEntitiesDspCount | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.16 | Unsigned32 (0..4294967295) | RO | obsolete |
column · Unsigned32 (0..4294967295) · read-only · obsolete DSP Count. AC INI-Param: MtcEntities_DspCount | ||||
| CacMediaTranscodingClusterEntitiesDspSwVersion | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.17 | SnmpAdminString (SIZE (0..24)) | RO | obsolete |
column · SnmpAdminString (SIZE (0..24)) · read-only · obsolete DSP software version. AC INI-Param: MtcEntities_DspSwVersion | ||||
| CacMediaTranscodingClusterEntitiesDspUtilization | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.18 | SnmpAdminString (SIZE (0..8)) | RO | obsolete |
column · SnmpAdminString (SIZE (0..8)) · read-only · obsolete DSP utilization. AC INI-Param: MtcEntities_DspUtilization | ||||
| CacMediaTranscodingClusterEntitiesFanTrayStatus1 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.19 | SnmpAdminString (SIZE (0..32)) | RO | obsolete |
column · SnmpAdminString (SIZE (0..32)) · read-only · obsolete Fan tray 1 status. AC INI-Param: MtcEntities_FanTrayStatusA | ||||
| CacMediaTranscodingClusterEntitiesFanTrayStatus2 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.20 | SnmpAdminString (SIZE (0..32)) | RO | obsolete |
column · SnmpAdminString (SIZE (0..32)) · read-only · obsolete Fan tray 2 status. AC INI-Param: MtcEntities_FanTrayStatusB | ||||
| CacMediaTranscodingClusterEntitiesPowerSupplyStatus1 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.21 | SnmpAdminString (SIZE (0..32)) | RO | obsolete |
column · SnmpAdminString (SIZE (0..32)) · read-only · obsolete Power supply 1 status. AC INI-Param: MtcEntities_PowerSupplyStatusA | ||||
| CacMediaTranscodingClusterEntitiesPowerSupplyStatus2 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.22 | SnmpAdminString (SIZE (0..32)) | RO | obsolete |
column · SnmpAdminString (SIZE (0..32)) · read-only · obsolete Power supply 2 status. AC INI-Param: MtcEntities_PowerSupplyStatusB | ||||
| CacMediaTranscodingClusterEntitiesInterfaceIndex1 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.23 | SnmpAdminString (SIZE (0..16)) | RO | obsolete |
column · SnmpAdminString (SIZE (0..16)) · read-only · obsolete MTCE interface index 1 - ID. AC INI-Param: MtcEntities_InterfaceIndexA | ||||
| CacMediaTranscodingClusterEntitiesInterfaceIndex2 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.24 | SnmpAdminString (SIZE (0..16)) | RO | obsolete |
column · SnmpAdminString (SIZE (0..16)) · read-only · obsolete MTCE interface index 2 - ID. AC INI-Param: MtcEntities_InterfaceIndexB | ||||
| CacMediaTranscodingClusterEntitiesInterfaceIndex3 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.25 | SnmpAdminString (SIZE (0..16)) | RO | obsolete |
column · SnmpAdminString (SIZE (0..16)) · read-only · obsolete MTCE interface index 3 - ID. AC INI-Param: MtcEntities_InterfaceIndexC | ||||
| CacMediaTranscodingClusterEntitiesInterfaceIndex4 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.26 | SnmpAdminString (SIZE (0..16)) | RO | obsolete |
column · SnmpAdminString (SIZE (0..16)) · read-only · obsolete MTCE interface index 4 - ID. AC INI-Param: MtcEntities_InterfaceIndexD | ||||
| CacMediaTranscodingClusterEntitiesNetworkGroup1 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.27 | SnmpAdminString (SIZE (0..15)) | RO | obsolete |
column · SnmpAdminString (SIZE (0..15)) · read-only · obsolete MTCE interface index 1 - network group. AC INI-Param: MtcEntities_NetworkGroupA | ||||
| CacMediaTranscodingClusterEntitiesNetworkGroup2 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.28 | SnmpAdminString (SIZE (0..15)) | RO | obsolete |
column · SnmpAdminString (SIZE (0..15)) · read-only · obsolete MTCE interface index 2 - network group. AC INI-Param: MtcEntities_NetworkGroupB | ||||
| CacMediaTranscodingClusterEntitiesNetworkGroup3 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.29 | SnmpAdminString (SIZE (0..15)) | RO | obsolete |
column · SnmpAdminString (SIZE (0..15)) · read-only · obsolete MTCE interface index 3 - network group. AC INI-Param: MtcEntities_NetworkGroupC | ||||
