ARUBAWIRED-VSX-MIB
Hewlett Packard EnterpriseThis is the MIB module related to HPE Aruba VSX feature
snmptranslate -m ARUBAWIRED-VSX-MIB -Tpsnmpwalk -v2c -c <community> -m ARUBAWIRED-VSX-MIB <host> 1.3.6.1.4.1.47196.4.1.1.3.7Imports
| ARUBAWIRED-NETWORKING-OID | wndFeatures |
|---|---|
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IarubaWiredVsxMIB | 1.3.6.1.4.1.47196.4.1.1.3.7 | ||||||||||||
identity This is the MIB module related to HPE Aruba VSX feature | |||||||||||||
| NarubaWiredVsxConfig | 1.3.6.1.4.1.47196.4.1.1.3.7.1 | ||||||||||||
| NarubaWiredVsxIslConfig | 1.3.6.1.4.1.47196.4.1.1.3.7.1.1 | ||||||||||||
| SarubaWiredVsxIslPort | 1.3.6.1.4.1.47196.4.1.1.3.7.1.1.1 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Interface name corresponding to the VSX InterSwitchLink port. A value of 0 means there is no ISL port configuration. | |||||||||||||
| SarubaWiredVsxIslHelloInterval | 1.3.6.1.4.1.47196.4.1.1.3.7.1.1.2 | Integer32 (1..5) | RW | ||||||||||
scalar · Integer32 (1..5) · read-write · current ISLP hello interval in seconds. The default value is 1. | |||||||||||||
| SarubaWiredVsxIslHoldTime | 1.3.6.1.4.1.47196.4.1.1.3.7.1.1.3 | Integer32 (0..3) | RW | ||||||||||
scalar · Integer32 (0..3) · read-write · current ISL port-flap hold time in seconds. The default value is 0. | |||||||||||||
| SarubaWiredVsxIslHelloTimeout | 1.3.6.1.4.1.47196.4.1.1.3.7.1.1.4 | Integer32 (3..20) | RW | ||||||||||
scalar · Integer32 (3..20) · read-write · current ISL hello timeout in seconds. The default value is 3. | |||||||||||||
| SarubaWiredVsxIslSystemID | 1.3.6.1.4.1.47196.4.1.1.3.7.1.1.5 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Device identifier. This is advertised over ISL. | |||||||||||||
| SarubaWiredVsxIslPlatformName | 1.3.6.1.4.1.47196.4.1.1.3.7.1.1.6 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Device type. This is advertised over ISL. | |||||||||||||
| SarubaWiredVsxIslSwVersion | 1.3.6.1.4.1.47196.4.1.1.3.7.1.1.7 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current S/W version running on the device type. This is advertised over ISL. | |||||||||||||
| SarubaWiredVsxIslVIDList | 1.3.6.1.4.1.47196.4.1.1.3.7.1.1.8 | VidList | RO | ||||||||||
scalar · VidList · read-only · current VLAN IDs that the ISL port is a member of. | |||||||||||||
| NarubaWiredVsxKeepAliveConfig | 1.3.6.1.4.1.47196.4.1.1.3.7.1.2 | ||||||||||||
| SarubaWiredVsxKeepAliveSrcIPAddrType | 1.3.6.1.4.1.47196.4.1.1.3.7.1.2.1 | InetAddressType | RW | ||||||||||
scalar · InetAddressType · read-write · current The KeepAlive source address type. It can be IPv4 or IPv6. | |||||||||||||
| SarubaWiredVsxKeepAliveSrcIPAddr | 1.3.6.1.4.1.47196.4.1.1.3.7.1.2.2 | InetAddress | RW | ||||||||||
scalar · InetAddress · read-write · current The KeepAlive source address. It can be IPv4 or IPv6. | |||||||||||||
| SarubaWiredVsxKeepAliveVrf | 1.3.6.1.4.1.47196.4.1.1.3.7.1.2.3 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current The KeepAlive VRF domain. | |||||||||||||
| SarubaWiredVsxKeepAliveUdpPort | 1.3.6.1.4.1.47196.4.1.1.3.7.1.2.4 | Integer32 (1024..65535) | RW | ||||||||||
scalar · Integer32 (1024..65535) · read-write · current The KeepAlive UDP port. Same port is used as source and destination UDP ports. | |||||||||||||
| SarubaWiredVsxKeepAlivePeerIPAddrType | 1.3.6.1.4.1.47196.4.1.1.3.7.1.2.5 | InetAddressType | RW | ||||||||||
scalar · InetAddressType · read-write · current The KeepAlive peer address type. It can be IPv4 or IPv6. | |||||||||||||
| SarubaWiredVsxKeepAlivePeerIPAddr | 1.3.6.1.4.1.47196.4.1.1.3.7.1.2.6 | InetAddress | RW | ||||||||||
scalar · InetAddress · read-write · current The KeepAlive peer address. It can be IPv4 or IPv6. | |||||||||||||
