ALTEON-TIGON-SWITCH-MIB
Alteon Networks, Inc.snmptranslate -m ALTEON-TIGON-SWITCH-MIB -Tpsnmpwalk -v2c -c <community> -m ALTEON-TIGON-SWITCH-MIB <host> 1.3.6.1.4.1.1872.2.1.1Imports
| ALTEON-ROOT-MIB | switch |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso, mgmt |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Nhardware | 1.3.6.1.4.1.1872.2.1.1 | |||
| ShwPartNumber | 1.3.6.1.4.1.1872.2.1.1.1 | DisplayString (SIZE (0..16)) | RO | mandatory |
scalar · DisplayString (SIZE (0..16)) · read-only · mandatory The hardware part number of the Alteon Switch. | ||||
| ShwRevision | 1.3.6.1.4.1.1872.2.1.1.2 | DisplayString (SIZE (0..16)) | RO | mandatory |
scalar · DisplayString (SIZE (0..16)) · read-only · mandatory The hardware revision. If the revision is not available, a zero length string should be returned. | ||||
| ShwPowerSupplyStatus | 1.3.6.1.4.1.1872.2.1.1.3 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The status of the internal power supply.
| ||||
| ShwRedundantPSPresent | 1.3.6.1.4.1.1872.2.1.1.4 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Existence of redundant power supply.
| ||||
| ShwRedundantPSStatus | 1.3.6.1.4.1.1872.2.1.1.5 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The status of the redundant power supply.
| ||||
| ShwSensor1Temp | 1.3.6.1.4.1.1872.2.1.1.6 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The temperature of the rear left sensor in degrees Celsius. | ||||
| ShwSensor2Temp | 1.3.6.1.4.1.1872.2.1.1.7 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The temperature of the rear middle sensor in degrees Celsius. | ||||
| ShwSensor3Temp | 1.3.6.1.4.1.1872.2.1.1.8 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The temperature of the front middle sensor in degrees Celsius. | ||||
| ShwSensor4Temp | 1.3.6.1.4.1.1872.2.1.1.9 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The temperature of the front right sensor in degrees Celsius. | ||||
| Nagent | 1.3.6.1.4.1.1872.2.1.2 | |||
| NagGeneral | 1.3.6.1.4.1.1872.2.1.2.1 | |||
| SagSaveConfiguration | 1.3.6.1.4.1.1872.2.1.2.1.1 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory This is an action object to write current configuration to nonvolatile storage. When issued with the saveActive, the active configuration in flash is saved to backup in flash and then the new configuration is saved to the active configuration in flash. When issued with notSaveActive, the active configuration is NOT saved to the flash and the active configuration is overwritten with the new configuration. ok(1) is returned always when read.
| ||||
| SagApplyConfiguration | 1.3.6.1.4.1.1872.2.1.2.1.2 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory This is an action object to apply the changes made to configuration of the switch. By setting the value to apply(2), all the changes made since the last apply are written to the new_config block. other(1) is returned when this object ie read.
| ||||
| SagApplyPending | 1.3.6.1.4.1.1872.2.1.2.1.3 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory This object, when read, gives the user information whether an apply action is needed and that the configuration has been chaged by the user actions. The user then can apply the changes by setting proper value to the object agApplyConfiguration described above.
| ||||
| SagReset | 1.3.6.1.4.1.1872.2.1.2.1.4 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory This is an action object to reboot the agent.
other(1) is returned always when read.
The following values are writable:
coldReset(2)...
warmReset(3)...
| ||||
| SagConfigForNxtReset | 1.3.6.1.4.1.1872.2.1.2.1.5 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory The configuration information to be loaded from at next reset.
The following values are writable:
active(2)...active configuration block
backup(3)...backup configuration block
default(4)..default configuration block
| ||||
| SagImageForNxtReset | 1.3.6.1.4.1.1872.2.1.2.1.6 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory The software image to be booted from at next reset.