| CacMediaTranscodingClusterEntitiesNetworkGroup4 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.30 | SnmpAdminString (SIZE (0..15)) | RO | obsolete |
column · SnmpAdminString (SIZE (0..15)) · read-only · obsolete MTCE interface index 4 - network group. AC INI-Param: MtcEntities_NetworkGroupD | ||||
| CacMediaTranscodingClusterEntitiesApplicationType1 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.31 | SnmpAdminString (SIZE (0..24)) | RO | obsolete |
column · SnmpAdminString (SIZE (0..24)) · read-only · obsolete MTCE interface index 1 - application type. AC INI-Param: MtcEntities_ApplicationTypeA | ||||
| CacMediaTranscodingClusterEntitiesApplicationType2 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.32 | SnmpAdminString (SIZE (0..24)) | RO | obsolete |
column · SnmpAdminString (SIZE (0..24)) · read-only · obsolete MTCE interface index 2 - application type. AC INI-Param: MtcEntities_ApplicationTypeB | ||||
| CacMediaTranscodingClusterEntitiesApplicationType3 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.33 | SnmpAdminString (SIZE (0..24)) | RO | obsolete |
column · SnmpAdminString (SIZE (0..24)) · read-only · obsolete MTCE interface index 3 - application type. AC INI-Param: MtcEntities_ApplicationTypeC | ||||
| CacMediaTranscodingClusterEntitiesApplicationType4 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.34 | SnmpAdminString (SIZE (0..24)) | RO | obsolete |
column · SnmpAdminString (SIZE (0..24)) · read-only · obsolete MTCE interface index 4 - application type. AC INI-Param: MtcEntities_ApplicationTypeD | ||||
| CacMediaTranscodingClusterEntitiesIp1ddress1 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.35 | IpAddress | RO | obsolete |
column · IpAddress · read-only · obsolete MTCE interface index 1 - IP address. AC INI-Param: MtcEntities_IpAddressA | ||||
| CacMediaTranscodingClusterEntitiesIpAddress2 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.36 | IpAddress | RO | obsolete |
column · IpAddress · read-only · obsolete MTCE interface index 2 - IP address. AC INI-Param: MtcEntities_IpAddressB | ||||
| CacMediaTranscodingClusterEntitiesIpAddress3 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.37 | IpAddress | RO | obsolete |
column · IpAddress · read-only · obsolete MTCE interface index 3 - IP address. AC INI-Param: MtcEntities_IpAddressC | ||||
| CacMediaTranscodingClusterEntitiesIpAddress4 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.38 | IpAddress | RO | obsolete |
column · IpAddress · read-only · obsolete MTCE interface index 4 - IP address. AC INI-Param: MtcEntities_IpAddressD | ||||
| CacMediaTranscodingClusterEntitiesVlanId1 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.39 | SnmpAdminString (SIZE (0..24)) | RO | obsolete |
column · SnmpAdminString (SIZE (0..24)) · read-only · obsolete MTCE interface index 1 - Vlan ID. AC INI-Param: MtcEntities_VlanIdA | ||||
| CacMediaTranscodingClusterEntitiesVlanId2 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.40 | SnmpAdminString (SIZE (0..24)) | RO | obsolete |
column · SnmpAdminString (SIZE (0..24)) · read-only · obsolete MTCE interface index 2 - Vlan ID. AC INI-Param: MtcEntities_VlanIdB | ||||
| CacMediaTranscodingClusterEntitiesVlanId3 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.41 | SnmpAdminString (SIZE (0..24)) | RO | obsolete |
column · SnmpAdminString (SIZE (0..24)) · read-only · obsolete MTCE interface index 3 - Vlan ID. AC INI-Param: MtcEntities_VlanIdC | ||||
| CacMediaTranscodingClusterEntitiesVlanId4 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.42 | SnmpAdminString (SIZE (0..24)) | RO | obsolete |
column · SnmpAdminString (SIZE (0..24)) · read-only · obsolete MTCE interface index 4 - Vlan ID. AC INI-Param: MtcEntities_VlanIdD | ||||
| CacMediaTranscodingClusterEntitiesGroupName1 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.43 | SnmpAdminString (SIZE (0..15)) | RO | obsolete |
column · SnmpAdminString (SIZE (0..15)) · read-only · obsolete MTCE group index 1 - group name. AC INI-Param: MtcEntities_GroupNameA | ||||
| CacMediaTranscodingClusterEntitiesGroupName2 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.44 | SnmpAdminString (SIZE (0..15)) | RO | obsolete |
