ARRIS-D5-VIDEO-MIB
Arris Interactive LLCThis MIB manages the MPEG / VIDEO software on the Arris CMTS.
snmptranslate -m ARRIS-D5-VIDEO-MIB -Tpsnmpwalk -v2c -c <community> -m ARRIS-D5-VIDEO-MIB <host> 1.3.6.1.4.1.4115.1.8.1.1Imports
| ARRIS-MIB | arrisD5UEQam |
|---|---|
| IF-MIB | InterfaceIndex, InterfaceIndexOrZero, ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Id5MpegVideoMIB | 1.3.6.1.4.1.4115.1.8.1.1 | |||
identity This MIB manages the MPEG / VIDEO software on the Arris CMTS. | ||||
| Nd5VideoObjects | 1.3.6.1.4.1.4115.1.8.1.1.1 | |||
| Nd5VideoControlGroup | 1.3.6.1.4.1.4115.1.8.1.1.1.1 | |||
| Sd5vControlPatInterval | 1.3.6.1.4.1.4115.1.8.1.1.1.1.1 | Unsigned32 | RW | |
scalar · Unsigned32 · read-write · current Retransmission interval for PAT tables in milliseconds. | ||||
| Sd5vControlPmtInterval | 1.3.6.1.4.1.4115.1.8.1.1.1.1.2 | Unsigned32 | RW | |
scalar · Unsigned32 · read-write · current Retransmission interval for PMT tables in milliseconds. | ||||
| Sd5vControlNitInterval | 1.3.6.1.4.1.4115.1.8.1.1.1.1.3 | Unsigned32 | RW | |
scalar · Unsigned32 · read-write · current Retransmission interval for NIT tables in milliseconds. | ||||
| Sd5vControlSdtInterval | 1.3.6.1.4.1.4115.1.8.1.1.1.1.4 | Unsigned32 | RW | |
scalar · Unsigned32 · read-write · current Retransmission interval for SDT tables in milliseconds. | ||||
| Sd5vControlOriginalNetworkId | 1.3.6.1.4.1.4115.1.8.1.1.1.1.5 | Unsigned32 | RW | |
scalar · Unsigned32 · read-write · current DVB original-network-id to be used in downstream . | ||||
| Sd5vControlNetworkId | 1.3.6.1.4.1.4115.1.8.1.1.1.1.6 | Unsigned32 | RW | |
scalar · Unsigned32 · read-write · current DVB network-id to be used in downstream . | ||||
| Sd5vControlNetworkName | 1.3.6.1.4.1.4115.1.8.1.1.1.1.7 | DisplayString | RW | |
scalar · DisplayString · read-write · current DVB network-name to be used in downstream . | ||||
| Sd5vControlTimeoutInterval | 1.3.6.1.4.1.4115.1.8.1.1.1.1.8 | Unsigned32 | RW | |
scalar · Unsigned32 · read-write · current Timeout interval for incoming streams in milliseconds. | ||||
| Sd5vControlNitPID | 1.3.6.1.4.1.4115.1.8.1.1.1.1.9 | D5PID | RW | |
scalar · D5PID · read-write · current PID value to use when generating NIT tables. | ||||
| Sd5vControlAutoGeneratePAT | 1.3.6.1.4.1.4115.1.8.1.1.1.1.10 | D5GeneratePat | RW | |
scalar · D5GeneratePat · read-write · current Flag specifying whether or not the auto-generation by the D5 of PAT tables is enabled | ||||
| Sd5vControlAutoGenerateCAT | 1.3.6.1.4.1.4115.1.8.1.1.1.1.11 | TruthValue | RW | |
scalar · TruthValue · read-write · current Flag specifying whether or not the auto-generation by the D5 of CAT tables is enabled | ||||
| Sd5vControlAutoGeneratePMT | 1.3.6.1.4.1.4115.1.8.1.1.1.1.12 | TruthValue | RW | |
scalar · TruthValue · read-write · current Flag specifying whether or not the auto-generation by the D5 of PMT tables is enabled | ||||
| Sd5vControlAutoGenerateNIT | 1.3.6.1.4.1.4115.1.8.1.1.1.1.13 | TruthValue | RW | |
scalar · TruthValue · read-write · current Flag specifying whether or not the auto-generation by the D5 of NIT tables is enabled(and the associated entry in the PAT table for the NIT-PID) | ||||
| Sd5vControlAutoGenerateSDT | 1.3.6.1.4.1.4115.1.8.1.1.1.1.14 | TruthValue | RW | |
scalar · TruthValue · read-write · current Flag specifying whether or not the auto-generation by the D5 of SDT tables is enabled | ||||
| Sd5vControlAutoGenerateTDT | 1.3.6.1.4.1.4115.1.8.1.1.1.1.15 | TruthValue | RW | |
scalar · TruthValue · read-write · current Flag specifying whether or not the auto-generation by the D5 of TDT tables is enabled | ||||
| Sd5vControlAutoGenerateTOT | 1.3.6.1.4.1.4115.1.8.1.1.1.1.16 | TruthValue | RW | |
scalar · TruthValue · read-write · current Flag specifying whether or not the auto-generation by the D5 of TOT tables is enabled | ||||
| Sd5vControlPassThroughType | 1.3.6.1.4.1.4115.1.8.1.1.1.1.17 | INTEGER | RW | |
scalar · INTEGER · read-write · current This can be used to disable the default Arris prog/pid remapping scheme, and use pass-through remapping instead. Can also be used to enable MPTS-pass-through mode.
| ||||
| Sd5vControlCatInterval | 1.3.6.1.4.1.4115.1.8.1.1.1.1.18 | Unsigned32 | RW | |
scalar · Unsigned32 · read-write · current Retransmission interval for CAT tables in milliseconds. | ||||
| Sd5vControlMaxProgramsPerQamChannel | 1.3.6.1.4.1.4115.1.8.1.1.1.1.19 | Unsigned32 (0..63) | RW | |
scalar · Unsigned32 (0..63) · read-write · current Maximum number of programs allowed on a Qam channel at any one time.(Some QAM H/W may restrict to 31) | ||||
| Sd5vControlAllowEsDvbPids | 1.3.6.1.4.1.4115.1.8.1.1.1.1.20 | TruthValue | RW | |
scalar · TruthValue · read-write · current Flag that determines whether or not DVB-reserved PIDS are allowed to be used for elementary-streams. | ||||
| Sd5vControlDefaultMappingScheme | 1.3.6.1.4.1.4115.1.8.1.1.1.1.21 | D5VideoDefaultMappingScheme | RW | |
scalar · D5VideoDefaultMappingScheme · read-write · current The mapping scheme to be used for input transport-streams that have no associated static-configuration. | ||||
| Sd5vControlFastPsiTableUpdates | 1.3.6.1.4.1.4115.1.8.1.1.1.1.22 | TruthValue | RW | |
scalar · TruthValue · read-write · current If this is set to TRUE, then PSI table updates are sent down the RF as soon as the new PSI table has been calculated. Otherwise, PSI table updates are made in such a way that the repetition interval for that table on the RF remains constant. | ||||
| Sd5vControlCycleOutputPids | 1.3.6.1.4.1.4115.1.8.1.1.1.1.23 | TruthValue | RW | |
scalar · TruthValue · read-write · current If this is set to TRUE, then the D5 cycles through the pool of unused PIDs when creating new PID remappings. The purpose of this is to limit the amound of PID reusage E.g. if a set-top using a buffered PMT table to view a program where the program may have been deleted and the PIDs may be in use by a different program now. | ||||
| Sd5vControlOverSubscriptionSafetyMargin | 1.3.6.1.4.1.4115.1.8.1.1.1.1.24 | Unsigned32 | RW | |
scalar · Unsigned32 · read-write · current The amount of bandwidth in Kbps for the D5 to maintain as unused bandwidth on each QAM. Purpose of this being to help prevent over-subscription from occuring at the cost of some wasted bandwidth. | ||||
| Sd5vControlOverSubscriptionRecoveryEnabled | 1.3.6.1.4.1.4115.1.8.1.1.1.1.25 | TruthValue | RW | |
scalar · TruthValue · read-write · current If this is set to TRUE, then the D5 will attempt to recover automatically from a QAM-overscribed condition by shutting down active programs selectively. It selects which programs to shut down by order of most recently activated, checks the new bitrates, then continues to shutdown more programs as neccessary untill the total bandwidth fits within the QAM available bandwidth. | ||||
| Sd5vControlFilterCaDescMode | 1.3.6.1.4.1.4115.1.8.1.1.1.1.26 | INTEGER | RW | |
scalar · INTEGER · read-write · current If this is configured, then the D5 will remove CA_Descriptors from incoming streams. This includes descriptors in CAT and PMT tables, and in the case of PMT it includes the 1st and 2nd loop. This is set to 'neither' by default.
| ||||
| Sd5vControlAllowTsidDuplication | 1.3.6.1.4.1.4115.1.8.1.1.1.1.27 | TruthValue | RW | |
scalar · TruthValue · read-write · current If this is set to TRUE, then the D5 chassis can be configured with identical TSIDs on multiple QAM channels . Duplicate TSIDs should be used with some caution because the use of such is not currently compatible with conditional-access encryption, channel-container replication, or PSIG generation. This is set to FALSE by default. | ||||
| Sd5vControlPcrDriftCorrection | 1.3.6.1.4.1.4115.1.8.1.1.1.1.28 | TruthValue | RW | deprecated |
scalar · TruthValue · read-write · deprecated If this is set to TRUE, then PCR drift correction of input MPEG streams is enabled on the resultant output stream. Otherwise, the functionality is disabled. | ||||
| Sd5vControlProgramOverSubscription | 1.3.6.1.4.1.4115.1.8.1.1.1.1.29 | D5VideoProgramOverSubscriptionAction | RW | |
scalar · D5VideoProgramOverSubscriptionAction · read-write · current If this is set to TRUE, then the D5 will attempt to recover automatically from a QAM-overscribed condition by shutting down active programs selectively. It selects which programs to shut down by order of most recently activated, checks the new bitrates, then continues to shutdown more programs as neccessary untill the total bandwidth fits within the QAM available bandwidth. | ||||
| Sd5vControlProgramOverSubscriptionPeriod | 1.3.6.1.4.1.4115.1.8.1.1.1.1.30 | Unsigned32 | RW | deprecated |
scalar · Unsigned32 · read-write · deprecated The period of time in seconds over which bandwidth is monitored before an over-subscription action is triggered. | ||||
| Sd5vControlProgramOverSubscriptionThreshold | 1.3.6.1.4.1.4115.1.8.1.1.1.1.31 | Unsigned32 | RW | |
scalar · Unsigned32 · read-write · current The amount of bandwidth in percent by which a program stream may exceed it's configured limit before triggering the action specified by d5vControlProgramOverSubscription. | ||||
| Sd5vControlPreEncDetect | 1.3.6.1.4.1.4115.1.8.1.1.1.1.32 | TruthValue | RW | |
scalar · TruthValue · read-write · current If this is set to TRUE, then the D5 will detect Motorola pre-encrypted streams, and will avoid re-encrypting the traffic when forwarding it downstream. If set to TRUE, the d5vControlFilterCaDesc setting is ignored for any pre-encrypted streams that match this rule, because the stream could not otherwise be decrypted. | ||||
| Sd5vControlUtilPercentThresh | 1.3.6.1.4.1.4115.1.8.1.1.1.1.33 | Unsigned32 | RW | |
scalar · Unsigned32 · read-write · current The percentage utilization threshold of the QAM bandwidth at which the D5 will generate an alarm. The purpose of this is to facilitate monitoring of QAM bandwidth where the QAM might not necessarily be oversubscribed. | ||||
| Sd5vControlDefaultPidMappingProgramStart | 1.3.6.1.4.1.4115.1.8.1.1.1.1.34 | Unsigned32 (1..65535) | RW | |
scalar · Unsigned32 (1..65535) · read-write · current The starting program-number to map to the start of the default mapping pid range. | ||||
| Sd5vControlDefaultPidMappingProgramCount | 1.3.6.1.4.1.4115.1.8.1.1.1.1.35 | Unsigned32 (1..2048) | RW | |
scalar · Unsigned32 (1..2048) · read-write · current The number of programs to use for the default pid range. | ||||
| Sd5vControlDefaultPidMappingPidCount | 1.3.6.1.4.1.4115.1.8.1.1.1.1.36 | Unsigned32 (2..31) | RW | |
scalar · Unsigned32 (2..31) · read-write · current The number of PIDs to use per-program. Determines the PID offset for each program number in the default range. There is a legal limit of 4096 on the values of d5vControlDefaultPidMappingProgramCount multiplied by d5vControlDefaultPidMappingPidCount. | ||||
| Sd5vControlOnProgramConflictDisconnectOlderStream | 1.3.6.1.4.1.4115.1.8.1.1.1.1.37 | TruthValue | RW | |
scalar · TruthValue · read-write · current If enabled, program conflicts trigger the older of the two streams to be disconnected. I.E. the newer stream takes the program number. NOTE: this only affects streams which have the same destination udp&IP values, and differ by source-IP. | ||||
| Sd5vControlPcrDriftCorrectionGain | 1.3.6.1.4.1.4115.1.8.1.1.1.1.38 | Unsigned32 (0..10000) | RW | deprecated |
scalar · Unsigned32 (0..10000) · read-write · deprecated Gain-control used in PCR-drift calculation. In units of 1/10000.
