AC-ANALOG-MIB
AudioCodes LTDsnmptranslate -m AC-ANALOG-MIB -Tpsnmpwalk -v2c -c <community> -m AC-ANALOG-MIB <host> 1.3.6.1.4.1.5003.9.10.8Imports
| AUDIOCODES-TYPES-MIB | acBoardMibs, acGeneric, acProducts, acRegistrations, audioCodes |
|---|---|
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, TAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IacAnalog | 1.3.6.1.4.1.5003.9.10.8 | ||||||||||||
| NacAnalogConfiguration | 1.3.6.1.4.1.5003.9.10.8.1 | ||||||||||||
| NacAnalogConfig | 1.3.6.1.4.1.5003.9.10.8.1.1 | ||||||||||||
| NacAnalogMisc | 1.3.6.1.4.1.5003.9.10.8.1.1.1 | ||||||||||||
| SacAnalogMiscCurrentDisconnectDuration | 1.3.6.1.4.1.5003.9.10.8.1.1.1.1 | Unsigned32 (200..1500) | RW | ||||||||||
scalar · Unsigned32 (200..1500) · read-write · current Defines the current-disconnect duration (in msec). This value is used in generation and detection. Access: Offline. AC INI-Param: CurrentDisconnectDuration | |||||||||||||
| SacAnalogMiscFlashHookPeriod | 1.3.6.1.4.1.5003.9.10.8.1.1.1.2 | Unsigned32 (25..3000) | RW | ||||||||||
scalar · Unsigned32 (25..3000) · read-write · current Defines the flashhook period (in msec) for both analog and IP sides. For the analog side it defines: - The maximal hook-flash detection period (for FXS gateways). A longer signal is considered offhook / onhook event. - The hook-flash generation period (for FXO gateways). For the IP side it defines the flash-hook period that is reported to IP. The valid range is 25 to 1500. The default value is 700 msec. Note: For FXO gateways, a constant of 90 msec must be added to the required hook-flash period. For example, to generate a 450 msec hook-flash, set FlashHookPeriod to 540. . Access: Instant. AC INI-Param: FLASHHOOKPERIOD | |||||||||||||
| SacAnalogMiscGroundKeyDetection | 1.3.6.1.4.1.5003.9.10.8.1.1.1.3 | INTEGER | RW | deprecated | |||||||||
scalar · INTEGER · read-write · deprecated Enables/disables the analog ground key detection. 0 = Disable 1= Enable. Access: Offline. AC INI-Param: GroundKeyDetection
| |||||||||||||
| TacAnalogGroundStartTable | 1.3.6.1.4.1.5003.9.10.8.1.1.1.21 | NA | |||||||||||
| RacAnalogGroundStartEntry | 1.3.6.1.4.1.5003.9.10.8.1.1.1.21.1 | NA | |||||||||||
row · not-accessible · current | |||||||||||||
| CacAnalogGroundStartPort | 1.3.6.1.4.1.5003.9.10.8.1.1.1.21.1.1 | Unsigned32 (0..23) | RO | ||||||||||
column · Unsigned32 (0..23) · read-only · current Port index. AC INI-Param: N/A | |||||||||||||
| CacAnalogGroundStartEnable | 1.3.6.1.4.1.5003.9.10.8.1.1.1.21.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Enables/disables the analog port ground start. Access: Offline. AC INI-Param: GroundKeyDetection
| |||||||||||||
| NacAuxiliaryFiles | 1.3.6.1.4.1.5003.9.10.8.1.1.2 | ||||||||||||
| SacAuxiliaryFilesFxsCoefficients | 1.3.6.1.4.1.5003.9.10.8.1.1.2.1 | SnmpAdminString (SIZE (0..47)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..47)) · read-only · current Defines the FXS loop coefficient filename. Max. 47 characters. AC INI-Param: FXSCOEFFILENAME | |||||||||||||
| SacAuxiliaryFilesFxoCoefficients | 1.3.6.1.4.1.5003.9.10.8.1.1.2.2 | SnmpAdminString (SIZE (0..47)) | RO | ||||||||||
scalar · SnmpAdminString (SIZE (0..47)) · read-only · current Defines the FXO loop coefficient filename. AC INI-Param: FXOCOEFFILENAME | |||||||||||||