column · SnmpAdminString (SIZE (0..15)) · read-only · obsolete MTCE group index 2 - group name. AC INI-Param: MtcEntities_GroupNameB | ||||
| CacMediaTranscodingClusterEntitiesGroupName3 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.45 | SnmpAdminString (SIZE (0..15)) | RO | obsolete |
column · SnmpAdminString (SIZE (0..15)) · read-only · obsolete MTCE group index 3 - group name. AC INI-Param: MtcEntities_GroupNameC | ||||
| CacMediaTranscodingClusterEntitiesGroupName4 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.46 | SnmpAdminString (SIZE (0..15)) | RO | obsolete |
column · SnmpAdminString (SIZE (0..15)) · read-only · obsolete MTCE group index 4 - group name. AC INI-Param: MtcEntities_GroupNameD | ||||
| CacMediaTranscodingClusterEntitiesGroupStatus1 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.47 | INTEGER | RO | obsolete |
column · INTEGER · read-only · obsolete MTCE group index 1 - group status. AC INI-Param: MtcEntities_GroupStatusA
| ||||
| CacMediaTranscodingClusterEntitiesGroupStatus2 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.48 | INTEGER | RO | obsolete |
column · INTEGER · read-only · obsolete MTCE group index 2 - group status. AC INI-Param: MtcEntities_GroupStatusB
| ||||
| CacMediaTranscodingClusterEntitiesGroupStatus3 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.49 | INTEGER | RO | obsolete |
column · INTEGER · read-only · obsolete MTCE group index 3 - group status. AC INI-Param: MtcEntities_GroupStatusC
| ||||
| CacMediaTranscodingClusterEntitiesGroupStatus4 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.50 | INTEGER | RO | obsolete |
column · INTEGER · read-only · obsolete MTCE group index 4 - group status. AC INI-Param: MtcEntities_GroupStatusD
| ||||
| CacMediaTranscodingClusterEntitiesFirstGroupMember1 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.51 | SnmpAdminString (SIZE (0..32)) | RO | obsolete |
column · SnmpAdminString (SIZE (0..32)) · read-only · obsolete MTCE group index 1 - group member 1. AC INI-Param: MtcEntities_GroupMember1A | ||||
| CacMediaTranscodingClusterEntitiesFirstGroupMember2 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.52 | SnmpAdminString (SIZE (0..32)) | RO | obsolete |
column · SnmpAdminString (SIZE (0..32)) · read-only · obsolete MTCE group index 2 - group member 1. AC INI-Param: MtcEntities_GroupMember1B | ||||
| CacMediaTranscodingClusterEntitiesFirstGroupMember3 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.53 | SnmpAdminString (SIZE (0..32)) | RO | obsolete |
column · SnmpAdminString (SIZE (0..32)) · read-only · obsolete MTCE group index 3 - group member 1. AC INI-Param: MtcEntities_GroupMember1C | ||||
| CacMediaTranscodingClusterEntitiesFirstGroupMember4 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.54 | SnmpAdminString (SIZE (0..32)) | RO | obsolete |
column · SnmpAdminString (SIZE (0..32)) · read-only · obsolete MTCE group index 4 - group member 1. AC INI-Param: MtcEntities_GroupMember1D | ||||
| CacMediaTranscodingClusterEntitiesSecondGroupMember1 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.55 | SnmpAdminString (SIZE (0..32)) | RO | obsolete |
column · SnmpAdminString (SIZE (0..32)) · read-only · obsolete MTCE group index 1 - group member 2. AC INI-Param: MtcEntities_GroupMember2A | ||||
| CacMediaTranscodingClusterEntitiesSecondGroupMember2 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.56 | SnmpAdminString (SIZE (0..32)) | RO | obsolete |
column · SnmpAdminString (SIZE (0..32)) · read-only · obsolete MTCE group index 2 - group member 2. AC INI-Param: MtcEntities_GroupMember2B | ||||
| CacMediaTranscodingClusterEntitiesSecondGroupMember3 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.57 | SnmpAdminString (SIZE (0..32)) | RO | obsolete |
column · SnmpAdminString (SIZE (0..32)) · read-only · obsolete MTCE group index 3 - group member 2. AC INI-Param: MtcEntities_GroupMember2C | ||||
| CacMediaTranscodingClusterEntitiesSecondGroupMember4 | 1.3.6.1.4.1.5003.9.10.4.1.16.21.1.1.58 | SnmpAdminString (SIZE (0..32)) | RO | obsolete |
column · SnmpAdminString (SIZE (0..32)) · read-only · obsolete MTCE group index 4 - group member 2. AC INI-Param: MtcEntities_GroupMember2D | ||||
