BCS-TRAPS-MIB
General InstrumentThe MIB module for the bcs common trap objects.
snmptranslate -m BCS-TRAPS-MIB -Tpsnmpwalk -v2c -c <community> -m BCS-TRAPS-MIB <host> 1.3.6.1.4.1.1166.7.3Imports
| BCS-IDENT-MIB | bcs |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IbcsTraps | 1.3.6.1.4.1.1166.7.3 | |||
identity The MIB module for the bcs common trap objects. | ||||
| NbcsTrapElements | 1.3.6.1.4.1.1166.7.3.1 | |||
| StrapIdentifier | 1.3.6.1.4.1.1166.7.3.1.1 | INTEGER (1..2147483647) | RO | |
scalar · INTEGER (1..2147483647) · read-only · current This object identifies the specific notification issued by the network element. | ||||
| StrapSequenceId | 1.3.6.1.4.1.1166.7.3.1.2 | INTEGER (1..2147483647) | RO | |
scalar · INTEGER (1..2147483647) · read-only · current This object identifies the specific notification issued by the network element. | ||||
| StrapNetworkElemModelNumber | 1.3.6.1.4.1.1166.7.3.1.3 | DisplayString | RO | |
scalar · DisplayString · read-only · current The value of this object is the model number of the network element. Combination of Model # and Serial # is used as the unique identifier of the NE. | ||||
| StrapNetworkElemSerialNum | 1.3.6.1.4.1.1166.7.3.1.4 | DisplayString | RO | |
scalar · DisplayString · read-only · current The value of this object is the serial number of the network element. Combination of Model # and Serial # is used as the unique identifier of the NE. | ||||
| StrapPerceivedSeverity | 1.3.6.1.4.1.1166.7.3.1.5 | INTEGER | RO | |
scalar · INTEGER · read-only · current This parameter defines five severity levels, which provide an indication of how it is perceived that the capability of the managed object has been affected. The other level is not a severity level, but indicates that an alarm has been cleared, and thus is no longer in alarm state. Note that this field has no meaning for configuration change traps.
| ||||
| StrapNetworkElemOperState | 1.3.6.1.4.1.1166.7.3.1.6 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current Operational State of the Network Element which generated the trap.
| ||||
| StrapNetworkElemAlarmStatus | 1.3.6.1.4.1.1166.7.3.1.7 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current Alarm Status of the Network Element Alarm Status is always equal to the highest severity level of all outstanding alarms in this NE.
| ||||
| StrapNetworkElemAdminState | 1.3.6.1.4.1.1166.7.3.1.8 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current Adminsitrative state of the network element.
| ||||
| StrapNetworkElemAvailStatus | 1.3.6.1.4.1.1166.7.3.1.9 | INTEGER | RO | |
scalar · INTEGER · read-only · current The current Operational state of the network elment is defined in ISO/IEC 10164-2.
| ||||
| StrapText | 1.3.6.1.4.1.1166.7.3.1.10 | DisplayString | RO | |
scalar · DisplayString · read-only · current This variable contains an optional trap text. | ||||
| StrapNETrapLastTrapTimeStamp | 1.3.6.1.4.1.1166.7.3.1.11 | TimeTicks | RO | |
scalar · TimeTicks · read-only · current This OBJECT IDENTIFIER is used to hold time, in hundreths of a second since the network management portion of the system was last re-initialized. | ||||
| StrapChangedObjectId | 1.3.6.1.4.1.1166.7.3.1.12 | OBJECT IDENTIFIER | RO | |
scalar · OBJECT IDENTIFIER · read-only · current This variable identifies the object that has generated the trap. | ||||
| StrapAdditionalInfoInteger1 | 1.3.6.1.4.1.1166.7.3.1.13 | INTEGER (1..2147483647) | RO | |
scalar · INTEGER (1..2147483647) · read-only · current This 32 bit integer is used to hold specific information about the trap. | ||||
| StrapAdditionalInfoInteger2 | 1.3.6.1.4.1.1166.7.3.1.14 | INTEGER (1..2147483647) | RO | |
scalar · INTEGER (1..2147483647) · read-only · current This 32 bit integer is used to hold specific information about the trap. | ||||
