DSR4410MD-MIB
General InstrumentThe managed objects for the dsr mib.
snmptranslate -m DSR4410MD-MIB -Tpsnmpwalk -v2c -c <community> -m DSR4410MD-MIB <host> 1.3.6.1.4.1.1166.1.621Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Norg | 1.3 | ||||||||||||
| Ndod | 1.3.6 | ||||||||||||
| Ninternet | 1.3.6.1 | ||||||||||||
| Nprivate | 1.3.6.1.4 | ||||||||||||
| Nenterprises | 1.3.6.1.4.1 | ||||||||||||
| NgiMIB | 1.3.6.1.4.1.1166 | ||||||||||||
| Ngiproducts | 1.3.6.1.4.1.1166.1 | ||||||||||||
| Idsr | 1.3.6.1.4.1.1166.1.621 | ||||||||||||
identity The managed objects for the dsr mib. | |||||||||||||
| NvideoMib | 1.3.6.1.4.1.1166.1.621.1 | ||||||||||||
| SvideoOutput525Lines | 1.3.6.1.4.1.1166.1.621.1.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The format of the output video that the unit renders when the unit is tuned to a 525 line video broadcast signal.
| |||||||||||||
| SvideoOutput625Lines | 1.3.6.1.4.1.1166.1.621.1.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The format of the output video that the unit renders when the unit is tuned to a 625 line video broadcast signal.
| |||||||||||||
| SaspectRatioInput | 1.3.6.1.4.1.1166.1.621.1.3 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The aspect ratio of the video that is carried in the broadcast signal.
| |||||||||||||
| SaspectRatioOutput | 1.3.6.1.4.1.1166.1.621.1.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The aspect ratio of the output video signal.
| |||||||||||||
| NrfPortsMib | 1.3.6.1.4.1.1166.1.621.2 | ||||||||||||
| NrfPortsSetup | 1.3.6.1.4.1.1166.1.621.2.1 | ||||||||||||
| Nport1 | 1.3.6.1.4.1.1166.1.621.2.1.1 | ||||||||||||
| Sport1SetupMode | 1.3.6.1.4.1.1166.1.621.2.1.1.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current When the setup mode is set to manual the satellite name and polarity has to befined by the user. When the port mode is set to auto the Satellite name and polarity will be automatically set during the first channel change.
| |||||||||||||
| Sport1Satellite | 1.3.6.1.4.1.1166.1.621.2.1.1.2 | OCTET STRING (SIZE (2..3)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (2..3)) · read-write · current A 2 to 3 character abbreviation of the name of the satellite to which the RF port is associated. | |||||||||||||
| Sport1Polarity | 1.3.6.1.4.1.1166.1.621.2.1.1.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The polarity of the RF input applied to the RF port. The undefined value is not writeable; instead, undefined can only be set by the uplink.
| |||||||||||||
| Nport2 | 1.3.6.1.4.1.1166.1.621.2.1.2 | ||||||||||||
| Sport2SetupMode | 1.3.6.1.4.1.1166.1.621.2.1.2.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current When the setup mode is set to manual the satellite name and polarity has to befined by the user. When the port mode is set to auto the Satellite name and polarity will be automatically set during the first channel change.
| |||||||||||||
| Sport2Satellite | 1.3.6.1.4.1.1166.1.621.2.1.2.2 | OCTET STRING (SIZE (2..3)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (2..3)) · read-write · current A 2 to 3 character abbreviation of the name of the satellite to which the RF port is associated. | |||||||||||||
| Sport2Polarity | 1.3.6.1.4.1.1166.1.621.2.1.2.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The polarity of the RF input applied to the RF port. The undefined value is not writeable; instead, undefined can only be set by the uplink.
| |||||||||||||
| NmanualTune | 1.3.6.1.4.1.1166.1.621.2.2 | ||||||||||||
| SactivePort | 1.3.6.1.4.1.1166.1.621.2.2.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The RF port that is active during a manual tune.
| |||||||||||||
| Smode | 1.3.6.1.4.1.1166.1.621.2.2.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The frequency plan of the satellite to which the unit tunes during installation. The unit accepts a C-Band satellite transponder number when the selection is xpndr. The unit accepts a discrete frequency value when the selection is lfreq
| |||||||||||||
| StransponderNumber | 1.3.6.1.4.1.1166.1.621.2.2.3 | INTEGER (1..24) | RW | ||||||||||
scalar · INTEGER (1..24) · read-write · current The transponder number to which the unit tunes during installation This in turn specifies the L-Band frequency to which the unit tunes during installation. This value is valid only when the FrequencyPlan selection is xpndr. Value -1 indicates its Not applicable. | |||||||||||||
| Sfrequency | 1.3.6.1.4.1.1166.1.621.2.2.4 | INTEGER (950..2150) | RW | ||||||||||
scalar · INTEGER (950..2150) · read-write · current The L-band frequency, in MHz, during a manual tune. A new manual tune is initiated when this object is set.This value is valid only of the Frequency Plan selection is lfreq. Value -1 indicates its Not applicable. | |||||||||||||
| SdvbSymbolRate | 1.3.6.1.4.1.1166.1.621.2.2.5 | INTEGER (0..99999999) | RW | ||||||||||
scalar · INTEGER (0..99999999) · read-write · current The symbol-rate to be tuned to in units of sps. A new manual tune is initiated when this object is set. Value -1 indicates its Not applicable. | |||||||||||||
| SdvbCodeRate | 1.3.6.1.4.1.1166.1.621.2.2.6 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The code rate of the channel being tuned to. A new manual tune is initiated when this object is set. Value -1 indicates its Not applicable.
| |||||||||||||
| SsymbolCodeBit | 1.3.6.1.4.1.1166.1.621.2.2.8 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The symbol, code rate, and bitstream select combination during a manual tune. A new manual tune is initiated when this object is set. The symbol rate takes eight possible values: 29.3, 19.5, 14.6, 11.7, 9.76, 7.32, 4.88, and 3.25 Msps. The code rate also takes eight possible values: 7/8, 5/6, 4/5, 3/4, 2/3, 3/5, 1/2, and 5/11. The bitstream select takes two possible values: combined and split. Value -1 indicates its Not applicable.
| |||||||||||||
| SmodulationMode | 1.3.6.1.4.1.1166.1.621.2.2.9 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The modulation mode to be used for the manual tune. A new manual tune is initiated when this object is set.