| ||||
| Sd5vControlPcrDriftCorrectionUpperThreshold | 1.3.6.1.4.1.4115.1.8.1.1.1.1.39 | Unsigned32 (0..10000) | RW | deprecated |
scalar · Unsigned32 (0..10000) · read-write · deprecated Upper-threshold used in PCR-drift calculation. In units of tenths of milliseconds.
| ||||
| Sd5vControlPcrDriftCorrectionLowerThreshold | 1.3.6.1.4.1.4115.1.8.1.1.1.1.40 | Unsigned32 (0..1000) | RW | deprecated |
scalar · Unsigned32 (0..1000) · read-write · deprecated Lower-threshold used in PCR-drift calculation. In units of tenths of milliseconds.
| ||||
| Sd5vControlNullDroppingRate | 1.3.6.1.4.1.4115.1.8.1.1.1.1.41 | Unsigned32 (0..7500) | RW | deprecated |
scalar · Unsigned32 (0..7500) · read-write · deprecated The rate used when performing NULL packet dropping. In units of Kbps - setting will be rounded up to the nearest 150 Kbps multiple
| ||||
| Td5VideoQamStreamTable | 1.3.6.1.4.1.4115.1.8.1.1.1.2 | NA | ||
table · not-accessible · current This table stores MPEG Video related data on a per QAM channel basis. Ultimately this table will AUGMENT that supported by the QAM RF Manager but for the moment it is standalone but using the same index, ifIndex | ||||
| Rd5VideoQamStreamEntry | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1 | NA | ||
row · not-accessible · current
| ||||
| Cd5vQamNitPID | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.1 | D5PID | RW | |
column · D5PID · read-write · current The PID value to us when generating NIT tables on this QAM channel. The default value is 16, the DVB requirement | ||||
| Cd5vQamTransportStreamID | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.2 | Unsigned32 (0..65535) | RW | |
column · Unsigned32 (0..65535) · read-write · current The MPEG transport_stream_id used when transmitting PAT tables on this QAM channel. The default value is specific to the slot number where the QAM channel is located. | ||||
| Cd5vQamTsMibIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.3 | D5TransportStreamIndex | RO | |
column · D5TransportStreamIndex · read-only · current The index of the outgoing Transport Stream on this QAM channel. A value of 0 means there are no MPEG Programs being transmitted at present, so there will be no related entry in the d5vTransportStreamTable. | ||||
| Cd5vQamTotalPatsTx | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of unique PAT Tables that have been generated for this QAM channel. | ||||
| Cd5vQamTotalProgramsTx | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.5 | Counter32 | RO | |
column · Counter32 · read-only · current The accumulated number of Programs transmitted on this QAM channel. | ||||
| Cd5vQamCurrentProgramsTx | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.6 | Gauge32 | RO | |
column · Gauge32 · read-only · current The number of Programs currently being transmitted on this QAM channel. | ||||
| Cd5vQamPatInterval | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.7 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Retransmission interval for PAT tables in milliseconds. | ||||
| Cd5vQamPmtInterval | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.8 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Retransmission interval for PMT tables in milliseconds. | ||||
| Cd5vQamNitInterval | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.9 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Retransmission interval for NIT tables in milliseconds. | ||||
| Cd5vQamSdtInterval | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.10 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Retransmission interval for SDT tables in milliseconds. | ||||
| Cd5vQamOriginalNetworkId | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.11 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current DVB original-network-id to be used in downstream . | ||||
| Cd5vQamNetworkId | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.12 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current DVB network-id to be used in downstream . | ||||
| Cd5vQamNetworkName | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.13 | DisplayString | RW | |
column · DisplayString · read-write · current DVB network-name to be used in downstream . | ||||
| Cd5vQamPassThroughType | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.14 | INTEGER | RW | |
column · INTEGER · read-write · current This can be used to disable the default Arris prog/pid remapping scheme, and use pass-through remapping instead. Can also be used to enable MPTS-pass-through mode.
| ||||
| Cd5vQamConfVideoSiStreamEnabled | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.15 | TruthValue | RW | |
column · TruthValue · read-write · current Used to enable/disable video-si-stream configuration. At least one of UDP/src-IP/dest-IP must be non-zero for this video-si-stream rule to be functional. | ||||
| Cd5vQamConfVideoSiStreamUdpDest | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.16 | Unsigned32 (0..65535) | RW | |
column · Unsigned32 (0..65535) · read-write · current Video-si-stream UDP destination port.(A value of 0 in a rule means that the udp-port can be ANY value for pattern-matching) | ||||
| Cd5vQamConfVideoSiStreamIpSrc | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.17 | IpAddress | RW | |
column · IpAddress · read-write · current Video-si-stream IP source address.(A value of 0 in a rule means that the src-IP can be ANY value for pattern-matching) | ||||
| Cd5vQamConfVideoSiStreamIpDest | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.18 | IpAddress | RW | |
column · IpAddress · read-write · current Video-si-stream IP destination address.(A value of 0 in a rule means that the dest-IP can be ANY value for pattern-matching) | ||||
| Cd5vQamActiveVideoSiStreamEnabled | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.19 | TruthValue | RO | |
column · TruthValue · read-only · current Used to indicate if the QAM is currently passing a video-si-stream. | ||||
| Cd5vQamActiveVideoSiStreamUdpDest | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.20 | Unsigned32 (0..65535) | RO | |
column · Unsigned32 (0..65535) · read-only · current Active video-si-stream UDP destination port. | ||||
| Cd5vQamActiveVideoSiStreamIpSrc | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.21 | IpAddress | RO | |
column · IpAddress · read-only · current Active video-si-stream IP source address. | ||||
| Cd5vQamActiveVideoSiStreamIpDest | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.22 | IpAddress | RO | |
column · IpAddress · read-only · current Active video-si-stream IP destination address. | ||||
| Cd5vQamStreamStatus | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.23 | D5TransportStreamStatus | RO | |
column · D5TransportStreamStatus · read-only · current Current status of this QAM Transport stream | ||||
| Cd5vQamTimeActivated | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.24 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime when this stream was last activated. Zero if not-applicable. | ||||
| Cd5vQamTimeActive | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.25 | Counter32 | RO | |
column · Counter32 · read-only · current The total time that MPEG stream has been active.
| ||||
| Cd5vQamTimeDeactivated | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.26 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime when this stream was last deactivated. Zero if not-known. | ||||
| Cd5vQamAutoGeneratePAT | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.27 | D5GeneratePat | RW | |
column · D5GeneratePat · read-write · current Flag specifying whether or not the auto-generation by the D5 of PAT tables is enabled | ||||
| Cd5vQamAutoGenerateCAT | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.28 | TruthValue | RW | |
column · TruthValue · read-write · current Flag specifying whether or not the auto-generation by the D5 of CAT tables is enabled | ||||
| Cd5vQamAutoGeneratePMT | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.29 | TruthValue | RW | |
column · TruthValue · read-write · current Flag specifying whether or not the auto-generation by the D5 of PMT tables is enabled | ||||
| Cd5vQamAutoGenerateNIT | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.30 | TruthValue | RW | |
column · TruthValue · read-write · current Flag specifying whether or not the auto-generation by the D5 of NIT tables is enabled(and the associated entry in the PAT table for the NIT-PID) | ||||
| Cd5vQamAutoGenerateSDT | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.31 | TruthValue | RW | |
column · TruthValue · read-write · current Flag specifying whether or not the auto-generation by the D5 of SDT tables is enabled | ||||
| Cd5vQamAutoGenerateTDT | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.32 | TruthValue | RW | |
column · TruthValue · read-write · current Flag specifying whether or not the auto-generation by the D5 of TDT tables is enabled | ||||
| Cd5vQamAutoGenerateTOT | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.33 | TruthValue | RW | |
column · TruthValue · read-write · current Flag specifying whether or not the auto-generation by the D5 of TOT tables is enabled | ||||
| Cd5vQamCatInterval | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.34 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Retransmission interval for CAT tables in milliseconds. | ||||
| Cd5vQamMaxProgramsPerQamChannel | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.35 | Unsigned32 (0..63) | RW | |
column · Unsigned32 (0..63) · read-write · current Maximum number of programs allowed on a Qam channel at any one time.(Some QAM H/W may restrict to 31) | ||||
| Cd5vQamAllowEsDvbPids | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.36 | TruthValue | RW | |
column · TruthValue · read-write · current Flag that determines whether or not DVB-reserved PIDS are allowed to be used for elementary-streams. | ||||
| Cd5vQamDefaultMappingScheme | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.37 | D5VideoDefaultMappingScheme | RW | |
column · D5VideoDefaultMappingScheme · read-write · current The mapping scheme to be used for input transport-streams that have no associated static-configuration. NOTE: the udpPortLegacy scheme cannot be configured against an individual QAM-channel. If so desired, it may be turned on globally in the d5vControlDefaultMappingScheme MIB entry. | ||||
| Cd5vQamFastPsiTableUpdates | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.38 | TruthValue | RW | |
column · TruthValue · read-write · current If this is set to TRUE, then PSI table updates are sent down the RF as soon as the new PSI table has been calculated. Otherwise, PSI table updates are made in such a way that the repetition interval for that table on the RF remains constant. (Set to FALSE by default) | ||||
| Cd5vQamCycleOutputPids | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.39 | TruthValue | RW | |
column · TruthValue · read-write · current If this is set to TRUE, then the D5 cycles through the pool of unused PIDs when creating new PID remappings. The purpose of this is to limit the amound of PID reusage E.g. if a set-top using a buffered PMT table to view a program where the program may have been deleted and the PIDs may be in use by a different program now. (Set to FALSE by default ) | ||||
| Cd5vQamOverSubscribed | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.40 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates if the bandwidth of this QAM is currently over-subscribed. If the QAM is currently over-subscribed, some programs will suffer packet-loss. The affected programs are identified in the d5QamProgramPcrBufferTable. | ||||
| Cd5vQamOverSubscriptionSafetyMargin | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.41 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The amount of bandwidth in Kbps for the D5 to maintain as unused bandwidth on each QAM. Purpose of this being to help prevent over-subscription from occuring at the cost of some wasted bandwidth. | ||||
| Cd5vQamOverSubscriptionRecoveryEnabled | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.42 | TruthValue | RW | |
column · TruthValue · read-write · current If this is set to TRUE, then the D5 will attempt to recover automatically from a QAM-overscribed condition by shutting down active programs selectively. It selects which programs to shut down by order of most recently activated, checks the new bitrates, then continues to shutdown more programs as neccessary untill the total bandwidth fits within the QAM available bandwidth. | ||||
| Cd5vQamFilterCaDescMode | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.43 | INTEGER | RW | |
column · INTEGER · read-write · current If this is configured, then the D5 will remove CA_Descriptors from incoming streams destined for this QAM. This includes descriptors in CAT and PMT tables, and in the case of PMT includes the 1st and 2nd loop. This is set to 'neither' by default.
