CADANT-CMTS-EQUIPMENT-MIB
Cadant Inc.This MIB is intended to describe all objects which are used to control and report on the state of an Arris E6 CMTS. These objects are used to perform the following functions on an Arris E6 CMTS: a) provision the cards, ports, and the CMTS itself b) run dianostic tests c) configure auditing parameters d) receive equipment-related traps
snmptranslate -m CADANT-CMTS-EQUIPMENT-MIB -Tpsnmpwalk -v2c -c <community> -m CADANT-CMTS-EQUIPMENT-MIB <host> 1.3.6.1.4.1.4998.1.1.10.1Imports
| CADANT-PRODUCTS-MIB | cadEquipment |
|---|---|
| CADANT-TC | AdminState, CardId, CerCardSubType, CerCardType, CerPicType, CerPortType, DiskVolumeUsageLevel, DuplexStatus, EqActionType, FirmwareSource, FlowControlMode, PicType, PortDetectedMode, PortId, PortMode, PortType, PrimaryState, SecondaryState |
| DOCS-IF-MIB | TenthdBmV |
| IF-MIB | InterfaceIndexOrZero, ifIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IcadEquipmentMib | 1.3.6.1.4.1.4998.1.1.10.1 | |||
identity This MIB is intended to describe all objects which are used to control and report on the state of an Arris E6 CMTS. These objects are used to perform the following functions on an Arris E6 CMTS: a) provision the cards, ports, and the CMTS itself b) run dianostic tests c) configure auditing parameters d) receive equipment-related traps | ||||
| NequipmentTraps | 1.3.6.1.4.1.4998.1.1.10.1.0 | |||
| !cmResetClearNotification | 1.3.6.1.4.1.4998.1.1.10.1.0.15 | |||
notification · current This trap is sent when a CM is on-line from previous flap. | ||||
| !cmResetNotification | 1.3.6.1.4.1.4998.1.1.10.1.0.16 | |||
notification · current This trap is sent when a CM is reset. | ||||
| !cardTempOutOfRangeNotification | 1.3.6.1.4.1.4998.1.1.10.1.0.19 | |||
notification · current This trap is sent when the card temperature is out of range.
| ||||
| !cardTempNoReportNotification | 1.3.6.1.4.1.4998.1.1.10.1.0.20 | |||
notification · current This trap is sent when there is no reporting on card temperature.
| ||||
| !cardTempOverHeatNotification | 1.3.6.1.4.1.4998.1.1.10.1.0.21 | |||
notification · current This trap is sent when the card is overheat, card is being shut down.
| ||||
| !downstreamPowerLoss | 1.3.6.1.4.1.4998.1.1.10.1.0.22 | |||
notification · current This trap is sent when c4 detects the loss of downstream power.
| ||||
| !cmRegistrationNotification | 1.3.6.1.4.1.4998.1.1.10.1.0.23 | |||
notification · current This trap is sent when a CM is registered. | ||||
| !noLicenseNotification | 1.3.6.1.4.1.4998.1.1.10.1.0.24 | |||
notification · current This trap is sent when a channel cannot be activated due to insufficient license level. | ||||
| !cerCardPrStateChange | 1.3.6.1.4.1.4998.1.1.10.1.0.25 | |||
notification · current This trap is sent whenever the card's Primary state changes. | ||||
| !cerCardSecStateChange | 1.3.6.1.4.1.4998.1.1.10.1.0.26 | |||
notification · current This trap is sent whenever the card's Secondary state changes. | ||||
| !cerCardDetectedChange | 1.3.6.1.4.1.4998.1.1.10.1.0.27 | |||
notification · current This trap is sent whenever a new card is detected. | ||||
| !cerCardDplxStatusChange | 1.3.6.1.4.1.4998.1.1.10.1.0.28 | |||
notification · current This trap is sent whenever the card's Duplex status changes. | ||||
| !cerPortPrStateChange | 1.3.6.1.4.1.4998.1.1.10.1.0.29 | |||
notification · current This trap is sent whenever the port's Primary state changes. | ||||
| !cerPortSecStateChange | 1.3.6.1.4.1.4998.1.1.10.1.0.30 | |||
notification · current This trap is sent whenever the port's Secondary state changes. | ||||
| !cerPortDplxStatusChange | 1.3.6.1.4.1.4998.1.1.10.1.0.31 | |||
notification · current This trap is sent whenever the port's Duplex status changes. | ||||
| !cardTestResultNotification | 1.3.6.1.4.1.4998.1.1.10.1.0.33 | |||
notification · current This trap is sent when a test or diagnostic completed on a card. | ||||
| !cerDiskVolumeUsageNotification | 1.3.6.1.4.1.4998.1.1.10.1.0.35 | |||
notification · current This trap is sent when a disk volume usage level exceed a disk usage threshold. | ||||
| !cerDiskVolumeAutoDeleteFileNotification | 1.3.6.1.4.1.4998.1.1.10.1.0.36 | |||
notification · current This trap is sent when a file is automatically deleted by the system in respond to disk volume usage exceed critical thresholh. | ||||
| NcerCamFaultInfo | 1.3.6.1.4.1.4998.1.1.10.1.0.40 | |||
| ScerCamFaultId | 1.3.6.1.4.1.4998.1.1.10.1.0.40.1 | CerCamFaultTrapType | AN | |
scalar · CerCamFaultTrapType · accessible-for-notify · current Type of CAM fault trigging the trap. | ||||
| ScerCamFaultRecovery | 1.3.6.1.4.1.4998.1.1.10.1.0.40.2 | TruthValue | AN | |
scalar · TruthValue · accessible-for-notify · current True if recovery for this event is enabled. | ||||
| ScerCamFaultAutoFailback | 1.3.6.1.4.1.4998.1.1.10.1.0.40.3 | TruthValue | AN | |
scalar · TruthValue · accessible-for-notify · current True if autofailback is enabled and the maximum failbacks have not occurred. | ||||
| ScerCamFaultErrorStr | 1.3.6.1.4.1.4998.1.1.10.1.0.40.4 | DisplayString (SIZE (0..100)) | AN | |
scalar · DisplayString (SIZE (0..100)) · accessible-for-notify · current Extra information about this error. Null string if no extra info. | ||||
| !cerCamFaultNotification | 1.3.6.1.4.1.4998.1.1.10.1.0.41 | |||
notification · current This trap is sent when a CAM has a fault of the specified type, even if fault recovery is inhibited for that fault type. | ||||
| NsystemGeneral | 1.3.6.1.4.1.4998.1.1.10.1.1 | |||
| SsystemClock | 1.3.6.1.4.1.4998.1.1.10.1.1.1 | DateAndTime | AN | |
scalar · DateAndTime · accessible-for-notify · current CMTS local date and time displayed as yyyy-mm-dd,hh:mm:ss.d,+/-hh:mm, where the date is yyyy-mmmm-dd and time in deci-seconds is hh:mm:ss.d, adn teh current offset from GMT is +/-hh:mm. This object is adjusted by teh TZ and DST rules. E.g. 2002-5-26,13;30:15.0,-4:0 | ||||
| StrapCounter | 1.3.6.1.4.1.4998.1.1.10.1.1.2 | Counter32 | RO | |
scalar · Counter32 · read-only · current This is the trap sequence number that increments each time a trap is sent. It is persistent across resets. | ||||
| StrapSeverity | 1.3.6.1.4.1.4998.1.1.10.1.1.3 | INTEGER | RO | |
scalar · INTEGER · read-only · current Severity level of a Cadant trap.
