ARRIS-CM-DEVICE-MIB
Arris Interactive LLCThis MIB module supplies the basic proprietary (ARRIS-specific) management objects for ARRIS Cable Modem (CM) devices.
snmptranslate -m ARRIS-CM-DEVICE-MIB -Tpsnmpwalk -v2c -c <community> -m ARRIS-CM-DEVICE-MIB <host> 1.3.6.1.4.1.4115.1.3.1Imports
| ARRIS-MIB | arrisProdIdCM |
|---|---|
| DOCS-CABLE-DEVICE-MIB | docsDevEvId, docsDevEvLevel, docsDevEvText |
| DOCS-IF-MIB | docsIfCmCmtsAddress, docsIfCmStatusDocsisOperMode, docsIfCmStatusModulationType, docsIfDocsisBaseCapability |
| IF-MIB | ifPhysAddress |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IarrisCmDevMib | 1.3.6.1.4.1.4115.1.3.1 | |||
identity This MIB module supplies the basic proprietary (ARRIS-specific) management objects for ARRIS Cable Modem (CM) devices. | ||||
| NarrisCmDevMibObjects | 1.3.6.1.4.1.4115.1.3.1.1 | |||
| NarrisCmDevBase | 1.3.6.1.4.1.4115.1.3.1.1.1 | |||
| SarrisCmDevWanIsolationState | 1.3.6.1.4.1.4115.1.3.1.1.1.1 | INTEGER | RW | |
scalar · INTEGER · read-write · current The object controls the state of WAN Isolation. The meaning of the state is as follows: off-InActiveMode(1) - Data traffic passes freely between the home user's network and the outside network (i.e. the Internet). In this mode, the WAN Isolation state is considered 'InActive'. on-ActiveMode(2) - The home user's network is isolated from the Internet. Data traffic will not pass between the home user's network and the Internet. In this mode, the WAN Isolation state is considered 'Active'. off-InActiveMode-ButtonDisabled(3) - Data traffic passes freely between the home user's network and the outside network (i.e. the Internet). In this mode, the WAN Isolation state is considered 'InActive'. Also the button is disabled so the end user cannot change the state. on-ActiveMode-ButtonDisabled(4) - The home user's network is isolated from the Internet. Data traffic will not pass between the home user's network and the Internet. In this mode, the WAN Isolation state is considered 'Active'. Also the button is disabled so the end user cannot change the state.
| ||||
| SarrisCmDevSwImageName | 1.3.6.1.4.1.4115.1.3.1.1.1.2 | DisplayString | RO | |
scalar · DisplayString · read-only · current The name of the software image currently operating on this device. | ||||
| SarrisCmDevSwImageBuildTime | 1.3.6.1.4.1.4115.1.3.1.1.1.3 | DisplayString | RO | |
scalar · DisplayString · read-only · current The build date and time of the software image currently operating on this device. | ||||
| SarrisCmDevRangeDelay | 1.3.6.1.4.1.4115.1.3.1.1.1.4 | INTEGER | RO | |
scalar · INTEGER · read-only · current Reports range delay value in use by the modem. This value can be adjusted by the CMTS through the periodic ranging process. This MIB is provided to enable MSOs to determine when a modem has undergone a significant change in range delay. | ||||
| NarrisCmDevDhcp | 1.3.6.1.4.1.4115.1.3.1.1.1.5 | |||
| NarrisCmDevDhcpCmParameters | 1.3.6.1.4.1.4115.1.3.1.1.1.5.1 | |||
| SarrisCmDevDhcpCmIpAddr | 1.3.6.1.4.1.4115.1.3.1.1.1.5.1.1 | IpAddress | RO | deprecated |
scalar · IpAddress · read-only · deprecated This object is deprecated. See arrisCmDevDhcpCmIpAddrV6 for its replacement. This displays the currently leased IP address . | ||||
| SarrisCmDevDhcpCmSubNetMask | 1.3.6.1.4.1.4115.1.3.1.1.1.5.1.2 | IpAddress | RO | |
scalar · IpAddress · read-only · current This displays the current IP subnet mask in use. | ||||
| SarrisCmDevDhcpCmGatewayIpAddr | 1.3.6.1.4.1.4115.1.3.1.1.1.5.1.3 | IpAddress | RO | |
scalar · IpAddress · read-only · current This displays the current IP gateway address in use. | ||||
| SarrisCmDevDhcpCmConfigFile | 1.3.6.1.4.1.4115.1.3.1.1.1.5.1.4 | SnmpAdminString | RO | |
scalar · SnmpAdminString · read-only · current This displays the CM configuration file to be retrieved. | ||||
| SarrisCmDevDhcpIpMode | 1.3.6.1.4.1.4115.1.3.1.1.1.5.1.5 | InetAddressType | RO | |
scalar · InetAddressType · read-only · current This displays the current DHCP IP address mode,ipv4 or ipv6. | ||||
| SarrisCmDevDhcpCmIpAddrV6 | 1.3.6.1.4.1.4115.1.3.1.1.1.5.1.6 | InetAddress | RO | |
scalar · InetAddress · read-only · current This displays the currently leased IPv6 address . | ||||
| SarrisCmDevDhcpCmSubNetMaskV6 | 1.3.6.1.4.1.4115.1.3.1.1.1.5.1.7 | Integer32 | RO | |
scalar · Integer32 · read-only · current This displays the current IPv6 subnet mask in use. | ||||
| SarrisCmDevDhcpCmGatewayIpAddrV6 | 1.3.6.1.4.1.4115.1.3.1.1.1.5.1.8 | InetAddress | RO | |
scalar · InetAddress · read-only · current This displays the current IPv6 gateway address in use. | ||||
| NarrisCmDevDhcpSvrParameters | 1.3.6.1.4.1.4115.1.3.1.1.1.5.2 | |||
| SarrisCmDevDhcpState | 1.3.6.1.4.1.4115.1.3.1.1.1.5.2.1 | INTEGER | RO | |
scalar · INTEGER · read-only · current This displays the current Dhcp state of the CM.
