AX1240S
ALAXALA Networks Corporationsnmptranslate -m AX1240S -Tpsnmpwalk -v2c -c <community> -m AX1240S <host> 1.3.6.1.4.1.21839Imports
| BRIDGE-MIB | BridgeId, Timeout |
|---|---|
| IF-MIB | InterfaceIndex, ifIndex |
| INET-ADDRESS-MIB | InetAddress, InetAddressType |
| IPV6-TC | Ipv6Address, Ipv6AddressPrefix, Ipv6IfIndex |
| OSPF-MIB | AreaID, BigMetric, DesignatedRouterPriority, HelloRange, Metric, PositiveInteger, RouterID, Status, UpToMaxAge |
| Q-BRIDGE-MIB | PortList |
| RFC1155-SMI | Counter32, Gauge32 |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Counter64, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TRAP-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Nalaxala | 1.3.6.1.4.1.21839 | |||
| NalaxalaProductId | 1.3.6.1.4.1.21839.1 | |||
| NaxSwitch | 1.3.6.1.4.1.21839.1.2 | |||
| Nax1240s | 1.3.6.1.4.1.21839.1.2.13 | |||
| Nax1250s | 1.3.6.1.4.1.21839.1.2.14 | |||
| Nax2230s | 1.3.6.1.4.1.21839.1.2.18 | |||
| Nax2130s | 1.3.6.1.4.1.21839.1.2.25 | |||
| NalaxalaMib | 1.3.6.1.4.1.21839.2 | |||
| NaxsEx | 1.3.6.1.4.1.21839.2.2 | |||
| NaxsMib | 1.3.6.1.4.1.21839.2.2.1 | |||
| NaxsStats | 1.3.6.1.4.1.21839.2.2.1.1 | |||
| NaxsIfStats | 1.3.6.1.4.1.21839.2.2.1.1.4 | |||
| TaxsIfStatsTable | 1.3.6.1.4.1.21839.2.2.1.1.4.1 | NA | mandatory | |
table · not-accessible · mandatory A table containing extension statistics for more than 100,000,000 bps interface. | ||||
| RaxsIfStatsEntry | 1.3.6.1.4.1.21839.2.2.1.1.4.1.1 | NA | mandatory | |
row · not-accessible · mandatory An entry containing extension statistics for interface.
| ||||
| CaxsIfStatsIndex | 1.3.6.1.4.1.21839.2.2.1.1.4.1.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory This object value is same as Ifindex which interface index of a system. | ||||
| CaxsIfStatsName | 1.3.6.1.4.1.21839.2.2.1.1.4.1.1.2 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory Interfaces name. Same as ifDescr. | ||||
| CaxsIfStatsInMegaOctets | 1.3.6.1.4.1.21839.2.2.1.1.4.1.1.3 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory Number of octets that received on the interface. This value is displayed in mega-octets(M). Value of 0 through 999,999 are rounded down. | ||||
| CaxsIfStatsInUcastMegaPkts | 1.3.6.1.4.1.21839.2.2.1.1.4.1.1.4 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory Number of subnetwork-unicast packets that received on the interface. This value is displayed in mega-packets(M).Value of 0 through 999,999 are rounded down. | ||||
| CaxsIfStatsInMulticastMegaPkts | 1.3.6.1.4.1.21839.2.2.1.1.4.1.1.5 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory Number of multicast mega-packets that received on the interface. this value is displayed in mega-packets(M).Value of 0 through 999,999 are rounded down. | ||||
| CaxsIfStatsInBroadcastMegaPkts | 1.3.6.1.4.1.21839.2.2.1.1.4.1.1.6 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The number of non-unicast packets delivered to a higher-layer protocol. The value is displayed in mega-packets (M). Value of 0 through 999,999 are rounded down. | ||||
| CaxsIfStatsOutMegaOctets | 1.3.6.1.4.1.21839.2.2.1.1.4.1.1.7 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The total number of octets transmitted out of the interface. The value is displayed in mega-octets(M). Value of 0 through 999,999 are rounded down. | ||||
| CaxsIfStatsOutUcastMegaPkts | 1.3.6.1.4.1.21839.2.2.1.1.4.1.1.8 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The total number of packets that higher-level protocols requested be transmitted to a subnetwork-unicast address.The value is displayed in mega packets(M). Value of 0 through 999,999 are rounded down. | ||||
| CaxsIfStatsOutMulticastMegaPkts | 1.3.6.1.4.1.21839.2.2.1.1.4.1.1.9 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory Number of multicast packets that transmitted on the interface. This value is displayed in mega-packets(M). Value of 0 through 999,999 are rounded down. | ||||
| CaxsIfStatsOutBroadcastMegaPkts | 1.3.6.1.4.1.21839.2.2.1.1.4.1.1.10 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory Number of broadcast packets that transmitted on the interface. This value is displayed in mega-packets(M). Value of 0 through 999,999 are rounded down. | ||||
| CaxsIfStatsHighSpeed | 1.3.6.1.4.1.21839.2.2.1.1.4.1.1.11 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory A circuit speed.This value is displayed in mega-bps[Mbps]. Round off the 1,000,000bps. | ||||
| NaxsQoS | 1.3.6.1.4.1.21839.2.2.1.1.6 | |||
| NaxsEtherTxQoS | 1.3.6.1.4.1.21839.2.2.1.1.6.1 | |||
| TaxsEtherTxQoSStatsTable | 1.3.6.1.4.1.21839.2.2.1.1.6.1.1 | NA | mandatory | |
table · not-accessible · mandatory A collection of QoS statistics kept for a particular Ethernet interface. | ||||
| RaxsEtherTxQoSStatsEntry | 1.3.6.1.4.1.21839.2.2.1.1.6.1.1.1 | NA | mandatory | |
row · not-accessible · mandatory An entry containing QoS statistics for a particular Ethernet interface. | ||||
| CaxsEtherTxQoSStatsIndex | 1.3.6.1.4.1.21839.2.2.1.1.6.1.1.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory Identified by a particular value of this index is same value of ifIndex.Its value ranges between 1 and the value of ifNumber. | ||||
| CaxsEtherTxQoSStatsMaxQnum | 1.3.6.1.4.1.21839.2.2.1.1.6.1.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Max length of queue for an ethernet interface. | ||||
| CaxsEtherTxQoSStatsLimitQlen | 1.3.6.1.4.1.21839.2.2.1.1.6.1.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The limit length of outband queue for an ethernet interface. | ||||
| CaxsEtherTxQoSStatsTotalOutFrames | 1.3.6.1.4.1.21839.2.2.1.1.6.1.1.1.4 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The total number of packets transmitted out of the interface. | ||||
| CaxsEtherTxQoSStatsTotalOutBytesHigh | 1.3.6.1.4.1.21839.2.2.1.1.6.1.1.1.5 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The total number of octets transmitted out of the interface. | ||||
| CaxsEtherTxQoSStatsTotalOutBytesLow | 1.3.6.1.4.1.21839.2.2.1.1.6.1.1.1.6 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The total number of octets transmitted out of the interface. | ||||
| CaxsEtherTxQoSStatsTotalDiscardFrames | 1.3.6.1.4.1.21839.2.2.1.1.6.1.1.1.7 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The number of outbound packets which were chosen to be discarded . | ||||
| TaxsEtherTxQoSStatsQueueTable | 1.3.6.1.4.1.21839.2.2.1.1.6.1.2 | NA | mandatory | |
table · not-accessible · mandatory A collection of priority queue statistics. | ||||
| RaxsEtherTxQoSStatsQueueEntry | 1.3.6.1.4.1.21839.2.2.1.1.6.1.2.1 | NA | mandatory | |
row · not-accessible · mandatory A entry of priority queue statistics. | ||||
| CaxsEtherTxQoSStatsQueueIndex | 1.3.6.1.4.1.21839.2.2.1.1.6.1.2.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory Identified by a particular value of this index is same value of ifIndex.Its value ranges between 1 and the value of ifNumber. | ||||
| CaxsEtherTxQoSStatsQueueQueIndex | 1.3.6.1.4.1.21839.2.2.1.1.6.1.2.1.2 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory An index that uniquely identifies the particular queue.Its value ranges between 1 and the value of axsEtherTxQoSStatsMaxQnum. | ||||
| CaxsEtherTxQoSStatsQueueQlen | 1.3.6.1.4.1.21839.2.2.1.1.6.1.2.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory A length of outbound priority queue for a interface. | ||||
| CaxsEtherTxQoSStatsQueueMaxQlen | 1.3.6.1.4.1.21839.2.2.1.1.6.1.2.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Max length of outband priority queue for a interface since system was up. | ||||
| CaxsEtherTxQoSStatsQueueDiscardFramesClass1 | 1.3.6.1.4.1.21839.2.2.1.1.6.1.2.1.5 | Counter64 | RO | mandatory |
column · Counter64 · read-only · mandatory The number of discard frames in the discard class 1 of output priority queue. | ||||
| CaxsEtherTxQoSStatsQueueDiscardFramesClass2 | 1.3.6.1.4.1.21839.2.2.1.1.6.1.2.1.6 | Counter64 | RO | mandatory |
column · Counter64 · read-only · mandatory The number of discard frames in the discard class 2 of output priority queue. | ||||
| CaxsEtherTxQoSStatsQueueDiscardFramesClass3 | 1.3.6.1.4.1.21839.2.2.1.1.6.1.2.1.7 | Counter64 | RO | mandatory |
column · Counter64 · read-only · mandatory The number of discard frames in the discard class 3 of output priority queue. | ||||
| CaxsEtherTxQoSStatsQueueDiscardFramesClass4 | 1.3.6.1.4.1.21839.2.2.1.1.6.1.2.1.8 | Counter64 | RO | mandatory |
column · Counter64 · read-only · mandatory The number of discard frames in the discard class 4 of output priority queue. | ||||
| NaxsEthShaper | 1.3.6.1.4.1.21839.2.2.1.1.6.4 | |||
| NaxsEthShaperAgQue | 1.3.6.1.4.1.21839.2.2.1.1.6.5 | |||
| NaxsDHCP | 1.3.6.1.4.1.21839.2.2.1.1.10 | |||
| SaxsDHCPAddrValue | 1.3.6.1.4.1.21839.2.2.1.1.10.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of IP addresses which are available within this Router. | ||||
| SaxsDHCPFreeAddrValue | 1.3.6.1.4.1.21839.2.2.1.1.10.2 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of IP addresses which are available within this Router. May be expressed as either an absolute value. | ||||
| NaxsGsrp | 1.3.6.1.4.1.21839.2.2.1.4 | |||
| TaxsGsrpGroupTable | 1.3.6.1.4.1.21839.2.2.1.4.1 | NA | mandatory | |
table · not-accessible · mandatory The table containing GSRP group information. | ||||
| RaxsGsrpGroupEntry | 1.3.6.1.4.1.21839.2.2.1.4.1.1 | NA | mandatory | |
| CaxsGsrpGroupId | 1.3.6.1.4.1.21839.2.2.1.4.1.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory GSRP group identifier. | ||||
| CaxsGsrpGroupRowStatus | 1.3.6.1.4.1.21839.2.2.1.4.1.1.2 | RowStatus | RO | mandatory |
column · RowStatus · read-only · mandatory Valid/Invalid state of this entry. Valid(1) fixed | ||||
| CaxsGsrpMacAddress | 1.3.6.1.4.1.21839.2.2.1.4.1.1.3 | MacAddress | RO | mandatory |
column · MacAddress · read-only · mandatory The Media Access Control Address of this equipment. | ||||
| CaxsGsrpAdvertiseHoldTime | 1.3.6.1.4.1.21839.2.2.1.4.1.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Holding time of the Advertise frame (milli second). | ||||
| CaxsGsrpAdvertiseInterval | 1.3.6.1.4.1.21839.2.2.1.4.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Interval between transmitting the Advertise frame (milli second). | ||||
| CaxsGsrpSelectionPattern | 1.3.6.1.4.1.21839.2.2.1.4.1.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Master/Backup selection pattern. Ports-Priority-MAC(1) Priority-Ports-MAC(2)
| ||||
| CaxsGsrpLayer3Redundancy | 1.3.6.1.4.1.21839.2.2.1.4.1.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The status of layer 3 redundancy-change.
| ||||
| TaxsGsrpVlanGroupTable | 1.3.6.1.4.1.21839.2.2.1.4.2 | NA | mandatory | |
table · not-accessible · mandatory The table containing GSRP VLAN group information. | ||||
| RaxsGsrpVlanGroupEntry | 1.3.6.1.4.1.21839.2.2.1.4.2.1 | NA | mandatory | |
row · not-accessible · mandatory The list of GSRP VLAN group information. | ||||
| CaxsGsrpVlanGroupId | 1.3.6.1.4.1.21839.2.2.1.4.2.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory GSRP VLAN group number(1~8) | ||||
| CaxsGsrpVlanGroupRowStatus | 1.3.6.1.4.1.21839.2.2.1.4.2.1.2 | RowStatus | RO | mandatory |
column · RowStatus · read-only · mandatory Valid/Invalid state of this entry. Valid(1) fixed | ||||
| CaxsGsrpState | 1.3.6.1.4.1.21839.2.2.1.4.2.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The state of GSRP group..
| ||||
| CaxsGsrpPriority | 1.3.6.1.4.1.21839.2.2.1.4.2.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Configured priority. | ||||
| CaxsGsrpActivePorts | 1.3.6.1.4.1.21839.2.2.1.4.2.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of port which is link-up in monitored port. | ||||
| CaxsGsrpTransitionToMasterCounts | 1.3.6.1.4.1.21839.2.2.1.4.2.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of times which shifted to the master state from the backup state. | ||||
| CaxsGsrpTransitionFromMasterCounts | 1.3.6.1.4.1.21839.2.2.1.4.2.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of times which shifted to the backup state from the master state. | ||||
| CaxsGsrpLastTransitionTime | 1.3.6.1.4.1.21839.2.2.1.4.2.1.8 | TimeStamp | RO | mandatory |
column · TimeStamp · read-only · mandatory The last time at which changed in the master state from the backup state or in the backup state from the master state. | ||||
| CaxsGsrpVirtualMacAddress | 1.3.6.1.4.1.21839.2.2.1.4.2.1.9 | MacAddress | RO | mandatory |
column · MacAddress · read-only · mandatory The virtual Media Access Control address of the GSRP VLAN group. If the status of layer 3 redundancy-change is off, return 00 00 00 00 00 00 | ||||
| TaxsGsrpNeighborGroupTable | 1.3.6.1.4.1.21839.2.2.1.4.3 | NA | mandatory | |
table · not-accessible · mandatory The table containing stores the GSRP group information on facing equipment. | ||||
| RaxsGsrpNeighborGroupEntry | 1.3.6.1.4.1.21839.2.2.1.4.3.1 | NA | mandatory | |
row · not-accessible · mandatory The table containing stores the GSRP group information on facing equipment. | ||||
| CaxsGsrpNeighborGroupId | 1.3.6.1.4.1.21839.2.2.1.4.3.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory The GSRP group identifier on the facing equipment. | ||||
| CaxsGsrpNeighborMacAddress | 1.3.6.1.4.1.21839.2.2.1.4.3.1.2 | MacAddress | NA | mandatory |
column · MacAddress · not-accessible · mandatory The Media Access Control Address of the facing equipment. | ||||
| CaxsGsrpNeighborAdvertiseHoldTime | 1.3.6.1.4.1.21839.2.2.1.4.3.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Holding time of the Advertise frame on opposite equipment (milli second). | ||||
| CaxsGsrpNeighborAdvertiseInterval | 1.3.6.1.4.1.21839.2.2.1.4.3.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Interval between transmitting the Advertise frame on the facing equipment (milli second). | ||||
| CaxsGsrpNeighborSelectionPattern | 1.3.6.1.4.1.21839.2.2.1.4.3.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Master/Backup selection pattern on the facing equipment. Ports-Priority-MAC(1) Priority-Ports-MAC(2)
| ||||
| TaxsGsrpNeighborVlanGroupTable | 1.3.6.1.4.1.21839.2.2.1.4.4 | NA | mandatory | |
table · not-accessible · mandatory The table containing the GSRP VLAN group information on facing equipment. | ||||
| RaxsGsrpNeighborVlanGroupEntry | 1.3.6.1.4.1.21839.2.2.1.4.4.1 | NA | mandatory | |
row · not-accessible · mandatory The table containing the GSRP VLAN group information on facing equipment. | ||||
| CaxsGsrpNeighborVlanGroupId | 1.3.6.1.4.1.21839.2.2.1.4.4.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory GSRP VLAN group number on the facing equipment (1~8). | ||||
| CaxsGsrpNeighborState | 1.3.6.1.4.1.21839.2.2.1.4.4.1.2 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory The state of GSRP group on the facing equipment.
| ||||
| CaxsGsrpNeighborPriority | 1.3.6.1.4.1.21839.2.2.1.4.4.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Configured priority on the facing equipment. | ||||
| CaxsGsrpNeighborActivePorts | 1.3.6.1.4.1.21839.2.2.1.4.4.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of port which is link-up in monitored port on the facing equipment. | ||||
| NaxsFdb | 1.3.6.1.4.1.21839.2.2.1.5 | |||
| TaxsFdbCounterTable | 1.3.6.1.4.1.21839.2.2.1.5.1 | NA | mandatory | |
table · not-accessible · mandatory The table of FDB information. | ||||
| RaxsFdbCounterEntry | 1.3.6.1.4.1.21839.2.2.1.5.1.1 | NA | mandatory | |
row · not-accessible · mandatory The entry of FDB information. | ||||
| CaxsFdbCounterNifIndex | 1.3.6.1.4.1.21839.2.2.1.5.1.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory Identified by a particular value of this index is same value of NIF.Its value ranges between 1 and the value of ax1240sNifBoardNumber. | ||||
| CaxsFdbCounterLineIndex | 1.3.6.1.4.1.21839.2.2.1.5.1.1.2 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory Identified by a particular value of this index is same value of Physical Line.Its value ranges between 1 and the value of ax1240sNifLineNumber. | ||||
| CaxsFdbCounterCounts | 1.3.6.1.4.1.21839.2.2.1.5.1.1.3 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The number of FDB entries learned on the port. | ||||
| CaxsFdbCounterType | 1.3.6.1.4.1.21839.2.2.1.5.1.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The type of FDB entries learning.
| ||||
| CaxsFdbCounterLimits | 1.3.6.1.4.1.21839.2.2.1.5.1.1.5 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The maximum number of FDB entries that can be learned on the port. | ||||
| NaxsVlan | 1.3.6.1.4.1.21839.2.2.1.6 | |||
| NaxsVlanBridge | 1.3.6.1.4.1.21839.2.2.1.6.1 | |||
| NaxsVlanBridgeBase | 1.3.6.1.4.1.21839.2.2.1.6.1.1 | |||
| TaxsVBBaseTable | 1.3.6.1.4.1.21839.2.2.1.6.1.1.1 | NA | mandatory | |
table · not-accessible · mandatory An information table of dot1dBase by VLAN units. | ||||
| RaxsVBBaseEntry | 1.3.6.1.4.1.21839.2.2.1.6.1.1.1.1 | NA | mandatory | |
row · not-accessible · mandatory An informatin entry of every VLAN ID of axsVBBaseTable.
| ||||
| CaxsVBBaseIndex | 1.3.6.1.4.1.21839.2.2.1.6.1.1.1.1.1 | VlanIndex | RO | mandatory |
column · VlanIndex · read-only · mandatory VLAN ID. | ||||
| CaxsVBBaseBridgeAddress | 1.3.6.1.4.1.21839.2.2.1.6.1.1.1.1.2 | MacAddress | RO | mandatory |
column · MacAddress · read-only · mandatory MAC address of VLAN. | ||||
| CaxsVBBaseNumPorts | 1.3.6.1.4.1.21839.2.2.1.6.1.1.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of ports set at VLAN. | ||||
| CaxsVBBaseType | 1.3.6.1.4.1.21839.2.2.1.6.1.1.1.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory A bridging type VLAN may perform.
| ||||
| CaxsVBBaseVlanIfIndex | 1.3.6.1.4.1.21839.2.2.1.6.1.1.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Value of ifIndex of interface of VLAN. | ||||
| CaxsVBBaseVlanType | 1.3.6.1.4.1.21839.2.2.1.6.1.1.1.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory VLAN type.
| ||||
| CaxsVBBaseVlanID | 1.3.6.1.4.1.21839.2.2.1.6.1.1.1.1.7 | VlanIdOrZero | RO | mandatory |
column · VlanIdOrZero · read-only · mandatory Value of VID of VLAN-TAG corresponding VLAN. | ||||
| CaxsVBBaseAssociatedPrimaryVlan | 1.3.6.1.4.1.21839.2.2.1.6.1.1.1.1.8 | VlanIdOrZero | RO | mandatory |
column · VlanIdOrZero · read-only · mandatory Returns VLAN ID of Primary VLAN when private VLAN is used and the same VLAN is set at secondary VLAN. | ||||
| CaxsVBBaseIfStatus | 1.3.6.1.4.1.21839.2.2.1.6.1.1.1.1.9 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Status of interface against upper level protocol of VLAN.
| ||||
| CaxsVBBaseLastChange | 1.3.6.1.4.1.21839.2.2.1.6.1.1.1.1.10 | TimeTicks | RO | mandatory |
column · TimeTicks · read-only · mandatory Value of sysUpTime which is set when VLAN topology changes. | ||||
| CaxsVBBasePrivateVlanType | 1.3.6.1.4.1.21839.2.2.1.6.1.1.1.1.11 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory A private VLAN type of VLAN.
| ||||
| TaxsVBBasePortTable | 1.3.6.1.4.1.21839.2.2.1.6.1.1.2 | NA | mandatory | |
table · not-accessible · mandatory An information table of dot1dBasePortTable by VLAN units. | ||||
| RaxsVBBasePortEntry | 1.3.6.1.4.1.21839.2.2.1.6.1.1.2.1 | NA | mandatory | |
row · not-accessible · mandatory A configuration entry of axsVBBaseTable. | ||||
| CaxsVBBasePortIndex | 1.3.6.1.4.1.21839.2.2.1.6.1.1.2.1.1 | VlanIndex | RO | mandatory |
column · VlanIndex · read-only · mandatory VLAN ID. | ||||
| CaxsVBBasePort | 1.3.6.1.4.1.21839.2.2.1.6.1.1.2.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Port number of ports set at VLAN. | ||||
| CaxsVBBasePortIfIndex | 1.3.6.1.4.1.21839.2.2.1.6.1.1.2.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Value of ifIndex corresponding ports set at VLAN. | ||||
| CaxsVBBasePortCircuit | 1.3.6.1.4.1.21839.2.2.1.6.1.1.2.1.4 | OBJECT IDENTIFIER | RO | mandatory |
column · OBJECT IDENTIFIER · read-only · mandatory Identifier which identifieds ports when VLAN ports have the same value as axsVBBasePortIfIndex. | ||||
| CaxsVBBasePortDelayExceededDiscards | 1.3.6.1.4.1.21839.2.2.1.6.1.1.2.1.5 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory Total number of discard frame caused by passing delay occured at VLAN ports. | ||||
| CaxsVBBasePortMtuExceededDiscards | 1.3.6.1.4.1.21839.2.2.1.6.1.1.2.1.6 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory Total number of discard frame caused by data over flow occured at VLAN ports. | ||||
| CaxsVBBasePortState | 1.3.6.1.4.1.21839.2.2.1.6.1.1.2.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory STP port status of port set at VLAN.
| ||||
| CaxsVBBasePortTaggedState | 1.3.6.1.4.1.21839.2.2.1.6.1.1.2.1.8 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Status of VLAN-TAG configuration of ports set at VLAN.
| ||||
| CaxsVBBasePortTranslatedTagID | 1.3.6.1.4.1.21839.2.2.1.6.1.1.2.1.9 | VlanIdOrZero | RO | mandatory |
column · VlanIdOrZero · read-only · mandatory Translated ID of VLAN when TAG translation is set. | ||||
| NaxsVlanBridgeStp | 1.3.6.1.4.1.21839.2.2.1.6.1.2 | |||
| TaxsVBStpTable | 1.3.6.1.4.1.21839.2.2.1.6.1.2.1 | NA | mandatory | |
table · not-accessible · mandatory An information table of dot1dStpTable by VLAN units. | ||||
| RaxsVBStpEntry | 1.3.6.1.4.1.21839.2.2.1.6.1.2.1.1 | NA | mandatory | |
| CaxsVBStpIndex | 1.3.6.1.4.1.21839.2.2.1.6.1.2.1.1.1 | VlanIndex | RO | mandatory |
column · VlanIndex · read-only · mandatory VLAN ID. | ||||
| CaxsVBStpProtocolSpecification | 1.3.6.1.4.1.21839.2.2.1.6.1.2.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory A kind of spanning tree protocol by VLAN units.
| ||||
| CaxsVBStpPriority | 1.3.6.1.4.1.21839.2.2.1.6.1.2.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Priority value of spanning tree by VLAN units. | ||||
| CaxsVBStpTimeSinceTopologyChange | 1.3.6.1.4.1.21839.2.2.1.6.1.2.1.1.4 | TimeTicks | RO | mandatory |
column · TimeTicks · read-only · mandatory Elapsed time since topology change of spanning tree by VLAN units. | ||||
| CaxsVBStpTopChanges | 1.3.6.1.4.1.21839.2.2.1.6.1.2.1.1.5 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The number of times of topology changes of spanning tree by VLAN units. | ||||
| CaxsVBStpDesignatedRoot | 1.3.6.1.4.1.21839.2.2.1.6.1.2.1.1.6 | BridgeId | RO | mandatory |
column · BridgeId · read-only · mandatory Root bridge identifier of spanning tree by VLAN units. | ||||
| CaxsVBStpRootCost | 1.3.6.1.4.1.21839.2.2.1.6.1.2.1.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Root path cost kept by spanning tree by VLAN units. | ||||
| CaxsVBStpRootPort | 1.3.6.1.4.1.21839.2.2.1.6.1.2.1.1.8 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Root port value kept by spanning tree by VLAN units. | ||||
| CaxsVBStpMaxAge | 1.3.6.1.4.1.21839.2.2.1.6.1.2.1.1.9 | Timeout | RO | mandatory |
column · Timeout · read-only · mandatory Maximum aging time kept by spanning tree by VLAN units. | ||||
| CaxsVBStpHelloTime | 1.3.6.1.4.1.21839.2.2.1.6.1.2.1.1.10 | Timeout | RO | mandatory |
column · Timeout · read-only · mandatory Hello time kept by spanning tree by VLAN units. | ||||
| CaxsVBStpHoldTime | 1.3.6.1.4.1.21839.2.2.1.6.1.2.1.1.11 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Hold time kept by spanning tree by VLAN units. | ||||
| CaxsVBStpForwardDelay | 1.3.6.1.4.1.21839.2.2.1.6.1.2.1.1.12 | Timeout | RO | mandatory |
column · Timeout · read-only · mandatory Transfer delay time kept by spanning tree by VLAN units. | ||||
| CaxsVBStpBridgeMaxAge | 1.3.6.1.4.1.21839.2.2.1.6.1.2.1.1.13 | Timeout | RO | mandatory |
column · Timeout · read-only · mandatory Maximum aging time used when spanning tree acts as a root bridge by VLAN units. | ||||
| CaxsVBStpBridgeHelloTime | 1.3.6.1.4.1.21839.2.2.1.6.1.2.1.1.14 | Timeout | RO | mandatory |
column · Timeout · read-only · mandatory Hello time used when spanning tree act as a root bridge by VLAN units. | ||||
| CaxsVBStpBridgeForwardDelay | 1.3.6.1.4.1.21839.2.2.1.6.1.2.1.1.15 | Timeout | RO | mandatory |
column · Timeout · read-only · mandatory Transfer delay time used when spanning tree act as a root bridge by VLAN units. | ||||
| TaxsVBStpPortTable | 1.3.6.1.4.1.21839.2.2.1.6.1.2.2 | NA | mandatory | |
table · not-accessible · mandatory An information table of dot1dStpPortTable by VLAN units. | ||||
| RaxsVBStpPortEntry | 1.3.6.1.4.1.21839.2.2.1.6.1.2.2.1 | NA | mandatory | |
row · not-accessible · mandatory A configuration entry of axsVBStpPortTable. | ||||
| CaxsVBStpPortIndex | 1.3.6.1.4.1.21839.2.2.1.6.1.2.2.1.1 | VlanIndex | RO | mandatory |
column · VlanIndex · read-only · mandatory VLAN ID. | ||||
| CaxsVBStpPort | 1.3.6.1.4.1.21839.2.2.1.6.1.2.2.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Port number corresponding configuration entry. | ||||
| CaxsVBStpPortPriority | 1.3.6.1.4.1.21839.2.2.1.6.1.2.2.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Priority of port by VLAN units. | ||||
| CaxsVBStpPortState | 1.3.6.1.4.1.21839.2.2.1.6.1.2.2.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Present status of port by VLAN units.