| ||||
| SsystemKey | 1.3.6.1.4.1.4998.1.1.10.1.1.4 | DisplayString | RO | |
scalar · DisplayString · read-only · current The systemKey is a unique string used for Candant's CMTS identification. The EMS uses this key string as well as the sysOid in the MIB-II system group MIB to identify Candant's CMTS's. | ||||
| ScardNumber | 1.3.6.1.4.1.4998.1.1.10.1.1.98 | CardId | AN | |
scalar · CardId · accessible-for-notify · current Card Id used in traps. A value 99 indicates an invalid cardNumber. | ||||
| SportNumber | 1.3.6.1.4.1.4998.1.1.10.1.1.99 | PortId | AN | |
scalar · PortId · accessible-for-notify · current Port Id used in traps. A value of 99 indicates an invalid portNumber. | ||||
| SdiskDriveNumber | 1.3.6.1.4.1.4998.1.1.10.1.1.100 | Integer32 (0..99) | AN | |
scalar · Integer32 (0..99) · accessible-for-notify · current Disk drive ID use in a Cadant trap. A value of 99 indicates an invalid diskDriveNumber | ||||
| SdiskVolumeNumber | 1.3.6.1.4.1.4998.1.1.10.1.1.101 | Integer32 (0..99) | AN | |
scalar · Integer32 (0..99) · accessible-for-notify · current Disk volume ID use in a Cadant trap. A value of 99 indicates an invalid diskVolumeNumber | ||||
| ScerCardNumber | 1.3.6.1.4.1.4998.1.1.10.1.1.200 | CardId | AN | |
scalar · CardId · accessible-for-notify · current Card Id used in traps. A value 0 indicates an invalid cardNumber. | ||||
| ScerPortNumber | 1.3.6.1.4.1.4998.1.1.10.1.1.201 | PortId | AN | |
scalar · PortId · accessible-for-notify · current Port Id used in traps. A value of 0 indicates an invalid portNumber. | ||||
| ScerDiskDriveNumber | 1.3.6.1.4.1.4998.1.1.10.1.1.202 | Integer32 (0..99) | AN | |
scalar · Integer32 (0..99) · accessible-for-notify · current Disk drive ID use in a Cadant trap. A value of 0 indicates an invalid diskDriveNumber | ||||
| ScerDiskVolumeNumber | 1.3.6.1.4.1.4998.1.1.10.1.1.203 | Integer32 (0..99) | AN | |
scalar · Integer32 (0..99) · accessible-for-notify · current Disk volume ID use in a Cadant trap. A value of 0 indicates an invalid diskVolumeNumber | ||||
| NshelfObjects | 1.3.6.1.4.1.4998.1.1.10.1.2 | |||
| SshelfName | 1.3.6.1.4.1.4998.1.1.10.1.2.2 | DisplayString | RW | |
scalar · DisplayString · read-write · current A string that represents the name of this machine and may uniquely identify it from other network devices. | ||||
| SshelfSwVersion | 1.3.6.1.4.1.4998.1.1.10.1.2.3 | DisplayString | RO | |
scalar · DisplayString · read-only · current The software version currently executing. | ||||
| NequipmentState | 1.3.6.1.4.1.4998.1.1.10.1.3 | |||
| ScardLastChangeTime | 1.3.6.1.4.1.4998.1.1.10.1.3.2 | TimeStamp | RO | |
scalar · TimeStamp · read-only · current The value of sysUpTime at the time any of the objects in cardTable last changed. | ||||
| SportLastChangeTime | 1.3.6.1.4.1.4998.1.1.10.1.3.3 | TimeStamp | RO | |
scalar · TimeStamp · read-only · current The value of sysUpTime at the time any of the objects in portTable last changed. | ||||
| NequipmentTbl | 1.3.6.1.4.1.4998.1.1.10.1.4 | |||
| TcerCardTable | 1.3.6.1.4.1.4998.1.1.10.1.4.12 | NA | ||
table · not-accessible · current A table of card or circuit pack information. | ||||
| RcerCardEntry | 1.3.6.1.4.1.4998.1.1.10.1.4.12.1 | NA | ||
row · not-accessible · current A conceptual row containing pertinent information about a card or a circuit pack.
| ||||
| CcerCardId | 1.3.6.1.4.1.4998.1.1.10.1.4.12.1.2 | CardId | AN | |
column · CardId · accessible-for-notify · current The unique id of this card within the shelf. The convention of cardId is as follows: - Indices from 1 to 50 [1 - 50] are reserved for Circuit Packs. In this case, the cardId is 1 plus the 0-based slot number. - Indices from 51 to 98 [51 - 98] are reserved for Auxilliary Devices in within a shelf. Auxilliary Devices or Modules could be Fan Module, Power Module. In this case, the cerCardName and cerCardType indentify the Auxilliary Devices. Not all of row attributes are applicable for Auxilliary Devices. | ||||
| CcerCardName | 1.3.6.1.4.1.4998.1.1.10.1.4.12.1.3 | DisplayString (SIZE (0..64)) | RW | |
column · DisplayString (SIZE (0..64)) · read-write · current This is the name of the card, if it has one. | ||||
| CcerCardType | 1.3.6.1.4.1.4998.1.1.10.1.4.12.1.4 | CerCardType | RO | |
column · CerCardType · read-only · current The type of card, if any. For example Ecard, Fcard, Dcard or Ucard If the slot is empty, the value would be 'empty'. | ||||
| CcerCardSubType | 1.3.6.1.4.1.4998.1.1.10.1.4.12.1.5 | CerCardSubType | RW | |
column · CerCardSubType · read-write · current The cardType alone may not be specific enough to fully describe the type of card that is in this slot. For example, a card type of Dcard might have a more specific type of 1D8U with integrated upconverter. If the card needs no further specificication that the cardType, then the value of cardSubType is 'none'. Not yet implemented. | ||||
| CcerCardAdminState | 1.3.6.1.4.1.4998.1.1.10.1.4.12.1.12 | AdminState | RW | |
column · AdminState · read-write · current This is the administrative state of this card. | ||||
| CcerCardPrState | 1.3.6.1.4.1.4998.1.1.10.1.4.12.1.13 | PrimaryState | RO | |
column · PrimaryState · read-only · current This is the primary state of this card. | ||||
| CcerCardSecState | 1.3.6.1.4.1.4998.1.1.10.1.4.12.1.14 | SecondaryState | RO | |
column · SecondaryState · read-only · current This is the secondary state of this card. | ||||
| CcerCardDplxStatus | 1.3.6.1.4.1.4998.1.1.10.1.4.12.1.15 | DuplexStatus | RO | |
column · DuplexStatus · read-only · current This is the duplexing status of this card. | ||||
| CcerCardAction | 1.3.6.1.4.1.4998.1.1.10.1.4.12.1.17 | EqActionType | RW | |
column · EqActionType · read-write · current Write-only action performed on this card. | ||||
| CcerCardTrapInh | 1.3.6.1.4.1.4998.1.1.10.1.4.12.1.18 | Bits | RW | |
column · Bits · read-write · current If a bit is set, the corresponding state change trap will not be sent.
| ||||
| CcerCardNumPorts | 1.3.6.1.4.1.4998.1.1.10.1.4.12.1.19 | Integer32 (0..1000) | RO | |
column · Integer32 (0..1000) · read-only · current Number of ports this card contains. | ||||
| CcerCardDetected | 1.3.6.1.4.1.4998.1.1.10.1.4.12.1.20 | CerCardType | RO | |
column · CerCardType · read-only · current CardType dectected automatically by the CMTS. | ||||
| CcerCardSubDetected | 1.3.6.1.4.1.4998.1.1.10.1.4.12.1.21 | CerCardSubType | RO | |
column · CerCardSubType · read-only · current CardSubType dectected automatically by the CMTS. | ||||
| CcerCardFwUpdateStatus | 1.3.6.1.4.1.4998.1.1.10.1.4.12.1.23 | TruthValue | RO | |
column · TruthValue · read-only · current Set to TRUE if a firmware update is in progress or has been done, else set to FALSE. | ||||
| CcerCardSpareGroupId | 1.3.6.1.4.1.4998.1.1.10.1.4.12.1.24 | CardId | RW | |
column · CardId · read-write · current The cardId of the spare group leader for this sparing group. This value will be set to the invalid card id for all cards not associated with a sparing group. | ||||
| CcerCardSpareGroupMode | 1.3.6.1.4.1.4998.1.1.10.1.4.12.1.25 | INTEGER | RW | |
column · INTEGER · read-write · current The admin mode of the spare group leader for this sparing group. This value will be set to the invalid card id for all cards not associated with a sparing group.