| ||||
| SarrisCmDevDhcpPrimaryDhcpServerIpAddr | 1.3.6.1.4.1.4115.1.3.1.1.1.5.2.2 | IpAddress | RO | |
scalar · IpAddress · read-only · current This displays the primary Dhcp server address. | ||||
| SarrisCmDevDhcpTftpSvrIpAddr | 1.3.6.1.4.1.4115.1.3.1.1.1.5.2.3 | IpAddress | RO | |
scalar · IpAddress · read-only · current This displays the current Tftp Server IP address in use. | ||||
| SarrisCmDevDhcpTimeSvrIpAddr | 1.3.6.1.4.1.4115.1.3.1.1.1.5.2.4 | IpAddress | RO | |
scalar · IpAddress · read-only · current This displays the current Time server IP address in use. | ||||
| SarrisCmDevDhcpCmTimeOffset | 1.3.6.1.4.1.4115.1.3.1.1.1.5.2.5 | Integer32 | RO | |
scalar · Integer32 · read-only · current This displays the current Time offset being used by the CM. | ||||
| SarrisCmDevDhcpPrimaryTeleDhcpSvr | 1.3.6.1.4.1.4115.1.3.1.1.1.5.2.6 | IpAddress | RO | |
scalar · IpAddress · read-only · current This displays the current Time offset being used by the CM. | ||||
| SarrisCmDevDhcpSecondaryTeleDhcpSvr | 1.3.6.1.4.1.4115.1.3.1.1.1.5.2.7 | IpAddress | RO | |
scalar · IpAddress · read-only · current This displays the current Time offset being used by the CM. | ||||
| SarrisCmDevDhcpPrimaryDhcpServerIpAddrV6 | 1.3.6.1.4.1.4115.1.3.1.1.1.5.2.8 | InetAddress | RO | |
scalar · InetAddress · read-only · current This displays the primary Dhcp server IPv6 address. | ||||
| SarrisCmDevDhcpTftpSvrIpAddrV6 | 1.3.6.1.4.1.4115.1.3.1.1.1.5.2.9 | InetAddress | RO | |
scalar · InetAddress · read-only · current This displays the current Tftp Server IPv6 address in use. | ||||
| SarrisCmDevDhcpTimeSvrIpAddrV6 | 1.3.6.1.4.1.4115.1.3.1.1.1.5.2.10 | InetAddress | RO | |
scalar · InetAddress · read-only · current This displays the current Time server IPv6 address in use. | ||||
| NarrisCmDevDhcpLeaseParameters | 1.3.6.1.4.1.4115.1.3.1.1.1.5.3 | |||
| SarrisCmDevDhcpOfferedLeaseTime | 1.3.6.1.4.1.4115.1.3.1.1.1.5.3.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current This displays the Offered IP Lease time expressed in seconds. | ||||
| SarrisCmDevDhcpLeaseTimeRemaining | 1.3.6.1.4.1.4115.1.3.1.1.1.5.3.2 | Integer32 | RO | |
scalar · Integer32 · read-only · current This displays the Remaining IP Lease time expressed in seconds. | ||||
| SarrisCmDevDhcpTimeUntilRenew | 1.3.6.1.4.1.4115.1.3.1.1.1.5.3.3 | Integer32 | RO | |
scalar · Integer32 · read-only · current This displays the current time remaining before the MTA starts the lease renewal process. This time is expressed in seconds. | ||||
| SarrisCmDevDhcpTimeUntilRebind | 1.3.6.1.4.1.4115.1.3.1.1.1.5.3.4 | Integer32 | RO | |
scalar · Integer32 · read-only · current This displays the current time remaining before the CM starts the lease rebinding process. This time is expressed in seconds. | ||||
| SarrisCmDevRegistrationState | 1.3.6.1.4.1.4115.1.3.1.1.1.6 | INTEGER | RO | |
scalar · INTEGER · read-only · current The last registration step completed as the E-MTA provisioning progresses through the DOCSIS/PacketCable registration and provisioning steps.
| ||||
| NarrisCmDevResetReasonLog | 1.3.6.1.4.1.4115.1.3.1.1.1.7 | |||
| SarrisCmDevLastHwResetReason | 1.3.6.1.4.1.4115.1.3.1.1.1.7.1 | DisplayString | RO | |
scalar · DisplayString · read-only · current The last reset reason retrieved from the actual processor HW. This reason is used to determine if the HW or FW caused the reset. The majority of the time this reset will indicate that the FW reset the device. It should be noted that this reason is not stored off and will show only the last reason for the HW to reset. | ||||
| TarrisCmDevResetReasonLogTable | 1.3.6.1.4.1.4115.1.3.1.1.1.7.2 | NA | ||
table · not-accessible · current This table contains the last 10 reset reasons. | ||||
| RarrisCmDevResetReasonLogEntry | 1.3.6.1.4.1.4115.1.3.1.1.1.7.2.1 | NA | ||
row · not-accessible · current This table contains the last 10 reset reasons. | ||||
| CarrisCmDevResetReasonLogIndex | 1.3.6.1.4.1.4115.1.3.1.1.1.7.2.1.1 | INTEGER (1..10) | NA | |
column · INTEGER (1..10) · not-accessible · current Index used to report log reasons. | ||||
| CarrisCmDevResetReasonLogText | 1.3.6.1.4.1.4115.1.3.1.1.1.7.2.1.2 | DisplayString | RO | |
column · DisplayString · read-only · current The reported reset reason log text. | ||||
| SarrisCmDevResetReasonLogDisable | 1.3.6.1.4.1.4115.1.3.1.1.1.7.3 | TruthValue | RW | |
scalar · TruthValue · read-write · current Disables the storage of the reset reasons to the Reset Reasons
LOG table thus saving writes to NVM. This will default to false(2)
allowing the logging to occur.