The following values are writable:
image1(2)...image 1
image2(3)...image 2
| ||||
| SagSoftwareVersion | 1.3.6.1.4.1.1872.2.1.2.1.7 | DisplayString (SIZE (0..16)) | RO | mandatory |
scalar · DisplayString (SIZE (0..16)) · read-only · mandatory The version of the software image that is currently running on the system in the form of 'major.minor.maintenance.bugfix'. A zero length string is returned if version is not available. | ||||
| SagBootVer | 1.3.6.1.4.1.1872.2.1.2.1.8 | DisplayString (SIZE (0..16)) | RO | mandatory |
scalar · DisplayString (SIZE (0..16)) · read-only · mandatory The version of the boot code in the form of 'major.minor.bugfix'. A zero length string is returned if version is not available. | ||||
| SagImage1Ver | 1.3.6.1.4.1.1872.2.1.2.1.9 | DisplayString (SIZE (0..128)) | RO | mandatory |
scalar · DisplayString (SIZE (0..128)) · read-only · mandatory The version of the software image stored in image 1 storage in the form of 'major.minor.maintenance.bugfix'. A zero length string is returned if version is not available or there is no valid software image. | ||||
| SagImage2Ver | 1.3.6.1.4.1.1872.2.1.2.1.10 | DisplayString (SIZE (0..128)) | RO | mandatory |
scalar · DisplayString (SIZE (0..128)) · read-only · mandatory The version of the software image stored in image 2 storage in the form of 'major.minor.maintenance.bugfix'. A zero length string is returned if version is not available or there is no valid software image. | ||||
| SagRtcDate | 1.3.6.1.4.1.1872.2.1.2.1.11 | DisplayString (SIZE (0..16)) | RW | mandatory |
scalar · DisplayString (SIZE (0..16)) · read-write · mandatory The date on the real time clock in the form of 'mm/dd/yy'. A zero length string is returned if date is not available. | ||||
| SagRtcTime | 1.3.6.1.4.1.1872.2.1.2.1.12 | DisplayString (SIZE (0..16)) | RW | mandatory |
scalar · DisplayString (SIZE (0..16)) · read-write · mandatory The time on the real time clock in the form of 'hh:mm:ss'. A zero length string is returned if time is not available. | ||||
| SagTftpServerIpAddr | 1.3.6.1.4.1.1872.2.1.2.1.13 | IpAddress | RW | mandatory |
scalar · IpAddress · read-write · mandatory The TFTP server IP address. | ||||
| SagTftpImageFileName | 1.3.6.1.4.1.1872.2.1.2.1.14 | DisplayString (SIZE (0..128)) | RW | mandatory |
scalar · DisplayString (SIZE (0..128)) · read-write · mandatory The image file name to be downloaded. | ||||
| SagTftpImage | 1.3.6.1.4.1.1872.2.1.2.1.15 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Whether the image file should be loaded in image1 or image2 in flash.
| ||||
| SagTftpDownload | 1.3.6.1.4.1.1872.2.1.2.1.16 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory This is an action object to cause to download software image according to the setup of agTftpServerIpAddr, agTftpImageFileName, agTftpImage when download(2) is issued. other(1) is returned always when read.
| ||||
| SagLastSetErrorReason | 1.3.6.1.4.1.1872.2.1.2.1.17 | DisplayString (SIZE (0..256)) | RO | mandatory |
scalar · DisplayString (SIZE (0..256)) · read-only · mandatory The error reason of the last SET failure. | ||||
| SagTftpServer | 1.3.6.1.4.1.1872.2.1.2.1.18 | DisplayString (SIZE (0..64)) | RW | mandatory |
scalar · DisplayString (SIZE (0..64)) · read-write · mandatory The TFTP server IP address or domain name. | ||||
| SagTftpCfgFileName | 1.3.6.1.4.1.1872.2.1.2.1.19 | DisplayString (SIZE (0..128)) | RW | mandatory |
scalar · DisplayString (SIZE (0..128)) · read-write · mandatory The configuration file name. | ||||
| SagTftpDumpFileName | 1.3.6.1.4.1.1872.2.1.2.1.20 | DisplayString (SIZE (0..128)) | RW | mandatory |
scalar · DisplayString (SIZE (0..128)) · read-write · mandatory The file name for core dump. | ||||
| SagTftpAction | 1.3.6.1.4.1.1872.2.1.2.1.21 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory This is an action object to perform various TFTP Get or Put functions.