| ||||
| CcerCardUpTime | 1.3.6.1.4.1.4998.1.1.10.1.4.12.1.26 | TimeTicks | RO | |
column · TimeTicks · read-only · current The value of sysUpTime when the primary state for this card made a transition from OOS to IS. | ||||
| CcerCardTemperature | 1.3.6.1.4.1.4998.1.1.10.1.4.12.1.29 | Integer32 (1..10 | 999) | RO | |
column · Integer32 (1..10 | 999) · read-only · current The current relative temperature of the card. (1=coolest, 10=hottest) | ||||
| CcerCardPicDetected | 1.3.6.1.4.1.4998.1.1.10.1.4.12.1.40 | CerPicType | RO | |
column · CerPicType · read-only · current The type of PIC detected in this slot. | ||||
| CcerCardLastResetReason | 1.3.6.1.4.1.4998.1.1.10.1.4.12.1.43 | DisplayString (SIZE (0..64)) | RO | |
column · DisplayString (SIZE (0..64)) · read-only · current The reason for the latest card recovery. | ||||
| CcerCardTemperatureHighWarn | 1.3.6.1.4.1.4998.1.1.10.1.4.12.1.44 | Integer32 | RW | |
column · Integer32 · read-write · current The relative temperature of the card at which warnings are generated. | ||||
| CcerCardTemperatureHighError | 1.3.6.1.4.1.4998.1.1.10.1.4.12.1.45 | Integer32 | RW | |
column · Integer32 · read-write · current The relative temperature of the card at which recoveries are initiated. | ||||
| CcerCardAnnex | 1.3.6.1.4.1.4998.1.1.10.1.4.12.1.46 | INTEGER | RO | |
column · INTEGER · read-only · current The annex of the downstream channels associated with the card.
| ||||
| CcerCardNumRfConnectors | 1.3.6.1.4.1.4998.1.1.10.1.4.12.1.47 | Integer32 (0..48) | RO | |
column · Integer32 (0..48) · read-only · current Number of RF ports this card contains. | ||||
| TcerPortTable | 1.3.6.1.4.1.4998.1.1.10.1.4.13 | NA | ||
table · not-accessible · current A table of Port information. | ||||
| RcerPortEntry | 1.3.6.1.4.1.4998.1.1.10.1.4.13.1 | NA | ||
row · not-accessible · current A conceptual row containing pertinent information about a cerPort owned by a card.
| ||||
| CcerPortCardId | 1.3.6.1.4.1.4998.1.1.10.1.4.13.1.2 | CardId | NA | |
column · CardId · not-accessible · current The unique id of the card this cerPort belongs to. | ||||
| CcerPortId | 1.3.6.1.4.1.4998.1.1.10.1.4.13.1.3 | PortId | NA | |
column · PortId · not-accessible · current The unique id of this cerPort within a card. the the cardId and cerPortId uniquely identify a port | ||||
| CcerPortType | 1.3.6.1.4.1.4998.1.1.10.1.4.13.1.4 | CerPortType | RW | |
column · CerPortType · read-write · current Type of this cerPort. | ||||
| CcerPortAdminState | 1.3.6.1.4.1.4998.1.1.10.1.4.13.1.6 | AdminState | RW | |
column · AdminState · read-write · current The Admin state of this cerPort | ||||
| CcerPortPrState | 1.3.6.1.4.1.4998.1.1.10.1.4.13.1.7 | PrimaryState | RO | |
column · PrimaryState · read-only · current The primary state of this cerPort | ||||
| CcerPortSecState | 1.3.6.1.4.1.4998.1.1.10.1.4.13.1.8 | SecondaryState | RO | |
column · SecondaryState · read-only · current The secondary state of this cerPort | ||||
| CcerPortDplxStatus | 1.3.6.1.4.1.4998.1.1.10.1.4.13.1.9 | DuplexStatus | RO | |
column · DuplexStatus · read-only · current The port Duplexing status. | ||||
| CcerPortAction | 1.3.6.1.4.1.4998.1.1.10.1.4.13.1.11 | EqActionType | RW | |
column · EqActionType · read-write · current Write-only action performed on a Port. | ||||
| CcerPortTrapInh | 1.3.6.1.4.1.4998.1.1.10.1.4.13.1.12 | Bits | RW | |
column · Bits · read-write · current If a bit is set, the corresponding state change trap will not be sent.
| ||||
| CcerPortNumChans | 1.3.6.1.4.1.4998.1.1.10.1.4.13.1.13 | Integer32 (0..50) | RO | |
column · Integer32 (0..50) · read-only · current Number of channels this cerPort contains. | ||||
| CcerPortDocsIfIndex | 1.3.6.1.4.1.4998.1.1.10.1.4.13.1.14 | InterfaceIndexOrZero | RO | |
column · InterfaceIndexOrZero · read-only · current This object indicates the location of an interface in the cerPort table that represents this port. A value of 0 indicates that this cerPort does not have an association in the Iftable. | ||||
| CcerPortMacAddress | 1.3.6.1.4.1.4998.1.1.10.1.4.13.1.15 | MacAddress | RO | |
column · MacAddress · read-only · current The physical address value for this card. This value is used to populate the ifPhysAddress field in the IfTable and other Tables in docsis RFC MIBs. | ||||
| CcerPortMode | 1.3.6.1.4.1.4998.1.1.10.1.4.13.1.16 | PortMode | RW | |
column · PortMode · read-write · current The desired operating mode of an ethernet cerPort. Not yet implemented. | ||||
| CcerPortDetectedMode | 1.3.6.1.4.1.4998.1.1.10.1.4.13.1.17 | PortDetectedMode | RO | |
column · PortDetectedMode · read-only · current The current operating mode of an ethernet cerPort. | ||||
| CcerPortBgpId | 1.3.6.1.4.1.4998.1.1.10.1.4.13.1.19 | Integer32 (-2147483647..2147483647) | RO | |
column · Integer32 (-2147483647..2147483647) · read-only · current The bridge group cerPort id for this port. | ||||
| CcerPortConnectorId | 1.3.6.1.4.1.4998.1.1.10.1.4.13.1.20 | PortId | RW | |
column · PortId · read-write · current For a DOCSIS or EQAM type port, this is the rear PIC connector. Otherwise, the value of this object is invalid. | ||||
| CcerPortCardSubType | 1.3.6.1.4.1.4998.1.1.10.1.4.13.1.21 | CerCardSubType | RO | |
column · CerCardSubType · read-only · current The CardSubType of the card this cerPort belongs to. | ||||
| CcerPortDescription | 1.3.6.1.4.1.4998.1.1.10.1.4.13.1.27 | DisplayString (SIZE (0..64)) | RW | |
column · DisplayString (SIZE (0..64)) · read-write · current A persistent copy of ifAlias for this interface. | ||||
| CcerPortCurrDsPower | 1.3.6.1.4.1.4998.1.1.10.1.4.13.1.28 | TenthdBmV | RO | |
column · TenthdBmV · read-only · current The latest downstream power level reported by the port. This is valid on for ports of type dport. | ||||
| CcerPortMinDsPower | 1.3.6.1.4.1.4998.1.1.10.1.4.13.1.29 | TenthdBmV | RO | |
column · TenthdBmV · read-only · current The latest downstream power level recerPorted by the port. This is valid only for downstream ports. | ||||
| CcerPortMaxDsPower | 1.3.6.1.4.1.4998.1.1.10.1.4.13.1.30 | TenthdBmV | RO | |
column · TenthdBmV · read-only · current The latest downstream power level recerPorted by the port. This is valid only for downstream ports. | ||||
| CcerPortTxFlowControlMode | 1.3.6.1.4.1.4998.1.1.10.1.4.13.1.31 | FlowControlMode | RW | |
column · FlowControlMode · read-write · current The transmit flow control settings for this port (network ports only). | ||||
| CcerPortRxFlowControlMode | 1.3.6.1.4.1.4998.1.1.10.1.4.13.1.32 | FlowControlMode | RW | |
column · FlowControlMode · read-write · current The receive flow control settings for this port (network ports only). | ||||
