ATEN-PE-CFG
ATEN INTERNATIONAL CO., LTD.ATEN PE MIB
snmptranslate -m ATEN-PE-CFG -Tpsnmpwalk -v2c -c <community> -m ATEN-PE-CFG <host> 1.3.6.1.4.1.21317Imports
| RFC1155-SMI | Gauge32 |
|---|---|
| SNMP-USER-BASED-SM-MIB | KeyChange |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Iaten | 1.3.6.1.4.1.21317 | ||||||||||||
identity ATEN PE MIB | |||||||||||||
| NatenProducts | 1.3.6.1.4.1.21317.1 | ||||||||||||
| Noverip | 1.3.6.1.4.1.21317.1.3 | ||||||||||||
| Npoweroverip | 1.3.6.1.4.1.21317.1.3.2 | ||||||||||||
| Npe | 1.3.6.1.4.1.21317.1.3.2.2 | ||||||||||||
| NuserManagement | 1.3.6.1.4.1.21317.1.3.2.2.1 | ||||||||||||
| TusrListTable | 1.3.6.1.4.1.21317.1.3.2.2.1.1 | NA | |||||||||||
table · not-accessible · current A list of user. The number of user is given by the value of usrcfgNumber. | |||||||||||||
| RusrListEntry | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1 | NA | |||||||||||
| CusrIndex | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.1 | INTEGER (1..9) | RO | ||||||||||
column · INTEGER (1..9) · read-only · current The value of usrIndex for the user. We have 1 administrator and 8 users. The index 9 will be the administrator. | |||||||||||||
| CusrType | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The user's type.
| |||||||||||||
| CusrName | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.3 | DisplayString (SIZE (1..16)) | RW | ||||||||||
column · DisplayString (SIZE (1..16)) · read-write · current A textual string containing name of the user. string length: 1~16 | |||||||||||||
| CusrPassword | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.4 | DisplayString (SIZE (1..16)) | RW | ||||||||||
column · DisplayString (SIZE (1..16)) · read-write · current A textual string containing password of the user. string length: 1~16 | |||||||||||||
| CusrPort1Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.5 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 1 authority. Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort2Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 2 authority. Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort3Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.7 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 3 authority. Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort4Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 4 authority. Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort5Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 5 authority. Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort6Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.10 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Dispaly or set this user's outlet 6 authority. Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort7Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.11 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 7 authority. Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort8Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.12 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 8 authority. Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort9Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.13 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 9 authority. Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort10Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.14 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 10 authority. Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort11Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.15 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 11 authority. Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort12Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.16 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 12 authority. Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort13Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.17 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 13 authority. Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort14Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.18 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 14 authority. Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort15Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.19 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 15 authority. Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort16Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.20 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 16 authority. Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort17Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.21 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 17 authority. Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort18Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.22 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 18 authority. Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort19Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.23 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 19 authority. Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort20Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.24 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 20 authority. Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort21Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.25 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 21 authority. Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort22Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.26 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 22 authority. Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort23Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.27 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 23 authority. Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort24Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.28 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 24 authority. Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort25Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.29 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 25 authority. Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort26Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.30 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 26 authority. Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort27Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.31 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 27 authority. Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort28Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.32 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 28 authority. Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort29Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.33 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 29 authority. Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort30Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.34 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 30 authority. Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort31Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.35 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 31 authority Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort32Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.36 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 32 authority Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort33Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.37 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 33 authority Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort34Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.38 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 34 authority Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort35Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.39 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 35 authority Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort36Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.40 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 36 authority Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort37Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.41 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 37 authority Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort38Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.42 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 38 authority Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort39Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.43 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 39 authority Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort40Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.44 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 40 authority Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort41Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.45 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 41 authority Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrPort42Auth | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.46 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user's outlet 42 authority Port in the pe of series represents outlet. Port in the Energy monitor of series represents a bank or a pdu.
| |||||||||||||
| CusrEnable | 1.3.6.1.4.1.21317.1.3.2.2.1.1.1.47 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set this user is enable or not
| |||||||||||||
| Ncontrol | 1.3.6.1.4.1.21317.1.3.2.2.2 | ||||||||||||
| Ndevice | 1.3.6.1.4.1.21317.1.3.2.2.2.1 | ||||||||||||
| SmodelName | 1.3.6.1.4.1.21317.1.3.2.2.2.1.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Indicate PE device model name. | |||||||||||||
| SdeviceName | 1.3.6.1.4.1.21317.1.3.2.2.2.1.2 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current The name of PE device. string length: 1~39 NOTE: Input string as /empty to set this object to NULL. | |||||||||||||
| TdeviceValueTable | 1.3.6.1.4.1.21317.1.3.2.2.2.1.3 | NA | |||||||||||
table · not-accessible · current Device value table. This table displays device's current, voltage, power and power dissipation. | |||||||||||||
| RdeviceValueEntry | 1.3.6.1.4.1.21317.1.3.2.2.2.1.3.1 | NA | |||||||||||
| CdeviceValueIndex | 1.3.6.1.4.1.21317.1.3.2.2.2.1.3.1.1 | INTEGER (1) | RO | ||||||||||
column · INTEGER (1) · read-only · current Index of deviceValue. | |||||||||||||
| CinputMaxVoltage | 1.3.6.1.4.1.21317.1.3.2.2.2.1.3.1.6 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Device input Voltage value. unit:(V) If the device does not support this OID, we show value 0. | |||||||||||||
| CinputMaxCurrent | 1.3.6.1.4.1.21317.1.3.2.2.2.1.3.1.7 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Device input Current value. unit:(A) If the device does not support this OID, we show value 0. | |||||||||||||
| CpowerCapacity | 1.3.6.1.4.1.21317.1.3.2.2.2.1.3.1.8 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Device power Capacity value.unit:(VA) If the device does not support this OID, we show value 0. | |||||||||||||
| CdevicePowerFactor | 1.3.6.1.4.1.21317.1.3.2.2.2.1.3.1.9 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Device power Factor value. If the device does not support this OID, it returns: not-support. | |||||||||||||
| TdeviceOutletStatusTable | 1.3.6.1.4.1.21317.1.3.2.2.2.1.5 | NA | |||||||||||
table · not-accessible · current Device outlet status value table. | |||||||||||||
| RdeviceOutletStatusEntry | 1.3.6.1.4.1.21317.1.3.2.2.2.1.5.1 | NA | |||||||||||
row · not-accessible · current Single deviceOutletStatus entry containing device info. | |||||||||||||
| CdeviceOutletStatusIndex | 1.3.6.1.4.1.21317.1.3.2.2.2.1.5.1.1 | INTEGER (1..30) | RO | ||||||||||
column · INTEGER (1..30) · read-only · current Index of deviceOutletStatus | |||||||||||||
| CdisplayOutletStatus | 1.3.6.1.4.1.21317.1.3.2.2.2.1.5.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Display outlet status.
| |||||||||||||
| TdeviceConfigTable | 1.3.6.1.4.1.21317.1.3.2.2.2.1.6 | NA | |||||||||||
table · not-accessible · current Device configuration table | |||||||||||||
| RdeviceConfigEntry | 1.3.6.1.4.1.21317.1.3.2.2.2.1.6.1 | NA | |||||||||||
row · not-accessible · current Single deviceConfig entry containing device info.