| NacAnalogFxoConfig | 1.3.6.1.4.1.5003.9.10.8.1.2 | ||||||||||||
| NacAnalogFxo | 1.3.6.1.4.1.5003.9.10.8.1.2.1 | ||||||||||||
| SacAnalogFxoFarEndDisconnectType | 1.3.6.1.4.1.5003.9.10.8.1.2.1.1 | Unsigned32 (0..128) | RW | ||||||||||
scalar · Unsigned32 (0..128) · read-write · current This parameter sets the source for the acEV_FAR_END_DISCONNECTED event (or for the relevant control protocol event). It is a bit field parameter, hence (for example) if both CPT and current disconnect are required, the parameter should be set to 5. FarDisconnect contributor: 1 = CPT 2 = PolarityReversal 4 = CurrentDisconnect 8 = Silence. Access: Offline. AC INI-Param: FARENDDISCONNECTTYPE | |||||||||||||
| SacAnalogFxoCountryCoefficients | 1.3.6.1.4.1.5003.9.10.8.1.2.1.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Allows the user to modify the line characteristic (AC and DC) according to country. Access: Offline. AC INI-Param: CountryCoefficients
| |||||||||||||
| SacAnalogFxoDCRemover | 1.3.6.1.4.1.5003.9.10.8.1.2.1.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Determines whether to enable the analog DC remover in the DAA. One of the following values: 0 = DC remover is disabled 1 = DC remover is enabled. Access: Offline. AC INI-Param: EnableAnalogDCRemover
| |||||||||||||
| SacAnalogFxoDefaultLinePolarityState | 1.3.6.1.4.1.5003.9.10.8.1.2.1.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Sets the TTX pulses voltage level. 0 = 0Vrms sinusoidal bursts 1 = 0.5Vrms sinusoidal bursts 2 = 1Vrms sinusoidal bursts. Access: Offline. AC INI-Param: SetDefaultLinePolarityState
| |||||||||||||
| SacAnalogFxoTxGainControl | 1.3.6.1.4.1.5003.9.10.8.1.2.1.5 | Integer32 (-15..12) | RW | ||||||||||
scalar · Integer32 (-15..12) · read-write · current Sets gain\attenuation of the FXO Tx path between -15db and 12db. default no gain. Access: Offline. AC INI-Param: FXOTxGainControl | |||||||||||||
| SacAnalogFxoRxGainControl | 1.3.6.1.4.1.5003.9.10.8.1.2.1.6 | Integer32 (-15..12) | RW | ||||||||||
scalar · Integer32 (-15..12) · read-write · current Sets gain\attenuation of the FXO Rx path between -15db and 12db. default no gain. Access: Offline. AC INI-Param: FXORxGainControl | |||||||||||||
| TacAnalogFxoFarEndDisconnectToneTable | 1.3.6.1.4.1.5003.9.10.8.1.2.1.21 | NA | |||||||||||
| RacAnalogFxoFarEndDisconnectToneEntry | 1.3.6.1.4.1.5003.9.10.8.1.2.1.21.1 | NA | |||||||||||
row · not-accessible · current | |||||||||||||
| CacAnalogFxoFarEndDisconnectToneRowStatus | 1.3.6.1.4.1.5003.9.10.8.1.2.1.21.1.1 | Unsigned32 (1) | RW | ||||||||||
column · Unsigned32 (1) · read-write · current Far End Disconnect table row-status. AC INI-Param: N/A | |||||||||||||
| CacAnalogFxoFarEndDisconnectToneAction | 1.3.6.1.4.1.5003.9.10.8.1.2.1.21.1.2 | Unsigned32 (0) | RW | ||||||||||
column · Unsigned32 (0) · read-write · current Far End Disconnect table action. AC INI-Param: N/A | |||||||||||||
| CacAnalogFxoFarEndDisconnectToneActionResult | 1.3.6.1.4.1.5003.9.10.8.1.2.1.21.1.3 | Unsigned32 (0) | RO | ||||||||||
column · Unsigned32 (0) · read-only · current Far End Disconnect table result. AC INI-Param: N/A | |||||||||||||
