ALTEON-TS-PHYSICAL-MIB
Alteon Networks, Inc.snmptranslate -m ALTEON-TS-PHYSICAL-MIB -Tpsnmpwalk -v2c -c <community> -m ALTEON-TS-PHYSICAL-MIB <host> 1.3.6.1.4.1.1872.2.1.18Imports
| ALTEON-ROOT-MIB | switch |
|---|---|
| ALTEON-TIGON-SWITCH-MIB | agent, information, operCmds, stats |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| NagPortConfig | 1.3.6.1.4.1.1872.2.1.2.3 | |||
| SagPortTableMaxEnt | 1.3.6.1.4.1.1872.2.1.2.3.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The maximum number of rows in the port configuration host table. | ||||
| TagPortCurCfgTable | 1.3.6.1.4.1.1872.2.1.2.3.2 | NA | mandatory | |
table · not-accessible · mandatory The table of port configuration in the current_configuration block. | ||||
| RagPortCurCfgTableEntry | 1.3.6.1.4.1.1872.2.1.2.3.2.1 | NA | mandatory | |
row · not-accessible · mandatory A row in the port table in the current_configuration block.
| ||||
| CagPortCurCfgIndx | 1.3.6.1.4.1.1872.2.1.2.3.2.1.1 | INTEGER (1..255) | RO | mandatory |
column · INTEGER (1..255) · read-only · mandatory The index of the row in port configurations table. | ||||
| CagPortCurCfgPrefLink | 1.3.6.1.4.1.1872.2.1.2.3.2.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This is the preferred link.
| ||||
| CagPortCurCfgBackLink | 1.3.6.1.4.1.1872.2.1.2.3.2.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This is the backup link.
| ||||
| CagPortCurCfgState | 1.3.6.1.4.1.1872.2.1.2.3.2.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This is the state of the port.
| ||||
| CagPortCurCfgVlanTag | 1.3.6.1.4.1.1872.2.1.2.3.2.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This is VLAN tag state of the port
| ||||
| CagPortCurCfgStp | 1.3.6.1.4.1.1872.2.1.2.3.2.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This object is used to turn Spanning Tree on or off for the port.
| ||||
| CagPortCurCfgRmon | 1.3.6.1.4.1.1872.2.1.2.3.2.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This object is used to turn RMON on or off on the port.
| ||||
| CagPortCurCfgPVID | 1.3.6.1.4.1.1872.2.1.2.3.2.1.8 | INTEGER (1..4094) | RO | mandatory |
column · INTEGER (1..4094) · read-only · mandatory The default VLAN ID for the port. | ||||
| CagPortCurCfgFastEthAutoNeg | 1.3.6.1.4.1.1872.2.1.2.3.2.1.9 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This object is used to turn the autonegotiation on or off for fast Ethernet connection.
| ||||
| CagPortCurCfgFastEthSpeed | 1.3.6.1.4.1.1872.2.1.2.3.2.1.10 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Selects the port speed for fast Ethernet connection.
| ||||
| CagPortCurCfgFastEthMode | 1.3.6.1.4.1.1872.2.1.2.3.2.1.11 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This object is used to select port mode for fast Ethernet connection.
| ||||
| CagPortCurCfgFastEthFctl | 1.3.6.1.4.1.1872.2.1.2.3.2.1.12 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Selects the port flow control for fast Ethernet connection.
| ||||
| CagPortCurCfgGigEthAutoNeg | 1.3.6.1.4.1.1872.2.1.2.3.2.1.13 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This object is used to turn the autonegotiation on or off for gigabit Ethernet connection.
| ||||
| CagPortCurCfgGigEthFctl | 1.3.6.1.4.1.1872.2.1.2.3.2.1.14 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This object is used to select port flow control for gigabit Ethernet connection.
| ||||
| CagPortCurCfgPortName | 1.3.6.1.4.1.1872.2.1.2.3.2.1.15 | DisplayString (SIZE (0..63)) | RO | mandatory |
column · DisplayString (SIZE (0..63)) · read-only · mandatory The switch port name. | ||||
| CagPortCurCfgBwmContract | 1.3.6.1.4.1.1872.2.1.2.3.2.1.16 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The switch port Bandwidth Management contract number. | ||||
| CagPortCurCfgDiscardNonIPs | 1.3.6.1.4.1.1872.2.1.2.3.2.1.17 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Enable or disable to discard all non-IP traffic on the switch port.
| ||||
| CagPortCurCfgLinkTrap | 1.3.6.1.4.1.1872.2.1.2.3.2.1.18 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise.
| ||||
| TagPortNewCfgTable | 1.3.6.1.4.1.1872.2.1.2.3.3 | NA | mandatory | |
table · not-accessible · mandatory The table of port configuration in the new_configuration block. | ||||
| RagPortNewCfgTableEntry | 1.3.6.1.4.1.1872.2.1.2.3.3.1 | NA | mandatory | |
row · not-accessible · mandatory A row in the port configuration table in the new_configuration block.