| |||||||||||||
| Spsk8SymbolRate | 1.3.6.1.4.1.1166.1.621.2.2.10 | INTEGER (1000000..30000000) | RW | ||||||||||
scalar · INTEGER (1000000..30000000) · read-write · current The symbol-rate to be tuned to in units of sps. A new manual tune is initiated when this object is set. Value -1 indicates its Not applicable. | |||||||||||||
| Spsk8CodeRate | 1.3.6.1.4.1.1166.1.621.2.2.11 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The code rate of the channel being tuned to. A new manual tune is initiated when this object is set. Value -1 indicates its Not applicable.
| |||||||||||||
| SdvbS2symbolRate | 1.3.6.1.4.1.1166.1.621.2.2.12 | INTEGER (1000000..33000000) | RW | ||||||||||
scalar · INTEGER (1000000..33000000) · read-write · current The symbol-rate to be tuned to in units of sps. A new manual tune is initiated when this object is set. Value -1 indicates its Not applicable. | |||||||||||||
| SdvbS2codeRate | 1.3.6.1.4.1.1166.1.621.2.2.13 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The code rate of the channel being tuned to. A new manual tune is initiated when this object is set. Value -1 indicates its Not applicable.
| |||||||||||||
| NchannelMib | 1.3.6.1.4.1.1166.1.621.3 | ||||||||||||
| NchannelSelect | 1.3.6.1.4.1.1166.1.621.3.1 | ||||||||||||
| SvctID | 1.3.6.1.4.1.1166.1.621.3.1.1 | INTEGER (0..65535) | RW | ||||||||||
scalar · INTEGER (0..65535) · read-write · current The virtual channel table number. | |||||||||||||
| SchannelNumber | 1.3.6.1.4.1.1166.1.621.3.1.2 | INTEGER (0..4095) | RW | ||||||||||
scalar · INTEGER (0..4095) · read-write · current The virtual channel. | |||||||||||||
| NchannelStatus | 1.3.6.1.4.1.1166.1.621.3.2 | ||||||||||||
| Stransponder | 1.3.6.1.4.1.1166.1.621.3.2.1 | OCTET STRING (SIZE (0..31)) | RO | ||||||||||
scalar · OCTET STRING (SIZE (0..31)) · read-only · current The current transponder name (alpha/numeric) as received from the uplink.A Blank string is returned if the name is not available . | |||||||||||||
| Ssource | 1.3.6.1.4.1.1166.1.621.3.2.2 | OCTET STRING (SIZE (0..255)) | RO | ||||||||||
scalar · OCTET STRING (SIZE (0..255)) · read-only · current The name of the current source signal as received from the uplink.A Blank string is returned if the name is not available . | |||||||||||||
| SsatelliteStatus | 1.3.6.1.4.1.1166.1.621.3.2.3 | OCTET STRING (SIZE (0..15)) | RO | ||||||||||
scalar · OCTET STRING (SIZE (0..15)) · read-only · current The name of the current satellite as received from the uplink. A Blank string is returned if the name is not available . | |||||||||||||
| NserviceSelectionMib | 1.3.6.1.4.1.1166.1.621.4 | ||||||||||||
| SmpegServiceNumber | 1.3.6.1.4.1.1166.1.621.4.1 | INTEGER (0..65535) | RW | ||||||||||
scalar · INTEGER (0..65535) · read-write · current The MPEG service number which the IRD has to play. | |||||||||||||
| NunitControlMib | 1.3.6.1.4.1.1166.1.621.5 | ||||||||||||
| NunitControl | 1.3.6.1.4.1.1166.1.621.5.1 | ||||||||||||
| Scontrast | 1.3.6.1.4.1.1166.1.621.5.1.1 | INTEGER (0..30) | RW | ||||||||||
scalar · INTEGER (0..30) · read-write · current The LCD contrast, with 0 representing the least contrast and 30 representing the most. | |||||||||||||
| SasiEnable | 1.3.6.1.4.1.1166.1.621.5.1.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Option to enable or disbale the ASI output. Note that lock-off is a read only value used by the uplink to lock asiEnable. It cannot be set via SNMP. Also, when this value is lock-off, this entire field is read only.
| |||||||||||||
| SlnbPower | 1.3.6.1.4.1.1166.1.621.5.1.6 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Option to enable or disable LNB Power.
| |||||||||||||
| SresetIRD | 1.3.6.1.4.1.1166.1.621.5.1.7 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Option to reboot the box.
| |||||||||||||
| SformatRate | 1.3.6.1.4.1.1166.1.621.5.1.8 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Format and rate of the ASI output
| |||||||||||||
| NaudioMib | 1.3.6.1.4.1.1166.1.621.6 | ||||||||||||
| NaudioConfig | 1.3.6.1.4.1.1166.1.621.6.1 | ||||||||||||
| Naudio1Config | 1.3.6.1.4.1.1166.1.621.6.1.1 | ||||||||||||
| Saudio1GainControl | 1.3.6.1.4.1.1166.1.621.6.1.1.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current In audio gain control joint, only the left audio channel is edited. The right audio channel gain will be set to the left.
| |||||||||||||
| Saudio1LeftGain | 1.3.6.1.4.1.1166.1.621.6.1.1.2 | INTEGER (-20..0) | RW | ||||||||||
scalar · INTEGER (-20..0) · read-write · current The left audio signal output level from -20 dB to 0 dB, in 1 dB increments. | |||||||||||||
| Saudio1RightGain | 1.3.6.1.4.1.1166.1.621.6.1.1.3 | INTEGER (-20..0) | RO | ||||||||||
scalar · INTEGER (-20..0) · read-only · current The right audio signal output level from -20 dB to 0 dB, in 1 dB increments. | |||||||||||||
| Saudio1DiagNorm | 1.3.6.1.4.1.1166.1.621.6.1.1.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This varaiables enables and diables the audio dialog normalization
| |||||||||||||
| Saudio1DownMix | 1.3.6.1.4.1.1166.1.621.6.1.1.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The mode of the audio output. The unit downmixes the input audio to the selected channel mode.
| |||||||||||||
| Saudio1Compression | 1.3.6.1.4.1.1166.1.621.6.1.1.6 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The degree of audio level compression.
| |||||||||||||
| Naudio2Config | 1.3.6.1.4.1.1166.1.621.6.1.2 | ||||||||||||
| Saudio2GainControl | 1.3.6.1.4.1.1166.1.621.6.1.2.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current In audio gain control joint, only the left audio channel is edited. The right audio channel gain will be set to the left.