The TFTP sever is specified in agTftpServer object.
img-get(2) - Download switch image from a specified image
file (agTftpImageFileName) on the TFTP server to
the destinated storage (agTftpImage).
cfg-get(3) - Download switch configuration from a specified
file (agTftpCfgFileName) on the TFTP server.
cfg-put(4) - Upload switch configuration to a specified
file (agTftpCfgFileName) on the TFTP server.
dump-put(5)- Download switch core dump to a specified
file (agTftpDumpFileName) on the TFTP server.
other(1) is returned always when read.
| ||||
| SagTftpLastActionStatus | 1.3.6.1.4.1.1872.2.1.2.1.22 | DisplayString (SIZE (0..128)) | RO | mandatory |
scalar · DisplayString (SIZE (0..128)) · read-only · mandatory The recorded status of the previous TFTP activity. | ||||
| SagRevert | 1.3.6.1.4.1.1872.2.1.2.1.23 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory This is an action object to revert the unapplied changes made to the switch. By setting the value to revert(2), all the unapplied changes will be reverted. This action will copy the current_config to the new_config block. other(1) is returned when this object is read.
| ||||
| SagRevertApply | 1.3.6.1.4.1.1872.2.1.2.1.24 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory This is an action object to revert the unsaved changes made to the switch. By setting the value to revertApply(2), all the unsaved as well as unapplied changes will be reverted. other(1) is returned when this object is read.
| ||||
| SagEnabledSwFeatures | 1.3.6.1.4.1.1872.2.1.2.1.25 | DisplayString | RO | mandatory |
scalar · DisplayString · read-only · mandatory The software features that are enabled on the switch. | ||||
| SagClrSyslogMsgs | 1.3.6.1.4.1.1872.2.1.2.1.26 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Clears all current Syslog messages.
| ||||
| SagSavePending | 1.3.6.1.4.1.1872.2.1.2.1.27 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory This object, when read, gives the user information whether an save action is needed and that the configuration has been applied but not saved to the flash.
| ||||
| SagEnabledGslbKey | 1.3.6.1.4.1.1872.2.1.2.1.28 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Query if software key Global slb enabled on switch.
| ||||
| SagEnabledBwmKey | 1.3.6.1.4.1.1872.2.1.2.1.29 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Query if software key Bandwidth Mgmt. enabled on switch.
| ||||
| SagSlotNumber | 1.3.6.1.4.1.1872.2.1.2.1.30 | INTEGER (1..10) | RO | mandatory |
scalar · INTEGER (1..10) · read-only · mandatory Identifies the slot in which this switch is installed. If the agent implementing this MIB is not a blade in a chassis this value has no meaning. | ||||
| SagEnabledRurlKey | 1.3.6.1.4.1.1872.2.1.2.1.31 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The status of the RURL software key.
| ||||
| NagGeneralConfig | 1.3.6.1.4.1.1872.2.1.2.2 | |||
| SagNewCfgSyslogHost | 1.3.6.1.4.1.1872.2.1.2.2.1 | IpAddress | RW | mandatory |
scalar · IpAddress · read-write · mandatory The syslog host IP address, in the new_configuration block. | ||||
| SagCurCfgSyslogHost | 1.3.6.1.4.1.1872.2.1.2.2.2 | IpAddress | RO | mandatory |
scalar · IpAddress · read-only · mandatory The syslog host IP address, as currently configured in the current_configuration block. | ||||
| SagNewCfgBootp | 1.3.6.1.4.1.1872.2.1.2.2.3 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Enable or disable the use of BootP, in the new_configuration block.
| ||||
| SagCurCfgBootp | 1.3.6.1.4.1.1872.2.1.2.2.4 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Enable or disable the use of BootP, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSpanningTree | 1.3.6.1.4.1.1872.2.1.2.2.5 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Turn On or Off Spanning Tree Protocol for the switch, in the new_configuration block.
| ||||
| SagCurCfgSpanningTree | 1.3.6.1.4.1.1872.2.1.2.2.6 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The state of Spanning Tree Protocol for the switch, as currently configured in the current_configuration block.
| ||||
| SagTrapHostTableMaxEnt | 1.3.6.1.4.1.1872.2.1.2.2.7 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The maximum number of rows in the trap host table. | ||||
| TagCurCfgTrapHostTable | 1.3.6.1.4.1.1872.2.1.2.2.8 | NA | mandatory | |
table · not-accessible · mandatory The table of trap hosts which to send SNMP traps in the current_configuration block. | ||||
| RagCurCfgTrapHostEntry | 1.3.6.1.4.1.1872.2.1.2.2.8.1 | NA | mandatory | |
row · not-accessible · mandatory A row in the trap host table in the current_configuration block.