| CacAnalogFxoFarEndDisconnectToneIndex | 1.3.6.1.4.1.5003.9.10.8.1.2.1.21.1.4 | Unsigned32 (0..4) | RO | ||||||||||
column · Unsigned32 (0..4) · read-only · current Index for table use. AC INI-Param: N/A | |||||||||||||
| CacAnalogFxoFarEndDisconnectToneType | 1.3.6.1.4.1.5003.9.10.8.1.2.1.21.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Defines which CPT types are detected as far-end disconnect. The CPT type is based on the acTCallProgressToneType enum. This is valid when FarEndDisconnectType allows CPT detection. Range = An array of up to 4 tone types. Access: Offline. AC INI-Param: DISCONNECTTONETYPE
| |||||||||||||
| NacAnalogFxsConfig | 1.3.6.1.4.1.5003.9.10.8.1.3 | ||||||||||||
| NacAnalogFxs | 1.3.6.1.4.1.5003.9.10.8.1.3.1 | ||||||||||||
| SacAnalogFxsPolarityReversalType | 1.3.6.1.4.1.5003.9.10.8.1.3.1.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Sets the type of the polarity reversal signal used for the network far-end answer and disconnect indications. Smooth reversal prevents negative effects as non-required ringing. 0 = Soft reverse polarity 1 = Hard reverse polarity. Access: Offline. AC INI-Param: POLARITYREVERSALTYPE
| |||||||||||||
| SacAnalogFxsMeteringType | 1.3.6.1.4.1.5003.9.10.8.1.3.1.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Sets the metering method for charging pulses. 0 = 12 kHz sinusoidal bursts 1 = 16 kHz sinusoidal bursts 2 = Polarity Reversal pulses. Access: Offline. AC INI-Param: METERINGTYPE
| |||||||||||||
| SacAnalogFxsLifeLineType | 1.3.6.1.4.1.5003.9.10.8.1.3.1.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Defines the Lifeline phone type. The Lifeline phone is available (for FXS only) on port 4 in MP-104 and MP-108, on port 2 in MP-102, on ports 1-4 in the MP-118, and on port 2 of each analog module in the Mediant 1000. 0 = activate Lifeline phone on power down 1 = activate Lifeline phone on power down or on detection of LAN disconnect 2 = activate Lifeline phone on power down, or on detection of LAN disconnect, or on loss of ping. Access: Offline. AC INI-Param: LIFELINETYPE
| |||||||||||||
| SacAnalogFxsMinFlashHookTime | 1.3.6.1.4.1.5003.9.10.8.1.3.1.4 | Unsigned32 (25..300) | RW | ||||||||||
scalar · Unsigned32 (25..300) · read-write · current Sets the minimal time (in msec) for detection of a flash-hook event (for FXS only). The valid range is 25 to 300. The default value is 300 msec. Detection is guaranteed for flash hook periods of at least 60 msec (when setting the minimal time to 25). Flash-hook signals that last a shorter period of time are ignored. Note: It is recommended to reduce the detection time by 50 msec from the desired value (e.g. if you set the value as 200 msec, then enter 150 msec, i.e. 200 minus 50). . Access: Offline. AC INI-Param: MINFLASHHOOKTIME | |||||||||||||
| SacAnalogFxsCallerIDTimingMode | 1.3.6.1.4.1.5003.9.10.8.1.3.1.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Defines the Analog CallerID Timing Mode. 0 = CallerID transferred between first and second rings 1 = CallerID transferred on valid Off ring. Access: Offline. AC INI-Param: ANALOGCALLERIDTIMINGMODE
| |||||||||||||
| SacAnalogFxsBellcoreCallerIDTypeOneSubStandard | 1.3.6.1.4.1.5003.9.10.8.1.3.1.6 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Selects the sub-standard of the Bellcore Caller ID type. 0 = Between_Rings 1 = Not_Ring_Related 2 = Before_Ring_RP_AS. Access: Offline. AC INI-Param: BellcoreCallerIDTypeOneSubStandard