| |||||||||||||
| Saudio2LeftGain | 1.3.6.1.4.1.1166.1.621.6.1.2.2 | INTEGER (-20..0) | RW | ||||||||||
scalar · INTEGER (-20..0) · read-write · current The left audio signal output level from -20 dB to 0 dB, in 1 dB increments. | |||||||||||||
| Saudio2RightGain | 1.3.6.1.4.1.1166.1.621.6.1.2.3 | INTEGER (-20..0) | RO | ||||||||||
scalar · INTEGER (-20..0) · read-only · current The right audio signal output level from -20 dB to 0 dB, in 1 dB increments. | |||||||||||||
| Saudio2DiagNorm | 1.3.6.1.4.1.1166.1.621.6.1.2.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This varaiables enables and diables the audio dialog normalization
| |||||||||||||
| Saudio2DownMix | 1.3.6.1.4.1.1166.1.621.6.1.2.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The mode of the audio output. The unit downmixes the input audio to the selected channel mode .
| |||||||||||||
| Saudio2Compression | 1.3.6.1.4.1.1166.1.621.6.1.2.6 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The degree of audio level compression.
| |||||||||||||
| NaudioOutput | 1.3.6.1.4.1.1166.1.621.6.2 | ||||||||||||
| Naudio1Output | 1.3.6.1.4.1.1166.1.621.6.2.1 | ||||||||||||
| Saudio1LeftLanguage | 1.3.6.1.4.1.1166.1.621.6.2.1.1 | OCTET STRING (SIZE (3 | 5)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (3 | 5)) · read-write · current The language for the audio1 . This 5-character language string is formatted as three letters followed by two numbers. The 2-digit number represents the order of the 3-letter language in the service, e.g., eng01 denotes the second English component that is carried in the active service. The unit processes the default language when the preferred language setting is def (In this case the string is only 3 character wide). Note that the language string is converted to lower case automatically when this configuration is to be applied | |||||||||||||
| Saudio1RightLanguage | 1.3.6.1.4.1.1166.1.621.6.2.1.2 | OCTET STRING (SIZE (3 | 5)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (3 | 5)) · read-write · current The language for the right audio channel when the AudioDownMix selection is dualMono. When the AudioDownMix is not dualMono the value mirrors the audio1LeftLanguage and any changes to this value does not have any effect. This is a 3(def) or 5(e.g., eng01) character string similar to the left language string. Note that the language string is converted to lower case automatically when this configuration is to be applied | |||||||||||||
| Saudio1LeftLanguageStatus | 1.3.6.1.4.1.1166.1.621.6.2.1.3 | OCTET STRING (SIZE (3 | 5)) | RO | ||||||||||
scalar · OCTET STRING (SIZE (3 | 5)) · read-only · current The language of the left audio channel being presented by the IRD. This is a 3(def) or 5(e.g., eng01) character string of the similar format as of the audio1LeftLanguage. | |||||||||||||
| Saudio1RightLanguageStatus | 1.3.6.1.4.1.1166.1.621.6.2.1.4 | OCTET STRING (SIZE (3 | 5)) | RO | ||||||||||
scalar · OCTET STRING (SIZE (3 | 5)) · read-only · current The language of the right audio channel being presented by the IRD. This is a 3(def) or 5(e.g., eng01) character string of the similar format as of the audio1LeftLanguage. Note that the language string is converted to lower case automatically when this configuration is to be applied | |||||||||||||
| Naudio2Output | 1.3.6.1.4.1.1166.1.621.6.2.2 | ||||||||||||
| Saudio2LeftLanguage | 1.3.6.1.4.1.1166.1.621.6.2.2.1 | OCTET STRING (SIZE (3 | 5)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (3 | 5)) · read-write · current The language for the audio1 . This 5-character language string is formatted as three letters followed by two numbers. The 2-digit number represents the order of the 3-letter language in the service, e.g., eng01 denotes the second English component that is carried in the active service. The unit processes the default language when the preferred language setting is def(in this case. string is 3 letters wide). Note that the language string is converted to lower case automatically when this configuration is to be applied | |||||||||||||
| Saudio2RightLanguage | 1.3.6.1.4.1.1166.1.621.6.2.2.2 | OCTET STRING (SIZE (3 | 5)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (3 | 5)) · read-write · current The language for the right audio channel when the AudioDownMix selection is dualMono. When the AudioDownMix is not dualMono the value mirrors the audio2LeftLanguage and any changes to this value does not have any effect. This is a 3(def) or 5(e.g., eng01) character string of the similar format as of the audio2LeftLanguage. Note that the language string is converted to lower case automatically when this configuration is to be applied | |||||||||||||
| Saudio2LeftLanguageStatus | 1.3.6.1.4.1.1166.1.621.6.2.2.3 | OCTET STRING (SIZE (3 | 5)) | RO | ||||||||||
scalar · OCTET STRING (SIZE (3 | 5)) · read-only · current The language of the left audio channel being presented by the IRD. This is a 3(def) or 5(e.g., eng01) character string of the similar format as of the audio2LeftLanguage. Note that the language string is converted to lower case automatically when this configuration is to be applied | |||||||||||||
| Saudio2RightLanguageStatus | 1.3.6.1.4.1.1166.1.621.6.2.2.4 | OCTET STRING (SIZE (3 | 5)) | RO | ||||||||||
scalar · OCTET STRING (SIZE (3 | 5)) · read-only · current The language of the right audio channel being presented by the IRD. This is a 3(def) or 5(e.g., eng01) character string of the similar format as of the audio2LeftLanguage. Note that the language string is converted to lower case automatically when this configuration is to be applied | |||||||||||||
| NdataMib | 1.3.6.1.4.1.1166.1.621.7 | ||||||||||||
| NdataStatus | 1.3.6.1.4.1.1166.1.621.7.1 | ||||||||||||
| SethernetIP | 1.3.6.1.4.1.1166.1.621.7.1.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Retrieves whether the select channel contains IP data, as defined in the downloaded network data from the uplink.
| |||||||||||||
| NtextSetup | 1.3.6.1.4.1.1166.1.621.7.2 | ||||||||||||
| SsubtitleLanguage | 1.3.6.1.4.1.1166.1.621.7.2.1 | OCTET STRING (SIZE (1..5)) | RW | ||||||||||
scalar · OCTET STRING (SIZE (1..5)) · read-write · current The selected subtitle track. Applicable when the selected
channel carries multiple subtitle tracks. The 5-character
string has the following representation:
sssdd where
sss = 3-char ISO 639 code for the subtitle language
dd = 2-digits indicating the occurrence of the
specified language
'ENG02' would select, for example, the subtitle track for
the second occurrence of English subtitles.