| ||||
| CagPortNewCfgIndx | 1.3.6.1.4.1.1872.2.1.2.3.3.1.1 | INTEGER (1..255) | RO | mandatory |
column · INTEGER (1..255) · read-only · mandatory The index of the row in port configurations table. | ||||
| CagPortNewCfgPrefLink | 1.3.6.1.4.1.1872.2.1.2.3.3.1.2 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This is the preferred link.
| ||||
| CagPortNewCfgBackLink | 1.3.6.1.4.1.1872.2.1.2.3.3.1.3 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This is the backup link.
| ||||
| CagPortNewCfgState | 1.3.6.1.4.1.1872.2.1.2.3.3.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This is the state of the port.
| ||||
| CagPortNewCfgVlanTag | 1.3.6.1.4.1.1872.2.1.2.3.3.1.5 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This is VLAN tag state of the port
| ||||
| CagPortNewCfgStp | 1.3.6.1.4.1.1872.2.1.2.3.3.1.6 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object is used to turn Spanning Tree on or off for the port.
| ||||
| CagPortNewCfgRmon | 1.3.6.1.4.1.1872.2.1.2.3.3.1.7 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object is used to turn RMON on or off on the port.
| ||||
| CagPortNewCfgPVID | 1.3.6.1.4.1.1872.2.1.2.3.3.1.8 | INTEGER (1..4094) | RW | mandatory |
column · INTEGER (1..4094) · read-write · mandatory The default VLAN ID for the port. | ||||
| CagPortNewCfgFastEthAutoNeg | 1.3.6.1.4.1.1872.2.1.2.3.3.1.9 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object is used to turn the autonegotiation on or off for fast Ethernet connection.
| ||||
| CagPortNewCfgFastEthSpeed | 1.3.6.1.4.1.1872.2.1.2.3.3.1.10 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Selects the port speed for fast Ethernet connection.
| ||||
| CagPortNewCfgFastEthMode | 1.3.6.1.4.1.1872.2.1.2.3.3.1.11 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object is used to select port mode for fast Ethernet connection.
| ||||
| CagPortNewCfgFastEthFctl | 1.3.6.1.4.1.1872.2.1.2.3.3.1.12 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Selects the port flow control for fast Ethernet connection.
| ||||
| CagPortNewCfgGigEthAutoNeg | 1.3.6.1.4.1.1872.2.1.2.3.3.1.13 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object is used to turn the autonegotiation on or off for gigabit Ethernet connection.
| ||||
| CagPortNewCfgGigEthFctl | 1.3.6.1.4.1.1872.2.1.2.3.3.1.14 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This object is used to select port flow control for gigabit Ethernet connection.
| ||||
| CagPortNewCfgPortName | 1.3.6.1.4.1.1872.2.1.2.3.3.1.15 | DisplayString (SIZE (0..63)) | RW | mandatory |
column · DisplayString (SIZE (0..63)) · read-write · mandatory The switch port name. | ||||
| CagPortNewCfgBwmContract | 1.3.6.1.4.1.1872.2.1.2.3.3.1.16 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The switch port Bandwidth Management contract number. | ||||
| CagPortNewCfgDiscardNonIPs | 1.3.6.1.4.1.1872.2.1.2.3.3.1.17 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Enable or disable to discard all non-IP traffic on the switch port.
| ||||
| CagPortNewCfgLinkTrap | 1.3.6.1.4.1.1872.2.1.2.3.3.1.18 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object should have the value enabled(1) for interfaces which do not operate on 'top' of any other interface (as defined in the ifStackTable), and disabled(2) otherwise.
