ALGPOWER-v2-MIB
ALGcomsnmptranslate -m ALGPOWER-v2-MIB -Tpsnmpwalk -v2c -c <community> -m ALGPOWER-v2-MIB <host> 1.3.6.1.4.1.49136Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Nalgcom | 1.3.6.1.4.1.49136 | ||||||||||||
| NupsObjects | 1.3.6.1.4.1.49136.1 | ||||||||||||
| Noutput | 1.3.6.1.4.1.49136.1.1 | ||||||||||||
| SoutputVoltage | 1.3.6.1.4.1.49136.1.1.1 | INTEGER | RO | mandatory | 539 | ||||||||
scalar · INTEGER · read-only · mandatory Numeric value of instantaneous output voltage from the source in tenths of a volt. To get the value actual in volt should be divided by 10. Example: Read value 241, actual value 24.1V. Example values from LibreNMS test devices
| |||||||||||||
| SoutputCurrent | 1.3.6.1.4.1.49136.1.1.2 | INTEGER | RO | mandatory | 1374 | ||||||||
scalar · INTEGER · read-only · mandatory Numeric value of current output of converter AC/DC. Real value reading in milli ampere. Example: Read value 1087, Actual value 1.087 milli ampere or 1.087A. If the output is '0' the AC/DC is off and the output for the equipments is provide from batteries Example values from LibreNMS test devices
| |||||||||||||
| SoidNotUsed0 | 1.3.6.1.4.1.49136.1.1.3 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory OID not used. | |||||||||||||
| SoidNotUsed1 | 1.3.6.1.4.1.49136.1.1.4 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory OID not used. | |||||||||||||
| Nbattery | 1.3.6.1.4.1.49136.1.2 | ||||||||||||
| SbatteryVoltage | 1.3.6.1.4.1.49136.1.2.1 | INTEGER | RO | mandatory | 539 | ||||||||
scalar · INTEGER · read-only · mandatory Numeric value of instantaneous voltage of battery bank. To get the actual value in volt must be divided by 10. Example: Read value 240, actual value 24.0V. Example values from LibreNMS test devices
| |||||||||||||
| SbatteryCurrent | 1.3.6.1.4.1.49136.1.2.2 | INTEGER | RO | mandatory | 0 | ||||||||
scalar · INTEGER · read-only · mandatory Numeric value of current in Battery bank. Real value reading in milli ampere. If the value is negative the Battery bank is provide energy for the output. If the value is positive the Battery bank is under charger Example: Read value -2230, Actual value 2,230 ampere and the battery bank is provide this current. Read value 3000, Actual value 3.000 milli ampere and the battery bank is absorve this current. Example values from LibreNMS test devices
| |||||||||||||
| SchargerStatus | 1.3.6.1.4.1.49136.1.2.3 | INTEGER | RO | mandatory | 5 | ||||||||
scalar · INTEGER · read-only · mandatory Show the status of battery charger:
0 - The battery is not connected in DC UPS;
1 - The battery is voltage incompatible with DC UPS;
2 - The DC UPS is in nobreak mode;
3 - The charger of Battery is in Bulk stage;
4 - The charger of Battery is Absorption stage;
5 - The charger of Battery is Float stage;
6 - The Battery will be disconnected in 30s due to
low voltage and the DC-UPS output will be
turned off.