| ||||
| Cd5vQamPcrDriftCorrection | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.44 | TruthValue | RW | deprecated |
column · TruthValue · read-write · deprecated If this is set to TRUE, then PCR drift correction of input MPEG streams is enabled on the resultant output stream. Otherwise, the functionality is disabled. | ||||
| Cd5vQamPreEncDetect | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.45 | TruthValue | RW | |
column · TruthValue · read-write · current If this is set to TRUE, then the D5 will detect Motorola pre-encrypted streams, and will avoid re-encrypting the traffic when forwarding it downstream. If set to TRUE, the d5vControlFilterCaDesc setting is ignored for any pre-encrypted streams that match this rule, because the stream could not otherwise be decrypted. | ||||
| Cd5vQamUtilPercentThresh | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.46 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current The percentage utilization threshold of the QAM bandwidth at which the D5 will generate an alarm. The purpose of this is to facilitate monitoring of QAM bandwidth where the QAM might not necessarily be oversubscribed. | ||||
| Cd5vQamOnProgramConflictDisconnectOlderStream | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.47 | TruthValue | RW | |
column · TruthValue · read-write · current If enabled, program conflicts trigger the older of the two streams to be disconnected. I.E. the newer stream takes the program number. NOTE: this only affects streams which have the same destination udp&IP values, and differ by source-IP. | ||||
| Cd5vQamNullDroppingRate | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.48 | Unsigned32 (0..7500) | RW | deprecated |
column · Unsigned32 (0..7500) · read-write · deprecated The rate used when performing NULL packet dropping. In units of Kbps - setting will be rounded up to the nearest 150 Kbps multiple
| ||||
| Cd5vQamConfVideoSiStreamTsidRemap | 1.3.6.1.4.1.4115.1.8.1.1.1.2.1.49 | TruthValue | RW | |
column · TruthValue · read-write · current The default behaviour of video-si streams is not to remap the ingress Transport_Stream_id so that the TS_ID in the PAT matches the value in the other SI tables. Enabling this parameter, overrides the default behaviour and remaps the TS_ID in the PAT to the value configured on the QAM channel. NOTE: this only affects streams which are configured as video-si-stream. | ||||
| Td5VideoUdpIpStreamTable | 1.3.6.1.4.1.4115.1.8.1.1.1.3 | NA | ||
table · not-accessible · current This table displays the current incoming Transport Streams and can be configured with specific rules to override the default Program Number mappings. This table has a higher precedence than the d5VideoUdpPortPnTable. If the IP Address associated with an incoming TS matches a configured entry in this table then the associated mapping will apply, otherwise the default mapping from d5vUdpPortPnTable will apply and an dynamic entry will be created in this table. Active entries contain a reference to either a specific QAM or a specific channel-container. When a stream is treated as a virtual-program, the d5vIpActiveChanContName field is set to indicate which channel-container this stream is being mapped to. For any individual active entry in this table, either d5vIpActiveQamIfIndex or d5vIpActiveChanContName is set - not both. | ||||
| Rd5VideoUdpIpStreamEntry | 1.3.6.1.4.1.4115.1.8.1.1.1.3.1 | NA | ||
row · not-accessible · current | ||||
| Cd5vIpUdpIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.1 | Unsigned32 (0..65535) | RC | |
column · Unsigned32 (0..65535) · read-create · current The destination UDP Port to be mapped to the specified QAM Channel and Program Number.(A value of 0 in a rule means that the udp-port can be ANY value for pattern-matching) | ||||
| Cd5vIpSrcIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The SRC IP address of the TS to be mapped to the specified QAM Channel and Program Number.(A value of 0 in a rule means that the src-IP can be ANY value for pattern-matching ) | ||||
| Cd5vIpDestIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current The DEST IP address of the TS to be mapped to the specified QAM Channel and Program Number.(A value of 0 in a rule means that the dest-IP can be ANY value for pattern-matching) | ||||
| Cd5vIpRowStatus | 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for controlling entries in this table. | ||||
| Cd5vIpTsMibIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.5 | D5TransportStreamIndex | RO | |
column · D5TransportStreamIndex · read-only · current The index of the entry in the d5VideoStreamTable for corresponding to this table entry. | ||||
| Cd5vIpMappingType | 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.6 | D5MappingType | RO | |
column · D5MappingType · read-only · current The type of entry, configured or dynamic. | ||||
| Cd5vIpConfQamIfIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.7 | InterfaceIndexOrZero | RC | |
column · InterfaceIndexOrZero · read-create · current The ifIndex of the QAM channel that this IP transport stream is configured to be mapped to. A value of 0 indicates that no mapping is configured. | ||||
| Cd5vIpStreamStatus | 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.8 | D5TransportStreamStatus | RO | |
column · D5TransportStreamStatus · read-only · current Current status of this IP Transport stream | ||||
| Cd5vIpActiveQamIfIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.9 | InterfaceIndexOrZero | RO | |
column · InterfaceIndexOrZero · read-only · current The ifIndex of the QAM channel that this stream is currently mapped to. | ||||
| Cd5vIpActiveChanContName | 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.10 | D5VideoChannelContainerNameType | RO | |
column · D5VideoChannelContainerNameType · read-only · current The name of the channel-container that this stream is currently mapped to. | ||||
| Cd5vIpTimeActivated | 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.11 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime when this stream was last activated. Zero if not-applicable. | ||||
| Cd5vIpTimeActive | 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.12 | Counter32 | RO | |
column · Counter32 · read-only · current The total time that MPEG stream has been active.
| ||||
| Cd5vIpTimeDeactivated | 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.13 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime when this stream was last deactivated. Zero if not-known. | ||||
| Cd5vIpConfProgPassThroughEnabled | 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.14 | TruthValue | RC | |
column · TruthValue · read-create · current This can be used to configure default PROG remapping for this stream. If this is set to TRUE, input PROGs are mapped to identical output PROGs (as if pass-through mode were enabled on the QAM). | ||||
| Cd5vIpActiveProgPassThroughEnabled | 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.15 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates if default PROG-remapping is currently enabled for this stream. (May differ from the value of d5vIpConfProgPassThroughEnabled where a dynamic entry is created based on static-rules). | ||||
| Cd5vIpConfPidPassThroughEnabled | 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.16 | TruthValue | RC | |
column · TruthValue · read-create · current This can be used to configure default PID remapping for this stream. If this is set to TRUE, input PIDs are mapped to identical output PIDs (as if pass-through mode were enabled on the QAM). | ||||
| Cd5vIpActivePidPassThroughEnabled | 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.17 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates if default PID-remapping is currently enabled for this stream. (May differ from the value of d5vIpConfPidPassThroughEnabled where a dynamic entry is created based on static-rules). | ||||
| Cd5vIpConfRedundantMulticast | 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.18 | TruthValue | RC | |
column · TruthValue · read-create · current This can be used to configure a video stream for redundancy May be set to TRUE only if the d5vIpSrcIndex is set to 0 and the d5vIpDestIndex is set to a valid multicast address and the d5vIpUdpIndex is set to a non-zero value. When this value is set to TRUE, the D5 WAN card doesn't distinguish between packets with different srcIp values, where the d5vIpUdpIndex and d5vIpDestIndex match this rule. | ||||
| Cd5vIpActiveRedundantMulticast | 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.19 | TruthValue | RC | |
column · TruthValue · read-create · current Indicates if redundant-multicast is currently enabled for this stream. (May differ from the value of d5vIpConfRedundantMulticast where a dynamic entry is created based on static-rules). | ||||
| Cd5vIpConfPersistence | 1.3.6.1.4.1.4115.1.8.1.1.1.3.1.20 | D5PersistenceType | RC | |
column · D5PersistenceType · read-create · current This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. This setting is only meaningful for entries that have a d5vIpMappingType of static | ||||
| Td5VideoStreamTable | 1.3.6.1.4.1.4115.1.8.1.1.1.4 | NA | ||
table · not-accessible · current This table stores basic information on all Transport Streams in the D5. It covers both incoming and outgoing ones. The MPEG Manager automatically creates any entry in this table when it detects a new incoming TS or begins to generate a new outgoing TS. | ||||
| Rd5VideoStreamEntry | 1.3.6.1.4.1.4115.1.8.1.1.1.4.1 | NA | ||
row · not-accessible · current | ||||
| Cd5vStreamDirectionIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.4.1.1 | D5TransportStreamDirection | RO | |
column · D5TransportStreamDirection · read-only · current The direction of this Transport Stream. | ||||
| Cd5vStreamTsMibIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.4.1.2 | D5TransportStreamIndex | RO | |
column · D5TransportStreamIndex · read-only · current The unique index that identifies the Transport Stream within the D5. | ||||
| Cd5vStreamPatVersion | 1.3.6.1.4.1.4115.1.8.1.1.1.4.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The version number of the current PAT Table for this Transport Stream. | ||||
| Cd5vStreamTsID | 1.3.6.1.4.1.4115.1.8.1.1.1.4.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The MPEG transport_stream_id in the PAT tables on this Transport Stream. | ||||
| Cd5vStreamProgramCount | 1.3.6.1.4.1.4115.1.8.1.1.1.4.1.5 | Gauge32 | RO | |
column · Gauge32 · read-only · current The number of Programs currently in this Transport Stream. | ||||
| Cd5vStreamPatCurrTimeCreated | 1.3.6.1.4.1.4115.1.8.1.1.1.4.1.6 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime when the current PAT was created. Zero if not-applicable. | ||||
| Cd5vStreamPatCurrTimeActive | 1.3.6.1.4.1.4115.1.8.1.1.1.4.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The total time the current PAT has been active.
| ||||
| Cd5vStreamPatPrevTimeCreated | 1.3.6.1.4.1.4115.1.8.1.1.1.4.1.8 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime when the predecessor of this PAT was created. Zero if not-known. | ||||
| Cd5vStreamCatVersion | 1.3.6.1.4.1.4115.1.8.1.1.1.4.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The version number of the current CAT Table for this Transport Stream. | ||||
| Cd5vStreamCatCurrTimeCreated | 1.3.6.1.4.1.4115.1.8.1.1.1.4.1.10 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime when the current CAT was created. Zero if not-applicable. | ||||
| Cd5vStreamCatCurrTimeActive | 1.3.6.1.4.1.4115.1.8.1.1.1.4.1.11 | Counter32 | RO | |
column · Counter32 · read-only · current The total time the current CAT has been active.