| ||||
| Nvlans | 1.3.6.1.4.1.1872.2.1.4 | |||
| SvlanMaxEnt | 1.3.6.1.4.1.1872.2.1.4.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The maximum number of rows in the VLAN configuration table. | ||||
| TvlanCurCfgTable | 1.3.6.1.4.1.1872.2.1.4.2 | NA | mandatory | |
table · not-accessible · mandatory The table of VLAN configuration. | ||||
| RvlanCurCfgTableEntry | 1.3.6.1.4.1.1872.2.1.4.2.1 | NA | mandatory | |
| CvlanCurCfgVlanId | 1.3.6.1.4.1.1872.2.1.4.2.1.1 | INTEGER (1..4094) | RO | mandatory |
column · INTEGER (1..4094) · read-only · mandatory The VLAN identifier. | ||||
| CvlanCurCfgVlanName | 1.3.6.1.4.1.1872.2.1.4.2.1.2 | DisplayString (SIZE (0..32)) | RO | mandatory |
column · DisplayString (SIZE (0..32)) · read-only · mandatory The VLAN name. | ||||
| CvlanCurCfgPorts | 1.3.6.1.4.1.1872.2.1.4.2.1.3 | OCTET STRING (SIZE (0..16)) | RO | mandatory |
column · OCTET STRING (SIZE (0..16)) · read-only · mandatory The port list in the VLAN. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VLAN
0 - The represented port does not belong to the VLAN | ||||
| CvlanCurCfgState | 1.3.6.1.4.1.1872.2.1.4.2.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Enable or disable a VLAN
| ||||
| CvlanCurCfgJumbo | 1.3.6.1.4.1.1872.2.1.4.2.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Enable or Disable the Jumbo frame support for the VLAN
| ||||
| CvlanCurCfgBwmContract | 1.3.6.1.4.1.1872.2.1.4.2.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Default contract number the VLAN | ||||
| CvlanCurCfgStg | 1.3.6.1.4.1.1872.2.1.4.2.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The Spanning Tree Group for the VLAN. | ||||
| TvlanNewCfgTable | 1.3.6.1.4.1.1872.2.1.4.3 | NA | mandatory | |
table · not-accessible · mandatory The table of VLAN configuration. | ||||
| RvlanNewCfgTableEntry | 1.3.6.1.4.1.1872.2.1.4.3.1 | NA | mandatory | |
| CvlanNewCfgVlanId | 1.3.6.1.4.1.1872.2.1.4.3.1.1 | INTEGER (1..4094) | RO | mandatory |
column · INTEGER (1..4094) · read-only · mandatory The VLAN identifier. | ||||
| CvlanNewCfgVlanName | 1.3.6.1.4.1.1872.2.1.4.3.1.2 | DisplayString (SIZE (0..32)) | RW | mandatory |
column · DisplayString (SIZE (0..32)) · read-write · mandatory The VLAN name. | ||||
| CvlanNewCfgPorts | 1.3.6.1.4.1.1872.2.1.4.3.1.3 | OCTET STRING (SIZE (0..16)) | RO | mandatory |
column · OCTET STRING (SIZE (0..16)) · read-only · mandatory The port list in the VLAN. The ports are presented in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the VLAN
0 - The represented port does not belong to the VLAN | ||||
| CvlanNewCfgState | 1.3.6.1.4.1.1872.2.1.4.3.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Enable or disable a VLAN
| ||||
| CvlanNewCfgJumbo | 1.3.6.1.4.1.1872.2.1.4.3.1.5 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Enable or Disable the Jumbo frame support for the VLAN
| ||||
| CvlanNewCfgAddPort | 1.3.6.1.4.1.1872.2.1.4.3.1.6 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The port to be added to the specified VLAN. A '0' value is returned when read. | ||||
| CvlanNewCfgRemovePort | 1.3.6.1.4.1.1872.2.1.4.3.1.7 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The port to be removed from the specified VLAN. A '0' value is returned when read. | ||||
| CvlanNewCfgDelete | 1.3.6.1.4.1.1872.2.1.4.3.1.8 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory This is an action object to create or delete a VLAN. other(1) is returned always when read. The following values are writable: delete(2)...to delete a VLAN
| ||||
| CvlanNewCfgBwmContract | 1.3.6.1.4.1.1872.2.1.4.3.1.9 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Default contract number for the VLAN. | ||||
| CvlanNewCfgStg | 1.3.6.1.4.1.1872.2.1.4.3.1.10 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The Spanning Tree Group for the VLAN. | ||||
| Nportmirroring | 1.3.6.1.4.1.1872.2.1.6 | |||
| SpmCurCfgMonitoringPort | 1.3.6.1.4.1.1872.2.1.6.1 | INTEGER | RO | obsolete |
scalar · INTEGER · read-only · obsolete The port number of the monitoring port. | ||||
| SpmNewCfgMonitoringPort | 1.3.6.1.4.1.1872.2.1.6.2 | INTEGER | RW | obsolete |
scalar · INTEGER · read-write · obsolete The port number of the monitoring port. | ||||
| SpmCurCfgMirroredPort | 1.3.6.1.4.1.1872.2.1.6.3 | INTEGER | RO | obsolete |
scalar · INTEGER · read-only · obsolete The port number of the mirrored port. | ||||
| SpmNewCfgMirroredPort | 1.3.6.1.4.1.1872.2.1.6.4 | INTEGER | RW | obsolete |
scalar · INTEGER · read-write · obsolete The port number of the mirrored port. | ||||
| SpmCurCfgMonitoredTraffic | 1.3.6.1.4.1.1872.2.1.6.5 | INTEGER | RO | obsolete |
scalar · INTEGER · read-only · obsolete The type of traffic to be monitored with respect to the mirrored port.
| ||||
| SpmNewCfgMonitoredTraffic | 1.3.6.1.4.1.1872.2.1.6.6 | INTEGER | RW | obsolete |
scalar · INTEGER · read-write · obsolete The type of traffic to be monitored with respect to the mirrored port.
| ||||
| SpmCurCfgState | 1.3.6.1.4.1.1872.2.1.6.7 | INTEGER | RO | obsolete |
scalar · INTEGER · read-only · obsolete The state of Port mirroring.
| ||||
| SpmNewCfgState | 1.3.6.1.4.1.1872.2.1.6.8 | INTEGER | RW | obsolete |
scalar · INTEGER · read-write · obsolete The state of Port mirroring.
