ARRIS-D5-SOFTWARE-MGR-MIB
Arris Interactive LLCThis MIB manages the software on the ARRIS EdgeQAM products
snmptranslate -m ARRIS-D5-SOFTWARE-MGR-MIB -Tpsnmpwalk -v2c -c <community> -m ARRIS-D5-SOFTWARE-MGR-MIB <host> 1.3.6.1.4.1.4115.1.8.1.10Imports
| ARRIS-MIB | arrisD5UEQam |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IsoftwareManagerMIB | 1.3.6.1.4.1.4115.1.8.1.10 | |||
identity This MIB manages the software on the ARRIS EdgeQAM products | ||||
| NsmControlGroup | 1.3.6.1.4.1.4115.1.8.1.10.1 | |||
| SsmReloadAction | 1.3.6.1.4.1.4115.1.8.1.10.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Force a reload of the ARRIS product. The command is applied to both WANs when equipped. The load marked as boot in the Software Table will be loaded. nil(1) - Do nothing reloadConfigSave(2) - Saves the current configuration before reloading reloadNoConfigSave(3) - Reloads without saving configuration
| ||||
| SsmConfigFileAction | 1.3.6.1.4.1.4115.1.8.1.10.1.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current Perform various actions on the configuration file, as directed below. nil(1) - Do nothing saveRunningConfig(2) - Copies the running configuration to the startup configuration. eraseStartupConfig(3) - Erases the startup configuration. You may want to do this before a reboot (without config file save) to get a default configured system. uploadStartupConfigToServer(4) - Using the server information in the configFileTransfer group, this will upload the current startup-configuration to the default directory on the server. If you need upload directory control, use the configFileTransfer
| ||||
| NsmSoftwareListGroup | 1.3.6.1.4.1.4115.1.8.1.10.2 | |||
| TsmSoftwareListTable | 1.3.6.1.4.1.4115.1.8.1.10.2.1 | NA | ||
table · not-accessible · current Table of images installed on the flash disk | ||||
| RsmSoftwareListEntry | 1.3.6.1.4.1.4115.1.8.1.10.2.1.1 | NA | ||
| CsmSoftwareEntryIndex | 1.3.6.1.4.1.4115.1.8.1.10.2.1.1.1 | Unsigned32 (1..30) | NA | |
column · Unsigned32 (1..30) · not-accessible · current image index | ||||
| CsmSoftwareEntryFilename | 1.3.6.1.4.1.4115.1.8.1.10.2.1.1.2 | OCTET STRING (SIZE (0..256)) | RO | |
column · OCTET STRING (SIZE (0..256)) · read-only · current Name of the image file | ||||
| CsmSoftwareEntryVersion | 1.3.6.1.4.1.4115.1.8.1.10.2.1.1.3 | OCTET STRING (SIZE (0..32)) | RO | |
column · OCTET STRING (SIZE (0..32)) · read-only · current image version | ||||
| CsmSoftwareEntryDate | 1.3.6.1.4.1.4115.1.8.1.10.2.1.1.4 | DateAndTime | RO | |
column · DateAndTime · read-only · current Date image created | ||||
| CsmSoftwareEntryState | 1.3.6.1.4.1.4115.1.8.1.10.2.1.1.5 | INTEGER | RO | |
column · INTEGER · read-only · current State of the load file. valid means the software load has been properly downloaded and can be loaded onto the system. corrupt means there was a problem tranferring the load and it cannot be loaded onto the system. unknown means that the software load has not yet been validated by the system, and may or may not be valid.
| ||||
| CsmSoftwareEntrySize | 1.3.6.1.4.1.4115.1.8.1.10.2.1.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current file size | ||||
| CsmSoftwareEntryStatus | 1.3.6.1.4.1.4115.1.8.1.10.2.1.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current Status of software may be running-boot, running, boot or inactive running-boot(1) indicates that the load is running AND is the boot load. running(2) means the software is currently running on the box, but is not the boot load. boot(3) means that the selected load will boot on next restart. Confirm by checking ksSMBootFileName. inactive(4) indicates the load is neither running nor set to boot.
| ||||
| CsmSoftwareEntryAction | 1.3.6.1.4.1.4115.1.8.1.10.2.1.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current Perform an action on this software load entry. To make the current software load the boot load, select makeBoot(2). When set to upload(3), this software load will be sent to the server using the settings specified in the softwareDownloadGroup MIB objects. This method cannot specify an upload path on the server for the software load. The load will appear in the default directory on the server for the specified transfer protocol. For control over the upload path, please use the smSoftwareDownloadGroup directly. Selecting delete(4) will delete the load from the system.
| ||||
| NsmConfigFileListGroup | 1.3.6.1.4.1.4115.1.8.1.10.3 | |||
| TsmConfigFileListTable | 1.3.6.1.4.1.4115.1.8.1.10.3.1 | NA | ||
table · not-accessible · current Table of configuration files or scripts on flash disk | ||||
| RsmConfigFileListEntry | 1.3.6.1.4.1.4115.1.8.1.10.3.1.1 | NA | ||
| CsmConfigFileEntryIndex | 1.3.6.1.4.1.4115.1.8.1.10.3.1.1.1 | Unsigned32 (1..30) | NA | |
column · Unsigned32 (1..30) · not-accessible · current image index | ||||
| CsmConfigFileEntryName | 1.3.6.1.4.1.4115.1.8.1.10.3.1.1.2 | OCTET STRING (SIZE (0..256)) | RO | |
column · OCTET STRING (SIZE (0..256)) · read-only · current Name of the file | ||||
| CsmConfigFileTimestamp | 1.3.6.1.4.1.4115.1.8.1.10.3.1.1.3 | DateAndTime | RO | |
column · DateAndTime · read-only · current Timestamp of the configuration file | ||||
| CsmConfigFileEntryAction | 1.3.6.1.4.1.4115.1.8.1.10.3.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Actions to perform on the current configuration file. To make this configuration file the startup configuration file, select makeStartupConfig(2). Be sure not to overwrite the new startup-configuration when reloading the system. To copy the current configuration file into the running configuration, select copyIntoRunningConfig(3). Don't forget to save the new running configuration if necessary. When set to upload(4), this software load will be sent to the server using the settings specified in the smConfigFileDownloadGroup MIB objects. This method cannot specify an upload path on the server for the software load. The load will appear in the default directory on the server for the specified transfer protocol. For control over the upload path, please use the smConfigFileDownloadGroup directly. Finally, to delete the configuration file, select delete(5).