| |||||||||||||
| CdeviceConfigIndex | 1.3.6.1.4.1.21317.1.3.2.2.2.1.6.1.1 | INTEGER (1) | RO | ||||||||||
column · INTEGER (1) · read-only · current Index of deviceConfig | |||||||||||||
| CdeviceMinCurMT | 1.3.6.1.4.1.21317.1.3.2.2.2.1.6.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set device minimum electric current measurement threshold. Example: range 0.0~32.0 represents 0~320. NOTICE: Minimum threshold should be smaller than maximum threshold. Empty value: -3000. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| CdeviceMaxCurMT | 1.3.6.1.4.1.21317.1.3.2.2.2.1.6.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set device maximum electric current measurement threshold. Example: range 0.0~32.0 represents 0~320 NOTICE: Minimum threshold should be smaller than maximum threshold. Empty value: -3000. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| CdeviceMinVolMT | 1.3.6.1.4.1.21317.1.3.2.2.2.1.6.1.4 | INTEGER (900..2600 | -3000) | RW | ||||||||||
column · INTEGER (900..2600 | -3000) · read-write · current Display or set device minimum voltage measurement threshold. Exapmple: range 90.0~260.0 represents 900~2600 NOTICE: Minimum threshold should be smaller than maximum threshold. Empty value: -3000. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| CdeviceMaxVolMT | 1.3.6.1.4.1.21317.1.3.2.2.2.1.6.1.5 | INTEGER (900..2600 | -3000) | RW | ||||||||||
column · INTEGER (900..2600 | -3000) · read-write · current Display or set device maximum voltage measurement threshold. Example: range 90.0~260.0 represents 900~2600 NOTICE: Minimum threshold should be smaller than maximum threshold. Empty value: -3000. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| CdeviceMinPMT | 1.3.6.1.4.1.21317.1.3.2.2.2.1.6.1.6 | INTEGER (0..99999 | -3000) | RW | ||||||||||
column · INTEGER (0..99999 | -3000) · read-write · current Display or set device minimum power measurement threshold. Example: range 0.0 ~ 9999.9 represents 0~99999 NOTICE: Minimum threshold should be smaller than maximum threshold. Empty value: -3000. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| CdeviceMaxPMT | 1.3.6.1.4.1.21317.1.3.2.2.2.1.6.1.7 | INTEGER (0..99999 | -3000) | RW | ||||||||||
column · INTEGER (0..99999 | -3000) · read-write · current Display or set device maximum power measurement threshold. Example: range 0.0 ~ 9999.9 represents 0~99999 NOTICE: Minimum threshold should be smaller than maximum threshold. Empty value: -3000. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| CdeviceMaxPDMT | 1.3.6.1.4.1.21317.1.3.2.2.2.1.6.1.8 | INTEGER (0..999990 | -3000) | RW | ||||||||||
column · INTEGER (0..999990 | -3000) · read-write · current Display or set device maximum power dissipation measurement threshold. Example: range 0.0 ~ 99999.0 represents 0~999990 NOTICE: Minimum threshold should be smaller than maximum threshold. Empty value: -3000. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| TdeviceSensorTresholdTable | 1.3.6.1.4.1.21317.1.3.2.2.2.1.7 | NA | |||||||||||
table · not-accessible · current Device environment value table | |||||||||||||
| RdeviceSensorTresholdEntry | 1.3.6.1.4.1.21317.1.3.2.2.2.1.7.1 | NA | |||||||||||
row · not-accessible · current Device's sensor Environment entry containing sensor info. | |||||||||||||
| CdeviceSensorTresholdIndex | 1.3.6.1.4.1.21317.1.3.2.2.2.1.7.1.1 | INTEGER (1..6) | RO | ||||||||||
column · INTEGER (1..6) · read-only · current Index of sensor number | |||||||||||||
| CsensorMinTempMT | 1.3.6.1.4.1.21317.1.3.2.2.2.1.7.1.2 | INTEGER (-200..600 | -3000) | RW | ||||||||||
column · INTEGER (-200..600 | -3000) · read-write · current Display or set sensor minimum temperature measurement threshold. Example: range -20.0 ~ 60.0 represents -200~600 NOTICE: Minimum threshold should be smaller than maximum threshold. Empty value: -3000. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| CsensorMaxTempMT | 1.3.6.1.4.1.21317.1.3.2.2.2.1.7.1.3 | INTEGER (-200..600 | -3000) | RW | ||||||||||
column · INTEGER (-200..600 | -3000) · read-write · current Display or set sensor maximum temperature measurement threshold. Example: range -20.0 ~ 60.0 represents -200~600 NOTICE: Minimum threshold should be smaller than maximum threshold. Empty value: -3000. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| CsensorMinHumMT | 1.3.6.1.4.1.21317.1.3.2.2.2.1.7.1.4 | INTEGER (150..950 | -3000) | RW | ||||||||||
column · INTEGER (150..950 | -3000) · read-write · current Display or set sensor minimum humidity measurement threshold. Example: range 15.0 ~ 95.0 represents 150~950 NOTICE: Minimum threshold should be smaller than maximum threshold. Empty value: -3000. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| CsensorMaxHumMT | 1.3.6.1.4.1.21317.1.3.2.2.2.1.7.1.5 | INTEGER (150..950 | -3000) | RW | ||||||||||
column · INTEGER (150..950 | -3000) · read-write · current Display or set sensor maximum humidity measurement threshold. Example: range 15.0 ~ 95.0 represents 150~950 NOTICE: Minimum threshold should be smaller than maximum threshold. Empty value: -3000. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| CsensorMinPressMT | 1.3.6.1.4.1.21317.1.3.2.2.2.1.7.1.6 | INTEGER (-2500..2500 | -3000) | RW | ||||||||||
column · INTEGER (-2500..2500 | -3000) · read-write · current Display or set sensor minimum pressure measurement threshold. Example: range -250.0 ~ 250.0 represents -2500 ~ 2500 NOTICE: Minimum threshold should be smaller than maximum threshold. Empty value: -3000. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| CsensorMaxPressMT | 1.3.6.1.4.1.21317.1.3.2.2.2.1.7.1.7 | INTEGER (-2500..2500 | -3000) | RW | ||||||||||
column · INTEGER (-2500..2500 | -3000) · read-write · current Display or set sensor maximum pressure measurement threshold. Example: range -250.0 ~ 250.0 represents -2500 ~ 2500 NOTICE: Minimum threshold should be smaller than maximum threshold. Empty value: -3000. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| SdeviceOutletControl | 1.3.6.1.4.1.21317.1.3.2.2.2.1.8 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This function is used for all outlet ports control. Set off(1) to turn off for all outlet ports. Set on(2) to turn on for all outlet ports. Get this object always return nostatus(3), because there is no device status.
| |||||||||||||
| SdeviceOutletReboot | 1.3.6.1.4.1.21317.1.3.2.2.2.1.9 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This function is used for all outlet ports to reboot. Only when outlet status is ON can do outlet reboot action to all ports. Set yes(2) to reboot all outlet ports. Get this object always return no(1).
| |||||||||||||
| Sswitchable | 1.3.6.1.4.1.21317.1.3.2.2.2.1.10 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Outlet is switchable or not.
| |||||||||||||
| Sperportreading | 1.3.6.1.4.1.21317.1.3.2.2.2.1.11 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Outlet is per-port reading or not.
| |||||||||||||
| Ssensornumber | 1.3.6.1.4.1.21317.1.3.2.2.2.1.12 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Sensor number. | |||||||||||||
| Soutletnumber | 1.3.6.1.4.1.21317.1.3.2.2.2.1.13 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Outlet number. | |||||||||||||
| Sbanknumber | 1.3.6.1.4.1.21317.1.3.2.2.2.1.14 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Bank number. | |||||||||||||
| NdoorSensor | 1.3.6.1.4.1.21317.1.3.2.2.2.1.16 | ||||||||||||
| SdoorSensorStatus | 1.3.6.1.4.1.21317.1.3.2.2.2.1.16.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Display door sensor status. close(0) represents door close. open(1) represents door open. not-attached(2) represents door sensor don't attach to device.
| |||||||||||||
| SdoorSensorType | 1.3.6.1.4.1.21317.1.3.2.2.2.1.16.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Door Sensor Type Selection
| |||||||||||||
| Npop | 1.3.6.1.4.1.21317.1.3.2.2.2.1.17 | ||||||||||||
| SenablePOPmode | 1.3.6.1.4.1.21317.1.3.2.2.2.1.17.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable POP mode.
| |||||||||||||
| SpopThreshold | 1.3.6.1.4.1.21317.1.3.2.2.2.1.17.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current (-1)means default value same as Bank Max Current 16 A. Example: range 0.0~32.0 represents 0~320 You can define the POP threshold or set as default(-1) value. | |||||||||||||
| SenableOutletPOPmode | 1.3.6.1.4.1.21317.1.3.2.2.2.1.17.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable Outlet POP mode.
| |||||||||||||
| SenableLIFOPOPmode | 1.3.6.1.4.1.21317.1.3.2.2.2.1.17.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable LIFO POP mode.
| |||||||||||||
| SenablePriorityPOPmode | 1.3.6.1.4.1.21317.1.3.2.2.2.1.17.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable Priority POP mode.
| |||||||||||||
| Ncap | 1.3.6.1.4.1.21317.1.3.2.2.2.1.18 | ||||||||||||
| SenableCAPmode | 1.3.6.1.4.1.21317.1.3.2.2.2.1.18.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable/Disable CAP mode.
| |||||||||||||
| ToutletCAPTable | 1.3.6.1.4.1.21317.1.3.2.2.2.1.18.2 | NA | |||||||||||
table · not-accessible · current Outlet CAP table | |||||||||||||
| RoutletCAPEntry | 1.3.6.1.4.1.21317.1.3.2.2.2.1.18.2.1 | NA | |||||||||||
| CoutletCAPIndex | 1.3.6.1.4.1.21317.1.3.2.2.2.1.18.2.1.1 | INTEGER (1..40) | RO | ||||||||||
column · INTEGER (1..40) · read-only · current Index of outlet's CAP configuration | |||||||||||||
| CoutletCAPPriority | 1.3.6.1.4.1.21317.1.3.2.2.2.1.18.2.1.2 | INTEGER (0..99) | RW | ||||||||||
column · INTEGER (0..99) · read-write · current Display or set the CAP Priority of outlet. Priority 0 means this outlet does not support this OID. | |||||||||||||
| SoutletInitMode | 1.3.6.1.4.1.21317.1.3.2.2.2.1.19 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current choose outlet init mode you want.