| ||||
| CaxsVBStpPortEnable | 1.3.6.1.4.1.21839.2.2.1.6.1.2.2.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Value whether spanning tree is enabled or not at the port by VLAN units.
| ||||
| CaxsVBStpPortPathCost | 1.3.6.1.4.1.21839.2.2.1.6.1.2.2.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Path cost value of the port by VLAN units. | ||||
| CaxsVBStpPortDesignatedRoot | 1.3.6.1.4.1.21839.2.2.1.6.1.2.2.1.7 | BridgeId | RO | mandatory |
column · BridgeId · read-only · mandatory Value of root bridge identifier by VLAN units stored in BPDU from specified bridge. | ||||
| CaxsVBStpPortDesignatedCost | 1.3.6.1.4.1.21839.2.2.1.6.1.2.2.1.8 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Path cost value of specified port connected to the port by VLAN units. | ||||
| CaxsVBStpPortDesignatedBridge | 1.3.6.1.4.1.21839.2.2.1.6.1.2.2.1.9 | BridgeId | RO | mandatory |
column · BridgeId · read-only · mandatory Bridge identifier of bridge which this port regards as specified bridge by VLAN units. | ||||
| CaxsVBStpPortDesignatedPort | 1.3.6.1.4.1.21839.2.2.1.6.1.2.2.1.10 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Port identifier of specified bridge connected to this port by VLAN units. | ||||
| CaxsVBStpPortForwardTransitions | 1.3.6.1.4.1.21839.2.2.1.6.1.2.2.1.11 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The number of times of changes from learning status into forwarding status. | ||||
| NaxsVlanBridgeTp | 1.3.6.1.4.1.21839.2.2.1.6.1.4 | |||
| TaxsVBTpTable | 1.3.6.1.4.1.21839.2.2.1.6.1.4.1 | NA | mandatory | |
table · not-accessible · mandatory A dot1dTp information table by VLAN units. | ||||
| RaxsVBTpEntry | 1.3.6.1.4.1.21839.2.2.1.6.1.4.1.1 | NA | mandatory | |
| CaxsVBTpIndex | 1.3.6.1.4.1.21839.2.2.1.6.1.4.1.1.1 | VlanIndex | RO | mandatory |
column · VlanIndex · read-only · mandatory VLAN ID. | ||||
| CaxsVBTpLearnedEntryDiscards | 1.3.6.1.4.1.21839.2.2.1.6.1.4.1.1.2 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The number of discarded entries because of lack of not-used domain in filtering data base. | ||||
| CaxsVBTpAgingTime | 1.3.6.1.4.1.21839.2.2.1.6.1.4.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Time-out time to aging-out entry of filtering date base which is learned dynamically. | ||||
| TaxsVBTpFdbTable | 1.3.6.1.4.1.21839.2.2.1.6.1.4.2 | NA | mandatory | |
table · not-accessible · mandatory An information of dot1dTpFdbTable by VLAN units. | ||||
| RaxsVBTpFdbEntry | 1.3.6.1.4.1.21839.2.2.1.6.1.4.2.1 | NA | mandatory | |
row · not-accessible · mandatory A configuration entry of axsVBTpFdbTable. | ||||
| CaxsVBTpFdbIndex | 1.3.6.1.4.1.21839.2.2.1.6.1.4.2.1.1 | VlanIndex | RO | mandatory |
column · VlanIndex · read-only · mandatory VLAN ID. | ||||
| CaxsVBTpFdbAddress | 1.3.6.1.4.1.21839.2.2.1.6.1.4.2.1.2 | MacAddress | RO | mandatory |
column · MacAddress · read-only · mandatory Unicast MAC address of filtering data base entry. | ||||
| CaxsVBTpFdbPort | 1.3.6.1.4.1.21839.2.2.1.6.1.4.2.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates that it hasn't learnt port number when port number 0 receives frame having MAC address as source address which axsVBTpFdbAddress indicates. | ||||
| CaxsVBTpFdbStatus | 1.3.6.1.4.1.21839.2.2.1.6.1.4.2.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Status of filtering data base.
| ||||
| TaxsVBTpPortTable | 1.3.6.1.4.1.21839.2.2.1.6.1.4.3 | NA | mandatory | |
table · not-accessible · mandatory An information table of dot1dTpPortTable by VLAN units. | ||||
| RaxsVBTpPortEntry | 1.3.6.1.4.1.21839.2.2.1.6.1.4.3.1 | NA | mandatory | |
row · not-accessible · mandatory An information entry of axsVBTpPortTable of ports.
| ||||
| CaxsVBTpPortIndex | 1.3.6.1.4.1.21839.2.2.1.6.1.4.3.1.1 | VlanIndex | RO | mandatory |
column · VlanIndex · read-only · mandatory VLAN ID. | ||||
| CaxsVBTpPort | 1.3.6.1.4.1.21839.2.2.1.6.1.4.3.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Port number that indicates which port management information in the entry corresponds. | ||||
| CaxsVBTpPortMaxInfo | 1.3.6.1.4.1.21839.2.2.1.6.1.4.3.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Maximum INFO field size of the port by VLAN units. | ||||
| CaxsVBTpPortInFrames | 1.3.6.1.4.1.21839.2.2.1.6.1.4.3.1.4 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The number of reception frame of the port by VLAN units. | ||||
| CaxsVBTpPortOutFrames | 1.3.6.1.4.1.21839.2.2.1.6.1.4.3.1.5 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The number of sending frame of the port by VLAN units. | ||||
| CaxsVBTpPortInDiscards | 1.3.6.1.4.1.21839.2.2.1.6.1.4.3.1.6 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The number of reception frame of the port by VLAN units. | ||||
| NaxsVlanBridgeStatic | 1.3.6.1.4.1.21839.2.2.1.6.1.5 | |||
| TaxsVBStaticTable | 1.3.6.1.4.1.21839.2.2.1.6.1.5.1 | NA | mandatory | |
table · not-accessible · mandatory An information table of dot1dStaticTable by VLAN units. | ||||
| RaxsVBStaticEntry | 1.3.6.1.4.1.21839.2.2.1.6.1.5.1.1 | NA | mandatory | |
row · not-accessible · mandatory A configuration entry of axsVBStaticTable. | ||||
| CaxsVBStaticIndex | 1.3.6.1.4.1.21839.2.2.1.6.1.5.1.1.1 | VlanIndex | RO | mandatory |
column · VlanIndex · read-only · mandatory VLAN ID. | ||||
| CaxsVBStaticAddress | 1.3.6.1.4.1.21839.2.2.1.6.1.5.1.1.2 | MacAddress | RO | mandatory |
column · MacAddress · read-only · mandatory MAC address of eather unicast, group or broadcast. | ||||
| CaxsVBStaticReceivePort | 1.3.6.1.4.1.21839.2.2.1.6.1.5.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Reception port number which is applied the entry. | ||||
| CaxsVBStaticAllowedToGoTo | 1.3.6.1.4.1.21839.2.2.1.6.1.5.1.1.4 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Bit map of port indicating destination port when transfering frame whose destination is MAC address kept by this entry | ||||
| CaxsVBStaticStatus | 1.3.6.1.4.1.21839.2.2.1.6.1.5.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Status of the entry.
| ||||
| SaxsVlanBridgeMaxVlans | 1.3.6.1.4.1.21839.2.2.1.6.1.101 | VlanIndex | RO | mandatory |
scalar · VlanIndex · read-only · mandatory Maximum value of VLAN ID of this device. | ||||
| SaxsVlanBridgeMaxSpans | 1.3.6.1.4.1.21839.2.2.1.6.1.102 | VlanIndex | RO | mandatory |
scalar · VlanIndex · read-only · mandatory Maximum value of VLAN ID of VLAN which may operate spanning tree in this device. | ||||
| NaxsVlanTagTranslation | 1.3.6.1.4.1.21839.2.2.1.6.10 | |||
| TaxsVlanTagTranslationTable | 1.3.6.1.4.1.21839.2.2.1.6.10.1 | NA | mandatory | |
table · not-accessible · mandatory The information table about a Tag conversion function | ||||
| RaxsVlanTagTranslationEntry | 1.3.6.1.4.1.21839.2.2.1.6.10.1.1 | NA | mandatory | |
row · not-accessible · mandatory The entry of the information table about a Tag conversion function | ||||
| CaxsVlanTagTranslationVlanId | 1.3.6.1.4.1.21839.2.2.1.6.10.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory VLAN ID which has set up the Tag conversion function | ||||
| CaxsVlanTagTranslationTranslatedId | 1.3.6.1.4.1.21839.2.2.1.6.10.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Translated ID set up by the Tag conversion function | ||||
| CaxsVlanTagTranslationPorts | 1.3.6.1.4.1.21839.2.2.1.6.10.1.1.3 | PortList | RO | mandatory |
column · PortList · read-only · mandatory The port list which has set up the same Translated ID by the same VLAN by the Tag conversion function | ||||
| NaxsOadp | 1.3.6.1.4.1.21839.2.2.1.7 | |||
| NaxsOadpMIBObjects | 1.3.6.1.4.1.21839.2.2.1.7.1 | |||
| NaxsOadpGlobalInfo | 1.3.6.1.4.1.21839.2.2.1.7.1.1 | |||
| SaxsOadpGlobalActive | 1.3.6.1.4.1.21839.2.2.1.7.1.1.1 | TruthValue | RO | mandatory |
scalar · TruthValue · read-only · mandatory Operation status of OADP function. Status set by enable or disable in Oadp configuration. enable : 1 disable: 2 | ||||
| SaxsOadpGlobalCdpActive | 1.3.6.1.4.1.21839.2.2.1.7.1.1.2 | TruthValue | RO | mandatory |
scalar · TruthValue · read-only · mandatory Operation status of CDP reception function. Status whether cdp-listener is set or not in oadp configuration. cdp-listener : 1 cdp-listener is not set: 2 | ||||
| SaxsOadpGlobalMessageInterval | 1.3.6.1.4.1.21839.2.2.1.7.1.1.3 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Sending interval of OADP frame. The value of interval-time in oadp configuration. | ||||
| SaxsOadpGlobalHoldTime | 1.3.6.1.4.1.21839.2.2.1.7.1.1.4 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Neighbor divice's holding time of OADP frame which this device send. The value of hold-time in oadp configuration. | ||||
| SaxsOadpGlobalCacheLastChange | 1.3.6.1.4.1.21839.2.2.1.7.1.1.5 | TimeTicks | RO | mandatory |
scalar · TimeTicks · read-only · mandatory Value of sysUpTime which is set when axsOadpNeighborTable is updated. | ||||
| SaxsOadpGlobalName | 1.3.6.1.4.1.21839.2.2.1.7.1.1.6 | DisplayString | RO | mandatory |
scalar · DisplayString · read-only · mandatory Device identifier. | ||||
| SaxsOadpGlobalNameType | 1.3.6.1.4.1.21839.2.2.1.7.1.1.7 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Kind of axsOadpGlobalName.
| ||||
| NaxsOadpPortInfo | 1.3.6.1.4.1.21839.2.2.1.7.1.2 | |||
| TaxsOadpPortConfigTable | 1.3.6.1.4.1.21839.2.2.1.7.1.2.1 | NA | mandatory | |
table · not-accessible · mandatory A table of OADP port information. | ||||
| RaxsOadpPortConfigEntry | 1.3.6.1.4.1.21839.2.2.1.7.1.2.1.1 | NA | mandatory | |
| CaxsOadpPortConfigIfIndex | 1.3.6.1.4.1.21839.2.2.1.7.1.2.1.1.1 | InterfaceIndex | RO | mandatory |
column · InterfaceIndex · read-only · mandatory Port identification index. The same value as ifIndex. This is only for physical ports and LA ports which are given ifIndex. | ||||
| CaxsOadpPortConfigActive | 1.3.6.1.4.1.21839.2.2.1.7.1.2.1.1.2 | TruthValue | RO | mandatory |
column · TruthValue · read-only · mandatory Status of specified port. | ||||
| NaxsOadpNeighborInfo | 1.3.6.1.4.1.21839.2.2.1.7.1.3 | |||
| TaxsOadpNeighborTable | 1.3.6.1.4.1.21839.2.2.1.7.1.3.1 | NA | mandatory | |
table · not-accessible · mandatory A table of OADP neighbor nodes. | ||||
| RaxsOadpNeighborEntry | 1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1 | NA | mandatory | |
row · not-accessible · mandatory An entry of OADP neighbor nodes. | ||||
| CaxsOadpIfIndex | 1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.1 | InterfaceIndex | RO | mandatory |
column · InterfaceIndex · read-only · mandatory ifIndex of reception interface. | ||||
| CaxsOadpTagID | 1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Tag ID of IEEE802.1Q which is attached MAC frame. | ||||
| CaxsOadpNeighborIndex | 1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Unique numeric which identifies neighbor nodes | ||||
| CaxsOadpNeighborTagID | 1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Value set at TagID TLV in OADP PDU which is sent from neighbor node. | ||||
| CaxsOadpNeighborVendorType | 1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Protocol type used to find to neighbor nodes.
| ||||
| CaxsOadpNeighborSNMPAgentAddressType | 1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory A kind of agent address to get information by SNMP.
| ||||
| CaxsOadpNeighborSNMPAgentAddress | 1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.7 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory DisplayString formed information of agent address to get information by SNMP. | ||||
| CaxsOadpNeighborDescr | 1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.8 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory String of sysDescr of neighbor node. | ||||
| CaxsOadpNeighborDeviceID | 1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.9 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory Neighbor node's device identifier. | ||||
| CaxsOadpNeighborSlotPort | 1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.10 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory Unique string which identifies neighbor's sending interface. | ||||
| CaxsOadpNeighborIfIndex | 1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.11 | InterfaceIndex | RO | mandatory |
column · InterfaceIndex · read-only · mandatory ifIndex of sending interface of neighbor node. | ||||
| CaxsOadpNeighborIfSpeed | 1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.12 | Gauge32 | RO | mandatory |
column · Gauge32 · read-only · mandatory ifSpeed of sending interface of neighbor node. | ||||
| CaxsOadpNeighborDeviceType | 1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.13 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory Device name of neighbor node. | ||||
| CaxsOadpNeighborService | 1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.14 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Functions neighbor node can offer. | ||||
| CaxsOadpNeighborVTPMgmtDomain | 1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.15 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory VTP Management Domain of sending interface of neighbor node. | ||||
| CaxsOadpNeighborNativeVLAN | 1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.16 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Native VLAN number of sending interface of neighbor node. | ||||
| CaxsOadpNeighborDuplex | 1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.17 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Duplex information of sending interface of neighbor node.
| ||||
| CaxsOadpNeighborApplianceID | 1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.18 | Gauge32 | RO | mandatory |
column · Gauge32 · read-only · mandatory Appliance ID of neighbor node. | ||||
| CaxsOadpNeighborVlanID | 1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.19 | Gauge32 | RO | mandatory |
column · Gauge32 · read-only · mandatory VLAN ID for VoIP of neighbor node. | ||||
| CaxsOadpNeighborPowerConsumption | 1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.20 | Gauge32 | RO | mandatory |
column · Gauge32 · read-only · mandatory Electric power comsumption of neighbor node. | ||||
| CaxsOadpNeighborMTU | 1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.21 | Gauge32 | RO | mandatory |
column · Gauge32 · read-only · mandatory MTU of sending interface of neighbor node. | ||||
| CaxsOadpNeighborSysName | 1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.22 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory sysName of neighbor node. | ||||
| CaxsOadpNeighborSysObjectID | 1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.23 | OBJECT IDENTIFIER | RO | mandatory |
column · OBJECT IDENTIFIER · read-only · mandatory sysObjectID of neighbor node. | ||||
| CaxsOadpNeighborSecondarySNMPAgentAddressType | 1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.24 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory A kind of agent secondary address to get information by SNMP.
| ||||
| CaxsOadpNeighborSecondarySNMPAgentAddress | 1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.25 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory DisplayString formed information of agent secondary address to get information by SNMP. | ||||
| CaxsOadpNeighborPhysLocation | 1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.26 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory sysLocation of neighbor node. | ||||
| CaxsOadpNeighborCacheLastChange | 1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.27 | TimeTicks | RO | mandatory |
column · TimeTicks · read-only · mandatory Value of sysUpTime which is set when axsOadpNeighborEntry about neighbor node is updated. | ||||
| CaxsOadpNeighborIfHighSpeed | 1.3.6.1.4.1.21839.2.2.1.7.1.3.1.1.28 | Gauge32 | RO | mandatory |
column · Gauge32 · read-only · mandatory ifHighSpeed of sending interface of neighbor node. | ||||
| NaxsOadpMIBNotifications | 1.3.6.1.4.1.21839.2.2.1.7.2 | |||
| !axsOadpNeighborCachelastChangeTrap | 1.3.6.1.4.1.21839.2.2.1.7.2.0.1 | |||
notification This trap indicates that information of OADP neighbor nodes is updated. | ||||
| NaxsFlow | 1.3.6.1.4.1.21839.2.2.1.8 | |||
| NaxsAccessFilterStats | 1.3.6.1.4.1.21839.2.2.1.8.9 | |||
| TaxsAccessFilterStatsInTable | 1.3.6.1.4.1.21839.2.2.1.8.9.1 | NA | mandatory | |
table · not-accessible · mandatory Table information on corresponding number of packets to flow detection condition and operation information set by access list. | ||||
| RaxsAccessFilterStatsInEntry | 1.3.6.1.4.1.21839.2.2.1.8.9.1.1 | NA | mandatory | |
row · not-accessible · mandatory Entry concerning corresponding number of packets to flow detection condition and operation information set by access list. | ||||
| CaxsAccessFilterStatsInifIndex | 1.3.6.1.4.1.21839.2.2.1.8.9.1.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory Index value in which entry of this table is identified. | ||||
| CaxsAccessFilterStatsInifIndexType | 1.3.6.1.4.1.21839.2.2.1.8.9.1.1.2 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory Indicates interface type. Physical port number : 1 Interface name : 2 | ||||
| CaxsAccessFilterStatsInListIndex | 1.3.6.1.4.1.21839.2.2.1.8.9.1.1.3 | Unsigned32 | NA | mandatory |
column · Unsigned32 · not-accessible · mandatory Index value of access list that identifies entry of this table. | ||||
| CaxsAccessFilterStatsInSequenceNumber | 1.3.6.1.4.1.21839.2.2.1.8.9.1.1.4 | Unsigned32 | NA | mandatory |
column · Unsigned32 · not-accessible · mandatory Sequence number of flow detection condition and operation information set to access list number or access list name. | ||||
| CaxsAccessFilterStatsInListName | 1.3.6.1.4.1.21839.2.2.1.8.9.1.1.5 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory Access list number or access list name corresponding to index of access list. | ||||
| CaxsAccessFilterStatsInMatchedPackets | 1.3.6.1.4.1.21839.2.2.1.8.9.1.1.6 | Counter64 | RO | mandatory |
column · Counter64 · read-only · mandatory Corresponding number of packets to flow detection condition of access list. | ||||
| TaxsAccessFilterStatsOutTable | 1.3.6.1.4.1.21839.2.2.1.8.9.2 | NA | mandatory | |
table · not-accessible · mandatory Table information on corresponding number of packets to flow detection condition and operation information set by access list of Outbound. | ||||
| RaxsAccessFilterStatsOutEntry | 1.3.6.1.4.1.21839.2.2.1.8.9.2.1 | NA | mandatory | |
row · not-accessible · mandatory Entry concerning corresponding number of packets to flow detection condition and operation information set by access list of Outbound. | ||||
| CaxsAccessFilterStatsOutifIndex | 1.3.6.1.4.1.21839.2.2.1.8.9.2.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory Index value in which entry of this table is identified. | ||||
| CaxsAccessFilterStatsOutifIndexType | 1.3.6.1.4.1.21839.2.2.1.8.9.2.1.2 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory Indicates interface type. Physical port number : 1 Interface name : 2 | ||||
| CaxsAccessFilterStatsOutListIndex | 1.3.6.1.4.1.21839.2.2.1.8.9.2.1.3 | Unsigned32 | NA | mandatory |
column · Unsigned32 · not-accessible · mandatory Index value of access list that identifies entry of this table. | ||||
| CaxsAccessFilterStatsOutSequenceNumber | 1.3.6.1.4.1.21839.2.2.1.8.9.2.1.4 | Unsigned32 | NA | mandatory |
column · Unsigned32 · not-accessible · mandatory Sequence number of flow detection condition and operation information set to access list number or access list name. | ||||
| CaxsAccessFilterStatsOutListName | 1.3.6.1.4.1.21839.2.2.1.8.9.2.1.5 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory Access list number or access list name corresponding to index of access list. | ||||
| CaxsAccessFilterStatsOutMatchedPackets | 1.3.6.1.4.1.21839.2.2.1.8.9.2.1.6 | Counter64 | RO | mandatory |
column · Counter64 · read-only · mandatory Corresponding number of packets to flow detection condition of access list. | ||||
| NaxsQosFlowStats | 1.3.6.1.4.1.21839.2.2.1.8.11 | |||
| TaxsQosFlowStatsInTable | 1.3.6.1.4.1.21839.2.2.1.8.11.1 | NA | mandatory | |
table · not-accessible · mandatory Table information on corresponding number of packets to QoS flow detection condition and operation information set in QoS flow list. | ||||
| RaxsQosFlowStatsInEntry | 1.3.6.1.4.1.21839.2.2.1.8.11.1.1 | NA | mandatory | |
row · not-accessible · mandatory Entry concerning corresponding number of packets to QoS flow detection condition and operation information set in QoS Flower shop. | ||||
| CaxsQosFlowStatsInifIndex | 1.3.6.1.4.1.21839.2.2.1.8.11.1.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory Index value in which entry of this table is identified. | ||||
| CaxsQosFlowStatsInifIndexType | 1.3.6.1.4.1.21839.2.2.1.8.11.1.1.2 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory Indicates interface type. Physical port number : 1 Interface name : 2 | ||||
| CaxsQosFlowStatsInListIndex | 1.3.6.1.4.1.21839.2.2.1.8.11.1.1.3 | Unsigned32 | NA | mandatory |
column · Unsigned32 · not-accessible · mandatory Index value of QoS Flow list where entry of this table is identified. | ||||
| CaxsQosFlowStatsInSequenceNumber | 1.3.6.1.4.1.21839.2.2.1.8.11.1.1.4 | Unsigned32 | NA | mandatory |
column · Unsigned32 · not-accessible · mandatory Sequence number of flow detection condition and operation information set to QoS flow list name. | ||||
| CaxsQosFlowStatsInListName | 1.3.6.1.4.1.21839.2.2.1.8.11.1.1.5 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory QoS flow list name corresponding to index of QoS flow list. | ||||
| CaxsQosFlowStatsInMatchedPackets | 1.3.6.1.4.1.21839.2.2.1.8.11.1.1.6 | Counter64 | RO | mandatory |
column · Counter64 · read-only · mandatory Corresponding number of packets to flow detection condition of QoS flow list. | ||||
| CaxsQosFlowStatsInMatchedPacketsMinUnder | 1.3.6.1.4.1.21839.2.2.1.8.11.1.1.7 | Counter64 | RO | mandatory |
column · Counter64 · read-only · mandatory Number of packets in which it agrees to flow detection condition of QoS flow list and the lowest band watch is observed. | ||||
| CaxsQosFlowStatsInMatchedPacketsMinOver | 1.3.6.1.4.1.21839.2.2.1.8.11.1.1.8 | Counter64 | RO | mandatory |
column · Counter64 · read-only · mandatory Number of packets in which it agrees to flow detection condition of QoS flow list and it violates the lowest band watch. | ||||
| CaxsQosFlowStatsInMatchedPacketsMaxUnder | 1.3.6.1.4.1.21839.2.2.1.8.11.1.1.9 | Counter64 | RO | mandatory |
column · Counter64 · read-only · mandatory Number of packets in which it agrees to flow detection condition of QoS flow list and the maximum band control is observed. | ||||
| CaxsQosFlowStatsInMatchedPacketsMaxOver | 1.3.6.1.4.1.21839.2.2.1.8.11.1.1.10 | Counter64 | RO | mandatory |
column · Counter64 · read-only · mandatory Number of packets in which it agrees to flow detection condition of QoS flow list and it violates the maximum band control. | ||||
| NaxsL2ld | 1.3.6.1.4.1.21839.2.2.1.10 | |||
| NaxsL2ldGlobalInfo | 1.3.6.1.4.1.21839.2.2.1.10.1 | |||
| SaxsL2ldVersion | 1.3.6.1.4.1.21839.2.2.1.10.1.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The version of L2 loop detection. | ||||
| SaxsL2ldLoopDetectionId | 1.3.6.1.4.1.21839.2.2.1.10.1.2 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory L2 loop detection ID. | ||||
| SaxsL2ldIntervalTime | 1.3.6.1.4.1.21839.2.2.1.10.1.3 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Sending interval of L2 loop detection frame. | ||||
| SaxsL2ldOutputRate | 1.3.6.1.4.1.21839.2.2.1.10.1.4 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Sending rate of L2 loop detection frame. | ||||
| SaxsL2ldThreshold | 1.3.6.1.4.1.21839.2.2.1.10.1.5 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Detection counts until port is put into state of inactive. | ||||
| SaxsL2ldHoldTime | 1.3.6.1.4.1.21839.2.2.1.10.1.6 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Hold time of detection counts. | ||||
| SaxsL2ldAutoRestoreTime | 1.3.6.1.4.1.21839.2.2.1.10.1.7 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Time until port put into state of inactive is put into state of active by automatic operation. | ||||
| SaxsL2ldConfigurationVlanPortCounts | 1.3.6.1.4.1.21839.2.2.1.10.1.8 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of VLAN ports set to send L2 loop detection frame. | ||||
| SaxsL2ldCapacityVlanPortCounts | 1.3.6.1.4.1.21839.2.2.1.10.1.9 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of VLAN ports that can be sent by L2 loop detection frame sending rate. | ||||
| TaxsL2ldPortTable | 1.3.6.1.4.1.21839.2.2.1.10.2 | NA | mandatory | |
table · not-accessible · mandatory The table containing port information on L2 loop detection. | ||||
| RaxsL2ldPortEntry | 1.3.6.1.4.1.21839.2.2.1.10.2.1 | NA | mandatory | |
row · not-accessible · mandatory The entry of port information on L2 loop detection. | ||||
| CaxsL2ldPortIndex | 1.3.6.1.4.1.21839.2.2.1.10.2.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Index of L2 loop detection port. | ||||
| CaxsL2ldPortIfIndex | 1.3.6.1.4.1.21839.2.2.1.10.2.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory ifIndex of L2 loop detection port. | ||||
| CaxsL2ldPortStatus | 1.3.6.1.4.1.21839.2.2.1.10.2.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory State of L2 loop detection port.
| ||||
| CaxsL2ldPortType | 1.3.6.1.4.1.21839.2.2.1.10.2.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Type of L2 loop detection port.
| ||||
| CaxsL2ldPortDetectCount | 1.3.6.1.4.1.21839.2.2.1.10.2.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of L2 loop detection. The number in which L2 loop detection frame is received in hold time. | ||||
| CaxsL2ldPortAutoRestoringTimer | 1.3.6.1.4.1.21839.2.2.1.10.2.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Time until restoring it automatically. The value is 0 when port is active. | ||||
| CaxsL2ldPortSourcePortIfindex | 1.3.6.1.4.1.21839.2.2.1.10.2.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory ifIndex of port transmitted when L2 loop detection frame was received at the end. | ||||
| CaxsL2ldPortDestinationPortIfindex | 1.3.6.1.4.1.21839.2.2.1.10.2.1.8 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory ifIndex of port where L2 loop detection frame was received at the end. | ||||
| CaxsL2ldPortSourceVlan | 1.3.6.1.4.1.21839.2.2.1.10.2.1.9 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory VLAN ID when transmitting when L2 loop detection frame was received at the end. | ||||
| CaxsL2ldPortHCInFrames | 1.3.6.1.4.1.21839.2.2.1.10.2.1.10 | Counter64 | RO | mandatory |
column · Counter64 · read-only · mandatory Number of receptions of L2 loop detection frames. | ||||
| CaxsL2ldPortHCOutFrames | 1.3.6.1.4.1.21839.2.2.1.10.2.1.11 | Counter64 | RO | mandatory |
column · Counter64 · read-only · mandatory Number of transmissions of L2 loop detection frames. | ||||
| CaxsL2ldPortHCInDiscards | 1.3.6.1.4.1.21839.2.2.1.10.2.1.12 | Counter64 | RO | mandatory |
column · Counter64 · read-only · mandatory Number of receptions of L2 loop detection discard frames. | ||||
| CaxsL2ldPortInactiveCount | 1.3.6.1.4.1.21839.2.2.1.10.2.1.13 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of put into state of inactive. | ||||
| CaxsL2ldPortLastInactiveTime | 1.3.6.1.4.1.21839.2.2.1.10.2.1.14 | TimeStamp | RO | mandatory |
column · TimeStamp · read-only · mandatory Time put into state of inactive at the end. | ||||
| CaxsL2ldPortLastInFramesTime | 1.3.6.1.4.1.21839.2.2.1.10.2.1.15 | TimeStamp | RO | mandatory |
column · TimeStamp · read-only · mandatory Time to have received L2 loop detection frame at the end. | ||||
| NaxsOspf | 1.3.6.1.4.1.21839.2.2.1.14 | |||
| TaxsOspfGeneralTable | 1.3.6.1.4.1.21839.2.2.1.14.1 | NA | mandatory | |
table · not-accessible · mandatory The table of OSPF information. | ||||
| RaxsOspfGeneralEntry | 1.3.6.1.4.1.21839.2.2.1.14.1.1 | NA | mandatory | |
| CaxsOspfGeneralDomainNumber | 1.3.6.1.4.1.21839.2.2.1.14.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Domain number in the Autonomous System. | ||||
| CaxsOspfRouterId | 1.3.6.1.4.1.21839.2.2.1.14.1.1.2 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory A integer uniquely identifying the router in the Autonomous System. | ||||
| CaxsOspfAdminStat | 1.3.6.1.4.1.21839.2.2.1.14.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The administrative status of OSPF in the router.