| ||||
| SpmCurCfgTimeout | 1.3.6.1.4.1.1872.2.1.6.9 | INTEGER (0..86400) | RO | obsolete |
scalar · INTEGER (0..86400) · read-only · obsolete The mirroring timeout value in seconds. | ||||
| SpmNewCfgTimeout | 1.3.6.1.4.1.1872.2.1.6.10 | INTEGER (0..86400) | RW | obsolete |
scalar · INTEGER (0..86400) · read-write · obsolete The mirroring timeout value in seconds. | ||||
| Ntrunkgroup | 1.3.6.1.4.1.1872.2.1.7 | |||
| StrunkGroupTableMaxSize | 1.3.6.1.4.1.1872.2.1.7.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The maximum number of entries in trunk group table. | ||||
| TtrunkGroupCurCfgTable | 1.3.6.1.4.1.1872.2.1.7.2 | NA | mandatory | |
table · not-accessible · mandatory The table of trunk group configuration. | ||||
| RtrunkGroupCurCfgTableEntry | 1.3.6.1.4.1.1872.2.1.7.2.1 | NA | mandatory | |
row · not-accessible · mandatory A row in the trunk group configuration table. | ||||
| CtrunkGroupCurCfgIndex | 1.3.6.1.4.1.1872.2.1.7.2.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The identifier of the trunk group. | ||||
| CtrunkGroupCurCfgPorts | 1.3.6.1.4.1.1872.2.1.7.2.1.2 | OCTET STRING (SIZE (0..16)) | RO | mandatory |
column · OCTET STRING (SIZE (0..16)) · read-only · mandatory The port list in the trunk group. The ports are presented in
bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trunk group
0 - The represented port does not belong to the trunk group | ||||
| CtrunkGroupCurCfgState | 1.3.6.1.4.1.1872.2.1.7.2.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Enable or disable a trunk group.
| ||||
| CtrunkGroupCurCfgBwmContract | 1.3.6.1.4.1.1872.2.1.7.2.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Default BW contract of a trunk group. | ||||
| TtrunkGroupNewCfgTable | 1.3.6.1.4.1.1872.2.1.7.3 | NA | mandatory | |
table · not-accessible · mandatory The table of trunk group configuration. | ||||
| RtrunkGroupNewCfgTableEntry | 1.3.6.1.4.1.1872.2.1.7.3.1 | NA | mandatory | |
row · not-accessible · mandatory A row in the trunk group configuration table. | ||||
| CtrunkGroupNewCfgIndex | 1.3.6.1.4.1.1872.2.1.7.3.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The identifier of the trunk group. | ||||
| CtrunkGroupNewCfgPorts | 1.3.6.1.4.1.1872.2.1.7.3.1.2 | OCTET STRING (SIZE (0..16)) | RO | mandatory |
column · OCTET STRING (SIZE (0..16)) · read-only · mandatory The port list in the trunk group. The ports are presented
in bitmap format.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ port 8
|| ||
|| ||___ port 7
|| |____ port 6
|| . . .
||_________ port 1
|__________ reserved
where x : 1 - The represented port belongs to the trunk group
0 - The represented port does not belong to the trunk group | ||||
| CtrunkGroupNewCfgAddPort | 1.3.6.1.4.1.1872.2.1.7.3.1.3 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The port to be added in the trunk group. When read, 0 is returned. | ||||
| CtrunkGroupNewCfgRemovePort | 1.3.6.1.4.1.1872.2.1.7.3.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The port to be deleted from the trunk group. when read, 0 is returned. | ||||
| CtrunkGroupNewCfgState | 1.3.6.1.4.1.1872.2.1.7.3.1.5 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Enable or disable a trunk group.
| ||||
| CtrunkGroupNewCfgDelete | 1.3.6.1.4.1.1872.2.1.7.3.1.6 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Setting the value to delete(2) will delete the entire row. When read, other(1) is returned.
