ALPINE-GEN-CARD-EDFA-MIB
Alpine Optoelectronics Incsnmptranslate -m ALPINE-GEN-CARD-EDFA-MIB -Tpsnmpwalk -v2c -c <community> -m ALPINE-GEN-CARD-EDFA-MIB <host> 1.3.6.1.4.1.52326.1.1Imports
| ALPINE-ROOT | alpineGeneric |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NalpineGenCardEdfa | 1.3.6.1.4.1.52326.1.1 | ||||||||||||
| TalpineGenCardEdfaInfosTable | 1.3.6.1.4.1.52326.1.1.1 | NA | |||||||||||
table · not-accessible · current Description. | |||||||||||||
| RalpineGenCardEdfaInfosEntry | 1.3.6.1.4.1.52326.1.1.1.1 | NA | |||||||||||
| CgceSlotNum | 1.3.6.1.4.1.52326.1.1.1.1.1 | Integer32 (1..2) | RO | 2 | |||||||||
column · Integer32 (1..2) · read-only · current Slot number. Example values from LibreNMS test devices
| |||||||||||||
| CgceEdfaNum | 1.3.6.1.4.1.52326.1.1.1.1.2 | Integer32 (1..2) | RO | 1 | |||||||||
column · Integer32 (1..2) · read-only · current EDFA Number in the line card. Up to 2 EDFA modules are supported in one line card. Example values from LibreNMS test devices
| |||||||||||||
| CgceMode | 1.3.6.1.4.1.52326.1.1.1.1.3 | Integer32 (1..2) | RW | 1 | |||||||||
column · Integer32 (1..2) · read-write · current Work mode of EDFA. 1. AGC 2. APC Please note, when you want to change work mode, make sure the relative target value be set first. For example, if you want to set work mode to APC and the output power is 5dBm, you need set 'gceOutputPowerTarget' to 5 first. Example values from LibreNMS test devices
| |||||||||||||
| CgceOutputPowerTarget | 1.3.6.1.4.1.52326.1.1.1.1.4 | OCTET STRING (SIZE (1..8)) | RW | 5.00 | |||||||||
column · OCTET STRING (SIZE (1..8)) · read-write · current Output power target of EDFA. If current work mode is APC, then output power will be applied immediately. If current work mode is AGC, then output power will be applied after 'gceMode' is set to APC.
Example values from LibreNMS test devices
| |||||||||||||
| CgceGainTarget | 1.3.6.1.4.1.52326.1.1.1.1.5 | OCTET STRING (SIZE (1..8)) | RW | 15.00 | |||||||||
column · OCTET STRING (SIZE (1..8)) · read-write · current Gain target of EDFA. If current work mode is AGC, then output power will be applied immediately. If current work mode is APC, then output power will be applied after 'gceMode' is set to AGC.
Example values from LibreNMS test devices
| |||||||||||||
| CgceOutputPower | 1.3.6.1.4.1.52326.1.1.1.1.6 | OCTET STRING (SIZE (1..8)) | RO | 9.90 | |||||||||
column · OCTET STRING (SIZE (1..8)) · read-only · current Current output power of EDFA.
Example values from LibreNMS test devices
| |||||||||||||
| CgceGain | 1.3.6.1.4.1.52326.1.1.1.1.7 | OCTET STRING (SIZE (1..8)) | RO | 15.10 | |||||||||
column · OCTET STRING (SIZE (1..8)) · read-only · current Current gain of EDFA.
Example values from LibreNMS test devices
| |||||||||||||
| CgceTemperature | 1.3.6.1.4.1.52326.1.1.1.1.8 | OCTET STRING (SIZE (1..8)) | RO | 41.50 | |||||||||
column · OCTET STRING (SIZE (1..8)) · read-only · current Current temperature of EDFA. Example values from LibreNMS test devices
| |||||||||||||
| CgceSaveConfig | 1.3.6.1.4.1.52326.1.1.1.1.9 | Integer32 (0..2) | RW | 0 | |||||||||
column · Integer32 (0..2) · read-write · current Save current configuration into flash for non-valatile setting. 0: Idle/Save Done. 1: Issue save command. 2: Saving. Only value 1 can be accepted in snmp set. Example values from LibreNMS test devices
| |||||||||||||
| CgceInputPower | 1.3.6.1.4.1.52326.1.1.1.1.10 | OCTET STRING (SIZE (1..8)) | RO | -5.20 | |||||||||
column · OCTET STRING (SIZE (1..8)) · read-only · current Current input power of EDFA.
Example values from LibreNMS test devices
| |||||||||||||
| NalpineGenCardEdfaAlarm | 1.3.6.1.4.1.52326.1.1.2 | ||||||||||||
| TalpineGenCardEdfaAlarmThldTable | 1.3.6.1.4.1.52326.1.1.2.1 | NA | |||||||||||
table · not-accessible · current Description. | |||||||||||||
| RalpineGenCardEdfaAlarmThldEntry | 1.3.6.1.4.1.52326.1.1.2.1.1 | NA | |||||||||||
| CgceaSlotNum | 1.3.6.1.4.1.52326.1.1.2.1.1.1 | Integer32 (1..2) | RO | 2 | |||||||||
column · Integer32 (1..2) · read-only · current Slot number. Example values from LibreNMS test devices
| |||||||||||||
| CgceaEdfaNum | 1.3.6.1.4.1.52326.1.1.2.1.1.2 | Integer32 (1..2) | RO | 1 | |||||||||
column · Integer32 (1..2) · read-only · current EDFA Number in the line card. Up to 2 EDFA modules are supported in one line card. Example values from LibreNMS test devices
| |||||||||||||
| CgceaInputPowerThld | 1.3.6.1.4.1.52326.1.1.2.1.1.3 | OCTET STRING (SIZE (1..8)) | RW | -25.00 | |||||||||
column · OCTET STRING (SIZE (1..8)) · read-write · current Low threshold of input power.