| ||||
| CaxsOspfVersionNumber | 1.3.6.1.4.1.21839.2.2.1.14.1.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The current version number of the OSPF protocol is 2. | ||||
| CaxsOspfAreaBdrRtrStatus | 1.3.6.1.4.1.21839.2.2.1.14.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory A flag to note whether this router is an area border router.
| ||||
| CaxsOspfASBdrRtrStatus | 1.3.6.1.4.1.21839.2.2.1.14.1.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory A flag to note whether this router is configured as an Autonomous System border router.
| ||||
| CaxsOspfExternLsaCount | 1.3.6.1.4.1.21839.2.2.1.14.1.1.7 | Gauge32 | RO | mandatory |
column · Gauge32 · read-only · mandatory The number of external (LS type 5) link-state advertisements in the link-state database. | ||||
| CaxsOspfExternLsaCksumSum | 1.3.6.1.4.1.21839.2.2.1.14.1.1.8 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The 32-bit unsigned sum of the LS checksums of the external link-state advertisements contained in the link-state database. | ||||
| CaxsOspfTOSSupport | 1.3.6.1.4.1.21839.2.2.1.14.1.1.9 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The router's support for type-of-service routing. This value of false(2).
| ||||
| CaxsOspfOriginateNewLsas | 1.3.6.1.4.1.21839.2.2.1.14.1.1.10 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The number of new link-state advertisements that have been originated. | ||||
| CaxsOspfRxNewLsas | 1.3.6.1.4.1.21839.2.2.1.14.1.1.11 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The number of link-state advertisements received determined to be new instantiations. | ||||
| CaxsOspfExtLsdbLimit | 1.3.6.1.4.1.21839.2.2.1.14.1.1.12 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The maximum number of non-default AS-external-LSAs entries that can be stored in the link-state database. If the value is -1, then there is no limit. This value is -1 | ||||
| CaxsOspfMulticastExtensions | 1.3.6.1.4.1.21839.2.2.1.14.1.1.13 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory A Bit Mask indicating whether the router is forwarding IP multicast (Class D) datagrams based on the algorithms defined in the Multicast Extensions to OSPF. | ||||
| TaxsOspfAreaTable | 1.3.6.1.4.1.21839.2.2.1.14.2 | NA | mandatory | |
table · not-accessible · mandatory The router's support for demand routing. | ||||
| RaxsOspfAreaEntry | 1.3.6.1.4.1.21839.2.2.1.14.2.1 | NA | mandatory | |
row · not-accessible · mandatory This entry contain ospf area information. | ||||
| CaxsOspfAreaDomainNumber | 1.3.6.1.4.1.21839.2.2.1.14.2.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory An uniquely identifying number of domain. | ||||
| CaxsOspfAreaId | 1.3.6.1.4.1.21839.2.2.1.14.2.1.2 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory A 32-bit integer uniquely identifying an area. | ||||
| CaxsOspfAuthType | 1.3.6.1.4.1.21839.2.2.1.14.2.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The authentication type specified for an area. | ||||
| CaxsOspfImportAsExtern | 1.3.6.1.4.1.21839.2.2.1.14.2.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The area's support for importing AS external link- state advertisements.
| ||||
| CaxsOspfSpfRuns | 1.3.6.1.4.1.21839.2.2.1.14.2.1.5 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The number of times that the intra-area route table has been calculated using this area's link-state database. | ||||
| CaxsOspfAreaBdrRtrCount | 1.3.6.1.4.1.21839.2.2.1.14.2.1.6 | Gauge32 | RO | mandatory |
column · Gauge32 · read-only · mandatory The total number of area border routers reachable within this area. | ||||
| CaxsOspfAsBdrRtrCount | 1.3.6.1.4.1.21839.2.2.1.14.2.1.7 | Gauge32 | RO | mandatory |
column · Gauge32 · read-only · mandatory The total number of AS area border routers reachable within this area. | ||||
| CaxsOspfAreaLsaCount | 1.3.6.1.4.1.21839.2.2.1.14.2.1.8 | Gauge32 | RO | mandatory |
column · Gauge32 · read-only · mandatory The total number of LSA(link-state advertisements) in this area. Excluding AS External LSA's | ||||
| CaxsOspfAreaLsaCksumSum | 1.3.6.1.4.1.21839.2.2.1.14.2.1.9 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The sum of LSA's LS checksums contained in this area's link-state database. | ||||
| CaxsOspfAreaSummary | 1.3.6.1.4.1.21839.2.2.1.14.2.1.10 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory he variable axsOspfAreaSummary controls the import of summary LSAs into stub areas. Value is only sendAreaSummary(2).
| ||||
| CaxsOspfAreaStatus | 1.3.6.1.4.1.21839.2.2.1.14.2.1.11 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This variable displays the status of the entry. Value is only valid(1).
| ||||
| TaxsOspfStubAreaTable | 1.3.6.1.4.1.21839.2.2.1.14.3 | NA | mandatory | |
table · not-accessible · mandatory The set of metrics that will be advertised by a default Area Border Router into a stub area. | ||||
| RaxsOspfStubAreaEntry | 1.3.6.1.4.1.21839.2.2.1.14.3.1 | NA | mandatory | |
row · not-accessible · mandatory The metric for a given Type of Service that will be advertised by a default Area Border Router into a stub area. | ||||
| CaxsOspfStubDomainNumber | 1.3.6.1.4.1.21839.2.2.1.14.3.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The domain identifier for the Stub Area. | ||||
| CaxsOspfStubAreaId | 1.3.6.1.4.1.21839.2.2.1.14.3.1.2 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The identifier for the Stub Area. | ||||
| CaxsOspfStubTOS | 1.3.6.1.4.1.21839.2.2.1.14.3.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The Type of Service associated with the metric. Value is only 0. | ||||
| CaxsOspfStubMetric | 1.3.6.1.4.1.21839.2.2.1.14.3.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The metric value applied at the indicated type of service. | ||||
| CaxsOspfStubStatus | 1.3.6.1.4.1.21839.2.2.1.14.3.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This variable displays the status of the entry. This value is only valid(1).
| ||||
| CaxsOspfStubMetricType | 1.3.6.1.4.1.21839.2.2.1.14.3.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory his variable displays the type of metric advertised as a default route.
| ||||
| TaxsOspfLsdbTable | 1.3.6.1.4.1.21839.2.2.1.14.4 | NA | mandatory | |
table · not-accessible · mandatory The OSPF Process's Link State Database. | ||||
| RaxsOspfLsdbEntry | 1.3.6.1.4.1.21839.2.2.1.14.4.1 | NA | mandatory | |
row · not-accessible · mandatory A single Link State Advertisement. | ||||
| CaxsOspfLsdbDomainNumber | 1.3.6.1.4.1.21839.2.2.1.14.4.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The identifier of the domain from which the LSA was received. | ||||
| CaxsOspfLsdbAreaId | 1.3.6.1.4.1.21839.2.2.1.14.4.1.2 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The 32 bit identifier of the Area from which the LSA was received. | ||||
| CaxsOspfLsdbType | 1.3.6.1.4.1.21839.2.2.1.14.4.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The type of the link state advertisement.
| ||||
| CaxsOspfLsdbLsid | 1.3.6.1.4.1.21839.2.2.1.14.4.1.4 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The Link State ID . It identifies the piece of the routing domain that is being described by the advertisement. | ||||
| CaxsOspfLsdbRouterId | 1.3.6.1.4.1.21839.2.2.1.14.4.1.5 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The number that uniquely identifies the originating router in the Autonomous System. | ||||
| CaxsOspfLsdbSequence | 1.3.6.1.4.1.21839.2.2.1.14.4.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The sequence number field is a signed 32-bit integer. | ||||
| CaxsOspfLsdbAge | 1.3.6.1.4.1.21839.2.2.1.14.4.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This the age of the link state adver- tisement in seconds. | ||||
| CaxsOspfLsdbChecksum | 1.3.6.1.4.1.21839.2.2.1.14.4.1.8 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This field is the checksum of the complete contents of the advertisement, excepting the age field. | ||||
| CaxsOspfLsdbAdvertisement | 1.3.6.1.4.1.21839.2.2.1.14.4.1.9 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory The entire Link State Advertisement, including its header. | ||||
| TaxsOspfAreaRangeTable | 1.3.6.1.4.1.21839.2.2.1.14.5 | NA | mandatory | |
table · not-accessible · mandatory A range if IP addresses specified by an IP address/IP network mask pair. | ||||
| RaxsOspfAreaRangeEntry | 1.3.6.1.4.1.21839.2.2.1.14.5.1 | NA | mandatory | |
row · not-accessible · mandatory A range if IP addresses specified by an IP address/IP network mask pair. | ||||
| CaxsOspfAreaRangeDomainNumber | 1.3.6.1.4.1.21839.2.2.1.14.5.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Domain number of the Area. | ||||
| CaxsOspfAreaRangeAreaId | 1.3.6.1.4.1.21839.2.2.1.14.5.1.2 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The Area the Address Range is to be found within. | ||||
| CaxsOspfAreaRangeNet | 1.3.6.1.4.1.21839.2.2.1.14.5.1.3 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The IP Address of the Net or Subnet indicated by the range. | ||||
| CaxsOspfAreaRangeMask | 1.3.6.1.4.1.21839.2.2.1.14.5.1.4 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The Subnet Mask that pertains to the Net or Subnet. | ||||
| CaxsOspfAreaRangeStatus | 1.3.6.1.4.1.21839.2.2.1.14.5.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This variable displays the status of the entry. This value is only valid(1).
| ||||
| CaxsOspfAreaRangeEffect | 1.3.6.1.4.1.21839.2.2.1.14.5.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Subnets subsumed by ranges either trigger the advertisement of the indicated summary (adver- tiseMatching), or result in the subnet's not being advertised at all outside the area.
| ||||
| TaxsOspfIfTable | 1.3.6.1.4.1.21839.2.2.1.14.7 | NA | mandatory | |
table · not-accessible · mandatory The OSPF Interface Table describes the interfaces from the viewpoint of OSPF. | ||||
| RaxsOspfIfEntry | 1.3.6.1.4.1.21839.2.2.1.14.7.1 | NA | mandatory | |
row · not-accessible · mandatory The OSPF Interface Entry describes one interface from the viewpoint of OSPF. | ||||
| CaxsOspfIfDomainNumber | 1.3.6.1.4.1.21839.2.2.1.14.7.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The domain number of this OSPF interface. | ||||
| CaxsOspfIfIpAddress | 1.3.6.1.4.1.21839.2.2.1.14.7.1.2 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The IP address of this OSPF interface. | ||||
| CaxsOspfAddressLessIf | 1.3.6.1.4.1.21839.2.2.1.14.7.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corresponding value of ifIndex for interfaces having no IP Address. | ||||
| CaxsOspfIfAreaId | 1.3.6.1.4.1.21839.2.2.1.14.7.1.4 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory A integer uniquely identifying the area to which the interface connects. | ||||
| CaxsOspfIfType | 1.3.6.1.4.1.21839.2.2.1.14.7.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The OSPF interface type.
| ||||
| CaxsOspfIfAdminStat | 1.3.6.1.4.1.21839.2.2.1.14.7.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The OSPF interface's administrative status.
| ||||
| CaxsOspfIfRtrPriority | 1.3.6.1.4.1.21839.2.2.1.14.7.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The priority of this interface. | ||||
| CaxsOspfIfTransitDelay | 1.3.6.1.4.1.21839.2.2.1.14.7.1.8 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The estimated number of seconds it takes to transmit a link state update packet over this interface. | ||||
| CaxsOspfIfRetransInterval | 1.3.6.1.4.1.21839.2.2.1.14.7.1.9 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. | ||||
| CaxsOspfIfHelloInterval | 1.3.6.1.4.1.21839.2.2.1.14.7.1.10 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The length of time, in seconds, between the Hello packets that the router sends on the interface. | ||||
| CaxsOspfIfRtrDeadInterval | 1.3.6.1.4.1.21839.2.2.1.14.7.1.11 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. | ||||
| CaxsOspfIfPollInterval | 1.3.6.1.4.1.21839.2.2.1.14.7.1.12 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor. | ||||
| CaxsOspfIfState | 1.3.6.1.4.1.21839.2.2.1.14.7.1.13 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The OSPF Interface State.
| ||||
| CaxsOspfIfDesignatedRouter | 1.3.6.1.4.1.21839.2.2.1.14.7.1.14 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The IP Address of the Designated Router. | ||||
| CaxsOspfIfBackupDesignatedRouter | 1.3.6.1.4.1.21839.2.2.1.14.7.1.15 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The IP Address of the Backup Designated Router. | ||||
| CaxsOspfIfEvents | 1.3.6.1.4.1.21839.2.2.1.14.7.1.16 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The number of times this OSPF interface has changed its state, or an error has occurred. | ||||
| CaxsOspfIfAuthKey | 1.3.6.1.4.1.21839.2.2.1.14.7.1.17 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory The Authentication Key. | ||||
| CaxsOspfIfStatus | 1.3.6.1.4.1.21839.2.2.1.14.7.1.18 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This variable displays the status of the entry. this value is only valid(1).
| ||||
| CaxsOspfIfMulticastForwarding | 1.3.6.1.4.1.21839.2.2.1.14.7.1.19 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link unicasts.
| ||||
| TaxsOspfIfMetricTable | 1.3.6.1.4.1.21839.2.2.1.14.8 | NA | mandatory | |
table · not-accessible · mandatory The TOS metrics for a non-virtual interface identified by the interface index. | ||||
| RaxsOspfIfMetricEntry | 1.3.6.1.4.1.21839.2.2.1.14.8.1 | NA | mandatory | |
row · not-accessible · mandatory A particular TOS metric for a non-virtual interface identified by the interface index. | ||||
| CaxsOspfIfMetricDomainNumber | 1.3.6.1.4.1.21839.2.2.1.14.8.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The domain number of this OSPF interface. | ||||
| CaxsOspfIfMetricIpAddress | 1.3.6.1.4.1.21839.2.2.1.14.8.1.2 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The IP address of this OSPF interface. | ||||
| CaxsOspfIfMetricAddressLessIf | 1.3.6.1.4.1.21839.2.2.1.14.8.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the value of ifIndex for in- terfaces having no IP Address. | ||||
| CaxsOspfIfMetricTOS | 1.3.6.1.4.1.21839.2.2.1.14.8.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The type of service metric being referenced. this value is only 0. | ||||
| CaxsOspfIfMetricValue | 1.3.6.1.4.1.21839.2.2.1.14.8.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The metric of using this type of service on this interface. | ||||
| CaxsOspfIfMetricStatus | 1.3.6.1.4.1.21839.2.2.1.14.8.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This variable displays the status of the entry. This entry status is only valid(1).
| ||||
| TaxsOspfVirtIfTable | 1.3.6.1.4.1.21839.2.2.1.14.9 | NA | mandatory | |
table · not-accessible · mandatory Information about this router's virtual interfaces. | ||||
| RaxsOspfVirtIfEntry | 1.3.6.1.4.1.21839.2.2.1.14.9.1 | NA | mandatory | |
row · not-accessible · mandatory Information about a single Virtual Interface. | ||||
| CaxsOspfVirtIfDomainNumber | 1.3.6.1.4.1.21839.2.2.1.14.9.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The domain number for this Virtual Interface | ||||
| CaxsOspfVirtIfAreaId | 1.3.6.1.4.1.21839.2.2.1.14.9.1.2 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The Transit Area that the Virtual Link traverses. | ||||
| CaxsOspfVirtIfNeighbor | 1.3.6.1.4.1.21839.2.2.1.14.9.1.3 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The Router ID of the Virtual Neighbor. | ||||
| CaxsOspfVirtIfTransitDelay | 1.3.6.1.4.1.21839.2.2.1.14.9.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The estimated number of seconds it takes to transmit a link- state update packet over this interface. | ||||
| CaxsOspfVirtIfRetransInterval | 1.3.6.1.4.1.21839.2.2.1.14.9.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of seconds between link-state advertisement retransmissions, for adjacencies belonging to this interface. | ||||
| CaxsOspfVirtIfHelloInterval | 1.3.6.1.4.1.21839.2.2.1.14.9.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The length of time, in seconds, between the Hello packets that the router sends on the in- terface. | ||||
| CaxsOspfVirtIfRtrDeadInterval | 1.3.6.1.4.1.21839.2.2.1.14.9.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of seconds that a router's Hello packets have not been seen before it's neighbors declare the router down. | ||||
| CaxsOspfVirtIfState | 1.3.6.1.4.1.21839.2.2.1.14.9.1.8 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory OSPF virtual interface states.
| ||||
| CaxsOspfVirtIfEvents | 1.3.6.1.4.1.21839.2.2.1.14.9.1.9 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The number of state changes or error events on this Virtual Link | ||||
| CaxsOspfVirtIfAuthKey | 1.3.6.1.4.1.21839.2.2.1.14.9.1.10 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Authentication key of this interface. | ||||
| CaxsOspfVirtIfStatus | 1.3.6.1.4.1.21839.2.2.1.14.9.1.11 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This variable displays the status of the entry. This entry is only valid(1).
| ||||
| TaxsOspfNbrTable | 1.3.6.1.4.1.21839.2.2.1.14.10 | NA | mandatory | |
table · not-accessible · mandatory A table of non-virtual neighbor information. | ||||
| RaxsOspfNbrEntry | 1.3.6.1.4.1.21839.2.2.1.14.10.1 | NA | mandatory | |
row · not-accessible · mandatory The information regarding a single neighbor. | ||||
| CaxsOspfNbrDomainNumber | 1.3.6.1.4.1.21839.2.2.1.14.10.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory OSPF domain number of this neighbor. | ||||
| CaxsOspfNbrIpAddr | 1.3.6.1.4.1.21839.2.2.1.14.10.1.2 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The IP address this neighbor is using in its IP Source Address. | ||||
| CaxsOspfNbrAddressLessIndex | 1.3.6.1.4.1.21839.2.2.1.14.10.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory On an interface having an IP Address, zero. On addressless interfaces, the corresponding value of ifIndex in the Internet Standard MIB. | ||||
| CaxsOspfNbrRtrId | 1.3.6.1.4.1.21839.2.2.1.14.10.1.4 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The integer uniquely identifying the neighboring router in the Autonomous System. | ||||
| CaxsOspfNbrOptions | 1.3.6.1.4.1.21839.2.2.1.14.10.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory A Bit Mask corresponding to the neighbor's op- tions field. Bit 0, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 1, if set, indicates that the associated area accepts and operates on external informa- tion; if zero, it is a stub area. Bit 2, if set, indicates that the system is ca- pable of routing IP Multicast datagrams; i.e., that it implements the Multicast Extensions to OSPF. Bit 3, if set, indicates that the associated area is an NSSA. These areas are capable of carrying type 7 external advertisements, which are translated into type 5 external advertise- ments at NSSA borders. | ||||
| CaxsOspfNbrPriority | 1.3.6.1.4.1.21839.2.2.1.14.10.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The priority of this neighbor. | ||||
| CaxsOspfNbrState | 1.3.6.1.4.1.21839.2.2.1.14.10.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The State of the relationship with this Neighbor.
| ||||
| CaxsOspfNbrEvents | 1.3.6.1.4.1.21839.2.2.1.14.10.1.8 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The number of times this neighbor relationship has changed state, or an error has occurred. | ||||
| CaxsOspfNbrLsRetransQLen | 1.3.6.1.4.1.21839.2.2.1.14.10.1.9 | Gauge32 | RO | mandatory |
column · Gauge32 · read-only · mandatory The current length of the retransmission queue. | ||||
| CaxsOspfNbmaNbrStatus | 1.3.6.1.4.1.21839.2.2.1.14.10.1.10 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This variable displays the status of the entry. This entry value is only valid(1). And enable to response this entry when axsOspfIfType is nbma.
| ||||
| CaxsOspfNbmaNbrPermanence | 1.3.6.1.4.1.21839.2.2.1.14.10.1.11 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This variable displays the status of the entry.
| ||||
| TaxsOspfVirtNbrTable | 1.3.6.1.4.1.21839.2.2.1.14.11 | NA | mandatory | |
table · not-accessible · mandatory A table of virtual neighbor information. | ||||
| RaxsOspfVirtNbrEntry | 1.3.6.1.4.1.21839.2.2.1.14.11.1 | NA | mandatory | |
row · not-accessible · mandatory Virtual neighbor information. | ||||
| CaxsOspfVirtNbrDomainNumber | 1.3.6.1.4.1.21839.2.2.1.14.11.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The domain number. | ||||
| CaxsOspfVirtNbrArea | 1.3.6.1.4.1.21839.2.2.1.14.11.1.2 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The Transit Area Identifier. | ||||
| CaxsOspfVirtNbrRtrId | 1.3.6.1.4.1.21839.2.2.1.14.11.1.3 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory A integer uniquely identifying the neighboring router in the Autonomous System. | ||||
| CaxsOspfVirtNbrIpAddr | 1.3.6.1.4.1.21839.2.2.1.14.11.1.4 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The IP address this Virtual Neighbor is using. | ||||
| CaxsOspfVirtNbrOptions | 1.3.6.1.4.1.21839.2.2.1.14.11.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory A Bit Mask corresponding to the neighbor's options field. Bit 1, if set, indicates that the system will operate on Type of Service metrics other than TOS 0. If zero, the neighbor will ignore all metrics except the TOS 0 metric. Bit 2, if set, indicates that the system is Network Multicast capable; ie, that it implements OSPF Multicast Routing. | ||||
| CaxsOspfVirtNbrState | 1.3.6.1.4.1.21839.2.2.1.14.11.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The state of the Virtual Neighbor Relationship.
| ||||
| CaxsOspfVirtNbrEvents | 1.3.6.1.4.1.21839.2.2.1.14.11.1.7 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The number of times this virtual link has changed its state, or an error has occurred. | ||||
| CaxsOspfVirtNbrLsRetransQLen | 1.3.6.1.4.1.21839.2.2.1.14.11.1.8 | Gauge32 | RO | mandatory |
column · Gauge32 · read-only · mandatory The current length of the retransmission queue. | ||||
| TaxsOspfExtLsdbTable | 1.3.6.1.4.1.21839.2.2.1.14.12 | NA | mandatory | |
table · not-accessible · mandatory The OSPF Process's Links State Database. | ||||
| RaxsOspfExtLsdbEntry | 1.3.6.1.4.1.21839.2.2.1.14.12.1 | NA | mandatory | |
row · not-accessible · mandatory A single Link State Advertisement. | ||||
| CaxsOspfExtLsdbDomainNumber | 1.3.6.1.4.1.21839.2.2.1.14.12.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory OSPF domain number. | ||||
| CaxsOspfExtLsdbType | 1.3.6.1.4.1.21839.2.2.1.14.12.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The type of the link state advertisement.
| ||||
| CaxsOspfExtLsdbLsid | 1.3.6.1.4.1.21839.2.2.1.14.12.1.3 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being described by the advertisement. | ||||
| CaxsOspfExtLsdbRouterId | 1.3.6.1.4.1.21839.2.2.1.14.12.1.4 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The 32 bit number that uniquely identifies the originating router in the Autonomous System. | ||||
| CaxsOspfExtLsdbSequence | 1.3.6.1.4.1.21839.2.2.1.14.12.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The sequence number field is a signed 32-bit integer. | ||||
| CaxsOspfExtLsdbAge | 1.3.6.1.4.1.21839.2.2.1.14.12.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The age of the link state advertisement in seconds. | ||||
| CaxsOspfExtLsdbChecksum | 1.3.6.1.4.1.21839.2.2.1.14.12.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. | ||||
| CaxsOspfExtLsdbAdvertisement | 1.3.6.1.4.1.21839.2.2.1.14.12.1.8 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory The entire Link State Advertisement, including its header. | ||||
| TaxsOspfAreaAggregateTable | 1.3.6.1.4.1.21839.2.2.1.14.14 | NA | mandatory | |
table · not-accessible · mandatory A range of IP addresses specified by an IP address/IP network mask pair. | ||||
| RaxsOspfAreaAggregateEntry | 1.3.6.1.4.1.21839.2.2.1.14.14.1 | NA | mandatory | |
row · not-accessible · mandatory A range of IP addresses specified by an IP address/IP network mask pair. | ||||
| CaxsOspfAreaAggregateDomainNumber | 1.3.6.1.4.1.21839.2.2.1.14.14.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory OSPF domain number. | ||||
| CaxsOspfAreaAggregateAreaID | 1.3.6.1.4.1.21839.2.2.1.14.14.1.2 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The Area the Address Aggregate is to be found within. | ||||
| CaxsOspfAreaAggregateLsdbType | 1.3.6.1.4.1.21839.2.2.1.14.14.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The type of the Address Aggregate. This field specifies the Lsdb type that this Address Aggregate applies to.
| ||||
| CaxsOspfAreaAggregateNet | 1.3.6.1.4.1.21839.2.2.1.14.14.1.4 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The IP Address of the Net or Subnet indicated by the range. | ||||
| CaxsOspfAreaAggregateMask | 1.3.6.1.4.1.21839.2.2.1.14.14.1.5 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The Subnet Mask that pertains to the Net or Subnet. | ||||
| CaxsOspfAreaAggregateStatus | 1.3.6.1.4.1.21839.2.2.1.14.14.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory This variable displays the status of the entry. This entry value is only valid(1).
| ||||
| CaxsOspfAreaAggregateEffect | 1.3.6.1.4.1.21839.2.2.1.14.14.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Subnets subsumed by ranges either trigger the advertisement of the indicated aggregate (ad- vertiseMatching), or result in the subnet's not being advertised at all outside the area.
| ||||
| NaxsOspfTrap | 1.3.6.1.4.1.21839.2.2.1.14.16 | |||
| TaxsOspfTrapControlTable | 1.3.6.1.4.1.21839.2.2.1.14.16.1 | NA | mandatory | |
table · not-accessible · mandatory The table about trap information. | ||||
| RaxsOspfTrapControlEntry | 1.3.6.1.4.1.21839.2.2.1.14.16.1.1 | NA | mandatory | |
| CaxsOspfTrapDomainNumber | 1.3.6.1.4.1.21839.2.2.1.14.16.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory axsOspfTrap domain number. | ||||
| CaxsOspfSetTrap | 1.3.6.1.4.1.21839.2.2.1.14.16.1.1.2 | OCTET STRING | RW | mandatory |
column · OCTET STRING · read-write · mandatory A four-octet string serving as a bit map for the trap events defined by the OSPF traps. This object is used to enable and disable specific OSPF traps where a 1 in the bit field represents enabled. The right-most bit (least significant) represents trap 0. | ||||
| CaxsOspfConfigErrorType | 1.3.6.1.4.1.21839.2.2.1.14.16.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Potential types of configuration conflicts. Used by the ospfConfigError and ospfConfigVir- tError traps.
| ||||
| CaxsOspfPacketType | 1.3.6.1.4.1.21839.2.2.1.14.16.1.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory OSPF packet types.