| |||||||||||||
| SacAnalogFxsETSICallerIDTypeOneSubStandard | 1.3.6.1.4.1.5003.9.10.8.1.3.1.7 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Selects the number denoting the ETSI CallerID Type 1 sub-standard. Either: 0 = ETSI_Between_Rings 1 = ETSI_Before_Ring_DT_AS 2 = ETSI_Before_Ring_RP_AS 3 = ETSI_Before_Ring_LR_DT_AS 4 = ETSI_Not_Ring_Related_DT_AS 5 = ETSI_Not_Ring_Related_RP_AS 6 = ETSI_Not_Ring_Related_LR_DT_AS. Access: Offline. AC INI-Param: ETSICallerIDTypeOneSubStandard
| |||||||||||||
| SacAnalogFxsETSIVMWITypeOneStandard | 1.3.6.1.4.1.5003.9.10.8.1.3.1.8 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Selects the number denoting the ETSI VMWI Type 1 Standard. Choose: 0 = ETSI_VMWI_Between_Rings 1 = ETSI_VMWI_Before_Ring_DT_AS 2 = ETSI_VMWI_Before_Ring_RP_AS 3 = ETSI_VMWI_Before_Ring_LR_DT_AS 4 = ETSI_VMWI_Not_Ring_Related_DT_AS 5 = ETSI_VMWI_Not_Ring_Related_RP_AS 6 = ETSI_VMWI_Not_Ring_Related_LR_DT_AS. Access: Offline. AC INI-Param: ETSIVMWITypeOneStandard
| |||||||||||||
| SacAnalogFxsBellcoreVMWITypeOneStandard | 1.3.6.1.4.1.5003.9.10.8.1.3.1.9 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Use this parameter to select the Bellcore VMWI standard. 0 - Between_Rings 1 - Not_Ring_Related. Access: Offline. AC INI-Param: BellcoreVMWITypeOneStandard
| |||||||||||||
| SacAnalogFxsDisableAutoCalibration | 1.3.6.1.4.1.5003.9.10.8.1.3.1.10 | Unsigned32 | RW | ||||||||||
scalar · Unsigned32 · read-write · current Determines whether to enable the analog Autocalibration in the DAA. One of the following values: 0 = Auto calibration is enabled 1 = Auto calibration is disabled. Access: Offline. AC INI-Param: DisableAnalogAutoCalibration | |||||||||||||
| SacAnalogFxsExternalLifeLinePorts | 1.3.6.1.4.1.5003.9.10.8.1.3.1.11 | Unsigned32 (0..24) | RW | ||||||||||
scalar · Unsigned32 (0..24) · read-write · current Set the amount of FXS ports which will be connected to an external life line and will be disabled (max value is half of the FXS ports). Access: Offline. AC INI-Param: ExternalLifeLinePorts | |||||||||||||
| SacAnalogFxsCountryCoefficients | 1.3.6.1.4.1.5003.9.10.8.1.3.1.12 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Allows the user to modify the line characteristic (AC and DC) according to country. Access: Offline. AC INI-Param: FXSCountryCoefficients
| |||||||||||||
| SacAnalogFxsTTXVoltageLevel | 1.3.6.1.4.1.5003.9.10.8.1.3.1.13 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Sets the TTX pulses voltage level. 0 = 0Vrms sinusoidal bursts 1 = 0.5Vrms sinusoidal bursts 2 = 1Vrms sinusoidal bursts -1 = notAvailable. Access: Offline. AC INI-Param: AnalogTTXVoltageLevel
| |||||||||||||
| NacAnalogEMConfig | 1.3.6.1.4.1.5003.9.10.8.1.4 | ||||||||||||
| NacAnalogEM | 1.3.6.1.4.1.5003.9.10.8.1.4.1 | ||||||||||||
| SacAnalogEMVoiceType | 1.3.6.1.4.1.5003.9.10.8.1.4.1.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current E&M Voice Configuration Type 2 or 4 wire. Access: Offline. AC INI-Param: EnMVoiceType
| |||||||||||||
