ARISTA-NEXTHOP-GROUP-MIB
Arista Networks, Inc. (formerly 'Arastra, Inc.')This MIB contains information about NextHop Groups (NHG).
General L3 routing creates routing table entries, each of
which are associated with a nexthop. If multiple paths
exist for a specific route, the route points to a set of
nexthops (commonly referred as ECMP or Equal Cost
MultiPath).
Arista devices support a feature which allows customers to
manually create a nexthop list, and use this list to
route packets to the specified set of nexthop
addresses. Customers can associate a tunnel type (GRE,
for example) with the nexthop group, allowing relevant
packets to be tunneled as well. The packet forwarding or
routing decision happens in hardware.
Nexthop group feature gives customers full control of how
a route should be forwarded (tunneled or otherwise). The
number of entries in the nexthop group is also determined
by the user, and directly translates to the number of
nexthop entries in the hardware for the specified route.
Let's provide an example, looking at EOS CLI example.
nexthop-group foo type ip-in-ip
ttl 64
entry 0 tunnel-destination 10.1.1.1
entry 1 tunnel-destination 20.1.1.1
!
ip route 30.1.1.0/24 Nexthop-Group foo
In the above configuration, any packet destined to
30.1.1.0/24 will be forwarded by the nexthop group
'foo'. Each entry inside the nexthop group specifies a
particular nexthop ('tunnel destination') chosen by the
customer. In this example, packets can be forwarded via
either of the nexthop (traffic split equally between the 2
entries).
This MIB module provides information relevant to the
nexthop group feature, specifically the status of various
nexthop groups configured, and traffic statistics.snmptranslate -m ARISTA-NEXTHOP-GROUP-MIB -Tpsnmpwalk -v2c -c <community> -m ARISTA-NEXTHOP-GROUP-MIB <host> 1.3.6.1.4.1.30065.3.21Imports
| ARISTA-SMI-MIB | aristaMibs |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IaristaNexthopGroupMIB | 1.3.6.1.4.1.30065.3.21 | |||
identity This MIB contains information about NextHop Groups (NHG).
General L3 routing creates routing table entries, each of
which are associated with a nexthop. If multiple paths
exist for a specific route, the route points to a set of
nexthops (commonly referred as ECMP or Equal Cost
MultiPath).
Arista devices support a feature which allows customers to
manually create a nexthop list, and use this list to
route packets to the specified set of nexthop
addresses. Customers can associate a tunnel type (GRE,
for example) with the nexthop group, allowing relevant
packets to be tunneled as well. The packet forwarding or
routing decision happens in hardware.
Nexthop group feature gives customers full control of how
a route should be forwarded (tunneled or otherwise). The
number of entries in the nexthop group is also determined
by the user, and directly translates to the number of
nexthop entries in the hardware for the specified route.
Let's provide an example, looking at EOS CLI example.
nexthop-group foo type ip-in-ip
ttl 64
entry 0 tunnel-destination 10.1.1.1
entry 1 tunnel-destination 20.1.1.1
!
ip route 30.1.1.0/24 Nexthop-Group foo
In the above configuration, any packet destined to
30.1.1.0/24 will be forwarded by the nexthop group
'foo'. Each entry inside the nexthop group specifies a
particular nexthop ('tunnel destination') chosen by the
customer. In this example, packets can be forwarded via
either of the nexthop (traffic split equally between the 2
entries).
This MIB module provides information relevant to the
nexthop group feature, specifically the status of various
nexthop groups configured, and traffic statistics. | ||||
| NaristaNexthopGroupMibObjects | 1.3.6.1.4.1.30065.3.21.1 | |||
| TaristaNexthopGroupTable | 1.3.6.1.4.1.30065.3.21.1.1 | NA | ||
table · not-accessible · current This table contains information about the nexthop groups that are present in the device. | ||||
| RaristaNexthopGroupEntry | 1.3.6.1.4.1.30065.3.21.1.1.1 | NA | ||
row · not-accessible · current A conceptual row, containing information for a specific nexthop group.
