ATS-MIB
Ablerex Electronic Co., Ltd.snmptranslate -m ATS-MIB -Tpsnmpwalk -v2c -c <community> -m ATS-MIB <host> 1.3.6.1.4.1.37662Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
| UPS-MIB | NonNegativeInteger, PositiveInteger |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Nats | 1.3.6.1.4.1.37662 | ||||||||||||
| Nproduct | 1.3.6.1.4.1.37662.1 | ||||||||||||
| NwebAppliance | 1.3.6.1.4.1.37662.1.2 | ||||||||||||
| NatsAgent | 1.3.6.1.4.1.37662.1.2.2 | ||||||||||||
| Nsingle | 1.3.6.1.4.1.37662.1.2.2.1 | ||||||||||||
| NatsObjectGroup | 1.3.6.1.4.1.37662.1.2.2.1.1 | ||||||||||||
| NatsIdentGroup | 1.3.6.1.4.1.37662.1.2.2.1.1.1 | ||||||||||||
| SatsIdentGroupModel | 1.3.6.1.4.1.37662.1.2.2.1.1.1.1 | DisplayString | RO | mandatory | |||||||||
scalar · DisplayString · read-only · mandatory The device model name. | |||||||||||||
| SatsIdentGroupSerialNumber | 1.3.6.1.4.1.37662.1.2.2.1.1.1.2 | DisplayString | RO | mandatory | |||||||||
scalar · DisplayString · read-only · mandatory The device serial number. | |||||||||||||
| SatsIdentGroupManufacturer | 1.3.6.1.4.1.37662.1.2.2.1.1.1.3 | DisplayString | RO | mandatory | |||||||||
scalar · DisplayString · read-only · mandatory The device manufacturer name. | |||||||||||||
| SatsIdentGroupFirmwareRevision | 1.3.6.1.4.1.37662.1.2.2.1.1.1.4 | DisplayString | RO | mandatory | ATS11747 | ||||||||
scalar · DisplayString · read-only · mandatory The device firmware revision. Example values from LibreNMS test devices
| |||||||||||||
| SatsIdentGroupAgentFirmwareRevision | 1.3.6.1.4.1.37662.1.2.2.1.1.1.5 | DisplayString | RO | mandatory | |||||||||
scalar · DisplayString · read-only · mandatory The agent firmware revision. | |||||||||||||
| NatsInputGroup | 1.3.6.1.4.1.37662.1.2.2.1.1.2 | ||||||||||||
| SatsInputGroupPreference | 1.3.6.1.4.1.37662.1.2.2.1.1.2.1 | DisplayString | RO | mandatory | |||||||||
scalar · DisplayString · read-only · mandatory This shows the Output Source Priority by Source A or Source B. | |||||||||||||
| SatsInputGroupSourceAstatus | 1.3.6.1.4.1.37662.1.2.2.1.1.2.2 | INTEGER | RO | mandatory | ok(2) | ||||||||
scalar · INTEGER · read-only · mandatory This field shows the status of the source A. Status included? 'OK','Fail'. 'OK' mean frequency and voltage of Source A are normal.
Example values from LibreNMS test devices
| |||||||||||||
| SatsInputGroupSourceAinputVoltage | 1.3.6.1.4.1.37662.1.2.2.1.1.2.3 | INTEGER | RO | mandatory | 235 | ||||||||
scalar · INTEGER · read-only · mandatory The source A input voltage of the ATS input in volts. Example values from LibreNMS test devices
| |||||||||||||
| SatsInputGroupSourceAinputFrequency | 1.3.6.1.4.1.37662.1.2.2.1.1.2.4 | INTEGER | RO | mandatory | 500 | ||||||||
scalar · INTEGER · read-only · mandatory The source A input frequency of the ATS input in 0.1 Hz. Example values from LibreNMS test devices
| |||||||||||||
| SatsInputGroupSourceBstatus | 1.3.6.1.4.1.37662.1.2.2.1.1.2.5 | INTEGER | RO | mandatory | ok(2) | ||||||||
scalar · INTEGER · read-only · mandatory This field shows the status of the source B. Status included? 'OK','Fail'. 'OK' mean frequency and voltage of Source B are normal.
