ALPINE-GEN-CARD-TDCM-MIB
Alpine Optoelectronics Incsnmptranslate -m ALPINE-GEN-CARD-TDCM-MIB -Tpsnmpwalk -v2c -c <community> -m ALPINE-GEN-CARD-TDCM-MIB <host> 1.3.6.1.4.1.52326.1.2Imports
| ALPINE-ROOT | alpineGeneric |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NalpineGenCardTdcm | 1.3.6.1.4.1.52326.1.2 | ||||||||||||
| TalpineGenCardTdcmInfosTable | 1.3.6.1.4.1.52326.1.2.1 | NA | |||||||||||
table · not-accessible · current Description. | |||||||||||||
| RalpineGenCardTdcmInfosEntry | 1.3.6.1.4.1.52326.1.2.1.1 | NA | |||||||||||
| CgctiSlotNum | 1.3.6.1.4.1.52326.1.2.1.1.1 | Integer32 (1..2) | RO | 1 | |||||||||
column · Integer32 (1..2) · read-only · current Slot number. Example values from LibreNMS test devices
| |||||||||||||
| CgctiWorkMode | 1.3.6.1.4.1.52326.1.2.1.1.2 | Integer32 (1..2) | RW | 1 | |||||||||
column · Integer32 (1..2) · read-write · current Work mode of TDCM. 1. Manual Mode. 2. Auto Mode. Example values from LibreNMS test devices
| |||||||||||||
| CgctiDefaultDispersion | 1.3.6.1.4.1.52326.1.2.1.1.3 | Integer32 | RW | -314 | |||||||||
column · Integer32 · read-write · current The default dipersion value for line card startup.
Example values from LibreNMS test devices
| |||||||||||||
| CgctiCurrentDispersion | 1.3.6.1.4.1.52326.1.2.1.1.4 | Integer32 | RO | -314 | |||||||||
column · Integer32 · read-only · current Current dispersion setting.
Example values from LibreNMS test devices
| |||||||||||||
| CgctiAutoModeSwitch | 1.3.6.1.4.1.52326.1.2.1.1.5 | Integer32 (1..2) | RW | 2 | |||||||||
column · Integer32 (1..2) · read-write · current Turn on/off auto engine when current work mode is auto. 1. Turn on auto monitor and tunning for current monitor fiber. 2. Turn off auto monitor and tunning. Note, this value is only available when current work mode 'gctiWorkMode' is auto. Example values from LibreNMS test devices
| |||||||||||||
| CgctiSaveConfig | 1.3.6.1.4.1.52326.1.2.1.1.6 | Integer32 (0..2) | RW | 0 | |||||||||
column · Integer32 (0..2) · read-write · current Save current configuration into flash for non-valatile setting. 0: Idle/Save Done. 1: Issue save command. 2: Saving. Only value 1 can be accepted in snmp set. Example values from LibreNMS test devices
| |||||||||||||