| CcerPortTxFlowControlDetected | 1.3.6.1.4.1.4998.1.1.10.1.4.13.1.33 | FlowControlMode | RO | |
column · FlowControlMode · read-only · current The recerPorted transmit flow control settings for this port (network ports only). | ||||
| CcerPortRxFlowControlDetected | 1.3.6.1.4.1.4998.1.1.10.1.4.13.1.34 | FlowControlMode | RO | |
column · FlowControlMode · read-only · current The recerPorted receive flow control settings for this port (network ports only). | ||||
| CcerPortMacIfIndex | 1.3.6.1.4.1.4998.1.1.10.1.4.13.1.35 | InterfaceIndexOrZero | RO | |
column · InterfaceIndexOrZero · read-only · current The MAC IfIndex currently associcated with the upstream or downstream port. | ||||
| CcerPortGroupId | 1.3.6.1.4.1.4998.1.1.10.1.4.13.1.36 | PortId | RO | |
column · PortId · read-only · current The unique id of port group associated with this port. | ||||
| CcerPortGroupPortId | 1.3.6.1.4.1.4998.1.1.10.1.4.13.1.37 | PortId | RO | |
column · PortId · read-only · current The unique id of this port in the port group. | ||||
| TcerDiskVolumeTable | 1.3.6.1.4.1.4998.1.1.10.1.4.14 | NA | ||
table · not-accessible · current A table of disk volume information. | ||||
| RcerDiskVolumeEntry | 1.3.6.1.4.1.4998.1.1.10.1.4.14.1 | NA | ||
row · not-accessible · current A conceptual row containing pertinent information about a disk volume | ||||
| CcerDiskVolumeCardId | 1.3.6.1.4.1.4998.1.1.10.1.4.14.1.2 | CardId | NA | |
column · CardId · not-accessible · current The unique id of the card this disk volume belongs to. | ||||
| CcerDiskVolumeDriveId | 1.3.6.1.4.1.4998.1.1.10.1.4.14.1.3 | Integer32 (1..99) | NA | |
column · Integer32 (1..99) · not-accessible · current The unique id of the disk drive this disk volume belongs to. A value of 99 indicates an invalid disk drive | ||||
| CcerDiskVolumeId | 1.3.6.1.4.1.4998.1.1.10.1.4.14.1.4 | Integer32 (1..99) | NA | |
column · Integer32 (1..99) · not-accessible · current The unique id of this disk volume. the cerDiskVolumeCardId, the diskVolumeDiskId, and the. A value of 99 indicate an invalid volume | ||||
| CcerDiskVolumeName | 1.3.6.1.4.1.4998.1.1.10.1.4.14.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current The name of the disk volume. | ||||
| CcerDiskVolumeSize | 1.3.6.1.4.1.4998.1.1.10.1.4.14.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The disk volume size in units of 2048 bytes.
| ||||
| CcerDiskVolumeUsageLevel | 1.3.6.1.4.1.4998.1.1.10.1.4.14.1.7 | DiskVolumeUsageLevel | RO | |
column · DiskVolumeUsageLevel · read-only · current The disk volume usage level. | ||||
| CcerDiskVolumeUsagePercentage | 1.3.6.1.4.1.4998.1.1.10.1.4.14.1.8 | Integer32 (0..100) | RO | |
column · Integer32 (0..100) · read-only · current The disk volume usage percentage.
| ||||
| CcerDiskVolumeUsageCriticalThreshold | 1.3.6.1.4.1.4998.1.1.10.1.4.14.1.9 | Integer32 (0..100) | RW | |
column · Integer32 (0..100) · read-write · current Usage percentage level when exceed will cause a cerDiskVolumeUsageNotification trap to be sent with cerDiskVolumeUsageLevel of diskVolumeUsageCritical.
| ||||
| CcerDiskVolumeUsageMajorThreshold | 1.3.6.1.4.1.4998.1.1.10.1.4.14.1.10 | Integer32 (0..100) | RW | |
column · Integer32 (0..100) · read-write · current Usage percentage level when exceed will cause a cerDiskVolumeUsageNotification trap to be sent with cerDiskVolumeUsageLevel of diskVolumeUsageMajor.
| ||||
| CcerDiskVolumeUsageMinorThreshold | 1.3.6.1.4.1.4998.1.1.10.1.4.14.1.11 | Integer32 (0..100) | RW | |
column · Integer32 (0..100) · read-write · current Usage percentage level when exceed will cause a cerDiskVolumeUsageNotification trap to be sent with cerDiskVolumeUsageLevel of diskVolumeUsageMinor.
| ||||
| CcerDiskVolumeAutoDeleteUnusedFile | 1.3.6.1.4.1.4998.1.1.10.1.4.14.1.12 | TruthValue | RW | |
column · TruthValue · read-write · current When set to TRUE to the system will automatically delete unused files when cerDiskVolumeUsage exceed the cerDiskVolumeUsageCriticalThreshold value. | ||||
| CcerDiskVolumeTrapInh | 1.3.6.1.4.1.4998.1.1.10.1.4.14.1.13 | Bits | RW | |
column · Bits · read-write · current If a bit is set, the corresponding trap will not be sent.
| ||||
| CcerDiskVolumeDiskSize | 1.3.6.1.4.1.4998.1.1.10.1.4.14.1.14 | Integer32 | RO | |
column · Integer32 · read-only · current Total physical disk capacity in bytes.
| ||||
| ScerDiskVolumeFileName | 1.3.6.1.4.1.4998.1.1.10.1.4.15 | DisplayString | AN | |
scalar · DisplayString · accessible-for-notify · current The name of a file on the disk volume use for trap notification. | ||||
| TcerCardDataTable | 1.3.6.1.4.1.4998.1.1.10.1.4.16 | NA | ||
table · not-accessible · current This table shows the contains version information for the modules installed. | ||||
| RcerCardDataEntry | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1 | NA | ||
row · not-accessible · current A conceptual row containing pertinent information about a card or a circuit pack.
| ||||
| CcerCardDataSerialNum | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1.1 | SnmpAdminString (SIZE (0..32)) | RO | |
column · SnmpAdminString (SIZE (0..32)) · read-only · current This is the serial number of the card. | ||||
| CcerCardDataFwVersion | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1.2 | SnmpAdminString (SIZE (0..128)) | RO | |
column · SnmpAdminString (SIZE (0..128)) · read-only · current This is the firmware or FPGA version number of the card. | ||||
| CcerCardDataHwVersion | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1.3 | SnmpAdminString (SIZE (0..128)) | RO | |
column · SnmpAdminString (SIZE (0..128)) · read-only · current This is the hardware version of the card. | ||||
| CcerCardDataHwDeviations | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1.4 | SnmpAdminString (SIZE (0..128)) | RO | |
column · SnmpAdminString (SIZE (0..128)) · read-only · current This is the set of hardware deviations for the card. | ||||
| CcerCardDataSwVersion | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1.5 | SnmpAdminString (SIZE (0..128)) | RO | |
column · SnmpAdminString (SIZE (0..128)) · read-only · current This is the software version of the card. | ||||
| CcerCardDataCpuType | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1.6 | SnmpAdminString (SIZE (0..25)) | RO | |
column · SnmpAdminString (SIZE (0..25)) · read-only · current The current CPU type of the card. | ||||
| CcerCardDataCpuSpeed | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1.7 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The current CPU speed of the card.