| ||||
| CaxsOspfPacketSrc | 1.3.6.1.4.1.21839.2.2.1.14.16.1.1.5 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The IP address of an inbound packet that can- not be identified by a neighbor instance. | ||||
| NaxsOspfTraps | 1.3.6.1.4.1.21839.2.2.1.14.16.2 | |||
| !axsOspfVirtIfStateChange | 1.3.6.1.4.1.21839.2.2.1.14.16.2.0.1 | |||
notification An axsOspfIfStateChange trap signifies that there has been a change in the state of an OSPF virtual interface. | ||||
| !axsOspfNbrStateChange | 1.3.6.1.4.1.21839.2.2.1.14.16.2.0.2 | |||
notification An axsOspfNbrStateChange trap signifies that there has been a change in the state of a non- virtual OSPF neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full). When an neighbor transitions from or to Full on non-broadcast multi-access and broadcast networks, the trap should be gen- erated by the designated router. A designated router transitioning to Down will be noted by axsOspfIfStateChange. | ||||
| !axsOspfVirtNbrStateChange | 1.3.6.1.4.1.21839.2.2.1.14.16.2.0.3 | |||
notification An axsOspfIfStateChange trap signifies that there has been a change in the state of an OSPF vir- tual neighbor. This trap should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full). | ||||
| !axsOspfIfConfigError | 1.3.6.1.4.1.21839.2.2.1.14.16.2.0.4 | |||
notification An axsOspfIfConfigError trap signifies that a packet has been received on a non-virtual in- terface from a router whose configuration parameters conflict with this router's confi- guration parameters. Note that the event op- tionMismatch should cause a trap only if it prevents an adjacency from forming. | ||||
| !axsOspfVirtIfConfigError | 1.3.6.1.4.1.21839.2.2.1.14.16.2.0.5 | |||
notification An axsOspfConfigError trap signifies that a pack- et has been received on a virtual interface from a router whose configuration parameters conflict with this router's configuration parameters. Note that the event optionMismatch should cause a trap only if it prevents an ad- jacency from forming. | ||||
| !axsOspfIfAuthFailure | 1.3.6.1.4.1.21839.2.2.1.14.16.2.0.6 | |||
notification An axsOspfIfAuthFailure trap signifies that a packet has been received on a non-virtual in- terface from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type. | ||||
| !axsOspfVirtIfAuthFailure | 1.3.6.1.4.1.21839.2.2.1.14.16.2.0.7 | |||
notification An axsOspfVirtIfAuthFailure trap signifies that a packet has been received on a virtual interface from a router whose authentication key or au- thentication type conflicts with this router's authentication key or authentication type. | ||||
| !axsOspfIfStateChange | 1.3.6.1.4.1.21839.2.2.1.14.16.2.0.16 | |||
notification An axsOspfIfStateChange trap signifies that there has been a change in the state of a non-virtual OSPF interface. This trap should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup). | ||||
| NaxsOspfv3 | 1.3.6.1.4.1.21839.2.2.1.15 | |||
| TaxsOspfv3GeneralTable | 1.3.6.1.4.1.21839.2.2.1.15.1 | NA | mandatory | |
table · not-accessible · mandatory The table which ospfv3 information is stored in. | ||||
| RaxsOspfv3GeneralEntry | 1.3.6.1.4.1.21839.2.2.1.15.1.1 | NA | mandatory | |
row · not-accessible · mandatory The list of the ospfv3 information. | ||||
| CaxsOspfv3GeneralDomainNumber | 1.3.6.1.4.1.21839.2.2.1.15.1.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory ospfv3 domain number. | ||||
| CaxsOspfv3RouterId | 1.3.6.1.4.1.21839.2.2.1.15.1.1.2 | RouterID | RO | mandatory |
column · RouterID · read-only · mandatory A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's IPv4 interface addresses if IPv4 is configured. | ||||
| CaxsOspfv3AdminStat | 1.3.6.1.4.1.21839.2.2.1.15.1.1.3 | Status | RO | mandatory |
column · Status · read-only · mandatory The administrative status of axsOspfv3 in the router. The value 'enabled' denotes that the axsOspfv3 Process is active on at least one inter- face; 'disabled' disables it on all inter- faces. | ||||
| CaxsOspfv3VersionNumber | 1.3.6.1.4.1.21839.2.2.1.15.1.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The version number of OSPF for IPv6 is 3.
| ||||
| CaxsOspfv3AreaBdrRtrStatus | 1.3.6.1.4.1.21839.2.2.1.15.1.1.5 | TruthValue | RO | mandatory |
column · TruthValue · read-only · mandatory A flag to note whether this router is an area border router. | ||||
| CaxsOspfv3ASBdrRtrStatus | 1.3.6.1.4.1.21839.2.2.1.15.1.1.6 | TruthValue | RO | mandatory |
column · TruthValue · read-only · mandatory A flag to note whether this router is config- ured as an Autonomous System border router. | ||||
| CaxsOspfv3AsScopeLsaCount | 1.3.6.1.4.1.21839.2.2.1.15.1.1.7 | Gauge32 | RO | mandatory |
column · Gauge32 · read-only · mandatory The number of AS-Scope (e.g. AS-External) link-state advertisements in the link-state database. | ||||
| CaxsOspfv3AsScopeLsaCksumSum | 1.3.6.1.4.1.21839.2.2.1.15.1.1.8 | Integer32 | RO | mandatory |
column · Integer32 · read-only · mandatory The 32-bit unsigned sum of the LS checksums of the AS-scoped link-state advertisements con- tained in the link-state database. This sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers. | ||||
| CaxsOspfv3OriginateNewLsas | 1.3.6.1.4.1.21839.2.2.1.15.1.1.9 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The number of new link-state advertisements that have been originated. This number is in- cremented each time the router originates a new LSA. | ||||
| CaxsOspfv3RxNewLsas | 1.3.6.1.4.1.21839.2.2.1.15.1.1.10 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The number of link-state advertisements re- ceived determined to be new instantiations. This number does not include newer instantia- tions of self-originated link-state advertise- ments. | ||||
| CaxsOspfv3ExtAreaLsdbLimit | 1.3.6.1.4.1.21839.2.2.1.15.1.1.11 | Integer32 (-1..2147483647) | RO | mandatory |
column · Integer32 (-1..2147483647) · read-only · mandatory The maximum number of non-default AS- external-LSAs entries that can be stored in the link-state database. If the value is -1, then there is no limit. When the number of non-default AS-external-LSAs in a router's link-state database reaches axsOspfv3ExtAreaLsdbLimit, the router enters Overflow- State. The router never holds more than axsOspfv3ExtAreaLsdbLimit non-default AS-external-LSAs in its database. OspfExtAreaLsdbLimit MUST be set identically in all routers attached to the axsOspfv3 backbone and/or any regular axsOspfv3 area. (i.e., axsOspfv3 stub areas and NSSAs are excluded). | ||||
| CaxsOspfv3MulticastExtensions | 1.3.6.1.4.1.21839.2.2.1.15.1.1.12 | Integer32 | RO | mandatory |
column · Integer32 · read-only · mandatory A Bit Mask indicating whether the router is forwarding IPv6 multicast datagrams based on the algorithms defined in the Multi- cast Extensions to OSPF. Bit 0, if set, indicates that the router can forward IPv6 multicast datagrams in the router's directly attached areas (called intra-area mul- ticast routing). Bit 1, if set, indicates that the router can forward IPv6 multicast datagrams between axsOspfv3 areas (called inter-area multicast routing). Bit 2, if set, indicates that the router can forward IPv6 multicast datagrams between Auto- nomous Systems (called inter-AS multicast rout- ing). Only certain combinations of bit settings are allowed, namely: 0 (no multicast forwarding is enabled), 1 (intra-area multicasting only), 3 (intra-area and inter-area multicasting), 5 (intra-area and inter-AS multicasting) and 7 (multicasting everywhere). By default, no mul- ticast forwarding is enabled. | ||||
| CaxsOspfv3DemandExtensions | 1.3.6.1.4.1.21839.2.2.1.15.1.1.14 | TruthValue | RO | mandatory |
column · TruthValue · read-only · mandatory The router's support for demand routing. | ||||
| CaxsOspfv3TrafficEngineeringSupport | 1.3.6.1.4.1.21839.2.2.1.15.1.1.15 | TruthValue | RO | mandatory |
column · TruthValue · read-only · mandatory The router's support for traffic engineering extensions. | ||||
| TaxsOspfv3AreaTable | 1.3.6.1.4.1.21839.2.2.1.15.2 | NA | mandatory | |
table · not-accessible · mandatory Information describing the configured parame- ters and cumulative statistics of the router's attached areas. | ||||
| RaxsOspfv3AreaEntry | 1.3.6.1.4.1.21839.2.2.1.15.2.1 | NA | mandatory | |
row · not-accessible · mandatory Information describing the configured parame- ters and cumulative statistics of one of the router's attached areas. | ||||
| CaxsOspfv3AreaDomainNumber | 1.3.6.1.4.1.21839.2.2.1.15.2.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory ospfv3 domain number. | ||||
| CaxsOspfv3AreaId | 1.3.6.1.4.1.21839.2.2.1.15.2.1.2 | AreaID | RO | mandatory |
column · AreaID · read-only · mandatory A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the axsOspfv3 backbone. | ||||
| CaxsOspfv3ImportAsExtern | 1.3.6.1.4.1.21839.2.2.1.15.2.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Indicates whether an area is a Stub area, NSSA, or standard area. AS-scope LSAs are not imported into Stub Areas or NSSAs. NSSAs import AS-External data as Type-7 LSAs which have Area-scope
| ||||
| CaxsOspfv3SpfRuns | 1.3.6.1.4.1.21839.2.2.1.15.2.1.4 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The number of times that the intra-area route table has been calculated using this area's link-state database. This is typically done using Dijkstra's algorithm. | ||||
| CaxsOspfv3AreaBdrRtrCount | 1.3.6.1.4.1.21839.2.2.1.15.2.1.5 | Gauge32 | RO | mandatory |
column · Gauge32 · read-only · mandatory The total number of area border routers reach- able within this area. This is initially zero, and is calculated in each SPF Pass. | ||||
| CaxsOspfv3AsBdrRtrCount | 1.3.6.1.4.1.21839.2.2.1.15.2.1.6 | Gauge32 | RO | mandatory |
column · Gauge32 · read-only · mandatory The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass. | ||||
| CaxsOspfv3AreaScopeLsaCount | 1.3.6.1.4.1.21839.2.2.1.15.2.1.7 | Gauge32 | RO | mandatory |
column · Gauge32 · read-only · mandatory The total number of Area-Scope link-state advertisements in this area's link-state database. | ||||
| CaxsOspfv3AreaScopeLsaCksumSum | 1.3.6.1.4.1.21839.2.2.1.15.2.1.8 | Integer32 | RO | mandatory |
column · Integer32 · read-only · mandatory The 32-bit unsigned sum of the Area-Scope link-state advertisements' LS checksums contained in this area's link-state database. The sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers. | ||||
| CaxsOspfv3AreaSummary | 1.3.6.1.4.1.21839.2.2.1.15.2.1.9 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The variable axsOspfv3AreaSummary controls the im- port of summary LSAs into stub areas. It has no effect on other areas. If it is noAreaSummary, the router will neither originate nor propagate summary LSAs into the stub area. It will rely entirely on its de- fault route. If it is sendAreaSummary, the router will both summarize and propagate summary LSAs.
| ||||
| CaxsOspfv3AreaStatus | 1.3.6.1.4.1.21839.2.2.1.15.2.1.10 | RowStatus | RO | mandatory |
column · RowStatus · read-only · mandatory This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent. | ||||
| CaxsOspfv3StubMetric | 1.3.6.1.4.1.21839.2.2.1.15.2.1.11 | BigMetric | RO | mandatory |
column · BigMetric · read-only · mandatory The metric value advertised for the default route into Stub and NSSA areas. | ||||
| TaxsOspfv3AsLsdbTable | 1.3.6.1.4.1.21839.2.2.1.15.3 | NA | mandatory | |
table · not-accessible · mandatory The axsOspfv3 Process's AS-Scope Link State Database. | ||||
| RaxsOspfv3AsLsdbEntry | 1.3.6.1.4.1.21839.2.2.1.15.3.1 | NA | mandatory | |
row · not-accessible · mandatory A single AS-Scope Link State Advertisement. | ||||
| CaxsOspfv3AsLsdbDomainNumber | 1.3.6.1.4.1.21839.2.2.1.15.3.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory ospfv3 domain number. | ||||
| CaxsOspfv3AsLsdbType | 1.3.6.1.4.1.21839.2.2.1.15.3.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The type of the link state advertisement. Each link state type has a separate advertise- ment format. Unrecognized AS-Scope LSAs with the U-bit set are also store in this database.
| ||||
| CaxsOspfv3AsLsdbRouterId | 1.3.6.1.4.1.21839.2.2.1.15.3.1.3 | RouterID | RO | mandatory |
column · RouterID · read-only · mandatory The 32 bit number that uniquely identifies the originating router in the Autonomous System. | ||||
| CaxsOspfv3AsLsdbLsid | 1.3.6.1.4.1.21839.2.2.1.15.3.1.4 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The Link State ID is an LS Type Specific field containing either a Router ID or a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPF for IPv4, the LSID has no addressing semantics. | ||||
| CaxsOspfv3AsLsdbSequence | 1.3.6.1.4.1.21839.2.2.1.15.3.1.5 | Integer32 | RO | mandatory |
column · Integer32 · read-only · mandatory The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement. | ||||
| CaxsOspfv3AsLsdbAge | 1.3.6.1.4.1.21839.2.2.1.15.3.1.6 | Integer32 | RO | mandatory |
column · Integer32 · read-only · mandatory This field is the age of the link state adver- tisement in seconds. | ||||
| CaxsOspfv3AsLsdbChecksum | 1.3.6.1.4.1.21839.2.2.1.15.3.1.7 | Integer32 | RO | mandatory |
column · Integer32 · read-only · mandatory This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum. | ||||
| CaxsOspfv3AsLsdbAdvertisement | 1.3.6.1.4.1.21839.2.2.1.15.3.1.8 | OCTET STRING (SIZE (1..65535)) | RO | mandatory |
column · OCTET STRING (SIZE (1..65535)) · read-only · mandatory The entire Link State Advertisement, including its header. | ||||
| TaxsOspfv3AreaLsdbTable | 1.3.6.1.4.1.21839.2.2.1.15.4 | NA | mandatory | |
table · not-accessible · mandatory The axsOspfv3 Process's Area-Scope Link State Database. | ||||
| RaxsOspfv3AreaLsdbEntry | 1.3.6.1.4.1.21839.2.2.1.15.4.1 | NA | mandatory | |
row · not-accessible · mandatory A single Area-Scope Link State Advertisement. | ||||
| CaxsOspfv3AreaLsdbDomainNumber | 1.3.6.1.4.1.21839.2.2.1.15.4.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory ospfv3 domain number. | ||||
| CaxsOspfv3AreaLsdbAreaId | 1.3.6.1.4.1.21839.2.2.1.15.4.1.2 | AreaID | RO | mandatory |
column · AreaID · read-only · mandatory The 32 bit identifier of the Area from which the LSA was received. | ||||
| CaxsOspfv3AreaLsdbType | 1.3.6.1.4.1.21839.2.2.1.15.4.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The type of the link state advertisement. Each link state type has a separate advertise- ment format. Unrecognized Area-Scope LSAs with the U-bit set are also stored in this database.
| ||||
| CaxsOspfv3AreaLsdbRouterId | 1.3.6.1.4.1.21839.2.2.1.15.4.1.4 | RouterID | RO | mandatory |
column · RouterID · read-only · mandatory The 32 bit number that uniquely identifies the originating router in the Autonomous System. | ||||
| CaxsOspfv3AreaLsdbLsid | 1.3.6.1.4.1.21839.2.2.1.15.4.1.5 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The Link State ID is an LS Type Specific field containing either a Router ID or a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPF for IPv4, the LSID has no addressing semantics. | ||||
| CaxsOspfv3AreaLsdbSequence | 1.3.6.1.4.1.21839.2.2.1.15.4.1.6 | Integer32 | RO | mandatory |
column · Integer32 · read-only · mandatory The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement. | ||||
| CaxsOspfv3AreaLsdbAge | 1.3.6.1.4.1.21839.2.2.1.15.4.1.7 | Integer32 | RO | mandatory |
column · Integer32 · read-only · mandatory This field is the age of the link state adver- tisement in seconds. | ||||
| CaxsOspfv3AreaLsdbChecksum | 1.3.6.1.4.1.21839.2.2.1.15.4.1.8 | Integer32 | RO | mandatory |
column · Integer32 · read-only · mandatory This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum. | ||||
| CaxsOspfv3AreaLsdbAdvertisement | 1.3.6.1.4.1.21839.2.2.1.15.4.1.9 | OCTET STRING (SIZE (1..65535)) | RO | mandatory |
column · OCTET STRING (SIZE (1..65535)) · read-only · mandatory The entire Link State Advertisement, including its header. | ||||
| TaxsOspfv3LinkLsdbTable | 1.3.6.1.4.1.21839.2.2.1.15.5 | NA | mandatory | |
table · not-accessible · mandatory The axsOspfv3 Process's Link-Scope Link State Database. | ||||
| RaxsOspfv3LinkLsdbEntry | 1.3.6.1.4.1.21839.2.2.1.15.5.1 | NA | mandatory | |
row · not-accessible · mandatory A single Link-Scope Link State Advertisement. | ||||
| CaxsOspfv3LinkLsdbDomainNumber | 1.3.6.1.4.1.21839.2.2.1.15.5.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory ospfv3 domain number. | ||||
| CaxsOspfv3LinkLsdbIfIndex | 1.3.6.1.4.1.21839.2.2.1.15.5.1.2 | Ipv6IfIndex | RO | mandatory |
column · Ipv6IfIndex · read-only · mandatory The identifier of the link from which the LSA was received. | ||||
| CaxsOspfv3LinkLsdbType | 1.3.6.1.4.1.21839.2.2.1.15.5.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The type of the link state advertisement. Each link state type has a separate advertise- ment format. Unrecognized Link-Scope LSAs with the U-bit set are also stored in this database.
| ||||
| CaxsOspfv3LinkLsdbRouterId | 1.3.6.1.4.1.21839.2.2.1.15.5.1.4 | RouterID | RO | mandatory |
column · RouterID · read-only · mandatory The 32 bit number that uniquely identifies the originating router in the Autonomous System. | ||||
| CaxsOspfv3LinkLsdbLsid | 1.3.6.1.4.1.21839.2.2.1.15.5.1.5 | IpAddress | RO | mandatory |
column · IpAddress · read-only · mandatory The Link State ID is an LS Type Specific field containing either a Router ID or a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPF for IPv4, the LSID has no addressing semantics. | ||||
| CaxsOspfv3LinkLsdbSequence | 1.3.6.1.4.1.21839.2.2.1.15.5.1.6 | Integer32 | RO | mandatory |
column · Integer32 · read-only · mandatory The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement. | ||||
| CaxsOspfv3LinkLsdbAge | 1.3.6.1.4.1.21839.2.2.1.15.5.1.7 | Integer32 | RO | mandatory |
column · Integer32 · read-only · mandatory This field is the age of the link state adver- tisement in seconds. | ||||
| CaxsOspfv3LinkLsdbChecksum | 1.3.6.1.4.1.21839.2.2.1.15.5.1.8 | Integer32 | RO | mandatory |
column · Integer32 · read-only · mandatory This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connec- tionless datagrams; it is commonly referred to as the Fletcher checksum. | ||||
| CaxsOspfv3LinkLsdbAdvertisement | 1.3.6.1.4.1.21839.2.2.1.15.5.1.9 | OCTET STRING (SIZE (1..65535)) | RO | mandatory |
column · OCTET STRING (SIZE (1..65535)) · read-only · mandatory The entire Link State Advertisement, including its header. | ||||
| TaxsOspfv3IfTable | 1.3.6.1.4.1.21839.2.2.1.15.7 | NA | mandatory | |
table · not-accessible · mandatory The axsOspfv3 Interface Table describes the inter- faces from the viewpoint of axsOspfv3. | ||||
| RaxsOspfv3IfEntry | 1.3.6.1.4.1.21839.2.2.1.15.7.1 | NA | mandatory | |
row · not-accessible · mandatory The axsOspfv3 Interface Entry describes one inter- face from the viewpoint of axsOspfv3. | ||||
| CaxsOspfv3IfDomainNumber | 1.3.6.1.4.1.21839.2.2.1.15.7.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory ospfv3 domain number. | ||||
| CaxsOspfv3IfIndex | 1.3.6.1.4.1.21839.2.2.1.15.7.1.2 | Ipv6IfIndex | RO | mandatory |
column · Ipv6IfIndex · read-only · mandatory The interface index of this axsOspfv3 interface. It corresponds to the interface index of the Ipv6 interface on which axsOspfv3 is configured. | ||||
| CaxsOspfv3IfAreaId | 1.3.6.1.4.1.21839.2.2.1.15.7.1.3 | AreaID | RO | mandatory |
column · AreaID · read-only · mandatory A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the axsOspfv3 backbone. | ||||
| CaxsOspfv3IfType | 1.3.6.1.4.1.21839.2.2.1.15.7.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The axsOspfv3 interface type.
| ||||
| CaxsOspfv3IfAdminStat | 1.3.6.1.4.1.21839.2.2.1.15.7.1.5 | Status | RO | mandatory |
column · Status · read-only · mandatory The axsOspfv3 interface's administrative status. The value formed on the interface, and the in- terface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to axsOspfv3. | ||||
| CaxsOspfv3IfRtrPriority | 1.3.6.1.4.1.21839.2.2.1.15.7.1.6 | DesignatedRouterPriority | RO | mandatory |
column · DesignatedRouterPriority · read-only · mandatory The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligi- ble to become the designated router on this particular network. In the event of a tie in this value, routers will use their Router ID as a tie breaker. | ||||
| CaxsOspfv3IfTransitDelay | 1.3.6.1.4.1.21839.2.2.1.15.7.1.7 | UpToMaxAge | RO | mandatory |
column · UpToMaxAge · read-only · mandatory The estimated number of seconds it takes to transmit a link state update packet over this interface. | ||||
| CaxsOspfv3IfRetransInterval | 1.3.6.1.4.1.21839.2.2.1.15.7.1.8 | UpToMaxAge | RO | mandatory |
column · UpToMaxAge · read-only · mandatory The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request packets. | ||||
| CaxsOspfv3IfHelloInterval | 1.3.6.1.4.1.21839.2.2.1.15.7.1.9 | HelloRange | RO | mandatory |
column · HelloRange · read-only · mandatory The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a common network. | ||||
| CaxsOspfv3IfRtrDeadInterval | 1.3.6.1.4.1.21839.2.2.1.15.7.1.10 | PositiveInteger | RO | mandatory |
column · PositiveInteger · read-only · mandatory The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network. | ||||
| CaxsOspfv3IfPollInterval | 1.3.6.1.4.1.21839.2.2.1.15.7.1.11 | PositiveInteger | RO | mandatory |
column · PositiveInteger · read-only · mandatory The larger time interval, in seconds, between the Hello packets sent to an inactive non- broadcast multi- access neighbor. | ||||
| CaxsOspfv3IfState | 1.3.6.1.4.1.21839.2.2.1.15.7.1.12 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The axsOspfv3 Interface State.
| ||||
| CaxsOspfv3IfDesignatedRouter | 1.3.6.1.4.1.21839.2.2.1.15.7.1.13 | RouterID | RO | mandatory |
column · RouterID · read-only · mandatory The Router ID of the Designated Router. | ||||
| CaxsOspfv3IfBackupDesignatedRouter | 1.3.6.1.4.1.21839.2.2.1.15.7.1.15 | RouterID | RO | mandatory |
column · RouterID · read-only · mandatory The Router ID of the Backup Designated Router. | ||||
| CaxsOspfv3IfEvents | 1.3.6.1.4.1.21839.2.2.1.15.7.1.16 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The number of times this OSPF interface has changed its state, or an error has occurred. | ||||
| CaxsOspfv3IfStatus | 1.3.6.1.4.1.21839.2.2.1.15.7.1.18 | RowStatus | RO | mandatory |
column · RowStatus · read-only · mandatory This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent. | ||||
| CaxsOspfv3IfMulticastForwarding | 1.3.6.1.4.1.21839.2.2.1.15.7.1.19 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link uni- casts. Data link multicasting is not meaning- ful on point to point and NBMA interfaces, and setting axsOspfv3MulticastForwarding to 0 effective- ly disables all multicast forwarding.
| ||||
| CaxsOspfv3IfDemand | 1.3.6.1.4.1.21839.2.2.1.15.7.1.20 | TruthValue | RO | mandatory |
column · TruthValue · read-only · mandatory Indicates whether Demand axsOspfv3 procedures (hel- lo supression to FULL neighbors and setting the DoNotAge flag on proogated LSAs) should be per- formed on this interface. | ||||
| CaxsOspfv3IfMetricValue | 1.3.6.1.4.1.21839.2.2.1.15.7.1.21 | Metric | RO | mandatory |
column · Metric · read-only · mandatory The metric assigned to this interface. The default value of the Metric is 10^8 / ifSpeed. | ||||
| CaxsOspfv3IfLinkScopeLsaCount | 1.3.6.1.4.1.21839.2.2.1.15.7.1.22 | Gauge32 | RO | mandatory |
column · Gauge32 · read-only · mandatory The total number of Link-Scope link-state advertisements in this link's link-state database. | ||||
| CaxsOspfv3IfLinkLsaCksumSum | 1.3.6.1.4.1.21839.2.2.1.15.7.1.23 | Integer32 | RO | mandatory |
column · Integer32 · read-only · mandatory The 32-bit unsigned sum of the Link-Scope link-state advertisements' LS checksums contained in this link's link-state database. The sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers. | ||||
| CaxsOspfv3IfInstId | 1.3.6.1.4.1.21839.2.2.1.15.7.1.24 | Integer32 | RO | mandatory |
column · Integer32 · read-only · mandatory Enables multiple instances of axsOspfv3 to be run over a single link. Each protocol instance would be assigned a separate ID. This ID has local link significance only. | ||||
| TaxsOspfv3VirtIfTable | 1.3.6.1.4.1.21839.2.2.1.15.8 | NA | mandatory | |
table · not-accessible · mandatory Information about this router's virtual inter- faces. | ||||
| RaxsOspfv3VirtIfEntry | 1.3.6.1.4.1.21839.2.2.1.15.8.1 | NA | mandatory | |
row · not-accessible · mandatory Information about a single Virtual Interface. | ||||
| CaxsOspfv3VirtIfDomainNumber | 1.3.6.1.4.1.21839.2.2.1.15.8.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory ospfv3 domain number. | ||||
| CaxsOspfv3VirtIfAreaId | 1.3.6.1.4.1.21839.2.2.1.15.8.1.2 | AreaID | RO | mandatory |
column · AreaID · read-only · mandatory The Transit Area that the Virtual Link traverses. By definition, this is not 0.0.0.0 | ||||
| CaxsOspfv3VirtIfNeighbor | 1.3.6.1.4.1.21839.2.2.1.15.8.1.3 | RouterID | RO | mandatory |
column · RouterID · read-only · mandatory The Router ID of the Virtual Neighbor. | ||||
| CaxsOspfv3VirtIfIndex | 1.3.6.1.4.1.21839.2.2.1.15.8.1.4 | Ipv6IfIndex | RO | mandatory |
column · Ipv6IfIndex · read-only · mandatory The interface index of this axsOspfv3 virtual interface. It must be unique among all the interface indices on the router. | ||||
| CaxsOspfv3VirtIfTransitDelay | 1.3.6.1.4.1.21839.2.2.1.15.8.1.5 | UpToMaxAge | RO | mandatory |
column · UpToMaxAge · read-only · mandatory The estimated number of seconds it takes to transmit a link- state update packet over this interface. | ||||
| CaxsOspfv3VirtIfRetransInterval | 1.3.6.1.4.1.21839.2.2.1.15.8.1.6 | UpToMaxAge | RO | mandatory |
column · UpToMaxAge · read-only · mandatory The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request packets. This value should be well over the expected round- trip time. | ||||
| CaxsOspfv3VirtIfHelloInterval | 1.3.6.1.4.1.21839.2.2.1.15.8.1.7 | HelloRange | RO | mandatory |
column · HelloRange · read-only · mandatory The length of time, in seconds, between the Hello packets that the router sends on the in- terface. This value must be the same for the virtual neighbor. | ||||
| CaxsOspfv3VirtIfRtrDeadInterval | 1.3.6.1.4.1.21839.2.2.1.15.8.1.8 | PositiveInteger | RO | mandatory |
column · PositiveInteger · read-only · mandatory The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neigh- bor. | ||||
| CaxsOspfv3VirtIfState | 1.3.6.1.4.1.21839.2.2.1.15.8.1.9 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory OSPF virtual interface states.