| |||||||||||||
| TdeviceIntegerValueTable | 1.3.6.1.4.1.21317.1.3.2.2.2.1.99 | NA | |||||||||||
table · not-accessible · current Device value table. This table displays device's current, voltage, power and power dissipation. | |||||||||||||
| RdeviceIntegerValueEntry | 1.3.6.1.4.1.21317.1.3.2.2.2.1.99.1 | NA | |||||||||||
row · not-accessible · current Single deviceValue entry containing device info. | |||||||||||||
| CdeviceIntegerValueIndex | 1.3.6.1.4.1.21317.1.3.2.2.2.1.99.1.1 | INTEGER (1) | RO | ||||||||||
column · INTEGER (1) · read-only · current Index of deviceValue. | |||||||||||||
| CdeviceIntegerCurrent | 1.3.6.1.4.1.21317.1.3.2.2.2.1.99.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Device electric current value. This value indicates that 1,000 times. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| CdeviceIntegerVoltage | 1.3.6.1.4.1.21317.1.3.2.2.2.1.99.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Device voltage value. This value indicates that 1,000 times. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| CdeviceIntegerPower | 1.3.6.1.4.1.21317.1.3.2.2.2.1.99.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Device power value. This value indicates that 1,000 times. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| CdeviceIntegerPowerDissipation | 1.3.6.1.4.1.21317.1.3.2.2.2.1.99.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Device power dissipation value. This value indicates that 1,000 times. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| TsensorIntegerValueTable | 1.3.6.1.4.1.21317.1.3.2.2.2.1.100 | NA | |||||||||||
table · not-accessible · current Device's sensor value table. This table displays sensor's temperature, humidity and pressure. | |||||||||||||
| RsensorIntegerValueEntry | 1.3.6.1.4.1.21317.1.3.2.2.2.1.100.1 | NA | |||||||||||
row · not-accessible · current Single device's sensor value entry containing device info. | |||||||||||||
| CsensorIntegerValueIndex | 1.3.6.1.4.1.21317.1.3.2.2.2.1.100.1.1 | INTEGER (1..6) | RO | ||||||||||
column · INTEGER (1..6) · read-only · current Index of sensor number. | |||||||||||||
| CsensorIntegerTemperature | 1.3.6.1.4.1.21317.1.3.2.2.2.1.100.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Sensor's Temperature value. This value indicates that 1,000 times. If this measurement value is not available, it returns value -1000000. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| CsensorIntegerHumidity | 1.3.6.1.4.1.21317.1.3.2.2.2.1.100.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Sensor's Humidity value. This value indicates that 1,000 times. If this measurement value is not available, it returns value -1000000. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| CsensorIntegerPressure | 1.3.6.1.4.1.21317.1.3.2.2.2.1.100.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Sensor's Pressure value. This value indicates that 1,000 times. If this measurement value is not available, it returns value -1000000. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| Noutlet | 1.3.6.1.4.1.21317.1.3.2.2.2.2 | ||||||||||||
| ToutletValueTable | 1.3.6.1.4.1.21317.1.3.2.2.2.2.1 | NA | |||||||||||
table · not-accessible · current Display total outlet value table | |||||||||||||
| RoutletValueEntry | 1.3.6.1.4.1.21317.1.3.2.2.2.2.1.1 | NA | |||||||||||
| CoutletValueIndex | 1.3.6.1.4.1.21317.1.3.2.2.2.2.1.1.1 | INTEGER (1..30) | RO | 1 | |||||||||
| CoutletMaxCurrent | 1.3.6.1.4.1.21317.1.3.2.2.2.2.1.1.6 | INTEGER | RO | 18 | |||||||||
column · INTEGER · read-only · current Outlet Max Current value. unit: (A). If the device does not support this OID, we show value 0. Example values from LibreNMS test devices
| |||||||||||||
| CoutletPowerFactor | 1.3.6.1.4.1.21317.1.3.2.2.2.2.1.1.7 | DisplayString | RO | 1.00 | |||||||||
| Soutlet1Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.2 | INTEGER | RW | on(2) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 1 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet2Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.3 | INTEGER | RW | on(2) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 2 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet3Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.4 | INTEGER | RW | on(2) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 3 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet4Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.5 | INTEGER | RW | on(2) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 4 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet5Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.6 | INTEGER | RW | on(2) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 5 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet6Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.7 | INTEGER | RW | on(2) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 6 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet7Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.8 | INTEGER | RW | on(2) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 7 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet8Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.9 | INTEGER | RW | on(2) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 8 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| ToutletConfigTable | 1.3.6.1.4.1.21317.1.3.2.2.2.2.10 | NA | |||||||||||
table · not-accessible · current Outlet configuration table | |||||||||||||
| RoutletConfigEntry | 1.3.6.1.4.1.21317.1.3.2.2.2.2.10.1 | NA | |||||||||||
| CoutletConfigIndex | 1.3.6.1.4.1.21317.1.3.2.2.2.2.10.1.1 | INTEGER (1..30) | RO | 1 | |||||||||
| CoutletName | 1.3.6.1.4.1.21317.1.3.2.2.2.2.10.1.2 | DisplayString | RW | 01 | |||||||||
column · DisplayString · read-write · current Display or set the name of outlet. If the device does not support this OID, we show n/a. string length: 0~15 NOTE: Input string as /empty to set this object to NULL. | |||||||||||||
| CoutletConfirmation | 1.3.6.1.4.1.21317.1.3.2.2.2.2.10.1.3 | INTEGER | RW | no(1) | |||||||||
| CoutletOnDelayTime | 1.3.6.1.4.1.21317.1.3.2.2.2.2.10.1.4 | INTEGER (0..999 | -1) | RW | 5 | |||||||||
| CoutletOffDelayTime | 1.3.6.1.4.1.21317.1.3.2.2.2.2.10.1.5 | INTEGER (0..999 | -1) | RW | 1 | |||||||||
| CoutletShutdownMethod | 1.3.6.1.4.1.21317.1.3.2.2.2.2.10.1.6 | INTEGER | RW | kill-the-power(1) | |||||||||
| CoutletMAC | 1.3.6.1.4.1.21317.1.3.2.2.2.2.10.1.7 | DisplayString | RW | 000000000000 | |||||||||
| CoutletMinCurMT | 1.3.6.1.4.1.21317.1.3.2.2.2.2.10.1.8 | INTEGER | RW | -3000 | |||||||||
column · INTEGER · read-write · current Display or set the outlet minimum electric current measurment threshold. Example: range 0.0 ~16.0 rerpresnts 0~160 NOTICE: Minimum threshold should be smaller than maximum threshold. Empty value: -3000. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| CoutletMaxCurMT | 1.3.6.1.4.1.21317.1.3.2.2.2.2.10.1.9 | INTEGER | RW | -3000 | |||||||||
column · INTEGER · read-write · current Display or set the outlet maximum electric current measurment threshold. Example: range 0.0 ~16.0 represents 0~160 NOTICE: Minimum threshold should be smaller than maximum threshold. Empty value: -3000. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| CoutletMinVolMT | 1.3.6.1.4.1.21317.1.3.2.2.2.2.10.1.10 | INTEGER (900..2600 | -3000 | -2000000) | RW | -3000 | |||||||||
column · INTEGER (900..2600 | -3000 | -2000000) · read-write · current Display or set the outlet minimum voltage measurment threshold. Example: range 90.0 ~260.0 represents 900~2600 NOTICE: Minimum threshold should be smaller than maximum threshold. Empty value: -3000. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| CoutletMaxVolMT | 1.3.6.1.4.1.21317.1.3.2.2.2.2.10.1.11 | INTEGER (900..2600 | -3000 | -2000000) | RW | -3000 | |||||||||
column · INTEGER (900..2600 | -3000 | -2000000) · read-write · current Display or set the outlet maximum voltage measurment threshold. Example: range 90.0 ~260.0 represents 900~2600 NOTICE: Minimum threshold should be smaller than maximum threshold. Empty value: -3000. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| CoutletMinPMT | 1.3.6.1.4.1.21317.1.3.2.2.2.2.10.1.12 | INTEGER (0..99999 | -3000 | -2000000) | RW | -3000 | |||||||||
column · INTEGER (0..99999 | -3000 | -2000000) · read-write · current Display or set the outlet minimum power measurment threshold. Example: range 0.0 ~ 9999.9 represents 0~99999 NOTICE: Minimum threshold should be smaller than maximum threshold. Empty value: -3000. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| CoutletMaxPMT | 1.3.6.1.4.1.21317.1.3.2.2.2.2.10.1.13 | INTEGER (0..99999 | -3000 | -2000000) | RW | -3000 | |||||||||
column · INTEGER (0..99999 | -3000 | -2000000) · read-write · current Display or set the outlet maximum power measurment threshold. Example: range 0.0 ~ 9999.9 represents 0~99999 NOTICE: Minimum threshold should be smaller than maximum threshold. Empty value: -3000. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| CoutletMaxPDMT | 1.3.6.1.4.1.21317.1.3.2.2.2.2.10.1.14 | INTEGER (0..999990 | -3000 | -2000000) | RW | -3000 | |||||||||
column · INTEGER (0..999990 | -3000 | -2000000) · read-write · current Display or set the outlet maximum power dissipation measurment threshold. Example: range 0.0 ~ 99999.0 represents 0~999990 NOTICE: Minimum threshold should be smaller than maximum threshold. Empty value: -3000. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| Soutlet9Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.11 | INTEGER | RW | on(2) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 9 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet10Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.12 | INTEGER | RW | on(2) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 10 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet11Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.13 | INTEGER | RW | on(2) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 11 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet12Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.14 | INTEGER | RW | on(2) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 12 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet13Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.15 | INTEGER | RW | on(2) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 13 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet14Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.16 | INTEGER | RW | on(2) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 14 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet15Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.17 | INTEGER | RW | on(2) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 15 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet16Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.18 | INTEGER | RW | on(2) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 16 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet17Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.19 | INTEGER | RW | not-support(7) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 17 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet18Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.20 | INTEGER | RW | not-support(7) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 18 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet19Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.21 | INTEGER | RW | not-support(7) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 19 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet20Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.22 | INTEGER | RW | not-support(7) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 20 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet21Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.23 | INTEGER | RW | not-support(7) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 21 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet22Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.24 | INTEGER | RW | not-support(7) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 22 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet23Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.25 | INTEGER | RW | not-support(7) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 23 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet24Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.26 | INTEGER | RW | not-support(7) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 24 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet25Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.27 | INTEGER | RW | not-support(7) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 25 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet26Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.28 | INTEGER | RW | not-support(7) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 26 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet27Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.29 | INTEGER | RW | not-support(7) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 27 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet28Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.30 | INTEGER | RW | not-support(7) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 28 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet29Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.31 | INTEGER | RW | not-support(7) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 29 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet30Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.32 | INTEGER | RW | not-support(7) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 30 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet31Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.33 | INTEGER | RW | not-support(7) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 31 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet32Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.34 | INTEGER | RW | not-support(7) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 32 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet33Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.35 | INTEGER | RW | not-support(7) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 33 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet34Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.36 | INTEGER | RW | not-support(7) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 34 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet35Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.37 | INTEGER | RW | not-support(7) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 35 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet36Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.38 | INTEGER | RW | not-support(7) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 36 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet37Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.39 | INTEGER | RW | not-support(7) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 37 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet38Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.40 | INTEGER | RW | not-support(7) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 38 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet39Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.41 | INTEGER | RW | not-support(7) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 39 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet40Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.42 | INTEGER | RW | not-support(7) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 40 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet41Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.43 | INTEGER | RW | not-support(7) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 41 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| Soutlet42Status | 1.3.6.1.4.1.21317.1.3.2.2.2.2.44 | INTEGER | RW | not-support(7) | |||||||||
scalar · INTEGER · read-write · current Display and control outlet 42 status. Can't set pending status.