| ||||
| CcerCardDataBusSpeed | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1.8 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The current bus speed of the card.
| ||||
| CcerCardDataRamSize | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The current size of installed RAM of the card.
| ||||
| CcerCardDataNorFlashSize | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1.10 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The current size of installed FLASH of the card.
| ||||
| CcerCardDataNandFlashSize | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The current size of installed FLASH of the card.
| ||||
| CcerCardDataFpgaSource | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1.12 | FirmwareSource | RO | |
column · FirmwareSource · read-only · current The source of the running version of the FPGAs on the card. | ||||
| CcerCardDataBootVersion | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1.13 | SnmpAdminString (SIZE (0..90)) | RO | |
column · SnmpAdminString (SIZE (0..90)) · read-only · current The current versions of the boot loaders installed on the card. | ||||
| CcerCardDataLastBootVersion | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1.14 | SnmpAdminString (SIZE (0..90)) | RO | |
column · SnmpAdminString (SIZE (0..90)) · read-only · current The last version of the boot loader used on the card. | ||||
| CcerCardDataLastBootSource | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1.15 | FirmwareSource | RO | |
column · FirmwareSource · read-only · current The source of the version of the bootloader last used on the card. | ||||
| CcerCardDataPicSerialNum | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1.16 | SnmpAdminString (SIZE (0..32)) | RO | |
column · SnmpAdminString (SIZE (0..32)) · read-only · current This is the serial number of the PIC. | ||||
| CcerCardDataPicHwVersion | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1.17 | SnmpAdminString (SIZE (0..20)) | RO | |
column · SnmpAdminString (SIZE (0..20)) · read-only · current This is the hardware version of the PIC. | ||||
| CcerCardDataPicHwDeviations | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1.18 | SnmpAdminString (SIZE (0..20)) | RO | |
column · SnmpAdminString (SIZE (0..20)) · read-only · current This is the set of hardware deviations for the PIC. | ||||
| CcerCardDataPicModelNum | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1.19 | SnmpAdminString (SIZE (0..20)) | RO | |
column · SnmpAdminString (SIZE (0..20)) · read-only · current This is the model number of the PIC. | ||||
| CcerCardDataMfgDateTime | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1.20 | DateAndTime | RO | |
column · DateAndTime · read-only · current Date of the module's manufacture (FRU). | ||||
| CcerCardDataMfg | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1.21 | SnmpAdminString (SIZE (0..32)) | RO | |
column · SnmpAdminString (SIZE (0..32)) · read-only · current Name of the manufacturer (FRU). | ||||
| CcerCardDataProductName | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1.22 | SnmpAdminString (SIZE (0..32)) | RO | |
column · SnmpAdminString (SIZE (0..32)) · read-only · current Name of the product (FRU). | ||||
| CcerCardDataPartModelNum | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1.23 | SnmpAdminString (SIZE (0..32)) | RO | |
column · SnmpAdminString (SIZE (0..32)) · read-only · current Name of the model of this product (FRU). | ||||
| CcerCardDataProductVersion | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1.24 | SnmpAdminString (SIZE (0..32)) | RO | |
column · SnmpAdminString (SIZE (0..32)) · read-only · current Version of the model of this product (FRU). | ||||
| CcerCardDataAssetTag | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1.25 | SnmpAdminString (SIZE (0..128)) | RO | |
column · SnmpAdminString (SIZE (0..128)) · read-only · current Asset tag of this part (FRU). | ||||
| CcerCardDataCommittedSwVersion | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1.26 | SnmpAdminString (SIZE (0..128)) | RO | |
column · SnmpAdminString (SIZE (0..128)) · read-only · current This is the software version of the card. | ||||
| CcerCardDataFeedAPresent | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1.27 | TruthValue | RO | |
column · TruthValue · read-only · current This object indicates whether power feed A is present or not. | ||||
| CcerCardDataFeedBPresent | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1.28 | TruthValue | RO | |
column · TruthValue · read-only · current This object indicates whether power feed B is present or not. | ||||
| CcerCardDataAllowedPorts | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1.29 | Unsigned32 (0..5000) | RO | |
column · Unsigned32 (0..5000) · read-only · current This object indicates the allowed number of licensed ports. | ||||
| CcerCardDataLicenseAnnex | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1.30 | INTEGER | RO | |
column · INTEGER · read-only · current This object shows the annex associated with the license.
| ||||
| CcerCardDataLicensePorts | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1.31 | Unsigned32 (0..5000) | RO | |
column · Unsigned32 (0..5000) · read-only · current This object indicates the number of ports associated with the license. | ||||
| CcerCardDataLicenseDate | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1.32 | DateAndTime | RO | |
column · DateAndTime · read-only · current This object indicates the date associated with the license. | ||||
| CcerCardDataPatchVersions | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1.33 | SnmpAdminString (SIZE (0..128)) | RO | |
column · SnmpAdminString (SIZE (0..128)) · read-only · current This is the patch version(s) running on the card. | ||||
| CcerCardDataPicModelName | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1.34 | SnmpAdminString (SIZE (0..64)) | RO | |
column · SnmpAdminString (SIZE (0..64)) · read-only · current This is the model name of the PIC. | ||||
| CcerCardDataPicMfgRevision | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1.35 | SnmpAdminString (SIZE (0..64)) | RO | |
column · SnmpAdminString (SIZE (0..64)) · read-only · current This is the manufacture revision of the PIC. | ||||
| CcerCardDataPicMfg | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1.36 | SnmpAdminString (SIZE (0..64)) | RO | |
column · SnmpAdminString (SIZE (0..64)) · read-only · current This is the manufacturer of the PIC. | ||||
| CcerCardDataPicMfgDateTime | 1.3.6.1.4.1.4998.1.1.10.1.4.16.1.37 | DateAndTime | RO | |
column · DateAndTime · read-only · current This object indicates the date associated with the PIC. | ||||
| TcerFanStatusTable | 1.3.6.1.4.1.4998.1.1.10.1.4.17 | NA | ||
table · not-accessible · current Status information for the E6 fans. | ||||
| RcerFanStatusEntry | 1.3.6.1.4.1.4998.1.1.10.1.4.17.1 | NA | ||
row · not-accessible · current A conceptual row containing information about one of the fans.
| ||||
| CcerFan1Speed | 1.3.6.1.4.1.4998.1.1.10.1.4.17.1.1 | Integer32 (0..2147483647) | RO | |
column · Integer32 (0..2147483647) · read-only · current The last measured speed of fan1.
| ||||
| CcerFan2Speed | 1.3.6.1.4.1.4998.1.1.10.1.4.17.1.2 | Integer32 (0..2147483647) | RO | |
column · Integer32 (0..2147483647) · read-only · current The last measured speed of fan2.
| ||||
| CcerFan3Speed | 1.3.6.1.4.1.4998.1.1.10.1.4.17.1.3 | Integer32 (0..2147483647) | RO | |
column · Integer32 (0..2147483647) · read-only · current The last measured speed of fan3.
| ||||
| CcerFanLevel | 1.3.6.1.4.1.4998.1.1.10.1.4.17.1.4 | Integer32 (0..255) | RO | |
column · Integer32 (0..255) · read-only · current The last measured speed level of fans. | ||||
| CcerFanAmbientTemperature | 1.3.6.1.4.1.4998.1.1.10.1.4.17.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The last measured ambient temperature of fans.