To turn the subtitle off, enter 'Off01' or 'Off00' at the
browser. The user must enter the ordinal. | |||||||||||||
| SsubtitleLanguageStatus | 1.3.6.1.4.1.1166.1.621.7.2.2 | OCTET STRING (SIZE (1..5)) | RO | ||||||||||
scalar · OCTET STRING (SIZE (1..5)) · read-only · current The subtitle language currently being presented by the IRD | |||||||||||||
| SsubtitleDisplay | 1.3.6.1.4.1.1166.1.621.7.2.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The subtitle language currently being presented by the IRD
| |||||||||||||
| Nethernet10-100 | 1.3.6.1.4.1.1166.1.621.7.3 | ||||||||||||
| SipAddress | 1.3.6.1.4.1.1166.1.621.7.3.1 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current The IP address of the snmp port 1, in the common dotted-decimal format. | |||||||||||||
| SsubnetMask | 1.3.6.1.4.1.1166.1.621.7.3.2 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current The subnet mask of the snmp port 1, in the dotted-decimal format. | |||||||||||||
| SdefaultGateway | 1.3.6.1.4.1.1166.1.621.7.3.3 | IpAddress | RO | ||||||||||
scalar · IpAddress · read-only · current The IP address of the gateway that is used by the snmp port 1, in the dotted-decimal format. | |||||||||||||
| SmacAddr | 1.3.6.1.4.1.1166.1.621.7.3.4 | OCTET STRING (SIZE (17)) | RO | ||||||||||
scalar · OCTET STRING (SIZE (17)) · read-only · current The ethernet 1 MAC address in hh:hh:hh:hh:hh:hh format. | |||||||||||||
| NethernetGigE | 1.3.6.1.4.1.1166.1.621.7.4 | ||||||||||||
| SgigEipAddress | 1.3.6.1.4.1.1166.1.621.7.4.1 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP address of the gigE port, in the common dotted-decimal format. | |||||||||||||
| SgigEsubnetMask | 1.3.6.1.4.1.1166.1.621.7.4.2 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The subnet mask of the gigE port, in the dotted-decimal format. | |||||||||||||
| SgigEgateway | 1.3.6.1.4.1.1166.1.621.7.4.3 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP address of the gateway that is used by the gigE port, in the dotted-decimal format. | |||||||||||||
| SgigEmacAddr | 1.3.6.1.4.1.1166.1.621.7.4.4 | OCTET STRING (SIZE (17)) | RO | ||||||||||
scalar · OCTET STRING (SIZE (17)) · read-only · current The gigEthernet MAC address in hh:hh:hh:hh:hh:hh format. | |||||||||||||
| SgigEmode | 1.3.6.1.4.1.1166.1.621.7.4.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The gigEthernet mode is one of the following values MPTS,disabled,TS-DSMCC or DSM-CC.
| |||||||||||||
| SmptsIpAddr | 1.3.6.1.4.1.1166.1.621.7.4.6 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The MPTS IP address of the gigE port in the dotted-decimal format. | |||||||||||||
| SmptsPort | 1.3.6.1.4.1.1166.1.621.7.4.7 | INTEGER (0..65535) | RW | ||||||||||
scalar · INTEGER (0..65535) · read-write · current The port associated with the MPTS IP address. | |||||||||||||
| NextHardwareMib | 1.3.6.1.4.1.1166.1.621.8 | ||||||||||||
| Nalarms | 1.3.6.1.4.1.1166.1.621.8.1 | ||||||||||||
| SalarmTrigger | 1.3.6.1.4.1.1166.1.621.8.1.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The trigger condition for which the alarm is activated. When the alarm is activated the Alarm LED illuminates and the alrm relay indicates an alarm condition. The alarm is activated for any of the following conditions 1. The tuner loses lock when the input is RF 2. The unit is not authorized to access the selected service 3. The unit loses video When Auto is selected the alarm activates for any of these conditions and when Disabled is selected the alarm does not activate for any condition.
| |||||||||||||
| SalarmTest | 1.3.6.1.4.1.1166.1.621.8.1.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current A manual test of the alarm indicators. Setting ON places the unit in the alarm condition.
| |||||||||||||
| NstatusMib | 1.3.6.1.4.1.1166.1.621.9 | ||||||||||||
| NaccessControl | 1.3.6.1.4.1.1166.1.621.9.1 | ||||||||||||
| SunitAddress | 1.3.6.1.4.1.1166.1.621.9.1.1 | OCTET STRING (SIZE (19)) | RO | <private> | |||||||||
scalar · OCTET STRING (SIZE (19)) · read-only · current The unit's electronic address in the following format: ddd-ddddd-ddddd-ddd where d = decimal digit. Example values from LibreNMS test devices
| |||||||||||||
| StvPasscard | 1.3.6.1.4.1.1166.1.621.9.1.2 | OCTET STRING (SIZE (26)) | RO | ||||||||||
scalar · OCTET STRING (SIZE (26)) · read-only · current The electronic address of the TV Pass Card, if present, in the unit address format. When no TV Pass Card is present the value returned is 'Not inserted'. | |||||||||||||
| Nfirmware | 1.3.6.1.4.1.1166.1.621.9.2 | ||||||||||||
| SbootVersion | 1.3.6.1.4.1.1166.1.621.9.2.1 | OCTET STRING (SIZE (6)) | RO | ||||||||||
scalar · OCTET STRING (SIZE (6)) · read-only · current The version of the boot code. | |||||||||||||
| SfpgaVersion | 1.3.6.1.4.1.1166.1.621.9.2.2 | OCTET STRING (SIZE (6)) | RO | ||||||||||
scalar · OCTET STRING (SIZE (6)) · read-only · current The version of the fpga. | |||||||||||||
| SfirmwareVersion | 1.3.6.1.4.1.1166.1.621.9.2.3 | OCTET STRING (SIZE (6)) | RO | 000292 | |||||||||
scalar · OCTET STRING (SIZE (6)) · read-only · current The version of firmware code. Example values from LibreNMS test devices
| |||||||||||||
| SupgradeFirmwareVersion | 1.3.6.1.4.1.1166.1.621.9.2.4 | OCTET STRING (SIZE (6)) | RO | ||||||||||
scalar · OCTET STRING (SIZE (6)) · read-only · current The upgrade version of firmware code. | |||||||||||||
| NdiagnosticMib | 1.3.6.1.4.1.1166.1.621.10 | ||||||||||||
| NscreenDisplay | 1.3.6.1.4.1.1166.1.621.10.1 | ||||||||||||
| SdiagnosticScreen | 1.3.6.1.4.1.1166.1.621.10.1.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The diagnostic screen that is to be presented by the unit on the video output.