| ||||
| CagCurCfgTrapHostIndx | 1.3.6.1.4.1.1872.2.1.2.2.8.1.1 | INTEGER (1..255) | RO | mandatory |
column · INTEGER (1..255) · read-only · mandatory The index of the row in trap host table. | ||||
| CagCurCfgTrapHostIpAddr | 1.3.6.1.4.1.1872.2.1.2.2.8.1.2 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The IP address of a trap host. | ||||
| CagCurCfgTrapHostCommString | 1.3.6.1.4.1.1872.2.1.2.2.8.1.3 | DisplayString (SIZE (0..32)) | RO | mandatory |
column · DisplayString (SIZE (0..32)) · read-only · mandatory The SNMP community string to use with the trap host | ||||
| TagNewCfgTrapHostTable | 1.3.6.1.4.1.1872.2.1.2.2.9 | NA | mandatory | |
table · not-accessible · mandatory The table of trap hosts which to send SNMP traps in the new_configuration block. | ||||
| RagNewCfgTrapHostEntry | 1.3.6.1.4.1.1872.2.1.2.2.9.1 | NA | mandatory | |
row · not-accessible · mandatory A row in the trap host table in the new_configuration block.
| ||||
| CagNewCfgTrapHostIndx | 1.3.6.1.4.1.1872.2.1.2.2.9.1.1 | INTEGER (1..255) | RO | mandatory |
column · INTEGER (1..255) · read-only · mandatory The index of the row in trap host table. | ||||
| CagNewCfgTrapHostIpAddr | 1.3.6.1.4.1.1872.2.1.2.2.9.1.2 | IpAddress | RW | mandatory |
column · IpAddress · read-write · mandatory The IP address of a trap host. | ||||
| CagNewCfgTrapHostCommString | 1.3.6.1.4.1.1872.2.1.2.2.9.1.3 | DisplayString (SIZE (0..32)) | RW | mandatory |
column · DisplayString (SIZE (0..32)) · read-write · mandatory The SNMP community string to use with the trap host | ||||
| SagCurCfgHttpServerPort | 1.3.6.1.4.1.1872.2.1.2.2.10 | INTEGER (1..65535) | RO | mandatory |
scalar · INTEGER (1..65535) · read-only · mandatory The TCP port number that the HTTP server is listening to in the current_configuration block. | ||||
| SagNewCfgHttpServerPort | 1.3.6.1.4.1.1872.2.1.2.2.11 | INTEGER (1..65535) | RW | mandatory |
scalar · INTEGER (1..65535) · read-write · mandatory The TCP port number that the HTTP server is listening to in the new_configuration block. | ||||
| SagCurCfgLoginBanner | 1.3.6.1.4.1.1872.2.1.2.2.12 | DisplayString (SIZE (0..79)) | RO | mandatory |
scalar · DisplayString (SIZE (0..79)) · read-only · mandatory The user defined login banner. | ||||
| SagNewCfgLoginBanner | 1.3.6.1.4.1.1872.2.1.2.2.13 | DisplayString (SIZE (0..79)) | RW | mandatory |
scalar · DisplayString (SIZE (0..79)) · read-write · mandatory The user defined login banner. | ||||
| SagNewCfgSyslog2Host | 1.3.6.1.4.1.1872.2.1.2.2.14 | IpAddress | RW | mandatory |
scalar · IpAddress · read-write · mandatory The second syslog host IP address, in the new_configuration block. | ||||
| SagCurCfgSyslog2Host | 1.3.6.1.4.1.1872.2.1.2.2.15 | IpAddress | RO | mandatory |
scalar · IpAddress · read-only · mandatory The second syslog host IP address, as currently configured in the current_configuration block. | ||||
| SagCurCfgSyslogFac | 1.3.6.1.4.1.1872.2.1.2.2.16 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The facility of syslog host in the current_configuration block.
| ||||
| SagNewCfgSyslogFac | 1.3.6.1.4.1.1872.2.1.2.2.17 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory The facility of syslog host in the new_configuration block.