NOTE: This value can only be modified via the CM Config file. Manual
SNMP sets will return NOT_WRITABLE error code. | ||||
| SarrisCmDevDualModeDiscoveredMarket | 1.3.6.1.4.1.4115.1.3.1.1.1.8 | INTEGER | RO | |
scalar · INTEGER · read-only · current This MIB object reports the Dual Mode Discovered Market from the CM.
| ||||
| NarrisCmDevCmSetup | 1.3.6.1.4.1.4115.1.3.1.1.2 | |||
| NarrisCmDevPermanentSetup | 1.3.6.1.4.1.4115.1.3.1.1.2.2 | |||
| NarrisCmDevOperationalSetup | 1.3.6.1.4.1.4115.1.3.1.1.2.3 | |||
| SarrisCmDevProvMethodIndicator | 1.3.6.1.4.1.4115.1.3.1.1.2.3.2 | ArrsCmDevProvMethod | RW | deprecated |
scalar · ArrsCmDevProvMethod · read-write · deprecated Indicates the method used to provision the device. This object should only be
changed by the configuration file. The following provisioning methods are supported:
docsisOnly(0) - DOCSIS-only provisioning
fullPacketCable(1) - fully PacketCable compliant provisioning
packetCableMinusKDC(2) - same as 'fullPacketCable', except with IPSEC and
SNMPv3 disabled
cps(3) - compatible with CPS2000 (SNMPv2; IPSEC disabled)
gupi(4) - SNMPv2, with no SNMP Informs and IPSEC disabled
singleMAC(5) - single config file (SNMPv2, single IP address,
single MAC address, no SNMP Informs, IPSEC disabled
basic1(6) - SNMPv2, without the SNMP Enrollment and Status Informs
basic2(7) - SNMPv2, without the SNMP Enrollment Inform)
gupiEncryptedMtaConfig(8) - Same a gupi(4) above with the MTA config file encrypted
useing an Arris proprietary method.
gupiMacMta(9) - gupi provisioning that uses MTA MAC address as the MTA config
file name. (ie- 1337c0ded00d.bin)
gupiEncryptedMacMta(10) - gupi encrypted mta config provisioning that uses MTA MAC address
as the MTA config file name. (ie- 1337c0ded00d.bin)
gupiTftpSvrOverride(11) - gupi provisioning where the FQDN of the MTA TFTP server is expected to
be present in the MIB arrisMtaDevTFTPServerAddrOverrideFQDN | ||||
| SarrisCmDevEnableDocsis20 | 1.3.6.1.4.1.4115.1.3.1.1.2.3.3 | TruthValue | RW | |
scalar · TruthValue · read-write · current This object is used to enable/disable DOCSIS 2.0 operation mode. This object is stored into NVRAM and will be operational after the next reboot of the device. Set to true(1) to enable DOCSIS 2.0 operation mode. Set to false(2) to disable DOCSIS 2.0 operation mode. Setting this object to the same value that is already stored in NVRAM will do nothing. After the successful setting of this object, the device will automatically reboot. | ||||
| SarrisCmDevModemFeatureSwitch | 1.3.6.1.4.1.4115.1.3.1.1.2.3.4 | Bits | RW | |
scalar · Bits · read-write · current This object is used to enable proprietary features of the Arris cable
modem. From left to right, the specified bit indicates whether or not
the corresponding modem feature is enabled. For example, if the first
bit is set, then the badMapDiscard feature is enabled. If it is zero,
the feature is disabled. NO bits are set by default.
/** BIT Descriptions **/
0x80 : badMapDiscard - if Set, bad Maps will be discarded.
0x40 : wanIsolationOverride - if Set, the WAN isolation switch will be
overriden. Internet access will remain enabled regardless of
the position of the WAN isolation switch (Standby button).
0x20 : usbDisable - if Set, the USB hardware will be disabled.
0x10 : concatDisable - if Set, concatenation and fragmentation will
be disabled when operating with a 1.0 config file.
0x08 : octetCounterChange - if Set, SYNC and MAP messages are not
counted in the ifInOctets MIB.
0x04 : RESERVED
0x02 : RESERVED
0x01 : Unused
| ||||
| NarrisCmDevHttp | 1.3.6.1.4.1.4115.1.3.1.1.2.3.5 | |||
| SarrisCmDevHttpLanAccess | 1.3.6.1.4.1.4115.1.3.1.1.2.3.5.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current Controls the level of LAN-side HTTP access to the modem.
The levels are described as:
off(1) - LAN-side HTTP access is denied.
basic(2) - allow basic HTTP access.
advanced(3) - allow ARRIS proprietary HTTP access; not valid for CM.
until-registered(4) - allow basic HTTP access until the
modem is registered. Once registered,
LAN-side HTTP access is denied.
This object can only be changed by the configuration file.
The default value for this object is until-registered(4).
| ||||
| SarrisCmDevHttpWanAccess | 1.3.6.1.4.1.4115.1.3.1.1.2.3.5.4 | INTEGER | RW | |
scalar · INTEGER · read-write · current Controls the level of WAN-side HTTP access to the modem. The levels are described as: off(1) - WAN-side HTTP access is denied. basic(2) - allow basic HTTP access. advanced(3) - allow ARRIS proprietary HTTP access; not valid for CM. This object can only be changed by the configuration file. The default value for this object is off(1).
| ||||
| SarrisCmDevHttpClientSeed | 1.3.6.1.4.1.4115.1.3.1.1.2.3.5.5 | OCTET STRING (SIZE (8)) | RW | |
scalar · OCTET STRING (SIZE (8)) · read-write · current The DES encoded seed--provided by the user--that will be used to generate the password for access to the HTTP Advanced Pages. When read, this object will return a zero-length string. | ||||
| SarrisCmDevHttpAdvLink | 1.3.6.1.4.1.4115.1.3.1.1.2.3.5.6 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object provides the ability to show or hide the ADV link on the HTTP Web Page.
| ||||
| NarrisCmDevTurboDoxConfiguration | 1.3.6.1.4.1.4115.1.3.1.1.2.3.6 | |||
| SarrisCmDevTurboDoxEnable | 1.3.6.1.4.1.4115.1.3.1.1.2.3.6.3 | TruthValue | RW | |
scalar · TruthValue · read-write · current This object is used to enable/disable TurboDox operation. Set to true(1) to enable TurboDox operation mode. Set to false(2) to disable TurboDox operation mode. This object can only be changed by the configuration file. | ||||
| SarrisCmDevTurboDoxDeleteTimer | 1.3.6.1.4.1.4115.1.3.1.1.2.3.6.4 | INTEGER (1..65535) | RW | |
scalar · INTEGER (1..65535) · read-write · current This object represents the TCP session delete timeout value. This object can only be changed by the configuration file. The default value for this object is 15.
| ||||
| SarrisCmDevTurboDoxSlowStartTimer | 1.3.6.1.4.1.4115.1.3.1.1.2.3.6.5 | INTEGER (1..65535) | RW | |
scalar · INTEGER (1..65535) · read-write · current This object represents the TCP slow start timeout value. This object can only be changed by the configuration file. The default value for this object is 10.