| SacAnalogEMInterfaceType | 1.3.6.1.4.1.5003.9.10.8.1.4.1.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current E&M Signaling Type - Trunking or Signaling. Access: Offline. AC INI-Param: EnMSystemType
| |||||||||||||
| SacAnalogEMSignalingType | 1.3.6.1.4.1.5003.9.10.8.1.4.1.3 | Unsigned32 (1..5) | RW | ||||||||||
scalar · Unsigned32 (1..5) · read-write · current Set E&M standatd signaling types are described in TIA/EIA-464C. Access: Offline. AC INI-Param: EnMSignalingType | |||||||||||||
| SacAnalogEMPortRXGain | 1.3.6.1.4.1.5003.9.10.8.1.4.1.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Rx Gain. Access: Offline. AC INI-Param: EnMPortRXGain
| |||||||||||||
| SacAnalogEMPortTXGain | 1.3.6.1.4.1.5003.9.10.8.1.4.1.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Tx Gain. Access: Offline. AC INI-Param: EnMPortTXGain
| |||||||||||||
| SacAnalogEMCountryCoefficients | 1.3.6.1.4.1.5003.9.10.8.1.4.1.6 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current E&M Country Coefficients. Access: Offline. AC INI-Param: EnMCountryCoefficients
| |||||||||||||
| SacAnalogEMHookDebounceTiming | 1.3.6.1.4.1.5003.9.10.8.1.4.1.7 | Unsigned32 (30..150) | RW | ||||||||||
scalar · Unsigned32 (30..150) · read-write · current Sets the on E&M hook detection debounce timing. Access: Offline. AC INI-Param: EnMhookDebounceTiming | |||||||||||||
| SacAnalogEMOffHookGlareEnable | 1.3.6.1.4.1.5003.9.10.8.1.4.1.8 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Protect the EnM port from Rx and Tx hook collision. Access: Offline. AC INI-Param: EnMOffHookGlareEnable
| |||||||||||||
| NacAnalogStatus | 1.3.6.1.4.1.5003.9.10.8.2 | ||||||||||||
| NacAnalogStatusMisc | 1.3.6.1.4.1.5003.9.10.8.2.1 | ||||||||||||
| SacAnalogStatusMiscFxsOrFxo | 1.3.6.1.4.1.5003.9.10.8.2.1.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Board is Fxs,Fxo, FXS_FXO or E&M. AC INI-Param: N/A
| |||||||||||||
| SacAnalogStatusMiscBoardTemperature | 1.3.6.1.4.1.5003.9.10.8.2.1.2 | Unsigned32 (0..100) | RO | ||||||||||
scalar · Unsigned32 (0..100) · read-only · current Temperature of the board in degrees Celsius, should not go higher then 60!. AC INI-Param: N/A | |||||||||||||
| SacAnalogStatusMiscAnalogChannelsCount | 1.3.6.1.4.1.5003.9.10.8.2.1.3 | Unsigned32 (0..5000) | RO | ||||||||||
scalar · Unsigned32 (0..5000) · read-only · current Number of the Analog channels in the board. AC INI-Param: N/A | |||||||||||||
| NacAnalogFxsFxo | 1.3.6.1.4.1.5003.9.10.8.2.20 | ||||||||||||
| TacAnalogFxsFxoTable | 1.3.6.1.4.1.5003.9.10.8.2.20.1 | NA | |||||||||||
| RacAnalogFxsFxoEntry | 1.3.6.1.4.1.5003.9.10.8.2.20.1.1 | NA | |||||||||||
row · not-accessible · current
| |||||||||||||
| CacAnalogFxsFxoIndex | 1.3.6.1.4.1.5003.9.10.8.2.20.1.1.1 | Unsigned32 (0..288) | NA | ||||||||||
column · Unsigned32 (0..288) · not-accessible · current Index for table use. AC INI-Param: N/A | |||||||||||||
| CacAnalogFxsFxoType | 1.3.6.1.4.1.5003.9.10.8.2.20.1.1.2 | INTEGER | RO | fXS(1) | |||||||||
column · INTEGER · read-only · current Line is Fxs, Fxo or E&M. AC INI-Param: N/A
Example values from LibreNMS test devices
| |||||||||||||
| CacAnalogFxsFxoChipRevNum | 1.3.6.1.4.1.5003.9.10.8.2.20.1.1.3 | Unsigned32 (0..2147483647) | RO | 20 | |||||||||
column · Unsigned32 (0..2147483647) · read-only · current Fxs/Fxo's Chip revision number. AC INI-Param: N/A Example values from LibreNMS test devices