| ||||
| TcerPemStatusTable | 1.3.6.1.4.1.4998.1.1.10.1.4.18 | NA | ||
table · not-accessible · current PEM Status information for the E6 power modules. | ||||
| RcerPemStatusEntry | 1.3.6.1.4.1.4998.1.1.10.1.4.18.1 | NA | ||
row · not-accessible · current A conceptual row containing information about one of the power modules.
| ||||
| CcerPemLedStatus | 1.3.6.1.4.1.4998.1.1.10.1.4.18.1.1 | INTEGER | RO | |
column · INTEGER · read-only · current LED status of the PEM
| ||||
| CcerPemFeed1Voltage | 1.3.6.1.4.1.4998.1.1.10.1.4.18.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current Feed 1 voltage
| ||||
| CcerPemFeed1Current | 1.3.6.1.4.1.4998.1.1.10.1.4.18.1.3 | Integer32 | RO | |
column · Integer32 · read-only · current Feed 1 current
| ||||
| CcerPemFeed2Voltage | 1.3.6.1.4.1.4998.1.1.10.1.4.18.1.4 | Integer32 | RO | |
column · Integer32 · read-only · current Feed 2 voltage
| ||||
| CcerPemFeed2Current | 1.3.6.1.4.1.4998.1.1.10.1.4.18.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current Feed 2 current
| ||||
| CcerPemFeed1Present | 1.3.6.1.4.1.4998.1.1.10.1.4.18.1.6 | TruthValue | RO | |
column · TruthValue · read-only · current Feed 1 presence | ||||
| CcerPemFeed2Present | 1.3.6.1.4.1.4998.1.1.10.1.4.18.1.7 | TruthValue | RO | |
column · TruthValue · read-only · current Feed 2 presence | ||||
| CcerPemCircuitBreaker1Enable | 1.3.6.1.4.1.4998.1.1.10.1.4.18.1.8 | TruthValue | RO | |
column · TruthValue · read-only · current circuit breaker 1 presence | ||||
| CcerPemCircuitBreaker2Enable | 1.3.6.1.4.1.4998.1.1.10.1.4.18.1.9 | TruthValue | RO | |
column · TruthValue · read-only · current circuit breaker 2 presence | ||||
| CcerPemBranchPresent | 1.3.6.1.4.1.4998.1.1.10.1.4.18.1.10 | Bits | RO | |
column · Bits · read-only · current brach A through I presence
| ||||
| NequipmentDiag | 1.3.6.1.4.1.4998.1.1.10.1.5 | |||
| NeqDiagConfig | 1.3.6.1.4.1.4998.1.1.10.1.5.1 | |||
| SremainInDiagMode | 1.3.6.1.4.1.4998.1.1.10.1.5.1.1 | TruthValue | RW | |
scalar · TruthValue · read-write · current When set to TRUE, the device being diagnosed will remain in diagnostic state when the diagnostic test is completed. When set to FALSE, the device will revert to its original state when the diagnostic test is completed. | ||||
| SconsoleOutput | 1.3.6.1.4.1.4998.1.1.10.1.5.1.2 | TruthValue | NA | obsolete |
scalar · TruthValue · not-accessible · obsolete If true then the diagnostic result will be displayed on the system console. | ||||
| SverboseLevel | 1.3.6.1.4.1.4998.1.1.10.1.5.1.3 | Integer32 (0..2) | RW | |
scalar · Integer32 (0..2) · read-write · current Verbose output level for diagnostic console output display. Higher number indicate more detailed output. | ||||
| SdiagTestId | 1.3.6.1.4.1.4998.1.1.10.1.5.2 | TestId | AN | |
scalar · TestId · accessible-for-notify · current Test Identification Number. Used in cardTestResultNotification variable-binding | ||||
| TcardTestTable | 1.3.6.1.4.1.4998.1.1.10.1.5.3 | NA | ||
table · not-accessible · current A table of test available for a card. | ||||
| RcardTestEntry | 1.3.6.1.4.1.4998.1.1.10.1.5.3.1 | NA | ||
row · not-accessible · current A conceptual row containing information about tests or dignostics available for a card.
| ||||
| CcardTestIndex | 1.3.6.1.4.1.4998.1.1.10.1.5.3.1.2 | CardId | NA | |
column · CardId · not-accessible · current Card Identification Number taken from the CardTable. Used as index. | ||||
| CcardTestId | 1.3.6.1.4.1.4998.1.1.10.1.5.3.1.3 | TestId | NA | |
column · TestId · not-accessible · current Test Identification Number. Used as index to test table | ||||
| CcardTestName | 1.3.6.1.4.1.4998.1.1.10.1.5.3.1.4 | DisplayString (SIZE (0..100)) | RO | |
column · DisplayString (SIZE (0..100)) · read-only · current A unique name for this test. | ||||
| CcardTestType | 1.3.6.1.4.1.4998.1.1.10.1.5.3.1.5 | TestType | RO | |
column · TestType · read-only · current Test Type. | ||||
| CcardTestDescription | 1.3.6.1.4.1.4998.1.1.10.1.5.3.1.6 | DisplayString | RO | |
column · DisplayString · read-only · current A short description of the test. | ||||
| CcardTestCommand | 1.3.6.1.4.1.4998.1.1.10.1.5.3.1.7 | TestCommand | RW | |
column · TestCommand · read-write · current Command to be execute this test on this shelf | ||||
| CcardTestScheduleCommand | 1.3.6.1.4.1.4998.1.1.10.1.5.3.1.8 | TestScheduleCommand | RW | |
column · TestScheduleCommand · read-write · current Schedule Command to be execute this test on this shelf | ||||
| CcardTestSchedule | 1.3.6.1.4.1.4998.1.1.10.1.5.3.1.9 | TestSchedule | RW | |
column · TestSchedule · read-write · current Test Scheduling. | ||||
| CcardTestTime | 1.3.6.1.4.1.4998.1.1.10.1.5.3.1.10 | DateAndTime | RW | |
column · DateAndTime · read-write · current Test start time. | ||||
| CcardTestResult | 1.3.6.1.4.1.4998.1.1.10.1.5.3.1.11 | TestResult | RO | |
column · TestResult · read-only · current Result of the test. | ||||
| CcardTestResultDesc | 1.3.6.1.4.1.4998.1.1.10.1.5.3.1.12 | DisplayString | RO | |
column · DisplayString · read-only · current Additional information of the test result. | ||||
| CcardTestTransId | 1.3.6.1.4.1.4998.1.1.10.1.5.3.1.13 | TestTransactionId | RW | |
column · TestTransactionId · read-write · current Test transaction Id. | ||||
| NequipmentAudit | 1.3.6.1.4.1.4998.1.1.10.1.6 | |||
| SauditAutoScheduling | 1.3.6.1.4.1.4998.1.1.10.1.6.1 | TruthValue | RW | |
scalar · TruthValue · read-write · current Enable or disable automatic audit execution. | ||||
| SauditLogOutput | 1.3.6.1.4.1.4998.1.1.10.1.6.2 | TruthValue | RW | |
scalar · TruthValue · read-write · current Enable or disable logging of error entries to system log. | ||||
| SauditLogThrottle | 1.3.6.1.4.1.4998.1.1.10.1.6.3 | TruthValue | RW | |
scalar · TruthValue · read-write · current Enable or disable audit log output throttling to prevent audit errors from flooding the log. | ||||
| TauditTable | 1.3.6.1.4.1.4998.1.1.10.1.6.4 | NA | ||
table · not-accessible · current A table of test available for a card. | ||||
| RauditEntry | 1.3.6.1.4.1.4998.1.1.10.1.6.4.1 | NA | ||
row · not-accessible · current A conceptual row contains information about Audits.