| |||||||||||||
| SclearCounters | 1.3.6.1.4.1.1166.1.621.10.1.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Clears the counters in the on-screen diagnostics to zero.
| |||||||||||||
| NtestSignals | 1.3.6.1.4.1.1166.1.621.10.2 | ||||||||||||
| SvideoTestPattern | 1.3.6.1.4.1.1166.1.621.10.2.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The full-field video test pattern that is presented by the unit on the video output.
| |||||||||||||
| Saudio1TestPattern | 1.3.6.1.4.1.1166.1.621.10.2.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The audio test signal that is outputted by the unit for
audio 1. The following options are available:
o 1000 Hz @ +16 dBm (for mono)
o 4040, 3960 Hz @ + 4dBm each (for left and right)
o OFF
| |||||||||||||
| Saudio2TestPattern | 1.3.6.1.4.1.1166.1.621.10.2.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current See the DESCRIPTION for the audio1TestPattern object.
| |||||||||||||
| ScueToneSignal | 1.3.6.1.4.1.1166.1.621.10.2.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The cue tone test signal.The unit generates a cue test tone sequence consisting of 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, *, #, A, B, C, D. The unit repeats the cue test tone sequence when enabled. The unit generates a cue tone test tone sequence with a 50 msec tone and inter-tone duration, a 2 second interval between sequences, and immediate activation. When the users set it to On via SNMP. Cuetones are played continuously.
| |||||||||||||
| Nvits | 1.3.6.1.4.1.1166.1.621.10.3 | ||||||||||||
| Swaveform | 1.3.6.1.4.1.1166.1.621.10.3.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The VITS test pattern that is presented by the unit on the the video output.
| |||||||||||||
| Sfield | 1.3.6.1.4.1.1166.1.621.10.3.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The field on which the VITS test pattern is presented by the unit on the video output. 'n/a' is a read-only value that the unit returns when the waveform object is set to 'transmitted' or 'disabled'.
| |||||||||||||
| Sline | 1.3.6.1.4.1.1166.1.621.10.3.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The line into which the VITS test pattern is presented by the unit on the video output. 'n/a' is a read-only value that the unit returns when the waveform object is set to 'transmitted' or 'disabled'.
| |||||||||||||
| NsignalStatus | 1.3.6.1.4.1.1166.1.621.11 | ||||||||||||
| SacquisitionState | 1.3.6.1.4.1.1166.1.621.11.1 | INTEGER | RO | locked(0) | |||||||||
scalar · INTEGER · read-only · current The acquisition state for the active signal
Example values from LibreNMS test devices
| |||||||||||||
| SauthorizationState | 1.3.6.1.4.1.1166.1.621.11.2 | INTEGER | RO | undefinedChannel(1) | |||||||||
scalar · INTEGER · read-only · current The authorization state for viewing the current signal. This object mirrors the 'Auth State' field in the Fast Facts 1 OSD.
Example values from LibreNMS test devices
| |||||||||||||
| SencryptionMode | 1.3.6.1.4.1.1166.1.621.11.3 | INTEGER | RO | na(4) | |||||||||
scalar · INTEGER · read-only · current The encryption mode of the current signal. This object mirrors the 'Encryption' field in the Fast Facts 1 OSD.
Example values from LibreNMS test devices
| |||||||||||||
| SunitAddr | 1.3.6.1.4.1.1166.1.621.11.4 | OCTET STRING (SIZE (19)) | RO | <private> | |||||||||
scalar · OCTET STRING (SIZE (19)) · read-only · current The unit's electronic address in the following format:
ddd-ddddd-ddddd-ddd where d = decimal digit.
This object mirrors the 'Unit' field in the Fast Facts 1
OSD.Example values from LibreNMS test devices
| |||||||||||||
| SvctIDFast | 1.3.6.1.4.1.1166.1.621.11.5 | INTEGER (0..65535) | RO | 0 | |||||||||
scalar · INTEGER (0..65535) · read-only · current The current virtual channel table number. This object mirrors the 'VCT ID' field in the Fast Facts 1 OSD. Example values from LibreNMS test devices
| |||||||||||||
| SchannelNum | 1.3.6.1.4.1.1166.1.621.11.6 | INTEGER (1..4095) | RO | 0 | |||||||||
scalar · INTEGER (1..4095) · read-only · current The virtual channel number of the current signal. This object mirrors the 'VC #' field in the Fast Facts 1 OSD. Example values from LibreNMS test devices
| |||||||||||||
| SserviceNumber | 1.3.6.1.4.1.1166.1.621.11.7 | INTEGER (1..65535) | RO | 0 | |||||||||
scalar · INTEGER (1..65535) · read-only · current The MPEG-2 service number, as indicated in the virtual channel map, for the current signal. This object mirrors the 'Service #' field in the Fast Facts 1 OSD. Example values from LibreNMS test devices
| |||||||||||||
| SsignalQuality | 1.3.6.1.4.1.1166.1.621.11.8 | INTEGER (0..100) | RO | 88 | |||||||||
scalar · INTEGER (0..100) · read-only · current The RF quality level of the current signal. This object mirrors the 'Signal Quality' field in the Fast Facts 1 OSD. Example values from LibreNMS test devices
| |||||||||||||
| SsignalPower | 1.3.6.1.4.1.1166.1.621.11.9 | INTEGER (-800..0) | RO | -475 | |||||||||
scalar · INTEGER (-800..0) · read-only · current The RF power level of the current signal, and measured in units of 0.1 dBm. For example, '-650' represents -65.0 dBm. Example values from LibreNMS test devices
| |||||||||||||
| SebNo | 1.3.6.1.4.1.1166.1.621.11.10 | INTEGER (-30..150) | RO | 150 | |||||||||
scalar · INTEGER (-30..150) · read-only · current The signal to noise ration, Eb/No, of the current signal,
and measured in units of 0.1 dB. For example,
'-20' represents -2.0 dB
'150' represents +15.0 dB
This object mirrors the 'Eb/No' field in the Fast Facts 1
OSD.Example values from LibreNMS test devices
| |||||||||||||
| SsymbolRate | 1.3.6.1.4.1.1166.1.621.11.11 | INTEGER | RO | unknown(8) | |||||||||
scalar · INTEGER · read-only · current The symbol rate of the current signal. This object mirrors the 'Symbol Rate' field in the Fast Facts 1 OSD.