Example values from LibreNMS test devices
| |||||||||||||
| SatsInputGroupSourceBinputVoltage | 1.3.6.1.4.1.37662.1.2.2.1.1.2.6 | INTEGER | RO | mandatory | 236 | ||||||||
scalar · INTEGER · read-only · mandatory The source B input voltage of the ATS input in volts. Example values from LibreNMS test devices
| |||||||||||||
| SatsInputGroupSourceBinputFrequency | 1.3.6.1.4.1.37662.1.2.2.1.1.2.7 | INTEGER | RO | mandatory | 500 | ||||||||
scalar · INTEGER · read-only · mandatory The source B input frequency of the ATS input in 0.1 Hz. Example values from LibreNMS test devices
| |||||||||||||
| SatsInputGroupSourceAvoltageUpperLimit | 1.3.6.1.4.1.37662.1.2.2.1.1.2.8 | INTEGER | RO | mandatory | 264 | ||||||||
scalar · INTEGER · read-only · mandatory The source A voltage upper limit of the ATS input in volts. Example values from LibreNMS test devices
| |||||||||||||
| SatsInputGroupSourceAvoltageLowerLimit | 1.3.6.1.4.1.37662.1.2.2.1.1.2.9 | INTEGER | RO | mandatory | 195 | ||||||||
scalar · INTEGER · read-only · mandatory The source A voltage lower limit of the ATS input in volts. Example values from LibreNMS test devices
| |||||||||||||
| SatsInputGroupSourceAfrequencyUpperLimit | 1.3.6.1.4.1.37662.1.2.2.1.1.2.10 | INTEGER | RO | mandatory | 550 | ||||||||
scalar · INTEGER · read-only · mandatory The source A frequency upper limit of the ATS input in 0.1 Hz. Example values from LibreNMS test devices
| |||||||||||||
| SatsInputGroupSourceAfrequencyLowerLimit | 1.3.6.1.4.1.37662.1.2.2.1.1.2.11 | INTEGER | RO | mandatory | 450 | ||||||||
scalar · INTEGER · read-only · mandatory The source A frequency lower limit of the ATS input in 0.1 Hz. Example values from LibreNMS test devices
| |||||||||||||
| SatsInputGroupSourceBvoltageUpperLimit | 1.3.6.1.4.1.37662.1.2.2.1.1.2.12 | INTEGER | RO | mandatory | 264 | ||||||||
scalar · INTEGER · read-only · mandatory The source B voltage upper limit of the ATS input in volts. Example values from LibreNMS test devices
| |||||||||||||
| SatsInputGroupSourceBvoltageLowerLimit | 1.3.6.1.4.1.37662.1.2.2.1.1.2.13 | INTEGER | RO | mandatory | 195 | ||||||||
scalar · INTEGER · read-only · mandatory The source B voltage lower limit of the ATS input in volts. Example values from LibreNMS test devices
| |||||||||||||
| SatsInputGroupSourceBfrequencyUpperLimit | 1.3.6.1.4.1.37662.1.2.2.1.1.2.14 | INTEGER | RO | mandatory | 550 | ||||||||
scalar · INTEGER · read-only · mandatory The source B frequency upper limit of the ATS input in 0.1 Hz. Example values from LibreNMS test devices
| |||||||||||||
| SatsInputGroupSourceBfrequencyLowerLimit | 1.3.6.1.4.1.37662.1.2.2.1.1.2.15 | INTEGER | RO | mandatory | 450 | ||||||||
scalar · INTEGER · read-only · mandatory The source B frequency lower limit of the ATS input in 0.1 Hz. Example values from LibreNMS test devices
| |||||||||||||
| NatsOutputGroup | 1.3.6.1.4.1.37662.1.2.2.1.1.3 | ||||||||||||
| SatsOutputGroupOutputSource | 1.3.6.1.4.1.37662.1.2.2.1.1.3.1 | DisplayString | RO | mandatory | |||||||||
scalar · DisplayString · read-only · mandatory Output source is supply by Source A or Source B. Status included? 'Source A','Source B'. | |||||||||||||
| SatsOutputGroupOutputVoltage | 1.3.6.1.4.1.37662.1.2.2.1.1.3.2 | NonNegativeInteger | RO | mandatory | |||||||||
scalar · NonNegativeInteger · read-only · mandatory The Output Voltage in volts. | |||||||||||||
| SatsOutputGroupOutputFequency | 1.3.6.1.4.1.37662.1.2.2.1.1.3.3 | NonNegativeInteger | RO | mandatory | |||||||||
scalar · NonNegativeInteger · read-only · mandatory The output fequency in 0.1 Hz. | |||||||||||||
| SatsOutputGroupOutputCurrent | 1.3.6.1.4.1.37662.1.2.2.1.1.3.4 | NonNegativeInteger | RO | mandatory | 3 | ||||||||
scalar · NonNegativeInteger · read-only · mandatory The output current in 0.1 A. Example values from LibreNMS test devices
| |||||||||||||
| SatsOutputGroupLoad | 1.3.6.1.4.1.37662.1.2.2.1.1.3.5 | NonNegativeInteger | RO | mandatory | 0 | ||||||||
scalar · NonNegativeInteger · read-only · mandatory The load in %. Example values from LibreNMS test devices
| |||||||||||||
| NatsHmiSwitchGroup | 1.3.6.1.4.1.37662.1.2.2.1.1.4 | ||||||||||||
| SatsHmiSwitchGroupBuzzer | 1.3.6.1.4.1.37662.1.2.2.1.1.4.1 | INTEGER | RO | mandatory | buzzerEnabled(2) | ||||||||
scalar · INTEGER · read-only · mandatory This field shows the status of the buzzer. Status included? 'Enable','Disable'.
Example values from LibreNMS test devices
| |||||||||||||
| SatsHmiSwitchGroupAtsAlarm | 1.3.6.1.4.1.37662.1.2.2.1.1.4.2 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory This shows the alarm occured.
| |||||||||||||
| SatsHmiSwitchGroupAutoReturn | 1.3.6.1.4.1.37662.1.2.2.1.1.4.3 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory Auto recover to that setting value when two input source normal.
| |||||||||||||
| SatsHmiSwitchGroupSourceTransferByLoad | 1.3.6.1.4.1.37662.1.2.2.1.1.4.4 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory On: If overload timeout occurred , ATS will tranfer to another source automaticlly. Off:If overload timeout occurred , ATS will turn off the output source.
| |||||||||||||
| SatsHmiSwitchGroupSourceTransferByPhase | 1.3.6.1.4.1.37662.1.2.2.1.1.4.5 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory On: when the transfer of output source occur, the transfer can active if differernce of phase less than setting value Off: Switch transfer immed... whatever difference of phase.