| |||||||||||||
| CacAnalogFxsFxoHookState | 1.3.6.1.4.1.5003.9.10.8.2.20.1.1.4 | INTEGER | RO | onHookState(1) | |||||||||
column · INTEGER · read-only · current The hook state of the analog line. AC INI-Param: N/A
Example values from LibreNMS test devices
| |||||||||||||
| NacAnalogLegs | 1.3.6.1.4.1.5003.9.10.8.2.21 | ||||||||||||
| TacAnalogLegsTable | 1.3.6.1.4.1.5003.9.10.8.2.21.1 | NA | |||||||||||
| RacAnalogLegsEntry | 1.3.6.1.4.1.5003.9.10.8.2.21.1.1 | NA | |||||||||||
row · not-accessible · current
| |||||||||||||
| CacAnalogLegsLegIndex | 1.3.6.1.4.1.5003.9.10.8.2.21.1.1.1 | Unsigned32 (0..5000) | NA | ||||||||||
column · Unsigned32 (0..5000) · not-accessible · current Decribes The Digital EndPoint In A Call. AC INI-Param: N/A | |||||||||||||
| CacAnalogLegsCallIndex | 1.3.6.1.4.1.5003.9.10.8.2.21.1.1.2 | Unsigned32 (0..5000) | RO | ||||||||||
column · Unsigned32 (0..5000) · read-only · current Decribes The Call which The Rtp EndPoint Participant In It. AC INI-Param: N/A | |||||||||||||
| CacAnalogLegsAnalogType | 1.3.6.1.4.1.5003.9.10.8.2.21.1.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Describs whether the board is FXS or FXO. AC INI-Param: N/A
| |||||||||||||
| CacAnalogLegsEchoCanceller | 1.3.6.1.4.1.5003.9.10.8.2.21.1.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Enables or Disables the Echo Canceller. AC INI-Param: N/A
| |||||||||||||
| CacAnalogLegsHighPassFilter | 1.3.6.1.4.1.5003.9.10.8.2.21.1.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Enables or Disables theHigh Pass Filter. AC INI-Param: N/A
| |||||||||||||
| CacAnalogLegsDTMFDetection | 1.3.6.1.4.1.5003.9.10.8.2.21.1.1.6 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Enables or Disables the DTMF Detection. AC INI-Param: N/A
| |||||||||||||
| CacAnalogLegsVoiceVolume | 1.3.6.1.4.1.5003.9.10.8.2.21.1.1.7 | Unsigned32 (0..20000) | RO | ||||||||||
column · Unsigned32 (0..20000) · read-only · current Describs the volume of the voice in dB. AC INI-Param: N/A | |||||||||||||
| CacAnalogLegsInputGain | 1.3.6.1.4.1.5003.9.10.8.2.21.1.1.8 | Unsigned32 (0..20000) | RO | ||||||||||
column · Unsigned32 (0..20000) · read-only · current Describes the Input Gain on the leg in dB. AC INI-Param: N/A | |||||||||||||
| CacAnalogLegsLegName | 1.3.6.1.4.1.5003.9.10.8.2.21.1.1.9 | SnmpAdminString (SIZE (0..64)) | RO | ||||||||||
column · SnmpAdminString (SIZE (0..64)) · read-only · current Describes the Leg Name as in the Control Protocol. AC INI-Param: N/A | |||||||||||||
| NacAnalogAction | 1.3.6.1.4.1.5003.9.10.8.3 | ||||||||||||
| NacAnalogFxoAction | 1.3.6.1.4.1.5003.9.10.8.3.1 | ||||||||||||
| TacAnalogFxoLineTestTable | 1.3.6.1.4.1.5003.9.10.8.3.1.1 | NA | |||||||||||
| RacAnalogFxoLineTestEntry | 1.3.6.1.4.1.5003.9.10.8.3.1.1.1 | NA | |||||||||||
row · not-accessible · current | |||||||||||||
| CacAnalogFxoLineTestIndex | 1.3.6.1.4.1.5003.9.10.8.3.1.1.1.1 | Unsigned32 (0..24) | NA | ||||||||||
column · Unsigned32 (0..24) · not-accessible · current Index for table use. AC INI-Param: N/A | |||||||||||||
| CacAnalogFxoLineTestActivate | 1.3.6.1.4.1.5003.9.10.8.3.1.1.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Activate line testing in an FXO analog line according to a given line-index. AC INI-Param: N/A