Example values from LibreNMS test devices
| |||||||||||||
| SfecRate | 1.3.6.1.4.1.1166.1.621.11.12 | INTEGER | RO | cr2-19-8PSK(10) | |||||||||
scalar · INTEGER · read-only · current The FEC rate of the current signal. This object mirrors the 'FEC Rate' field in the Fast Facts 1 OSD.
Example values from LibreNMS test devices
| |||||||||||||
| Sfreq | 1.3.6.1.4.1.1166.1.621.11.13 | INTEGER (950000..2150000) | RO | 1290000 | |||||||||
scalar · INTEGER (950000..2150000) · read-only · current The frequency of the L-band signal, in kHz, that is applied to the antenna connector on the unit's back panel. This object mirrors the 'Frequency' field in the Fast Facts 1 OSD. Example values from LibreNMS test devices
| |||||||||||||
| SsatelliteName | 1.3.6.1.4.1.1166.1.621.11.14 | OCTET STRING (SIZE (1..4)) | RO | | |||||||||
scalar · OCTET STRING (SIZE (1..4)) · read-only · current A 2 to 4 character satellite reference name, as indicated in the virtual channel map, for the current signal. This object mirrors the 'Sat' field in the Fast Facts 1 OSD. Example values from LibreNMS test devices
| |||||||||||||
| SxpndrNumber | 1.3.6.1.4.1.1166.1.621.11.15 | INTEGER (0..63) | RO | 0 | |||||||||
scalar · INTEGER (0..63) · read-only · current The transponder number of the satellite, as indicated in the virtual channel map, for the current signal. A value of zero indicates the first transponder, and so on. This object mirrors the '/Xpndr' field in the Fast Facts 1 OSD. Example values from LibreNMS test devices
| |||||||||||||
| Spolarization | 1.3.6.1.4.1.1166.1.621.11.16 | INTEGER | RO | h(0) | |||||||||
scalar · INTEGER · read-only · current The polarization, as indicated in the virtual channel map, for the current signal. This object mirrors the 'Polarization' field in the Fast Facts 1 OSD.
Example values from LibreNMS test devices
| |||||||||||||
| SmuxStatus | 1.3.6.1.4.1.1166.1.621.11.17 | INTEGER | RO | unknown(2) | |||||||||
scalar · INTEGER · read-only · current The multiplex format of the active L-Band signal
Example values from LibreNMS test devices
| |||||||||||||
| NledStatus | 1.3.6.1.4.1.1166.1.621.12 | ||||||||||||
| SsignalLED | 1.3.6.1.4.1.1166.1.621.12.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The Signal LED is on (illuminated) when the unit recognizes the signal as a DigiCipher II signal. This object mirrors the LED on the front panel
| |||||||||||||
| SauthorizedLED | 1.3.6.1.4.1.1166.1.621.12.2 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The Authorized LED is on (illuminated) when the Signal LED is on and either (1) the programmer has transmitted the access messages to allow the unit to decrypt the signal or (2) the signal has been transmitted in an unencrypted of fixed encrypted mode. This object mirrors the LED on the front panel
| |||||||||||||
| SalarmConditionLED | 1.3.6.1.4.1.1166.1.621.12.3 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The Alarm condition LED is on (illuminated) when the IRD is in alarm state
| |||||||||||||
| SdownloadLED | 1.3.6.1.4.1.1166.1.621.12.8 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The Download LED is on ( illuminated ) when an active download is in progress
| |||||||||||||
| NretuneMonitorMIB | 1.3.6.1.4.1.1166.1.621.13 | ||||||||||||
| SretuneMonitorEnable | 1.3.6.1.4.1.1166.1.621.13.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Enables retune monitoring by the IRD. When read, this leaf provides the actual enable/disable status of the retune monitoring function in the IRD, and not just the last value that was written to this leaf. The IRD resets retuneMsgStatistic and all entries in the retuneMsgTable each time it receives an enable message; toggling enable/disable/enable is not required for this reset.