| ||||
| Cd5vStreamCatPrevTimeCreated | 1.3.6.1.4.1.4115.1.8.1.1.1.4.1.12 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime when the predecessor of this CAT was created. Zero if not-known. | ||||
| Td5VideoStreamProgramTable | 1.3.6.1.4.1.4115.1.8.1.1.1.5 | NA | ||
table · not-accessible · current This table stores basic information for each Program in each Transport Stream known to the D5. Each entry in d5VideoStreamTable will have at least one entry in this table. | ||||
| Rd5VideoStreamProgramEntry | 1.3.6.1.4.1.4115.1.8.1.1.1.5.1 | NA | ||
row · not-accessible · current | ||||
| Cd5vStreamProgTsMibIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.5.1.1 | D5TransportStreamIndex | RO | |
column · D5TransportStreamIndex · read-only · current The unique index that identifies the Transport Stream containing this Program. | ||||
| Cd5vStreamProgIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.5.1.2 | D5Program | RO | |
column · D5Program · read-only · current The Program Number for this program within the associated Transport Stream. | ||||
| Cd5vStreamProgPmtVersion | 1.3.6.1.4.1.4115.1.8.1.1.1.5.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The version number of the current PMT Table for this Program. | ||||
| Cd5vStreamProgPmtPid | 1.3.6.1.4.1.4115.1.8.1.1.1.5.1.4 | D5PID | RO | |
column · D5PID · read-only · current The MPEG PID used for the PMT Table for this Program. | ||||
| Cd5vStreamProgPcrPid | 1.3.6.1.4.1.4115.1.8.1.1.1.5.1.5 | D5PID | RO | |
column · D5PID · read-only · current The MPEG PID used to for the PCR for this Program. | ||||
| Cd5vStreamProgEsCount | 1.3.6.1.4.1.4115.1.8.1.1.1.5.1.6 | Gauge32 | RO | |
column · Gauge32 · read-only · current The number of Elementary Streams currently in this Program. | ||||
| Cd5vStreamProgDescCount | 1.3.6.1.4.1.4115.1.8.1.1.1.5.1.7 | Gauge32 | RO | |
column · Gauge32 · read-only · current The number of Descriptors in the PMT 'first_loop' for this Program. | ||||
| Cd5vStreamPmtCurrTimeCreated | 1.3.6.1.4.1.4115.1.8.1.1.1.5.1.8 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime when the current PMT was created. Zero if not-applicable. | ||||
| Cd5vStreamPmtCurrTimeActive | 1.3.6.1.4.1.4115.1.8.1.1.1.5.1.9 | Counter32 | RO | |
column · Counter32 · read-only · current The total time the current PMT has been active.
| ||||
| Cd5vStreamPmtPrevTimeCreated | 1.3.6.1.4.1.4115.1.8.1.1.1.5.1.10 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime when the predecessor of this PMT was created. Zero if not-known. | ||||
| Cd5vStreamProgBitrate | 1.3.6.1.4.1.4115.1.8.1.1.1.5.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The bitate in Kbps, of this Program. This may have a value of 0 if the bitrate is not known. | ||||
| Td5VideoStreamEsTable | 1.3.6.1.4.1.4115.1.8.1.1.1.6 | NA | ||
table · not-accessible · current This table stores basic information for each Elementary Stream in each Transport Stream known to the D5. Each entry in d5VideoProgTable will have at least one entry in this table. These entries are created automatically as the D5 processes PMT table entries for each Elementary Stream in a Program | ||||
| Rd5VideoStreamEsEntry | 1.3.6.1.4.1.4115.1.8.1.1.1.6.1 | NA | ||
row · not-accessible · current | ||||
| Cd5vStreamEsTsMibIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.6.1.1 | D5TransportStreamIndex | RO | |
column · D5TransportStreamIndex · read-only · current The unique index that identifies the Transport Stream containing this Program. | ||||
| Cd5vStreamEsProgIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.6.1.2 | D5Program | RO | |
column · D5Program · read-only · current The Program Number for this program within the associated Transport Stream. | ||||
| Cd5vStreamEsPidIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.6.1.3 | D5PID | RO | |
column · D5PID · read-only · current The MPEG PID used for this Elementary Stream. | ||||
| Cd5vStreamEsType | 1.3.6.1.4.1.4115.1.8.1.1.1.6.1.4 | D5ElementaryStreamType | RO | |
column · D5ElementaryStreamType · read-only · current The type of this Elementary Streams. | ||||
| Cd5vStreamEsDescCount | 1.3.6.1.4.1.4115.1.8.1.1.1.6.1.5 | Gauge32 | RO | |
column · Gauge32 · read-only · current The number of Descriptors in the PMT 'second_loop' for this Elementary Stream. | ||||
| Td5VideoStreamDescTable | 1.3.6.1.4.1.4115.1.8.1.1.1.7 | NA | ||
table · not-accessible · current This table stores MPEG Descriptors for each Elementary Stream and Program known to the D5. The PMT PID is used to index Program Descriptors while the Elementary Stream PID is used when indexing ES Descriptors. | ||||
| Rd5VideoStreamDescEntry | 1.3.6.1.4.1.4115.1.8.1.1.1.7.1 | NA | ||
row · not-accessible · current | ||||
| Cd5vStreamDescTsMibIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.7.1.1 | D5TransportStreamIndex | RO | |
column · D5TransportStreamIndex · read-only · current The unique index that identifies the Transport Stream containing this Descriptor. | ||||
| Cd5vStreamDescPidIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.7.1.2 | D5PID | RO | |
column · D5PID · read-only · current The MPEG PID used for this Elementary Stream. | ||||
| Cd5vStreamDescIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.7.1.3 | D5DescriptorIndex | RO | |
column · D5DescriptorIndex · read-only · current The Descriptor index. | ||||
| Cd5vStreamDescTag | 1.3.6.1.4.1.4115.1.8.1.1.1.7.1.4 | D5DescriptorTag | RO | |
column · D5DescriptorTag · read-only · current The Descriptor tag. | ||||
| Cd5vStreamDescLen | 1.3.6.1.4.1.4115.1.8.1.1.1.7.1.5 | INTEGER (1..255) | RO | |
column · INTEGER (1..255) · read-only · current The Descriptor length. | ||||
| Cd5vStreamDescData | 1.3.6.1.4.1.4115.1.8.1.1.1.7.1.6 | D5DescriptorBuffer | RO | |
column · D5DescriptorBuffer · read-only · current The Descriptor data. | ||||
| Td5VideoLookupTsidToIfIndexTable | 1.3.6.1.4.1.4115.1.8.1.1.1.8 | NA | ||
table · not-accessible · current This table maps the transport_stream_id of a Transport Stream on a QAM channel to the ifIndex for that channel. | ||||
| Rd5VideoLookupTsidToIfIndexEntry | 1.3.6.1.4.1.4115.1.8.1.1.1.8.1 | NA | ||
row · not-accessible · current | ||||
| Cd5vLookupTsidIfIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.8.1.1 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current The ifIndex for the QAM channel transmitting this transport_stream_id. | ||||
| Td5VideoLookupTsMibIndexToIfIndexTable | 1.3.6.1.4.1.4115.1.8.1.1.1.9 | NA | ||
table · not-accessible · current This table maps the TsIndex of an outgoing Transport Stream on a QAM channel to the ifIndex for that channel. The Transport Stream is assumed to be an 'outgoing' one. | ||||
| Rd5VideoLookupTsMibIndexToIfIndexEntry | 1.3.6.1.4.1.4115.1.8.1.1.1.9.1 | NA | ||
row · not-accessible · current
| ||||
| Cd5vLookupTsIndexIfIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.9.1.1 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current The ifIndex for the QAM channel transmitting this TransportStreamIndex. | ||||
| Td5VideoLookupQamTsMibIndexToInTsMibIndexTable | 1.3.6.1.4.1.4115.1.8.1.1.1.10 | NA | ||
table · not-accessible · current This table maps the TransportStreamIndex of a Transport Stream
on a QAM channel to the corresponding incoming
TransportStreamIndexes.
d5vTsMibIndex - an outgoing Transport Stream
d5vInTsMibIndex - the corresponding incoming Transport
Stream. | ||||
| Rd5VideoLookupQamTsMibIndexToInTsMibIndexEntry | 1.3.6.1.4.1.4115.1.8.1.1.1.10.1 | NA | ||
row · not-accessible · current | ||||
| Cd5vLookupInTsMibIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.10.1.1 | D5TransportStreamIndex | RO | |
column · D5TransportStreamIndex · read-only · current MIB TsIndex for an incoming transport stream(IP). | ||||
| Td5VideoLookupTsMibIndexToUdpIpTable | 1.3.6.1.4.1.4115.1.8.1.1.1.11 | NA | ||
table · not-accessible · current This table maps the TransportStreamIndex of an incoming Transport Stream to the IP address and UDP port for that Transport Stream. | ||||
| Rd5VideoLookupTsMibIndexToUdpIpEntry | 1.3.6.1.4.1.4115.1.8.1.1.1.11.1 | NA | ||
row · not-accessible · current
| ||||
| Cd5vLookupTsMibIndexUdpPort | 1.3.6.1.4.1.4115.1.8.1.1.1.11.1.1 | Unsigned32 (1..65535) | RO | |
column · Unsigned32 (1..65535) · read-only · current The UDP receiving the Transport Stream for TransportStreamIndex. | ||||
| Cd5vLookupTsMibIndexIpAddressSrc | 1.3.6.1.4.1.4115.1.8.1.1.1.11.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The SRC IP address receiving the Transport Stream for TransportStreamIndex. | ||||
| Cd5vLookupTsMibIndexIpAddressDest | 1.3.6.1.4.1.4115.1.8.1.1.1.11.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The DEST IP address receiving the Transport Stream for TransportStreamIndex. | ||||
| Td5VideoUdpIpStreamProgRemapTable | 1.3.6.1.4.1.4115.1.8.1.1.1.12 | NA | ||
table · not-accessible · current This table displays the active Program mappings for Transport Streams. It is indexed using udp/ip/ip/inProg/qamIfIndex to support multiple output programs for each input program. | ||||
| Rd5VideoUdpIpStreamProgRemapEntry | 1.3.6.1.4.1.4115.1.8.1.1.1.12.1 | NA | ||
row · not-accessible · current | ||||
| Cd5vProgRemapUdpIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.12.1.1 | Unsigned32 (0..65535) | RO | |
column · Unsigned32 (0..65535) · read-only · current The destination UDP Port of the incoming TS. | ||||
| Cd5vProgRemapIpSrcIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.12.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The SRC IP address of the incoming TS. | ||||
| Cd5vProgRemapIpDestIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.12.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The DEST IP address of the incoming TS. | ||||
| Cd5vProgRemapInProgIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.12.1.4 | D5Program | RO | |
column · D5Program · read-only · current The incoming Program value related to this Program remapping. | ||||
| Cd5vProgRemapActiveQamIfIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.12.1.5 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current The ifIndex of the QAM channel that this Program remapping applies to. | ||||
| Cd5vProgRemapOutProg | 1.3.6.1.4.1.4115.1.8.1.1.1.12.1.6 | D5Program | RO | |
column · D5Program · read-only · current The output Program value related to this Program mapping rule. | ||||
| Cd5vProgRemapStatus | 1.3.6.1.4.1.4115.1.8.1.1.1.12.1.7 | D5ProgStatus | RO | |
column · D5ProgStatus · read-only · current Current status of this Program - whether active or not | ||||
| Cd5vProgRemapActiveProgType | 1.3.6.1.4.1.4115.1.8.1.1.1.12.1.8 | D5ProgType | RO | |
column · D5ProgType · read-only · current The type of Program whether PSI or Elementary stream. | ||||
| Cd5vProgRemapTimeActivated | 1.3.6.1.4.1.4115.1.8.1.1.1.12.1.9 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime when this Program was last activated. Zero if not-applicable. | ||||
| Cd5vProgRemapTimeActive | 1.3.6.1.4.1.4115.1.8.1.1.1.12.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The total time that the Program has been active.