| NacMediaStatus | 1.3.6.1.4.1.5003.9.10.4.2 | |||
| NacIPLegs | 1.3.6.1.4.1.5003.9.10.4.2.1 | |||
| TacIPLegsTable | 1.3.6.1.4.1.5003.9.10.4.2.1.1 | NA | ||
| RacIPLegsEntry | 1.3.6.1.4.1.5003.9.10.4.2.1.1.1 | NA | ||
row · not-accessible · current
| ||||
| CacIPLegsLegIndex | 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.1 | Unsigned32 (0..5000) | NA | |
column · Unsigned32 (0..5000) · not-accessible · current Describes Rtp Endpoint In A Specific Call. AC INI-Param: N/A | ||||
| CacIPLegsCallIndex | 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.2 | Unsigned32 (0..5000) | RO | |
column · Unsigned32 (0..5000) · read-only · current Decribes The Call which The Rtp EndPoint Participant In It. AC INI-Param: N/A | ||||
| CacIPLegsRTPActive | 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current Decribes whether the RTP is active or not. AC INI-Param: N/A
| ||||
| CacIPLegsCoderType | 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.4 | INTEGER | RO | |
column · INTEGER · read-only · current describes the coder Type. AC INI-Param: N/A
| ||||
| CacIPLegsSilenceCompression | 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current Enables or Disables the Silence Compression. AC INI-Param: N/A
| ||||
| CacIPLegsDTMFDetection | 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.6 | INTEGER | RO | |
column · INTEGER · read-only · current Enables or Disables the DTMF Detection. AC INI-Param: N/A
| ||||
| CacIPLegsLocalRTPPort | 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.7 | Unsigned32 (0..20000) | RO | |
column · Unsigned32 (0..20000) · read-only · current Describes the RTP port of the Leg. AC INI-Param: N/A | ||||
| CacIPLegsRemoteRTPAddress | 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.8 | IpAddress | RO | deprecated |
column · IpAddress · read-only · deprecated Describes the RTP address. AC INI-Param: N/A | ||||
| CacIPLegsFaxTransportType | 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current Describes the Fax transfor Type currently working. AC INI-Param: N/A
| ||||
| CacIPLegsRxPackets | 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.10 | Unsigned32 (0..2147483647) | RO | |
column · Unsigned32 (0..2147483647) · read-only · current Describes the received packets on the Leg. AC INI-Param: N/A | ||||
| CacIPLegsTxPackets | 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.11 | Unsigned32 (0..2147483647) | RO | |
column · Unsigned32 (0..2147483647) · read-only · current Describes the Transmitted packets on the Leg. AC INI-Param: N/A | ||||
| CacIPLegsRxBytes | 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.12 | Unsigned32 (0..2147483647) | RO | |
column · Unsigned32 (0..2147483647) · read-only · current Describes the received Bytes on the Leg. AC INI-Param: N/A | ||||
| CacIPLegsTxBytes | 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.13 | Unsigned32 (0..2147483647) | RO | |
column · Unsigned32 (0..2147483647) · read-only · current Describes the Transmitted packets on the Leg. AC INI-Param: N/A | ||||
| CacIPLegsJitter | 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.14 | Unsigned32 (0..2147483647) | RO | |
column · Unsigned32 (0..2147483647) · read-only · current Describes the Jitter on the Leg. AC INI-Param: N/A | ||||
| CacIPLegsPacketLoss | 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.15 | Unsigned32 (0..2147483647) | RO | |
column · Unsigned32 (0..2147483647) · read-only · current Describes the Lost packets on the Leg. AC INI-Param: N/A | ||||
| CacIPLegsSSRCOfSender | 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.16 | Unsigned32 (0..2147483647) | RO | |
column · Unsigned32 (0..2147483647) · read-only · current Describes the SSRC Of the Sender. AC INI-Param: N/A | ||||
| CacIPLegsDSPDevice | 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.17 | Unsigned32 (0..2000) | RO | |
column · Unsigned32 (0..2000) · read-only · current Describes the DSP Device Of the Leg. AC INI-Param: N/A | ||||
| CacIPLegsLegName | 1.3.6.1.4.1.5003.9.10.4.2.1.1.1.18 | SnmpAdminString (SIZE (0..64)) | RO | |
column · SnmpAdminString (SIZE (0..64)) · read-only · current Describes the Leg Name as in the Control Protocol. AC INI-Param: N/A | ||||