| ||||
| CaxsOspfv3VirtIfEvents | 1.3.6.1.4.1.21839.2.2.1.15.8.1.10 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The number of state changes or error events on this Virtual Link | ||||
| CaxsOspfv3VirtIfStatus | 1.3.6.1.4.1.21839.2.2.1.15.8.1.11 | RowStatus | RO | mandatory |
column · RowStatus · read-only · mandatory This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent. | ||||
| CaxsOspfv3VirtIfLinkScopeLsaCount | 1.3.6.1.4.1.21839.2.2.1.15.8.1.12 | Gauge32 | RO | mandatory |
column · Gauge32 · read-only · mandatory The total number of Link-Scope link-state advertisements in this virtual link's link-state database. | ||||
| CaxsOspfv3VirtIfLinkLsaCksumSum | 1.3.6.1.4.1.21839.2.2.1.15.8.1.13 | Integer32 | RO | mandatory |
column · Integer32 · read-only · mandatory The 32-bit unsigned sum of the Link-Scope link-state advertisements' LS checksums contained in this virtual link's link-state database. The sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers. | ||||
| TaxsOspfv3NbrTable | 1.3.6.1.4.1.21839.2.2.1.15.9 | NA | mandatory | |
table · not-accessible · mandatory A table of non-virtual neighbor information. | ||||
| RaxsOspfv3NbrEntry | 1.3.6.1.4.1.21839.2.2.1.15.9.1 | NA | mandatory | |
row · not-accessible · mandatory The information regarding a single neighbor. | ||||
| CaxsOspfv3NbrDomainNumber | 1.3.6.1.4.1.21839.2.2.1.15.9.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory ospfv3 domain number. | ||||
| CaxsOspfv3NbrIfIndex | 1.3.6.1.4.1.21839.2.2.1.15.9.1.2 | Ipv6IfIndex | RO | mandatory |
column · Ipv6IfIndex · read-only · mandatory The local link ID of the link over which the neighbor can be reached. | ||||
| CaxsOspfv3NbrIpv6Addr | 1.3.6.1.4.1.21839.2.2.1.15.9.1.3 | Ipv6Address | RO | mandatory |
column · Ipv6Address · read-only · mandatory The IPv6 address of the neighbor associated with the local link. | ||||
| CaxsOspfv3NbrRtrId | 1.3.6.1.4.1.21839.2.2.1.15.9.1.4 | RouterID | RO | mandatory |
column · RouterID · read-only · mandatory A 32-bit integer (represented as a type IpAd- dress) uniquely identifying the neighboring router in the Autonomous System. | ||||
| CaxsOspfv3NbrOptions | 1.3.6.1.4.1.21839.2.2.1.15.9.1.5 | Integer32 | RO | mandatory |
column · Integer32 · read-only · mandatory A Bit Mask corresponding to the neighbor's op- tions field. | ||||
| CaxsOspfv3NbrPriority | 1.3.6.1.4.1.21839.2.2.1.15.9.1.6 | DesignatedRouterPriority | RO | mandatory |
column · DesignatedRouterPriority · read-only · mandatory The priority of this neighbor in the designat- ed router election algorithm. The value 0 sig- nifies that the neighbor is not eligible to be- come the designated router on this particular network. | ||||
| CaxsOspfv3NbrState | 1.3.6.1.4.1.21839.2.2.1.15.9.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The State of the relationship with this Neigh- bor.
| ||||
| CaxsOspfv3NbrEvents | 1.3.6.1.4.1.21839.2.2.1.15.9.1.8 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The number of times this neighbor relationship has changed state, or an error has occurred. | ||||
| CaxsOspfv3NbrLsRetransQLen | 1.3.6.1.4.1.21839.2.2.1.15.9.1.9 | Gauge32 | RO | mandatory |
column · Gauge32 · read-only · mandatory The current length of the retransmission queue. | ||||
| CaxsOspfv3NbrHelloSuppressed | 1.3.6.1.4.1.21839.2.2.1.15.9.1.12 | TruthValue | RO | mandatory |
column · TruthValue · read-only · mandatory Indicates whether Hellos are being suppressed to the neighbor | ||||
| CaxsOspfv3NbrIfId | 1.3.6.1.4.1.21839.2.2.1.15.9.1.13 | Ipv6IfIndex | RO | mandatory |
column · Ipv6IfIndex · read-only · mandatory The interface ID that the neighbor advertises in its Hello Packets on this link, that is, the neighbor's local interface index. | ||||
| TaxsOspfv3VirtNbrTable | 1.3.6.1.4.1.21839.2.2.1.15.10 | NA | mandatory | |
table · not-accessible · mandatory A table of virtual neighbor information. | ||||
| RaxsOspfv3VirtNbrEntry | 1.3.6.1.4.1.21839.2.2.1.15.10.1 | NA | mandatory | |
row · not-accessible · mandatory Virtual neighbor information. | ||||
| CaxsOspfv3VirtNbrDomainNumber | 1.3.6.1.4.1.21839.2.2.1.15.10.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory ospfv3 domain number. | ||||
| CaxsOspfv3VirtNbrArea | 1.3.6.1.4.1.21839.2.2.1.15.10.1.2 | AreaID | RO | mandatory |
column · AreaID · read-only · mandatory The Transit Area Identifier. | ||||
| CaxsOspfv3VirtNbrRtrId | 1.3.6.1.4.1.21839.2.2.1.15.10.1.3 | RouterID | RO | mandatory |
column · RouterID · read-only · mandatory A 32-bit integer uniquely identifying the neighboring router in the Autonomous System. | ||||
| CaxsOspfv3VirtNbrIfIndex | 1.3.6.1.4.1.21839.2.2.1.15.10.1.4 | Ipv6IfIndex | RO | mandatory |
column · Ipv6IfIndex · read-only · mandatory The local link ID for the virtual link over which the neighbor can be reached. | ||||
| CaxsOspfv3VirtNbrIpv6Addr | 1.3.6.1.4.1.21839.2.2.1.15.10.1.5 | Ipv6Address | RO | mandatory |
column · Ipv6Address · read-only · mandatory The IPv6 address used to reach this Virtual Neighbor. It must be a Site-Local or Global scope address. | ||||
| CaxsOspfv3VirtNbrOptions | 1.3.6.1.4.1.21839.2.2.1.15.10.1.6 | Integer32 | RO | mandatory |
column · Integer32 · read-only · mandatory A Bit Mask corresponding to the neighbor's op- tions field. | ||||
| CaxsOspfv3VirtNbrState | 1.3.6.1.4.1.21839.2.2.1.15.10.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The state of the Virtual Neighbor Relation- ship.
| ||||
| CaxsOspfv3VirtNbrEvents | 1.3.6.1.4.1.21839.2.2.1.15.10.1.8 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The number of times this virtual link has changed its state, or an error has occurred. | ||||
| CaxsOspfv3VirtNbrLsRetransQLen | 1.3.6.1.4.1.21839.2.2.1.15.10.1.9 | Gauge32 | RO | mandatory |
column · Gauge32 · read-only · mandatory The current length of the retransmission queue. | ||||
| CaxsOspfv3VirtNbrHelloSuppressed | 1.3.6.1.4.1.21839.2.2.1.15.10.1.10 | TruthValue | RO | mandatory |
column · TruthValue · read-only · mandatory Indicates whether Hellos are being suppressed to the neighbor | ||||
| CaxsOspfv3VirtNbrIfId | 1.3.6.1.4.1.21839.2.2.1.15.10.1.11 | Ipv6IfIndex | RO | mandatory |
column · Ipv6IfIndex · read-only · mandatory The interface ID that the neighbor advertises in its Hello Packets on this virtual link, that is, the neighbor's local interface index. | ||||
| TaxsOspfv3AreaAggregateTable | 1.3.6.1.4.1.21839.2.2.1.15.11 | NA | mandatory | |
table · not-accessible · mandatory A range of IPv6 prefixes specified by a prefix/prefix length pair. Note that if ranges are configured such that one range sub- sumes another range the most specific match is the preferred one. | ||||
| RaxsOspfv3AreaAggregateEntry | 1.3.6.1.4.1.21839.2.2.1.15.11.1 | NA | mandatory | |
row · not-accessible · mandatory A range of IPv6 prefixes specified by a prefix/prefix length pair. Note that if ranges are configured such that one range sub- sumes another range the most specific match is the preferred one. | ||||
| CaxsOspfv3AreaAggregateDomainNumber | 1.3.6.1.4.1.21839.2.2.1.15.11.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory ospfv3 domain number. | ||||
| CaxsOspfv3AreaAggregateAreaID | 1.3.6.1.4.1.21839.2.2.1.15.11.1.2 | AreaID | RO | mandatory |
column · AreaID · read-only · mandatory The Area the Address Aggregate is to be found within. | ||||
| CaxsOspfv3AreaAggregateAreaLsdbType | 1.3.6.1.4.1.21839.2.2.1.15.11.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The type of the Address Aggregate. This field specifies the Area Lsdb type that this Address Ag- gregate applies to.
| ||||
| CaxsOspfv3AreaAggregateIndex | 1.3.6.1.4.1.21839.2.2.1.15.11.1.4 | INTEGER (1..2147483647) | RO | mandatory |
column · INTEGER (1..2147483647) · read-only · mandatory A unique identifier for this aggregate table entry. | ||||
| CaxsOspfv3AreaAggregatePrefix | 1.3.6.1.4.1.21839.2.2.1.15.11.1.5 | Ipv6AddressPrefix | RO | mandatory |
column · Ipv6AddressPrefix · read-only · mandatory The IPv6 Prefix. | ||||
| CaxsOspfv3AreaAggregatePrefixLen | 1.3.6.1.4.1.21839.2.2.1.15.11.1.6 | INTEGER (3..128) | RO | mandatory |
column · INTEGER (3..128) · read-only · mandatory The length of the prefix (in bits). A prefix can not be shorter than 3 bits. | ||||
| CaxsOspfv3AreaAggregateStatus | 1.3.6.1.4.1.21839.2.2.1.15.11.1.7 | RowStatus | RO | mandatory |
column · RowStatus · read-only · mandatory This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent. | ||||
| CaxsOspfv3AreaAggregateEffect | 1.3.6.1.4.1.21839.2.2.1.15.11.1.8 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Prefixes subsumed by ranges either trigger the advertisement of the indicated aggregate (ad- vertiseMatching), or result in the prefix not being advertised at all outside the area.
| ||||
| NaxsUlr | 1.3.6.1.4.1.21839.2.2.1.20 | |||
| NaxsUlrGlobalInfo | 1.3.6.1.4.1.21839.2.2.1.20.1 | |||
| SaxsUlrVersion | 1.3.6.1.4.1.21839.2.2.1.20.1.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The version number of flash request packets transmit by the device. | ||||
| SaxsUlrID | 1.3.6.1.4.1.21839.2.2.1.20.1.2 | MacAddress | RO | mandatory |
scalar · MacAddress · read-only · mandatory Identifier of device. | ||||
| SaxsUlrConfigurationPortCounts | 1.3.6.1.4.1.21839.2.2.1.20.1.3 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of primary port and secondary port in device. | ||||
| SaxsUlrStartupActivePortSelection | 1.3.6.1.4.1.21839.2.2.1.20.1.4 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The configuration of startup active port selection. | ||||
| TaxsUlrPortTable | 1.3.6.1.4.1.21839.2.2.1.20.2 | NA | mandatory | |
table · not-accessible · mandatory A table containing uplink port information. | ||||
| RaxsUlrPortEntry | 1.3.6.1.4.1.21839.2.2.1.20.2.1 | NA | mandatory | |
| CaxsUlrPortIfIndex | 1.3.6.1.4.1.21839.2.2.1.20.2.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory IfIndex of the port. | ||||
| CaxsUlrPortType | 1.3.6.1.4.1.21839.2.2.1.20.2.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Type of port. 1) Primary 2) Secondary | ||||
| CaxsUlrPairedPortIfIndex | 1.3.6.1.4.1.21839.2.2.1.20.2.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory IfIndex of paired port. | ||||
| CaxsUlrPortStatus | 1.3.6.1.4.1.21839.2.2.1.20.2.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The state of port. 1) Forwarding 2) Down 3) Blocking
| ||||
| CaxsUlrPairedPortStatus | 1.3.6.1.4.1.21839.2.2.1.20.2.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The state of paired port. 1) Forwarding 2) Down 3) Blocking
| ||||
| CaxsUlrAutoChangeToPrimary | 1.3.6.1.4.1.21839.2.2.1.20.2.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The configuration of preemption. 1) Off 2) On
| ||||
| CaxsUlrAutoChangeToPrimaryDelay | 1.3.6.1.4.1.21839.2.2.1.20.2.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The Delay time of preemption. | ||||
| CaxsUlrAutoChangeToPrimaryRest | 1.3.6.1.4.1.21839.2.2.1.20.2.1.8 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The rest time of preemption. | ||||
| CaxsUlrStartupActivePortSelectionStatus | 1.3.6.1.4.1.21839.2.2.1.20.2.1.9 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The state of startup active port selection. 1) Off 2) On
| ||||
| CaxsUlrFlushTransmit | 1.3.6.1.4.1.21839.2.2.1.20.2.1.10 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The configuration of transmit flush-request frame. 1) Off 2) On
| ||||
| CaxsUlrFlushVlan | 1.3.6.1.4.1.21839.2.2.1.20.2.1.11 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The transmit VLAN ID in flush-request frame. 0 is not configuration. | ||||
| CaxsUlrMacAddressUpdateTransmit | 1.3.6.1.4.1.21839.2.2.1.20.2.1.12 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of transmit MAC Address update frame in one opportunity. | ||||
| CaxsUlrLastActivePortDecisionTime | 1.3.6.1.4.1.21839.2.2.1.20.2.1.13 | TimeStamp | RO | mandatory |
column · TimeStamp · read-only · mandatory Last determinate time of the active port. | ||||
| CaxsUlrLastFlushTransmitTime | 1.3.6.1.4.1.21839.2.2.1.20.2.1.14 | TimeStamp | RO | mandatory |
column · TimeStamp · read-only · mandatory Last transmit time of flush-request frame. | ||||
| CaxsUlrLastMacUpdateTransmitTime | 1.3.6.1.4.1.21839.2.2.1.20.2.1.15 | TimeStamp | RO | mandatory |
column · TimeStamp · read-only · mandatory Last transmit time of MAC Address update frame. | ||||
| CaxsUlrLastChangeFactor | 1.3.6.1.4.1.21839.2.2.1.20.2.1.16 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Last determinate factor of the active port. 1) command 2) configure 3) primary down 4) primary up 5) secondary down 6) secondary up 7) preemption
| ||||
| CaxsUlrFlushTransmitTotalPackets | 1.3.6.1.4.1.21839.2.2.1.20.2.1.17 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The total number of transmit flush-request frame in the port. | ||||
| CaxsUlrMacAddressUpdateTransmitTotalPackets | 1.3.6.1.4.1.21839.2.2.1.20.2.1.18 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The total number of transmit MAC Address update frame in the port. | ||||
| CaxsUlrMacAddressUpdateTransmitOverFlow | 1.3.6.1.4.1.21839.2.2.1.20.2.1.19 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The over flow number of MAC Address update frame. | ||||
| CaxsUlrActiveDecisionCount | 1.3.6.1.4.1.21839.2.2.1.20.2.1.20 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The determinate number of active port in uplink port. | ||||
| NaxsBootManagement | 1.3.6.1.4.1.21839.2.2.1.51 | |||
| SaxsBootReason | 1.3.6.1.4.1.21839.2.2.1.51.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Reason of system start.
| ||||
| NaxsLogin | 1.3.6.1.4.1.21839.2.2.1.52 | |||
| SaxsLoginName | 1.3.6.1.4.1.21839.2.2.1.52.1 | DisplayString | NA | mandatory |
scalar · DisplayString · not-accessible · mandatory Log in user name. | ||||
| SaxsLoginTime | 1.3.6.1.4.1.21839.2.2.1.52.2 | DisplayString | NA | mandatory |
scalar · DisplayString · not-accessible · mandatory Date, time and time zone of user log in.
Format : YYYY/MM/DD hh:mm:ss XXXXXX(time zone)
Time zone format :
JST : JST
GMT+09 : GMT + 09 hours
GMT+10 : GMT + 10 hours | ||||
| SaxsLogoutTime | 1.3.6.1.4.1.21839.2.2.1.52.3 | DisplayString | NA | mandatory |
scalar · DisplayString · not-accessible · mandatory Date, time and time zone of user log out. Format : YYYY/MM/DD hh:mm:ss XXXXXX(time zone) Time zone format : JST : JST GMT+09 : GMT + 09 hours GMT+10 : GMT + 10 hours | ||||
| SaxsLoginFailureTime | 1.3.6.1.4.1.21839.2.2.1.52.4 | DisplayString | NA | mandatory |
scalar · DisplayString · not-accessible · mandatory Date, time and time zone of user log in failure. Format : YYYY/MM/DD hh:mm:ss XXXXXX(time zone) Time zone format : JST : JST GMT+09 : GMT + 09 hours GMT+10 : GMT + 10 hours | ||||
| SaxsLoginLocation | 1.3.6.1.4.1.21839.2.2.1.52.5 | DisplayString | NA | mandatory |
scalar · DisplayString · not-accessible · mandatory Terminal information of log in user. The status will be 'console' or 'aux'. If other, displays 'TERMINAL(APLLICATION)'. ex. 'tty/1(telnet)' | ||||
| SaxsLoginLine | 1.3.6.1.4.1.21839.2.2.1.52.6 | DisplayString | NA | mandatory |
scalar · DisplayString · not-accessible · mandatory Connection information of log in user. The status will be 'console' or 'aux'. If other, displays 'IPADDRESS(APLLICATION)'. ex. '192.168.11.1(telnet)' | ||||
| SaxsLogoutStatus | 1.3.6.1.4.1.21839.2.2.1.52.7 | INTEGER | NA | mandatory |
scalar · INTEGER · not-accessible · mandatory Log out factor. error(1) : log out due to none of bellow success(2) : log out due to command timeout(3) : log out due to 'auto-logout' disconnect(4) : log out due to line disconnection force(5) : log out due to other user's command
| ||||
| Naxslldp | 1.3.6.1.4.1.21839.2.2.1.100 | |||
| NaxslldpConfiguration | 1.3.6.1.4.1.21839.2.2.1.100.1 | |||
| SaxslldpMessageTxInterval | 1.3.6.1.4.1.21839.2.2.1.100.1.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory LDPDU transmitting interval | ||||
| SaxslldpMessageTxHoldMultiplier | 1.3.6.1.4.1.21839.2.2.1.100.1.2 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Time coefficient for contiguity equipment to hold about the LLDP frame which this equipment transmitted | ||||
| TaxslldpPortConfigTable | 1.3.6.1.4.1.21839.2.2.1.100.1.6 | NA | mandatory | |
table · not-accessible · mandatory The table about LDPDU transmission | ||||
| RaxslldpPortConfigEntry | 1.3.6.1.4.1.21839.2.2.1.100.1.6.1 | NA | mandatory | |
| CaxslldpPortConfigPortNum | 1.3.6.1.4.1.21839.2.2.1.100.1.6.1.2 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory Port discernment index | ||||
| CaxslldpPortConfigAdminStatus | 1.3.6.1.4.1.21839.2.2.1.100.1.6.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The port state of this equipment about transmission and reception of LDPDU
| ||||
| CaxslldpPortConfigTLVsTxEnable | 1.3.6.1.4.1.21839.2.2.1.100.1.6.1.4 | Bits | RO | mandatory |
column · Bits · read-only · mandatory The TLV state about the port concerned which can be transmitted
| ||||
| CaxslldpPortConfigRowStatus | 1.3.6.1.4.1.21839.2.2.1.100.1.6.1.5 | RowStatus | RO | mandatory |
column · RowStatus · read-only · mandatory The state of this entry | ||||
| NaxslldpStats | 1.3.6.1.4.1.21839.2.2.1.100.2 | |||
| TaxslldpStatsTable | 1.3.6.1.4.1.21839.2.2.1.100.2.1 | NA | mandatory | |
table · not-accessible · mandatory The table about LLDP statistics information | ||||
| RaxslldpStatsEntry | 1.3.6.1.4.1.21839.2.2.1.100.2.1.1 | NA | mandatory | |
| CaxslldpStatsPortNum | 1.3.6.1.4.1.21839.2.2.1.100.2.1.1.2 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory Port discernment index | ||||
| CaxslldpStatsOperStatus | 1.3.6.1.4.1.21839.2.2.1.100.2.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The employment state about the port concerned | ||||
| CaxslldpStatsFramesInErrors | 1.3.6.1.4.1.21839.2.2.1.100.2.1.1.4 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The number of inaccurate LDPDU reception about the port concerned | ||||
| CaxslldpStatsFramesInTotal | 1.3.6.1.4.1.21839.2.2.1.100.2.1.1.5 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The total number of LDPDU reception about the port concerned | ||||
| CaxslldpStatsFramesOutTotal | 1.3.6.1.4.1.21839.2.2.1.100.2.1.1.6 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The total number of LDPDU transmission about the port concerned | ||||
| CaxslldpStatsTLVsInErrors | 1.3.6.1.4.1.21839.2.2.1.100.2.1.1.7 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The number of inaccurate TLV reception about the port concerned | ||||
| CaxslldpStatsTLVsDiscardedTotal | 1.3.6.1.4.1.21839.2.2.1.100.2.1.1.8 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory The total abandonment TLV number about the port concerned | ||||
| NaxslldpLocalSystemData | 1.3.6.1.4.1.21839.2.2.1.100.3 | |||
| SaxslldpLocChassisType | 1.3.6.1.4.1.21839.2.2.1.100.3.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The chassis type about this equipment
| ||||
| SaxslldpLocChassisId | 1.3.6.1.4.1.21839.2.2.1.100.3.2 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory The chassis ID about this equipment | ||||
| SaxslldpLocSysName | 1.3.6.1.4.1.21839.2.2.1.100.3.3 | OCTET STRING | RO | mandatory |
scalar · OCTET STRING · read-only · mandatory The chassis ID about this equipment | ||||
| SaxslldpLocSysDesc | 1.3.6.1.4.1.21839.2.2.1.100.3.4 | DisplayString | RO | mandatory |
scalar · DisplayString · read-only · mandatory System information about this equipment | ||||
| TaxslldpLocPortTable | 1.3.6.1.4.1.21839.2.2.1.100.3.7 | NA | mandatory | |
table · not-accessible · mandatory The table about the port of this equipment | ||||
| RaxslldpLocPortEntry | 1.3.6.1.4.1.21839.2.2.1.100.3.7.1 | NA | mandatory | |
| CaxslldpLocPortNum | 1.3.6.1.4.1.21839.2.2.1.100.3.7.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory Port discernment index | ||||
| CaxslldpLocPortType | 1.3.6.1.4.1.21839.2.2.1.100.3.7.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The port type about the port concerned of this equipment
| ||||
| CaxslldpLocPortId | 1.3.6.1.4.1.21839.2.2.1.100.3.7.1.3 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory The port ID about the port concerned of this equipment | ||||
| CaxslldpLocPortDesc | 1.3.6.1.4.1.21839.2.2.1.100.3.7.1.4 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Port information about the port concerned of this equipment | ||||
| NaxslldpRemoteSystemData | 1.3.6.1.4.1.21839.2.2.1.100.4 | |||
| TaxslldpRemTable | 1.3.6.1.4.1.21839.2.2.1.100.4.1 | NA | mandatory | |
table · not-accessible · mandatory The table about contiguity equipment | ||||
| RaxslldpRemEntry | 1.3.6.1.4.1.21839.2.2.1.100.4.1.1 | NA | mandatory | |
row · not-accessible · mandatory The entry about contiguity equipment | ||||
| CaxslldpRemLocalPortNum | 1.3.6.1.4.1.21839.2.2.1.100.4.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The discernment index of the port of this equipment which received the information about contiguity equipment | ||||
| CaxslldpRemIndex | 1.3.6.1.4.1.21839.2.2.1.100.4.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The index about contiguity equipment | ||||
| CaxslldpRemRemoteChassisType | 1.3.6.1.4.1.21839.2.2.1.100.4.1.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The chassis type about contiguity equipment
| ||||
| CaxslldpRemRemoteChassis | 1.3.6.1.4.1.21839.2.2.1.100.4.1.1.5 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory The chassis ID about contiguity equipment | ||||
| CaxslldpRemRemotePortType | 1.3.6.1.4.1.21839.2.2.1.100.4.1.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The port type about the port concerned of contiguity equipment
| ||||
| CaxslldpRemRemotePort | 1.3.6.1.4.1.21839.2.2.1.100.4.1.1.7 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory The port ID about the port concerned of contiguity equipment | ||||
| CaxslldpRemPortDesc | 1.3.6.1.4.1.21839.2.2.1.100.4.1.1.8 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory Information about the port concerned of contiguity equipment | ||||
| CaxslldpRemSysName | 1.3.6.1.4.1.21839.2.2.1.100.4.1.1.9 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory The system name about contiguity equipment | ||||
| CaxslldpRemSysDesc | 1.3.6.1.4.1.21839.2.2.1.100.4.1.1.10 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory System information about contiguity equipment | ||||
| NaxslldpRemoteOriginInfoData | 1.3.6.1.4.1.21839.2.2.1.100.20 | |||
| TaxslldpRemOriginInfoTable | 1.3.6.1.4.1.21839.2.2.1.100.20.1 | NA | mandatory | |
table · not-accessible · mandatory The table about original with AlaxalA networks TLV of contiguity equipment | ||||
| RaxslldpRemOriginInfoEntry | 1.3.6.1.4.1.21839.2.2.1.100.20.1.1 | NA | mandatory | |
row · not-accessible · mandatory The entry about original with AlaxalA networks TLV of contiguity equipment | ||||
| CaxslldpRemOriginInfoPortNum | 1.3.6.1.4.1.21839.2.2.1.100.20.1.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory The discernment index of the port of this equipment which received the information about contiguity equipment. | ||||
| CaxslldpRemOriginInfoIndex | 1.3.6.1.4.1.21839.2.2.1.100.20.1.1.2 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory The index about contiguity equipment | ||||
| CaxslldpRemOriginInfoLowerVlanList | 1.3.6.1.4.1.21839.2.2.1.100.20.1.1.3 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory What expressed effective VLAN ID by the bit map by VLAN 1-2047 in the port concerned of contiguity equipment | ||||
| CaxslldpRemOriginInfoHigherVlanList | 1.3.6.1.4.1.21839.2.2.1.100.20.1.1.4 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory What expressed effective VLAN ID by the bit map by VLAN 2048-4095 in the port concerned of contiguity equipment | ||||
| CaxslldpRemOriginInfoIPv4Address | 1.3.6.1.4.1.21839.2.2.1.100.20.1.1.5 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory IPv4 address given to the port concerned of contiguity equipment | ||||
| CaxslldpRemOriginInfoIPv4PortType | 1.3.6.1.4.1.21839.2.2.1.100.20.1.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Port classification of the port of contiguity equipment concerned | ||||
| CaxslldpRemOriginInfoIPv4VlanId | 1.3.6.1.4.1.21839.2.2.1.100.20.1.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The smallest thing among VLAN ID to which IPv4 address is given | ||||
| CaxslldpRemOriginInfoIPv6Address | 1.3.6.1.4.1.21839.2.2.1.100.20.1.1.8 | OCTET STRING | RO | mandatory |
column · OCTET STRING · read-only · mandatory The IPv6 address given to the port concerned of contiguity equipment | ||||
| CaxslldpRemOriginInfoIPv6PortType | 1.3.6.1.4.1.21839.2.2.1.100.20.1.1.9 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Port classification of the port of contiguity equipment concerned | ||||
| CaxslldpRemOriginInfoIPv6VlanId | 1.3.6.1.4.1.21839.2.2.1.100.20.1.1.10 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The smallest thing among VLAN ID to which the IPv6 address is given | ||||
| NaxsAxrp | 1.3.6.1.4.1.21839.2.2.1.200 | |||
| TaxsAxrpGroupTable | 1.3.6.1.4.1.21839.2.2.1.200.1 | NA | mandatory | |
table · not-accessible · mandatory The table containing AXRP group information. | ||||
| RaxsAxrpGroupEntry | 1.3.6.1.4.1.21839.2.2.1.200.1.1 | NA | mandatory | |
| CaxsAxrpGroupRingId | 1.3.6.1.4.1.21839.2.2.1.200.1.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory AXRP group ring identifier. | ||||
| CaxsAxrpGroupRowStatus | 1.3.6.1.4.1.21839.2.2.1.200.1.1.2 | RowStatus | RO | mandatory |
column · RowStatus · read-only · mandatory Valid/Invalid state of this entry. Valid(1) fixed | ||||
| CaxsAxrpGroupMode | 1.3.6.1.4.1.21839.2.2.1.200.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Operation mode of each ring ID.
| ||||
| CaxsAxrpGroupRingAttribute | 1.3.6.1.4.1.21839.2.2.1.200.1.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory When the multi ring is composed, it is an attribute of this device in the common link non-watch ring.
