ARRIS-CMTS-FFT-MIB
Arris Interactive LLCThis MIB manages the FFT software on the Arris CMTS
snmptranslate -m ARRIS-CMTS-FFT-MIB -Tpsnmpwalk -v2c -c <community> -m ARRIS-CMTS-FFT-MIB <host> 1.3.6.1.4.1.4115.1.4.5.1Imports
| ARRIS-MIB | cmtsCommon |
|---|---|
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IcmtsFftMIB | 1.3.6.1.4.1.4115.1.4.5.1 | |||
identity This MIB manages the FFT software on the Arris CMTS | ||||
| NdcxFftObjects | 1.3.6.1.4.1.4115.1.4.5.1.1 | |||
| TdcxFftUpstreamChannelTable | 1.3.6.1.4.1.4115.1.4.5.1.1.1 | NA | ||
table · not-accessible · current Arris CMTS FFT upstream channel configuration table. An entry in this table exists for each ifEntry with an ifType of docsCableUpstreamInterface (129) that supports FFT collection and reporting. | ||||
| RdcxFftUpstreamChannelEntry | 1.3.6.1.4.1.4115.1.4.5.1.1.1.1 | NA | ||
| CdcxFftSize | 1.3.6.1.4.1.4115.1.4.5.1.1.1.1.1 | Unsigned32 (256 | 512 | 1024 | 2048 | 4096) | RW | |
column · Unsigned32 (256 | 512 | 1024 | 2048 | 4096) · read-write · current Number of samples to be collected for FFT. Valid values are 256, 512, 1024, 2048, 4096. The FFT payload size will be the number of samples multiplied by the number of bytes per sample as determined by dcxFftOutputFormat. The duration of the FFT sample will be the number of samples divided by the sample rate as determined by dcxFftSampleRate. | ||||
| CdcxFftSampleRate | 1.3.6.1.4.1.4115.1.4.5.1.1.1.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current FFT sample rate based on the input source to the FFT. The input to the FFT can be the ADC output, the ADC output followed by a down-mixer and half-band filter, the ADC output followed by a down-mixer and quarter-band filter, or the received channel's Nyquist filter output.
| ||||
| CdcxFftCentreFrequency | 1.3.6.1.4.1.4115.1.4.5.1.1.1.1.3 | Integer32 (-81920000..81920000) | RW | |
column · Integer32 (-81920000..81920000) · read-write · current FFT centre frequency. This object is used only if dcxFftSampleRate is set to halfAdcRate or quarterAdcRate to set the down-mixer frequency.
| ||||
| CdcxFftWindowing | 1.3.6.1.4.1.4115.1.4.5.1.1.1.1.4 | INTEGER | RW | |
column · INTEGER · read-write · current Set the frequency-domain windowing filter.
| ||||
| CdcxFftLogAveragingTimeConstant | 1.3.6.1.4.1.4115.1.4.5.1.1.1.1.5 | Unsigned32 (0..7) | RW | |
column · Unsigned32 (0..7) · read-write · current Time averaging constant exponent, M. Constant is 2^M. Setting this object to zero disables averaging. | ||||
| CdcxFftOutputFormat | 1.3.6.1.4.1.4115.1.4.5.1.1.1.1.6 | INTEGER | RW | |
column · INTEGER · read-write · current FFT processor output format. Format can be i. raw complex time-domain I/Q format ii. FFT data in I/Q format iii. FFT data in power format iv. FFT data in amplitude format. The sample sizes are 4 bytes (i. - iii.) and 2 bytes (iv.)
| ||||
| CdcxFftOperatingMode | 1.3.6.1.4.1.4115.1.4.5.1.1.1.1.7 | INTEGER | RW | |
column · INTEGER · read-write · current Operating mode of FFT process. Determines whether the FFT measurement takes place while no CMs are transmitting (measuring noise floor), during a CM burst, or by periodically sampling the spectrum without regard to scheduling of the upstream.