Example values from LibreNMS test devices
| |||||||||||||
| CgceaOutputPowerThld | 1.3.6.1.4.1.52326.1.1.2.1.1.4 | OCTET STRING (SIZE (1..8)) | RW | -6.00 | |||||||||
column · OCTET STRING (SIZE (1..8)) · read-write · current Low threshold of output power.
Example values from LibreNMS test devices
| |||||||||||||
| CgceaTemperatureThld | 1.3.6.1.4.1.52326.1.1.2.1.1.5 | OCTET STRING (SIZE (1..8)) | RW | 75.00 | |||||||||
column · OCTET STRING (SIZE (1..8)) · read-write · current High threshold of temperature.
Example values from LibreNMS test devices
| |||||||||||||
| TalpineGenEdfaAlarmInfoTable | 1.3.6.1.4.1.52326.1.1.2.2 | NA | |||||||||||
table · not-accessible · current Description. | |||||||||||||
| RalpineGenEdfaAlarmInfoEntry | 1.3.6.1.4.1.52326.1.1.2.2.1 | NA | |||||||||||
| CgeaiSlotNum | 1.3.6.1.4.1.52326.1.1.2.2.1.1 | Integer32 (1..2) | RO | 2 | |||||||||
column · Integer32 (1..2) · read-only · current Description. Example values from LibreNMS test devices
| |||||||||||||
| CgeaiEdfaNum | 1.3.6.1.4.1.52326.1.1.2.2.1.2 | Integer32 (1..2) | RO | 1 | |||||||||
column · Integer32 (1..2) · read-only · current EDFA Number in the line card. Up to 2 EDFA modules are supported in one line card. Example values from LibreNMS test devices
| |||||||||||||
| CgeaiCommonAlarm | 1.3.6.1.4.1.52326.1.1.2.2.1.3 | Integer32 (0..1) | RO | 0 | |||||||||
column · Integer32 (0..1) · read-only · current If any alarm occurs, this field will set to 1. 0. Normal 1. One or some alarm occur. Example values from LibreNMS test devices
| |||||||||||||
| CgeaiCaseTemperatureAlarm | 1.3.6.1.4.1.52326.1.1.2.2.1.4 | Integer32 (0..1) | RO | 0 | |||||||||
column · Integer32 (0..1) · read-only · current 0. Clear 1. Case temperature alarm occurs. Example values from LibreNMS test devices
| |||||||||||||
| CgeaiPumpTemperatureAlarm | 1.3.6.1.4.1.52326.1.1.2.2.1.5 | Integer32 (0..1) | RO | 0 | |||||||||
column · Integer32 (0..1) · read-only · current 0. Clear 1. Pump temperature alarm occurs. Example values from LibreNMS test devices
| |||||||||||||
| CgeaiPumpBiasAlarm | 1.3.6.1.4.1.52326.1.1.2.2.1.6 | Integer32 (0..1) | RO | 0 | |||||||||
column · Integer32 (0..1) · read-only · current 0. Clear 1. Pump bias alarm occurs. Example values from LibreNMS test devices
| |||||||||||||
| CgeaiLossInputAlarm | 1.3.6.1.4.1.52326.1.1.2.2.1.7 | Integer32 (0..1) | RO | 0 | |||||||||
column · Integer32 (0..1) · read-only · current 0. Clear 1. Loss of input alarm occurs. Example values from LibreNMS test devices
| |||||||||||||
| CgeaiLossOutputAlarm | 1.3.6.1.4.1.52326.1.1.2.2.1.8 | Integer32 (0..1) | RO | 0 | |||||||||
column · Integer32 (0..1) · read-only · current 0. Clear 1. Loss of output alarm occurs. Example values from LibreNMS test devices
| |||||||||||||
| !alpineGenEdfaPowerAlarm | 1.3.6.1.4.1.52326.1.1.2.3 | ||||||||||||
| !alpineGenEdfaTemperatureAlarm | 1.3.6.1.4.1.52326.1.1.2.4 | ||||||||||||
notification · current Description. | |||||||||||||
| !alpineGenEdfaBiasAlarm | 1.3.6.1.4.1.52326.1.1.2.5 | ||||||||||||
| !alpineGenEdfaLossAlarm | 1.3.6.1.4.1.52326.1.1.2.6 | ||||||||||||
Traps / Notifications
- alpineGenEdfaBiasAlarm
1.3.6.1.4.1.52326.1.1.2.5 - alpineGenEdfaLossAlarm
1.3.6.1.4.1.52326.1.1.2.6 - alpineGenEdfaPowerAlarm
1.3.6.1.4.1.52326.1.1.2.3 - alpineGenEdfaTemperatureAlarm
1.3.6.1.4.1.52326.1.1.2.4