| ||||
| SagCurCfgSyslog2Fac | 1.3.6.1.4.1.1872.2.1.2.2.18 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The facility of syslog2 host in the current_configuration block.
| ||||
| SagNewCfgSyslog2Fac | 1.3.6.1.4.1.1872.2.1.2.2.19 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory The facility of syslogs host in the new_configuration block.
| ||||
| SagCurCfgSmtpHost | 1.3.6.1.4.1.1872.2.1.2.2.20 | DisplayString (SIZE (0..127)) | RO | mandatory |
scalar · DisplayString (SIZE (0..127)) · read-only · mandatory The user defined SMTP host. | ||||
| SagNewCfgSmtpHost | 1.3.6.1.4.1.1872.2.1.2.2.21 | DisplayString (SIZE (0..127)) | RW | mandatory |
scalar · DisplayString (SIZE (0..127)) · read-write · mandatory The user defined SMTP host. | ||||
| SagCurCfgConsole | 1.3.6.1.4.1.1872.2.1.2.2.22 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Enable or disable console output of syslog messages.
| ||||
| SagNewCfgConsole | 1.3.6.1.4.1.1872.2.1.2.2.23 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Enable or disable console output of syslog messages.
| ||||
| SagCurCfgMgmtNetwork | 1.3.6.1.4.1.1872.2.1.2.2.24 | IpAddress | RO | mandatory |
scalar · IpAddress · read-only · mandatory The management network - corresponding to the mnet command of the slb configuration menu. | ||||
| SagNewCfgMgmtNetwork | 1.3.6.1.4.1.1872.2.1.2.2.25 | IpAddress | RW | mandatory |
scalar · IpAddress · read-write · mandatory The management network - corresponding to the mnet command of the system menu. | ||||
| SagCurCfgMgmtMask | 1.3.6.1.4.1.1872.2.1.2.2.26 | IpAddress | RO | mandatory |
scalar · IpAddress · read-only · mandatory The management subnet mask - corresponding to the mmask command of the system configuration menu. | ||||
| SagNewCfgMgmtMask | 1.3.6.1.4.1.1872.2.1.2.2.27 | IpAddress | RW | mandatory |
scalar · IpAddress · read-write · mandatory The management subnet mask - corresponding to the mmask command of the system configuration menu. | ||||
| NagNTP | 1.3.6.1.4.1.1872.2.1.2.2.28 | |||
| SagCurCfgNTPServer | 1.3.6.1.4.1.1872.2.1.2.2.28.1 | IpAddress | RO | mandatory |
scalar · IpAddress · read-only · mandatory The NTP Server Address. | ||||
| SagNewCfgNTPServer | 1.3.6.1.4.1.1872.2.1.2.2.28.2 | IpAddress | RW | mandatory |
scalar · IpAddress · read-write · mandatory The NTP Server Address. | ||||
| SagCurCfgNTPResyncInterval | 1.3.6.1.4.1.1872.2.1.2.2.28.3 | INTEGER (1..2880) | RO | mandatory |
scalar · INTEGER (1..2880) · read-only · mandatory The NTP Server resync interval in minutes. | ||||
| SagNewCfgNTPResyncInterval | 1.3.6.1.4.1.1872.2.1.2.2.28.4 | INTEGER (1..2880) | RW | mandatory |
scalar · INTEGER (1..2880) · read-write · mandatory The NTP Server resync interval in minutes. | ||||
| SagCurCfgNTPTzone | 1.3.6.1.4.1.1872.2.1.2.2.28.5 | DisplayString (SIZE (0..3)) | RO | mandatory |
scalar · DisplayString (SIZE (0..3)) · read-only · mandatory The NTP Server timezone offset from GMT in hours. | ||||
| SagNewCfgNTPTzone | 1.3.6.1.4.1.1872.2.1.2.2.28.6 | DisplayString (SIZE (0..3)) | RW | mandatory |
scalar · DisplayString (SIZE (0..3)) · read-write · mandatory The NTP Server timezone offset from GMT in hours. | ||||
| SagCurCfgNTPDlight | 1.3.6.1.4.1.1872.2.1.2.2.28.7 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Enable/disable daylight savings time.
| ||||
| SagNewCfgNTPDlight | 1.3.6.1.4.1.1872.2.1.2.2.28.8 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Enable/disable daylight savings time.