| ||||
| CaristaNexthopGroupId | 1.3.6.1.4.1.30065.3.21.1.1.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current Unique index identifying a nexthop group. | ||||
| CaristaNexthopGroupName | 1.3.6.1.4.1.30065.3.21.1.1.1.2 | NexthopGroupName | RO | |
column · NexthopGroupName · read-only · current Unique name identifying a nexthop group. | ||||
| CaristaNexthopGroupType | 1.3.6.1.4.1.30065.3.21.1.1.1.3 | NexthopGroupType | RO | |
column · NexthopGroupType · read-only · current The type of the nexthop group. The encapsulation information provided for each entry in the nexthop group corresponds to the type. | ||||
| TaristaNexthopGroupCounterTable | 1.3.6.1.4.1.30065.3.21.1.2 | NA | ||
table · not-accessible · current Each nexthop group contains several entries - each entry specifies a particular nexthop through which a packet can be forwarded. There is packet and byte counter information associated with each such nexthop. This table represents the per nexthop counter information for every nexthop group. | ||||
| RaristaNexthopGroupCounterEntry | 1.3.6.1.4.1.30065.3.21.1.2.1 | NA | ||
row · not-accessible · current A conceptual row, containing counter information for every nexthop defined inside the nexthop group. | ||||
| CaristaNexthopGroupEntryIndex | 1.3.6.1.4.1.30065.3.21.1.2.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current As described in the beginning of the MIB module each nexthop group can have multiple entries, one per 'destination' or 'nexthop'. Each entry within a nexthop group has a number or index as configured by the user. This MIB object represents the entry index within the nexthop group. | ||||
| CaristaNexthopGroupCounterIndex | 1.3.6.1.4.1.30065.3.21.1.2.1.2 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current For every nexthop within a nexthop group, packet and byte counters are maintained by the device. Counters can be shared by multiple such nexthops and the counter index will be the same for all of those nexthops. | ||||
| CaristaNexthopGroupCounterPacketCount | 1.3.6.1.4.1.30065.3.21.1.2.1.3 | Counter64 | RO | |
column · Counter64 · read-only · current The number of packets forwarded through the specific nexthop. Note that since counters are shared with multiple nexthops, the packet count is an aggregate of packets forwarded through all the relevant nexthops. | ||||
| CaristaNexthopGroupCounterByteCount | 1.3.6.1.4.1.30065.3.21.1.2.1.4 | Counter64 | RO | |
column · Counter64 · read-only · current The byte count of packets forwarded through the specific nexthop. Note that since counters are shared with multiple nexthops, the byte count is an aggregate of packets forwarded through all the relevant nexthops. | ||||
| NaristaNexthopGroupMibConformance | 1.3.6.1.4.1.30065.3.21.2 | |||
| NaristaNexthopGroupMibCompliances | 1.3.6.1.4.1.30065.3.21.2.1 | |||
| MaristaNexthopGroupMibCompliance | 1.3.6.1.4.1.30065.3.21.2.1.1 | |||
compliance · current The compliance statement for Arista switches that implement the ARISTA-NEXTHOP-GROUP-MIB. | ||||
| NaristaNexthopGroupMibGroups | 1.3.6.1.4.1.30065.3.21.2.2 | |||
| GaristaNexthopGroupGroup | 1.3.6.1.4.1.30065.3.21.2.2.1 | |||
group · current The collection of objects that provide nexthop group information in the system. | ||||
| GaristaNexthopGroupCounterGroup | 1.3.6.1.4.1.30065.3.21.2.2.2 | |||
group · current The collection of objects that provide counter information for every nexthop in the nexthop group. | ||||
Textual conventions
NexthopGroupNameOCTET STRING (SIZE (0..255))Display hint:
255aEach nexthop group configured by the user is associated with a name, by configuration.
NexthopGroupTypeINTEGERgre(2)invalid(0)ip(4)ipInIp(1)mpls(3)mplsOverGre(5)A nexthop group is associated with a type, which determines the packet forwarding behavior. Type 'ip' refers to L3 IP routing. A route pointing to a nexthop group in this case is equivalent to multiple static route configuration entries each with a particular nexthop. Types 'gre', 'mpls', 'ip-in-ip' all refer to tunnel types. In this case a route pointing to the specified nexthop group is used to tunnel packets using the appropriate encapsulation to a tunnel destination. The encapsulation information depends on the tunnel type itself.