| ||||
| Cd5vProgRemapTimeDeactivated | 1.3.6.1.4.1.4115.1.8.1.1.1.12.1.11 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime when this Program was last deactivated. Zero if not-known. | ||||
| Td5VideoUdpIpStreamPidRemapTable | 1.3.6.1.4.1.4115.1.8.1.1.1.13 | NA | ||
table · not-accessible · current This table displays the active PID mappings for Transport Streams. It is indexed using udp/ip/ip/inPid/qamIfIndex to support multiple output programs for each input program. | ||||
| Rd5VideoUdpIpStreamPidRemapEntry | 1.3.6.1.4.1.4115.1.8.1.1.1.13.1 | NA | ||
row · not-accessible · current | ||||
| Cd5vPidRemapUdpIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.13.1.1 | Unsigned32 (0..65535) | RO | |
column · Unsigned32 (0..65535) · read-only · current The destination UDP Port of the incoming TS. | ||||
| Cd5vPidRemapIpSrcIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.13.1.2 | IpAddress | RO | |
column · IpAddress · read-only · current The SRC IP address of the incoming TS. | ||||
| Cd5vPidRemapIpDestIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.13.1.3 | IpAddress | RO | |
column · IpAddress · read-only · current The DEST IP address of the incoming TS. | ||||
| Cd5vPidRemapInPidIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.13.1.4 | D5PID | RO | |
column · D5PID · read-only · current The incoming PID value related to this PID remapping. | ||||
| Cd5vPidRemapActiveQamIfIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.13.1.5 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current The ifIndex of the QAM channel that this PID remapping applies to. | ||||
| Cd5vPidRemapOutPid | 1.3.6.1.4.1.4115.1.8.1.1.1.13.1.6 | D5PID | RO | |
column · D5PID · read-only · current The output PID value related to this PID mapping rule. | ||||
| Cd5vPidRemapStatus | 1.3.6.1.4.1.4115.1.8.1.1.1.13.1.7 | D5PidStatus | RO | |
column · D5PidStatus · read-only · current Current status of this PID - whether active or not | ||||
| Cd5vPidRemapActivePidType | 1.3.6.1.4.1.4115.1.8.1.1.1.13.1.8 | D5PidType | RO | |
column · D5PidType · read-only · current The type of PID whether PSI or Elementary stream. | ||||
| Cd5vPidRemapTimeActivated | 1.3.6.1.4.1.4115.1.8.1.1.1.13.1.9 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime when this PID was last activated. Zero if not-applicable. | ||||
| Cd5vPidRemapTimeActive | 1.3.6.1.4.1.4115.1.8.1.1.1.13.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The total time that the PID has been active.
| ||||
| Cd5vPidRemapTimeDeactivated | 1.3.6.1.4.1.4115.1.8.1.1.1.13.1.11 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime when this PID was last deactivated. Zero if not-known. | ||||
| Td5VideoRuleQamProgRemapTable | 1.3.6.1.4.1.4115.1.8.1.1.1.14 | NA | ||
table · not-accessible · current Table contains list of qam-channel based configured program remapping rules. | ||||
| Rd5VideoRuleQamProgRemapEntry | 1.3.6.1.4.1.4115.1.8.1.1.1.14.1 | NA | ||
row · not-accessible · current | ||||
| Cd5vRQamProgRowStatus | 1.3.6.1.4.1.4115.1.8.1.1.1.14.1.1 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for controlling entries in this table. | ||||
| Cd5vRQamProgOutProg | 1.3.6.1.4.1.4115.1.8.1.1.1.14.1.2 | D5Program | RC | |
column · D5Program · read-create · current The output Program value related to this rule. | ||||
| Cd5vRQamProgMatchLastTime | 1.3.6.1.4.1.4115.1.8.1.1.1.14.1.3 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime when this rule was last matched/used at run-time. Zero if not-applicable. | ||||
| Cd5vRQamProgMatchCount | 1.3.6.1.4.1.4115.1.8.1.1.1.14.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times this rule was matched/used at run-time. Zero if not-applicable. | ||||
| Cd5vRQamProgPersistence | 1.3.6.1.4.1.4115.1.8.1.1.1.14.1.5 | D5PersistenceType | RC | |
column · D5PersistenceType · read-create · current This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. | ||||
| Td5VideoRuleQamProgFilterTable | 1.3.6.1.4.1.4115.1.8.1.1.1.15 | NA | ||
table · not-accessible · current Table contains list of qam-channel based configured program filter rules. | ||||
| Rd5VideoRuleQamProgFilterEntry | 1.3.6.1.4.1.4115.1.8.1.1.1.15.1 | NA | ||
row · not-accessible · current | ||||
| Cd5vRQamProgFiltRowStatus | 1.3.6.1.4.1.4115.1.8.1.1.1.15.1.1 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for controlling entries in this table. | ||||
| Cd5vRQamProgFiltMatchLastTime | 1.3.6.1.4.1.4115.1.8.1.1.1.15.1.2 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime when this rule was last matched/used at run-time. Zero if not-applicable. | ||||
| Cd5vRQamProgFiltMatchCount | 1.3.6.1.4.1.4115.1.8.1.1.1.15.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times this rule was matched/used at run-time. Zero if not-applicable. | ||||
| Cd5vRQamProgFiltPersistence | 1.3.6.1.4.1.4115.1.8.1.1.1.15.1.4 | D5PersistenceType | RC | |
column · D5PersistenceType · read-create · current This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. | ||||
| Td5VideoRuleQamPidRemapTable | 1.3.6.1.4.1.4115.1.8.1.1.1.16 | NA | ||
table · not-accessible · current Table contains list of qam-channel based configured PID remapping rules. | ||||
| Rd5VideoRuleQamPidRemapEntry | 1.3.6.1.4.1.4115.1.8.1.1.1.16.1 | NA | ||
row · not-accessible · current
| ||||
| Cd5vRQamPidRowStatus | 1.3.6.1.4.1.4115.1.8.1.1.1.16.1.1 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for controlling entries in this table. | ||||
| Cd5vRQamPidOutPid | 1.3.6.1.4.1.4115.1.8.1.1.1.16.1.2 | D5PID | RC | |
column · D5PID · read-create · current The output PID value related to this rule. | ||||
| Cd5vRQamPidLastMatchTime | 1.3.6.1.4.1.4115.1.8.1.1.1.16.1.3 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime when this rule was last matched/used at run-time. Zero if not-applicable. | ||||
| Cd5vRQamPidMatchCount | 1.3.6.1.4.1.4115.1.8.1.1.1.16.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times this rule was matched/used at run-time. Zero if not-applicable. | ||||
| Cd5vRQamPidPersistence | 1.3.6.1.4.1.4115.1.8.1.1.1.16.1.5 | D5PersistenceType | RC | |
column · D5PersistenceType · read-create · current This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. | ||||
| Td5VideoRuleQamPidFilterTable | 1.3.6.1.4.1.4115.1.8.1.1.1.17 | NA | ||
table · not-accessible · current Table contains list of qam-channel based configured PID filter rules. | ||||
| Rd5VideoRuleQamPidFilterEntry | 1.3.6.1.4.1.4115.1.8.1.1.1.17.1 | NA | ||
row · not-accessible · current
| ||||
| Cd5vRQamPidFiltRowStatus | 1.3.6.1.4.1.4115.1.8.1.1.1.17.1.1 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for controlling entries in this table. | ||||
| Cd5vRQamPidFiltLastMatchTime | 1.3.6.1.4.1.4115.1.8.1.1.1.17.1.2 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime when this rule was last matched/used at run-time. Zero if not-applicable. | ||||
| Cd5vRQamPidFiltMatchCount | 1.3.6.1.4.1.4115.1.8.1.1.1.17.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times this rule was matched/used at run-time. Zero if not-applicable. | ||||
| Cd5vRQamPidFiltPersistence | 1.3.6.1.4.1.4115.1.8.1.1.1.17.1.4 | D5PersistenceType | RC | |
column · D5PersistenceType · read-create · current This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. | ||||
| Td5VideoRuleUdpIpProgFilterTable | 1.3.6.1.4.1.4115.1.8.1.1.1.18 | NA | ||
table · not-accessible · current Table contains list of UDP/IP based configured program filter rules. | ||||
| Rd5VideoRuleUdpIpProgFilterEntry | 1.3.6.1.4.1.4115.1.8.1.1.1.18.1 | NA | ||
row · not-accessible · current | ||||
| Cd5vRUdpIpProgFiltRowStatus | 1.3.6.1.4.1.4115.1.8.1.1.1.18.1.1 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for controlling entries in this table. | ||||
| Cd5vRUdpIpProgFiltMatchLastTime | 1.3.6.1.4.1.4115.1.8.1.1.1.18.1.2 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime when this rule was last matched/used at run-time. Zero if not-applicable. | ||||
| Cd5vRUdpIpProgFiltMatchCount | 1.3.6.1.4.1.4115.1.8.1.1.1.18.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times this rule was matched/used at run-time. Zero if not-applicable. | ||||
| Cd5vRUdpIpProgFiltPersistence | 1.3.6.1.4.1.4115.1.8.1.1.1.18.1.4 | D5PersistenceType | RC | |
column · D5PersistenceType · read-create · current This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. | ||||
| Td5VideoRuleUdpIpPidFilterTable | 1.3.6.1.4.1.4115.1.8.1.1.1.19 | NA | ||
table · not-accessible · current Table contains list of UDP/IP based configured PID filter rules. | ||||
| Rd5VideoRuleUdpIpPidFilterEntry | 1.3.6.1.4.1.4115.1.8.1.1.1.19.1 | NA | ||
row · not-accessible · current | ||||
| Cd5vRUdpIpPidFiltRowStatus | 1.3.6.1.4.1.4115.1.8.1.1.1.19.1.1 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for controlling entries in this table. | ||||
| Cd5vRUdpIpPidFiltLastMatchTime | 1.3.6.1.4.1.4115.1.8.1.1.1.19.1.2 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime when this rule was last matched/used at run-time. Zero if not-applicable. | ||||
| Cd5vRUdpIpPidFiltMatchCount | 1.3.6.1.4.1.4115.1.8.1.1.1.19.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times this rule was matched/used at run-time. Zero if not-applicable. | ||||
| Cd5vRUdpIpPidFiltPersistence | 1.3.6.1.4.1.4115.1.8.1.1.1.19.1.4 | D5PersistenceType | RC | |
column · D5PersistenceType · read-create · current This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. | ||||
| Td5VideoRuleUdpIpProgRemapTable | 1.3.6.1.4.1.4115.1.8.1.1.1.20 | NA | ||
table · not-accessible · current Table contains list of udp/ip based configured program remapping rules. | ||||
| Rd5VideoRuleUdpIpProgRemapEntry | 1.3.6.1.4.1.4115.1.8.1.1.1.20.1 | NA | ||
row · not-accessible · current | ||||
| Cd5vRUdpIpProgUdpIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.20.1.1 | Unsigned32 (0..65535) | RC | |
column · Unsigned32 (0..65535) · read-create · current The destination UDP Port of the incoming TS.(A value of 0 in a rule means that the udp-port can be ANY value for pattern-matching) | ||||
| Cd5vRUdpIpProgIpSrcIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.20.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The SRC IP address of the incoming TS.(NOTE: a value of '0' here indicates a don't care value for pattern-matching) | ||||
| Cd5vRUdpIpProgIpDestIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.20.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current The DEST IP address of the incoming TS.(NOTE: a value of '0' here indicates a don't care value for pattern-matching) | ||||
| Cd5vRUdpIpProgInProgIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.20.1.4 | D5Program | RC | |
column · D5Program · read-create · current The incoming Program value related to this Program remapping. | ||||
| Cd5vRUdpIpProgRowStatus | 1.3.6.1.4.1.4115.1.8.1.1.1.20.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for controlling entries in this table. | ||||
| Cd5vRUdpIpProgOutProg | 1.3.6.1.4.1.4115.1.8.1.1.1.20.1.6 | D5Program | RC | |
column · D5Program · read-create · current The output Program value related to this Program mapping rule. | ||||
| Cd5vRUdpIpProgMatchLastTime | 1.3.6.1.4.1.4115.1.8.1.1.1.20.1.7 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime when this rule was last matched/used at run-time. Zero if not-applicable. | ||||
| Cd5vRUdpIpProgMatchCount | 1.3.6.1.4.1.4115.1.8.1.1.1.20.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times this rule was matched/used at run-time. Zero if not-applicable. | ||||
| Cd5vRUdpIpProgPersistence | 1.3.6.1.4.1.4115.1.8.1.1.1.20.1.9 | D5PersistenceType | RC | |
column · D5PersistenceType · read-create · current This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. | ||||
| Cd5vRUdpIpProgExpectedBitrate | 1.3.6.1.4.1.4115.1.8.1.1.1.20.1.10 | Unsigned32 (0..65535) | RC | |
column · Unsigned32 (0..65535) · read-create · current The expected bitate in Kbps, of the video program. If this is set it is used to calculate the initial jitter-buffer size to be used for the program when it is activated. (may be set to 0 to indicated an unknown value) | ||||
| Td5VideoRuleUdpIpPidRemapTable | 1.3.6.1.4.1.4115.1.8.1.1.1.21 | NA | ||
table · not-accessible · current Table contains list of udp/ip based configured pid remapping rules. | ||||
| Rd5VideoRuleUdpIpPidRemapEntry | 1.3.6.1.4.1.4115.1.8.1.1.1.21.1 | NA | ||
row · not-accessible · current | ||||
| Cd5vRUdpIpPidUdpIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.21.1.1 | Unsigned32 (0..65535) | RC | |