| |||||||||||||
| NatsMiscellaneousGroup | 1.3.6.1.4.1.37662.1.2.2.1.1.5 | ||||||||||||
| SatsMiscellaneousGroupAtsSystemTemperture | 1.3.6.1.4.1.37662.1.2.2.1.1.5.1 | INTEGER | RO | mandatory | 29 | ||||||||
scalar · INTEGER · read-only · mandatory The ATS system temperture in degree C. Example values from LibreNMS test devices
| |||||||||||||
| SatsMiscellaneousGroupSystemMaxCurrent | 1.3.6.1.4.1.37662.1.2.2.1.1.5.2 | INTEGER | RO | mandatory | 160 | ||||||||
scalar · INTEGER · read-only · mandatory The system max current int 0.1 Amp. Example values from LibreNMS test devices
| |||||||||||||
| NatsControlGroup | 1.3.6.1.4.1.37662.1.2.2.1.1.6 | ||||||||||||
| SatsControlGroupBuzzerAlarmControl | 1.3.6.1.4.1.37662.1.2.2.1.1.6.1 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The buzzer alarm control.
| |||||||||||||
| SatsControlGroupManualTransfer | 1.3.6.1.4.1.37662.1.2.2.1.1.6.2 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory User can click this bottom to decide output source supply is Source A or Source B. | |||||||||||||
| NagentConfig | 1.3.6.1.4.1.37662.1.2.2.1.1.7 | ||||||||||||
| SagentConfigIpaddress | 1.3.6.1.4.1.37662.1.2.2.1.1.7.1 | IpAddress | RW | mandatory | |||||||||
scalar · IpAddress · read-write · mandatory The ip address that NMS can identify the managed device | |||||||||||||
| SagentConfigGateway | 1.3.6.1.4.1.37662.1.2.2.1.1.7.2 | IpAddress | RW | mandatory | |||||||||
scalar · IpAddress · read-write · mandatory The default gateway that allow device managed through routers | |||||||||||||
| SagentConfigSubnetMask | 1.3.6.1.4.1.37662.1.2.2.1.1.7.3 | IpAddress | RW | mandatory | |||||||||
scalar · IpAddress · read-write · mandatory Internet address subnet mask | |||||||||||||
| SagentConfigDate | 1.3.6.1.4.1.37662.1.2.2.1.1.7.4 | DisplayString (SIZE (10)) | RW | mandatory | |||||||||
scalar · DisplayString (SIZE (10)) · read-write · mandatory The date in agent, format is (dd/mm/yyyy) | |||||||||||||
| SagentConfigTime | 1.3.6.1.4.1.37662.1.2.2.1.1.7.5 | DisplayString (SIZE (8)) | RW | mandatory | |||||||||
scalar · DisplayString (SIZE (8)) · read-write · mandatory The time in agent, format is (hh:mm:ss) | |||||||||||||
| SagentConfigHistoryLogFrequency | 1.3.6.1.4.1.37662.1.2.2.1.1.7.6 | INTEGER (1..28800) | RW | mandatory | |||||||||
scalar · INTEGER (1..28800) · read-write · mandatory The frequency of the updation of the history log. The value is in seconds | |||||||||||||
| SagentConfigExtHistoryLogFrequency | 1.3.6.1.4.1.37662.1.2.2.1.1.7.7 | INTEGER (1..10080) | RW | mandatory | |||||||||
scalar · INTEGER (1..10080) · read-write · mandatory The ups parameters are sampled at the rate governed by the mconfigHistroyLogFrequency. These sampled values are further conslidated over period of time which is determined by this object. | |||||||||||||
| SagentConfigPollRate | 1.3.6.1.4.1.37662.1.2.2.1.1.7.8 | INTEGER (1..999) | RW | mandatory | |||||||||
scalar · INTEGER (1..999) · read-write · mandatory The frequency that proxy agent polls the connected UPS in JBUS protocol. (unit : second) | |||||||||||||
| SagentConfigBaudRate | 1.3.6.1.4.1.37662.1.2.2.1.1.7.9 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory The serial port communication speed. only 9600 allowed | |||||||||||||
| SagentConfigDhcpStatue | 1.3.6.1.4.1.37662.1.2.2.1.1.7.10 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Enable or disable DHCP/BootP capability
| |||||||||||||
| SagentConfigTelnetStatue | 1.3.6.1.4.1.37662.1.2.2.1.1.7.11 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Enable or disable telnet access
| |||||||||||||
| SagentConfigTftpStatue | 1.3.6.1.4.1.37662.1.2.2.1.1.7.12 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Enable or disable network upgrade capability
| |||||||||||||
| SagentConfigResetToDefault | 1.3.6.1.4.1.37662.1.2.2.1.1.7.13 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Reset all parameters of ATS to default value
| |||||||||||||
| SagentConfigRestart | 1.3.6.1.4.1.37662.1.2.2.1.1.7.14 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Restart ATS
| |||||||||||||
| SagentConfigClearAgentLog | 1.3.6.1.4.1.37662.1.2.2.1.1.7.15 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Clear agent log data
| |||||||||||||
| SagentConfigClearEventLog | 1.3.6.1.4.1.37662.1.2.2.1.1.7.16 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Clear event log data
| |||||||||||||
| SagentConfigClearExtHistoryLog | 1.3.6.1.4.1.37662.1.2.2.1.1.7.17 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Clear extented history log data
| |||||||||||||