| ||||
| CtrunkGroupNewCfgBwmContract | 1.3.6.1.4.1.1872.2.1.7.3.1.7 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Default BW contract of a trunk group. | ||||
| NportCpuStats | 1.3.6.1.4.1.1872.2.1.8.17 | |||
| TportCpuStatsUtilTable | 1.3.6.1.4.1.1872.2.1.8.17.1 | NA | mandatory | |
table · not-accessible · mandatory The table of port CPU utilization. | ||||
| RportCpuStatsUtilTableEntry | 1.3.6.1.4.1.1872.2.1.8.17.1.1 | NA | mandatory | |
| CportCpuStatsUtilIndx | 1.3.6.1.4.1.1872.2.1.8.17.1.1.1 | INTEGER (1..255) | RO | mandatory |
column · INTEGER (1..255) · read-only · mandatory The port index. | ||||
| CportCpuAStatsUtil1Second | 1.3.6.1.4.1.1872.2.1.8.17.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The utilization of port CPU A over 1 second. It shows the percentage. | ||||
| CportCpuBStatsUtil1Second | 1.3.6.1.4.1.1872.2.1.8.17.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The utilization of port CPU B over 1 second. It shows the percentage. | ||||
| CportCpuAStatsUtil4Seconds | 1.3.6.1.4.1.1872.2.1.8.17.1.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The utilization of port CPU A over 4 seconds. It shows the percentage. | ||||
| CportCpuBStatsUtil4Seconds | 1.3.6.1.4.1.1872.2.1.8.17.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The utilization of port CPU B over 4 seconds. It shows the percentage. | ||||
| CportCpuAStatsUtil64Seconds | 1.3.6.1.4.1.1872.2.1.8.17.1.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The utilization of port CPU A over 64 seconds. It shows the percentage. | ||||
| CportCpuBStatsUtil64Seconds | 1.3.6.1.4.1.1872.2.1.8.17.1.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The utilization of port CPU B over 64 seconds. It shows the percentage. | ||||
| Nport-stats | 1.3.6.1.4.1.1872.2.1.8.26 | |||
| TportStatsTable | 1.3.6.1.4.1.1872.2.1.8.26.1 | NA | mandatory | |
table · not-accessible · mandatory The table of port statistics. | ||||
| RportStatsTableEntry | 1.3.6.1.4.1.1872.2.1.8.26.1.1 | NA | mandatory | |
| CportStatsIndx | 1.3.6.1.4.1.1872.2.1.8.26.1.1.1 | INTEGER (1..255) | RO | mandatory |
column · INTEGER (1..255) · read-only · mandatory The port index. | ||||
| CportStatsPhyIfInOctets | 1.3.6.1.4.1.1872.2.1.8.26.1.1.2 | Counter | RO | mandatory |
column · Counter · read-only · mandatory The total number of octets received on the interface, including framing characters. | ||||
| CportStatsPhyIfInUcastPkts | 1.3.6.1.4.1.1872.2.1.8.26.1.1.3 | Counter | RO | mandatory |
column · Counter · read-only · mandatory The number of subnetwork-unicast packets delivered to a higher-layer protocol. | ||||
| CportStatsPhyIfInNUcastPkts | 1.3.6.1.4.1.1872.2.1.8.26.1.1.4 | Counter | RO | mandatory |
column · Counter · read-only · mandatory The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol. | ||||
| CportStatsPhyIfInDiscards | 1.3.6.1.4.1.1872.2.1.8.26.1.1.5 | Counter | RO | mandatory |
column · Counter · read-only · mandatory The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. | ||||
| CportStatsPhyIfInErrors | 1.3.6.1.4.1.1872.2.1.8.26.1.1.6 | Counter | RO | mandatory |
column · Counter · read-only · mandatory The number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. | ||||
| CportStatsPhyIfInUnknownProtos | 1.3.6.1.4.1.1872.2.1.8.26.1.1.7 | Counter | RO | mandatory |
column · Counter · read-only · mandatory The number of packets received via the interface which were discarded because of an unknown or unsupported protocol. | ||||
| CportStatsPhyIfOutOctets | 1.3.6.1.4.1.1872.2.1.8.26.1.1.8 | Counter | RO | mandatory |
column · Counter · read-only · mandatory The total number of octets transmitted out of the interface, including framing characters. | ||||
| CportStatsPhyIfOutUcastPkts | 1.3.6.1.4.1.1872.2.1.8.26.1.1.9 | Counter | RO | mandatory |
column · Counter · read-only · mandatory The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address, including those that were discarded or not sent. | ||||
| CportStatsPhyIfOutNUcastPkts | 1.3.6.1.4.1.1872.2.1.8.26.1.1.10 | Counter | RO | mandatory |
column · Counter · read-only · mandatory The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address, including those that were discarded or not sent. | ||||
| CportStatsPhyIfOutDiscards | 1.3.6.1.4.1.1872.2.1.8.26.1.1.11 | Counter | RO | mandatory |
column · Counter · read-only · mandatory The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. | ||||
| CportStatsPhyIfOutErrors | 1.3.6.1.4.1.1872.2.1.8.26.1.1.12 | Counter | RO | mandatory |
column · Counter · read-only · mandatory The number of outbound packets that could not be transmitted because of errors. | ||||
| CportStatsPhyIfOutQLen | 1.3.6.1.4.1.1872.2.1.8.26.1.1.13 | Gauge | RO | mandatory |
column · Gauge · read-only · mandatory The length of the output packet queue (in packets). | ||||
| CportStatsPhyIfInBroadcastPkts | 1.3.6.1.4.1.1872.2.1.8.26.1.1.14 | Counter | RO | mandatory |
column · Counter · read-only · mandatory The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. | ||||
| CportStatsPhyIfOutBroadcastPkts | 1.3.6.1.4.1.1872.2.1.8.26.1.1.15 | Counter | RO | mandatory |
column · Counter · read-only · mandatory The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. | ||||
| Nport-info | 1.3.6.1.4.1.1872.2.1.9.1 | |||
| TportInfoTable | 1.3.6.1.4.1.1872.2.1.9.1.1 | NA | mandatory | |
table · not-accessible · mandatory The table of port information. | ||||
| RportInfoTableEntry | 1.3.6.1.4.1.1872.2.1.9.1.1.1 | NA | mandatory | |
| CportInfoIndx | 1.3.6.1.4.1.1872.2.1.9.1.1.1.1 | INTEGER (1..255) | RO | mandatory |
column · INTEGER (1..255) · read-only · mandatory The port index. | ||||
| CportInfoSpeed | 1.3.6.1.4.1.1872.2.1.9.1.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The current operational speed of the port.