| ||||
| CaxsAxrpGroupMonitoringState | 1.3.6.1.4.1.21839.2.2.1.200.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Operation and state of watch of ring.
| ||||
| CaxsAxrpGroupRingport1 | 1.3.6.1.4.1.21839.2.2.1.200.1.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory IfIndex of ring port 1 (port in one where Ifindex is small) | ||||
| CaxsAxrpGroupRingport1Shared | 1.3.6.1.4.1.21839.2.2.1.200.1.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Ring port 1 is common port information.
| ||||
| CaxsAxrpGroupRingport2 | 1.3.6.1.4.1.21839.2.2.1.200.1.1.8 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory IfIndex of ring port 2 (port in one where Ifindex is large) | ||||
| CaxsAxrpGroupRingport2Shared | 1.3.6.1.4.1.21839.2.2.1.200.1.1.9 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Ring port 2 is common port information.
| ||||
| CaxsAxrpGroupTransitionToFaultCounts | 1.3.6.1.4.1.21839.2.2.1.200.1.1.10 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory Frequency that shifts from state of trouble watch in state of restoration watch. | ||||
| CaxsAxrpGroupTransitionToNormalCounts | 1.3.6.1.4.1.21839.2.2.1.200.1.1.11 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory Frequency that shifts from state of restoration watch in state of trouble watch. | ||||
| CaxsAxrpGroupLastTransitionTime | 1.3.6.1.4.1.21839.2.2.1.200.1.1.12 | TimeStamp | RO | mandatory |
column · TimeStamp · read-only · mandatory It is changing the final time to restoration from the trouble or the trouble from restoration. | ||||
| CaxsAxrpGroupLinkStatusAlert | 1.3.6.1.4.1.21839.2.2.1.200.1.1.13 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory State of each ring ID of link trouble detection.
| ||||
| CaxsAxrpGroupRingport1LinkKeepaliveSend | 1.3.6.1.4.1.21839.2.2.1.200.1.1.14 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory State of transmission of link trouble watch frame of ring port 1.
| ||||
| CaxsAxrpGroupRingport1LinkKeepaliveMonitor | 1.3.6.1.4.1.21839.2.2.1.200.1.1.15 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory State of link trouble watch of ring port 1.
| ||||
| CaxsAxrpGroupRingport1LinkState | 1.3.6.1.4.1.21839.2.2.1.200.1.1.16 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory State of link of ring port 1.
| ||||
| CaxsAxrpGroupRingport1LinkKeepaliveReceiveCounts | 1.3.6.1.4.1.21839.2.2.1.200.1.1.17 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory Number of reception frames of link state watch frames of ring port 1. | ||||
| CaxsAxrpGroupRingport2LinkKeepaliveSend | 1.3.6.1.4.1.21839.2.2.1.200.1.1.18 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory State of transmission of link trouble watch frame of ring port 2.
| ||||
| CaxsAxrpGroupRingport2LinkKeepaliveMonitor | 1.3.6.1.4.1.21839.2.2.1.200.1.1.19 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory State of link trouble watch of ring port 2.
| ||||
| CaxsAxrpGroupRingport2LinkState | 1.3.6.1.4.1.21839.2.2.1.200.1.1.20 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory State of link of ring port 2.
| ||||
| CaxsAxrpGroupRingport2LinkKeepaliveReceiveCounts | 1.3.6.1.4.1.21839.2.2.1.200.1.1.21 | Counter32 | RO | mandatory |
column · Counter32 · read-only · mandatory Number of reception frames of link state watch frames of ring port 2. | ||||
| CaxsAxrpGroupMultiFaultDetectionState | 1.3.6.1.4.1.21839.2.2.1.200.1.1.22 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Operation and state of multiple fault detection of ring.
| ||||
| TaxsAxrpVlanGroupTable | 1.3.6.1.4.1.21839.2.2.1.200.2 | NA | mandatory | |
table · not-accessible · mandatory The table containing AXRP VLAN group information. | ||||
| RaxsAxrpVlanGroupEntry | 1.3.6.1.4.1.21839.2.2.1.200.2.1 | NA | mandatory | |
row · not-accessible · mandatory The list of AXRP VLAN group information. | ||||
| CaxsAxrpVlanGroupRingId | 1.3.6.1.4.1.21839.2.2.1.200.2.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory AXRP VLAN ring group number(1~8) | ||||
| CaxsAxrpVlanGroupId | 1.3.6.1.4.1.21839.2.2.1.200.2.1.2 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory AXRP VLAN group number(1~8) | ||||
| CaxsAxrpVlanGroupRingport1 | 1.3.6.1.4.1.21839.2.2.1.200.2.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory IfIndex of ring port 1 (port in one where Ifindex is small) | ||||
| CaxsAxrpVlanGroupRingport1Role | 1.3.6.1.4.1.21839.2.2.1.200.2.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Role of ring port 1
| ||||
| CaxsAxrpVlanGroupRingport1OperState | 1.3.6.1.4.1.21839.2.2.1.200.2.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Present of ring port 1
| ||||
| CaxsAxrpVlanGroupRingport2 | 1.3.6.1.4.1.21839.2.2.1.200.2.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory IfIndex of ring port 2 (port in one where Ifindex is small) | ||||
| CaxsAxrpVlanGroupRingport2Role | 1.3.6.1.4.1.21839.2.2.1.200.2.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Role of ring port 2
| ||||
| CaxsAxrpVlanGroupRingport2OperState | 1.3.6.1.4.1.21839.2.2.1.200.2.1.8 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Present of ring port 2
| ||||
| NaxsPconMIB | 1.3.6.1.4.1.21839.2.2.1.300 | |||
| NaxsPconObjects | 1.3.6.1.4.1.21839.2.2.1.300.1 | |||
| NaxsPconModuleData | 1.3.6.1.4.1.21839.2.2.1.300.1.1 | |||
| TaxsPconModuleTable | 1.3.6.1.4.1.21839.2.2.1.300.1.1.1 | NA | mandatory | |
table · not-accessible · mandatory A table containing electric power control information of module. | ||||
| RaxsPconModuleEntry | 1.3.6.1.4.1.21839.2.2.1.300.1.1.1.1 | NA | mandatory | |
row · not-accessible · mandatory An entry containing electric power control information of module.
| ||||
| CaxsPconModuleIndex | 1.3.6.1.4.1.21839.2.2.1.300.1.1.1.1.1 | Integer32 (1..2147483647) | NA | mandatory |
column · Integer32 (1..2147483647) · not-accessible · mandatory A unique value for each module contained by the network device. | ||||
| CaxsPconModuleType | 1.3.6.1.4.1.21839.2.2.1.300.1.1.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory An indication of the type of module.
| ||||
| CaxsPconModuleSlotNo | 1.3.6.1.4.1.21839.2.2.1.300.1.1.1.1.3 | Integer32 | RO | mandatory |
column · Integer32 · read-only · mandatory Position information of the module slots. | ||||
| CaxsPconModuleDescr | 1.3.6.1.4.1.21839.2.2.1.300.1.1.1.1.4 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory The textual description of module. | ||||
| CaxsPconModuleStatus | 1.3.6.1.4.1.21839.2.2.1.300.1.1.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The module status of this axsPconModuleEntry.
| ||||
| CaxsPconModuleMode | 1.3.6.1.4.1.21839.2.2.1.300.1.1.1.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The module mode of this axsPconModuleEntry.
| ||||
| NaxsPconPowerCon | 1.3.6.1.4.1.21839.2.2.1.300.1.2 | |||
| TaxsPconPowerConTable | 1.3.6.1.4.1.21839.2.2.1.300.1.2.1 | NA | mandatory | |
table · not-accessible · mandatory The power consumption information table. | ||||
| RaxsPconPowerConEntry | 1.3.6.1.4.1.21839.2.2.1.300.1.2.1.1 | NA | mandatory | |
| CaxsPconPowerConMaxPower | 1.3.6.1.4.1.21839.2.2.1.300.1.2.1.1.1 | Gauge32 | RO | mandatory |
column · Gauge32 · read-only · mandatory The maximum electric power of module. | ||||
| CaxsPconPowerConPowerConsumption | 1.3.6.1.4.1.21839.2.2.1.300.1.2.1.1.2 | Counter64 | RO | mandatory |
column · Counter64 · read-only · mandatory The power consumption of module. | ||||
| CaxsPconPowerConPowerMeter | 1.3.6.1.4.1.21839.2.2.1.300.1.2.1.1.3 | Gauge32 | RO | mandatory |
column · Gauge32 · read-only · mandatory The power meter of module. | ||||
| NaxsPconTraffic | 1.3.6.1.4.1.21839.2.2.1.300.1.3 | |||
| TaxsPconTrafficTable | 1.3.6.1.4.1.21839.2.2.1.300.1.3.1 | NA | mandatory | |
table · not-accessible · mandatory The Traffic information table. | ||||
| RaxsPconTrafficEntry | 1.3.6.1.4.1.21839.2.2.1.300.1.3.1.1 | NA | mandatory | |
| CaxsPconTrafficMaxTransferCapacity | 1.3.6.1.4.1.21839.2.2.1.300.1.3.1.1.1 | Gauge32 | RO | mandatory |
column · Gauge32 · read-only · mandatory The maximum transfer capacity. | ||||
| CaxsPconTrafficTotalTransferCapacity | 1.3.6.1.4.1.21839.2.2.1.300.1.3.1.1.2 | Gauge32 | RO | mandatory |
column · Gauge32 · read-only · mandatory The total transfer capacity. | ||||
| CaxsPconTrafficInOctets | 1.3.6.1.4.1.21839.2.2.1.300.1.3.1.1.3 | Counter64 | RO | mandatory |
column · Counter64 · read-only · mandatory The total number of octets that received on this module. | ||||
| CaxsPconTrafficOutOctets | 1.3.6.1.4.1.21839.2.2.1.300.1.3.1.1.4 | Counter64 | RO | mandatory |
column · Counter64 · read-only · mandatory The total number of octets transmitted out from this module. | ||||
| CaxsPconTrafficInPkts | 1.3.6.1.4.1.21839.2.2.1.300.1.3.1.1.5 | Counter64 | RO | mandatory |
column · Counter64 · read-only · mandatory The total number of packets that received on this module. | ||||
| CaxsPconTrafficOutPkts | 1.3.6.1.4.1.21839.2.2.1.300.1.3.1.1.6 | Counter64 | RO | mandatory |
column · Counter64 · read-only · mandatory The total number of packets transmitted out from this module. | ||||
| CaxsPconTrafficCapacityOctets | 1.3.6.1.4.1.21839.2.2.1.300.1.3.1.1.7 | Counter64 | RO | mandatory |
column · Counter64 · read-only · mandatory The accumulation octets capacity that can be received on this module. | ||||
| CaxsPconTrafficInPeakOctetsRate | 1.3.6.1.4.1.21839.2.2.1.300.1.3.1.1.8 | Gauge32 | RO | mandatory |
column · Gauge32 · read-only · mandatory The peak rate of octets that received on this module. | ||||
| CaxsPconTrafficPeakTransferCapacity | 1.3.6.1.4.1.21839.2.2.1.300.1.3.1.1.9 | Gauge32 | RO | mandatory |
column · Gauge32 · read-only · mandatory The rate of margin when incoming traffic is peak. | ||||
| CaxsPconTrafficInDiscPkts | 1.3.6.1.4.1.21839.2.2.1.300.1.3.1.1.10 | Counter64 | RO | mandatory |
column · Counter64 · read-only · mandatory The total number of discarded packets on this module. | ||||
| Nax1240sMib | 1.3.6.1.4.1.21839.2.2.13 | |||
| Nax1240sSwitch | 1.3.6.1.4.1.21839.2.2.13.1 | |||
| Sax1240sModelType | 1.3.6.1.4.1.21839.2.2.13.1.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Model type of this system.
| ||||
| Nax1240sSoftware | 1.3.6.1.4.1.21839.2.2.13.1.2 | |||
| Sax1240sSoftwareName | 1.3.6.1.4.1.21839.2.2.13.1.2.1 | DisplayString (SIZE (0..16)) | RO | mandatory |
scalar · DisplayString (SIZE (0..16)) · read-only · mandatory Software name of this system. | ||||
| Sax1240sSoftwareAbbreviation | 1.3.6.1.4.1.21839.2.2.13.1.2.2 | DisplayString (SIZE (0..16)) | RO | mandatory |
scalar · DisplayString (SIZE (0..16)) · read-only · mandatory System software abbreviation. | ||||
| Sax1240sSoftwareVersion | 1.3.6.1.4.1.21839.2.2.13.1.2.3 | DisplayString (SIZE (0..16)) | RO | mandatory |
scalar · DisplayString (SIZE (0..16)) · read-only · mandatory System software version. | ||||
| Nax1240sSystemMsg | 1.3.6.1.4.1.21839.2.2.13.1.3 | |||
| Sax1240sSystemMsgText | 1.3.6.1.4.1.21839.2.2.13.1.3.1 | DisplayString (SIZE (0..256)) | RO | mandatory |
scalar · DisplayString (SIZE (0..256)) · read-only · mandatory The text of the system log message.For information about this code, see: Operator's Manual. | ||||
| Sax1240sSystemMsgType | 1.3.6.1.4.1.21839.2.2.13.1.3.2 | OCTET STRING (SIZE (1)) | RO | mandatory |
scalar · OCTET STRING (SIZE (1)) · read-only · mandatory The event type. For information about this code, see: Operator's Manual. | ||||
| Sax1240sSystemMsgTimeStamp | 1.3.6.1.4.1.21839.2.2.13.1.3.3 | DisplayString (SIZE (0..14)) | RO | mandatory |
scalar · DisplayString (SIZE (0..14)) · read-only · mandatory The time that event occured. And that is expressed as type of MM/DD hh:mm:ss MM:month(01-12) DD:day(01-31) hh:hour(00-23) mm:minute(00-59) ss:second(00-59) Insert space between DD and hh. | ||||
| Sax1240sSystemMsgLevel | 1.3.6.1.4.1.21839.2.2.13.1.3.4 | OCTET STRING (SIZE (1)) | RO | mandatory |
scalar · OCTET STRING (SIZE (1)) · read-only · mandatory The newest system message log level.For information about this code, see: Operator's Manual. | ||||
| Sax1240sSystemMsgEventPoint | 1.3.6.1.4.1.21839.2.2.13.1.3.5 | DisplayString (SIZE (0..8)) | RO | mandatory |
scalar · DisplayString (SIZE (0..8)) · read-only · mandatory The code of part that system message error occured. For information about this code,see: Operator's Manual. | ||||
| Sax1240sSystemMsgEventInterfaceID | 1.3.6.1.4.1.21839.2.2.13.1.3.6 | DisplayString (SIZE (0..40)) | RO | mandatory |
scalar · DisplayString (SIZE (0..40)) · read-only · mandatory Interface identification of system messages. For information about this code,see: Operator's Manual. | ||||
| Sax1240sSystemMsgEventCode | 1.3.6.1.4.1.21839.2.2.13.1.3.7 | OCTET STRING (SIZE (4)) | RO | mandatory |
scalar · OCTET STRING (SIZE (4)) · read-only · mandatory Event kind code of system messages. For information about this code, see: Operator's Manual. | ||||
| Sax1240sSystemMsgAdditionalCode | 1.3.6.1.4.1.21839.2.2.13.1.3.8 | OCTET STRING (SIZE (6)) | RO | mandatory |
scalar · OCTET STRING (SIZE (6)) · read-only · mandatory Additional code of system messages. For information about this code, see: Operator's Manual. | ||||
| Nax1240sSnmpAgent | 1.3.6.1.4.1.21839.2.2.13.1.4 | |||
| Sax1240sSnmpSendReceiveSize | 1.3.6.1.4.1.21839.2.2.13.1.4.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory SNMP packet data size in Manager-to-Agent communication. The value is displayed in bytes. | ||||
| Sax1240sSnmpReceiveDelay | 1.3.6.1.4.1.21839.2.2.13.1.4.2 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory A recommendable interval to receive packets from Manager.The value is displayed in milliseconds. | ||||
| Sax1240sSnmpContinuousSend | 1.3.6.1.4.1.21839.2.2.13.1.4.3 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Number of times that is recommendable continuous transmission packets. | ||||
| Sax1240sSnmpObjectMaxNumber | 1.3.6.1.4.1.21839.2.2.13.1.4.4 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Max number of objects that contain SNMP packet. | ||||
| Nax1240sLicense | 1.3.6.1.4.1.21839.2.2.13.1.6 | |||
| Sax1240sLicenseNumber | 1.3.6.1.4.1.21839.2.2.13.1.6.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of the configured license serial numbers. | ||||
| Tax1240sLicenseTable | 1.3.6.1.4.1.21839.2.2.13.1.6.2 | NA | mandatory | |
table · not-accessible · mandatory The table containing the license information. | ||||
| Rax1240sLicenseEntry | 1.3.6.1.4.1.21839.2.2.13.1.6.2.1 | NA | mandatory | |
| Cax1240sLicenseIndex | 1.3.6.1.4.1.21839.2.2.13.1.6.2.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory The unique index number given for each serial number. The number is from 1 to ax1240sLicenseNumber. | ||||
| Cax1240sLicenseSerialNumber | 1.3.6.1.4.1.21839.2.2.13.1.6.2.1.2 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory The serial number. | ||||
| Cax1240sLicenseOptionNumber | 1.3.6.1.4.1.21839.2.2.13.1.6.2.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of option licenses associated with the serial number. | ||||
| Tax1240sLicenseOptionTable | 1.3.6.1.4.1.21839.2.2.13.1.6.3 | NA | mandatory | |
table · not-accessible · mandatory The table containing option licenses information associated with the serial number. | ||||
| Rax1240sLicenseOptionEntry | 1.3.6.1.4.1.21839.2.2.13.1.6.3.1 | NA | mandatory | |
row · not-accessible · mandatory The entry of the option license information associated with the serial number. | ||||
| Cax1240sLicenseOptionIndex | 1.3.6.1.4.1.21839.2.2.13.1.6.3.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory The unique index number given for each serial number. The same number as ax1240sLicenseIndex. | ||||
| Cax1240sLicenseOptionNumberIndex | 1.3.6.1.4.1.21839.2.2.13.1.6.3.1.2 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory The unique index number of option licenses information which is given for each serial number. The number is from 1 to ax1240sLicenseNumber. | ||||
| Cax1240sLicenseOptionSoftwareName | 1.3.6.1.4.1.21839.2.2.13.1.6.3.1.3 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory The software model name of the option license information associated with the serial number. | ||||
| Cax1240sLicenseOptionSoftwareAbbreviation | 1.3.6.1.4.1.21839.2.2.13.1.6.3.1.4 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory The software abbreviated name of the option license information associated with the serial number. | ||||
| Nax1240sDevice | 1.3.6.1.4.1.21839.2.2.13.2 | |||
| Nax1240sChassis | 1.3.6.1.4.1.21839.2.2.13.2.1 | |||
| Sax1240sChassisMaxNumber | 1.3.6.1.4.1.21839.2.2.13.2.1.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Max number of cluster chassis that can connect to this router. | ||||
| Tax1240sChassisTable | 1.3.6.1.4.1.21839.2.2.13.2.1.2 | NA | mandatory | |
table · not-accessible · mandatory A table containing chassis information. | ||||
| Rax1240sChassisEntry | 1.3.6.1.4.1.21839.2.2.13.2.1.2.1 | NA | mandatory | |
| Cax1240sChassisIndex | 1.3.6.1.4.1.21839.2.2.13.2.1.2.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory A number to specify ax1240sChassisEntry. | ||||
| Cax1240sChassisType | 1.3.6.1.4.1.21839.2.2.13.2.1.2.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Chassis type of this system.
| ||||
| Cax1240sChassisStatus | 1.3.6.1.4.1.21839.2.2.13.2.1.2.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Current status of this chassis.
| ||||
| Cax1240sStsLedStatus | 1.3.6.1.4.1.21839.2.2.13.2.1.2.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The state of STS LED of the device is shown.
| ||||
| Cax1240sCpuName | 1.3.6.1.4.1.21839.2.2.13.2.1.2.1.5 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory CPU name is shown by the character string of 16 characters or less. | ||||
| Cax1240sCpuClock | 1.3.6.1.4.1.21839.2.2.13.2.1.2.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory CPU clock is shown by the numerical value. | ||||
| Cax1240sMemoryTotalSize | 1.3.6.1.4.1.21839.2.2.13.2.1.2.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The installing memory size is shown by the numerical value. | ||||
| Cax1240sMemoryUsedSize | 1.3.6.1.4.1.21839.2.2.13.2.1.2.1.8 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The use memory size is shown by the numerical value. | ||||
| Cax1240sMemoryFreeSize | 1.3.6.1.4.1.21839.2.2.13.2.1.2.1.9 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The unused memory size is shown by the numerical value. | ||||
| Cax1240sRomVersion | 1.3.6.1.4.1.21839.2.2.13.2.1.2.1.10 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory The version of ROM equipped with BCU is shown by the character string. | ||||
| Cax1240sCpuLoad1m | 1.3.6.1.4.1.21839.2.2.13.2.1.2.1.11 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory CPU utilization of one minute is shown by the numerical value. | ||||
| Cax1240sFlashTotalSize | 1.3.6.1.4.1.21839.2.2.13.2.1.2.1.12 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The total of filesystem use capacity and unused capacity in a built-in memory is shown. | ||||
| Cax1240sFlashUsedSize | 1.3.6.1.4.1.21839.2.2.13.2.1.2.1.13 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The use capacity of the filesystem in a built-in memory is shown. | ||||
| Cax1240sFlashFreeSize | 1.3.6.1.4.1.21839.2.2.13.2.1.2.1.14 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The unused capacity of the filesystem in a built-in memory is shown. | ||||
| Cax1240sSdCardStatus | 1.3.6.1.4.1.21839.2.2.13.2.1.2.1.15 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The SD card connection is shown.
| ||||
| Cax1240sSdCardTotalSize | 1.3.6.1.4.1.21839.2.2.13.2.1.2.1.16 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Total capacity of the SD card is shown by the numerical value. It responds by -1 at the MC card unconnection. | ||||
| Cax1240sSdCardUsedSize | 1.3.6.1.4.1.21839.2.2.13.2.1.2.1.17 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The use capacity of the SD card is shown by the numerical value. It responds by -1 at the SD card unconnection. | ||||
| Cax1240sSdCardFreeSize | 1.3.6.1.4.1.21839.2.2.13.2.1.2.1.18 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The remainder capacity of the SD card is shown by the numerical value. It responds by -1 at the SD card unconnection. | ||||
| Cax1240sPhysLineNumber | 1.3.6.1.4.1.21839.2.2.13.2.1.2.1.19 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Number of physical lines. | ||||
| Cax1240sTemperatureStatusNumber | 1.3.6.1.4.1.21839.2.2.13.2.1.2.1.20 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The maximum number of ax1240sTemperatureStatus in this chassis. | ||||
| Cax1240sPowerUnitNumber | 1.3.6.1.4.1.21839.2.2.13.2.1.2.1.21 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Number of maximum power switches that this router can connect its. | ||||
| Cax1240sRedundantPsNumber | 1.3.6.1.4.1.21839.2.2.13.2.1.2.1.22 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Number of external power switches that this router can connect its. | ||||
| Cax1240sFanNumber | 1.3.6.1.4.1.21839.2.2.13.2.1.2.1.23 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The maximum number of fans that can connect to this chassis. | ||||
| Cax1240sTotalAccumRunTime | 1.3.6.1.4.1.21839.2.2.13.2.1.2.1.24 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Total operation time after operation of device begins. | ||||
| Cax1240sCriticalAccumRunTime | 1.3.6.1.4.1.21839.2.2.13.2.1.2.1.25 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Operating time in critical environmental temperature. | ||||
| Tax1240sTemperatureStatusTable | 1.3.6.1.4.1.21839.2.2.13.2.1.3 | NA | mandatory | |
table · not-accessible · mandatory The table of ambient temperature status maintained by the environmental monitor. | ||||
| Rax1240sTemperatureStatusEntry | 1.3.6.1.4.1.21839.2.2.13.2.1.3.1 | NA | mandatory | |
row · not-accessible · mandatory An entry in the ambient temperature status table, representing the status of the associated testpoint maintained by the environmental monitor. | ||||
| Cax1240sTemperatureStatusIndex | 1.3.6.1.4.1.21839.2.2.13.2.1.3.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory Unique index for the testpoint being instrumented. This index is for SNMP purposes only, and has no intrinsic meaning. | ||||
| Cax1240sTemperatureStatusDescr | 1.3.6.1.4.1.21839.2.2.13.2.1.3.1.2 | DisplayString (SIZE (0..32)) | RO | mandatory |
column · DisplayString (SIZE (0..32)) · read-only · mandatory Textual description of the testpoint being instrumented. This description is a short textual label, suitable as a human-sensible identification for the rest of the information in the entry. | ||||
| Cax1240sTemperatureStatusValue | 1.3.6.1.4.1.21839.2.2.13.2.1.3.1.3 | Integer32 | RO | mandatory |
column · Integer32 · read-only · mandatory The current measurement of the testpoint being instrumented. | ||||
| Cax1240sTemperatureThreshold | 1.3.6.1.4.1.21839.2.2.13.2.1.3.1.4 | Integer32 | RO | mandatory |
column · Integer32 · read-only · mandatory The highest value that the associated instance of the object ax1240sTemperatureStatusValue may obtain before an emergency shutdown of the managed device is initiated. | ||||
| Cax1240sTemperatureState | 1.3.6.1.4.1.21839.2.2.13.2.1.3.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The current state of the testpoint being instrumented.
| ||||
| Tax1240sPowerUnitTable | 1.3.6.1.4.1.21839.2.2.13.2.1.4 | NA | mandatory | |
table · not-accessible · mandatory A table containing power unit information. | ||||
| Rax1240sPowerUnitEntry | 1.3.6.1.4.1.21839.2.2.13.2.1.4.1 | NA | mandatory | |
row · not-accessible · mandatory An entry containing power unit information. | ||||
| Cax1240sPowerUnitIndex | 1.3.6.1.4.1.21839.2.2.13.2.1.4.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory A number to position of the power units.The value from 1 to ax1240sPowerUnitNumber. | ||||
| Cax1240sPowerConnectStatus | 1.3.6.1.4.1.21839.2.2.13.2.1.4.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The current connection status of the power unit.
| ||||
| Cax1240sPowerSupplyStatus | 1.3.6.1.4.1.21839.2.2.13.2.1.4.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Status of power supply.
| ||||
| Tax1240sFanTable | 1.3.6.1.4.1.21839.2.2.13.2.1.5 | NA | mandatory | |
table · not-accessible · mandatory A table containing fan information. | ||||
| Rax1240sFanEntry | 1.3.6.1.4.1.21839.2.2.13.2.1.5.1 | NA | mandatory | |
row · not-accessible · mandatory This entry containing information for a fan. | ||||
| Cax1240sFanIndex | 1.3.6.1.4.1.21839.2.2.13.2.1.5.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory Index to indicate position of fans. | ||||
| Cax1240sFanStatus | 1.3.6.1.4.1.21839.2.2.13.2.1.5.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Status of fans.
| ||||
| Tax1240sRedundantPsTable | 1.3.6.1.4.1.21839.2.2.13.2.1.6 | NA | mandatory | |
table · not-accessible · mandatory A table containing external power supply information. | ||||
| Rax1240sRedundantPsEntry | 1.3.6.1.4.1.21839.2.2.13.2.1.6.1 | NA | mandatory | |
row · not-accessible · mandatory An entry containing external power supply information. | ||||
| Cax1240sRedundantPsIndex | 1.3.6.1.4.1.21839.2.2.13.2.1.6.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory An index that shows the external power supply position. | ||||
| Cax1240sRedundantPsConnectStatus | 1.3.6.1.4.1.21839.2.2.13.2.1.6.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Mounting an external power supply is shown.
| ||||
| Cax1240sRedundantPsStatus | 1.3.6.1.4.1.21839.2.2.13.2.1.6.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The operation of an external power supply is shown.
| ||||
| Nax1240sPhysLine | 1.3.6.1.4.1.21839.2.2.13.2.2 | |||
| Tax1240sPhysLineTable | 1.3.6.1.4.1.21839.2.2.13.2.2.1 | NA | mandatory | |
table · not-accessible · mandatory A table containing physical port information. | ||||
| Rax1240sPhysLineEntry | 1.3.6.1.4.1.21839.2.2.13.2.2.1.1 | NA | mandatory | |
row · not-accessible · mandatory An entry containing physical port. | ||||
| Cax1240sPhysLineIndex | 1.3.6.1.4.1.21839.2.2.13.2.2.1.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory Physical port number. The value is from 1 to ax1240sNifLineNumber. | ||||
| Cax1240sPhysLineConnectorType | 1.3.6.1.4.1.21839.2.2.13.2.2.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Connector type is connected physical port. The value is 1(other) when connector is disconnected or connector type is unknown.When displaying in pannel, requests board name of NIF,then will display it. The value is -1 when PSU or NIF board is disconnected.