| ||||
| CauditCardId | 1.3.6.1.4.1.4998.1.1.10.1.6.4.1.2 | CardId | NA | |
column · CardId · not-accessible · current Card Identification Number taken from the CardTable. Used as index. | ||||
| CauditId | 1.3.6.1.4.1.4998.1.1.10.1.6.4.1.3 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current Unique ID of the internal Audit | ||||
| CauditName | 1.3.6.1.4.1.4998.1.1.10.1.6.4.1.4 | DisplayString | RO | |
column · DisplayString · read-only · current Name of the internal Audit | ||||
| CauditDescription | 1.3.6.1.4.1.4998.1.1.10.1.6.4.1.5 | DisplayString | RO | |
column · DisplayString · read-only · current Description of the Audit | ||||
| CauditTime | 1.3.6.1.4.1.4998.1.1.10.1.6.4.1.6 | DateAndTime | RO | |
column · DateAndTime · read-only · current Start time of the audit. | ||||
| CauditCommand | 1.3.6.1.4.1.4998.1.1.10.1.6.4.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Audit Commands. The runnow command will stop the currently running audit sequence and start executing requested audit immediated. If enabled, automatic audit schedule will be restarted.
| ||||
| CauditStatus | 1.3.6.1.4.1.4998.1.1.10.1.6.4.1.8 | INTEGER | RO | |
column · INTEGER · read-only · current Audit status.
| ||||
| CauditResult | 1.3.6.1.4.1.4998.1.1.10.1.6.4.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current Audit Result.
| ||||
| CauditPassedCount | 1.3.6.1.4.1.4998.1.1.10.1.6.4.1.10 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Number of passed entry during previous audit run. | ||||
| CauditFailedCount | 1.3.6.1.4.1.4998.1.1.10.1.6.4.1.11 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Number of failed entry during previous audit run. | ||||
| CauditCycleCount | 1.3.6.1.4.1.4998.1.1.10.1.6.4.1.12 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Number of audit run completed. | ||||
| CauditTotalPassedCount | 1.3.6.1.4.1.4998.1.1.10.1.6.4.1.13 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Number of cumulative passed entry of all audit runs. | ||||
| CauditTotalFailedCount | 1.3.6.1.4.1.4998.1.1.10.1.6.4.1.14 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Number of cumulative failed entry of all audit runs. | ||||
| NcmDevice | 1.3.6.1.4.1.4998.1.1.10.1.8 | |||
| ScmMacAddress | 1.3.6.1.4.1.4998.1.1.10.1.8.1 | MacAddress | AN | |
scalar · MacAddress · accessible-for-notify · current The MAC address for the cable modem | ||||
| ScmVendor | 1.3.6.1.4.1.4998.1.1.10.1.8.2 | DisplayString | AN | |
scalar · DisplayString · accessible-for-notify · current The vendor name of the cable modem | ||||
| ScmResetReason | 1.3.6.1.4.1.4998.1.1.10.1.8.3 | DisplayString | AN | |
scalar · DisplayString · accessible-for-notify · current The reason for the cable modem to reset | ||||
| ScmUChannelID | 1.3.6.1.4.1.4998.1.1.10.1.8.4 | Integer32 (0..255) | AN | |
scalar · Integer32 (0..255) · accessible-for-notify · current The CMTS upstream channel ID which is connected to the cable modem | ||||
| ScmPrimarySID | 1.3.6.1.4.1.4998.1.1.10.1.8.5 | Unsigned32 (0..16383) | AN | |
scalar · Unsigned32 (0..16383) · accessible-for-notify · current The primary Service Identifier (SID) assigned by the CMTS associated with the cable modem | ||||
| ScmResetStatus | 1.3.6.1.4.1.4998.1.1.10.1.8.6 | DisplayString | AN | |
scalar · DisplayString · accessible-for-notify · current The cable modem status before it resets | ||||
| ScmResetUpTime | 1.3.6.1.4.1.4998.1.1.10.1.8.7 | TimeTicks | AN | |
scalar · TimeTicks · accessible-for-notify · current This value indicates how long in hundreds of seconds the cable modem is up since it is initial ranged | ||||
| ScmResetInfo | 1.3.6.1.4.1.4998.1.1.10.1.8.8 | DisplayString | AN | |
scalar · DisplayString · accessible-for-notify · current The additional information for the cable modem to reset | ||||
| ScmIpAddress | 1.3.6.1.4.1.4998.1.1.10.1.8.9 | OCTET STRING (SIZE (4 | 16)) | AN | |
scalar · OCTET STRING (SIZE (4 | 16)) · accessible-for-notify · current The IP Address of the cable modem | ||||
| NequipmentError | 1.3.6.1.4.1.4998.1.1.10.1.9 | |||
| TfpgaErrorEventTable | 1.3.6.1.4.1.4998.1.1.10.1.9.1 | NA | ||
table · not-accessible · current Overrides default handling of FPGA error events. | ||||
| RfpgaErrorEventEntry | 1.3.6.1.4.1.4998.1.1.10.1.9.1.1 | NA | ||
row · not-accessible · current A conceptual row containing information about FPGA error event handling.
| ||||
| CerrEventId | 1.3.6.1.4.1.4998.1.1.10.1.9.1.1.1 | Unsigned32 (0..4294967295) | NA | |
column · Unsigned32 (0..4294967295) · not-accessible · current Event ID associated with the FPGA error. A row in this table defines behavior for a specific FPGA error that overrides the default behavior of the system. | ||||
| CerrEvRecoveryEnabled | 1.3.6.1.4.1.4998.1.1.10.1.9.1.1.2 | TruthValue | RC | |
column · TruthValue · read-create · current If true, the card can be recovered when this FPGA error is detected. When the card is recovered depends on the setting of errEvRecoveryThreshold. If this value is false, the card will not be recovered when this error is detected. | ||||
| CerrEvLoggingEnabled | 1.3.6.1.4.1.4998.1.1.10.1.9.1.1.3 | TruthValue | RC | |
column · TruthValue · read-create · current If true, the card will provide notification of the occurance of the this error. When the notification occurs is dependent on the setting of errEvLogThrottleThreshold. The severity of the notification is determined by the setting of errEvLogLevel. | ||||
| CerrEvLogLevel | 1.3.6.1.4.1.4998.1.1.10.1.9.1.1.4 | Integer32 (1..8) | RC | |
column · Integer32 (1..8) · read-create · current If errEvLoggingEnabled is true, this setting sets the severity level of the generated notification. In general, higher values indicate lower severity. | ||||
| CerrEvRowStatus | 1.3.6.1.4.1.4998.1.1.10.1.9.1.1.5 | RowStatus | RC | |
column · RowStatus · read-create · current The only set actions supported on this table are createAndGo(4) and destroy(6). | ||||
| CerrEvCardId | 1.3.6.1.4.1.4998.1.1.10.1.9.1.1.6 | CardId | NA | |
column · CardId · not-accessible · current The unique id of this card within the shelf. | ||||
| NcadEquipmentMibConformance | 1.3.6.1.4.1.4998.1.1.10.1.10 | |||
| NcadEquipmentMibCompliances | 1.3.6.1.4.1.4998.1.1.10.1.10.1 | |||
| McadEquipmentMibCompliance | 1.3.6.1.4.1.4998.1.1.10.1.10.1.1 | |||
compliance · current The compliance statement for entities which implement the Equipment MIB. | ||||
| NcadEquipmentMibGroup | 1.3.6.1.4.1.4998.1.1.10.1.10.2 | |||
| GsystemGeneralGroup | 1.3.6.1.4.1.4998.1.1.10.1.10.2.1 | |||
group · current This group contains a collection of objects general to the overall system.
| ||||
| GequipmentStateGroup | 1.3.6.1.4.1.4998.1.1.10.1.10.2.2 | |||
group · current This group contains a collection of objects general to the state of the equipments.
| ||||
| GequipmentShelfGroup | 1.3.6.1.4.1.4998.1.1.10.1.10.2.3 | |||
group · current This group contains a collection of objects general specific to shelf objects.