| ||||
| CportInfoMode | 1.3.6.1.4.1.1872.2.1.9.1.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The current operational mode of the port.
| ||||
| CportInfoFlowCtrl | 1.3.6.1.4.1.1872.2.1.9.1.1.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The current operational flow control of the port.
| ||||
| CportInfoLink | 1.3.6.1.4.1.1872.2.1.9.1.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The current operational link status of the port.
| ||||
| CportInfoPhyIfDescr | 1.3.6.1.4.1.1872.2.1.9.1.1.1.6 | DisplayString (SIZE (0..255)) | RO | mandatory |
column · DisplayString (SIZE (0..255)) · read-only · mandatory A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the hardware interface. | ||||
| CportInfoPhyIfType | 1.3.6.1.4.1.1872.2.1.9.1.1.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The type of interface, distinguished according to the physical/link protocol(s) immediately `below' the network layer in the protocol stack.
| ||||
| CportInfoPhyIfMtu | 1.3.6.1.4.1.1872.2.1.9.1.1.1.8 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagrams, this is the size of the largest network datagram that can be sent on the interface. | ||||
| CportInfoPhyIfPhysAddress | 1.3.6.1.4.1.1872.2.1.9.1.1.1.9 | PhysAddress | RO | mandatory |
column · PhysAddress · read-only · mandatory The interface's address at the protocol layer immediately `below' the network layer in the protocol stack. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length. | ||||
| CportInfoPhyIfOperStatus | 1.3.6.1.4.1.1872.2.1.9.1.1.1.10 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed.
| ||||
| CportInfoPhyIfLastChange | 1.3.6.1.4.1.1872.2.1.9.1.1.1.11 | TimeTicks | RO | mandatory |
column · TimeTicks · read-only · mandatory The value of sysUpTime at the time the interface entered its current operational state. If the current state was entered prior to the last re- initialization of the local network management subsystem, then this object contains a zero value. | ||||
| NmirrOper | 1.3.6.1.4.1.1872.2.1.14.3 | |||
| SmirrOperMonitoringPort | 1.3.6.1.4.1.1872.2.1.14.3.1 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory The switch port where the mirrored traffic are sent to. A zero value indicates this field has not been configured. | ||||
| SmirrOperMirroredPort | 1.3.6.1.4.1.1872.2.1.14.3.2 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory The switch port where the egress traffic to be mirrored. A zero value indicates this field has not been configured. | ||||
| SmirrOperType | 1.3.6.1.4.1.1872.2.1.14.3.3 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Type of packets to be sent to the monitor port. in = packets received at the mirrored port out = packets sent from the mirrored port both = packets sent and received by the mirrored port
| ||||
| SmirrOperTimeout | 1.3.6.1.4.1.1872.2.1.14.3.4 | INTEGER (0..86400) | RW | mandatory |
scalar · INTEGER (0..86400) · read-write · mandatory The duration in seconds for activating the mirroring rule. Zero means forever. | ||||
| SmirrOperState | 1.3.6.1.4.1.1872.2.1.14.3.5 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Enable or disable port mirroring.
| ||||
| Nmirroring | 1.3.6.1.4.1.1872.2.1.18 | |||
| NmirrPortMirr | 1.3.6.1.4.1.1872.2.1.18.1 | |||
| SpmCurCfgPortMirrState | 1.3.6.1.4.1.1872.2.1.18.1.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The state of port-based port mirroring.
| ||||
| SpmNewCfgPortMirrState | 1.3.6.1.4.1.1872.2.1.18.1.2 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory The state of port-based port mirroring.
| ||||
| TpmCurCfgPortMonitorTable | 1.3.6.1.4.1.1872.2.1.18.1.3 | NA | mandatory | |
table · not-accessible · mandatory The table of monitoring ports. | ||||
| RpmCurCfgPortMonitorEntry | 1.3.6.1.4.1.1872.2.1.18.1.3.1 | NA | mandatory | |
row · not-accessible · mandatory A row in the monitoring port table. | ||||
| CpmCurCfgPmirrMoniPortIndex | 1.3.6.1.4.1.1872.2.1.18.1.3.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The monitoring port number. | ||||
| CpmCurCfgPmirrMirrPortIndex | 1.3.6.1.4.1.1872.2.1.18.1.3.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The mirrored port number | ||||
| CpmCurCfgPmirrDirection | 1.3.6.1.4.1.1872.2.1.18.1.3.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The type of traffic to be monitored with respect to the mirrored port.