| SagentConfigClearHistoryLog | 1.3.6.1.4.1.37662.1.2.2.1.1.7.18 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Clear history log data
| |||||||||||||
| SagentConfigTrapRetryCount | 1.3.6.1.4.1.37662.1.2.2.1.1.7.19 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The count of repeat traps to send to NMS before trap acknowledge received. | |||||||||||||
| SagentConfigTrapRetryTime | 1.3.6.1.4.1.37662.1.2.2.1.1.7.20 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The time between retry traps sned to NMS. | |||||||||||||
| SagentConfigTrapAckSignature | 1.3.6.1.4.1.37662.1.2.2.1.1.7.21 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The signature of trap acknowledge. | |||||||||||||
| SagentConfigMibVersion | 1.3.6.1.4.1.37662.1.2.2.1.1.7.22 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory The version of MIB spec. | |||||||||||||
| TagentConfigTrapsReceiversTable | 1.3.6.1.4.1.37662.1.2.2.1.1.7.23 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A list of managers to send traps to. The number of entries is given by the value of agentConfigNumTrapReceivers | |||||||||||||
| RagentConfigTrapsReceiversEntry | 1.3.6.1.4.1.37662.1.2.2.1.1.7.23.1 | NA | mandatory | ||||||||||
| CtrapsIndex | 1.3.6.1.4.1.37662.1.2.2.1.1.7.23.1.1 | INTEGER (0..65535) | RO | mandatory | |||||||||
column · INTEGER (0..65535) · read-only · mandatory The index to a trap receiver entry. | |||||||||||||
| CtrapsReceiverAddr | 1.3.6.1.4.1.37662.1.2.2.1.1.7.23.1.2 | DisplayString | RW | mandatory | |||||||||
column · DisplayString · read-write · mandatory The IP address of the manager to send a trap to. | |||||||||||||
| CreceiverCommunityString | 1.3.6.1.4.1.37662.1.2.2.1.1.7.23.1.3 | DisplayString (SIZE (0..19)) | RW | mandatory | |||||||||
column · DisplayString (SIZE (0..19)) · read-write · mandatory The community name to use in the trap when sent to the manager. | |||||||||||||
| CreceiverNmsType | 1.3.6.1.4.1.37662.1.2.2.1.1.7.23.1.4 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The trap group that NMS desired.
| |||||||||||||
| CreceiverSeverityLevel | 1.3.6.1.4.1.37662.1.2.2.1.1.7.23.1.5 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory The severity level of traps to be received by this manager.
| |||||||||||||
| CreceiverDescription | 1.3.6.1.4.1.37662.1.2.2.1.1.7.23.1.6 | DisplayString (SIZE (0..31)) | RW | mandatory | |||||||||
column · DisplayString (SIZE (0..31)) · read-write · mandatory Description of trap receivers | |||||||||||||
| TagentConfigAccessControlTable | 1.3.6.1.4.1.37662.1.2.2.1.1.7.24 | NA | mandatory | ||||||||||
table · not-accessible · mandatory A list of managers which can access ATS with private community string. | |||||||||||||
| RagentConfigAccessControlEntry | 1.3.6.1.4.1.37662.1.2.2.1.1.7.24.1 | NA | mandatory | ||||||||||
| CaccessIndex | 1.3.6.1.4.1.37662.1.2.2.1.1.7.24.1.1 | INTEGER | RO | mandatory | |||||||||
column · INTEGER · read-only · mandatory The index to a access control entry. | |||||||||||||
| CaccessControlAddr | 1.3.6.1.4.1.37662.1.2.2.1.1.7.24.1.2 | IpAddress | RW | mandatory | |||||||||
column · IpAddress · read-write · mandatory The IP address of the manager to access ATS | |||||||||||||
| CaccessCommunityString | 1.3.6.1.4.1.37662.1.2.2.1.1.7.24.1.3 | DisplayString (SIZE (0..19)) | RW | mandatory | |||||||||
column · DisplayString (SIZE (0..19)) · read-write · mandatory The community name to use in the manager when access ATS | |||||||||||||
| CaccessControlMode | 1.3.6.1.4.1.37662.1.2.2.1.1.7.24.1.4 | INTEGER | RW | mandatory | |||||||||
column · INTEGER · read-write · mandatory Access type, only read/Write access type can change parameter of ATS
| |||||||||||||
| SagentConfigDefaultLanguage | 1.3.6.1.4.1.37662.1.2.2.1.1.7.25 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The default languauge for browser, when set to auto(1) ATS will send page in the language depends on the request language of browser.
| |||||||||||||
| SagentConfigIPv6AddrStatus | 1.3.6.1.4.1.37662.1.2.2.1.1.7.26 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory The status of IPv6 global address. When the auto-configuration of IPv6 address is disabled, it shows manual configuration(3). Otherwise, it shows valid(2) for auto-configured successfully, or shows invalid(1) for the failure in auto-configured.
| |||||||||||||
| SagentConfigIPv6AddrAutoConfig | 1.3.6.1.4.1.37662.1.2.2.1.1.7.27 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The state of IPv6 address auto-configuration. If set to enable(1), ATS will try to get a valid global/site-local address from IPv6 router or DHCPv6 server on the same link.