| StrapAdditionalInfoInteger3 | 1.3.6.1.4.1.1166.7.3.1.15 | INTEGER (1..2147483647) | RO | |
scalar · INTEGER (1..2147483647) · read-only · current This 32 bit integer is used to hold specific information about the trap. | ||||
| StrapChangedValueDisplayString | 1.3.6.1.4.1.1166.7.3.1.16 | DisplayString | RO | |
scalar · DisplayString · read-only · current This DisplayString is used to hold specific information about the trap. | ||||
| StrapChangedValueOID | 1.3.6.1.4.1.1166.7.3.1.17 | DisplayString | RO | |
scalar · DisplayString · read-only · current This OBJECT IDENTIFIER is used to hold specific information about the trap. | ||||
| StrapChangedValueIpAddress | 1.3.6.1.4.1.1166.7.3.1.18 | IpAddress | RO | |
scalar · IpAddress · read-only · current This OBJECT IDENTIFIER is used to hold specific information about the trap. | ||||
| StrapChangedValueInteger | 1.3.6.1.4.1.1166.7.3.1.19 | INTEGER (1..2147483647) | RO | |
scalar · INTEGER (1..2147483647) · read-only · current This 32 bit integer is used to hold specific information about the trap. | ||||
| NbcsTrapControl | 1.3.6.1.4.1.1166.7.3.2 | |||
| SnumberOfTrapReceivers | 1.3.6.1.4.1.1166.7.3.2.1 | INTEGER (1..4) | RO | |
scalar · INTEGER (1..4) · read-only · current The number of managers to send traps to. This number can not exceed 4 | ||||
| TtrapReceiversTable | 1.3.6.1.4.1.1166.7.3.2.2 | NA | ||
table · not-accessible · current A list of managers to send traps to. The number of entries is given by the value of NumTrapReceivers. Maximum number of Trap Receivers is four. | ||||
| RtrapReceiversEntry | 1.3.6.1.4.1.1166.7.3.2.2.1 | NA | ||
| CtrapReceiversTableIndex | 1.3.6.1.4.1.1166.7.3.2.2.1.1 | INTEGER (1..4) | NA | |
column · INTEGER (1..4) · not-accessible · current The index to a trap receiver entry. | ||||
| CtrapReceiverAddr | 1.3.6.1.4.1.1166.7.3.2.2.1.2 | IpAddress | RW | |
column · IpAddress · read-write · current The IP address of the manager to send a trap to. NOTE: Changing TrapReceiverAddr FROM default value to anything else is equivalent of 'creating' of a new entry. Changing trapReceiverAddr TO default value will result in deletion of that entry. | ||||
| CtrapReceiverCommunityString | 1.3.6.1.4.1.1166.7.3.2.2.1.3 | DisplayString | RW | |
column · DisplayString · read-write · current The community name to use in the trap when sent to the manager. | ||||
| CtrapToBeSendQueueSize | 1.3.6.1.4.1.1166.7.3.2.2.1.4 | INTEGER (50..1000) | RW | |
column · INTEGER (50..1000) · read-write · current The agent maintains 2 queues: TrapsToBeSendQueue and TrapsSentQueue. The SNMP agent can receive a burst of traps which need to be sent to the network manager. The SNMP agent will put them in TrapsToBeSendQueue and from there hi will send traps to the a manager at throttling rate. The traps will be kept in sequence by the time at which they came in | ||||
| CtrapSentQueueSize | 1.3.6.1.4.1.1166.7.3.2.2.1.5 | INTEGER (50..300) | RW | |
column · INTEGER (50..300) · read-write · current The agent maintains 2 queues: TrapsToBeSendQueue and TrapsSentQueue. The SNMP agent maintains Trap History (TrapsSentQueue) by saving last 'X' sent traps. | ||||
| CtrapThrottlingRate | 1.3.6.1.4.1.1166.7.3.2.2.1.6 | Integer32 | RW | |
column · Integer32 · read-write · current The number of traps agent can send to a particular manager (trapReceiver) per second. | ||||
| CtrapLastSent | 1.3.6.1.4.1.1166.7.3.2.2.1.7 | INTEGER (1..2147483647) | RO | |
column · INTEGER (1..2147483647) · read-only · current This variable contains the last trapSequenceId (sequence number) agent sent to this manager. Upon startup agent will send cold-start trap and set value of TrapLastSent to 1. | ||||
| CtrapReceiversEntryOperState | 1.3.6.1.4.1.1166.7.3.2.2.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current The current Operational State of this entry in trapReceivers Table
| ||||