| SarubaWiredVsxKeepAliveHelloInterval | 1.3.6.1.4.1.47196.4.1.1.3.7.1.2.7 | Integer32 (1..5) | RW | ||||||||||
scalar · Integer32 (1..5) · read-write · current KeepAlive hello interval in seconds. The default value is 1. | |||||||||||||
| SarubaWiredVsxKeepAliveHelloTimeout | 1.3.6.1.4.1.47196.4.1.1.3.7.1.2.8 | Integer32 (3..20) | RW | ||||||||||
scalar · Integer32 (3..20) · read-write · current KeepAlive hello timeout in seconds. The default value is 3. | |||||||||||||
| SarubaWiredVsxKeepAliveSystemID | 1.3.6.1.4.1.47196.4.1.1.3.7.1.2.9 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Device identifier that will be advertised via KeepAlive protocol. | |||||||||||||
| SarubaWiredVsxKeepAlivePlatformName | 1.3.6.1.4.1.47196.4.1.1.3.7.1.2.10 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current Device type that will be advertised via KeepAlive protocol. | |||||||||||||
| SarubaWiredVsxKeepAliveSwVersion | 1.3.6.1.4.1.47196.4.1.1.3.7.1.2.11 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current S/W version that will be advertised via KeepAlive protocol. | |||||||||||||
| NarubaWiredVsxAggregatorConfig | 1.3.6.1.4.1.47196.4.1.1.3.7.1.3 | ||||||||||||
| TarubaWiredVsxAggregatorTable | 1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1 | NA | |||||||||||
table · not-accessible · current This table supplements the table 'dot3adAggTable' in ieee802.3ad mib. | |||||||||||||
| RarubaWiredVsxAggregatorEntry | 1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1 | NA | |||||||||||
row · not-accessible · current The fields in this entry will be used to supplement fields of dot3adAggEntry in ieee802.3ad mib. | |||||||||||||
| CarubaWiredVsxAggregatorIndex | 1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.1 | InterfaceIndex | NA | ||||||||||
column · InterfaceIndex · not-accessible · current The unique identifier allocated to this Aggregator by the local System. This attribute identifies an Aggregator instance among the subordinate managed objects of the containing object. This value is read-only. | |||||||||||||
| CarubaWiredVsxAggregatorType | 1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.2 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current This field specifies the aggregator/lag type.
| |||||||||||||
| CarubaWiredVsxVlanList | 1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.3 | VidList | RO | ||||||||||
column · VidList · read-only · current VLANs that this aggregator is a member of. This is used for configuration consistency validation. | |||||||||||||
| CarubaWiredVsxLoopProtectEnabled | 1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.4 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current Loop Protect protocol admin state for this VSX. This is used for configuration consistency validation. | |||||||||||||
| CarubaWiredVsxLoadBalanceScheme | 1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Load balance scheme configured for this VSX. This is used for configuration consistency validation.
| |||||||||||||
| CarubaWiredVsxCosOverride | 1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.6 | INTEGER (0..7) | RO | ||||||||||
column · INTEGER (0..7) · read-only · current CoS override configuration for this VSX. This is used for configuration consistency validation. | |||||||||||||
| CarubaWiredVsxDscpOverride | 1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.7 | INTEGER (0..63) | RO | ||||||||||
column · INTEGER (0..63) · read-only · current DSCP override configuration for this VSX. This is used for configuration consistency validation. | |||||||||||||
| CarubaWiredVsxQoSTrust | 1.3.6.1.4.1.47196.4.1.1.3.7.1.3.1.1.8 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Port QoS trust mode configured for this VSX. This is used for configuration consistency validation.