Example values from LibreNMS test devices
| |||||||||||||
| ToutletSwitchableTable | 1.3.6.1.4.1.21317.1.3.2.2.2.2.70 | NA | |||||||||||
| RoutletSwitchableEntry | 1.3.6.1.4.1.21317.1.3.2.2.2.2.70.1 | NA | |||||||||||
row · not-accessible · current | |||||||||||||
| CoutletSwitchableIndex | 1.3.6.1.4.1.21317.1.3.2.2.2.2.70.1.1 | INTEGER (1..30) | RO | 1 | |||||||||
| CoutletSwitchable | 1.3.6.1.4.1.21317.1.3.2.2.2.2.70.1.2 | INTEGER | RO | yes(2) | |||||||||
| ToutletIntegerValueTable | 1.3.6.1.4.1.21317.1.3.2.2.2.2.99 | NA | |||||||||||
table · not-accessible · current Display total outlet value table | |||||||||||||
| RoutletIntegerValueEntry | 1.3.6.1.4.1.21317.1.3.2.2.2.2.99.1 | NA | |||||||||||
row · not-accessible · current Single outletValue entry containing outlet info. | |||||||||||||
| CoutletIntegerValueIndex | 1.3.6.1.4.1.21317.1.3.2.2.2.2.99.1.1 | INTEGER (1..30) | RO | 1 | |||||||||
| CoutletIntegerCurrent | 1.3.6.1.4.1.21317.1.3.2.2.2.2.99.1.2 | INTEGER | RO | 0 | |||||||||
| CoutletIntegerVoltage | 1.3.6.1.4.1.21317.1.3.2.2.2.2.99.1.3 | INTEGER | RO | 238440 | |||||||||
| CoutletIntegerPower | 1.3.6.1.4.1.21317.1.3.2.2.2.2.99.1.4 | INTEGER | RO | 0 | |||||||||
| CoutletIntegerPowerDissipation | 1.3.6.1.4.1.21317.1.3.2.2.2.2.99.1.5 | INTEGER | RO | 0 | |||||||||
| Nbank | 1.3.6.1.4.1.21317.1.3.2.2.2.3 | ||||||||||||
| TbreakerStatusTable | 1.3.6.1.4.1.21317.1.3.2.2.2.3.1 | NA | |||||||||||
table · not-accessible · current Display total bank value table | |||||||||||||
| RbreakerStatusEntry | 1.3.6.1.4.1.21317.1.3.2.2.2.3.1.1 | NA | |||||||||||
| CbreakerStatusIndex | 1.3.6.1.4.1.21317.1.3.2.2.2.3.1.1.1 | INTEGER (1..30) | RO | ||||||||||
column · INTEGER (1..30) · read-only · current Index of breaker number. | |||||||||||||
| CbreakerStatus | 1.3.6.1.4.1.21317.1.3.2.2.2.3.1.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Breaker status.
| |||||||||||||
| TbankValueTable | 1.3.6.1.4.1.21317.1.3.2.2.2.3.2 | NA | |||||||||||
table · not-accessible · current Display total bank value table | |||||||||||||
| RbankValueEntry | 1.3.6.1.4.1.21317.1.3.2.2.2.3.2.1 | NA | |||||||||||
| CbankValueIndex | 1.3.6.1.4.1.21317.1.3.2.2.2.3.2.1.1 | INTEGER (1..30) | RO | ||||||||||
column · INTEGER (1..30) · read-only · current Index of bank number | |||||||||||||
| CbankMaxCurrent | 1.3.6.1.4.1.21317.1.3.2.2.2.3.2.1.6 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The Bank Max Current value. unit: (A) EC1000:0A~320A | |||||||||||||
| CbankAttachStatus | 1.3.6.1.4.1.21317.1.3.2.2.2.3.2.1.7 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The status of Energy sensor Bank attached status.
| |||||||||||||
| CbankPowerFactor | 1.3.6.1.4.1.21317.1.3.2.2.2.3.2.1.8 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Bank Power Factor value. If the device does not support this OID, it returns: not-support. | |||||||||||||
| TbankConfigTable | 1.3.6.1.4.1.21317.1.3.2.2.2.3.3 | NA | |||||||||||
table · not-accessible · current Bank configuration table | |||||||||||||
| RbankConfigEntry | 1.3.6.1.4.1.21317.1.3.2.2.2.3.3.1 | NA | |||||||||||
| CbankConfigIndex | 1.3.6.1.4.1.21317.1.3.2.2.2.3.3.1.1 | INTEGER (1..30) | RO | ||||||||||
column · INTEGER (1..30) · read-only · current Index of bank number | |||||||||||||
| CbankName | 1.3.6.1.4.1.21317.1.3.2.2.2.3.3.1.2 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current Display or set the name of bank. When this model does not support the OID, we show n/a. string length: 0~15 NOTE: Input string as /empty to set this object to NULL. | |||||||||||||
| CbankMinCurMT | 1.3.6.1.4.1.21317.1.3.2.2.2.3.3.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set the outlet minimum electric current measurment threshold. Example: range 0.0 ~16.0 rerpresnts 0~160 NOTICE: Minimum threshold should be smaller than maximum threshold. Empty value: -3000. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| CbankMaxCurMT | 1.3.6.1.4.1.21317.1.3.2.2.2.3.3.1.4 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Display or set the outlet maximum electric current measurment threshold. Example: range 0.0 ~16.0 represents 0~160 NOTICE: Minimum threshold should be smaller than maximum threshold. Empty value: -3000. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| CbankMinVolMT | 1.3.6.1.4.1.21317.1.3.2.2.2.3.3.1.5 | INTEGER (900..2600 | -3000 | -2000000) | RW | ||||||||||
column · INTEGER (900..2600 | -3000 | -2000000) · read-write · current Display or set the outlet minimum voltage measurment threshold. Example: range 90.0 ~260.0 represents 900~2600 NOTICE: Minimum threshold should be smaller than maximum threshold. Empty value: -3000. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| CbankMaxVolMT | 1.3.6.1.4.1.21317.1.3.2.2.2.3.3.1.6 | INTEGER (900..2600 | -3000 | -2000000) | RW | ||||||||||
column · INTEGER (900..2600 | -3000 | -2000000) · read-write · current Display or set the outlet maximum voltage measurment threshold. Example: range 90.0 ~260.0 represents 900~2600 NOTICE: Minimum threshold should be smaller than maximum threshold. Empty value: -3000. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| CbankMinPMT | 1.3.6.1.4.1.21317.1.3.2.2.2.3.3.1.7 | INTEGER (0..99999 | -3000 | -2000000) | RW | ||||||||||
column · INTEGER (0..99999 | -3000 | -2000000) · read-write · current Display or set the outlet minimum power measurment threshold. Example: range 0.0 ~ 9999.9 represents 0~99999 NOTICE: Minimum threshold should be smaller than maximum threshold. Empty value: -3000. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| CbankMaxPMT | 1.3.6.1.4.1.21317.1.3.2.2.2.3.3.1.8 | INTEGER (0..99999 | -3000 | -2000000) | RW | ||||||||||
column · INTEGER (0..99999 | -3000 | -2000000) · read-write · current Display or set the outlet maximum power measurment threshold. Example: range 0.0 ~ 9999.9 represents 0~99999 NOTICE: Minimum threshold should be smaller than maximum threshold. Empty value: -3000. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| CbankMaxPDMT | 1.3.6.1.4.1.21317.1.3.2.2.2.3.3.1.9 | INTEGER (0..999990 | -3000 | -2000000) | RW | ||||||||||
column · INTEGER (0..999990 | -3000 | -2000000) · read-write · current Display or set the outlet maximum power dissipation measurment threshold. Example: range 0.0 ~ 99999.0 represents 0~999990 NOTICE: Minimum threshold should be smaller than maximum threshold. Empty value: -3000. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| TbankControlTable | 1.3.6.1.4.1.21317.1.3.2.2.2.3.4 | NA | |||||||||||
table · not-accessible · current Bank Control table | |||||||||||||
| RbankControlEntry | 1.3.6.1.4.1.21317.1.3.2.2.2.3.4.1 | NA | |||||||||||
| CbankControlIndex | 1.3.6.1.4.1.21317.1.3.2.2.2.3.4.1.1 | INTEGER (1..4) | RO | ||||||||||
column · INTEGER (1..4) · read-only · current Index of bank number | |||||||||||||
| CbankControlStatus | 1.3.6.1.4.1.21317.1.3.2.2.2.3.4.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This function is used for outlet control of bank. Set off(1) to turn off for outlet control of bank. Set on(2) to turn on for all outlet control of bank. Set reboot(3) to turn on for outlet control of bank. Get this object always return nostatus(3), because there is no bank status.
