ARUBAWIRED-MCLAG-MIB
Hewlett Packard EnterpriseThis is the MIB module related to HPE Aruba MCLAG feature
snmptranslate -m ARUBAWIRED-MCLAG-MIB -Tpsnmpwalk -v2c -c <community> -m ARUBAWIRED-MCLAG-MIB <host> 1.3.6.1.4.1.47196.4.1.1.3.2Imports
| ARUBAWIRED-NETWORKING-OID | wndFeatures |
|---|---|
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IarubaWiredMclagMIB | 1.3.6.1.4.1.47196.4.1.1.3.2 | |||
identity This is the MIB module related to HPE Aruba MCLAG feature | ||||
| NarubaWiredMclagConfig | 1.3.6.1.4.1.47196.4.1.1.3.2.1 | |||
| NarubaWiredMclagIslConfig | 1.3.6.1.4.1.47196.4.1.1.3.2.1.1 | |||
| SarubaWiredMclagIslPort | 1.3.6.1.4.1.47196.4.1.1.3.2.1.1.1 | InterfaceIndex | RW | obsolete |
scalar · InterfaceIndex · read-write · obsolete IfIndex corresponding to the Mclag InterSwitchLink port. A value of 0 means there is no ISL port configuration. | ||||
| SarubaWiredMclagIslHelloInterval | 1.3.6.1.4.1.47196.4.1.1.3.2.1.1.2 | Integer32 (1..5) | RW | obsolete |
scalar · Integer32 (1..5) · read-write · obsolete ISLP hello interval in seconds. The default value is 1. | ||||
| SarubaWiredMclagIslHoldTime | 1.3.6.1.4.1.47196.4.1.1.3.2.1.1.3 | Integer32 (0..3) | RW | obsolete |
scalar · Integer32 (0..3) · read-write · obsolete ISL port-flap hold time in seconds. The default value is 0. | ||||
| SarubaWiredMclagIslHelloTimeout | 1.3.6.1.4.1.47196.4.1.1.3.2.1.1.4 | Integer32 (3..20) | RW | obsolete |
scalar · Integer32 (3..20) · read-write · obsolete ISL hello timeout in seconds. The default value is 3. | ||||
| SarubaWiredMclagIslDevicePriority | 1.3.6.1.4.1.47196.4.1.1.3.2.1.1.5 | Integer32 (1..16) | RW | obsolete |
scalar · Integer32 (1..16) · read-write · obsolete Mclags on device with lower value of priority will stay UP in the case of split. The default value is 8. | ||||
| SarubaWiredMclagIslSystemID | 1.3.6.1.4.1.47196.4.1.1.3.2.1.1.6 | DisplayString | RO | obsolete |
scalar · DisplayString · read-only · obsolete Device identifier. This is advertised over ISL. | ||||
| SarubaWiredMclagIslPlatformName | 1.3.6.1.4.1.47196.4.1.1.3.2.1.1.7 | DisplayString | RO | obsolete |
scalar · DisplayString · read-only · obsolete Device type. This is advertised over ISL. | ||||
| SarubaWiredMclagIslSwVersion | 1.3.6.1.4.1.47196.4.1.1.3.2.1.1.8 | DisplayString | RO | obsolete |
scalar · DisplayString · read-only · obsolete S/W version running on the device type. This is advertised over ISL. | ||||
| SarubaWiredMclagIslVIDList | 1.3.6.1.4.1.47196.4.1.1.3.2.1.1.9 | VidList | RO | obsolete |
scalar · VidList · read-only · obsolete VLAN IDs that the ISL port is a member of. | ||||
| NarubaWiredMclagKeepAliveConfig | 1.3.6.1.4.1.47196.4.1.1.3.2.1.2 | |||
| SarubaWiredMclagKeepAliveSrcIPAddrType | 1.3.6.1.4.1.47196.4.1.1.3.2.1.2.1 | InetAddressType | RW | obsolete |
scalar · InetAddressType · read-write · obsolete The KeepAlive source address type. It can be IPv4 or IPv6. | ||||
| SarubaWiredMclagKeepAliveSrcIPAddr | 1.3.6.1.4.1.47196.4.1.1.3.2.1.2.2 | InetAddress | RW | obsolete |
scalar · InetAddress · read-write · obsolete The KeepAlive source address. It can be IPv4 or IPv6. | ||||
| SarubaWiredMclagKeepAliveVrf | 1.3.6.1.4.1.47196.4.1.1.3.2.1.2.3 | DisplayString | RW | obsolete |
scalar · DisplayString · read-write · obsolete The KeepAlive VRF domain. | ||||
| SarubaWiredMclagKeepAliveUdpPort | 1.3.6.1.4.1.47196.4.1.1.3.2.1.2.4 | Integer32 (1024..65535) | RW | obsolete |
scalar · Integer32 (1024..65535) · read-write · obsolete The KeepAlive UDP port. Same port is used as source and destination UDP ports. | ||||
| SarubaWiredMclagKeepAlivePeerIPAddrType | 1.3.6.1.4.1.47196.4.1.1.3.2.1.2.5 | InetAddressType | RW | obsolete |
scalar · InetAddressType · read-write · obsolete The KeepAlive peer address type. It can be IPv4 or IPv6. | ||||
| SarubaWiredMclagKeepAlivePeerIPAddr | 1.3.6.1.4.1.47196.4.1.1.3.2.1.2.6 | InetAddress | RW | obsolete |
scalar · InetAddress · read-write · obsolete The KeepAlive peer address. It can be IPv4 or IPv6. | ||||
| SarubaWiredMclagKeepAliveHelloInterval | 1.3.6.1.4.1.47196.4.1.1.3.2.1.2.7 | Integer32 (1..5) | RW | obsolete |