7 - The Battery is under testExample values from LibreNMS test devices
| |||||||||||||
| Ninput | 1.3.6.1.4.1.49136.1.3 | ||||||||||||
| SalarmOnBattery | 1.3.6.1.4.1.49136.1.3.1 | INTEGER | RO | mandatory | 0 | ||||||||
scalar · INTEGER · read-only · mandatory Shows the operation mode of DC-UPS: 0 - The DC-UPS output is provide by AC energy. 1 - The DC-UPS output is provide by Battery Example values from LibreNMS test devices
| |||||||||||||
| SacFail | 1.3.6.1.4.1.49136.1.3.2 | INTEGER | RO | mandatory | 0 | ||||||||
scalar · INTEGER · read-only · mandatory Alarm that alert about AC outages in the last 10 minutes: 0 - DC-UPS in normal operation. 1 - Occur a AC fail in the last 10 minutes. Example values from LibreNMS test devices
| |||||||||||||
| SbatteryCharging | 1.3.6.1.4.1.49136.1.3.3 | INTEGER | RO | mandatory | 1 | ||||||||
scalar · INTEGER · read-only · mandatory Show the status of charging Battery: 1 - The battery is on charging. 0 - The battery is on discharging. Example values from LibreNMS test devices
| |||||||||||||
| SbatteryDischarging | 1.3.6.1.4.1.49136.1.3.4 | INTEGER | RO | mandatory | 0 | ||||||||
scalar · INTEGER · read-only · mandatory Show the status of discharging Battery: 1 - The battery is on discharging. 0 - The battery is on charging. Example values from LibreNMS test devices
| |||||||||||||
| Soverheat | 1.3.6.1.4.1.49136.1.3.5 | INTEGER | RO | mandatory | 0 | ||||||||
scalar · INTEGER · read-only · mandatory Alarm that alert about overtemperature of DC-UPS 1 - The DC-UPS is in condition of overtemperature. 0 - The DC-UPS is in normal condition. Example values from LibreNMS test devices
| |||||||||||||
| Soverload | 1.3.6.1.4.1.49136.1.3.6 | INTEGER | RO | mandatory | 0 | ||||||||
scalar · INTEGER · read-only · mandatory Alarm that alert about overload of DC-UPS 1 - The DC-UPS is in condition of overload. 0 - The DC-UPS is in normal condition. Example values from LibreNMS test devices
| |||||||||||||
| SfanAfail | 1.3.6.1.4.1.49136.1.3.7 | INTEGER | RO | mandatory | 0 | ||||||||
scalar · INTEGER · read-only · mandatory Alarm that alert about fail in internal FAN A 1 - Internal FAN with fail. 0 - Internal FAN ok Example values from LibreNMS test devices
| |||||||||||||
| SfanBfail | 1.3.6.1.4.1.49136.1.3.8 | INTEGER | RO | mandatory | 0 | ||||||||
scalar · INTEGER · read-only · mandatory Alarm that alert about fail in internal FAN B 1 - Internal FAN with fail. 0 - Internal FAN ok Example values from LibreNMS test devices
| |||||||||||||
| SoidNotUsed2 | 1.3.6.1.4.1.49136.1.3.9 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory OID not used. | |||||||||||||
| SoidNotUsed3 | 1.3.6.1.4.1.49136.1.3.10 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory OID not used. | |||||||||||||
| SupTime | 1.3.6.1.4.1.49136.1.3.11 | INTEGER | RO | mandatory | 264 | ||||||||
scalar · INTEGER · read-only · mandatory System Up time in hours Example values from LibreNMS test devices
| |||||||||||||
| Ntemperature | 1.3.6.1.4.1.49136.1.4 | ||||||||||||
| SinnerTemperature | 1.3.6.1.4.1.49136.1.4.1 | INTEGER | RO | mandatory | 37 | ||||||||
scalar · INTEGER · read-only · mandatory Show the internal temperature of power supply. Uses the unit degree Celsius. Example Read value: 25, temperature is 25degC. Example values from LibreNMS test devices
| |||||||||||||
| SouterTemperature | 1.3.6.1.4.1.49136.1.4.2 | INTEGER | RO | mandatory | 0 | ||||||||
scalar · INTEGER · read-only · mandatory Show the temperature of external sensor (cable that comes with power supply). Uses the unit degree Celsius. Example Read value: 25, temperature is 25degC. Example values from LibreNMS test devices
| |||||||||||||
| SheatSinkTemperature | 1.3.6.1.4.1.49136.1.4.3 | INTEGER | RO | mandatory | 28 | ||||||||
scalar · INTEGER · read-only · mandatory Show the temperature of sensor in the heatsink of power supply use the unit degree Celsius. Example Read value: 25, temperature is 25degC. Example values from LibreNMS test devices
| |||||||||||||
| Nwatchdog | 1.3.6.1.4.1.49136.1.5 | ||||||||||||
| SwatchdogPing1 | 1.3.6.1.4.1.49136.1.5.1 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory Alarm indicating the action of watchdog 1
programmed in the last 10 minutes. The watchdog
acts on the output by turning it off when not
receive response from IP ping command
configured.
1 - The watchdog 1 acted on the output the last 10
minutes.