| |||||||||||||
| TbankIntegerValueTable | 1.3.6.1.4.1.21317.1.3.2.2.2.3.99 | NA | |||||||||||
table · not-accessible · current Display total bank value table | |||||||||||||
| RbankIntegerValueEntry | 1.3.6.1.4.1.21317.1.3.2.2.2.3.99.1 | NA | |||||||||||
row · not-accessible · current Single bankValue entry containing bank info. | |||||||||||||
| CbankIntegerValueIndex | 1.3.6.1.4.1.21317.1.3.2.2.2.3.99.1.1 | INTEGER (1..30) | RO | ||||||||||
column · INTEGER (1..30) · read-only · current Index of bank number. | |||||||||||||
| CbankIntegerCurrent | 1.3.6.1.4.1.21317.1.3.2.2.2.3.99.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Bank electric current value. This value indicates that 1,000 times. If this measurement value is not available, it returns value -1000000. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| CbankIntegerVoltage | 1.3.6.1.4.1.21317.1.3.2.2.2.3.99.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Bank voltage value. This value indicates that 1,000 times. We put this OID to write access type for user to set the reference voltage on EC1000 model. And the setting should be the numbers. You can set 0 to clear the setting. If this measurement value is not available, it returns value -1000000. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| CbankIntegerPower | 1.3.6.1.4.1.21317.1.3.2.2.2.3.99.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Bank power value. This value indicates that 1,000 times. If this measurement value is not available, it returns value -1000000. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| CbankIntegerPowerDissipation | 1.3.6.1.4.1.21317.1.3.2.2.2.3.99.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Bank power dissipation value. This value indicates that 1,000 times. If this measurement value is not available, it returns value -1000000. If the device does not support this OID, it returns value -2000000. | |||||||||||||
| NdeviceManagement | 1.3.6.1.4.1.21317.1.3.2.2.3 | ||||||||||||
| Nconfig | 1.3.6.1.4.1.21317.1.3.2.2.3.4 | ||||||||||||
| SdeviceMAC | 1.3.6.1.4.1.21317.1.3.2.2.3.4.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Display device MAC address. | |||||||||||||
| SdeviceIPv4 | 1.3.6.1.4.1.21317.1.3.2.2.3.4.2 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current Display device IP address. | |||||||||||||
| SdeviceFWversion | 1.3.6.1.4.1.21317.1.3.2.2.3.4.3 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Display device FW version. | |||||||||||||
| NdashBoard | 1.3.6.1.4.1.21317.1.3.2.2.3.4.4 | ||||||||||||
| SdashboardRow | 1.3.6.1.4.1.21317.1.3.2.2.3.4.4.1 | INTEGER (1..26) | RW | ||||||||||
scalar · INTEGER (1..26) · read-write · current Display or set device's dashboard row number. | |||||||||||||
| SdashboardColumn | 1.3.6.1.4.1.21317.1.3.2.2.3.4.4.2 | INTEGER (1..26) | RW | ||||||||||
scalar · INTEGER (1..26) · read-write · current Display or set device's dashboard column number. | |||||||||||||
| SdashboardRackName | 1.3.6.1.4.1.21317.1.3.2.2.3.4.4.3 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Display or set device's dashboard rack name. string length: 1~32 NOTE: Input string as /empty to set this object to NULL. | |||||||||||||
| NservicePorts | 1.3.6.1.4.1.21317.1.3.2.2.3.4.5 | ||||||||||||
| ShttpPort | 1.3.6.1.4.1.21317.1.3.2.2.3.4.5.1 | INTEGER (1..65535) | RW | ||||||||||
scalar · INTEGER (1..65535) · read-write · current Display or set the HTTP port of PE device. | |||||||||||||
| ShttpsPort | 1.3.6.1.4.1.21317.1.3.2.2.3.4.5.2 | INTEGER (1..65535) | RW | ||||||||||
scalar · INTEGER (1..65535) · read-write · current Display or set the HTTPs port of PE device. | |||||||||||||
| ShttpsOnlyEnable | 1.3.6.1.4.1.21317.1.3.2.2.3.4.5.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable to use Webpage HTTPs only or disable to use Webpage HTTP/HTTPs
| |||||||||||||
| Nipv4config | 1.3.6.1.4.1.21317.1.3.2.2.3.4.6 | ||||||||||||
| SstaticIPEnabled | 1.3.6.1.4.1.21317.1.3.2.2.3.4.6.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Display or set IPv4 address automatically or not
| |||||||||||||
| SfixedIPv4 | 1.3.6.1.4.1.21317.1.3.2.2.3.4.6.2 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Display or set fixed IPv4 address | |||||||||||||
| SsubnetMask | 1.3.6.1.4.1.21317.1.3.2.2.3.4.6.3 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Display or set subnet mask address | |||||||||||||
| Sgateway | 1.3.6.1.4.1.21317.1.3.2.2.3.4.6.4 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Display or set gateway address | |||||||||||||
| SstaticDNSEnabled | 1.3.6.1.4.1.21317.1.3.2.2.3.4.6.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Display or set DNS address automatically or not
| |||||||||||||
| SdnsPreferIPv4 | 1.3.6.1.4.1.21317.1.3.2.2.3.4.6.6 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Display or set prefer DNS address | |||||||||||||
| SdnsAlternateIPv4 | 1.3.6.1.4.1.21317.1.3.2.2.3.4.6.7 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Display or set alternate DNS address | |||||||||||||
| NeventNotification | 1.3.6.1.4.1.21317.1.3.2.2.3.4.7 | ||||||||||||
| Ndevicesnmp | 1.3.6.1.4.1.21317.1.3.2.2.3.4.7.1 | ||||||||||||
| StrapEnabled | 1.3.6.1.4.1.21317.1.3.2.2.3.4.7.1.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Indicates if this trap entry is enabled or not.
You should set the username/auth-password/priv-password first, when choosing snmpv3.
You should set the community string first, when choosing snmpv1/v2c.
| |||||||||||||
| StrapVersion | 1.3.6.1.4.1.21317.1.3.2.2.3.4.7.1.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Choose SNMP Trap version to send trap. You should set the username/auth-password/priv-password first, when choosing snmpv3. You should set the community string first, when choosing snmpv1/v2c.
| |||||||||||||
| TsnmpTrapTable | 1.3.6.1.4.1.21317.1.3.2.2.3.4.7.1.3 | NA | |||||||||||
table · not-accessible · current PE SNMP agent trap setup table. If users want to use trap, they must set enable trap, ip and community first. | |||||||||||||
| RsnmpTrapEntry | 1.3.6.1.4.1.21317.1.3.2.2.3.4.7.1.3.1 | NA | |||||||||||
row · not-accessible · current Single trap entry containing trap receiver info.