| ||||
| GequipmentDiagGroup | 1.3.6.1.4.1.4998.1.1.10.1.10.2.6 | |||
group · current This group contains a collection of objects specific to equipment diagnostics.
| ||||
| GequipmentCardTestGroup | 1.3.6.1.4.1.4998.1.1.10.1.10.2.8 | |||
group · current This group contains a collection of objects specific to card Test group | ||||
| GequipmentAuditGroup | 1.3.6.1.4.1.4998.1.1.10.1.10.2.10 | |||
group · current This group contains a collection of objects specific audit group. | ||||
| GfpgaErrorEventGroup | 1.3.6.1.4.1.4998.1.1.10.1.10.2.12 | |||
group · current This group contains a collection of objects dealing with FPGA errors. | ||||
| GequipmentCerCardGroup | 1.3.6.1.4.1.4998.1.1.10.1.10.2.14 | |||
group · current This group contains a collection of objects general specific to Card tables.
| ||||
| GequipmentCerPortGroup | 1.3.6.1.4.1.4998.1.1.10.1.10.2.15 | |||
group · current This group contains a collection of objects specific to Port table.
| ||||
| GcerDiskVolumeGroup | 1.3.6.1.4.1.4998.1.1.10.1.10.2.21 | |||
group · current This group contains a collection of objects specific to disk volume objects. | ||||
| NcerSpareModeExt | 1.3.6.1.4.1.4998.1.1.10.1.11 | |||
| TcerSpareModeExtTable | 1.3.6.1.4.1.4998.1.1.10.1.11.1 | NA | ||
table · not-accessible · current Allows overriding the configured sparing mode for a spare group based on the fault type that caused the sparing event. | ||||
| RcerSpareModeExtEntry | 1.3.6.1.4.1.4998.1.1.10.1.11.1.1 | NA | ||
row · not-accessible · current A conceptual row containing information about sparing overrides for a spare group. | ||||
| CcerSpareModeCardId | 1.3.6.1.4.1.4998.1.1.10.1.11.1.1.1 | CardId | NA | |
column · CardId · not-accessible · current The cardId of the spare group leader for this override. | ||||
| CcerSpareModeFaultId | 1.3.6.1.4.1.4998.1.1.10.1.11.1.1.2 | INTEGER | NA | |
column · INTEGER · not-accessible · current The fault group associated with the override behavior. When an event occurs that would normally trigger a card reset and a sparing event and that event is in the configured fault group, the mode configured in the cerCard table is overriden. pingFault - Communications failure with active controller initTimeout - Timeout during card initialization ersmFault - Card ERSM failure swException - Software exception failure bcm3142Err - Upstream CAM PHY device fatal fault condition dulFailure - Upstream CAM periodic packet loop detected uncorrectable fault dataplaneFailrue - Fatal errors originating in dataplane processor dsUnderPower - Downstream CAM detected power on a connector is below operational threshold dsOverPower - Downstream CAM detected power on a connector is above operational threshold sbecOverflow - Excessive number of single bit ECC errors deviceFatal - General device fatal error. For example in internal datapaths or pci controller. fpgaFatalError - Fatal CRC errors detected in FPGA device clockLost - Loss of clock or loss of clock lock pwrSensorHighFault - Detected voltage is above operational threshold pwrSensorLowFault - Detected voltage is below operational threshold fpgaBufferPoolFault - Number of available buffers in MAC fpga is below threshold dataplaneLinkFault - Card has lost dataplane connectivity monitoredTaskFailure - Monitored software task has failed
| ||||
| CcerSpareModeMode | 1.3.6.1.4.1.4998.1.1.10.1.11.1.1.3 | INTEGER | RC | |
column · INTEGER · read-create · current The sparing mode that should be enforced when an error in the configured catagory occurs that results in a sparing event.
| ||||
| CcerSpareModeRowStatus | 1.3.6.1.4.1.4998.1.1.10.1.11.1.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current The only set actions supported on this table are createAndGo(4) and destroy(6). | ||||
| NlicenseError | 1.3.6.1.4.1.4998.1.1.10.1.12 | |||
| ScerLicenseTypeStr | 1.3.6.1.4.1.4998.1.1.10.1.12.1 | DisplayString (SIZE (0..40)) | AN | |
scalar · DisplayString (SIZE (0..40)) · accessible-for-notify · current The license type that caused the notification. | ||||
Textual conventions
CerCamFaultTrapTypeINTEGERfpgaFatalError(12)The types of CAM faults that will be logged and a trap sent.
TestCommandINTEGERdisable(3)enable(4)noop(1)runNow(5)stop(2)A set of commands applicable to this test. A value of noop will do nothing.
TestIdInteger32 (1..100)Used as index to Test Tables.
TestResultINTEGERabort(7)fail(4)inProgress(2)inconclusive(5)notRun(1)pass(3)timeOut(6)Test Result.
TestScheduleInteger32A set of scheduling interval option applicable to this test only if Schedule is selected. This is recommended for hardware routine exercise (REX). The value expresses in multiple of hours. For example: 1 hour interval, 24 hour interval, 48 hour interval. A value of 0 indicate no scheduling option for this test.
TestScheduleCommandINTEGERdisable(2)enable(3)noop(1)A set of periodic schedule command applicable to this test. This is used in conjunction with the TestSchedule and TestTime to specify the start time of the test. If the TestSchedule value is 0, then the test will be executed once at the time specified by the TestTime. For any other TestSchedule value, the test will be executed at time specified by the TestTime and repeated periodically base on the value specified by TestSchedule. A value of noop will do nothing.
TestTransactionIdInteger32 (0..2147483647)Transaction Id associated with a test or diagnostic. The EMS must populate the value of this object to be able to correlate the test sent and the result coming back.
TestTypeINTEGERdiagnostic(2)test(1)unknown(3)Indicates whether this is a 'Test', a 'Diagnostic', or unknown.
Traps / Notifications
- cardTempNoReportNotification
1.3.6.1.4.1.4998.1.1.10.1.0.20 - cardTempOutOfRangeNotification
1.3.6.1.4.1.4998.1.1.10.1.0.19 - cardTempOverHeatNotification
1.3.6.1.4.1.4998.1.1.10.1.0.21 - cardTestResultNotification
1.3.6.1.4.1.4998.1.1.10.1.0.33 - cerCamFaultNotification
1.3.6.1.4.1.4998.1.1.10.1.0.41 - cerCardDetectedChange
1.3.6.1.4.1.4998.1.1.10.1.0.27 - cerCardDplxStatusChange
1.3.6.1.4.1.4998.1.1.10.1.0.28 - cerCardPrStateChange
1.3.6.1.4.1.4998.1.1.10.1.0.25 - cerCardSecStateChange
1.3.6.1.4.1.4998.1.1.10.1.0.26 - cerDiskVolumeAutoDeleteFileNotification
1.3.6.1.4.1.4998.1.1.10.1.0.36 - cerDiskVolumeUsageNotification
1.3.6.1.4.1.4998.1.1.10.1.0.35 - cerPortDplxStatusChange
1.3.6.1.4.1.4998.1.1.10.1.0.31 - cerPortPrStateChange
1.3.6.1.4.1.4998.1.1.10.1.0.29 - cerPortSecStateChange
1.3.6.1.4.1.4998.1.1.10.1.0.30 - cmRegistrationNotification
1.3.6.1.4.1.4998.1.1.10.1.0.23 - cmResetClearNotification
1.3.6.1.4.1.4998.1.1.10.1.0.15 - cmResetNotification
1.3.6.1.4.1.4998.1.1.10.1.0.16 - downstreamPowerLoss
1.3.6.1.4.1.4998.1.1.10.1.0.22 - noLicenseNotification
1.3.6.1.4.1.4998.1.1.10.1.0.24