| |||||||||||||
| NarubaWiredVsxGlobalConfiguration | 1.3.6.1.4.1.47196.4.1.1.3.7.1.4 | ||||||||||||
| SarubaWiredVsxDeviceRole | 1.3.6.1.4.1.47196.4.1.1.3.7.1.4.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current VSX device role.
| |||||||||||||
| SarubaWiredVsxConfigSync | 1.3.6.1.4.1.47196.4.1.1.3.7.1.4.2 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current VSX config sync.
| |||||||||||||
| NarubaWiredVsxStatus | 1.3.6.1.4.1.47196.4.1.1.3.7.2 | ||||||||||||
| NarubaWiredVsxIslStatus | 1.3.6.1.4.1.47196.4.1.1.3.7.2.1 | ||||||||||||
| SarubaWiredVsxIslOperState | 1.3.6.1.4.1.47196.4.1.1.3.7.2.1.1 | INTEGER | RO | inSync(3) | |||||||||
scalar · INTEGER · read-only · current ISL operational state.
Example values from LibreNMS test devices
| |||||||||||||
| SarubaWiredVsxIslPduTx | 1.3.6.1.4.1.47196.4.1.1.3.7.2.1.2 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Number of ISL PDUs transmitted by this device. | |||||||||||||
| SarubaWiredVsxIslPduRx | 1.3.6.1.4.1.47196.4.1.1.3.7.2.1.3 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Number of ISL PDUs received by this device. | |||||||||||||
| SarubaWiredVsxIslHelloTx | 1.3.6.1.4.1.47196.4.1.1.3.7.2.1.4 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Number of ISL Hello packets transmitted by this device. | |||||||||||||
| SarubaWiredVsxIslHelloRx | 1.3.6.1.4.1.47196.4.1.1.3.7.2.1.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Number of ISL Hello packets received by this device. | |||||||||||||
| SarubaWiredVsxDeviceOperSystemID | 1.3.6.1.4.1.47196.4.1.1.3.7.2.1.6 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current System identifier used by this device - derived from system identifier values of the 2 devices. | |||||||||||||
| NarubaWiredVsxKeepAliveStatus | 1.3.6.1.4.1.47196.4.1.1.3.7.2.2 | ||||||||||||
| SarubaWiredVsxKeepAliveOperState | 1.3.6.1.4.1.47196.4.1.1.3.7.2.2.1 | INTEGER | RO | inSyncEstablished(3) | |||||||||
scalar · INTEGER · read-only · current KeepAlive protocol operational state.