| |||||||||||||
| CtrapReceiverNumber | 1.3.6.1.4.1.21317.1.3.2.2.3.4.7.1.3.1.1 | INTEGER (1..2) | RO | ||||||||||
column · INTEGER (1..2) · read-only · current Index of trap receiver | |||||||||||||
| CtrapReceiverIPAddress | 1.3.6.1.4.1.21317.1.3.2.2.3.4.7.1.3.1.2 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current Trap receiver IP address | |||||||||||||
| CtrapPort | 1.3.6.1.4.1.21317.1.3.2.2.3.4.7.1.3.1.3 | INTEGER (1..65535) | RW | ||||||||||
column · INTEGER (1..65535) · read-write · current NMS trap port to be used by agent to send trap | |||||||||||||
| CtrapCommunity | 1.3.6.1.4.1.21317.1.3.2.2.3.4.7.1.3.1.4 | DisplayString (SIZE (0..20)) | RW | ||||||||||
column · DisplayString (SIZE (0..20)) · read-write · current If use SNMPv1/v2c to receive trap should set this Community string. MAX string length: 20 NOTE: Input string as /empty to set this object to NULL. | |||||||||||||
| CtrapUsername | 1.3.6.1.4.1.21317.1.3.2.2.3.4.7.1.3.1.5 | DisplayString (SIZE (0..20)) | RW | ||||||||||
column · DisplayString (SIZE (0..20)) · read-write · current If use SNMPv3 to receive trap should set this string. NOTE: Input string as /empty to set this object to NULL. MAX string length: 20 | |||||||||||||
| CtrapAuthpassword | 1.3.6.1.4.1.21317.1.3.2.2.3.4.7.1.3.1.6 | DisplayString (SIZE (8..20)) | RW | ||||||||||
column · DisplayString (SIZE (8..20)) · read-write · current If use SNMPv3 to receive trap should set this string. MAX string length: 20 NOTE: Input string as /empty to set this object to NULL. | |||||||||||||
| CtrapPrivpassword | 1.3.6.1.4.1.21317.1.3.2.2.3.4.7.1.3.1.7 | DisplayString (SIZE (8..20)) | RW | ||||||||||
column · DisplayString (SIZE (8..20)) · read-write · current If use SNMPv3 to receive trap should set this string. MAX string length: 20 NOTE: Input string as /empty to set this object to NULL. | |||||||||||||
| Nsyslog | 1.3.6.1.4.1.21317.1.3.2.2.3.4.7.2 | ||||||||||||
| SsysLogServerEnabled | 1.3.6.1.4.1.21317.1.3.2.2.3.4.7.2.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Display or set syslog server address automatically or not
| |||||||||||||
| SsysLogServerIPv4 | 1.3.6.1.4.1.21317.1.3.2.2.3.4.7.2.2 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Display or set syslog server address | |||||||||||||
| SsysLogServerPort | 1.3.6.1.4.1.21317.1.3.2.2.3.4.7.2.3 | INTEGER (1..65535) | RW | ||||||||||
scalar · INTEGER (1..65535) · read-write · current Display or set syslog server port | |||||||||||||
| Nsmtp | 1.3.6.1.4.1.21317.1.3.2.2.3.4.7.3 | ||||||||||||
| SsmtpServerEnabled | 1.3.6.1.4.1.21317.1.3.2.2.3.4.7.3.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Display or set SMTP server enable status.
| |||||||||||||
| SsmtpServerName | 1.3.6.1.4.1.21317.1.3.2.2.3.4.7.3.2 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Display or set a SMTP server name. NOTE: Input string as /empty to set this object to NULL. | |||||||||||||
| SsmtpAuthEnabled | 1.3.6.1.4.1.21317.1.3.2.2.3.4.7.3.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Display or set authentication of SMTP server.
| |||||||||||||
| SsmtpAccountName | 1.3.6.1.4.1.21317.1.3.2.2.3.4.7.3.4 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Display or set a user's name of SMTP server. NOTE: Input string as /empty to set this object to NULL. | |||||||||||||
| SsmtpAccountPwd | 1.3.6.1.4.1.21317.1.3.2.2.3.4.7.3.5 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Display or set a user's password of SMTP server. NOTE: Input string as /empty to set this object to NULL. | |||||||||||||
| SsmtpMailFrom | 1.3.6.1.4.1.21317.1.3.2.2.3.4.7.3.6 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Display or set a mail of SMTP server. NOTE: Input string as /empty to set this object to NULL. | |||||||||||||
| SsmtpMailTo | 1.3.6.1.4.1.21317.1.3.2.2.3.4.7.3.7 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Display or set a mail of SMTP server. NOTE: Input string as /empty to set this object to NULL. | |||||||||||||
| NconfigurationNotification | 1.3.6.1.4.1.21317.1.3.2.2.3.4.7.9 | ||||||||||||
| SconfigurationNotifyEnabled | 1.3.6.1.4.1.21317.1.3.2.2.3.4.7.9.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current
| |||||||||||||
| !configurationNotifyTrapMSG | 1.3.6.1.4.1.21317.1.3.2.2.3.4.7.9.2 | ||||||||||||
| NdateTime | 1.3.6.1.4.1.21317.1.3.2.2.3.4.8 | ||||||||||||
| NtimeZone | 1.3.6.1.4.1.21317.1.3.2.2.3.4.8.1 | ||||||||||||
| StimeZoneSetting | 1.3.6.1.4.1.21317.1.3.2.2.3.4.8.1.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Display or set the time zone of PE device.
(0) [GMT-12:00] Eniwetok Kwajalein
(1) [GMT-11:00] Midway Island Samoa
(2) [GMT-10:00] Hawaii
(3) [GMT-09:00] Alaska
(4) [GMT-08:00] Pacific Time (US & Canada); Tijuana
(5) [GMT-07:00] Mountain Time (US & Canada)
(6) [GMT-07:00] Arizona
(7) [GMT-06:00] Central Time (US & Canada)
(8) [GMT-06:00] Mexico City
(9) [GMT-06:00] Saskatchewan
(10)[GMT-06:00] Central America
(11)[GMT-05:00] Eastern Time (US & Canada)
(12)[GMT-05:00] Indiana (East)
(13)[GMT-05:00] Bogota Lima Quito
(14)[GMT-04:00] Atlantic Time (Canada)
(15)[GMT-04:00] Caracas La Paz
(16)[GMT-04:00] Santiago
(17)[GMT-03:30] Newfoundland
(18)[GMT-03:00] Buenos Aires Georgetown
(19)[GMT-03:00] Brasilia
(20)[GMT-03:00] Greenland
(21)[GMT-02:00] Mid-Atlantic
(22)[GMT-01:00] Azores
(23)[GMT-01:00] Cape Verde Is
(24)[GMT] Casablanca Monrovia
(25)[GMT] Greenwich Mean Time: Dublin Edinburgh Lisbon London
(26)[GMT+01:00] Amsterdam Copenhagen Madrid Paris Vilnius
(27)[GMT+01:00] West Central Africa
(28)[GMT+01:00] Belgrade Sarajevo Skopje Sofija Zagreb
(29)[GMT+01:00] Bratislava Budapest Ljubljana Prague Warsaw
(30)[GMT+01:00] Brussels Berlin Bern Rome Stockholm Vienna
(31)[GMT+02:00] Cairo
(32)[GMT+02:00] Harare Pretoria
(33)[GMT+02:00] Jerusalem
(34)[GMT+02:00] Bucharest
(35)[GMT+02:00] Helsinki Riga Tallinn
(36)[GMT+02:00] Athens Istanbul Minsk
(37)[GMT+03:00] Kuwait Riyadh
(38)[GMT+03:00] Nairobi
(39)[GMT+03:00] Baghdad
(40)[GMT+03:00] Moscow St. Petersburg Volgograd
(41)[GMT+03:30] Tehran
(42)[GMT+04:00] Abu Dhabi Muscat
(43)[GMT+04:00] Baku Tbilisi Yerevan
(44)[GMT+04:30] Kabul
(45)[GMT+05:00] Islamabad Karachi Tashkent
(46)[GMT+05:00] Ekaterinburg
(47)[GMT+05:30] Calcutta Chennai Mumbai New Delhi
(48)[GMT+05:45] Kathmandu
(49)[GMT+06:00] Astana Dhaka
(50)[GMT+06:00] Sri Jayawardenepura
(51)[GMT+06:00] Almaty Novosibirsk
(52)[GMT+06:30] Rangoon
(53)[GMT+07:00] Bangkok Hanoi Jakarta
(54)[GMT+07:00] Krasnoyarsk
(55)[GMT+08:00] Beijing Chongqing Hong Kong Urumqi
(56)[GMT+08:00] Perth
(57)[GMT+08:00] Kuala Lumpur Singapore
(58)[GMT+08:00] Taipei
(59)[GMT+08:00] Irkutsk Ulaan Bataar
(60)[GMT+09:00] Osaka Sapporo Tokyo
(61)[GMT+09:00] Seoul
(62)[GMT+09:00] Yakutsk
(63)[GMT+09:30] Darwin
(64)[GMT+09:30] Adelaide
(65)[GMT+10:00] Canberra Melbourne Sydney
(66)[GMT+10:00] Brisbane
(67)[GMT+10:00] Guam Port Moresby
(68)[GMT+10:00] Hobart
(69)[GMT+10:00] Vladivostok
(70)[GMT+11:00] Magadan Solomon Is New Caledonia
(71)[GMT+12:00] Fiji Kamchatka Marshall Is.