| CtrapResendRequest | 1.3.6.1.4.1.1166.7.3.2.2.1.9 | Integer32 | RW | |
column · Integer32 · read-write · current The manager may write this object when the indicated trap (indicated via trapIdentifier) should be resent. It is not intended to be read by the manager, but is read-write for compatability with older SNMP compilers. | ||||
| SnumberOfDiscriminators | 1.3.6.1.4.1.1166.7.3.2.3 | INTEGER (1..2147483647) | RO | |
scalar · INTEGER (1..2147483647) · read-only · current The number of EFDs (filters) agent has in it's database. This number can not exceed 20 | ||||
| TtrapDiscrimTable | 1.3.6.1.4.1.1166.7.3.2.4 | NA | ||
table · not-accessible · current A list of EFDs (trap filters). Before forwarding trap to a trapReceiver (manager) agent filters all traps acording to all EFDs defined for this manager. | ||||
| RtrapDiscrimEntry | 1.3.6.1.4.1.1166.7.3.2.4.1 | NA | ||
| CtrapDiscrimTableIndex | 1.3.6.1.4.1.1166.7.3.2.4.1.1 | INTEGER (1..20) | NA | |
column · INTEGER (1..20) · not-accessible · current The index to a trap discriminator entry. | ||||
| CtrapDiscrimReceiverAddr | 1.3.6.1.4.1.1166.7.3.2.4.1.2 | IpAddress | RW | |
column · IpAddress · read-write · current The IP address of the manager this Discrim belongs to. It should be equal to TrapReceiverAddr. NOTE: Changing trapDiscrimReceiverAddr FROM default value to anything else is equivalent of 'creating' of a new entry. Changing trapReceiverAddr TO default value will result in deletion of that entry. | ||||
| CtrapDiscrimAvailabilityStatus | 1.3.6.1.4.1.1166.7.3.2.4.1.3 | INTEGER | RO | |
column · INTEGER · read-only · current This object reflects the current Availability status of the Discrim (based on ISO/IEC 10164-2).
| ||||
| CtrapDiscrimWeeklyMask | 1.3.6.1.4.1.1166.7.3.2.4.1.4 | DisplayString (SIZE (0..7)) | RW | |
column · DisplayString (SIZE (0..7)) · read-write · current This object represents weekly scedule for corresponding Discrim. The WeeklyMask consists of 7 numeric characters (1 for each day of the week). Each numeric character can take a value of either '1' - enabled or '2' - disabled. For example, with WeeklyMask='1122221', an agent will apply corresponding Discriminator only on Mondays, Tuesdays and Sundays. Any characters other than '1' and '2' will be ignored. | ||||
| CtrapDiscrimDailyStartTime | 1.3.6.1.4.1.1166.7.3.2.4.1.5 | INTEGER (0..1439) | RW | |
column · INTEGER (0..1439) · read-write · current This object represents daily start time for corresponding Discrim. The StartTime is expressed as an offset (in minutes) from 2400 hours military time. For example, StartTime=70 represents start time of 1:10 AM. | ||||
| CtrapDiscrimDailyStopTime | 1.3.6.1.4.1.1166.7.3.2.4.1.6 | INTEGER (0..1439) | RW | |
column · INTEGER (0..1439) · read-write · current This object represents daily stop time for corresponding Discrim. The StopTime is expressed as an offset (in minutes) from 2400 hours military time. For example, StopTime=70 represents stop time of 1:10 AM. | ||||
| CtrapSeverityDiscrim | 1.3.6.1.4.1.1166.7.3.2.4.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current The severity threshold of traps to be send to the manager. Only traps of equal or greater severity than this value are sent to the manager.
| ||||
| CtrapDiscrimOperationalState | 1.3.6.1.4.1.1166.7.3.2.4.1.8 | INTEGER | RW | |
column · INTEGER · read-write · current The current Operational State of the Discriminator.
| ||||
| CtrapDiscrimConfigChangeCntl | 1.3.6.1.4.1.1166.7.3.2.4.1.9 | INTEGER | RW | |
column · INTEGER · read-write · current This variable turns reporting of configuration changes on or off.
| ||||
Textual conventions
ConfigChangeActionINTEGERwaitingReboot(3)waitingRetune(1)waitingSave(2)Represents the action required to instantiate configuration change.
ConfigChangeStateINTEGERapplied(2)saved(3)staged(1)Represents the current state of a configuration change