| ||||
| Cax1240sPhysLineOperStatus | 1.3.6.1.4.1.21839.2.2.13.2.2.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Status of physical port. The value is -1 when PSU or NIF board is disconnected.
| ||||
| Cax1240sPhysLineIfIndexNumber | 1.3.6.1.4.1.21839.2.2.13.2.2.1.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Number of ifIndex which is included in physical port.The value is -1 when PSU board or NIF board is disconnected. | ||||
| Cax1240sPhysLineTransceiverStatus | 1.3.6.1.4.1.21839.2.2.13.2.2.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Type and status of replaceable transceiver.
| ||||
| Nax1240sDeviceError | 1.3.6.1.4.1.21839.2.2.13.2.3 | |||
| Sax1240sMemoryError | 1.3.6.1.4.1.21839.2.2.13.2.3.1 | INTEGER | NA | mandatory |
scalar · INTEGER · not-accessible · mandatory Information about device error.
| ||||
| Nax1240sManagementMIB | 1.3.6.1.4.1.21839.2.2.13.3 | |||
| Nax1240sOperationCommand | 1.3.6.1.4.1.21839.2.2.13.3.1 | |||
| Nax1240sFdbClearMIB | 1.3.6.1.4.1.21839.2.2.13.3.1.1 | |||
| Sax1240sFdbClearSet | 1.3.6.1.4.1.21839.2.2.13.3.1.1.1 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Fdb clear information. When want to clear fdb, then set value of this MIB as 1.
| ||||
| Sax1240sFdbClearReqTime | 1.3.6.1.4.1.21839.2.2.13.3.1.1.2 | TimeTicks | RO | mandatory |
scalar · TimeTicks · read-only · mandatory This object indicates the most recent time that received the demand to clear Fdb information.(sysUpTime) | ||||
| Sax1240sFdbClearSuccessTime | 1.3.6.1.4.1.21839.2.2.13.3.1.1.3 | TimeTicks | RO | mandatory |
scalar · TimeTicks · read-only · mandatory This object indicates the time of the most recent Fdb clearing success.(sysUpTime) | ||||
| Nax1240sAuth | 1.3.6.1.4.1.21839.2.2.13.10 | |||
| Nax1240sAuthInfo | 1.3.6.1.4.1.21839.2.2.13.10.1 | |||
| Nax1240sDot1x | 1.3.6.1.4.1.21839.2.2.13.10.2 | |||
| Nax1240sWauth | 1.3.6.1.4.1.21839.2.2.13.10.3 | |||
| Nax1240sMauth | 1.3.6.1.4.1.21839.2.2.13.10.4 | |||
| Nax1250sMib | 1.3.6.1.4.1.21839.2.2.14 | |||
| Nax1250sSwitch | 1.3.6.1.4.1.21839.2.2.14.1 | |||
| Sax1250sModelType | 1.3.6.1.4.1.21839.2.2.14.1.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Model type of this system.
| ||||
| Nax1250sSoftware | 1.3.6.1.4.1.21839.2.2.14.1.2 | |||
| Sax1250sSoftwareName | 1.3.6.1.4.1.21839.2.2.14.1.2.1 | DisplayString (SIZE (0..16)) | RO | mandatory |
scalar · DisplayString (SIZE (0..16)) · read-only · mandatory Software name of this system. | ||||
| Sax1250sSoftwareAbbreviation | 1.3.6.1.4.1.21839.2.2.14.1.2.2 | DisplayString (SIZE (0..16)) | RO | mandatory |
scalar · DisplayString (SIZE (0..16)) · read-only · mandatory System software abbreviation. | ||||
| Sax1250sSoftwareVersion | 1.3.6.1.4.1.21839.2.2.14.1.2.3 | DisplayString (SIZE (0..16)) | RO | mandatory |
scalar · DisplayString (SIZE (0..16)) · read-only · mandatory System software version. | ||||
| Nax1250sSystemMsg | 1.3.6.1.4.1.21839.2.2.14.1.3 | |||
| Sax1250sSystemMsgText | 1.3.6.1.4.1.21839.2.2.14.1.3.1 | DisplayString (SIZE (0..256)) | RO | mandatory |
scalar · DisplayString (SIZE (0..256)) · read-only · mandatory The text of the system log message.For information about this code, see: Operator's Manual. | ||||
| Sax1250sSystemMsgType | 1.3.6.1.4.1.21839.2.2.14.1.3.2 | OCTET STRING (SIZE (1)) | RO | mandatory |
scalar · OCTET STRING (SIZE (1)) · read-only · mandatory The event type. For information about this code, see: Operator's Manual. | ||||
| Sax1250sSystemMsgTimeStamp | 1.3.6.1.4.1.21839.2.2.14.1.3.3 | DisplayString (SIZE (0..14)) | RO | mandatory |
scalar · DisplayString (SIZE (0..14)) · read-only · mandatory The time that event occured. And that is expressed as type of MM/DD hh:mm:ss MM:month(01-12) DD:day(01-31) hh:hour(00-23) mm:minute(00-59) ss:second(00-59) Insert space between DD and hh. | ||||
| Sax1250sSystemMsgLevel | 1.3.6.1.4.1.21839.2.2.14.1.3.4 | OCTET STRING (SIZE (1)) | RO | mandatory |
scalar · OCTET STRING (SIZE (1)) · read-only · mandatory The newest system message log level.For information about this code, see: Operator's Manual. | ||||
| Sax1250sSystemMsgEventPoint | 1.3.6.1.4.1.21839.2.2.14.1.3.5 | DisplayString (SIZE (0..8)) | RO | mandatory |
scalar · DisplayString (SIZE (0..8)) · read-only · mandatory The code of part that system message error occured. For information about this code,see: Operator's Manual. | ||||
| Sax1250sSystemMsgEventInterfaceID | 1.3.6.1.4.1.21839.2.2.14.1.3.6 | DisplayString (SIZE (0..40)) | RO | mandatory |
scalar · DisplayString (SIZE (0..40)) · read-only · mandatory Interface identification of system messages. For information about this code,see: Operator's Manual. | ||||
| Sax1250sSystemMsgEventCode | 1.3.6.1.4.1.21839.2.2.14.1.3.7 | OCTET STRING (SIZE (4)) | RO | mandatory |
scalar · OCTET STRING (SIZE (4)) · read-only · mandatory Event kind code of system messages. For information about this code, see: Operator's Manual. | ||||
| Sax1250sSystemMsgAdditionalCode | 1.3.6.1.4.1.21839.2.2.14.1.3.8 | OCTET STRING (SIZE (6)) | RO | mandatory |
scalar · OCTET STRING (SIZE (6)) · read-only · mandatory Additional code of system messages. For information about this code, see: Operator's Manual. | ||||
| Nax1250sSnmpAgent | 1.3.6.1.4.1.21839.2.2.14.1.4 | |||
| Sax1250sSnmpSendReceiveSize | 1.3.6.1.4.1.21839.2.2.14.1.4.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory SNMP packet data size in Manager-to-Agent communication. The value is displayed in bytes. | ||||
| Sax1250sSnmpReceiveDelay | 1.3.6.1.4.1.21839.2.2.14.1.4.2 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory A recommendable interval to receive packets from Manager.The value is displayed in milliseconds. | ||||
| Sax1250sSnmpContinuousSend | 1.3.6.1.4.1.21839.2.2.14.1.4.3 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Number of times that is recommendable continuous transmission packets. | ||||
| Sax1250sSnmpObjectMaxNumber | 1.3.6.1.4.1.21839.2.2.14.1.4.4 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Max number of objects that contain SNMP packet. | ||||
| Nax1250sLicense | 1.3.6.1.4.1.21839.2.2.14.1.6 | |||
| Sax1250sLicenseNumber | 1.3.6.1.4.1.21839.2.2.14.1.6.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of the configured license serial numbers. | ||||
| Tax1250sLicenseTable | 1.3.6.1.4.1.21839.2.2.14.1.6.2 | NA | mandatory | |
table · not-accessible · mandatory The table containing the license information. | ||||
| Rax1250sLicenseEntry | 1.3.6.1.4.1.21839.2.2.14.1.6.2.1 | NA | mandatory | |
| Cax1250sLicenseIndex | 1.3.6.1.4.1.21839.2.2.14.1.6.2.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory The unique index number given for each serial number. The number is from 1 to ax1250sLicenseNumber. | ||||
| Cax1250sLicenseSerialNumber | 1.3.6.1.4.1.21839.2.2.14.1.6.2.1.2 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory The serial number. | ||||
| Cax1250sLicenseOptionNumber | 1.3.6.1.4.1.21839.2.2.14.1.6.2.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of option licenses associated with the serial number. | ||||
| Tax1250sLicenseOptionTable | 1.3.6.1.4.1.21839.2.2.14.1.6.3 | NA | mandatory | |
table · not-accessible · mandatory The table containing option licenses information associated with the serial number. | ||||
| Rax1250sLicenseOptionEntry | 1.3.6.1.4.1.21839.2.2.14.1.6.3.1 | NA | mandatory | |
row · not-accessible · mandatory The entry of the option license information associated with the serial number. | ||||
| Cax1250sLicenseOptionIndex | 1.3.6.1.4.1.21839.2.2.14.1.6.3.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory The unique index number given for each serial number. The same number as ax1250sLicenseIndex. | ||||
| Cax1250sLicenseOptionNumberIndex | 1.3.6.1.4.1.21839.2.2.14.1.6.3.1.2 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory The unique index number of option licenses information which is given for each serial number. The number is from 1 to ax1250sLicenseNumber. | ||||
| Cax1250sLicenseOptionSoftwareName | 1.3.6.1.4.1.21839.2.2.14.1.6.3.1.3 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory The software model name of the option license information associated with the serial number. | ||||
| Cax1250sLicenseOptionSoftwareAbbreviation | 1.3.6.1.4.1.21839.2.2.14.1.6.3.1.4 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory The software abbreviated name of the option license information associated with the serial number. | ||||
| Nax1250sDevice | 1.3.6.1.4.1.21839.2.2.14.2 | |||
| Nax1250sChassis | 1.3.6.1.4.1.21839.2.2.14.2.1 | |||
| Sax1250sChassisMaxNumber | 1.3.6.1.4.1.21839.2.2.14.2.1.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Max number of cluster chassis that can connect to this router. | ||||
| Tax1250sChassisTable | 1.3.6.1.4.1.21839.2.2.14.2.1.2 | NA | mandatory | |
table · not-accessible · mandatory A table containing chassis information. | ||||
| Rax1250sChassisEntry | 1.3.6.1.4.1.21839.2.2.14.2.1.2.1 | NA | mandatory | |
| Cax1250sChassisIndex | 1.3.6.1.4.1.21839.2.2.14.2.1.2.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory A number to specify ax1250sChassisEntry. | ||||
| Cax1250sChassisType | 1.3.6.1.4.1.21839.2.2.14.2.1.2.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Chassis type of this system.
| ||||
| Cax1250sChassisStatus | 1.3.6.1.4.1.21839.2.2.14.2.1.2.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Current status of this chassis.
| ||||
| Cax1250sStsLedStatus | 1.3.6.1.4.1.21839.2.2.14.2.1.2.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The state of STS LED of the device is shown.
| ||||
| Cax1250sCpuName | 1.3.6.1.4.1.21839.2.2.14.2.1.2.1.5 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory CPU name is shown by the character string of 16 characters or less. | ||||
| Cax1250sCpuClock | 1.3.6.1.4.1.21839.2.2.14.2.1.2.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory CPU clock is shown by the numerical value. | ||||
| Cax1250sMemoryTotalSize | 1.3.6.1.4.1.21839.2.2.14.2.1.2.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The installing memory size is shown by the numerical value. | ||||
| Cax1250sMemoryUsedSize | 1.3.6.1.4.1.21839.2.2.14.2.1.2.1.8 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The use memory size is shown by the numerical value. | ||||
| Cax1250sMemoryFreeSize | 1.3.6.1.4.1.21839.2.2.14.2.1.2.1.9 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The unused memory size is shown by the numerical value. | ||||
| Cax1250sRomVersion | 1.3.6.1.4.1.21839.2.2.14.2.1.2.1.10 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory The version of ROM equipped with BCU is shown by the character string. | ||||
| Cax1250sCpuLoad1m | 1.3.6.1.4.1.21839.2.2.14.2.1.2.1.11 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory CPU utilization of one minute is shown by the numerical value. | ||||
| Cax1250sFlashTotalSize | 1.3.6.1.4.1.21839.2.2.14.2.1.2.1.12 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The total of filesystem use capacity and unused capacity in a built-in memory is shown. | ||||
| Cax1250sFlashUsedSize | 1.3.6.1.4.1.21839.2.2.14.2.1.2.1.13 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The use capacity of the filesystem in a built-in memory is shown. | ||||
| Cax1250sFlashFreeSize | 1.3.6.1.4.1.21839.2.2.14.2.1.2.1.14 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The unused capacity of the filesystem in a built-in memory is shown. | ||||
| Cax1250sSdCardStatus | 1.3.6.1.4.1.21839.2.2.14.2.1.2.1.15 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The SD card connection is shown.
| ||||
| Cax1250sSdCardTotalSize | 1.3.6.1.4.1.21839.2.2.14.2.1.2.1.16 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Total capacity of the SD card is shown by the numerical value. It responds by -1 at the MC card unconnection. | ||||
| Cax1250sSdCardUsedSize | 1.3.6.1.4.1.21839.2.2.14.2.1.2.1.17 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The use capacity of the SD card is shown by the numerical value. It responds by -1 at the SD card unconnection. | ||||
| Cax1250sSdCardFreeSize | 1.3.6.1.4.1.21839.2.2.14.2.1.2.1.18 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The remainder capacity of the SD card is shown by the numerical value. It responds by -1 at the SD card unconnection. | ||||
| Cax1250sPhysLineNumber | 1.3.6.1.4.1.21839.2.2.14.2.1.2.1.19 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Number of physical lines. | ||||
| Cax1250sTemperatureStatusNumber | 1.3.6.1.4.1.21839.2.2.14.2.1.2.1.20 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The maximum number of ax1250sTemperatureStatus in this chassis. | ||||
| Cax1250sPowerUnitNumber | 1.3.6.1.4.1.21839.2.2.14.2.1.2.1.21 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Number of maximum power switches that this router can connect its. | ||||
| Cax1250sRedundantPsNumber | 1.3.6.1.4.1.21839.2.2.14.2.1.2.1.22 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Number of external power switches that this router can connect its. | ||||
| Cax1250sFanNumber | 1.3.6.1.4.1.21839.2.2.14.2.1.2.1.23 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The maximum number of fans that can connect to this chassis. | ||||
| Cax1250sTotalAccumRunTime | 1.3.6.1.4.1.21839.2.2.14.2.1.2.1.24 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Total operation time after operation of device begins. | ||||
| Cax1250sCriticalAccumRunTime | 1.3.6.1.4.1.21839.2.2.14.2.1.2.1.25 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Operating time in critical environmental temperature. | ||||
| Tax1250sTemperatureStatusTable | 1.3.6.1.4.1.21839.2.2.14.2.1.3 | NA | mandatory | |
table · not-accessible · mandatory The table of ambient temperature status maintained by the environmental monitor. | ||||
| Rax1250sTemperatureStatusEntry | 1.3.6.1.4.1.21839.2.2.14.2.1.3.1 | NA | mandatory | |
row · not-accessible · mandatory An entry in the ambient temperature status table, representing the status of the associated testpoint maintained by the environmental monitor. | ||||
| Cax1250sTemperatureStatusIndex | 1.3.6.1.4.1.21839.2.2.14.2.1.3.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory Unique index for the testpoint being instrumented. This index is for SNMP purposes only, and has no intrinsic meaning. | ||||
| Cax1250sTemperatureStatusDescr | 1.3.6.1.4.1.21839.2.2.14.2.1.3.1.2 | DisplayString (SIZE (0..32)) | RO | mandatory |
column · DisplayString (SIZE (0..32)) · read-only · mandatory Textual description of the testpoint being instrumented. This description is a short textual label, suitable as a human-sensible identification for the rest of the information in the entry. | ||||
| Cax1250sTemperatureStatusValue | 1.3.6.1.4.1.21839.2.2.14.2.1.3.1.3 | Integer32 | RO | mandatory |
column · Integer32 · read-only · mandatory The current measurement of the testpoint being instrumented. | ||||
| Cax1250sTemperatureThreshold | 1.3.6.1.4.1.21839.2.2.14.2.1.3.1.4 | Integer32 | RO | mandatory |
column · Integer32 · read-only · mandatory The highest value that the associated instance of the object ax1250sTemperatureStatusValue may obtain before an emergency shutdown of the managed device is initiated. | ||||
| Cax1250sTemperatureState | 1.3.6.1.4.1.21839.2.2.14.2.1.3.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The current state of the testpoint being instrumented.
| ||||
| Tax1250sPowerUnitTable | 1.3.6.1.4.1.21839.2.2.14.2.1.4 | NA | mandatory | |
table · not-accessible · mandatory A table containing power unit information. | ||||
| Rax1250sPowerUnitEntry | 1.3.6.1.4.1.21839.2.2.14.2.1.4.1 | NA | mandatory | |
row · not-accessible · mandatory An entry containing power unit information. | ||||
| Cax1250sPowerUnitIndex | 1.3.6.1.4.1.21839.2.2.14.2.1.4.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory A number to position of the power units.The value from 1 to ax1250sPowerUnitNumber. | ||||
| Cax1250sPowerConnectStatus | 1.3.6.1.4.1.21839.2.2.14.2.1.4.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The current connection status of the power unit.
| ||||
| Cax1250sPowerSupplyStatus | 1.3.6.1.4.1.21839.2.2.14.2.1.4.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Status of power supply.
| ||||
| Tax1250sFanTable | 1.3.6.1.4.1.21839.2.2.14.2.1.5 | NA | mandatory | |
table · not-accessible · mandatory A table containing fan information. | ||||
| Rax1250sFanEntry | 1.3.6.1.4.1.21839.2.2.14.2.1.5.1 | NA | mandatory | |
row · not-accessible · mandatory This entry containing information for a fan. | ||||
| Cax1250sFanIndex | 1.3.6.1.4.1.21839.2.2.14.2.1.5.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory Index to indicate position of fans. | ||||
| Cax1250sFanStatus | 1.3.6.1.4.1.21839.2.2.14.2.1.5.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Status of fans.
| ||||
| Tax1250sRedundantPsTable | 1.3.6.1.4.1.21839.2.2.14.2.1.6 | NA | mandatory | |
table · not-accessible · mandatory A table containing external power supply information. | ||||
| Rax1250sRedundantPsEntry | 1.3.6.1.4.1.21839.2.2.14.2.1.6.1 | NA | mandatory | |
row · not-accessible · mandatory An entry containing external power supply information. | ||||
| Cax1250sRedundantPsIndex | 1.3.6.1.4.1.21839.2.2.14.2.1.6.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory An index that shows the external power supply position. | ||||
| Cax1250sRedundantPsConnectStatus | 1.3.6.1.4.1.21839.2.2.14.2.1.6.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Mounting an external power supply is shown.
| ||||
| Cax1250sRedundantPsStatus | 1.3.6.1.4.1.21839.2.2.14.2.1.6.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The operation of an external power supply is shown.
| ||||
| Nax1250sPhysLine | 1.3.6.1.4.1.21839.2.2.14.2.2 | |||
| Tax1250sPhysLineTable | 1.3.6.1.4.1.21839.2.2.14.2.2.1 | NA | mandatory | |
table · not-accessible · mandatory A table containing physical port information. | ||||
| Rax1250sPhysLineEntry | 1.3.6.1.4.1.21839.2.2.14.2.2.1.1 | NA | mandatory | |
row · not-accessible · mandatory An entry containing physical port. | ||||
| Cax1250sPhysLineIndex | 1.3.6.1.4.1.21839.2.2.14.2.2.1.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory Physical port number. The value is from 1 to ax1250sNifLineNumber. | ||||
| Cax1250sPhysLineConnectorType | 1.3.6.1.4.1.21839.2.2.14.2.2.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Connector type is connected physical port. The value is 1(other) when connector is disconnected or connector type is unknown.When displaying in pannel, requests board name of NIF,then will display it. The value is -1 when PSU or NIF board is disconnected.
| ||||
| Cax1250sPhysLineOperStatus | 1.3.6.1.4.1.21839.2.2.14.2.2.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Status of physical port. The value is -1 when PSU or NIF board is disconnected.
| ||||
| Cax1250sPhysLineIfIndexNumber | 1.3.6.1.4.1.21839.2.2.14.2.2.1.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Number of ifIndex which is included in physical port.The value is -1 when PSU board or NIF board is disconnected. | ||||
| Cax1250sPhysLineTransceiverStatus | 1.3.6.1.4.1.21839.2.2.14.2.2.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Type and status of replaceable transceiver.
| ||||
| Nax1250sDeviceError | 1.3.6.1.4.1.21839.2.2.14.2.3 | |||
| Sax1250sMemoryError | 1.3.6.1.4.1.21839.2.2.14.2.3.1 | INTEGER | NA | mandatory |
scalar · INTEGER · not-accessible · mandatory Information about device error.
| ||||
| Nax1250sManagementMIB | 1.3.6.1.4.1.21839.2.2.14.3 | |||
| Nax1250sOperationCommand | 1.3.6.1.4.1.21839.2.2.14.3.1 | |||
| Nax1250sFdbClearMIB | 1.3.6.1.4.1.21839.2.2.14.3.1.1 | |||
| Sax1250sFdbClearSet | 1.3.6.1.4.1.21839.2.2.14.3.1.1.1 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Fdb clear information. When want to clear fdb, then set value of this MIB as 1.
| ||||
| Sax1250sFdbClearReqTime | 1.3.6.1.4.1.21839.2.2.14.3.1.1.2 | TimeTicks | RO | mandatory |
scalar · TimeTicks · read-only · mandatory This object indicates the most recent time that received the demand to clear Fdb information.(sysUpTime) | ||||
| Sax1250sFdbClearSuccessTime | 1.3.6.1.4.1.21839.2.2.14.3.1.1.3 | TimeTicks | RO | mandatory |
scalar · TimeTicks · read-only · mandatory This object indicates the time of the most recent Fdb clearing success.(sysUpTime) | ||||
| Nax1250sAuth | 1.3.6.1.4.1.21839.2.2.14.10 | |||
| Nax1250sAuthInfo | 1.3.6.1.4.1.21839.2.2.14.10.1 | |||
| Nax1250sDot1x | 1.3.6.1.4.1.21839.2.2.14.10.2 | |||
| Nax1250sWauth | 1.3.6.1.4.1.21839.2.2.14.10.3 | |||
| Nax1250sMauth | 1.3.6.1.4.1.21839.2.2.14.10.4 | |||
| Nax2230sMib | 1.3.6.1.4.1.21839.2.2.18 | |||
| Nax2230sSwitch | 1.3.6.1.4.1.21839.2.2.18.1 | |||
| Sax2230sModelType | 1.3.6.1.4.1.21839.2.2.18.1.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Model type of this system.
| ||||
| Nax2230sSoftware | 1.3.6.1.4.1.21839.2.2.18.1.2 | |||
| Sax2230sSoftwareName | 1.3.6.1.4.1.21839.2.2.18.1.2.1 | DisplayString (SIZE (0..16)) | RO | mandatory |
scalar · DisplayString (SIZE (0..16)) · read-only · mandatory Software name of this system. | ||||
| Sax2230sSoftwareAbbreviation | 1.3.6.1.4.1.21839.2.2.18.1.2.2 | DisplayString (SIZE (0..16)) | RO | mandatory |
scalar · DisplayString (SIZE (0..16)) · read-only · mandatory System software abbreviation. | ||||
| Sax2230sSoftwareVersion | 1.3.6.1.4.1.21839.2.2.18.1.2.3 | DisplayString (SIZE (0..16)) | RO | mandatory |
scalar · DisplayString (SIZE (0..16)) · read-only · mandatory System software version. | ||||
| Nax2230sSystemMsg | 1.3.6.1.4.1.21839.2.2.18.1.3 | |||
| Sax2230sSystemMsgText | 1.3.6.1.4.1.21839.2.2.18.1.3.1 | DisplayString (SIZE (0..256)) | RO | mandatory |
scalar · DisplayString (SIZE (0..256)) · read-only · mandatory The text of the system log message.For information about this code, see: Operator's Manual. | ||||
| Sax2230sSystemMsgType | 1.3.6.1.4.1.21839.2.2.18.1.3.2 | OCTET STRING (SIZE (1)) | RO | mandatory |
scalar · OCTET STRING (SIZE (1)) · read-only · mandatory The event type. For information about this code, see: Operator's Manual. | ||||
| Sax2230sSystemMsgTimeStamp | 1.3.6.1.4.1.21839.2.2.18.1.3.3 | DisplayString (SIZE (0..14)) | RO | mandatory |
scalar · DisplayString (SIZE (0..14)) · read-only · mandatory The time that event occured. And that is expressed as type of MM/DD hh:mm:ss MM:month(01-12) DD:day(01-31) hh:hour(00-23) mm:minute(00-59) ss:second(00-59) Insert space between DD and hh. | ||||
| Sax2230sSystemMsgLevel | 1.3.6.1.4.1.21839.2.2.18.1.3.4 | OCTET STRING (SIZE (1)) | RO | mandatory |
scalar · OCTET STRING (SIZE (1)) · read-only · mandatory The newest system message log level.For information about this code, see: Operator's Manual. | ||||
| Sax2230sSystemMsgEventPoint | 1.3.6.1.4.1.21839.2.2.18.1.3.5 | DisplayString (SIZE (0..8)) | RO | mandatory |
scalar · DisplayString (SIZE (0..8)) · read-only · mandatory The code of part that system message error occured. For information about this code,see: Operator's Manual. | ||||
| Sax2230sSystemMsgEventInterfaceID | 1.3.6.1.4.1.21839.2.2.18.1.3.6 | DisplayString (SIZE (0..40)) | RO | mandatory |
scalar · DisplayString (SIZE (0..40)) · read-only · mandatory Interface identification of system messages. For information about this code,see: Operator's Manual. | ||||
| Sax2230sSystemMsgEventCode | 1.3.6.1.4.1.21839.2.2.18.1.3.7 | OCTET STRING (SIZE (4)) | RO | mandatory |
scalar · OCTET STRING (SIZE (4)) · read-only · mandatory Event kind code of system messages. For information about this code, see: Operator's Manual. | ||||
| Sax2230sSystemMsgAdditionalCode | 1.3.6.1.4.1.21839.2.2.18.1.3.8 | OCTET STRING (SIZE (6)) | RO | mandatory |
scalar · OCTET STRING (SIZE (6)) · read-only · mandatory Additional code of system messages. For information about this code, see: Operator's Manual. | ||||
| Nax2230sSnmpAgent | 1.3.6.1.4.1.21839.2.2.18.1.4 | |||
| Sax2230sSnmpSendReceiveSize | 1.3.6.1.4.1.21839.2.2.18.1.4.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory SNMP packet data size in Manager-to-Agent communication. The value is displayed in bytes. | ||||
| Sax2230sSnmpReceiveDelay | 1.3.6.1.4.1.21839.2.2.18.1.4.2 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory A recommendable interval to receive packets from Manager.The value is displayed in milliseconds. | ||||
| Sax2230sSnmpContinuousSend | 1.3.6.1.4.1.21839.2.2.18.1.4.3 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Number of times that is recommendable continuous transmission packets. | ||||
| Sax2230sSnmpObjectMaxNumber | 1.3.6.1.4.1.21839.2.2.18.1.4.4 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Max number of objects that contain SNMP packet. | ||||
| Nax2230sLicense | 1.3.6.1.4.1.21839.2.2.18.1.6 | |||
| Sax2230sLicenseNumber | 1.3.6.1.4.1.21839.2.2.18.1.6.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of the configured license serial numbers. | ||||
| Tax2230sLicenseTable | 1.3.6.1.4.1.21839.2.2.18.1.6.2 | NA | mandatory | |
table · not-accessible · mandatory The table containing the license information. | ||||
| Rax2230sLicenseEntry | 1.3.6.1.4.1.21839.2.2.18.1.6.2.1 | NA | mandatory | |
| Cax2230sLicenseIndex | 1.3.6.1.4.1.21839.2.2.18.1.6.2.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory The unique index number given for each serial number. The number is from 1 to ax2230sLicenseNumber. | ||||
| Cax2230sLicenseSerialNumber | 1.3.6.1.4.1.21839.2.2.18.1.6.2.1.2 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory The serial number. | ||||
| Cax2230sLicenseOptionNumber | 1.3.6.1.4.1.21839.2.2.18.1.6.2.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of option licenses associated with the serial number. | ||||
| Tax2230sLicenseOptionTable | 1.3.6.1.4.1.21839.2.2.18.1.6.3 | NA | mandatory | |
table · not-accessible · mandatory The table containing option licenses information associated with the serial number. | ||||
| Rax2230sLicenseOptionEntry | 1.3.6.1.4.1.21839.2.2.18.1.6.3.1 | NA | mandatory | |
row · not-accessible · mandatory The entry of the option license information associated with the serial number. | ||||
| Cax2230sLicenseOptionIndex | 1.3.6.1.4.1.21839.2.2.18.1.6.3.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory The unique index number given for each serial number. The same number as ax2230sLicenseIndex. | ||||
| Cax2230sLicenseOptionNumberIndex | 1.3.6.1.4.1.21839.2.2.18.1.6.3.1.2 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory The unique index number of option licenses information which is given for each serial number. The number is from 1 to ax2230sLicenseNumber. | ||||
| Cax2230sLicenseOptionSoftwareName | 1.3.6.1.4.1.21839.2.2.18.1.6.3.1.3 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory The software model name of the option license information associated with the serial number. | ||||
| Cax2230sLicenseOptionSoftwareAbbreviation | 1.3.6.1.4.1.21839.2.2.18.1.6.3.1.4 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory The software abbreviated name of the option license information associated with the serial number. | ||||
| Nax2230sDevice | 1.3.6.1.4.1.21839.2.2.18.2 | |||
| Nax2230sChassis | 1.3.6.1.4.1.21839.2.2.18.2.1 | |||
| Sax2230sChassisMaxNumber | 1.3.6.1.4.1.21839.2.2.18.2.1.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Max number of cluster chassis that can connect to this router. | ||||
| Tax2230sChassisTable | 1.3.6.1.4.1.21839.2.2.18.2.1.2 | NA | mandatory | |
table · not-accessible · mandatory A table containing chassis information. | ||||
| Rax2230sChassisEntry | 1.3.6.1.4.1.21839.2.2.18.2.1.2.1 | NA | mandatory | |
| Cax2230sChassisIndex | 1.3.6.1.4.1.21839.2.2.18.2.1.2.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory A number to specify ax2230sChassisEntry. | ||||
| Cax2230sChassisType | 1.3.6.1.4.1.21839.2.2.18.2.1.2.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Chassis type of this system.