column · Unsigned32 (0..65535) · read-create · current The destination UDP Port of the incoming TS.(A value of 0 in a rule means that the udp-port can be ANY value for pattern-matching) | ||||
| Cd5vRUdpIpPidIpSrcIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.21.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The SRC IP address of the incoming TS.(NOTE: a value of '0' here indicates a don't care value for pattern-matching rules) | ||||
| Cd5vRUdpIpPidIpDestIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.21.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current The DEST IP address of the incoming TS.(NOTE: a value of '0' here indicates a don't care value for pattern-matching rules) | ||||
| Cd5vRUdpIpPidInPidIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.21.1.4 | D5PID | RC | |
column · D5PID · read-create · current The incoming PID value related to this PID remapping. | ||||
| Cd5vRUdpIpPidRowStatus | 1.3.6.1.4.1.4115.1.8.1.1.1.21.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for controlling entries in this table. | ||||
| Cd5vRUdpIpPidOutPid | 1.3.6.1.4.1.4115.1.8.1.1.1.21.1.6 | D5PID | RC | |
column · D5PID · read-create · current The output PID value related to this PID mapping rule. | ||||
| Cd5vRUdpIpPidMatchLastTime | 1.3.6.1.4.1.4115.1.8.1.1.1.21.1.7 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime when this rule was last matched/used at run-time. Zero if not-applicable. | ||||
| Cd5vRUdpIpPidMatchCount | 1.3.6.1.4.1.4115.1.8.1.1.1.21.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times this rule was matched/used at run-time. Zero if not-applicable. | ||||
| Cd5vRUdpIpPidPersistence | 1.3.6.1.4.1.4115.1.8.1.1.1.21.1.9 | D5PersistenceType | RC | |
column · D5PersistenceType · read-create · current This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. | ||||
| Td5VideoUdpIpSiStreamTable | 1.3.6.1.4.1.4115.1.8.1.1.1.22 | NA | ||
table · not-accessible · current This table displays the statically allocated SI-streams. SI-streams are dedicated IP streams that provide SI table for a particular QAM channel. The data in an SI stream is sent to the QAM without any PID remapping and it is assumed that the SI-stream does not conflict with any elementary-streams, or auto-generated (P)SI tables. SI-streams are typically used when (P)SI table auto-generation is disabled on the D5. The variables d5vIpSiConfQamIfIndex and d5vIpSiConfChanContName are mutually exclusive, where a value of 0 for ifIndex or 0-length for d5vIpSiConfChanContName can be used to indicate an unspecified value. | ||||
| Rd5VideoUdpIpSiStreamEntry | 1.3.6.1.4.1.4115.1.8.1.1.1.22.1 | NA | ||
row · not-accessible · current | ||||
| Cd5vIpUdpSiIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.22.1.1 | Unsigned32 (0..65535) | RC | |
column · Unsigned32 (0..65535) · read-create · current The destination UDP Port to be mapped to the specified QAM Channel and Program Number. | ||||
| Cd5vIpSrcSiIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.22.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The SRC IP address of the SI TS to be mapped to the specified QAM Channel and Program Number. | ||||
| Cd5vIpDestSiIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.22.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current The DEST IP address of the SI TS to be mapped to the specified QAM Channel and Program Number. | ||||
| Cd5vIpSiRowStatus | 1.3.6.1.4.1.4115.1.8.1.1.1.22.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for controlling entries in this table. | ||||
| Cd5vIpSiTsMibIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.22.1.5 | D5TransportStreamIndex | RO | |
column · D5TransportStreamIndex · read-only · current The index of the entry in the d5VideoStreamTable for corresponding to this table entry. | ||||
| Cd5vIpSiConfQamIfIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.22.1.6 | InterfaceIndexOrZero | RC | |
column · InterfaceIndexOrZero · read-create · current The ifIndex of the QAM channel that this SI-stream is configured to be mapped to. | ||||
| Cd5vIpSiConfChanContName | 1.3.6.1.4.1.4115.1.8.1.1.1.22.1.7 | D5VideoChannelContainerNameType | RC | |
column · D5VideoChannelContainerNameType · read-create · current The name of the channel-container that this SI-stream is configured to be mapped to. | ||||
| Cd5vIpSiStreamStatus | 1.3.6.1.4.1.4115.1.8.1.1.1.22.1.8 | D5TransportStreamStatus | RO | |
column · D5TransportStreamStatus · read-only · current Current status of this IP SI Transport stream | ||||
| Cd5vIpSiTimeActivated | 1.3.6.1.4.1.4115.1.8.1.1.1.22.1.9 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime when this stream was last activated. Zero if not-applicable. | ||||
| Cd5vIpSiTimeActive | 1.3.6.1.4.1.4115.1.8.1.1.1.22.1.10 | Counter32 | RO | |
column · Counter32 · read-only · current The total time that MPEG stream has been active.
| ||||
| Cd5vIpSiTimeDeactivated | 1.3.6.1.4.1.4115.1.8.1.1.1.22.1.11 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime when this stream was last deactivated. Zero if not-known. | ||||
| Cd5vIpSiPersistence | 1.3.6.1.4.1.4115.1.8.1.1.1.22.1.12 | D5PersistenceType | RC | |
column · D5PersistenceType · read-create · current This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. | ||||
| Cd5vIpSiCopyback | 1.3.6.1.4.1.4115.1.8.1.1.1.22.1.13 | Unsigned32 (0..65535) | RO | |
column · Unsigned32 (0..65535) · read-only · current This is used to setup the SI stream as an EAS stream. | ||||
| Td5VideoChannelContainerTable | 1.3.6.1.4.1.4115.1.8.1.1.1.30 | NA | ||
table · not-accessible · current Table contains list of channel-containers that can be used
to group individual QAM-channels together. Channel-containers
can serve multiple purposes:
- group qam-channels to which an EMM can be multicast.
- group qam-channels to which an input transport-stream
can be replicated.
- ... | ||||
| Rd5VideoChannelContainerEntry | 1.3.6.1.4.1.4115.1.8.1.1.1.30.1 | NA | ||
row · not-accessible · current
| ||||
| Cd5vChanContName | 1.3.6.1.4.1.4115.1.8.1.1.1.30.1.1 | D5VideoChannelContainerNameType | RC | |
column · D5VideoChannelContainerNameType · read-create · current Channel-container identifier. | ||||
| Cd5vChanContRowStatus | 1.3.6.1.4.1.4115.1.8.1.1.1.30.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for controlling entries in this table. | ||||
| Cd5vChanContServiceId | 1.3.6.1.4.1.4115.1.8.1.1.1.30.1.3 | D5Program | RC | |
column · D5Program · read-create · current Common program-number used for virtual-programs in this channel-container. (may be set to 0 to indicate an unspecified value) | ||||
| Cd5vChanContPid | 1.3.6.1.4.1.4115.1.8.1.1.1.30.1.4 | D5PID | RC | |
column · D5PID · read-create · current Common PID used for EMM or PDG data in this channel- container. (may be set to 0 to indicate an unspecified value) | ||||
| Cd5vChanContPersistence | 1.3.6.1.4.1.4115.1.8.1.1.1.30.1.5 | D5PersistenceType | RC | |
column · D5PersistenceType · read-create · current This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. | ||||
| Td5VideoChannelContainerQamTable | 1.3.6.1.4.1.4115.1.8.1.1.1.31 | NA | ||
table · not-accessible · current Table contains list of QAM channel-container group memberships. A single QAM can be a member of multiple replication groups. A single QAM can also be a member of the same replication group multiple times, using different output programs. The index variables d5vChanContQamIfIndex and d5vChanContQamTsidIndex must be considered mutually exclusive, where a value of 0 for either ifIndex or TSID can be used to indicate an unspecified value. One of, but not both of, these must be non-zero in any particular row, in order to constitute a valid row-index. | ||||
| Rd5VideoChannelContainerQamEntry | 1.3.6.1.4.1.4115.1.8.1.1.1.31.1 | NA | ||
row · not-accessible · current | ||||
| Cd5vChanContQamIfIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.31.1.1 | InterfaceIndexOrZero | RC | |
column · InterfaceIndexOrZero · read-create · current The ifIndex of the QAM channel. (may be set to 0 to indicated an unspecified value) | ||||
| Cd5vChanContQamTsidIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.31.1.2 | Unsigned32 (0..65535) | RW | |
column · Unsigned32 (0..65535) · read-write · current The MPEG transport_stream_id of the QAM-channel. (may be set to 0 to indicated an unspecified value) | ||||
| Cd5vChanContQamProgIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.31.1.3 | D5Program | RC | |
column · D5Program · read-create · current The output program number associated with this membership rule. (may be set to 0 to indicated an unspecified value) | ||||
| Cd5vChanContQamRowStatus | 1.3.6.1.4.1.4115.1.8.1.1.1.31.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for controlling entries in this table. | ||||
| Cd5vChanContQamPersistence | 1.3.6.1.4.1.4115.1.8.1.1.1.31.1.5 | D5PersistenceType | RC | |
column · D5PersistenceType · read-create · current This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. | ||||
| Td5VideoChannelContainerVirtProgTable | 1.3.6.1.4.1.4115.1.8.1.1.1.32 | NA | ||
table · not-accessible · current Table contains list of virtual programs with their associated channel-container names. Virtual programs are used for creating replications where individual input streams are copied to to multiple concurrent output QAMs/Programs. (NOTE: a virtual-program can belong to no more than 1 channel-containers) | ||||
| Rd5VideoChannelContainerVirtProgEntry | 1.3.6.1.4.1.4115.1.8.1.1.1.32.1 | NA | ||
row · not-accessible · current | ||||
| Cd5vChanContVProgUdpIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.32.1.1 | Unsigned32 (0..65535) | RC | |
column · Unsigned32 (0..65535) · read-create · current The destination UDP Port of the incoming TS.(A value of 0 in a rule means that the udp-port can be ANY value for pattern-matching) | ||||
| Cd5vChanContVProgSrcIpIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.32.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The SRC IP address of the incoming TS.(NOTE: a value of '0' here indicates a don't care value for pattern-matching rules) | ||||
| Cd5vChanContVProgDestIpIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.32.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current The DEST IP address of the incoming TS.(NOTE: a value of '0' here indicates a don't care value for pattern-matching rules) | ||||
| Cd5vChanContVProgRowStatus | 1.3.6.1.4.1.4115.1.8.1.1.1.32.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for controlling entries in this table. | ||||
| Cd5vChanContVProgName | 1.3.6.1.4.1.4115.1.8.1.1.1.32.1.5 | D5VideoChannelContainerNameType | RC | |
column · D5VideoChannelContainerNameType · read-create · current Channel-container identifier. Must match an entry in the d5VideoChannelContainerTable table. | ||||
| Cd5vChanContVProgConfProgPassThroughEnabled | 1.3.6.1.4.1.4115.1.8.1.1.1.32.1.6 | TruthValue | RC | |
column · TruthValue · read-create · current This can be used to configure default PROG remapping for this stream. If this is set to TRUE, input PROGs are mapped to identical output PIDs (as if pass-through mode were enabled on the QAM). | ||||
| Cd5vChanContVProgConfPidPassThroughEnabled | 1.3.6.1.4.1.4115.1.8.1.1.1.32.1.7 | TruthValue | RC | |
column · TruthValue · read-create · current This can be used to configure default PID remapping for this stream. If this is set to TRUE, input PIDs are mapped to identical output PIDs (as if pass-through mode were enabled on the QAM). | ||||
| Cd5vChanContVProgConfRedundantMulticast | 1.3.6.1.4.1.4115.1.8.1.1.1.32.1.8 | TruthValue | RC | |
column · TruthValue · read-create · current This can be used to configure a video stream for redundancy May be set to TRUE only if the d5vIpSrcIndex is set to 0 and the d5vIpDestIndex is set to a valid multicast address and the d5vIpUdpIndex is set to a non-zero value. When this value is set to TRUE, the D5 WAN card doesn't distinguish between packets with different srcIp values, where the d5vIpUdpIndex and d5vIpDestIndex match this rule. | ||||
| Cd5vChanContVProgPersistence | 1.3.6.1.4.1.4115.1.8.1.1.1.32.1.9 | D5PersistenceType | RC | |
column · D5PersistenceType · read-create · current This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. | ||||
| Cd5vChanContVProgExpectedBitrate | 1.3.6.1.4.1.4115.1.8.1.1.1.32.1.10 | Unsigned32 (0..65535) | RC | |