| |||||||||||||
| SagentConfigIPv6LinkLocalAddr | 1.3.6.1.4.1.37662.1.2.2.1.1.7.28 | DisplayString (SIZE (0..255)) | RO | mandatory | |||||||||
scalar · DisplayString (SIZE (0..255)) · read-only · mandatory The IPv6 link-local address of ATS. It is auto-configured based on MAC address of ATS. | |||||||||||||
| SagentConfigIPv6GlobalAddr | 1.3.6.1.4.1.37662.1.2.2.1.1.7.29 | DisplayString (SIZE (0..255)) | RW | mandatory | |||||||||
scalar · DisplayString (SIZE (0..255)) · read-write · mandatory The IPv6 global/site-local address of ATS. If change it manually, the agentConfigIPv6AddrStatus and agentConfigIPv6AddrAutoConfig will be changed to manual configuration and disabled respectively. | |||||||||||||
| SagentConfigIPv6PrefixlLength | 1.3.6.1.4.1.37662.1.2.2.1.1.7.30 | INTEGER (1..128) | RW | mandatory | |||||||||
scalar · INTEGER (1..128) · read-write · mandatory The prefix length of IPv6 global/site-local address.If change it manually, the agentConfigIPv6AddrStatus and agentConfigIPv6AddrAutoConfig will be changed to manual configuration and disabled respectively. | |||||||||||||
| SagentConfigIPv6DefaultRouter | 1.3.6.1.4.1.37662.1.2.2.1.1.7.31 | DisplayString (SIZE (0..255)) | RW | mandatory | |||||||||
scalar · DisplayString (SIZE (0..255)) · read-write · mandatory The address of IPv6 default router. If change it manually, the agentConfigIPv6AddrStatus and agentConfigIPv6AddrAutoConfig will be changed to manual configuration and disabled respectively. | |||||||||||||
| NemdStatus | 1.3.6.1.4.1.37662.1.2.2.1.1.8 | ||||||||||||
| SemdSatatusEmdType | 1.3.6.1.4.1.37662.1.2.2.1.1.8.1 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory The type of EMD plugged into the port.
| |||||||||||||
| SemdSatatusTemperature | 1.3.6.1.4.1.37662.1.2.2.1.1.8.2 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory The measurement of EMD temperature, in 0.1 degree | |||||||||||||
| SemdSatatusHumidity | 1.3.6.1.4.1.37662.1.2.2.1.1.8.3 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory The measurement of EMD humidity, in 0.1 degree | |||||||||||||
| SemdSatatusAlarm1 | 1.3.6.1.4.1.37662.1.2.2.1.1.8.4 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory The EMD alarm-1 status
| |||||||||||||
| SemdSatatusAlarm2 | 1.3.6.1.4.1.37662.1.2.2.1.1.8.5 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory The EMD alarm-2 status
| |||||||||||||
| NemdConfig | 1.3.6.1.4.1.37662.1.2.2.1.1.9 | ||||||||||||
| SusahEmdConfigEmdConfig | 1.3.6.1.4.1.37662.1.2.2.1.1.9.1 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory Enable or disable to detect presence of EMD
| |||||||||||||
| SemdConfigEmdName | 1.3.6.1.4.1.37662.1.2.2.1.1.9.2 | DisplayString (SIZE (0..15)) | RW | mandatory | |||||||||
scalar · DisplayString (SIZE (0..15)) · read-write · mandatory Description of EMD | |||||||||||||
| NemdConfigTemperature | 1.3.6.1.4.1.37662.1.2.2.1.1.9.3 | ||||||||||||
| SemdConfigTempName | 1.3.6.1.4.1.37662.1.2.2.1.1.9.3.1 | DisplayString (SIZE (0..15)) | RW | mandatory | |||||||||
scalar · DisplayString (SIZE (0..15)) · read-write · mandatory Description of EMD temperature sensor | |||||||||||||
| SemdConfigTempHighSetPoint | 1.3.6.1.4.1.37662.1.2.2.1.1.9.3.2 | INTEGER | RW | mandatory | 40 | ||||||||
scalar · INTEGER · read-write · mandatory The set point for high temperature warning, in degrees Example values from LibreNMS test devices
| |||||||||||||
| SemdConfigTempHighStatus | 1.3.6.1.4.1.37662.1.2.2.1.1.9.3.3 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory To enable/disable high set point check with emd temperature.
| |||||||||||||
| SemdConfigTempLowSetPoint | 1.3.6.1.4.1.37662.1.2.2.1.1.9.3.4 | INTEGER | RW | mandatory | 5 | ||||||||
scalar · INTEGER · read-write · mandatory The set point for low temperature warning, in degrees Example values from LibreNMS test devices
| |||||||||||||
| SemdConfigTempLowStatus | 1.3.6.1.4.1.37662.1.2.2.1.1.9.3.5 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory To enable/disable low set point check with emd temperature.
| |||||||||||||
| SemdConfigTempOffset | 1.3.6.1.4.1.37662.1.2.2.1.1.9.3.6 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The offset to calibrate temperature of EMD, in degrees | |||||||||||||
| NemdConfigHumidity | 1.3.6.1.4.1.37662.1.2.2.1.1.9.4 | ||||||||||||
| SemdConfigHumidityName | 1.3.6.1.4.1.37662.1.2.2.1.1.9.4.1 | DisplayString (SIZE (0..15)) | RW | mandatory | |||||||||
scalar · DisplayString (SIZE (0..15)) · read-write · mandatory Description of EMD humidity sensor | |||||||||||||
| SemdConfigHumidityHighSetPoint | 1.3.6.1.4.1.37662.1.2.2.1.1.9.4.2 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The set point for high humidity warning, in % | |||||||||||||
| SemdConfigHumidityHighStatus | 1.3.6.1.4.1.37662.1.2.2.1.1.9.4.3 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory To enable/disable high set point check with emd humidity.