| ||||
| SarrisCmDevTurboDoxVersion | 1.3.6.1.4.1.4115.1.3.1.1.2.3.6.6 | DisplayString (SIZE (0..15)) | RO | |
scalar · DisplayString (SIZE (0..15)) · read-only · current This object indicates the TurboDox version. | ||||
| SarrisCmDevDhcpServerEnable | 1.3.6.1.4.1.4115.1.3.1.1.2.3.7 | TruthValue | RW | |
scalar · TruthValue · read-write · current This object is used to enable/disable the local DHCP Server. As long as the CM is not operational, the local DHCP Server is working if enabled. Set to true(1) to enable the DHCP server. Set to false(2) to disable it. | ||||
| SarrisCmDevDhcpServerState | 1.3.6.1.4.1.4115.1.3.1.1.2.3.8 | INTEGER | RO | |
scalar · INTEGER · read-only · current Indicates the current state of the local DHCP Server.
| ||||
| NarrisCmDevScanningSetup | 1.3.6.1.4.1.4115.1.3.1.1.2.3.9 | |||
| TarrisCmDevPresetFrequencyTable | 1.3.6.1.4.1.4115.1.3.1.1.2.3.9.1 | NA | ||
table · not-accessible · current This table contains all the MIB variables required for Preset Frequency Scanning. | ||||
| RarrisCmDevPresetFrequencyEntry | 1.3.6.1.4.1.4115.1.3.1.1.2.3.9.1.1 | NA | ||
row · not-accessible · current This table contains all the MIB variables required for Preset Frequency Scanning. | ||||
| CarrisCmDevPresetFrequencyIndex | 1.3.6.1.4.1.4115.1.3.1.1.2.3.9.1.1.1 | INTEGER (1..20) | NA | |
column · INTEGER (1..20) · not-accessible · current Index used to order the arrisCmDevPresetFrequencyTable entries. | ||||
| CarrisCmDevPresetFrequency | 1.3.6.1.4.1.4115.1.3.1.1.2.3.9.1.1.2 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Preset Frequency used in scanning. This value should be entered in Hz (Hertz). | ||||
| SarrisCmDevClearPresetFrequencies | 1.3.6.1.4.1.4115.1.3.1.1.2.3.9.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current If set to True(1), the device will erase all the Preset frequencies. When read False(2) will always be returned
| ||||
| SarrisCmDevClearCachedFrequencies | 1.3.6.1.4.1.4115.1.3.1.1.2.3.9.3 | INTEGER | RW | |
scalar · INTEGER · read-write · current If set to True(1), the device will erase all the Cached frequencies. When read False(2) will always be returned
| ||||
| SarrisCmDevReportLevelsMasterOff | 1.3.6.1.4.1.4115.1.3.1.1.2.3.10 | TruthValue | RW | |
scalar · TruthValue · read-write · current If set to True(1) all Report Levels and Debug Tracing will be turned Off, and Logits Logs will return to thier default values. When this object is read False(2) will be returned. | ||||
| SarrisCmDevEraseLogBlock | 1.3.6.1.4.1.4115.1.3.1.1.2.3.11 | TruthValue | RW | |
scalar · TruthValue · read-write · current If set to True(1) this MIB object will erase the Arris log block. When this object is read False(2) will be returned. | ||||
| SarrisCmDevEnableDocsis10Plus | 1.3.6.1.4.1.4115.1.3.1.1.2.3.12 | TruthValue | RW | |
scalar · TruthValue · read-write · current This object is used to enable/disable DOCSIS 1.0+ operational mode. This setting is stored into NVRAM and therefore will survive resets. Set to true(1) to enable DOCSIS 1.0+ operational mode. In this mode the modem will register as a DOCSIS 1.0 device and will use DOCSIS 1.0+ functionality rather than DOCSIS 1.1 or DOCSIS 2.0. Set to false(2) to disable DOCSIS 1.0+ operational mode. In this mode the modem will register and perform as a DOCSIS 1.1 or DOCSIS 2.0 device rather than using DOCSIS 1.0+. | ||||
| SarrisCmDevEnableOption177 | 1.3.6.1.4.1.4115.1.3.1.1.2.3.13 | TruthValue | RW | |
scalar · TruthValue · read-write · current This object is used to enable/disable sending only DHCP option 177 rather than sending both option 122 and 177. This setting is stored into NVRAM and therefore will survive resets. Set to true(1) to enable sending only option 177. In this mode the modem will report support only for option 177. Set to false(2) to disable sending only option 177. In this mode the modem will report support for both options 122 and 177 in its DHCP DISCOVER message. | ||||
| SarrisCmDevEnableLoggingPersistence | 1.3.6.1.4.1.4115.1.3.1.1.2.3.14 | TruthValue | RW | |
scalar · TruthValue · read-write · current This object is used to enable/disable the telnet logging persistence feature. This setting is stored into NVRAM and therefore will survive resets. Set to true(1) to enable logging persistence. In this mode, exiting a telnet session will leave all debug logging enabled. Set to false(2) to disable logging persistence. In this mode, exiting a telnet session will cause all debug logging to be turned off. | ||||
| SarrisCmDevModemFeatureSwitch2 | 1.3.6.1.4.1.4115.1.3.1.1.2.3.15 | Bits | RW | |
scalar · Bits · read-write · current This object is used to enable proprietary features of the Arris cable
modem. From left to right, the specified bit indicates whether or not
the corresponding modem feature is enabled. For example, if the first
bit is set, then the disableTftpTimeoutOption feature is enabled. If
it is zero, the feature is disabled. NO bits are set by default.
Field is 32 bits long and all 32 bits must be written.
/** BIT Descriptions **/
0x80000000 : disableTftpTimeoutOption - Turn off timeout opt in TFTP
0x40000000 : enableBroadcastDhcpProtection - Turn on broadcast DHCP filtering for CPE devices
0x20000000 : allowCpeOverflowWrap - Turn on to allow wrapping of CPE MAC learning table
0x10000000 : wrmMaxCPEBypass - deprecated - WRM MAC address is not counted against the MaxCpeAllowed variable.
0x08000000 : dectMaxCPEBypass - deprecated - DECT MAC address is not counted against the MaxCpeAllowed variable.
0x04000000 : disableWrmFactDefaultButton - when set, holding WRM reset button for >8 seconds does NOT revert WRM to factory defaults.
0x02000000 : resetMtaTicketsOnProvisioningTimerExpiry - Turn on to allow security tickets to be invalidated when MTA provisioning timer expires.