column · Unsigned32 (0..65535) · read-create · current The expected bitate in Kbps, of the video program. If this is set it is used to calculate the initial jitter-buffer size to be used for the program when it is activated. (may be set to 0 to indicated an unknown value) | ||||
| Cd5vChanContVProgConfVideoSiStreamEnabled | 1.3.6.1.4.1.4115.1.8.1.1.1.32.1.11 | TruthValue | RC | |
column · TruthValue · read-create · current Used to configure this virtual-program to be treated as a video-si-stream. | ||||
| Td5VideoQamJitterTable | 1.3.6.1.4.1.4115.1.8.1.1.1.33 | NA | ||
table · not-accessible · current This Table contains list of rules that regulate the amount of jitter buffering in milliseconds that is used used for video programs. Can be used to increase jitter buffering so that the D5 will smooth out video programs that may have a lot of jitter, or alternatively to decrease jitter buffering so that the latency through the D5 is reduced. The low and high bitrate thresholds are not allowed to overlap between rules that share the same ifIndex and serviceId . | ||||
| Rd5VideoQamJitterEntry | 1.3.6.1.4.1.4115.1.8.1.1.1.33.1 | NA | ||
row · not-accessible · current | ||||
| Cd5vQamJitterIfIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.33.1.1 | InterfaceIndexOrZero | RC | |
column · InterfaceIndexOrZero · read-create · current The ifIndex of the QAM channel associated with this rule. (may be set to 0 to indicated an unspecified value) | ||||
| Cd5vQamJitterServiceId | 1.3.6.1.4.1.4115.1.8.1.1.1.33.1.2 | D5Program | RC | |
column · D5Program · read-create · current The output program number associated with this rule. (may be set to 0 to indicated an unspecified value) | ||||
| Cd5vQamJitterThreshBitrateLow | 1.3.6.1.4.1.4115.1.8.1.1.1.33.1.3 | Unsigned32 (0..65535) | RW | |
column · Unsigned32 (0..65535) · read-write · current The lower bitate threshold in Kbps, of the video stream(s) for which this jitter setting is to be used. (may be set to 0 to indicated an unspecified lower value) | ||||
| Cd5vQamJitterThreshBitrateHigh | 1.3.6.1.4.1.4115.1.8.1.1.1.33.1.4 | Unsigned32 (0..65535) | RW | |
column · Unsigned32 (0..65535) · read-write · current The upper bitate threshold in Kbps, of the video stream(s) for which this jitter setting is to be used. (may be set to 0 to indicated an unspecified upper value) | ||||
| Cd5vQamJitterMilliseconds | 1.3.6.1.4.1.4115.1.8.1.1.1.33.1.5 | Unsigned32 (0..500) | RW | |
column · Unsigned32 (0..500) · read-write · current The setting for jitter-buffer length in milliseconds for video programs matching this rule. Can be set to a small value to reduce latency through the box, or set to a higher value to compensate for more jitter in the input video stream. | ||||
| Cd5vQamJitterRowStatus | 1.3.6.1.4.1.4115.1.8.1.1.1.33.1.6 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for controlling entries in this table. | ||||
| Cd5vQamJitterPersistence | 1.3.6.1.4.1.4115.1.8.1.1.1.33.1.7 | D5PersistenceType | RC | |
column · D5PersistenceType · read-create · current This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. | ||||
| Td5VideoQamJitterStatusTable | 1.3.6.1.4.1.4115.1.8.1.1.1.34 | NA | ||
table · not-accessible · current This Table contains status information about the QAM dejitter buffers on a per-program basis. Entries in this table only persist for the life-time of the active programs, and are created & deleted on the fly as programs are shutdown & restarted. The counters are reset when the program is shutdown, or when the jitter-buffer is reset. | ||||
| Rd5VideoQamJitterStatusEntry | 1.3.6.1.4.1.4115.1.8.1.1.1.34.1 | NA | ||
row · not-accessible · current | ||||
| Cd5QamJitterStatusIfIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.34.1.1 | InterfaceIndex | RO | |
column · InterfaceIndex · read-only · current The ifIndex of the QAM channel associated with this entry. | ||||
| Cd5QamJitterStatusServiceId | 1.3.6.1.4.1.4115.1.8.1.1.1.34.1.2 | D5Program | RO | |
column · D5Program · read-only · current The output program number associated with this entry. | ||||
| Cd5QamJitterStatusCurrStatus | 1.3.6.1.4.1.4115.1.8.1.1.1.34.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current The status of the jitter buffer for this program.
idle - waiting for input TS packets
fillingBuffer - waiting for the dejitter buffer to fill
up for normal operation.
active - operating normally, passing traffic.
underflow - not receiving enough traffic, buffer has
been reset.
overflow - receiving too much traffic, buffer has
been reset.
| ||||
| Cd5QamJitterStatusUnderflowCount | 1.3.6.1.4.1.4115.1.8.1.1.1.34.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Number of times the jitter buffer has underflowed during the lifetime of this program. | ||||
| Cd5QamJitterStatusOverflowCount | 1.3.6.1.4.1.4115.1.8.1.1.1.34.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Number of times the jitter buffer has overflowed during the lifetime of this program. | ||||
| Cd5QamJitterStatusBufferLengthInBytes | 1.3.6.1.4.1.4115.1.8.1.1.1.34.1.6 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of bytes in-use for the jitter buffer of this program. | ||||
| Cd5QamJitterStatusFixedBufferLength | 1.3.6.1.4.1.4115.1.8.1.1.1.34.1.7 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates if the jitter buffer for this program consists of a fixed number of bytes, or if the QAM-FPGA is configured to reallocate memory dynamically as the program-bitrate fluctuates. | ||||
| Cd5QamJitterStatusBufferLengthInMs | 1.3.6.1.4.1.4115.1.8.1.1.1.34.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The size of the jitter buffer for this program in milliseconds. | ||||
| Cd5vQamJitterStatusBitrate | 1.3.6.1.4.1.4115.1.8.1.1.1.34.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The bitate in Kbps, of this Program. This may have a value of 0 if the bitrate is not known. | ||||
| Cd5QamJitterStatusResetQueue | 1.3.6.1.4.1.4115.1.8.1.1.1.34.1.10 | TruthValue | RW | |
column · TruthValue · read-write · current Write a value of TRUE to empty the jitter buffer, (re)initialize the active buffer-length to the configured value in the d5VideoQamJitterTable, and reset the jitter buffer state back to the initial idle state. NOTE: resetting the buffer results in a temporary loss of MPEG output for the affected program since the buffer is wiped and refilled. | ||||
| Cd5QamJitterStatusBufferSizeInBytes | 1.3.6.1.4.1.4115.1.8.1.1.1.34.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The number of bytes allocated for the jitter buffer of this program. | ||||
| Td5VideoQamLogTable | 1.3.6.1.4.1.4115.1.8.1.1.1.40 | NA | ||
table · not-accessible · current The (conceptual) table listing the router's PIM interfaces. IGMP and PIM are enabled on all interfaces listed in this table. | ||||
| Rd5VideoQamLogEntry | 1.3.6.1.4.1.4115.1.8.1.1.1.40.1 | NA | ||
row · not-accessible · current An entry (conceptual row) in the d5QamLogTable. | ||||
| Cd5vQamLogDateTimeIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.40.1.1 | DateAndTime | NA | |
column · DateAndTime · not-accessible · current The Date/Time of event occurance. | ||||
| Cd5vQamLogSubIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.40.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Index used to address QAM event logs which occur at the same time. | ||||
| Cd5vQamLogSlotNum | 1.3.6.1.4.1.4115.1.8.1.1.1.40.1.3 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current QAM card associated with a particular event. | ||||
| Cd5vQamLogPortNum | 1.3.6.1.4.1.4115.1.8.1.1.1.40.1.4 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current QAM card port number associated with a particular event. | ||||
| Cd5vQamLogQamNum | 1.3.6.1.4.1.4115.1.8.1.1.1.40.1.5 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current QAM card QAM number associated with a particular event. | ||||
| Cd5vQamLogState | 1.3.6.1.4.1.4115.1.8.1.1.1.40.1.6 | D5VideoQamLogQamState | RO | |
column · D5VideoQamLogQamState · read-only · current Current state of the Event Log | ||||
| Cd5vQamLogDuration | 1.3.6.1.4.1.4115.1.8.1.1.1.40.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Event Log duration in mSecs (only valid for START/STOP type entries) | ||||
| Cd5vQamLogDescription | 1.3.6.1.4.1.4115.1.8.1.1.1.40.1.8 | DisplayString | RO | |
column · DisplayString · read-only · current QAM event description. | ||||
| Td5VideoRuleQamSiStreamGhostPidFilterTable | 1.3.6.1.4.1.4115.1.8.1.1.1.41 | NA | ||
table · not-accessible · current Table contains list of qam-channel based configured ghost PID rules . Ghost PIDs can only be used for video-si-streams. The reason for this being that it's not reasonable to map multiple copies of the same input PID to a single output PID. Tying ghost-pids to video-si-stream ensures that only one copy of a particular ghost-pid will be mapped to any particular QAM-channel at any one time, since only one video-si-stream can be active on a QAM-channel at a time. | ||||
| Rd5VideoRuleQamSiStreamGhostPidFilterEntry | 1.3.6.1.4.1.4115.1.8.1.1.1.41.1 | NA | ||
row · not-accessible · current
| ||||
| Cd5vRQamSiStreamGhostPidFiltRowStatus | 1.3.6.1.4.1.4115.1.8.1.1.1.41.1.1 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for controlling entries in this table. | ||||
| Cd5vRQamSiStreamGhostPidFiltLastMatchTime | 1.3.6.1.4.1.4115.1.8.1.1.1.41.1.2 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime when this rule was last matched/used at run-time. Zero if not-applicable. | ||||
| Cd5vRQamSiStreamGhostPidFiltMatchCount | 1.3.6.1.4.1.4115.1.8.1.1.1.41.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times this rule was matched/used at run-time. Zero if not-applicable. | ||||
| Cd5vRQamSiStreamGhostPidFiltPersistence | 1.3.6.1.4.1.4115.1.8.1.1.1.41.1.4 | D5PersistenceType | RC | |
column · D5PersistenceType · read-create · current This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. | ||||
| Td5VideoRuleSiStreamGhostPidFilterTable | 1.3.6.1.4.1.4115.1.8.1.1.1.42 | NA | ||
table · not-accessible · current Table contains list of configured ghost PID filter rules. . Ghost PIDs can only be used for video-si-streams. The reason for this being that it's not reasonable to map multiple copies of the same input PID to a single output PID. Tying ghost-pids to video-si-stream ensures that only one copy of a particular ghost-pid will be mapped to any particular QAM-channel at any one time, since only one video-si-stream can be active on a QAM-channel at a time. | ||||
| Rd5VideoRuleSiStreamGhostPidFilterEntry | 1.3.6.1.4.1.4115.1.8.1.1.1.42.1 | NA | ||
row · not-accessible · current | ||||
| Cd5vRSiStreamGhostPidFiltRowStatus | 1.3.6.1.4.1.4115.1.8.1.1.1.42.1.1 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for controlling entries in this table. | ||||
| Cd5vRSiStreamGhostPidFiltLastMatchTime | 1.3.6.1.4.1.4115.1.8.1.1.1.42.1.2 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime when this rule was last matched/used at run-time. Zero if not-applicable. | ||||
| Cd5vRSiStreamGhostPidFiltMatchCount | 1.3.6.1.4.1.4115.1.8.1.1.1.42.1.3 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times this rule was matched/used at run-time. Zero if not-applicable. | ||||
| Cd5vRSiStreamGhostPidFiltPersistence | 1.3.6.1.4.1.4115.1.8.1.1.1.42.1.4 | D5PersistenceType | RC | |
column · D5PersistenceType · read-create · current This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. | ||||
| Td5VideoQamCaDescFiltTable | 1.3.6.1.4.1.4115.1.8.1.1.1.43 | NA | ||
table · not-accessible · current This Table contains a list of rules that regulate the filtering of ca-descriptors from input CAT and PMT tables based on specific ca-system-id values. . | ||||
| Rd5VideoQamCaDescFiltEntry | 1.3.6.1.4.1.4115.1.8.1.1.1.43.1 | NA | ||
row · not-accessible · current | ||||
| Cd5vQamCaDescFiltIfIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.43.1.1 | InterfaceIndexOrZero | RC | |
column · InterfaceIndexOrZero · read-create · current The ifIndex of the QAM channel associated with this rule. (may be set to 0 to indicated an unspecified value) | ||||
| Cd5vQamCaDescFiltSysId | 1.3.6.1.4.1.4115.1.8.1.1.1.43.1.2 | Unsigned32 (0..65535) | RC | |
column · Unsigned32 (0..65535) · read-create · current The CA-system-ID value associated with this rule. | ||||
| Cd5vQamCaDescFiltCaDesc | 1.3.6.1.4.1.4115.1.8.1.1.1.43.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current Controls the filtering of descriptors from the CAT table.