(72)[GMT+12:00] Auckland Wellington
(73)[GMT+13:00] Nuku'alofa | |||||||||||||
| SdstEnabled | 1.3.6.1.4.1.21317.1.3.2.2.3.4.8.1.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Display or set daylight savings time .
| |||||||||||||
| NmanualInput | 1.3.6.1.4.1.21317.1.3.2.2.3.4.8.2 | ||||||||||||
| SdateSetting | 1.3.6.1.4.1.21317.1.3.2.2.3.4.8.2.1 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Display or set date in a manual way.(This is Greenwich Mean Time, GMT)
string length: 10
This value format must match the following form:
YYYY-MM-DD
ex. 2011-01-01
Note: range of year: 2000-2099
range of month: 01-12
range of day: 01-31 | |||||||||||||
| StimeSetting | 1.3.6.1.4.1.21317.1.3.2.2.3.4.8.2.2 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Display or set time in a manual way.(This is Greenwich Mean Time, GMT)
string length: 8
This value format must match the following form:
HH:MM:SS
ex. 02:02:02
Note: range of hour: 00-24
range of minute: 00-60
range of second: 00-60 | |||||||||||||
| NnetworkTime | 1.3.6.1.4.1.21317.1.3.2.2.3.4.8.3 | ||||||||||||
| SautoAdjustEnabled | 1.3.6.1.4.1.21317.1.3.2.2.3.4.8.3.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Display or set date time useing auto adjustment way.
| |||||||||||||
| SpreferNTP | 1.3.6.1.4.1.21317.1.3.2.2.3.4.8.3.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Display or set prefer NTP server.
AU | ntp1.cs.mu.OZ.AU(0),
AU | ntp0.cs.mu.OZ.AU(1),
BE | ntp2.oma.be(2),
BE | ntp1.oma.be(3),
BR | ntps1.pads.ufrj.br(4),
CH | swisstime.ethz.ch(5),
CL | ntp.shoa.cl(6),
CZ | ntp.nic.cz(7),
DE | ntp.stairweb.de(8),
DE | ntps1-0.cs.tu-berlin.de(9),
DE | ptbtime1.ptb.de(10),
DE | ntp1.fau.de(11),
DE | ptbtime2.ptb.de(12),
DE | time1.one4vision.de(13),
DE | rustime01.rus.uni-stuttgart.de(14),
DE | ntp.probe-networks.de(15),
DE | ntp2.fau.de(16),
ES | hora.roa.es(17),
HK | stdtime.gov.hk(18),
IE | ntp-galway.hea.net(19),
IT | ntp1.inrim.it(20),
IT | ntp2.inrim.it(21),
JP | clock.tl.fukuoka-u.ac.jp(22),
JP | ntp.nict.jp(23),
JP | clock.nc.fukuoka-u.ac.jp(24),
KR | ntp.xbsd.kr(25),
MX | cronos.cenam.mx(26),
NL | ntp0.nl.uu.net(27),
NL | ntp1.nl.uu.net(28),
NL | ntp.remco.org(29),
NL | ntp0.nl.net(30),
PL | vega.cbk.poznan.pl(31),
PL | ntp.ntp-servers.com(32),
RO | ntp3.usv.ro(33),
RO | ntp2.usv.ro(34),
RU | ntp1.vniiftri.ru; ntp1.imvp.ru(35),
RU | ntp2.vniiftri.ru; ntp2.imvp.ru(36),
SE | ntp1.mmo.netnod.se(37),
SE | ntp1.sth.netnod.se(38),
SE | ntp2.mmo.netnod.se(39),
SE | ntp2.sth.netnod.se(40),
SE | time2.stupi.se(41),
SE | ntp1.sp.se(42),
SE | timehost.lysator.liu.se(43),
SI | ntp.mostovna.com(44),
US CA | timekeeper.isi.edu(45),
US CA | clock.sjc.he.net(46),
US CA | nist1.symmetricom.com(47),
US CA | clock.via.net(48),
US CA | nist1.aol-ca.truetime.com(49),
US CA | clock.isc.org(50),
US CA | clepsydra.dec.com(51),
US CA | gps.layer42.net(52),
US CA | time.no-such-agency.net(53),
US CA | nist1-sj.WiTime.net(54),
US CA | clock.fmt.he.net(55),
US CO | time-b.timefreq.bldrdoc.gov(56),
US CO | time-a.timefreq.bldrdoc.gov(57),
US CO | utcnist.colorado.edu(58),
US CO | time-c.timefreq.bldrdoc.gov(59),
US DE | rackety.udel.edu(60),
US DE | mizbeaver.udel.edu(61),
US GA | nist1.columbiacountyga.gov(62),
US IL | ntp.your.org(63),
US MA | bonehed.lcs.mit.edu(64),
US MA | time.keneli.org(65),
US MA | ntp0.broad.mit.edu(66),
US MD | time-a.nist.gov(67),
US MD | time-b.nist.gov(68),
US MI | nist.netservicesgroup.com(69),
US NY | nist1-ny.WiTime.net(70),
US NY | clock.nyc.he.net(71),
US UT | time.xmission.com(72),
US VA | nist1-dc.WiTime.net(73),
US VA | nist1.aol-va.truetime.com(74),
US WA | time-nw.nist.gov(75),
FR | utp.univ-lyon1.fr(76),
FR | ntp-sop.inria.fr(77),
FR | ntp.tuxfamily.net(78),
UK | bear.zoo.bt.co.uk(79) | |||||||||||||
| SpreferServerIPenable | 1.3.6.1.4.1.21317.1.3.2.2.3.4.8.3.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable or disable prefer custom server IP.
| |||||||||||||
| SpreferNTPIp | 1.3.6.1.4.1.21317.1.3.2.2.3.4.8.3.4 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Display or set prefer NTP server IP. | |||||||||||||
| SalternateNtpEnabled | 1.3.6.1.4.1.21317.1.3.2.2.3.4.8.3.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Display or set date time using alternate NTP server.
| |||||||||||||
| SalternateNtp | 1.3.6.1.4.1.21317.1.3.2.2.3.4.8.3.6 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Display or set alternative NTP server.
AU | ntp1.cs.mu.OZ.AU(0),
AU | ntp0.cs.mu.OZ.AU(1),
BE | ntp2.oma.be(2),
BE | ntp1.oma.be(3),
BR | ntps1.pads.ufrj.br(4),
CH | swisstime.ethz.ch(5),
CL | ntp.shoa.cl(6),
CZ | ntp.nic.cz(7),
DE | ntp.stairweb.de(8),
DE | ntps1-0.cs.tu-berlin.de(9),
DE | ptbtime1.ptb.de(10),
DE | ntp1.fau.de(11),
DE | ptbtime2.ptb.de(12),
DE | time1.one4vision.de(13),
DE | rustime01.rus.uni-stuttgart.de(14),
DE | ntp.probe-networks.de(15),
DE | ntp2.fau.de(16),
ES | hora.roa.es(17),
HK | stdtime.gov.hk(18),
IE | ntp-galway.hea.net(19),
IT | ntp1.inrim.it(20),
IT | ntp2.inrim.it(21),
JP | clock.tl.fukuoka-u.ac.jp(22),
JP | ntp.nict.jp(23),
JP | clock.nc.fukuoka-u.ac.jp(24),
KR | ntp.xbsd.kr(25),
MX | cronos.cenam.mx(26),
NL | ntp0.nl.uu.net(27),
NL | ntp1.nl.uu.net(28),
NL | ntp.remco.org(29),
NL | ntp0.nl.net(30),
PL | vega.cbk.poznan.pl(31),
PL | ntp.ntp-servers.com(32),
RO | ntp3.usv.ro(33),
RO | ntp2.usv.ro(34),
RU | ntp1.vniiftri.ru; ntp1.imvp.ru(35),
RU | ntp2.vniiftri.ru; ntp2.imvp.ru(36),
SE | ntp1.mmo.netnod.se(37),
SE | ntp1.sth.netnod.se(38),
SE | ntp2.mmo.netnod.se(39),
SE | ntp2.sth.netnod.se(40),
SE | time2.stupi.se(41),
SE | ntp1.sp.se(42),
SE | timehost.lysator.liu.se(43),
SI | ntp.mostovna.com(44),
US CA | timekeeper.isi.edu(45),
US CA | clock.sjc.he.net(46),
US CA | nist1.symmetricom.com(47),
US CA | clock.via.net(48),
US CA | nist1.aol-ca.truetime.com(49),
US CA | clock.isc.org(50),
US CA | clepsydra.dec.com(51),
US CA | gps.layer42.net(52),
US CA | time.no-such-agency.net(53),
US CA | nist1-sj.WiTime.net(54),
US CA | clock.fmt.he.net(55),
US CO | time-b.timefreq.bldrdoc.gov(56),
US CO | time-a.timefreq.bldrdoc.gov(57),
US CO | utcnist.colorado.edu(58),
US CO | time-c.timefreq.bldrdoc.gov(59),
US DE | rackety.udel.edu(60),
US DE | mizbeaver.udel.edu(61),
US GA | nist1.columbiacountyga.gov(62),
US IL | ntp.your.org(63),
US MA | bonehed.lcs.mit.edu(64),
US MA | time.keneli.org(65),
US MA | ntp0.broad.mit.edu(66),
US MD | time-a.nist.gov(67),
US MD | time-b.nist.gov(68),
US MI | nist.netservicesgroup.com(69),
US NY | nist1-ny.WiTime.net(70),
US NY | clock.nyc.he.net(71),
US UT | time.xmission.com(72),
US VA | nist1-dc.WiTime.net(73),
US VA | nist1.aol-va.truetime.com(74),
US WA | time-nw.nist.gov(75),
FR | utp.univ-lyon1.fr(76),
FR | ntp-sop.inria.fr(77),
FR | ntp.tuxfamily.net(78),
UK | bear.zoo.bt.co.uk(79) | |||||||||||||
| SalternateServerIPenable | 1.3.6.1.4.1.21317.1.3.2.2.3.4.8.3.7 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enable or disable alternate custom server IP.