| |||||||||||||
| SemdConfigHumidityLowSetPoint | 1.3.6.1.4.1.37662.1.2.2.1.1.9.4.4 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The set point for low humidity warning, in % | |||||||||||||
| SemdConfigHumidityLowStatus | 1.3.6.1.4.1.37662.1.2.2.1.1.9.4.5 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory To enable/disable low set point check with emd humidity.
| |||||||||||||
| SemdConfigHumidityOffset | 1.3.6.1.4.1.37662.1.2.2.1.1.9.4.6 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The offset to calibrate humidity of EMD, in % | |||||||||||||
| NemdConfigAlarm1 | 1.3.6.1.4.1.37662.1.2.2.1.1.9.5 | ||||||||||||
| SemdConfigAlarm1Name | 1.3.6.1.4.1.37662.1.2.2.1.1.9.5.1 | DisplayString (SIZE (0..15)) | RW | mandatory | |||||||||
scalar · DisplayString (SIZE (0..15)) · read-write · mandatory Description of EMD alarm-1 | |||||||||||||
| SemdConfigAlarm1Type | 1.3.6.1.4.1.37662.1.2.2.1.1.9.5.2 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The alarm-1 operation type
| |||||||||||||
| NemdConfigAlarm2 | 1.3.6.1.4.1.37662.1.2.2.1.1.9.6 | ||||||||||||
| SemdConfigAlarm2Name | 1.3.6.1.4.1.37662.1.2.2.1.1.9.6.1 | DisplayString (SIZE (0..15)) | RW | mandatory | |||||||||
scalar · DisplayString (SIZE (0..15)) · read-write · mandatory Description of EMD alarm-2 | |||||||||||||
| SemdConfigAlarm2Type | 1.3.6.1.4.1.37662.1.2.2.1.1.9.6.2 | INTEGER | RW | mandatory | |||||||||
scalar · INTEGER · read-write · mandatory The alarm-1 operation type
| |||||||||||||
| NatsTrapGroup | 1.3.6.1.4.1.37662.1.2.2.1.2 | ||||||||||||
| !atsAtsAlarm | 1.3.6.1.4.1.37662.1.2.2.1.2.0.1 | ||||||||||||
notification WARNING: ATS Alarm. | |||||||||||||
| !atsSourceAvoltageAbnormal | 1.3.6.1.4.1.37662.1.2.2.1.2.0.2 | ||||||||||||
notification WARNING: Source A voltage abnormal. | |||||||||||||
| !atsSourceBvoltageAbnormal | 1.3.6.1.4.1.37662.1.2.2.1.2.0.3 | ||||||||||||
notification WARNING: Source B voltage abnormal. | |||||||||||||
| !atsSourceAfrequencyAbnormal | 1.3.6.1.4.1.37662.1.2.2.1.2.0.4 | ||||||||||||
notification WARNING: Source A frequency abnormal. | |||||||||||||
| !atsSourceBfrequencyAbnormal | 1.3.6.1.4.1.37662.1.2.2.1.2.0.5 | ||||||||||||
notification WARNING: Source B frequency abnormal. | |||||||||||||
| !atsOutputOverLoad | 1.3.6.1.4.1.37662.1.2.2.1.2.0.6 | ||||||||||||
notification SEVERE: Output over load. | |||||||||||||
| !atsWorkPowerAabnormal | 1.3.6.1.4.1.37662.1.2.2.1.2.0.7 | ||||||||||||
notification SEVERE: Unit fault (Working power A abnormal). | |||||||||||||
| !atsWorkPowerBabnormal | 1.3.6.1.4.1.37662.1.2.2.1.2.0.8 | ||||||||||||
notification SEVERE: Unit fault (Working power B abnormal). | |||||||||||||
| !atsOverTemperature | 1.3.6.1.4.1.37662.1.2.2.1.2.0.9 | ||||||||||||
notification WARNING: Cabinet over temperature. | |||||||||||||
| !atsDcOffsetAbnormal | 1.3.6.1.4.1.37662.1.2.2.1.2.0.10 | ||||||||||||
notification SEVERE: Unit fault (Sensor circuit abnormal). | |||||||||||||
| !atsEepromAbnormal | 1.3.6.1.4.1.37662.1.2.2.1.2.0.11 | ||||||||||||
notification SEVERE: Unit fault (EEPROM data abnormal) | |||||||||||||
| !atsLcdNotConnect | 1.3.6.1.4.1.37662.1.2.2.1.2.0.12 | ||||||||||||
notification SEVERE: LCD panel connection abnormal. | |||||||||||||
| !atsOutputExceedsOverloadTime | 1.3.6.1.4.1.37662.1.2.2.1.2.0.13 | ||||||||||||
notification SEVERE: Overload time out, Output off, Reset needed. | |||||||||||||
| !atsInputPhaseDifference | 1.3.6.1.4.1.37662.1.2.2.1.2.0.14 | ||||||||||||
notification SEVERE: Phase difference between resources exceed user defined value, Output off, Reset needed. | |||||||||||||
| !atsUserSetOverLoad | 1.3.6.1.4.1.37662.1.2.2.1.2.0.15 | ||||||||||||