scalar · Integer32 (1..5) · read-write · obsolete KeepAlive hello interval in seconds. The default value is 1. | ||||
| SarubaWiredMclagKeepAliveHelloTimeout | 1.3.6.1.4.1.47196.4.1.1.3.2.1.2.8 | Integer32 (3..20) | RW | obsolete |
scalar · Integer32 (3..20) · read-write · obsolete KeepAlive hello timeout in seconds. The default value is 3. | ||||
| SarubaWiredMclagKeepAliveDevicePriority | 1.3.6.1.4.1.47196.4.1.1.3.2.1.2.9 | Integer32 (1..16) | RO | obsolete |
scalar · Integer32 (1..16) · read-only · obsolete Device priority that will be advertised via KeepAlive protocol. | ||||
| SarubaWiredMclagKeepAliveSystemID | 1.3.6.1.4.1.47196.4.1.1.3.2.1.2.10 | DisplayString | RO | obsolete |
scalar · DisplayString · read-only · obsolete Device identifier that will be advertised via KeepAlive protocol. | ||||
| SarubaWiredMclagKeepAlivePlatformName | 1.3.6.1.4.1.47196.4.1.1.3.2.1.2.11 | DisplayString | RO | obsolete |
scalar · DisplayString · read-only · obsolete Device type that will be advertised via KeepAlive protocol. | ||||
| SarubaWiredMclagKeepAliveSwVersion | 1.3.6.1.4.1.47196.4.1.1.3.2.1.2.12 | DisplayString | RO | obsolete |
scalar · DisplayString · read-only · obsolete S/W version that will be advertised via KeepAlive protocol. | ||||
| NarubaWiredMclagAggregatorConfig | 1.3.6.1.4.1.47196.4.1.1.3.2.1.3 | |||
| TarubaWiredMclagAggregatorTable | 1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1 | NA | obsolete | |
table · not-accessible · obsolete This table supplements the table 'dot3adAggTable' in ieee802.3ad mib. | ||||
| RarubaWiredMclagAggregatorEntry | 1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1.1 | NA | obsolete | |
row · not-accessible · obsolete The fields in this entry will be used to supplement fields of dot3adAggEntry in ieee802.3ad mib. | ||||
| CarubaWiredMclagAggregatorIndex | 1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1.1.1 | InterfaceIndex | NA | obsolete |
column · InterfaceIndex · not-accessible · obsolete The unique identifier allocated to this Aggregator by the local System. This attribute identifies an Aggregator instance among the subordinate managed objects of the containing object. This value is read-only. | ||||
| CarubaWiredMclagAggregatorType | 1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1.1.2 | INTEGER | RC | obsolete |
column · INTEGER · read-create · obsolete This field specifies the aggregator/lag type.
| ||||
| CarubaWiredMclagVlanList | 1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1.1.3 | VidList | RO | obsolete |
column · VidList · read-only · obsolete VLANs that this aggregator is a member of. This is used for configuration consistency validation. | ||||
| CarubaWiredMclagLoopProtectEnabled | 1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1.1.4 | TruthValue | RO | obsolete |
column · TruthValue · read-only · obsolete Loop Protect protocol admin state for this MCLAG. This is used for configuration consistency validation. | ||||
| CarubaWiredMclagLoadBalanceScheme | 1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1.1.5 | INTEGER | RO | obsolete |
column · INTEGER · read-only · obsolete Load balance scheme configured for this MCLAG. This is used for configuration consistency validation.
| ||||
| CarubaWiredMclagCosOverride | 1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1.1.6 | INTEGER (0..7) | RO | obsolete |
column · INTEGER (0..7) · read-only · obsolete CoS override configuration for this MCLAG. This is used for configuration consistency validation. | ||||
| CarubaWiredMclagDscpOverride | 1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1.1.7 | INTEGER (0..63) | RO | obsolete |
column · INTEGER (0..63) · read-only · obsolete DSCP override configuration for this MCLAG. This is used for configuration consistency validation. | ||||
| CarubaWiredMclagQoSTrust | 1.3.6.1.4.1.47196.4.1.1.3.2.1.3.1.1.8 | INTEGER | RO | obsolete |
column · INTEGER · read-only · obsolete Port QoS trust mode configured for this MCLAG. This is used for configuration consistency validation.