| |||||||||||||
| CacAnalogFxoLineTestHookState | 1.3.6.1.4.1.5003.9.10.8.3.1.1.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The hook state of the analog line. AC INI-Param: N/A
| |||||||||||||
| CacAnalogFxoLineTestPolarityStatus | 1.3.6.1.4.1.5003.9.10.8.3.1.1.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The line's polarity state. AC INI-Param: N/A
| |||||||||||||
| CacAnalogFxoLineTestLineConnectionStatus | 1.3.6.1.4.1.5003.9.10.8.3.1.1.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The connection's status of the line. AC INI-Param: N/A
| |||||||||||||
| CacAnalogFxoLineTestLineCurrent | 1.3.6.1.4.1.5003.9.10.8.3.1.1.1.6 | Integer32 (-1..24) | RO | ||||||||||
column · Integer32 (-1..24) · read-only · current The line's current [ma]. AC INI-Param: N/A | |||||||||||||
| CacAnalogFxoLineTestLineVoltage | 1.3.6.1.4.1.5003.9.10.8.3.1.1.1.7 | Integer32 (-128..128) | RO | ||||||||||
column · Integer32 (-128..128) · read-only · current The line's voltage [V]. AC INI-Param: N/A | |||||||||||||
| CacAnalogFxoLineTestRingState | 1.3.6.1.4.1.5003.9.10.8.3.1.1.1.8 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The Ring's State. AC INI-Param: N/A
| |||||||||||||
| CacAnalogFxoLineTestLinePolarity | 1.3.6.1.4.1.5003.9.10.8.3.1.1.1.9 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The line's polarity state. AC INI-Param: N/A
| |||||||||||||
| CacAnalogFxoLineTestMwiState | 1.3.6.1.4.1.5003.9.10.8.3.1.1.1.10 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Mwi's state. AC INI-Param: N/A
| |||||||||||||
| CacAnalogFxoLineTestLastCurrentDisconnectDuration | 1.3.6.1.4.1.5003.9.10.8.3.1.1.1.11 | Unsigned32 (0..2147483647) | RO | ||||||||||
column · Unsigned32 (0..2147483647) · read-only · current Last current disconnect duration in msec. AC INI-Param: N/A | |||||||||||||
| NacAnalogFxsAction | 1.3.6.1.4.1.5003.9.10.8.3.2 | ||||||||||||
| TacAnalogFxsLineTestTable | 1.3.6.1.4.1.5003.9.10.8.3.2.1 | NA | |||||||||||
| RacAnalogFxsLineTestEntry | 1.3.6.1.4.1.5003.9.10.8.3.2.1.1 | NA | |||||||||||
row · not-accessible · current | |||||||||||||
| CacAnalogFxsLineTestIndex | 1.3.6.1.4.1.5003.9.10.8.3.2.1.1.1 | Unsigned32 (0..288) | NA | ||||||||||
column · Unsigned32 (0..288) · not-accessible · current Index for table use. AC INI-Param: N/A | |||||||||||||
| CacAnalogFxsLineTestActivate | 1.3.6.1.4.1.5003.9.10.8.3.2.1.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Activate line testing in a FXS analog line according to a given line-index. AC INI-Param: N/A
| |||||||||||||
| CacAnalogFxsLineTestHookState | 1.3.6.1.4.1.5003.9.10.8.3.2.1.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The hook state of the analog line. AC INI-Param: N/A
| |||||||||||||
| CacAnalogFxsLineTestRingState | 1.3.6.1.4.1.5003.9.10.8.3.2.1.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Line's ring state. AC INI-Param: N/A
| |||||||||||||
| CacAnalogFxsLineTestPolarityStatus | 1.3.6.1.4.1.5003.9.10.8.3.2.1.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Line's reversal-polarity. AC INI-Param: N/A
| |||||||||||||
| CacAnalogFxsLineTestMessageWaitingIndication | 1.3.6.1.4.1.5003.9.10.8.3.2.1.1.6 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Line's messgae waiting indication state. AC INI-Param: N/A