0x01000000 : disableMtaDHCPOption60SupportedCodecs - when set, DHCP option 60 won't include supported codecs.
0x00800000 : replaceMtaDHCPOption12HostnameWithMtaMac - when set, ignore Option 12 hostname never mind it's exist or not.
The Option 12 hostname will be set to MTA's MAC.
0x00400000 : keepCpeOnIfDisconnect - Turn on to keep the MAC address of the disconnected CPE.
0x00200000 : ignoreSigDevToneProvisioning - Turn on to ignore SigDevTone provisioning.
0x00100000 : Reserved for Future.
0x00080000 : Reserved for Future.
0x00040000 : Reserved for Future.
0x00020000 : Reserved for Future.
0x00010000 : Reserved for Future.
0x00008000 : Reserved for Future.
0x00004000 : Reserved for Future.
0x00002000 : Reserved for Future.
0x00001000 : Reserved for Future.
0x00000800 : Reserved for Future.
0x00000400 : Reserved for Future.
0x00000200 : Reserved for Future.
0x00000100 : Reserved for Future.
0x00000080 : Reserved for Future.
0x00000040 : Reserved for Future.
0x00000020 : Reserved for Future.
0x00000010 : Reserved for Future.
0x00000008 : Reserved for Future.
0x00000004 : Reserved for Future.
0x00000002 : Reserved for Future.
0x00000001 : Reserved for Future.
| ||||
| SarrisCmDevDocsQosParamSetActiveTimeout | 1.3.6.1.4.1.4115.1.3.1.1.2.3.16 | INTEGER (0..65535) | RW | |
scalar · INTEGER (0..65535) · read-write · current Send QOS Timeout parameter to CMTS for upstream flow IF feature switch for DSX DQOS is enabled AND the value of this MIB is set to a value other than the default of 0. | ||||
| SarrisCmDevCLITimeout | 1.3.6.1.4.1.4115.1.3.1.1.2.3.17 | Unsigned32 | RW | |
scalar · Unsigned32 · read-write · current Max time that a telnet/SSH session can be idle before it is terminated. Range is 0-1440 minutes, where 0 disables the timer completely. | ||||
| SarrisCmDevTODSyncTimeOut | 1.3.6.1.4.1.4115.1.3.1.1.2.3.18 | Unsigned32 (0..4320) | RW | |
scalar · Unsigned32 (0..4320) · read-write · current This value determines the interval between the TOD sync operations. Range is 0-4320 hours, where 0 disables the sync completely. This value sets the interval starting from the setting of the new value. Hence, a setting of 10 causes the TOD server to sync every 10 hours from the time the value was set. Feature is disabled by default. | ||||
| SarrisCmDevDhcpNoSvcImpact | 1.3.6.1.4.1.4115.1.3.1.1.2.3.19 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object is used to enable/disable the DHCP RENEW interruption feature. During an active call DHCP lease renewal will be stalled until all endpoints are onhook. Set to off(1) to disable DHCP lease renewal interruption. DHCP lease renewal will adhere to normal operating procedures. Set to dontSend(2) to enable complete DHCP lease renewal interruption. When an endpoint is offhook the DHCP RENEW or REBIND REQUEST will be suppressed until all endpoints are returned to the onhook condition. Set to sendIgnore(3) to enable partial DHCP lease renewal interruption. When an endpoint is offhook the DHCP RENEW or REBIND REQUEST will be sent and a valid DHCP ACK RESPONSE will be processed. However, a DHCP NAK RESPONSE will not be processed until all endpoints are returned to the onhook condition, then the NAK will be processed immediately.
| ||||
| SarrisCmDevDhcpOption51Override | 1.3.6.1.4.1.4115.1.3.1.1.2.3.20 | INTEGER | RW | |
scalar · INTEGER · read-write · current Enable or Disable the inclusion of DHCP option code 51 in the DHCP REQUEST message. A value of off(1) will cause DHCP option code 51 to be included in the DHCP REQUEST message. A value of onCm(2) will cause DHCP option code 51 to NOT be included in the CM DHCP REQUEST message. A value of onMta(3) will cause DHCP option code 51 to NOT be included in the MTA DHCP REQUEST message. A value of onCmAndMta(4) will cause DHCP option code 51 to NOT be included in both the CM and the MTA DHCP REQUEST message. The default value is off(1).
| ||||
| SarrisCmDevDEAControl | 1.3.6.1.4.1.4115.1.3.1.1.2.3.21 | INTEGER | RW | |
scalar · INTEGER · read-write · current Turn on or off the DEA algorithm. The default value is on(1).
| ||||
| SarrisCmDevSinglePasswd | 1.3.6.1.4.1.4115.1.3.1.1.2.3.22 | DisplayString | RW | |
scalar · DisplayString · read-write · current The encoded password--provided by the user--that will be used for single password access to the CLI & HTTP Advanced Pages. When read, this object will return a zero-length string. | ||||
| SarrisCmDevTelnetEnable | 1.3.6.1.4.1.4115.1.3.1.1.2.3.23 | INTEGER | RW | |
scalar · INTEGER · read-write · current Used to enable/disable Telnet access. TempEnable enables Telnet for one session only. For Telnet to be enabled, arrisCmDevTelnetAllow must also be set to 'allow'.
| ||||
| SarrisCmDevSSHEnable | 1.3.6.1.4.1.4115.1.3.1.1.2.3.24 | INTEGER | RW | |
scalar · INTEGER · read-write · current Used to enable/disable SSH access. TempEnable enables SSH for one session only. For SSH to be enabled, arrisCmDevSSHAllow must also be set to 'allow'.
| ||||
| SarrisCmDevTelnetAllow | 1.3.6.1.4.1.4115.1.3.1.1.2.3.25 | INTEGER | RW | |
scalar · INTEGER · read-write · current Used to allow/inhibit Telnet access. For Telnet to be allowed, arrisCmDevTelnetEnable must also be set to 'enable'.
| ||||
| SarrisCmDevSSHAllow | 1.3.6.1.4.1.4115.1.3.1.1.2.3.26 | INTEGER | RW | |
scalar · INTEGER · read-write · current Used to allow/inhibit SSH access. For SSH to be allowed, arrisCmDevSSHEnable must also be set to 'enable'.