0 - The Watchdog 1 has not acted in the last 10
minutes. | |||||||||||||
| SwatchdogPing2 | 1.3.6.1.4.1.49136.1.5.2 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory Alarm indicating the action of watchdog 2
programmed in the last 10 minutes. The watchdog
acts on the output by turning it off when not
receive response from IP ping command
configured.
1 - The watchdog 2 acted on the output the last 10
minutes.
0 - The Watchdog 2 has not acted in the last 10
minutes. | |||||||||||||
| SwatchdogPing3 | 1.3.6.1.4.1.49136.1.5.3 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory Alarm indicating the action of watchdog 3
programmed in the last 10 minutes. The watchdog
acts on the output by turning it off when not
receive response from IP ping command
configured.
1 - The watchdog 3 acted on the output the last 10
minutes.
0 - The Watchdog 3 has not acted in the last 10
minutes. | |||||||||||||
| SwatchdogPing4 | 1.3.6.1.4.1.49136.1.5.4 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory Alarm indicating the action of watchdog 4
programmed in the last 10 minutes. The watchdog
acts on the output by turning it off when not
receive response from IP ping command
configured.
1 - The watchdog 4 acted on the output the last 10
minutes.
0 - The Watchdog 4 has not acted in the last 10
minutes. | |||||||||||||
| SwatchdogPing5 | 1.3.6.1.4.1.49136.1.5.5 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory Alarm indicating the action of watchdog 5
programmed in the last 10 minutes. The watchdog
acts on the output by turning it off when not
receive response from IP ping command
configured.
1 - The watchdog 5 acted on the output the last 10
minutes.
0 - The Watchdog 5 has not acted in the last 10
minutes. | |||||||||||||
| SwatchdogPing6 | 1.3.6.1.4.1.49136.1.5.6 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory Alarm indicating the action of watchdog 6
programmed in the last 10 minutes. The watchdog
acts on the output by turning it off when not
receive response from IP ping command
configured.
1 - The watchdog 6 acted on the output the last 10
minutes.
0 - The Watchdog 6 has not acted in the last 10
minutes. | |||||||||||||
| SwatchdogPing7 | 1.3.6.1.4.1.49136.1.5.7 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory Alarm indicating the action of watchdog 7
programmed in the last 10 minutes. The watchdog
acts on the output by turning it off when not
receive response from IP ping command
configured.
1 - The watchdog 7 acted on the output the last 10
minutes.
0 - The Watchdog 7 has not acted in the last 10
minutes. | |||||||||||||
| SwatchdogPing8 | 1.3.6.1.4.1.49136.1.5.8 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory Alarm indicating the action of watchdog 8
programmed in the last 10 minutes. The watchdog
acts on the output by turning it off when not
receive response from IP ping command
configured.
1 - The watchdog 8 acted on the output the last 10
minutes.
0 - The Watchdog 8 has not acted in the last 10
minutes. | |||||||||||||
| SwatchdogPing9 | 1.3.6.1.4.1.49136.1.5.9 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory Alarm indicating the action of watchdog 9
programmed in the last 10 minutes. The watchdog
acts on the output by turning it off when not
receive response from IP ping command
configured.
1 - The watchdog 9 acted on the output the last 10
minutes.
0 - The Watchdog 9 has not acted in the last 10
minutes. | |||||||||||||
| SwatchdogPing10 | 1.3.6.1.4.1.49136.1.5.10 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory Alarm indicating the action of watchdog 10
programmed in the last 10 minutes. The watchdog
acts on the output by turning it off when not
receive response from IP ping command
configured.
1 - The watchdog 10 acted on the output the last 10
minutes.
