ALPHA-NOTIFICATION-MIB
Argus TechnologiesThis MIB defines the notification block(s) available in system controllers.
snmptranslate -m ALPHA-NOTIFICATION-MIB -Tpsnmpwalk -v2c -c <community> -m ALPHA-NOTIFICATION-MIB <host> 1.3.6.1.4.1.7309.100Imports
| ALARM-MIB | alarmActiveModelPointer, alarmActiveResourceId, alarmModelDescription |
|---|---|
| ALPHA-RESOURCE-MIB | alpha, componentListReference, componentListStaticName, controllerInfoName |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IalphaAlarmNotifications | 1.3.6.1.4.1.7309.100 | |||
identity This MIB defines the notification block(s) available in system controllers. | ||||
| !alphaAlarmActiveState | 1.3.6.1.4.1.7309.100.1 | |||
notification · current SNMPv2 notification varbinds start with SysUptime and Notification Oid as the first two in the list by default. The first varbind in this definition would be the third varbind in the raw output of the notification. An instance of the alarm indicated by alarmActiveModelPointer has been raised against the entity indicated by alarmActiveResourceId. The state of the alarm is indicated by the alarmModelState. The description of the alarm along with its source is indicated by the alarmModelDescription and componentListStaticName respectively. componentListSnmpId provides the Id set to the source of the alarm. The agent must throttle the generation of consecutive alarmActiveState traps so that there is at least a two-second gap between traps of this type against the same alarmActiveModelPointer and alarmActiveResourceId. When traps are throttled, they are queued for sending at a future time. A management application should periodically check the value of alarmActiveLastChanged to detect any missed alarmActiveState notification-events, e.g., due to throttling or transmission loss. | ||||
| !alphaAlarmClearState | 1.3.6.1.4.1.7309.100.2 | |||
notification · current SNMPv2 notification varbinds start with SysUptime and Notification Oid as the first two in the list by default. The first varbind in this definition would be the third varbind in the raw output of the notification. An instance of the alarm indicated by alarmActiveModelPointer has been cleared against the entity indicated by alarmActiveResourceId. The state of the alarm is indicated by the alarmModelState. The description of the alarm along with its source is indicated by the alarmModelDescription and componentListStaticName respectively. componentListSnmpId provides the Id set to the source of the alarm. The agent must throttle the generation of consecutive alarmActiveClear traps so that there is at least a two-second gap between traps of this type against the same alarmActiveModelPointer and alarmActiveResourceId. When traps are throttled, they are queued for sending at a future time. A management application should periodically check the value of alarmActiveLastChanged to detect any missed alarmClearState notification-events, e.g., due to throttling or transmission loss. | ||||
| NalphaAlarmNotificationConformance | 1.3.6.1.4.1.7309.100.102 | |||
| NalphaAlarmNotificationCompliances | 1.3.6.1.4.1.7309.100.102.1 | |||
| MalphaAlarmNotificationCompliance | 1.3.6.1.4.1.7309.100.102.1.1 | |||
compliance · current The compliance statement for systems supporting the alpha MIB. | ||||
| NalphaAlarmNotificationGroups | 1.3.6.1.4.1.7309.100.102.1.2 | |||
| GalphaParameterGroup | 1.3.6.1.4.1.7309.100.102.1.2.1 | |||
group · current Active alpha list group. | ||||
| GalphaNotificationsGroup | 1.3.6.1.4.1.7309.100.102.1.2.2 | |||
group · current The collection of notifications that can be used to model alarms for faults lacking pre-existing notification definitions. | ||||
| NalphaAlarmNotificationsExtension | 1.3.6.1.4.1.7309.101 | |||
| SalarmSeverity | 1.3.6.1.4.1.7309.101.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current User defined value used for filtering purposes. | ||||
| SalarmCustomDescription | 1.3.6.1.4.1.7309.101.2 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current User defined value used for filtering purposes. | ||||
| SalarmPriority | 1.3.6.1.4.1.7309.101.3 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current User defined value used for filtering purposes. | ||||
| SalarmAdditionalInformation | 1.3.6.1.4.1.7309.101.4 | OCTET STRING | RO | |
scalar · OCTET STRING · read-only · current Additional information about the alarm. Each piece of information is separated by 2 colons ::. The following are currently provided - Physical location, in the format bay-shelf-slot-channel (used by LP Module alarms) - What alert is producing this alarm (used by LP Module alarms) | ||||
Traps / Notifications
- alphaAlarmActiveState
1.3.6.1.4.1.7309.100.1 - alphaAlarmClearState
1.3.6.1.4.1.7309.100.2