| ||||
| SarrisCmDevWirelessRegion | 1.3.6.1.4.1.4115.1.3.1.1.2.3.27 | INTEGER | RW | |
scalar · INTEGER · read-write · current This value specifies the region that the modem operates in so it can determine the range of channels which may be selected by the user for 802.11 operation. This value only affects modems that support 802.11. If this value is not specified, standard DOCSIS units will default to United States, Japanese DOCSIS units will default to Japan, and EuroDOCSIS units will default to Europe.
| ||||
| SarrisCmDevRouterMode | 1.3.6.1.4.1.4115.1.3.1.1.2.3.28 | INTEGER | RW | |
scalar · INTEGER · read-write · current This value specifies what operating mode should be used by the embedded router in Touchstone products that include a router. If not specified, the router will be left in its existing configuration. 0: Leave router configuration unchanged from existing setting 1: All router functionality is enabled 2: All router functionality is disabled, modem acts as simple bridge 3: All router functionality is disabled, modem acts as simple bridge, and all router configuration web pages are removed from the webGUI so that the end user cannot change this
| ||||
| SarrisCmDevEnableDHCPLog | 1.3.6.1.4.1.4115.1.3.1.1.2.3.29 | INTEGER | RW | |
scalar · INTEGER · read-write · current Used to enable/disable CM DHCP Logging.
| ||||
| SarrisCmDevClearDHCPLog | 1.3.6.1.4.1.4115.1.3.1.1.2.3.30 | INTEGER | RW | |
scalar · INTEGER · read-write · current Used to Clear the CM DHCP Logs.
| ||||
| SarrisCmDevRouterLanIpAddr | 1.3.6.1.4.1.4115.1.3.1.1.2.3.31 | IpAddress | RW | |
scalar · IpAddress · read-write · current This is the current Router Lan IP address. | ||||
| SarrisCmDevRouterLanSubNetMask | 1.3.6.1.4.1.4115.1.3.1.1.2.3.32 | IpAddress | RW | |
scalar · IpAddress · read-write · current This is the current Router Lan Subnet Mask. | ||||
| SarrisCmDevRouterLanEnable | 1.3.6.1.4.1.4115.1.3.1.1.2.3.33 | INTEGER | RW | |
scalar · INTEGER · read-write · current Used to enable/disable Router Lan.
| ||||
| SarrisCmDevRouterLanReset | 1.3.6.1.4.1.4115.1.3.1.1.2.3.34 | TruthValue | RW | |
scalar · TruthValue · read-write · current Setting this object to true(1) will reset the Router Lan Setting this object to false(2) will do nothing. Reading this object always returns false(2). | ||||
| SarrisCmDevRipTransmitStatus | 1.3.6.1.4.1.4115.1.3.1.1.2.3.35 | INTEGER | RO | |
scalar · INTEGER · read-only · current Active when the RIP on puma is actively transmitting RIP updates. In order for arrisCmDevRipTransmitStatus to be active, arrisCmDevRouterLanEnable must be enabled, and all RIP parameters must be configured correctly.
| ||||
| SarrisCmDevDectReset | 1.3.6.1.4.1.4115.1.3.1.1.2.3.36 | TruthValue | RW | |
scalar · TruthValue · read-write · current Setting this object to true(1) will reset the Dect module Setting this object to false(2) will do nothing. Reading this object always returns false(2). | ||||
| SarrisCmDevTftpBlkSize | 1.3.6.1.4.1.4115.1.3.1.1.2.3.37 | Integer32 | RW | |
scalar · Integer32 · read-write · current This object is used for the TFTP Blocksize Option (RFC 2348). Valid values range between 32 and 1448 octets, inclusive. Setting this object to 0(default) disables this option, and a 512 blksize is used as per TFTP spec. | ||||
| SarrisCmDevTODTimeOffset | 1.3.6.1.4.1.4115.1.3.1.1.2.3.38 | Integer32 (-43200..46800) | RW | |
scalar · Integer32 (-43200..46800) · read-write · current This mib is used to update CM TOD time offset. The range of the offset is -12*60*60(-43200) to 13*60*60(46800) in seconds. 13 is Daylight Savings Time in the +12 time zone). The CM TOD time offset is overwritten when this mib is set or CM dhcp time offset option is received. | ||||
| SarrisCmDevWrmProvServer | 1.3.6.1.4.1.4115.1.3.1.1.2.3.39 | IpAddress | RW | |
scalar · IpAddress · read-write · current This object is used to store the TFTP Server Name for the WRM card if it cannot be included in the DHCP Offer. | ||||
| SarrisCmDevWrmProvFileName | 1.3.6.1.4.1.4115.1.3.1.1.2.3.40 | DisplayString | RW | |
scalar · DisplayString · read-write · current This object is used to store the Bootfile name for the WRM card if it cannot be included in the DHCP Offer. | ||||
| SarrisCmDevDSTPolicy | 1.3.6.1.4.1.4115.1.3.1.1.2.3.41 | DisplayString (SIZE (0..50)) | RW | |
scalar · DisplayString (SIZE (0..50)) · read-write · current This object is used to get and set the daylight saving time policy. This parameter is a rule with two fields separated by semicolon (;) as shown below: start=<start-time>;end=<end-time> <start-time> and <end-time> are of the form: <month>/<day>/<weekday>/<HH> <month> = 1,2,12 (for Jan, Feb, Dec) <day> = [+|-]1,2,3,...,,31. If <day> is -1, it means the <weekday> on or before the end-of-the-month (in other words the last occurrence of <weekday> in that month) <weekday> = 1, 2, 3,..., 7 (for Mon, Tue, ..., Sun), or 0. If <weekday> is 0, it means the date to start or end daylight saving is at exactly the given date. In that case, the <day> value must not be negative. If <weekday> is not zero, then the daylight saving starts or ends on the <weekday> on or after the given date if <day> is positive, or on or before the given date if <day> is negative. <HH> = hour (0-23). The following example reflects the new change starting March 2007 in U.S.A. DST starts on the second Sunday in March and ends on the first Sunday in November: start=3/8/7/02;end=11/1/7/02 | ||||
| SarrisCmDevRestoreNvmFactoryDefault | 1.3.6.1.4.1.4115.1.3.1.1.2.3.42 | TruthValue | RW | |
scalar · TruthValue · read-write · current Setting this object to true(1) will reset the NVM to default values: Setting this object to false(2) will do nothing. Reading this object always returns false(2). | ||||
| SarrisCmDevWrmProvFile | 1.3.6.1.4.1.4115.1.3.1.1.2.3.43 | OCTET STRING (SIZE (0..2048)) | RW | |
scalar · OCTET STRING (SIZE (0..2048)) · read-write · current This object is used to store the Bootfile for the WRM card if it cannot be provisioned by the usual TFTP server. | ||||
| SarrisCmDevUGSTxQueueSize | 1.3.6.1.4.1.4115.1.3.1.1.2.3.44 | INTEGER | RW | |
scalar · INTEGER · read-write · current Controls the permitted depth of HW upstream buffer queue for UGS service flows. Packets are discarded if depth of queue exceeds this setting. A setting of disable (0) indicates that the queue will not be restricted, and will be allowed to fill to allocated size.The recommended queue size is 2.