| ||||
| SagCurCfgNTPService | 1.3.6.1.4.1.1872.2.1.2.2.28.9 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Enable/disable NTP Service.
| ||||
| SagNewCfgNTPService | 1.3.6.1.4.1.1872.2.1.2.2.28.10 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Enable/disable NTP Service.
| ||||
| NagLog | 1.3.6.1.4.1.1872.2.1.2.2.29 | |||
| SagNewCfgSyslogTrapConsole | 1.3.6.1.4.1.1872.2.1.2.2.29.1 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Enable or disable console syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapConsole | 1.3.6.1.4.1.1872.2.1.2.2.29.2 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Enable or disable console syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapSystem | 1.3.6.1.4.1.1872.2.1.2.2.29.3 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Enable or disable system level syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapSystem | 1.3.6.1.4.1.1872.2.1.2.2.29.4 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Enable or disable system level syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapMgmt | 1.3.6.1.4.1.1872.2.1.2.2.29.5 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Enable or disable management(flash, config, login) syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapMgmt | 1.3.6.1.4.1.1872.2.1.2.2.29.6 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Enable or disable management(flash, config, login) syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapCli | 1.3.6.1.4.1.1872.2.1.2.2.29.7 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Enable or disable CLI generated error syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapCli | 1.3.6.1.4.1.1872.2.1.2.2.29.8 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Enable or disable CLI generated error syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapStp | 1.3.6.1.4.1.1872.2.1.2.2.29.9 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Enable or disable spanning tree syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapStp | 1.3.6.1.4.1.1872.2.1.2.2.29.10 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Enable or disable spanning tree syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapVlan | 1.3.6.1.4.1.1872.2.1.2.2.29.11 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Enable or disable VLAN syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapVlan | 1.3.6.1.4.1.1872.2.1.2.2.29.12 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Enable or disable VLAN syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapSlb | 1.3.6.1.4.1.1872.2.1.2.2.29.13 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Enable or disable SLB syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapSlb | 1.3.6.1.4.1.1872.2.1.2.2.29.14 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Enable or disable SLB syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapGslb | 1.3.6.1.4.1.1872.2.1.2.2.29.15 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Enable or disable GSLB syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapGslb | 1.3.6.1.4.1.1872.2.1.2.2.29.16 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Enable or disable GSLB syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapFilter | 1.3.6.1.4.1.1872.2.1.2.2.29.17 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Enable or disable filter syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapFilter | 1.3.6.1.4.1.1872.2.1.2.2.29.18 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Enable or disable filter syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapSsh | 1.3.6.1.4.1.1872.2.1.2.2.29.19 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Enable or disable SSH, RADIUS syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapSsh | 1.3.6.1.4.1.1872.2.1.2.2.29.20 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Enable or disable SSH, RADIUS syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapVrrp | 1.3.6.1.4.1.1872.2.1.2.2.29.21 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Enable or disable VRRP syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapVrrp | 1.3.6.1.4.1.1872.2.1.2.2.29.22 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Enable or disable VRRP syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapBgp | 1.3.6.1.4.1.1872.2.1.2.2.29.23 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Enable or disable BGP syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapBgp | 1.3.6.1.4.1.1872.2.1.2.2.29.24 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Enable or disable BGP syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapNtp | 1.3.6.1.4.1.1872.2.1.2.2.29.25 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Enable or disable NTP syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapNtp | 1.3.6.1.4.1.1872.2.1.2.2.29.26 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Enable or disable NTP syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapIsd | 1.3.6.1.4.1.1872.2.1.2.2.29.27 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Enable or disable ISD syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapIsd | 1.3.6.1.4.1.1872.2.1.2.2.29.28 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Enable or disable ISD syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapIp | 1.3.6.1.4.1.1872.2.1.2.2.29.31 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Enable or disable IP related syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapIp | 1.3.6.1.4.1.1872.2.1.2.2.29.32 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Enable or disable IP related syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapWeb | 1.3.6.1.4.1.1872.2.1.2.2.29.35 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Enable or disable WEBUI related syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapWeb | 1.3.6.1.4.1.1872.2.1.2.2.29.36 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Enable or disable WEBUI related syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapSynAtk | 1.3.6.1.4.1.1872.2.1.2.2.29.37 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Enable or disable SYN attack detection related syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapSynAtk | 1.3.6.1.4.1.1872.2.1.2.2.29.38 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Enable or disable SYN attack detection related syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| SagNewCfgSyslogTrapTcpLim | 1.3.6.1.4.1.1872.2.1.2.2.29.39 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Enable or disable TCP rate limiting related syslog and SNMP trap, in the new_configuration block.