| ||||
| NsmSoftwareTransferGroup | 1.3.6.1.4.1.4115.1.8.1.10.4 | |||
| SsmSoftwareTransferDevice | 1.3.6.1.4.1.4115.1.8.1.10.4.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specify protocol to use for software load transfers
| ||||
| SsmSoftwareTransferHostname | 1.3.6.1.4.1.4115.1.8.1.10.4.2 | OCTET STRING (SIZE (0..256)) | RW | |
scalar · OCTET STRING (SIZE (0..256)) · read-write · current Server ip address or hostname | ||||
| SsmSoftwareTransferUsername | 1.3.6.1.4.1.4115.1.8.1.10.4.3 | OCTET STRING (SIZE (0..32)) | RW | |
scalar · OCTET STRING (SIZE (0..32)) · read-write · current Server user name | ||||
| SsmSoftwareTransferPassword | 1.3.6.1.4.1.4115.1.8.1.10.4.4 | OCTET STRING (SIZE (0..32)) | RW | |
scalar · OCTET STRING (SIZE (0..32)) · read-write · current Server user password | ||||
| SsmSoftwareTransferPath | 1.3.6.1.4.1.4115.1.8.1.10.4.5 | OCTET STRING (SIZE (0..256)) | RW | |
scalar · OCTET STRING (SIZE (0..256)) · read-write · current Path and filename for image file on tftp, ftp or nfs | ||||
| SsmSoftwareTransferControl | 1.3.6.1.4.1.4115.1.8.1.10.4.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current Control the transfer as follows:
abort(1) - Will abort the transfer in progress.
download(2) - Starts a transfer to the ARRIS device
upload(3) - Transfer specified load to the server
downloadAsBoot(4) will download the software image to the
ARRIS device and make it the next boot image
| ||||
| SsmSoftwareTransferStatus | 1.3.6.1.4.1.4115.1.8.1.10.4.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current Indication of the last transfer attempt as follows: none(1) indicates no images have been transferred since the system rebooted. inprogress(2) - Indicates there is an active transfer occurring. finished(3) - Indicates the transfer is complete. filenameError(4) - Indicates there was a problem with either the path and/or filename, or the wrong server was specified and the file was not found. hostnameError(5) - Indicates a problem where the hostname could not be resolved, or an incorrectly formatted IP address was specified.
| ||||
| NsmConfigFileTransferGroup | 1.3.6.1.4.1.4115.1.8.1.10.5 | |||
| SsmConfigFileTransferDevice | 1.3.6.1.4.1.4115.1.8.1.10.5.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current Specify protocol to use for file transfers
| ||||
| SsmConfigFileTransferHostname | 1.3.6.1.4.1.4115.1.8.1.10.5.2 | OCTET STRING (SIZE (0..256)) | RW | |
scalar · OCTET STRING (SIZE (0..256)) · read-write · current Server ip address or hostname | ||||
| SsmConfigFileTransferUsername | 1.3.6.1.4.1.4115.1.8.1.10.5.3 | OCTET STRING (SIZE (0..32)) | RW | |
scalar · OCTET STRING (SIZE (0..32)) · read-write · current Server user name | ||||
| SsmConfigFileTransferPassword | 1.3.6.1.4.1.4115.1.8.1.10.5.4 | OCTET STRING (SIZE (0..32)) | RW | |
scalar · OCTET STRING (SIZE (0..32)) · read-write · current Server user password | ||||
| SsmConfigFileTransferPath | 1.3.6.1.4.1.4115.1.8.1.10.5.5 | OCTET STRING (SIZE (0..256)) | RW | |
scalar · OCTET STRING (SIZE (0..256)) · read-write · current Path and filename of the configuration file on the source device. | ||||
| SsmConfigFileTransferTargetPath | 1.3.6.1.4.1.4115.1.8.1.10.5.6 | OCTET STRING (SIZE (0..256)) | RW | |
scalar · OCTET STRING (SIZE (0..256)) · read-write · current Path and filename of the configuration file on the target device. | ||||
| SsmConfigFileTransferControl | 1.3.6.1.4.1.4115.1.8.1.10.5.7 | INTEGER | RW | |
scalar · INTEGER · read-write · current Control the transfer as follows:
abort(1) - Will abort the transfer in progress.
download(2) - Starts a transfer to the ARRIS device
upload(3) - Transfer specified file to the server
downloadAsStartup(4) Transfer the config file and make it the
startup configuration
| ||||
| SsmConfigFileTransferStatus | 1.3.6.1.4.1.4115.1.8.1.10.5.8 | INTEGER | RO | |
scalar · INTEGER · read-only · current Indication of the last transfer attempt as follows: none(1) indicates no files have been transferred since the system rebooted. inprogress(2) - Indicates there is an active transfer occurring. finished(3) - Indicates the transfer is complete. filenameError(4) - Indicates there was a problem with either the path and/or filename, or the wrong server was specified and the file was not found. hostnameError(5) - Indicates a problem where the hostname could not be resolved, or an incorrectly formatted IP address was specified.
| ||||