| ||||
| SarrisCmDevUniqueConfigFileEnable | 1.3.6.1.4.1.4115.1.3.1.1.2.3.45 | INTEGER | RW | |
scalar · INTEGER · read-write · current Used to enable/disable downloading the ARRIS unique config file. Default value is set to 'disable'. This MIB can only be set via the CM config file, but sets will be ignored if CM is working in IPV6 mode.
| ||||
| SarrisCmDevUniqueConfigFileServerAddrType | 1.3.6.1.4.1.4115.1.3.1.1.2.3.46 | InetAddressType | RW | |
scalar · InetAddressType · read-write · current This object is used to get and set the IP address mode of the TFTP server for the ARRIS unique config file. This MIB can only be set via the CM config file, and only IPV4 address type is accepted. This MIB should be set before setting 'arrisCmDevUniqueConfigFileServerAddr'. | ||||
| SarrisCmDevUniqueConfigFileServerAddr | 1.3.6.1.4.1.4115.1.3.1.1.2.3.47 | InetAddress | RW | |
scalar · InetAddress · read-write · current This object is used to get and set the TFTP server address that will be used to download the ARRIS unique config file. This MIB can only be set via the CM config file, and only a IPV4 address is accepted. 'arrisCmDevUniqueConfigFileServerAddrType'should be set to correct value before setting this MIB. | ||||
| SarrisCmDevSetupMddIpModeOverride | 1.3.6.1.4.1.4115.1.3.1.1.2.3.48 | INTEGER | RW | |
scalar · INTEGER · read-write · current This object is used to override the IP Mode TLV in the MDD message. 0 = use the MDD value 1 = IPv4 Only 2 = IPv6 Only 3 = Alternate (APM) 4 = Dual-stack (DPM)
| ||||
| SarrisCmDevWrmProvFileNameMacEnable | 1.3.6.1.4.1.4115.1.3.1.1.2.3.49 | INTEGER | RW | |
scalar · INTEGER · read-write · current When Enabled in the CM configuration file, and the MIB value of arrisCmDevWrmProvFileName is blank, the CM would generate the MIB rrisCmDevWrmProvFileName to be the WAN MAC address cfg file. Note: This MIB could only be set in CM configuration file
| ||||
| SarrisCmDevTftpMtaIpOverride | 1.3.6.1.4.1.4115.1.3.1.1.2.3.50 | IpAddress | RW | |
scalar · IpAddress · read-write · current This object is used to store the TFTP Server IP Address and it will override the DHCP Offer. | ||||
| SarrisCmDevEthernetPower | 1.3.6.1.4.1.4115.1.3.1.1.2.3.51 | INTEGER | RW | |
scalar · INTEGER · read-write · current off(0) - power off Ethernet interface. on(1) - power on Ethernet interface default(2) - power off Ethernet interface for CM600, power on Ethernet interface for other models.
| ||||
| NarrisCmDevSalesSetup | 1.3.6.1.4.1.4115.1.3.1.1.2.4 | |||
| NarrisCmDevCmTest | 1.3.6.1.4.1.4115.1.3.1.1.3 | |||
| NarrisCmDevManufacturingTest | 1.3.6.1.4.1.4115.1.3.1.1.3.2 | |||
| NarrisCmDevOperationalTest | 1.3.6.1.4.1.4115.1.3.1.1.3.3 | |||
| NarrisCmDevSoftware | 1.3.6.1.4.1.4115.1.3.1.1.4 | |||
| TarrisCmDevSwTable | 1.3.6.1.4.1.4115.1.3.1.1.4.1 | NA | ||
table · not-accessible · current This table contains all the MIB variables required for the Touchstone Software Upgrade System. | ||||
| RarrisCmDevSwEntry | 1.3.6.1.4.1.4115.1.3.1.1.4.1.1 | NA | ||
row · not-accessible · current This table contains all the MIB variables required for the Touchstone Software Upgrade System.