| |||||||||||||
| CacAnalogFxsLineTestLineCurrentReading | 1.3.6.1.4.1.5003.9.10.8.3.2.1.1.7 | Unsigned32 (0..3000) | RO | obsolete | |||||||||
column · Unsigned32 (0..3000) · read-only · obsolete The Line current reading in 10ua units. This test is supported only in line no. 0. Not supported on MP500. In case of MP124 this test is supported in all ports except ports 2 and 3. As of version 6.6 this is an obsolete parameter. AC INI-Param: N/A | |||||||||||||
| CacAnalogFxsLineTestLineVoltageReading | 1.3.6.1.4.1.5003.9.10.8.3.2.1.1.8 | Integer32 (-6000..6000) | RO | obsolete | |||||||||
column · Integer32 (-6000..6000) · read-only · obsolete The Line voltage reading in 10mV units. In case of MP124 the Line voltage reading in 1V units. This test is supported only in line no. 0. Not supported on MP500. In case of MP124 this test is supported in all ports except ports 2 and 3. As of version 6.6 this is an obsolete parameter. AC INI-Param: N/A | |||||||||||||
| CacAnalogFxsLineTestAnalogVoltageReading | 1.3.6.1.4.1.5003.9.10.8.3.2.1.1.9 | Unsigned32 (300..340) | RO | obsolete | |||||||||
column · Unsigned32 (300..340) · read-only · obsolete The current analog voltage reading in 10mV units. his test is supported only in line no. 0. Not supported on MP500. In case of MP124 this test is supported in all ports except ports 2 and 3. As of version 6.6 this is an obsolete parameter. AC INI-Param: N/A | |||||||||||||
| CacAnalogFxsLineTestRingVoltageReading | 1.3.6.1.4.1.5003.9.10.8.3.2.1.1.10 | Integer32 (-13000..13000) | RO | obsolete | |||||||||
column · Integer32 (-13000..13000) · read-only · obsolete The current ring voltage reading in 10mV units. This test is supported only in line no. 0. Not supported on MP500. In case of MP124 this test is supported in all ports except ports 2 and 3. As of version 6.6 this is an obsolete parameter. AC INI-Param: N/A | |||||||||||||
| CacAnalogFxsLineTestLongLineCurrentReading | 1.3.6.1.4.1.5003.9.10.8.3.2.1.1.11 | Unsigned32 (0..4000) | RO | obsolete | |||||||||
column · Unsigned32 (0..4000) · read-only · obsolete The current long line reading in 10ua units. This test is supported only in line no. 0. Not supported on MP500. In case of MP124 this test is supported in all ports except ports 2 and 3. As of version 6.6 this is an obsolete parameter. AC INI-Param: N/A | |||||||||||||
| NacAnalogCommonAction | 1.3.6.1.4.1.5003.9.10.8.3.3 | ||||||||||||
| TacAnalogCommonChannelTable | 1.3.6.1.4.1.5003.9.10.8.3.3.1 | NA | |||||||||||
table · not-accessible · current Table for common channels operations. | |||||||||||||
| RacAnalogCommonChannelEntry | 1.3.6.1.4.1.5003.9.10.8.3.3.1.1 | NA | |||||||||||
row · not-accessible · current | |||||||||||||
| CacAnalogCommonChannelIndex | 1.3.6.1.4.1.5003.9.10.8.3.3.1.1.1 | Unsigned32 (0..5000) | NA | ||||||||||
column · Unsigned32 (0..5000) · not-accessible · current Index for table use, the current channel. AC INI-Param: N/A | |||||||||||||
| CacAnalogCommonChannelAction | 1.3.6.1.4.1.5003.9.10.8.3.3.1.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current An action to make on the current channel, The Reset action is for Analog channels only. AC INI-Param: N/A
| |||||||||||||