| ||||
| SagCurCfgSyslogTrapTcpLim | 1.3.6.1.4.1.1872.2.1.2.2.29.40 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Enable or disable TCP rate limiting related syslog and SNMP trap, as currently configured in the current_configuration block.
| ||||
| Nstats | 1.3.6.1.4.1.1872.2.1.8 | |||
| NmemStats | 1.3.6.1.4.1.1872.2.1.8.12 | |||
| SmemStatsAllocs | 1.3.6.1.4.1.1872.2.1.8.12.1 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory The total number of memory allocations. | ||||
| SmemStatsFrees | 1.3.6.1.4.1.1872.2.1.8.12.2 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory The total number of memory frees. | ||||
| SmemStatsAllocFails | 1.3.6.1.4.1.1872.2.1.8.12.3 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory The total number of memory allocations failed. | ||||
| SmemStatsBytesCurr | 1.3.6.1.4.1.1872.2.1.8.12.4 | Gauge | RO | mandatory |
scalar · Gauge · read-only · mandatory The outstanding memory in bytes have been allocated. | ||||
| SmemStatsBytesHiwat | 1.3.6.1.4.1.1872.2.1.8.12.5 | Gauge | RO | mandatory |
scalar · Gauge · read-only · mandatory Bytes allocated witch high water mark. | ||||
| SmemStatsPoolBytes | 1.3.6.1.4.1.1872.2.1.8.12.6 | Gauge | RO | mandatory |
scalar · Gauge · read-only · mandatory The total bytes in the memory pool. | ||||
| SmemStatsLargest | 1.3.6.1.4.1.1872.2.1.8.12.7 | Gauge | RO | mandatory |
scalar · Gauge · read-only · mandatory The largest block has been allocated. | ||||
| NpktStats | 1.3.6.1.4.1.1872.2.1.8.13 | |||
| SpktStatsAllocs | 1.3.6.1.4.1.1872.2.1.8.13.1 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory The total packets have been allocated. | ||||
| SpktStatsFrees | 1.3.6.1.4.1.1872.2.1.8.13.2 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory The total packets have been freed. | ||||
| SpktStatsAllocFails | 1.3.6.1.4.1.1872.2.1.8.13.3 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory The total packet allocations failed. | ||||
| SpktStatsMediums | 1.3.6.1.4.1.1872.2.1.8.13.4 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory The number of medium size packets have been allocated. | ||||
| SpktStatsJumbos | 1.3.6.1.4.1.1872.2.1.8.13.5 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory The number of jumbo size packets have been allocated. | ||||
| SpktStatsSmalls | 1.3.6.1.4.1.1872.2.1.8.13.6 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory The number of small size packets have been allocated. | ||||
| NmpCpuStats | 1.3.6.1.4.1.1872.2.1.8.16 | |||
| SmpCpuAStatsUtil1Second | 1.3.6.1.4.1.1872.2.1.8.16.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The utilization of MP CPU A over 1 second. It shows the percentage. | ||||
| SmpCpuBStatsUtil1Second | 1.3.6.1.4.1.1872.2.1.8.16.2 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The utilization of MP CPU B over 4 seconds. It shows the percentage. | ||||
| SmpCpuAStatsUtil4Seconds | 1.3.6.1.4.1.1872.2.1.8.16.3 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The utilization of MP CPU A over 4 seconds. It shows the percentage. | ||||
| SmpCpuBStatsUtil4Seconds | 1.3.6.1.4.1.1872.2.1.8.16.4 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The utilization of MP CPU B over 4 seconds. It shows the percentage. | ||||
| SmpCpuAStatsUtil64Seconds | 1.3.6.1.4.1.1872.2.1.8.16.5 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The utilization of MP CPU A over 64 seconds. It shows the percentage. | ||||