| |||||||||||||
| SalternateNtpIp | 1.3.6.1.4.1.21317.1.3.2.2.3.4.8.3.8 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Display or set alternative NTP server IP. | |||||||||||||
| SadjustTimeEveryDays | 1.3.6.1.4.1.21317.1.3.2.2.3.4.8.3.9 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Display or set frequency of adjustment in days. | |||||||||||||
| Ndevicesecurity | 1.3.6.1.4.1.21317.1.3.2.2.3.5 | ||||||||||||
| NloginFailures | 1.3.6.1.4.1.21317.1.3.2.2.3.5.1 | ||||||||||||
| SloginAllowTimes | 1.3.6.1.4.1.21317.1.3.2.2.3.5.1.1 | INTEGER (1..99) | RW | ||||||||||
scalar · INTEGER (1..99) · read-write · current Display or set time of login faliure. | |||||||||||||
| SloginTimeOut | 1.3.6.1.4.1.21317.1.3.2.2.3.5.1.2 | INTEGER (1..240) | RW | ||||||||||
scalar · INTEGER (1..240) · read-write · current Display or set login time out. | |||||||||||||
| NworkingMode | 1.3.6.1.4.1.21317.1.3.2.2.3.5.2 | ||||||||||||
| SicmpEnabled | 1.3.6.1.4.1.21317.1.3.2.2.3.5.2.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Display or set status of ICMP.
| |||||||||||||
| NaccountPolicy | 1.3.6.1.4.1.21317.1.3.2.2.3.5.3 | ||||||||||||
| SminUserNameLen | 1.3.6.1.4.1.21317.1.3.2.2.3.5.3.1 | INTEGER (1..16) | RW | ||||||||||
scalar · INTEGER (1..16) · read-write · current Display or set minimum length of user name. | |||||||||||||
| SminUserPwdLen | 1.3.6.1.4.1.21317.1.3.2.2.3.5.3.2 | INTEGER (1..16) | RW | ||||||||||
scalar · INTEGER (1..16) · read-write · current Display or set minimum length of user password. | |||||||||||||
| SupperCaseEnabled | 1.3.6.1.4.1.21317.1.3.2.2.3.5.3.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Display or set one upper case rule in user password.
| |||||||||||||
| SlowerCaseEnabled | 1.3.6.1.4.1.21317.1.3.2.2.3.5.3.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Display or set one lower case rule in user password.
| |||||||||||||
| SnumberEnabled | 1.3.6.1.4.1.21317.1.3.2.2.3.5.3.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Display or set one number rule in user password.
| |||||||||||||
| SdisableDuplicateLogin | 1.3.6.1.4.1.21317.1.3.2.2.3.5.3.6 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Display or set status of disabled duplicate login rule.
| |||||||||||||
| NloginRestriction | 1.3.6.1.4.1.21317.1.3.2.2.3.5.4 | ||||||||||||
| SloginString | 1.3.6.1.4.1.21317.1.3.2.2.3.5.4.1 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Display or set a login string. string length: 0~32 NOTE: Input string as /empty to set this object to NULL. | |||||||||||||
| NipFilter | 1.3.6.1.4.1.21317.1.3.2.2.3.5.4.2 | ||||||||||||
| SipFilterEnabled | 1.3.6.1.4.1.21317.1.3.2.2.3.5.4.2.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Display or set status of ip filter.
| |||||||||||||
| SipFilterRule | 1.3.6.1.4.1.21317.1.3.2.2.3.5.4.2.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Display or set status of ip filter rule.
| |||||||||||||
| TipFilterTable | 1.3.6.1.4.1.21317.1.3.2.2.3.5.4.2.3 | NA | |||||||||||
table · not-accessible · current A list of restricted ip. | |||||||||||||
| RipFilterEntry | 1.3.6.1.4.1.21317.1.3.2.2.3.5.4.2.3.1 | NA | |||||||||||
row · not-accessible · current Status and parameter values for a PE's restricted IP.
| |||||||||||||
| CipFilterIndex | 1.3.6.1.4.1.21317.1.3.2.2.3.5.4.2.3.1.1 | INTEGER (1..5) | RO | ||||||||||
column · INTEGER (1..5) · read-only · current The value of index for the ip filter. | |||||||||||||
| CipFilterFrom | 1.3.6.1.4.1.21317.1.3.2.2.3.5.4.2.3.1.2 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current A set of restricted ip. ex. 192.168.0.1 Note: Users must follow in order to set the ip address. Note: To clear the settings to set the ip 0.0.0.0 | |||||||||||||
| CipFilterTo | 1.3.6.1.4.1.21317.1.3.2.2.3.5.4.2.3.1.3 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current A set of restricted ip. ex. 192.168.0.255 Note: Users must follow in order to set the ip address. Note: To clear the settings to set the ip 0.0.0.0 | |||||||||||||
| NmacFilter | 1.3.6.1.4.1.21317.1.3.2.2.3.5.4.3 | ||||||||||||
| SmacFilterEnabled | 1.3.6.1.4.1.21317.1.3.2.2.3.5.4.3.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Display or set status of mac filter.
| |||||||||||||
| SmacFilterRule | 1.3.6.1.4.1.21317.1.3.2.2.3.5.4.3.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Display or set status of mac filter rule.
| |||||||||||||
| TmacFilterTable | 1.3.6.1.4.1.21317.1.3.2.2.3.5.4.3.3 | NA | |||||||||||
table · not-accessible · current A list of restricted mac. | |||||||||||||
| RmacFilterEntry | 1.3.6.1.4.1.21317.1.3.2.2.3.5.4.3.3.1 | NA | |||||||||||
row · not-accessible · current Status and parameter values for a PE's restricted MAC.
| |||||||||||||
| CmacFilterIndex | 1.3.6.1.4.1.21317.1.3.2.2.3.5.4.3.3.1.1 | INTEGER (1..5) | RO | ||||||||||
column · INTEGER (1..5) · read-only · current The value of index for the mac filter. | |||||||||||||
| CmacFilterSet | 1.3.6.1.4.1.21317.1.3.2.2.3.5.4.3.3.1.2 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current A set of restricted mac. string length: 12 ex. 004854655511 Note: Users must follow in order to set the MAC address. Note: To clear the settings to set the MAC 000000000000 | |||||||||||||
| Nauthentication | 1.3.6.1.4.1.21317.1.3.2.2.3.5.5 | ||||||||||||
| Nradius | 1.3.6.1.4.1.21317.1.3.2.2.3.5.5.1 | ||||||||||||
| SradiusEnabled | 1.3.6.1.4.1.21317.1.3.2.2.3.5.5.1.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Display or set status of RADIUS server.
| |||||||||||||
| SpreferRadiusIp | 1.3.6.1.4.1.21317.1.3.2.2.3.5.5.1.2 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Display or set prefer RADIUS server IP. | |||||||||||||
| SpreferRadiusPort | 1.3.6.1.4.1.21317.1.3.2.2.3.5.5.1.3 | INTEGER (1..65535) | RW | ||||||||||
scalar · INTEGER (1..65535) · read-write · current Display or set prefer RADIUS server port. | |||||||||||||
| SalternateRadiusIp | 1.3.6.1.4.1.21317.1.3.2.2.3.5.5.1.4 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Display or set alternative RADIUS server IP. | |||||||||||||
| SalternateRadiusPort | 1.3.6.1.4.1.21317.1.3.2.2.3.5.5.1.5 | INTEGER (1..65535) | RW | ||||||||||
scalar · INTEGER (1..65535) · read-write · current Display or set alternative RADIUS server port. | |||||||||||||
| SradiusTimeOut | 1.3.6.1.4.1.21317.1.3.2.2.3.5.5.1.6 | INTEGER (1..60) | RW | ||||||||||
scalar · INTEGER (1..60) · read-write · current Display or set time out of authentication using RADIUS server. The unit is sec. | |||||||||||||
| SradiusRetry | 1.3.6.1.4.1.21317.1.3.2.2.3.5.5.1.7 | INTEGER (0..10) | RW | ||||||||||
scalar · INTEGER (0..10) · read-write · current Display or set retry times of authentication using RADIUS server. | |||||||||||||
| SradiusSecret | 1.3.6.1.4.1.21317.1.3.2.2.3.5.5.1.8 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Display or set shared secret of RADIUS server. string length: 6~15 At least 6 characters. NOTE: Input string as /empty to set this object to NULL. | |||||||||||||
| !customTrapMSG | 1.3.6.1.4.1.21317.1.3.2.2.5 | ||||||||||||
notification · current Display custom trap message. | |||||||||||||
| SrebootDevice | 1.3.6.1.4.1.21317.1.3.2.2.6 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Reboot PE Device
| |||||||||||||
Traps / Notifications
- configurationNotifyTrapMSG
1.3.6.1.4.1.21317.1.3.2.2.3.4.7.9.2 - customTrapMSG
1.3.6.1.4.1.21317.1.3.2.2.5