| |||||||||||||
| SretuneMsgStatistic | 1.3.6.1.4.1.1166.1.621.13.2 | INTEGER (0..65535) | RO | ||||||||||
scalar · INTEGER (0..65535) · read-only · current The total number of new retune messages. This counter is incremented whenever the IRD detects a new retune message, but is not incremented by each instance (duplicate) of a retune message. This counter provides a useful troubleshooting tool for determining whether the IRD is detecting any retune messages. Range = 0x0000 - 0xFFFF. Note: This counter is not incremented for every possible retune message. This counter is only incremented when a retune becomes active. The IRD ignores retune messages in which the activation time is still in the future. The IRD also ignores any retune message if the activation time is further in the past than the current retune for the same virtual network. | |||||||||||||
| SretuneMsgVirtNetworkIDindex | 1.3.6.1.4.1.1166.1.621.13.3 | INTEGER (0..255) | RW | ||||||||||
scalar · INTEGER (0..255) · read-write · current A table of retune messages is indexed by this target virtual network ID. This table does not have entries for each instance (duplicate) of a retune message that the IRD receives because the uplink repeatedly broadcasts instances of each retune message for the duration of the virtual network program. Instead, this table presents select metrics describing the retune message, as described below. Each table entry pertains to the most recent active retune message. A retune message is considered active when the activation time is in the past. The IRD replaces the current retuneMsgEntry when a new retune message is received having an activation time that is in the past but nearer to the present time than is the activation time of the current retuneMsgEntry. The IRD ignores retune messages in which the activation time is in the future. The virtual network ID indicates which retune message is targeted. This leaf serves as the index for the table. Make sure this index is set prior to accessing the following retune message parameters. Range = 1 - 256. | |||||||||||||
| SretuneMsgVCTid | 1.3.6.1.4.1.1166.1.621.13.4 | INTEGER (0..65535) | RO | ||||||||||
scalar · INTEGER (0..65535) · read-only · current The target virtual channel map ID of the most recent active retune message. Range = 0 - 0xFFFF. | |||||||||||||
| SretuneMsgVirtChannel | 1.3.6.1.4.1.1166.1.621.13.5 | INTEGER (0..4095) | RO | ||||||||||
scalar · INTEGER (0..4095) · read-only · current The target virtual channel of the most recent active retune message. Range = 0 - 4095. | |||||||||||||
| SretuneMsgActivationTime | 1.3.6.1.4.1.1166.1.621.13.6 | OCTET STRING (SIZE (1..4)) | RO | ||||||||||
scalar · OCTET STRING (SIZE (1..4)) · read-only · current The activation time of the most recent active retune message. The activation time is a 32-bit count of GPS seconds since January 6, 1980, representing the time at which the retune is scheduled to occur. Past activation times are interpreted as immediate activation. | |||||||||||||
| SretuneMsgCRC | 1.3.6.1.4.1.1166.1.621.13.7 | OCTET STRING (SIZE (1..4)) | RO | ||||||||||
scalar · OCTET STRING (SIZE (1..4)) · read-only · current The 4-byte CRC value of the most recent active retune message. | |||||||||||||
| SretuneMsgCnt | 1.3.6.1.4.1.1166.1.621.13.8 | INTEGER (0..65535) | RO | ||||||||||
scalar · INTEGER (0..65535) · read-only · current The total number of instances that the IRD has received for the most recent active retune message. Range = 0 - 0xFFFF. Note: this counter is incremented when a retune message is received for which the CRC of that retune message matches the CRC of the current retune message (i.e., the value of retuneMsgCRC). | |||||||||||||
| NidentificationGroup | 1.3.6.1.4.1.1166.1.621.14 | ||||||||||||
| SidentMIBVersion | 1.3.6.1.4.1.1166.1.621.14.1 | DisplayString | RO | ||||||||||
scalar · DisplayString · read-only · current The version number of this MIB. | |||||||||||||
| SidentUnitModel | 1.3.6.1.4.1.1166.1.621.14.2 | DisplayString | RO | DSR-4410MD | |||||||||
scalar · DisplayString · read-only · current The unit model of this IRD. Example values from LibreNMS test devices
| |||||||||||||
| NacpMib | 1.3.6.1.4.1.1166.1.621.15 | ||||||||||||
| SacpMode | 1.3.6.1.4.1.1166.1.621.15.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Setup mode for the authorization control processor.
| |||||||||||||
| SacpIndex | 1.3.6.1.4.1.1166.1.621.15.2 | INTEGER (0..63) | RW | ||||||||||
scalar · INTEGER (0..63) · read-write · current Number uniquely identifying the ACP and keystream pair. | |||||||||||||
| SacpProgram | 1.3.6.1.4.1.1166.1.621.15.3 | INTEGER (0..65535) | RW | ||||||||||
scalar · INTEGER (0..65535) · read-write · current The MPEG service number of the program. | |||||||||||||
| SacpUnitAddress | 1.3.6.1.4.1.1166.1.621.15.4 | OCTET STRING (SIZE (15)) | RO | ||||||||||
scalar · OCTET STRING (SIZE (15)) · read-only · current The electronic address of the selected ACP in the following format: ddd-ddddd-ddddd where d = decimal digit. | |||||||||||||
| SacpKeyStream | 1.3.6.1.4.1.1166.1.621.15.5 | INTEGER (0..3) | RO | ||||||||||
scalar · INTEGER (0..3) · read-only · current The selected keystream. | |||||||||||||
| SacpAuthState | 1.3.6.1.4.1.1166.1.621.15.6 | OCTET STRING (SIZE (2)) | RO | ||||||||||
scalar · OCTET STRING (SIZE (2)) · read-only · current This field displays the authorization status of the ACP for the current Service association. AU -- Authorization NA -- Not Authorized The unit presents dashes when no information is available | |||||||||||||
| SacpEncryptMode | 1.3.6.1.4.1.1166.1.621.15.7 | OCTET STRING (SIZE (1..2)) | RO | ||||||||||
scalar · OCTET STRING (SIZE (1..2)) · read-only · current This field displays the Encryption Mode of the service being decrypted by the selected ACP. The different values are FP - Fixed Program Key FW - Fixed Working Key S - Scrambled ZK - Unencrypted The unit presents dashes when no information is available | |||||||||||||
| NtestMib | 1.3.6.1.4.1.1166.1.621.16 | ||||||||||||
| Naudio | 1.3.6.1.4.1.1166.1.621.16.1 | ||||||||||||