| ||||
| CarrisCmDevSwIndex | 1.3.6.1.4.1.4115.1.3.1.1.4.1.1.1 | INTEGER (1..32) | NA | |
column · INTEGER (1..32) · not-accessible · current Index used to order the arrisCmDevSwTable entries. | ||||
| CarrisCmDevSwCustomerLoadId | 1.3.6.1.4.1.4115.1.3.1.1.4.1.1.2 | DisplayString (SIZE (0..64)) | RW | |
column · DisplayString (SIZE (0..64)) · read-write · current Custom string to identify Touchstone Software Upgrade load lineups. (OPTIONAL) | ||||
| CarrisCmDevSwHwModel | 1.3.6.1.4.1.4115.1.3.1.1.4.1.1.3 | DisplayString (SIZE (0..16)) | RW | |
column · DisplayString (SIZE (0..16)) · read-write · current HW Model of Touchstone product to be downloaded. (REQUIRED) | ||||
| CarrisCmDevSwHwRev | 1.3.6.1.4.1.4115.1.3.1.1.4.1.1.4 | INTEGER (0..255) | RW | |
column · INTEGER (0..255) · read-write · current HW Revision of Touchstone product to be downloaded. (OPTIONAL) | ||||
| CarrisCmDevSwServer | 1.3.6.1.4.1.4115.1.3.1.1.4.1.1.5 | IpAddress | RW | deprecated |
column · IpAddress · read-write · deprecated The address of the TFTP server used for software upgrades. If the TFTP server is unknown or is a non-IPv4 address, return 0.0.0.0. This object is deprecated. See arrisCmDevSwServerAddress for its replacement. This object will have its value modified, given a valid SET to arrisCmDevSwServerAddress. | ||||
| CarrisCmDevSwFilename | 1.3.6.1.4.1.4115.1.3.1.1.4.1.1.6 | DisplayString (SIZE (0..64)) | RW | |
column · DisplayString (SIZE (0..64)) · read-write · current The file name of the Touchstone software image to be loaded on to this device. (REQUIRED) | ||||
| CarrisCmDevSwServerAddressType | 1.3.6.1.4.1.4115.1.3.1.1.4.1.1.8 | InetAddressType | RW | |
column · InetAddressType · read-write · current This get/set IP address mode of the server for Touchstone Software Upgrading,ipv4 or ipv6. (REQUIRED) | ||||
| CarrisCmDevSwServerAddress | 1.3.6.1.4.1.4115.1.3.1.1.4.1.1.9 | InetAddress | RW | |
column · InetAddress · read-write · current This object is used to get/set the IPv6 or IPv4 TFTP server address that will be used to download the image. A set of this object to an IPv4 address will result in also setting the value of arrisCmDevSwServer to that address. If this object is set to an IPv6 address, arrisCmDevSwServer is set to 0.0.0.0. If arrisCmDevSwServer is set, this object is also set to that value. Note that before setting this object, setting arrisCmDevSwServerAddressType to a correct value is a must. (REQUIRED) | ||||
| SarrisCmDevSwAdminStatus | 1.3.6.1.4.1.4115.1.3.1.1.4.2 | INTEGER | RW | |
scalar · INTEGER · read-write · current If set to upgradeFromArrisMgt(1), the device will initiate a TFTP software image download using arrisCmDevSwFilename for the matching HW model type and revision in the arrisCmDevSwTable. If set to allowArrisProvisioningUpgrade(2), the device will use the Touchstone Software Upgrade information supplied by the provisioning server when next rebooting (this does not cause a reboot). When set to ignoreArrisProvisioningUpgrade(3), the device will disregard Touchstone Software Upgrade information from the provisioning server. At initial startup, this object has the default value of ignoreArrisProvisioningUpgrade(3).
| ||||
| NarrisCmDevNotification | 1.3.6.1.4.1.4115.1.3.1.10 | |||
| NarrisCmDevTraps | 1.3.6.1.4.1.4115.1.3.1.10.0 | |||
| !arrisCmDevTftpDownloadInitTrap | 1.3.6.1.4.1.4115.1.3.1.10.0.2 | |||
notification · current An event that indicates a TFTP download initiated request. The values of docsDevEvLevel, docsDevId, and docsDevEvText are from the entry which logs this event in the docsDevEventTable. The docsIfDocsisBaseCapability value indicates the DOCSIS version information. The docsIfCmStatusDocsisOperMode value indicates the QOS level of the CM, while the docsIfCmStatusModulationType indicates the upstream modulation methodology used by the CM. The ifPhysAddress value is the MAC address of the cable interface of this cable modem. The docsIfCmCmtsAddress specifies the MAC address of the CMTS to which the CM is connected (if there is a cable card/ interface in the CMTS, then it is actually the MAC address of the cable interface which connected to the CM). This part of the trap information is uniform across all CM traps. | ||||
| !arrisCmDevTftpDownloadCompleteTrap | 1.3.6.1.4.1.4115.1.3.1.10.0.3 | |||
notification · current An event that indicates the TFTP download completed successfully. | ||||
| !arrisCmDevTftpDownloadFailTrap | 1.3.6.1.4.1.4115.1.3.1.10.0.4 | |||
notification · current An event that indicates the failure of the TFTP download attempt. | ||||
| !arrisCmDevTftpDownloadRetryTrap | 1.3.6.1.4.1.4115.1.3.1.10.0.5 | |||
notification · current An event that indicates a TFTP download retry attempt. | ||||
| !arrisCmDevMtaCertificateValidationFailTrap | 1.3.6.1.4.1.4115.1.3.1.10.0.6 | |||
notification · current An event that indicates a Service Provider Certificate Chain Validation Failed. | ||||
| !arrisCmDevSoftwareUpgradeFailedBeforeDLTrap | 1.3.6.1.4.1.4115.1.3.1.10.0.8 | |||
notification · current An event that indicates the Software Upgrade Failed before downloading. | ||||
| !arrisCmDevSoftwareUpgradeFailedTrap | 1.3.6.1.4.1.4115.1.3.1.10.0.9 | |||
notification · current An event that indicates the Software Upgrade Failed. | ||||
| !arrisCmDevSoftwareUpgradeCompleteTrap | 1.3.6.1.4.1.4115.1.3.1.10.0.10 | |||
notification · current An event that indicates the Software Upgrade was Completed. | ||||
| !arrisCmDevSoftwareUpgradeAbortedACFailTrap | 1.3.6.1.4.1.4115.1.3.1.10.0.11 | |||
notification · current An event that indicates the Software Upgrade was Aborted due to battery AC-FAIL condition. | ||||
Textual conventions
ArrsCmDevProvMethodINTEGERbasic1(6)basic2(7)cps(3)docsisOnly(0)fullPacketCable(1)gupi(4)gupiEncryptedMacMta(10)gupiEncryptedMtaConfig(8)gupiMacMta(9)gupiTftpSvrOverride(11)packetCableMinusKDC(2)singleMAC(5)These are the various provisioning methods that are supported by the device.
Traps / Notifications
- arrisCmDevMtaCertificateValidationFailTrap
1.3.6.1.4.1.4115.1.3.1.10.0.6 - arrisCmDevSoftwareUpgradeAbortedACFailTrap
1.3.6.1.4.1.4115.1.3.1.10.0.11 - arrisCmDevSoftwareUpgradeCompleteTrap
1.3.6.1.4.1.4115.1.3.1.10.0.10 - arrisCmDevSoftwareUpgradeFailedBeforeDLTrap
1.3.6.1.4.1.4115.1.3.1.10.0.8 - arrisCmDevSoftwareUpgradeFailedTrap
1.3.6.1.4.1.4115.1.3.1.10.0.9 - arrisCmDevTftpDownloadCompleteTrap
1.3.6.1.4.1.4115.1.3.1.10.0.3 - arrisCmDevTftpDownloadFailTrap
1.3.6.1.4.1.4115.1.3.1.10.0.4 - arrisCmDevTftpDownloadInitTrap
1.3.6.1.4.1.4115.1.3.1.10.0.2 - arrisCmDevTftpDownloadRetryTrap
1.3.6.1.4.1.4115.1.3.1.10.0.5