| SmpCpuBStatsUtil64Seconds | 1.3.6.1.4.1.1872.2.1.8.16.6 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The utilization of MP CPU B over 64 second. It shows the percentage. | ||||
| Ninformation | 1.3.6.1.4.1.1872.2.1.9 | |||
| NaltswitchTraps | 1.3.6.1.4.1.1872.2.1.13 | |||
| NoperCmds | 1.3.6.1.4.1.1872.2.1.14 | |||
| Nradius | 1.3.6.1.4.1.1872.2.1.16 | |||
| SradCurCfgPrimaryIpAddr | 1.3.6.1.4.1.1872.2.1.16.1 | IpAddress | RO | mandatory |
scalar · IpAddress · read-only · mandatory The IP address of the Primary RADIUS server. | ||||
| SradNewCfgPrimaryIpAddr | 1.3.6.1.4.1.1872.2.1.16.2 | IpAddress | RW | mandatory |
scalar · IpAddress · read-write · mandatory The IP address of the Primary RADIUS server. | ||||
| SradCurCfgSecondaryIpAddr | 1.3.6.1.4.1.1872.2.1.16.3 | IpAddress | RO | mandatory |
scalar · IpAddress · read-only · mandatory The IP address of the Secondary RADIUS server. | ||||
| SradNewCfgSecondaryIpAddr | 1.3.6.1.4.1.1872.2.1.16.4 | IpAddress | RW | mandatory |
scalar · IpAddress · read-write · mandatory The IP address of the Secondary RADIUS server. | ||||
| SradCurCfgPort | 1.3.6.1.4.1.1872.2.1.16.5 | INTEGER (1500..3000) | RO | mandatory |
scalar · INTEGER (1500..3000) · read-only · mandatory Specify the RADIUS port number. | ||||
| SradNewCfgPort | 1.3.6.1.4.1.1872.2.1.16.6 | INTEGER (1500..3000) | RW | mandatory |
scalar · INTEGER (1500..3000) · read-write · mandatory Speicfy the RADIUS port number. | ||||
| SradCurCfgTimeout | 1.3.6.1.4.1.1872.2.1.16.7 | INTEGER (1..10) | RO | mandatory |
scalar · INTEGER (1..10) · read-only · mandatory The maximum number of seconds before resending authentication to RADIUS server. | ||||
| SradNewCfgTimeout | 1.3.6.1.4.1.1872.2.1.16.8 | INTEGER (1..10) | RW | mandatory |
scalar · INTEGER (1..10) · read-write · mandatory The maximum number of seconds before resending authentication to RADIUS server. | ||||
| SradCurCfgRetries | 1.3.6.1.4.1.1872.2.1.16.9 | INTEGER (1..3) | RO | mandatory |
scalar · INTEGER (1..3) · read-only · mandatory Number of retries to the RADIUS server. | ||||
| SradNewCfgRetries | 1.3.6.1.4.1.1872.2.1.16.10 | INTEGER (1..3) | RW | mandatory |
scalar · INTEGER (1..3) · read-write · mandatory Number of retries to the RADIUS server. | ||||
| SradCurCfgState | 1.3.6.1.4.1.1872.2.1.16.11 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Enable or disbale RADIUS authentication.
| ||||
| SradNewCfgState | 1.3.6.1.4.1.1872.2.1.16.12 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Enable or disable RADIUS authentication.
| ||||
| SradCurCfgAuthenString | 1.3.6.1.4.1.1872.2.1.16.13 | DisplayString (SIZE (0..32)) | RO | mandatory |
scalar · DisplayString (SIZE (0..32)) · read-only · mandatory The RADIUS authentication string. | ||||
| SradNewCfgAuthenString | 1.3.6.1.4.1.1872.2.1.16.14 | DisplayString (SIZE (0..32)) | RW | mandatory |
scalar · DisplayString (SIZE (0..32)) · read-write · mandatory The RADIUS authentication string. | ||||
| SradCurCfgTelnet | 1.3.6.1.4.1.1872.2.1.16.15 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Enable or disbale RADIUS backdoor for telnet.
| ||||
| SradNewCfgTelnet | 1.3.6.1.4.1.1872.2.1.16.16 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Enable or disable RADIUS backdoor for telnet.
| ||||