notification WARNING: User defined load pre-alarm. | |||||||||||||
| !atsAtsAlarmToNormal | 1.3.6.1.4.1.37662.1.2.2.1.2.0.16 | ||||||||||||
notification INFORMATION: ATS Alarm Normal. | |||||||||||||
| !atsSourceAvoltageAbnormalToNormal | 1.3.6.1.4.1.37662.1.2.2.1.2.0.17 | ||||||||||||
notification INFORMATION: Source A Voltage Normal. | |||||||||||||
| !atsSourceBvoltageAbnormalToNormal | 1.3.6.1.4.1.37662.1.2.2.1.2.0.18 | ||||||||||||
notification INFORMATION: Source B Voltage Normal. | |||||||||||||
| !atsSourceAfrequencyAbnormalToNormal | 1.3.6.1.4.1.37662.1.2.2.1.2.0.19 | ||||||||||||
notification INFORMATION: Source A Frequency Normal. | |||||||||||||
| !atsSourceBfrequencyAbnormalToNormal | 1.3.6.1.4.1.37662.1.2.2.1.2.0.20 | ||||||||||||
notification INFORMATION: Source B Frequency Normal. | |||||||||||||
| !atsOutputOverLoadToNormal | 1.3.6.1.4.1.37662.1.2.2.1.2.0.21 | ||||||||||||
notification INFORMATION: Output Load Normal. | |||||||||||||
| !atsWorkPowerAabnormalToNormal | 1.3.6.1.4.1.37662.1.2.2.1.2.0.22 | ||||||||||||
notification INFORMATION: Unit Normal (Working power A normal). | |||||||||||||
| !atsWorkPowerBabnormalToNormal | 1.3.6.1.4.1.37662.1.2.2.1.2.0.23 | ||||||||||||
notification INFORMATION: Unit Normal (Working power B normal). | |||||||||||||
| !atsOverTemperatureToNormal | 1.3.6.1.4.1.37662.1.2.2.1.2.0.24 | ||||||||||||
notification INFORMATION: Cabinet temperature Normal. | |||||||||||||
| !atsDcOffsetAbnormalToNormal | 1.3.6.1.4.1.37662.1.2.2.1.2.0.25 | ||||||||||||
notification INFORMATION: Unit Normal (Sensor circuit normal). | |||||||||||||
| !atsEepromAbnormalToNormal | 1.3.6.1.4.1.37662.1.2.2.1.2.0.26 | ||||||||||||
notification INFORMATION: Unit normal (EEPROM data normal) | |||||||||||||
| !atsLcdNotConnectToNormal | 1.3.6.1.4.1.37662.1.2.2.1.2.0.27 | ||||||||||||
notification INFORMATION: LCD panel connection normal. | |||||||||||||
| !atsOutputExceedsOverloadTimeToNormal | 1.3.6.1.4.1.37662.1.2.2.1.2.0.28 | ||||||||||||
notification INFORMATION: Output Load Normal. | |||||||||||||
| !atsInputPhaseDifferenceToNormal | 1.3.6.1.4.1.37662.1.2.2.1.2.0.29 | ||||||||||||
notification INFORMATION: Input sources return to normal phase. | |||||||||||||
| !atsUserSetOverLoadToNormal | 1.3.6.1.4.1.37662.1.2.2.1.2.0.30 | ||||||||||||
notification INFORMATION: User defined load return to Normal. | |||||||||||||
| !atsCommunicationLost | 1.3.6.1.4.1.37662.1.2.2.1.2.0.31 | ||||||||||||
notification SEVERE: Communication to the ATS has been lost. Steps to reestablish communication are in progress. | |||||||||||||
| !atsCommunicationEstablished | 1.3.6.1.4.1.37662.1.2.2.1.2.0.32 | ||||||||||||
notification INFORMATION: Communication with the ATS has been established. | |||||||||||||
| !emdTemperatureNotHigh | 1.3.6.1.4.1.37662.1.2.2.1.2.0.33 | ||||||||||||
notification INFORMATION: The temperature of EMD back to normal from high warning. | |||||||||||||
| !emdTemperatureTooHigh | 1.3.6.1.4.1.37662.1.2.2.1.2.0.34 | ||||||||||||
notification WARNING: The temperature of EMD higher than set point. | |||||||||||||
| !emdTemperatureNotLow | 1.3.6.1.4.1.37662.1.2.2.1.2.0.35 | ||||||||||||
notification INFORMATION: The temperature of EMD back to normal from low warning. | |||||||||||||
| !emdTemperatureTooLow | 1.3.6.1.4.1.37662.1.2.2.1.2.0.36 | ||||||||||||
notification WARNING: The temperature of EMD lower than set point. | |||||||||||||
| !emdHumidityNotHigh | 1.3.6.1.4.1.37662.1.2.2.1.2.0.37 | ||||||||||||
notification INFORMATION: The humidity of EMD back to normal from high warning. | |||||||||||||
| !emdHumidityTooHigh | 1.3.6.1.4.1.37662.1.2.2.1.2.0.38 | ||||||||||||