Example values from LibreNMS test devices
| |||||||||||||
| SarubaWiredVsxKeepAlivePacketsTx | 1.3.6.1.4.1.47196.4.1.1.3.7.2.2.2 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Number of KeepAlive protocol packets transmitted by this device. | |||||||||||||
| SarubaWiredVsxKeepAlivePacketsRx | 1.3.6.1.4.1.47196.4.1.1.3.7.2.2.3 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Number of KeepAlive protocol packets received by this device. | |||||||||||||
| SarubaWiredVsxKeepAlivePacketsDrop | 1.3.6.1.4.1.47196.4.1.1.3.7.2.2.4 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Number of KeepAlive protocol packets dropped. | |||||||||||||
| SarubaWiredVsxKeepAliveTimeoutCount | 1.3.6.1.4.1.47196.4.1.1.3.7.2.2.5 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Number of times KeepAlive protocol went to failed state because of KeepAlive timer expiry. | |||||||||||||
| SarubaWiredVsxKeepAliveLastEstablishedTime | 1.3.6.1.4.1.47196.4.1.1.3.7.2.2.6 | TimeTicks | RO | ||||||||||
scalar · TimeTicks · read-only · current Stores the most recent time KeepAlive handshake was successful and a value of 0 indicates KeepAlive handshake was never established. | |||||||||||||
| SarubaWiredVsxKeepAliveLastFailedTime | 1.3.6.1.4.1.47196.4.1.1.3.7.2.2.7 | TimeTicks | RO | ||||||||||
scalar · TimeTicks · read-only · current Stores the most recent time KeepAlive handshake failed and a value of 0 indicates KeepAlive handshake never failed. | |||||||||||||
| NarubaWiredVsxNotifications | 1.3.6.1.4.1.47196.4.1.1.3.7.3 | ||||||||||||
| NarubaWiredVsxTraps | 1.3.6.1.4.1.47196.4.1.1.3.7.3.1 | ||||||||||||
| !islUp | 1.3.6.1.4.1.47196.4.1.1.3.7.3.1.1 | ||||||||||||
notification · current An islUp trap signifies that ISL transitioned to inSync state | |||||||||||||
| !islDown | 1.3.6.1.4.1.47196.4.1.1.3.7.3.1.2 | ||||||||||||
notification · current An islDown trap signifies that ISL transitioned to outOfSync state | |||||||||||||
| !keepAliveUp | 1.3.6.1.4.1.47196.4.1.1.3.7.3.1.3 | ||||||||||||
notification · current A keepAliveUp trap signifies that KA is in established state | |||||||||||||
| !keepAliveDown | 1.3.6.1.4.1.47196.4.1.1.3.7.3.1.4 | ||||||||||||
notification · current A keepAliveDown trap signifies that KA is in failed state | |||||||||||||
| !mclagLocalUpPeerUp | 1.3.6.1.4.1.47196.4.1.1.3.7.3.1.5 | ||||||||||||
notification · current A mclagLocalUpPeerUp trap signifies that the McLAG is up in both the primary and secondary VSX devices.
| |||||||||||||
| !mclagLocalUpPeerDown | 1.3.6.1.4.1.47196.4.1.1.3.7.3.1.6 | ||||||||||||
notification · current A mclagLocalUpPeerDown trap signifies that the McLAG is up in the local device but down in the peer VSX device.
| |||||||||||||
| !mclagLocalDownPeerUp | 1.3.6.1.4.1.47196.4.1.1.3.7.3.1.7 | ||||||||||||
notification · current A mclagLocalDownPeerUp trap signifies that the McLAG is down in the local device but up in the peer VSX device.
| |||||||||||||
| !mclagLocalDownPeerDown | 1.3.6.1.4.1.47196.4.1.1.3.7.3.1.8 | ||||||||||||
notification · current A mclagLocalDownPeerDown trap signifies that the McLAG is down in both the primary and secondary VSX devices.
| |||||||||||||
Textual conventions
VidListOCTET STRING (SIZE (512))Display hint:
512xEach octet within this value specifies a set of eight VLAN index (VID), with the first octet specifying VIDs 1 through 8, the second octet specifying VIDs 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered VID, and the least significant bit represents the highest numbered VID. Thus, each VID is represented by a single bit within the value of this object. If that bit has a value of 1 then that VID is included in the set of VIDs; the VID is not included if its bit has a value of 0. This list represents the entire range of VLAN index values defined in the scope of IEEE 802.1Q.
Traps / Notifications
- islDown
1.3.6.1.4.1.47196.4.1.1.3.7.3.1.2 - islUp
1.3.6.1.4.1.47196.4.1.1.3.7.3.1.1 - keepAliveDown
1.3.6.1.4.1.47196.4.1.1.3.7.3.1.4 - keepAliveUp
1.3.6.1.4.1.47196.4.1.1.3.7.3.1.3 - mclagLocalDownPeerDown
1.3.6.1.4.1.47196.4.1.1.3.7.3.1.8 - mclagLocalDownPeerUp
1.3.6.1.4.1.47196.4.1.1.3.7.3.1.7 - mclagLocalUpPeerDown
1.3.6.1.4.1.47196.4.1.1.3.7.3.1.6 - mclagLocalUpPeerUp
1.3.6.1.4.1.47196.4.1.1.3.7.3.1.5