| ||||
| NarubaWiredMclagStatus | 1.3.6.1.4.1.47196.4.1.1.3.2.2 | |||
| NarubaWiredMclagIslStatus | 1.3.6.1.4.1.47196.4.1.1.3.2.2.1 | |||
| SarubaWiredMclagIslOperState | 1.3.6.1.4.1.47196.4.1.1.3.2.2.1.1 | INTEGER | RO | obsolete |
scalar · INTEGER · read-only · obsolete ISL operational state.
| ||||
| SarubaWiredMclagIslPduTx | 1.3.6.1.4.1.47196.4.1.1.3.2.2.1.2 | Integer32 | RO | obsolete |
scalar · Integer32 · read-only · obsolete Number of ISL PDUs transmitted by this device. | ||||
| SarubaWiredMclagIslPduRx | 1.3.6.1.4.1.47196.4.1.1.3.2.2.1.3 | Integer32 | RO | obsolete |
scalar · Integer32 · read-only · obsolete Number of ISL PDUs received by this device. | ||||
| SarubaWiredMclagIslHelloTx | 1.3.6.1.4.1.47196.4.1.1.3.2.2.1.4 | Integer32 | RO | obsolete |
scalar · Integer32 · read-only · obsolete Number of ISL Hello packets transmitted by this device. | ||||
| SarubaWiredMclagIslHelloRx | 1.3.6.1.4.1.47196.4.1.1.3.2.2.1.5 | Integer32 | RO | obsolete |
scalar · Integer32 · read-only · obsolete Number of ISL Hello packets received by this device. | ||||
| SarubaWiredMclagDeviceOperRole | 1.3.6.1.4.1.47196.4.1.1.3.2.2.1.6 | INTEGER | RO | obsolete |
scalar · INTEGER · read-only · obsolete Operational role of this device derived based on device priority of the 2 devices.
| ||||
| SarubaWiredMclagDeviceOperSystemID | 1.3.6.1.4.1.47196.4.1.1.3.2.2.1.7 | DisplayString | RO | obsolete |
scalar · DisplayString · read-only · obsolete System identifier used by this device - derived from system identifier values of the 2 devices. | ||||
| NarubaWiredMclagKeepAliveStatus | 1.3.6.1.4.1.47196.4.1.1.3.2.2.2 | |||
| SarubaWiredMclagKeepAliveOperState | 1.3.6.1.4.1.47196.4.1.1.3.2.2.2.1 | INTEGER | RO | obsolete |
scalar · INTEGER · read-only · obsolete KeepAlive protocol operational state.
| ||||
| SarubaWiredMclagKeepAlivePacketsTx | 1.3.6.1.4.1.47196.4.1.1.3.2.2.2.2 | Integer32 | RO | obsolete |
scalar · Integer32 · read-only · obsolete Number of KeepAlive protocol packets transmitted by this device. | ||||
| SarubaWiredMclagKeepAlivePacketsRx | 1.3.6.1.4.1.47196.4.1.1.3.2.2.2.3 | Integer32 | RO | obsolete |
scalar · Integer32 · read-only · obsolete Number of KeepAlive protocol packets received by this device. | ||||
| SarubaWiredMclagKeepAlivePacketsDrop | 1.3.6.1.4.1.47196.4.1.1.3.2.2.2.4 | Integer32 | RO | obsolete |
scalar · Integer32 · read-only · obsolete Number of KeepAlive protocol packets dropped. | ||||
| SarubaWiredMclagKeepAliveTimeoutCount | 1.3.6.1.4.1.47196.4.1.1.3.2.2.2.5 | Integer32 | RO | obsolete |
scalar · Integer32 · read-only · obsolete Number of times KeepAlive protocol went to failed state because of KeepAlive timer expiry. | ||||
| SarubaWiredMclagKeepAliveLastEstablishedTime | 1.3.6.1.4.1.47196.4.1.1.3.2.2.2.6 | TimeTicks | RO | obsolete |
scalar · TimeTicks · read-only · obsolete Stores the most recent time KeepAlive handshake was successful and a value of 0 indicates KeepAlive handshake was never established. | ||||
| SarubaWiredMclagKeepAliveLastFailedTime | 1.3.6.1.4.1.47196.4.1.1.3.2.2.2.7 | TimeTicks | RO | obsolete |
scalar · TimeTicks · read-only · obsolete Stores the most recent time KeepAlive handshake failed and a value of 0 indicates KeepAlive handshake never failed. | ||||
Textual conventions
VidListOCTET STRING (SIZE (512))Display hint:
512xEach octet within this value specifies a set of eight VlanIIndex (VID), with the first octet specifying VIDs 1 through 8, the second octet specifying VIDs 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered VID, and the least significant bit represents the highest numbered VID. Thus, each VID is represented by a single bit within the value of this object. If that bit has a value of 1 then that VID is included in the set of VIDs; the VID is not included if its bit has a value of 0. This list represents the entire range of VlanIndex values defined in the scope of IEEE 802.1Q.