| ||||
| CdcxFftIdleInterval | 1.3.6.1.4.1.4115.1.4.5.1.1.1.1.8 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Interval in microseconds between consecutive FFT triggers when dcxFftOperatingMode is baseSpectrum or periodicSpectrum. This object is not used if dcxFftOperatingMode is set to burstSpectrum or if dcxFftTriggerCount is 1. | ||||
| CdcxFftBurstSid | 1.3.6.1.4.1.4115.1.4.5.1.1.1.1.9 | Unsigned32 (0..16383) | RW | |
column · Unsigned32 (0..16383) · read-write · current SID on which to trigger the FFT process. This object is used only if dcxFftOperatingMode is set to burstSpectrum. | ||||
| CdcxFftBurstIUC | 1.3.6.1.4.1.4115.1.4.5.1.1.1.1.10 | INTEGER (0..15) | RW | |
column · INTEGER (0..15) · read-write · current IUC type on which to trigger the FFT process. This object is used only if dcxFftOperatingMode is set to burstSpectrum or periodicSpectrum. A value of 0 means trigger on any IUC type. | ||||
| CdcxFftLogicalChannel | 1.3.6.1.4.1.4115.1.4.5.1.1.1.1.11 | INTEGER (-1..3) | RW | |
column · INTEGER (-1..3) · read-write · current Logical channel on which to trigger the FFT process. This object is used only if dcxFftOperatingMode is set to periodicSpectrum. A value of -1 means trigger on any logical channel. | ||||
| CdcxFftTriggerCount | 1.3.6.1.4.1.4115.1.4.5.1.1.1.1.12 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Number of times to trigger FFT when dcxFftEnable and dcxFftApplyConfig are set to true. Set this object to zero to trigger FFT continuously. | ||||
| CdcxFftEnable | 1.3.6.1.4.1.4115.1.4.5.1.1.1.1.13 | TruthValue | RW | |
column · TruthValue · read-write · current Set to true to enable FFT on this channel. Set to false to disable. Setting will take effect when dcxFftApplyConfig is set to true | ||||
| CdcxFftApplyConfig | 1.3.6.1.4.1.4115.1.4.5.1.1.1.1.14 | TruthValue | RW | |
column · TruthValue · read-write · current Set to true to trigger an FFT process with configuration determined by the other objects in this group. An SNMP GET of this object will always return false | ||||
| CdcxFftInProgress | 1.3.6.1.4.1.4115.1.4.5.1.1.1.1.15 | TruthValue | RO | |
column · TruthValue · read-only · current This object will return true if an FFT process is currently in progress (having been started by a SET to dcxFftApplyConfig) for this upstream channel. Returns false otherwise | ||||
| CdcxFftCurrentTriggers | 1.3.6.1.4.1.4115.1.4.5.1.1.1.1.16 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current Number of FFT triggers since the last FFT process was started. | ||||
| TdcxFftPayloadTable | 1.3.6.1.4.1.4115.1.4.5.1.1.2 | NA | ||
table · not-accessible · current Arris CMTS FFT upstream channel payload table. | ||||
| RdcxFftPayloadEntry | 1.3.6.1.4.1.4115.1.4.5.1.1.2.1 | NA | ||
row · not-accessible · current Arris CMTS FFT upstream channel payload entry. Multiple entries in this table exist for each ifEntry with an ifType of docsCableUpstreamInterface (129) that supports the FFT collection and currently has FFT data to report.
| ||||
| CdcxFftPayloadIndex | 1.3.6.1.4.1.4115.1.4.5.1.1.2.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current An identifier for the 256-byte buffer available at the dcxFftPayloadData object. | ||||
| CdcxFftPayloadData | 1.3.6.1.4.1.4115.1.4.5.1.1.2.1.2 | DcxFftPayloadBuffer | RO | |
column · DcxFftPayloadBuffer · read-only · current The FFT payload data in the buffer identified by dcxFftPayloadIndex. | ||||
Textual conventions
DcxFftPayloadBufferOCTET STRING (SIZE (0..256))A buffer that contains upstream FFT payload data.