notification WARNING: The humidity of EMD higher than set point. | |||||||||||||
| !emdHumidityNotLow | 1.3.6.1.4.1.37662.1.2.2.1.2.0.39 | ||||||||||||
notification INFORMATION: The humidity of EMD back to normal from low warning. | |||||||||||||
| !emdHumidityTooLow | 1.3.6.1.4.1.37662.1.2.2.1.2.0.40 | ||||||||||||
notification WARNING: The humidity of EMD lower than set point. | |||||||||||||
| !emdAlarm1Normal | 1.3.6.1.4.1.37662.1.2.2.1.2.0.41 | ||||||||||||
notification INFORMATION: The status of emd alarm-1 back to normal from active. | |||||||||||||
| !emdAlarm1Active | 1.3.6.1.4.1.37662.1.2.2.1.2.0.42 | ||||||||||||
notification WARNING: The status of emd alarm-1 activated. | |||||||||||||
| !emdAlarm2Normal | 1.3.6.1.4.1.37662.1.2.2.1.2.0.43 | ||||||||||||
notification INFORMATION: The status of emd alarm-2 back to normal from active. | |||||||||||||
| !emdAlarm2Active | 1.3.6.1.4.1.37662.1.2.2.1.2.0.44 | ||||||||||||
notification WARNING: The status of emd alarm-2 activated. | |||||||||||||
Traps / Notifications
- atsAtsAlarm
1.3.6.1.4.1.37662.1.2.2.1.2.0.1 - atsAtsAlarmToNormal
1.3.6.1.4.1.37662.1.2.2.1.2.0.16 - atsCommunicationEstablished
1.3.6.1.4.1.37662.1.2.2.1.2.0.32 - atsCommunicationLost
1.3.6.1.4.1.37662.1.2.2.1.2.0.31 - atsDcOffsetAbnormal
1.3.6.1.4.1.37662.1.2.2.1.2.0.10 - atsDcOffsetAbnormalToNormal
1.3.6.1.4.1.37662.1.2.2.1.2.0.25 - atsEepromAbnormal
1.3.6.1.4.1.37662.1.2.2.1.2.0.11 - atsEepromAbnormalToNormal
1.3.6.1.4.1.37662.1.2.2.1.2.0.26 - atsInputPhaseDifference
1.3.6.1.4.1.37662.1.2.2.1.2.0.14 - atsInputPhaseDifferenceToNormal
1.3.6.1.4.1.37662.1.2.2.1.2.0.29 - atsLcdNotConnect
1.3.6.1.4.1.37662.1.2.2.1.2.0.12 - atsLcdNotConnectToNormal
1.3.6.1.4.1.37662.1.2.2.1.2.0.27 - atsOutputExceedsOverloadTime
1.3.6.1.4.1.37662.1.2.2.1.2.0.13 - atsOutputExceedsOverloadTimeToNormal
1.3.6.1.4.1.37662.1.2.2.1.2.0.28 - atsOutputOverLoad
1.3.6.1.4.1.37662.1.2.2.1.2.0.6 - atsOutputOverLoadToNormal
1.3.6.1.4.1.37662.1.2.2.1.2.0.21 - atsOverTemperature
1.3.6.1.4.1.37662.1.2.2.1.2.0.9 - atsOverTemperatureToNormal
1.3.6.1.4.1.37662.1.2.2.1.2.0.24 - atsSourceAfrequencyAbnormal
1.3.6.1.4.1.37662.1.2.2.1.2.0.4 - atsSourceAfrequencyAbnormalToNormal
1.3.6.1.4.1.37662.1.2.2.1.2.0.19 - atsSourceAvoltageAbnormal
1.3.6.1.4.1.37662.1.2.2.1.2.0.2 - atsSourceAvoltageAbnormalToNormal
1.3.6.1.4.1.37662.1.2.2.1.2.0.17 - atsSourceBfrequencyAbnormal
1.3.6.1.4.1.37662.1.2.2.1.2.0.5 - atsSourceBfrequencyAbnormalToNormal
1.3.6.1.4.1.37662.1.2.2.1.2.0.20 - atsSourceBvoltageAbnormal
1.3.6.1.4.1.37662.1.2.2.1.2.0.3 - atsSourceBvoltageAbnormalToNormal
1.3.6.1.4.1.37662.1.2.2.1.2.0.18 - atsUserSetOverLoad
1.3.6.1.4.1.37662.1.2.2.1.2.0.15 - atsUserSetOverLoadToNormal
1.3.6.1.4.1.37662.1.2.2.1.2.0.30 - atsWorkPowerAabnormal
1.3.6.1.4.1.37662.1.2.2.1.2.0.7 - atsWorkPowerAabnormalToNormal
1.3.6.1.4.1.37662.1.2.2.1.2.0.22 - atsWorkPowerBabnormal
1.3.6.1.4.1.37662.1.2.2.1.2.0.8 - atsWorkPowerBabnormalToNormal
1.3.6.1.4.1.37662.1.2.2.1.2.0.23 - emdAlarm1Active
1.3.6.1.4.1.37662.1.2.2.1.2.0.42 - emdAlarm1Normal
1.3.6.1.4.1.37662.1.2.2.1.2.0.41 - emdAlarm2Active
1.3.6.1.4.1.37662.1.2.2.1.2.0.44 - emdAlarm2Normal
1.3.6.1.4.1.37662.1.2.2.1.2.0.43 - emdHumidityNotHigh
1.3.6.1.4.1.37662.1.2.2.1.2.0.37 - emdHumidityNotLow
1.3.6.1.4.1.37662.1.2.2.1.2.0.39 - emdHumidityTooHigh
1.3.6.1.4.1.37662.1.2.2.1.2.0.38 - emdHumidityTooLow
1.3.6.1.4.1.37662.1.2.2.1.2.0.40 - emdTemperatureNotHigh
1.3.6.1.4.1.37662.1.2.2.1.2.0.33 - emdTemperatureNotLow
1.3.6.1.4.1.37662.1.2.2.1.2.0.35 - emdTemperatureTooHigh
1.3.6.1.4.1.37662.1.2.2.1.2.0.34 - emdTemperatureTooLow
1.3.6.1.4.1.37662.1.2.2.1.2.0.36