0 - The Watchdog 10 has not acted in the last 10
minutes. | |||||||||||||
| Nsupply | 1.3.6.1.4.1.49136.1.6 | ||||||||||||
| SsupplyVoltage | 1.3.6.1.4.1.49136.1.6.1 | INTEGER | RO | mandatory | 0 | ||||||||
scalar · INTEGER · read-only · mandatory The supply AC voltage decivolt [dV] Numeric value of instantaneous input voltage. An optional sensor is required to read this value. To get the actual value in volt it should be divided by 10. Example: Read value 2410, actual value 241 Vac. Example values from LibreNMS test devices
| |||||||||||||
| Ninstallation | 1.3.6.1.4.1.49136.1.7 | ||||||||||||
| SpopName | 1.3.6.1.4.1.49136.1.7.1 | DisplayString (SIZE (30)) | RO | mandatory | |||||||||
scalar · DisplayString (SIZE (30)) · read-only · mandatory PoP name | |||||||||||||
| SfacilityAddr | 1.3.6.1.4.1.49136.1.7.2 | DisplayString (SIZE (40)) | RO | mandatory | |||||||||
scalar · DisplayString (SIZE (40)) · read-only · mandatory Facility address | |||||||||||||
| SfacilityCity | 1.3.6.1.4.1.49136.1.7.3 | DisplayString (SIZE (30)) | RO | mandatory | |||||||||
scalar · DisplayString (SIZE (30)) · read-only · mandatory Facility city | |||||||||||||
| SinstDate | 1.3.6.1.4.1.49136.1.7.4 | DisplayString (SIZE (10)) | RO | mandatory | |||||||||
scalar · DisplayString (SIZE (10)) · read-only · mandatory Installation date | |||||||||||||
| SbatCapacity | 1.3.6.1.4.1.49136.1.7.5 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory Battery capacity | |||||||||||||
| SbatBrand | 1.3.6.1.4.1.49136.1.7.6 | DisplayString (SIZE (30)) | RO | mandatory | |||||||||
scalar · DisplayString (SIZE (30)) · read-only · mandatory Battery brand | |||||||||||||
| SbatInstDate | 1.3.6.1.4.1.49136.1.7.7 | DisplayString (SIZE (10)) | RO | mandatory | |||||||||
scalar · DisplayString (SIZE (10)) · read-only · mandatory Battery installation date | |||||||||||||
| SrespPers | 1.3.6.1.4.1.49136.1.7.8 | DisplayString (SIZE (50)) | RO | mandatory | |||||||||
scalar · DisplayString (SIZE (50)) · read-only · mandatory Responsible person | |||||||||||||
| Nbat-tst | 1.3.6.1.4.1.49136.1.8 | ||||||||||||
| Sbtst-date | 1.3.6.1.4.1.49136.1.8.1 | DisplayString (SIZE (10)) | RO | mandatory | |||||||||
scalar · DisplayString (SIZE (10)) · read-only · mandatory Battery test execution date (dd/mm/yyyy) | |||||||||||||
| Sbtst-status | 1.3.6.1.4.1.49136.1.8.2 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory Battery test status 0 - NEVER DONE 1 - Passed 2 - Running 3 - Aborted 4 - Failed | |||||||||||||
| Sbtst-duration | 1.3.6.1.4.1.49136.1.8.3 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory Programmed test duration in minutes * 999 - Perform the test until battery is fully discharged | |||||||||||||
| Sbtst-elapsed | 1.3.6.1.4.1.49136.1.8.4 | INTEGER | RO | mandatory | |||||||||
scalar · INTEGER · read-only · mandatory Elapsed time in current\last battery test | |||||||||||||
| Sbtst-volt-i | 1.3.6.1.4.1.49136.1.8.5 | INTEGER | RO | mandatory | 517 | ||||||||
scalar · INTEGER · read-only · mandatory The battery initial voltage [dV] Numeric value of battery voltage when starting the battery test. Example: Read value 241, actual value 24.1 V. Example values from LibreNMS test devices
| |||||||||||||
| Sbtst-amp-i | 1.3.6.1.4.1.49136.1.8.6 | INTEGER | RO | mandatory | -1581 | ||||||||
scalar · INTEGER · read-only · mandatory The battery initial cuurent [mA] Numeric value of battery current when starting the battery test. Example: Read value 1522, actual value 1.55 A. Example values from LibreNMS test devices
| |||||||||||||
| Sbtst-volt-f | 1.3.6.1.4.1.49136.1.8.7 | INTEGER | RO | mandatory | 419 | ||||||||
scalar · INTEGER · read-only · mandatory The battery final voltage [dV] Numeric value of battery voltage when the battery test is done. Example: Read value 225, actual value 22.5 V. Example values from LibreNMS test devices
| |||||||||||||
| Sbtst-amp-f | 1.3.6.1.4.1.49136.1.8.8 | INTEGER | RO | mandatory | -1897 | ||||||||
scalar · INTEGER · read-only · mandatory The battery initial cuurent [mA] Numeric value of battery current when the battery test is done. Example: Read value 1485, actual value 1.48 A. Example values from LibreNMS test devices
| |||||||||||||