| SprimaryAudioLock | 1.3.6.1.4.1.1166.1.621.16.1.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Gives Primary Audio is locked or not
| |||||||||||||
| SsecondaryAudioLock | 1.3.6.1.4.1.1166.1.621.16.1.2 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Gives Secondary Audio is locked or not
| |||||||||||||
| SprimaryAudioPID | 1.3.6.1.4.1.1166.1.621.16.1.4 | INTEGER (0..8191) | RO | ||||||||||
scalar · INTEGER (0..8191) · read-only · current Gives Primary Audio PID | |||||||||||||
| SsecondaryAudioPID | 1.3.6.1.4.1.1166.1.621.16.1.5 | INTEGER (0..8191) | RO | ||||||||||
scalar · INTEGER (0..8191) · read-only · current Gives Secondary Audio PID | |||||||||||||
| Nvideo | 1.3.6.1.4.1.1166.1.621.16.2 | ||||||||||||
| SvideoLock | 1.3.6.1.4.1.1166.1.621.16.2.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Gives Video is locked or not
| |||||||||||||
| SvideoPID | 1.3.6.1.4.1.1166.1.621.16.2.2 | INTEGER (0..8191) | RO | ||||||||||
scalar · INTEGER (0..8191) · read-only · current Gives video PID | |||||||||||||
| NcodeDownload | 1.3.6.1.4.1.1166.1.621.16.3 | ||||||||||||
| ScodeDownloadBit | 1.3.6.1.4.1.1166.1.621.16.3.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Monitor the Code Download process 0 - off 1 - on
| |||||||||||||
| NirdStatus | 1.3.6.1.4.1.1166.1.621.16.4 | ||||||||||||
| NfalseLock | 1.3.6.1.4.1.1166.1.621.16.4.1 | ||||||||||||
| SfalseLockStatus | 1.3.6.1.4.1.1166.1.621.16.4.1.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current Checks for false lock
| |||||||||||||
| NalarmLedStatus | 1.3.6.1.4.1.1166.1.621.16.4.2 | ||||||||||||
| SalarmLEDBlinkStatus | 1.3.6.1.4.1.1166.1.621.16.4.2.1 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current 0 - LED is not blinking(OFF/ON) 1 - LED is blinking
| |||||||||||||
| Nmessages | 1.3.6.1.4.1.1166.1.621.16.5 | ||||||||||||
| SpatMsgCount | 1.3.6.1.4.1.1166.1.621.16.5.1 | INTEGER (0..65535) | RO | ||||||||||
scalar · INTEGER (0..65535) · read-only · current Gives PAT Message Count | |||||||||||||
| ScaMsgCount | 1.3.6.1.4.1.1166.1.621.16.5.2 | INTEGER (0..65535) | RO | ||||||||||
scalar · INTEGER (0..65535) · read-only · current Gives CA Message Count | |||||||||||||
| SpmtMsgCount | 1.3.6.1.4.1.1166.1.621.16.5.3 | INTEGER (0..65535) | RO | ||||||||||
scalar · INTEGER (0..65535) · read-only · current Gives PMT message Count | |||||||||||||
| SniMsgCount | 1.3.6.1.4.1.1166.1.621.16.5.4 | INTEGER (0..65535) | RO | ||||||||||
scalar · INTEGER (0..65535) · read-only · current Gives Network Information Message Count | |||||||||||||
| SnetworkTextMsgCount | 1.3.6.1.4.1.1166.1.621.16.5.5 | INTEGER (0..65535) | RO | ||||||||||
scalar · INTEGER (0..65535) · read-only · current Gives Network text Message Count | |||||||||||||
| SvirtualChannelMsgCount | 1.3.6.1.4.1.1166.1.621.16.5.6 | INTEGER (0..65535) | RO | ||||||||||
scalar · INTEGER (0..65535) · read-only · current Gives Virtual channel message Count | |||||||||||||
| SsubtitleMsgCount | 1.3.6.1.4.1.1166.1.621.16.5.7 | INTEGER (0..65535) | RO | ||||||||||
scalar · INTEGER (0..65535) · read-only · current Gives Subtitle Message Count | |||||||||||||
| ScoMsgCount | 1.3.6.1.4.1.1166.1.621.16.5.8 | INTEGER (0..65535) | RO | ||||||||||
scalar · INTEGER (0..65535) · read-only · current Gives Channel Override Message Count | |||||||||||||
| SdwnldPreMsgCount | 1.3.6.1.4.1.1166.1.621.16.5.9 | INTEGER (0..65535) | RO | ||||||||||
scalar · INTEGER (0..65535) · read-only · current Gives Download preamble message Count | |||||||||||||
| SdwnldMsgCount | 1.3.6.1.4.1.1166.1.621.16.5.10 | INTEGER (0..65535) | RO | ||||||||||
scalar · INTEGER (0..65535) · read-only · current Gives Download Message Count | |||||||||||||
| SemmMsgCount | 1.3.6.1.4.1.1166.1.621.16.5.11 | INTEGER (0..65535) | RO | ||||||||||
scalar · INTEGER (0..65535) · read-only · current Gives EMM Message Count | |||||||||||||
| SfingerPrintMessageCount | 1.3.6.1.4.1.1166.1.621.16.5.12 | INTEGER (0..65535) | RO | ||||||||||
scalar · INTEGER (0..65535) · read-only · current Gives Finger Print message Count | |||||||||||||
| ShcmMsgCount | 1.3.6.1.4.1.1166.1.621.16.5.13 | INTEGER (0..65535) | RO | ||||||||||
scalar · INTEGER (0..65535) · read-only · current Gives hardware control Message Count | |||||||||||||
| SuimMsgCount | 1.3.6.1.4.1.1166.1.621.16.5.14 | INTEGER (0..65535) | RO | ||||||||||
scalar · INTEGER (0..65535) · read-only · current Gives Unit information message Count | |||||||||||||
| SevenBlkoutMsgCount | 1.3.6.1.4.1.1166.1.621.16.5.15 | INTEGER (0..65535) | RO | ||||||||||
scalar · INTEGER (0..65535) · read-only · current Gives Event Blckout Message message Count | |||||||||||||
| Nrf | 1.3.6.1.4.1.1166.1.621.16.6 | ||||||||||||
| SfrequencyOffset | 1.3.6.1.4.1.1166.1.621.16.6.1 | INTEGER (-100..100) | RO | ||||||||||
scalar · INTEGER (-100..100) · read-only · current The acquired offset of the L-band frequency in MHz. | |||||||||||||
| Sber | 1.3.6.1.4.1.1166.1.621.16.6.2 | INTEGER (0..65535) | RO | ||||||||||
scalar · INTEGER (0..65535) · read-only · current This displays Bit Errors. | |||||||||||||
| Sebno | 1.3.6.1.4.1.1166.1.621.16.6.3 | INTEGER (-10..50) | RO | ||||||||||
scalar · INTEGER (-10..50) · read-only · current This displays the Eb/No measured in the IRD. | |||||||||||||
| Srserror | 1.3.6.1.4.1.1166.1.621.16.6.4 | INTEGER (0..65535) | RO | ||||||||||
scalar · INTEGER (0..65535) · read-only · current This displays the Reed Solomon Errors. | |||||||||||||
| Slostlockcount | 1.3.6.1.4.1.1166.1.621.16.6.5 | INTEGER (0..65535) | RO | ||||||||||
scalar · INTEGER (0..65535) · read-only · current This displays the number of times tuner lost lock. | |||||||||||||
| Sclearrserror | 1.3.6.1.4.1.1166.1.621.16.6.6 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Clears the rserror counter to zero.
| |||||||||||||
| Sclearlostlockcount | 1.3.6.1.4.1.1166.1.621.16.6.7 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Clears the lostlockcount counter to zero.
| |||||||||||||
| Ssnr | 1.3.6.1.4.1.1166.1.621.16.6.8 | INTEGER (0..65535) | RO | 182 | |||||||||
scalar · INTEGER (0..65535) · read-only · current This displays the SNR value. Example values from LibreNMS test devices
| |||||||||||||