ARUBAWIRED-PROVIDER-BRIDGE-MIB
Hewlett Packard EnterpriseThis MIB module contains the HPE 'version' of the standard Provider Bridge MIB and the proprietary extensions to it.
snmptranslate -m ARUBAWIRED-PROVIDER-BRIDGE-MIB -Tpsnmpwalk -v2c -c <community> -m ARUBAWIRED-PROVIDER-BRIDGE-MIB <host> 1.3.6.1.4.1.47196.4.1.1.3.23Imports
| ARUBAWIRED-NETWORKING-OID | wndFeatures |
|---|---|
| IF-MIB | InterfaceIndex |
| Q-BRIDGE-MIB | VlanId |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IarubaWiredProviderBridgeMIB | 1.3.6.1.4.1.47196.4.1.1.3.23 | |||
identity This MIB module contains the HPE 'version' of the standard Provider Bridge MIB and the proprietary extensions to it. | ||||
| NarubaWiredProviderBridgeNotifications | 1.3.6.1.4.1.47196.4.1.1.3.23.0 | |||
| NarubaWiredProviderBridgeObjects | 1.3.6.1.4.1.47196.4.1.1.3.23.1 | |||
| NarubaWiredProviderBridgeBase | 1.3.6.1.4.1.47196.4.1.1.3.23.1.0 | |||
| SarubaWiredProviderBridgeType | 1.3.6.1.4.1.47196.4.1.1.3.23.1.0.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current arubaWiredProviderBridgeType controls bridge mode configuration.
A device can function in one of the 4 modes defined above.
vlanBridge - provider bridge feature disabled mode,
all VLANs are cvlans.
svlanBridge - provider bridge mode with only svlans.
providerEdgeBridge - provider bridge mode with cvlans and
svlans and mappings between them.
vlanSvlanBridge - provider bridge mode with independent
cvlans and svlans on the same device.
Changing from one mode to another will empty out the
current configuration information and reboot the device.
| ||||
| SarubaWiredProviderBridgeEtherType | 1.3.6.1.4.1.47196.4.1.1.3.23.1.0.2 | Integer32 (1536..65535) | RO | |
scalar · Integer32 (1536..65535) · read-only · current Defines the 2-byte ethertype for provider tagged frames. The default is 0x88a8. Changing from one tag-type to another with a given arubaWiredProviderBridgeType configuration will save current configurations and reboot the device, the new tag-type will take effect subsequently. | ||||
| TarubaWiredProviderBridgeVlanTypeTable | 1.3.6.1.4.1.47196.4.1.1.3.23.1.0.3 | NA | ||
table · not-accessible · current HPE proprietary table to classify a VLAN as a cvlan or an svlan | ||||
| RarubaWiredProviderBridgeVlanTypeEntry | 1.3.6.1.4.1.47196.4.1.1.3.23.1.0.3.1 | NA | ||
row · not-accessible · current An entry for HPE Specific extension table | ||||
| CarubaWiredProviderBridgeVlanTypeVlanID | 1.3.6.1.4.1.47196.4.1.1.3.23.1.0.3.1.1 | VlanId | NA | |
column · VlanId · not-accessible · current The VLAN ID to which this entry belongs. | ||||
| CarubaWiredProviderBridgeVlanType | 1.3.6.1.4.1.47196.4.1.1.3.23.1.0.3.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current Indicates the VLANtype.
| ||||
| TarubaWiredProviderBridgePortTable | 1.3.6.1.4.1.47196.4.1.1.3.23.1.0.4 | NA | ||
table · not-accessible · current This specifies the designated type of an externally accessible port on a Provider Bridge. | ||||
| RarubaWiredProviderBridgePortEntry | 1.3.6.1.4.1.47196.4.1.1.3.23.1.0.4.1 | NA | ||
row · not-accessible · current An entry that specifies the designated type of an externally accessible port on a Provider Bridge. | ||||
| CarubaWiredProviderBridgePortifIndex | 1.3.6.1.4.1.47196.4.1.1.3.23.1.0.4.1.1 | InterfaceIndex | NA | |
column · InterfaceIndex · not-accessible · current The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex. | ||||
| CarubaWiredProviderBridgePortType | 1.3.6.1.4.1.47196.4.1.1.3.23.1.0.4.1.2 | INTEGER | RO | |
column · INTEGER · read-only · current The type of an externally accessible port on a Provider Bridge. A customer-edge port is a C-VLAN component Port on a Provider Edge Bridge that is connected to customer owned equipment and receives and transmits frames for a single customer. Designating a port as a Customer Edge Port implies Provider Edge Bridge functionality and, specifically, the existence of a C-VLAN component associated with that port. This C-VLAN component is uniquely identified within the Bridge by the port number of the associated Customer Edge Port. A customer-network port is an S-VLAN component Port on a Provider Bridge or within a Provider Edge Bridge that receives and transmits frame for a single customer. A provider-network port is an S-VLAN component Port on a Provider Bridge that can transmit and receive frames for multiple customers.
| ||||
| NarubaWiredProviderBridgeConformance | 1.3.6.1.4.1.47196.4.1.1.3.23.2 | |||
| NarubaWiredProviderBridgeCompliances | 1.3.6.1.4.1.47196.4.1.1.3.23.2.1 | |||
| MarubaWiredProviderBridgeCompliance | 1.3.6.1.4.1.47196.4.1.1.3.23.2.1.1 | |||
compliance · current The compliance statement for HPE Switches with IEEE standard Provider Bridge MIBs. | ||||
| NarubaWiredProviderBridgeGroups | 1.3.6.1.4.1.47196.4.1.1.3.23.2.2 | |||
| GarubaWiredProviderBridgeBaseGroup | 1.3.6.1.4.1.47196.4.1.1.3.23.2.2.1 | |||
group · current Basic Provider Bridge configuration information. | ||||