| ||||
| TpmNewCfgPortMonitorTable | 1.3.6.1.4.1.1872.2.1.18.1.4 | NA | mandatory | |
table · not-accessible · mandatory The table of monitoring ports. | ||||
| RpmNewCfgPortMonitorEntry | 1.3.6.1.4.1.1872.2.1.18.1.4.1 | NA | mandatory | |
row · not-accessible · mandatory A row in the monitoring port table. | ||||
| CpmNewCfgPmirrMoniPortIndex | 1.3.6.1.4.1.1872.2.1.18.1.4.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The monitoring port number. | ||||
| CpmNewCfgPmirrMirrPortIndex | 1.3.6.1.4.1.1872.2.1.18.1.4.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The mirrored port number | ||||
| CpmNewCfgPmirrDirection | 1.3.6.1.4.1.1872.2.1.18.1.4.1.3 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The type of traffic to be monitored with respect to the mirrored port.
| ||||
| CpmNewCfgPmirrDelete | 1.3.6.1.4.1.1872.2.1.18.1.4.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Setting the value to delete(2) will delete the entire row. When read, other(1) is returned.
| ||||
| NmirrVlanMirr | 1.3.6.1.4.1.1872.2.1.18.2 | |||
| SpmCurCfgVlanMirrState | 1.3.6.1.4.1.1872.2.1.18.2.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The state of vlan-based port mirroring.
| ||||
| SpmNewCfgVlanMirrState | 1.3.6.1.4.1.1872.2.1.18.2.2 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory The state of vlan-based port mirroring.
| ||||
| TpmCurCfgVlanMonitorTable | 1.3.6.1.4.1.1872.2.1.18.2.3 | NA | mandatory | |
table · not-accessible · mandatory The table of vlan based port mirroring. | ||||
| RpmCurCfgVlanMonitorEntry | 1.3.6.1.4.1.1872.2.1.18.2.3.1 | NA | mandatory | |
row · not-accessible · mandatory A row in the monitoring vlan table. | ||||
| CpmCurCfgVmirrMoniPortIndex | 1.3.6.1.4.1.1872.2.1.18.2.3.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The monitoring port number. | ||||
| CpmCurCfgVmirrMirrVlanIndex | 1.3.6.1.4.1.1872.2.1.18.2.3.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The mirrored vlan number | ||||
| CpmCurCfgVmirrDirection | 1.3.6.1.4.1.1872.2.1.18.2.3.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The type of traffic to be monitored with respect to the mirrored vlan.
| ||||
| TpmNewCfgVlanMonitorTable | 1.3.6.1.4.1.1872.2.1.18.2.4 | NA | mandatory | |
table · not-accessible · mandatory The table of vlan-based port mirroring. | ||||
| RpmNewCfgVlanMonitorEntry | 1.3.6.1.4.1.1872.2.1.18.2.4.1 | NA | mandatory | |
row · not-accessible · mandatory A row in the monitoring vlan table. | ||||
| CpmNewCfgVmirrMoniPortIndex | 1.3.6.1.4.1.1872.2.1.18.2.4.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The monitoring port number. | ||||
| CpmNewCfgVmirrMirrVlanIndex | 1.3.6.1.4.1.1872.2.1.18.2.4.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The mirrored vlan number | ||||
| CpmNewCfgVmirrDirection | 1.3.6.1.4.1.1872.2.1.18.2.4.1.3 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The type of traffic to be monitored with respect to the mirrored vlan.
| ||||
| CpmNewCfgVmirrDelete | 1.3.6.1.4.1.1872.2.1.18.2.4.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Setting the value to delete(2) will delete the entire row. When read, other(1) is returned.
| ||||
| NspannTreeGrpCfg | 1.3.6.1.4.1.1872.2.1.19 | |||
| TstgCurCfgTable | 1.3.6.1.4.1.1872.2.1.19.1 | NA | mandatory | |
table · not-accessible · mandatory The table of Spanning Tree Groups configuration in the current_config. | ||||
| RstgCurCfgTableEntry | 1.3.6.1.4.1.1872.2.1.19.1.1 | NA | mandatory | |
row · not-accessible · mandatory Information about a particular Spanning Tree Group configuration.
| ||||
| CstgCurCfgIndex | 1.3.6.1.4.1.1872.2.1.19.1.1.1 | INTEGER (1..8) | RO | mandatory |
column · INTEGER (1..8) · read-only · mandatory The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB. | ||||
| CstgCurCfgState | 1.3.6.1.4.1.1872.2.1.19.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Turn on of off Spanning Tree operation of a particular Spanning Tree Group.
| ||||
| CstgCurCfgVlanBmap1 | 1.3.6.1.4.1.1872.2.1.19.1.1.3 | OCTET STRING (SIZE (0..256)) | RO | mandatory |
column · OCTET STRING (SIZE (0..256)) · read-only · mandatory The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 2048.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning tree | ||||
| CstgCurCfgVlanBmap2 | 1.3.6.1.4.1.1872.2.1.19.1.1.4 | OCTET STRING (SIZE (0..256)) | RO | mandatory |
column · OCTET STRING (SIZE (0..256)) · read-only · mandatory The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 2049 to 4096.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 2057
|| ||
|| ||___ vlan 2056
|| |____ vlan 2055
|| . . .