| ||||
| Cd5vQamCaDescFiltRowStatus | 1.3.6.1.4.1.4115.1.8.1.1.1.43.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for controlling entries in this table. | ||||
| Cd5vQamCaDescFiltPersistence | 1.3.6.1.4.1.4115.1.8.1.1.1.43.1.5 | D5PersistenceType | RC | |
column · D5PersistenceType · read-create · current This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. | ||||
| Td5VideoRuleQamStreamGhostPidTable | 1.3.6.1.4.1.4115.1.8.1.1.1.44 | NA | ||
table · not-accessible · current Table contains list of qam-channel based configured ghost PID rules. Ghost PIDs may only be used for video-streams and can be in the range 1 to 8190. Care must be taken not to map multiple copies of the same input PID to a single output PID. | ||||
| Rd5VideoRuleQamStreamGhostPidFilterEntry | 1.3.6.1.4.1.4115.1.8.1.1.1.44.1 | NA | ||
row · not-accessible · current | ||||
| Cd5vRQamStreamGhostPidFiltRowStatus | 1.3.6.1.4.1.4115.1.8.1.1.1.44.1.1 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for controlling entries in this table. | ||||
| Cd5vRQamStreamGhostPidFiltOutPid | 1.3.6.1.4.1.4115.1.8.1.1.1.44.1.2 | D5PID | RC | |
column · D5PID · read-create · current The output PID value related to this rule. | ||||
| Cd5vRQamStreamGhostPidFiltLastMatchTime | 1.3.6.1.4.1.4115.1.8.1.1.1.44.1.3 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime when this rule was last matched/used at run-time. Zero if not-applicable. | ||||
| Cd5vRQamStreamGhostPidFiltMatchCount | 1.3.6.1.4.1.4115.1.8.1.1.1.44.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times this rule was matched/used at run-time. Zero if not-applicable. | ||||
| Cd5vRQamStreamGhostPidFiltPersistence | 1.3.6.1.4.1.4115.1.8.1.1.1.44.1.5 | D5PersistenceType | RC | |
column · D5PersistenceType · read-create · current This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. | ||||
| Td5VideoRuleStreamGhostPidTable | 1.3.6.1.4.1.4115.1.8.1.1.1.45 | NA | ||
table · not-accessible · current Table contains list of configured ghost PID filter rules. Ghost PIDs may only be used for video-streams and can be in the range 1 to 8190. Care must be taken not to map multiple copies of the same input PID to a single output PID. | ||||
| Rd5VideoRuleStreamGhostPidFilterEntry | 1.3.6.1.4.1.4115.1.8.1.1.1.45.1 | NA | ||
row · not-accessible · current | ||||
| Cd5vRStreamGhostPidFiltUdpIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.45.1.1 | Unsigned32 (0..65535) | RC | |
column · Unsigned32 (0..65535) · read-create · current The destination UDP Port of the incoming TS.(A value of 0 in a rule means that the udp-port can be ANY value for pattern-matching) | ||||
| Cd5vRStreamGhostPidFiltIpSrcIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.45.1.2 | IpAddress | RC | |
column · IpAddress · read-create · current The SRC IP address of the incoming TS.(NOTE: a value of '0' here indicates a don't care value for pattern-matching rules) | ||||
| Cd5vRStreamGhostPidFiltIpDestIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.45.1.3 | IpAddress | RC | |
column · IpAddress · read-create · current The DEST IP address of the incoming TS.(NOTE: a value of '0' here indicates a don't care value for pattern-matching rules) | ||||
| Cd5vRStreamGhostPidFiltInPidIndex | 1.3.6.1.4.1.4115.1.8.1.1.1.45.1.4 | D5PID | RC | |
column · D5PID · read-create · current The incoming ghost PID value related to this rule. | ||||
| Cd5vRStreamGhostPidFiltRowStatus | 1.3.6.1.4.1.4115.1.8.1.1.1.45.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current The RowStatus for controlling entries in this table. | ||||
| Cd5vRStreamGhostPidFiltMatchLastTime | 1.3.6.1.4.1.4115.1.8.1.1.1.45.1.6 | TimeStamp | RO | |
column · TimeStamp · read-only · current The value of sysUpTime when this rule was last matched/used at run-time. Zero if not-applicable. | ||||
| Cd5vRStreamGhostPidFiltMatchCount | 1.3.6.1.4.1.4115.1.8.1.1.1.45.1.7 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times this rule was matched/used at run-time. Zero if not-applicable. | ||||
| Cd5vRStreamGhostPidFiltPersistence | 1.3.6.1.4.1.4115.1.8.1.1.1.45.1.8 | D5PersistenceType | RC | |
column · D5PersistenceType · read-create · current This is used to toggle the table entry as being volatile or non-volatile. If set to volatile, it is not saved across card resets. | ||||
Textual conventions
D5DescriptorBufferOCTET STRING (SIZE (0..255))A buffer that contains MPEG Descriptor data.
D5DescriptorIndexINTEGER (1..65535)An identifier that uniquely identifies an MPEG Descriptor within a given Program or Elementary Stream.
D5DescriptorTagINTEGER (1..255)A convenient type definition for MPEG Descriptor Tags values.
D5ElementaryStreamTypeINTEGER (1..255)A convenient type definition for MPEG Elementary Stream Type values.
D5GeneratePatINTEGERdisable(2)enable-auto(1)force-nit-entry(3)Defines the controls on the PAT generation: enable-auto Enable the auto-generation of the PAT table disable Disable to local generation of the PAT table force-nit-entry Enable the auto-generation of the PAT table but force the NIT entry (i.e. program_number '0') to the value specified by the 'nit-pid' configuration. This is used for video-si streams, where the egress NIT PID defaults to that specified in the ingress PAT.D5MappingTypeINTEGERdefault(1)dynamic(2)static(3)A convenient type definition for mapping rules. These can be as follows static - configured by the operator to over-ride the default mapping dynamic - allocated by Q5 on the fly and currently in operation default - representing the default rule but not in operation.D5PIDINTEGER (0..8192)A convenient type definition for MPEG PID values.
D5PersistenceTypeINTEGERnonVolatile(0)volatile(1)A convenient type definition that defines whether or not a rule should be saved persistently across system reboots.
D5PidStatusINTEGERactive(1)inactive(3)timingOut(2)A convenient type definition for MPEG PID status states. These can be as follows active - currently passing video traffic timedOut - No video passing currently, in transition from active to inactive states inactive - not passing ANY traffic - used for statically configured PIDsD5PidTypeINTEGERes(1)ghost(3)psi(2)A convenient type definition for PID - whether PSI or ES.
D5ProgStatusINTEGERactive(1)inactive(3)timingOut(2)A convenient type definition for MPEG Program status states. These can be as follows active - currently passing video traffic timedOut - No video passing currently, in transition from active to inactive states inactive - not passing ANY traffic - used for statically configured programsD5ProgTypeINTEGERes(1)psi(2)A convenient type definition for Programs - whether PSI or ES.
D5ProgramUnsigned32A convenient type definition for MPEG Program Number values.
D5RemappingRuleSourceTypeINTEGERdefault(5)nsg(3)passThrough(4)qam(1)udpIp(2)A convenient type definition for the source of rule used to create a dynamic PID/PROG remapping qam - A Qam remap rule was used to create the remapping udpIp - A Udp/IP rule was used to create the remapping nsg - Remapping was made by NSG mode default rules passThrough - Remapping was made by passThrough mode default rules default - Remapping was made by arris mode default rulesD5TransportStreamDirectionINTEGERincoming(1)outgoing(2)A convenient type definition for the direction of a Transport Stream incoming - the Transport Stream is being received by the D5, typically over IP outgoing - the Transport Stream is being generated by the D5 and sent to a QAM.D5TransportStreamIndexINTEGER (1..65535)An identifier that uniquely identifies an MPEG Transport Stream in the D5 MPEG Manager. This could represent an incoming or outgoing TS, or could represent an SPTS or MPTS.
D5TransportStreamStatusINTEGERactive(1)inactive(3)timingOut(2)A convenient type definition for MPEG transport stream status states. These can be as follows active - currently passing video traffic timedOut - No video passing currently, in transition from active to inactive states inactive - not passing ANY traffic - used for statically configured streamsD5VideoChannelContainerNameTypeDisplayString (SIZE (0..16))A unique name that identifies a particular channel-container.
D5VideoDefaultMappingSchemeINTEGERdisabled(1)udpPort(2)udpPortLegacy(3)A convenient type definition for the default-mappings that are supported by the D5. The default-mapping schemes are used to identify which QAM to map an input TS to, where the TS has no static configuration associated with it. udpPortLegacy - The earlier version of the Arris default UDP- port mapping scheme may used to map a TS to an output QAM channel. Each QAM channel has a pre-defined associated range of UDP-ports which map to specific program-numbers on that QAM channel. udpPort - The Arris default UDP-port mapping scheme is used to map a TS to an output QAM channel. Each QAM channel has a pre-defined associated range of UDP- ports which map to specific program-numbers on that QAM channel. disabled - The default mapping schemes are disabled. Only video streams that are statically configured can pass through the D5.D5VideoProgramOverSubscriptionActionINTEGERnone(0)notification(1)recover(2)Defines the status of the log entry: none No action is performed, program monitoring is not enabled. notification An event is logged indicating that the program has exceeded it's bandwidth. recover Action will be taken to recover the bandwidth in questions. Typically the program will be removed.D5VideoQamLogQamStateINTEGERactive(2)complete(3)one-shot(1)Defines the status of the log entry: one-shot Log entry describes a one off event (no START/STOP attributes) active Log entry is currently active. This means that the START event has occured and the STOP event is pending complete Both the START and STOP events for this log entry have fired