||_________ vlan 2050
|__________ vlan 2049 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning tree | ||||
| TstgNewCfgTable | 1.3.6.1.4.1.1872.2.1.19.2 | NA | mandatory | |
table · not-accessible · mandatory The table of Spanning Tree Groups configuration in the new_config. | ||||
| RstgNewCfgTableEntry | 1.3.6.1.4.1.1872.2.1.19.2.1 | NA | mandatory | |
row · not-accessible · mandatory Information about a particular Spanning Tree Group configuration.
| ||||
| CstgNewCfgIndex | 1.3.6.1.4.1.1872.2.1.19.2.1.1 | INTEGER (1..8) | RO | mandatory |
column · INTEGER (1..8) · read-only · mandatory The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB. | ||||
| CstgNewCfgState | 1.3.6.1.4.1.1872.2.1.19.2.1.2 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Turn on of off Spanning Tree operation of a particular Spanning Tree Group.
| ||||
| CstgNewCfgDefaultCfg | 1.3.6.1.4.1.1872.2.1.19.2.1.3 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Setting the value to default-config(1) will set the default
configuration as recommended by IEEE 802.1D for a particular
Spanning Tree Group. default-config (1) is always returned
When read, but it does not mean anything.
| ||||
| CstgNewCfgAddVlan | 1.3.6.1.4.1.1872.2.1.19.2.1.4 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The vlan to be added to the specified Spanning Tree Group. A '0' value is returned when read. | ||||
| CstgNewCfgRemoveVlan | 1.3.6.1.4.1.1872.2.1.19.2.1.5 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory The vlan to be removed from the specified Spanning Tree Group. A '0' value is returned when read. | ||||
| CstgNewCfgVlanBmap1 | 1.3.6.1.4.1.1872.2.1.19.2.1.6 | OCTET STRING (SIZE (0..256)) | RO | mandatory |
column · OCTET STRING (SIZE (0..256)) · read-only · mandatory The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 1 to 2048.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 9
|| ||
|| ||___ vlan 8
|| |____ vlan 7
|| . . .
||_________ vlan 2
|__________ vlan 1 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning tree | ||||
| CstgNewCfgVlanBmap2 | 1.3.6.1.4.1.1872.2.1.19.2.1.7 | OCTET STRING (SIZE (0..256)) | RO | mandatory |
column · OCTET STRING (SIZE (0..256)) · read-only · mandatory The vlans applied to the spanning tree group. The vlans are
presented in bitmap format. This string displays vlan number
from 2049 to 4096.
in receiving order:
OCTET 1 OCTET 2 .....
xxxxxxxx xxxxxxxx .....
|| || |_ vlan 2057
|| ||
|| ||___ vlan 2056
|| |____ vlan 2055
|| . . .
||_________ vlan 2050
|__________ vlan 2049 (as index to stgCurCfgTable)
where x : 1 - The represented vlan applied to the spanning tree.
0 - The represented vlan not applied to the spanning tree | ||||
| TstgCurCfgPortTable | 1.3.6.1.4.1.1872.2.1.19.3 | NA | mandatory | |
table · not-accessible · mandatory The table of Spanning Tree Group port configuration in the current_config. | ||||
| RstgCurCfgPortTableEntry | 1.3.6.1.4.1.1872.2.1.19.3.1 | NA | mandatory | |
row · not-accessible · mandatory Information about port configuration of a particular Spanning Tree Group. | ||||
| CstgCurCfgStgIndex | 1.3.6.1.4.1.1872.2.1.19.3.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB. | ||||
| CstgCurCfgPortIndex | 1.3.6.1.4.1.1872.2.1.19.3.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The port identifier of a particular Spanning Tree Group. | ||||
| CstgCurCfgPortState | 1.3.6.1.4.1.1872.2.1.19.3.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Turn on of off Spanning Tree operation of a particular port of a Spanning Tree Group.
| ||||
| TstgNewCfgPortTable | 1.3.6.1.4.1.1872.2.1.19.4 | NA | mandatory | |
table · not-accessible · mandatory The table of Spanning Tree Group port configuration in the new_config. | ||||
| RstgNewCfgPortTableEntry | 1.3.6.1.4.1.1872.2.1.19.4.1 | NA | mandatory | |
row · not-accessible · mandatory Information about port configuration of a particular Spanning Tree Group. | ||||
| CstgNewCfgStgIndex | 1.3.6.1.4.1.1872.2.1.19.4.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB. | ||||
| CstgNewCfgPortIndex | 1.3.6.1.4.1.1872.2.1.19.4.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The port identifier of a particular Spanning Tree Group. | ||||
| CstgNewCfgPortState | 1.3.6.1.4.1.1872.2.1.19.4.1.3 | INTEGER | RW | mandatory |
column · INTEGER · read-write · mandatory Turn on of off Spanning Tree operation of a particular port of a Spanning Tree Group.
| ||||