| ||||
| Cax2230sChassisStatus | 1.3.6.1.4.1.21839.2.2.18.2.1.2.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Current status of this chassis.
| ||||
| Cax2230sStsLedStatus | 1.3.6.1.4.1.21839.2.2.18.2.1.2.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The state of STS LED of the device is shown.
| ||||
| Cax2230sCpuName | 1.3.6.1.4.1.21839.2.2.18.2.1.2.1.5 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory CPU name is shown by the character string of 16 characters or less. | ||||
| Cax2230sCpuClock | 1.3.6.1.4.1.21839.2.2.18.2.1.2.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory CPU clock is shown by the numerical value. | ||||
| Cax2230sMemoryTotalSize | 1.3.6.1.4.1.21839.2.2.18.2.1.2.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The installing memory size is shown by the numerical value. | ||||
| Cax2230sMemoryUsedSize | 1.3.6.1.4.1.21839.2.2.18.2.1.2.1.8 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The use memory size is shown by the numerical value. | ||||
| Cax2230sMemoryFreeSize | 1.3.6.1.4.1.21839.2.2.18.2.1.2.1.9 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The unused memory size is shown by the numerical value. | ||||
| Cax2230sRomVersion | 1.3.6.1.4.1.21839.2.2.18.2.1.2.1.10 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory The version of ROM equipped with BCU is shown by the character string. | ||||
| Cax2230sCpuLoad1m | 1.3.6.1.4.1.21839.2.2.18.2.1.2.1.11 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory CPU utilization of one minute is shown by the numerical value. | ||||
| Cax2230sFlashTotalSize | 1.3.6.1.4.1.21839.2.2.18.2.1.2.1.12 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The total of filesystem use capacity and unused capacity in a built-in memory is shown. | ||||
| Cax2230sFlashUsedSize | 1.3.6.1.4.1.21839.2.2.18.2.1.2.1.13 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The use capacity of the filesystem in a built-in memory is shown. | ||||
| Cax2230sFlashFreeSize | 1.3.6.1.4.1.21839.2.2.18.2.1.2.1.14 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The unused capacity of the filesystem in a built-in memory is shown. | ||||
| Cax2230sSdCardStatus | 1.3.6.1.4.1.21839.2.2.18.2.1.2.1.15 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The SD card connection is shown.
| ||||
| Cax2230sSdCardTotalSize | 1.3.6.1.4.1.21839.2.2.18.2.1.2.1.16 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Total capacity of the SD card is shown by the numerical value. It responds by -1 at the MC card unconnection. | ||||
| Cax2230sSdCardUsedSize | 1.3.6.1.4.1.21839.2.2.18.2.1.2.1.17 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The use capacity of the SD card is shown by the numerical value. It responds by -1 at the SD card unconnection. | ||||
| Cax2230sSdCardFreeSize | 1.3.6.1.4.1.21839.2.2.18.2.1.2.1.18 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The remainder capacity of the SD card is shown by the numerical value. It responds by -1 at the SD card unconnection. | ||||
| Cax2230sPhysLineNumber | 1.3.6.1.4.1.21839.2.2.18.2.1.2.1.19 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Number of physical lines. | ||||
| Cax2230sTemperatureStatusNumber | 1.3.6.1.4.1.21839.2.2.18.2.1.2.1.20 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The maximum number of ax2230sTemperatureStatus in this chassis. | ||||
| Cax2230sPowerUnitNumber | 1.3.6.1.4.1.21839.2.2.18.2.1.2.1.21 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Number of maximum power switches that this router can connect its. | ||||
| Cax2230sRedundantPsNumber | 1.3.6.1.4.1.21839.2.2.18.2.1.2.1.22 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Number of external power switches that this router can connect its. | ||||
| Cax2230sFanNumber | 1.3.6.1.4.1.21839.2.2.18.2.1.2.1.23 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The maximum number of fans that can connect to this chassis. | ||||
| Cax2230sTotalAccumRunTime | 1.3.6.1.4.1.21839.2.2.18.2.1.2.1.24 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Total operation time after operation of device begins. | ||||
| Cax2230sCriticalAccumRunTime | 1.3.6.1.4.1.21839.2.2.18.2.1.2.1.25 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Operating time in critical environmental temperature. | ||||
| Tax2230sTemperatureStatusTable | 1.3.6.1.4.1.21839.2.2.18.2.1.3 | NA | mandatory | |
table · not-accessible · mandatory The table of ambient temperature status maintained by the environmental monitor. | ||||
| Rax2230sTemperatureStatusEntry | 1.3.6.1.4.1.21839.2.2.18.2.1.3.1 | NA | mandatory | |
row · not-accessible · mandatory An entry in the ambient temperature status table, representing the status of the associated testpoint maintained by the environmental monitor. | ||||
| Cax2230sTemperatureStatusIndex | 1.3.6.1.4.1.21839.2.2.18.2.1.3.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory Unique index for the testpoint being instrumented. This index is for SNMP purposes only, and has no intrinsic meaning. | ||||
| Cax2230sTemperatureStatusDescr | 1.3.6.1.4.1.21839.2.2.18.2.1.3.1.2 | DisplayString (SIZE (0..32)) | RO | mandatory |
column · DisplayString (SIZE (0..32)) · read-only · mandatory Textual description of the testpoint being instrumented. This description is a short textual label, suitable as a human-sensible identification for the rest of the information in the entry. | ||||
| Cax2230sTemperatureStatusValue | 1.3.6.1.4.1.21839.2.2.18.2.1.3.1.3 | Integer32 | RO | mandatory |
column · Integer32 · read-only · mandatory The current measurement of the testpoint being instrumented. | ||||
| Cax2230sTemperatureThreshold | 1.3.6.1.4.1.21839.2.2.18.2.1.3.1.4 | Integer32 | RO | mandatory |
column · Integer32 · read-only · mandatory The highest value that the associated instance of the object ax2230sTemperatureStatusValue may obtain before an emergency shutdown of the managed device is initiated. | ||||
| Cax2230sTemperatureState | 1.3.6.1.4.1.21839.2.2.18.2.1.3.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The current state of the testpoint being instrumented.
| ||||
| Tax2230sPowerUnitTable | 1.3.6.1.4.1.21839.2.2.18.2.1.4 | NA | mandatory | |
table · not-accessible · mandatory A table containing power unit information. | ||||
| Rax2230sPowerUnitEntry | 1.3.6.1.4.1.21839.2.2.18.2.1.4.1 | NA | mandatory | |
row · not-accessible · mandatory An entry containing power unit information. | ||||
| Cax2230sPowerUnitIndex | 1.3.6.1.4.1.21839.2.2.18.2.1.4.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory A number to position of the power units.The value from 1 to ax2230sPowerUnitNumber. | ||||
| Cax2230sPowerConnectStatus | 1.3.6.1.4.1.21839.2.2.18.2.1.4.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The current connection status of the power unit.
| ||||
| Cax2230sPowerSupplyStatus | 1.3.6.1.4.1.21839.2.2.18.2.1.4.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Status of power supply.
| ||||
| Tax2230sFanTable | 1.3.6.1.4.1.21839.2.2.18.2.1.5 | NA | mandatory | |
table · not-accessible · mandatory A table containing fan information. | ||||
| Rax2230sFanEntry | 1.3.6.1.4.1.21839.2.2.18.2.1.5.1 | NA | mandatory | |
row · not-accessible · mandatory This entry containing information for a fan. | ||||
| Cax2230sFanIndex | 1.3.6.1.4.1.21839.2.2.18.2.1.5.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory Index to indicate position of fans. | ||||
| Cax2230sFanStatus | 1.3.6.1.4.1.21839.2.2.18.2.1.5.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Status of fans.
| ||||
| Tax2230sRedundantPsTable | 1.3.6.1.4.1.21839.2.2.18.2.1.6 | NA | mandatory | |
table · not-accessible · mandatory A table containing external power supply information. | ||||
| Rax2230sRedundantPsEntry | 1.3.6.1.4.1.21839.2.2.18.2.1.6.1 | NA | mandatory | |
row · not-accessible · mandatory An entry containing external power supply information. | ||||
| Cax2230sRedundantPsIndex | 1.3.6.1.4.1.21839.2.2.18.2.1.6.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory An index that shows the external power supply position. | ||||
| Cax2230sRedundantPsConnectStatus | 1.3.6.1.4.1.21839.2.2.18.2.1.6.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Mounting an external power supply is shown.
| ||||
| Cax2230sRedundantPsStatus | 1.3.6.1.4.1.21839.2.2.18.2.1.6.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The operation of an external power supply is shown.
| ||||
| Nax2230sPhysLine | 1.3.6.1.4.1.21839.2.2.18.2.2 | |||
| Tax2230sPhysLineTable | 1.3.6.1.4.1.21839.2.2.18.2.2.1 | NA | mandatory | |
table · not-accessible · mandatory A table containing physical port information. | ||||
| Rax2230sPhysLineEntry | 1.3.6.1.4.1.21839.2.2.18.2.2.1.1 | NA | mandatory | |
row · not-accessible · mandatory An entry containing physical port. | ||||
| Cax2230sPhysLineIndex | 1.3.6.1.4.1.21839.2.2.18.2.2.1.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory Physical port number. The value is from 1 to ax2230sNifLineNumber. | ||||
| Cax2230sPhysLineConnectorType | 1.3.6.1.4.1.21839.2.2.18.2.2.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Connector type is connected physical port. The value is 1(other) when connector is disconnected or connector type is unknown.When displaying in pannel, requests board name of NIF,then will display it. The value is -1 when PSU or NIF board is disconnected.
| ||||
| Cax2230sPhysLineOperStatus | 1.3.6.1.4.1.21839.2.2.18.2.2.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Status of physical port. The value is -1 when PSU or NIF board is disconnected.
| ||||
| Cax2230sPhysLineIfIndexNumber | 1.3.6.1.4.1.21839.2.2.18.2.2.1.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Number of ifIndex which is included in physical port.The value is -1 when PSU board or NIF board is disconnected. | ||||
| Cax2230sPhysLineTransceiverStatus | 1.3.6.1.4.1.21839.2.2.18.2.2.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Type and status of replaceable transceiver.
| ||||
| Nax2230sDeviceError | 1.3.6.1.4.1.21839.2.2.18.2.3 | |||
| Sax2230sMemoryError | 1.3.6.1.4.1.21839.2.2.18.2.3.1 | INTEGER | NA | mandatory |
scalar · INTEGER · not-accessible · mandatory Information about device error.
| ||||
| Nax2230sManagementMIB | 1.3.6.1.4.1.21839.2.2.18.3 | |||
| Nax2230sOperationCommand | 1.3.6.1.4.1.21839.2.2.18.3.1 | |||
| Nax2230sFdbClearMIB | 1.3.6.1.4.1.21839.2.2.18.3.1.1 | |||
| Sax2230sFdbClearSet | 1.3.6.1.4.1.21839.2.2.18.3.1.1.1 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Fdb clear information. When want to clear fdb, then set value of this MIB as 1.
| ||||
| Sax2230sFdbClearReqTime | 1.3.6.1.4.1.21839.2.2.18.3.1.1.2 | TimeTicks | RO | mandatory |
scalar · TimeTicks · read-only · mandatory This object indicates the most recent time that received the demand to clear Fdb information.(sysUpTime) | ||||
| Sax2230sFdbClearSuccessTime | 1.3.6.1.4.1.21839.2.2.18.3.1.1.3 | TimeTicks | RO | mandatory |
scalar · TimeTicks · read-only · mandatory This object indicates the time of the most recent Fdb clearing success.(sysUpTime) | ||||
| Nax2230sAuth | 1.3.6.1.4.1.21839.2.2.18.10 | |||
| Nax2230sAuthInfo | 1.3.6.1.4.1.21839.2.2.18.10.1 | |||
| Nax2230sDot1x | 1.3.6.1.4.1.21839.2.2.18.10.2 | |||
| Nax2230sWauth | 1.3.6.1.4.1.21839.2.2.18.10.3 | |||
| Nax2230sMauth | 1.3.6.1.4.1.21839.2.2.18.10.4 | |||
| Nax2130sMib | 1.3.6.1.4.1.21839.2.2.25 | |||
| Nax2130sSwitch | 1.3.6.1.4.1.21839.2.2.25.1 | |||
| Sax2130sModelType | 1.3.6.1.4.1.21839.2.2.25.1.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Model type of this system.
| ||||
| Nax2130sSoftware | 1.3.6.1.4.1.21839.2.2.25.1.2 | |||
| Sax2130sSoftwareName | 1.3.6.1.4.1.21839.2.2.25.1.2.1 | DisplayString (SIZE (0..16)) | RO | mandatory |
scalar · DisplayString (SIZE (0..16)) · read-only · mandatory Software name of this system. | ||||
| Sax2130sSoftwareAbbreviation | 1.3.6.1.4.1.21839.2.2.25.1.2.2 | DisplayString (SIZE (0..16)) | RO | mandatory |
scalar · DisplayString (SIZE (0..16)) · read-only · mandatory System software abbreviation. | ||||
| Sax2130sSoftwareVersion | 1.3.6.1.4.1.21839.2.2.25.1.2.3 | DisplayString (SIZE (0..16)) | RO | mandatory |
scalar · DisplayString (SIZE (0..16)) · read-only · mandatory System software version. | ||||
| Nax2130sSystemMsg | 1.3.6.1.4.1.21839.2.2.25.1.3 | |||
| Sax2130sSystemMsgText | 1.3.6.1.4.1.21839.2.2.25.1.3.1 | DisplayString (SIZE (0..256)) | RO | mandatory |
scalar · DisplayString (SIZE (0..256)) · read-only · mandatory The text of the system log message.For information about this code, see: Operator's Manual. | ||||
| Sax2130sSystemMsgType | 1.3.6.1.4.1.21839.2.2.25.1.3.2 | OCTET STRING (SIZE (1)) | RO | mandatory |
scalar · OCTET STRING (SIZE (1)) · read-only · mandatory The event type. For information about this code, see: Operator's Manual. | ||||
| Sax2130sSystemMsgTimeStamp | 1.3.6.1.4.1.21839.2.2.25.1.3.3 | DisplayString (SIZE (0..14)) | RO | mandatory |
scalar · DisplayString (SIZE (0..14)) · read-only · mandatory The time that event occured. And that is expressed as type of MM/DD hh:mm:ss MM:month(01-12) DD:day(01-31) hh:hour(00-23) mm:minute(00-59) ss:second(00-59) Insert space between DD and hh. | ||||
| Sax2130sSystemMsgLevel | 1.3.6.1.4.1.21839.2.2.25.1.3.4 | OCTET STRING (SIZE (1)) | RO | mandatory |
scalar · OCTET STRING (SIZE (1)) · read-only · mandatory The newest system message log level.For information about this code, see: Operator's Manual. | ||||
| Sax2130sSystemMsgEventPoint | 1.3.6.1.4.1.21839.2.2.25.1.3.5 | DisplayString (SIZE (0..8)) | RO | mandatory |
scalar · DisplayString (SIZE (0..8)) · read-only · mandatory The code of part that system message error occured. For information about this code,see: Operator's Manual. | ||||
| Sax2130sSystemMsgEventInterfaceID | 1.3.6.1.4.1.21839.2.2.25.1.3.6 | DisplayString (SIZE (0..40)) | RO | mandatory |
scalar · DisplayString (SIZE (0..40)) · read-only · mandatory Interface identification of system messages. For information about this code,see: Operator's Manual. | ||||
| Sax2130sSystemMsgEventCode | 1.3.6.1.4.1.21839.2.2.25.1.3.7 | OCTET STRING (SIZE (4)) | RO | mandatory |
scalar · OCTET STRING (SIZE (4)) · read-only · mandatory Event kind code of system messages. For information about this code, see: Operator's Manual. | ||||
| Sax2130sSystemMsgAdditionalCode | 1.3.6.1.4.1.21839.2.2.25.1.3.8 | OCTET STRING (SIZE (6)) | RO | mandatory |
scalar · OCTET STRING (SIZE (6)) · read-only · mandatory Additional code of system messages. For information about this code, see: Operator's Manual. | ||||
| Nax2130sSnmpAgent | 1.3.6.1.4.1.21839.2.2.25.1.4 | |||
| Sax2130sSnmpSendReceiveSize | 1.3.6.1.4.1.21839.2.2.25.1.4.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory SNMP packet data size in Manager-to-Agent communication. The value is displayed in bytes. | ||||
| Sax2130sSnmpReceiveDelay | 1.3.6.1.4.1.21839.2.2.25.1.4.2 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory A recommendable interval to receive packets from Manager.The value is displayed in milliseconds. | ||||
| Sax2130sSnmpContinuousSend | 1.3.6.1.4.1.21839.2.2.25.1.4.3 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Number of times that is recommendable continuous transmission packets. | ||||
| Sax2130sSnmpObjectMaxNumber | 1.3.6.1.4.1.21839.2.2.25.1.4.4 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Max number of objects that contain SNMP packet. | ||||
| Nax2130sLicense | 1.3.6.1.4.1.21839.2.2.25.1.6 | |||
| Sax2130sLicenseNumber | 1.3.6.1.4.1.21839.2.2.25.1.6.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of the configured license serial numbers. | ||||
| Tax2130sLicenseTable | 1.3.6.1.4.1.21839.2.2.25.1.6.2 | NA | mandatory | |
table · not-accessible · mandatory The table containing the license information. | ||||
| Rax2130sLicenseEntry | 1.3.6.1.4.1.21839.2.2.25.1.6.2.1 | NA | mandatory | |
| Cax2130sLicenseIndex | 1.3.6.1.4.1.21839.2.2.25.1.6.2.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory The unique index number given for each serial number. The number is from 1 to ax2130sLicenseNumber. | ||||
| Cax2130sLicenseSerialNumber | 1.3.6.1.4.1.21839.2.2.25.1.6.2.1.2 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory The serial number. | ||||
| Cax2130sLicenseOptionNumber | 1.3.6.1.4.1.21839.2.2.25.1.6.2.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of option licenses associated with the serial number. | ||||
| Tax2130sLicenseOptionTable | 1.3.6.1.4.1.21839.2.2.25.1.6.3 | NA | mandatory | |
table · not-accessible · mandatory The table containing option licenses information associated with the serial number. | ||||
| Rax2130sLicenseOptionEntry | 1.3.6.1.4.1.21839.2.2.25.1.6.3.1 | NA | mandatory | |
row · not-accessible · mandatory The entry of the option license information associated with the serial number. | ||||
| Cax2130sLicenseOptionIndex | 1.3.6.1.4.1.21839.2.2.25.1.6.3.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory The unique index number given for each serial number. The same number as ax2130sLicenseIndex. | ||||
| Cax2130sLicenseOptionNumberIndex | 1.3.6.1.4.1.21839.2.2.25.1.6.3.1.2 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory The unique index number of option licenses information which is given for each serial number. The number is from 1 to ax2130sLicenseNumber. | ||||
| Cax2130sLicenseOptionSoftwareName | 1.3.6.1.4.1.21839.2.2.25.1.6.3.1.3 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory The software model name of the option license information associated with the serial number. | ||||
| Cax2130sLicenseOptionSoftwareAbbreviation | 1.3.6.1.4.1.21839.2.2.25.1.6.3.1.4 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory The software abbreviated name of the option license information associated with the serial number. | ||||
| Nax2130sDevice | 1.3.6.1.4.1.21839.2.2.25.2 | |||
| Nax2130sChassis | 1.3.6.1.4.1.21839.2.2.25.2.1 | |||
| Sax2130sChassisMaxNumber | 1.3.6.1.4.1.21839.2.2.25.2.1.1 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory Max number of cluster chassis that can connect to this router. | ||||
| Tax2130sChassisTable | 1.3.6.1.4.1.21839.2.2.25.2.1.2 | NA | mandatory | |
table · not-accessible · mandatory A table containing chassis information. | ||||
| Rax2130sChassisEntry | 1.3.6.1.4.1.21839.2.2.25.2.1.2.1 | NA | mandatory | |
| Cax2130sChassisIndex | 1.3.6.1.4.1.21839.2.2.25.2.1.2.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory A number to specify ax2130sChassisEntry. | ||||
| Cax2130sChassisType | 1.3.6.1.4.1.21839.2.2.25.2.1.2.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Chassis type of this system.
| ||||
| Cax2130sChassisStatus | 1.3.6.1.4.1.21839.2.2.25.2.1.2.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Current status of this chassis.
| ||||
| Cax2130sStsLedStatus | 1.3.6.1.4.1.21839.2.2.25.2.1.2.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The state of STS LED of the device is shown.
| ||||
| Cax2130sCpuName | 1.3.6.1.4.1.21839.2.2.25.2.1.2.1.5 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory CPU name is shown by the character string of 16 characters or less. | ||||
| Cax2130sCpuClock | 1.3.6.1.4.1.21839.2.2.25.2.1.2.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory CPU clock is shown by the numerical value. | ||||
| Cax2130sMemoryTotalSize | 1.3.6.1.4.1.21839.2.2.25.2.1.2.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The installing memory size is shown by the numerical value. | ||||
| Cax2130sMemoryUsedSize | 1.3.6.1.4.1.21839.2.2.25.2.1.2.1.8 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The use memory size is shown by the numerical value. | ||||
| Cax2130sMemoryFreeSize | 1.3.6.1.4.1.21839.2.2.25.2.1.2.1.9 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The unused memory size is shown by the numerical value. | ||||
| Cax2130sRomVersion | 1.3.6.1.4.1.21839.2.2.25.2.1.2.1.10 | DisplayString | RO | mandatory |
column · DisplayString · read-only · mandatory The version of ROM equipped with BCU is shown by the character string. | ||||
| Cax2130sCpuLoad1m | 1.3.6.1.4.1.21839.2.2.25.2.1.2.1.11 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory CPU utilization of one minute is shown by the numerical value. | ||||
| Cax2130sFlashTotalSize | 1.3.6.1.4.1.21839.2.2.25.2.1.2.1.12 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The total of filesystem use capacity and unused capacity in a built-in memory is shown. | ||||
| Cax2130sFlashUsedSize | 1.3.6.1.4.1.21839.2.2.25.2.1.2.1.13 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The use capacity of the filesystem in a built-in memory is shown. | ||||
| Cax2130sFlashFreeSize | 1.3.6.1.4.1.21839.2.2.25.2.1.2.1.14 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The unused capacity of the filesystem in a built-in memory is shown. | ||||
| Cax2130sSdCardStatus | 1.3.6.1.4.1.21839.2.2.25.2.1.2.1.15 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The SD card connection is shown.
| ||||
| Cax2130sSdCardTotalSize | 1.3.6.1.4.1.21839.2.2.25.2.1.2.1.16 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Total capacity of the SD card is shown by the numerical value. It responds by -1 at the MC card unconnection. | ||||
| Cax2130sSdCardUsedSize | 1.3.6.1.4.1.21839.2.2.25.2.1.2.1.17 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The use capacity of the SD card is shown by the numerical value. It responds by -1 at the SD card unconnection. | ||||
| Cax2130sSdCardFreeSize | 1.3.6.1.4.1.21839.2.2.25.2.1.2.1.18 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The remainder capacity of the SD card is shown by the numerical value. It responds by -1 at the SD card unconnection. | ||||
| Cax2130sPhysLineNumber | 1.3.6.1.4.1.21839.2.2.25.2.1.2.1.19 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Number of physical lines. | ||||
| Cax2130sTemperatureStatusNumber | 1.3.6.1.4.1.21839.2.2.25.2.1.2.1.20 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The maximum number of ax2130sTemperatureStatus in this chassis. | ||||
| Cax2130sPowerUnitNumber | 1.3.6.1.4.1.21839.2.2.25.2.1.2.1.21 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Number of maximum power switches that this router can connect its. | ||||
| Cax2130sRedundantPsNumber | 1.3.6.1.4.1.21839.2.2.25.2.1.2.1.22 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Number of external power switches that this router can connect its. | ||||
| Cax2130sFanNumber | 1.3.6.1.4.1.21839.2.2.25.2.1.2.1.23 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The maximum number of fans that can connect to this chassis. | ||||
| Cax2130sTotalAccumRunTime | 1.3.6.1.4.1.21839.2.2.25.2.1.2.1.24 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Total operation time after operation of device begins. | ||||
| Cax2130sCriticalAccumRunTime | 1.3.6.1.4.1.21839.2.2.25.2.1.2.1.25 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Operating time in critical environmental temperature. | ||||
| Tax2130sTemperatureStatusTable | 1.3.6.1.4.1.21839.2.2.25.2.1.3 | NA | mandatory | |
table · not-accessible · mandatory The table of ambient temperature status maintained by the environmental monitor. | ||||
| Rax2130sTemperatureStatusEntry | 1.3.6.1.4.1.21839.2.2.25.2.1.3.1 | NA | mandatory | |
row · not-accessible · mandatory An entry in the ambient temperature status table, representing the status of the associated testpoint maintained by the environmental monitor. | ||||
| Cax2130sTemperatureStatusIndex | 1.3.6.1.4.1.21839.2.2.25.2.1.3.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory Unique index for the testpoint being instrumented. This index is for SNMP purposes only, and has no intrinsic meaning. | ||||
| Cax2130sTemperatureStatusDescr | 1.3.6.1.4.1.21839.2.2.25.2.1.3.1.2 | DisplayString (SIZE (0..32)) | RO | mandatory |
column · DisplayString (SIZE (0..32)) · read-only · mandatory Textual description of the testpoint being instrumented. This description is a short textual label, suitable as a human-sensible identification for the rest of the information in the entry. | ||||
| Cax2130sTemperatureStatusValue | 1.3.6.1.4.1.21839.2.2.25.2.1.3.1.3 | Integer32 | RO | mandatory |
column · Integer32 · read-only · mandatory The current measurement of the testpoint being instrumented. | ||||
| Cax2130sTemperatureThreshold | 1.3.6.1.4.1.21839.2.2.25.2.1.3.1.4 | Integer32 | RO | mandatory |
column · Integer32 · read-only · mandatory The highest value that the associated instance of the object ax2130sTemperatureStatusValue may obtain before an emergency shutdown of the managed device is initiated. | ||||
| Cax2130sTemperatureState | 1.3.6.1.4.1.21839.2.2.25.2.1.3.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The current state of the testpoint being instrumented.
| ||||
| Tax2130sPowerUnitTable | 1.3.6.1.4.1.21839.2.2.25.2.1.4 | NA | mandatory | |
table · not-accessible · mandatory A table containing power unit information. | ||||
| Rax2130sPowerUnitEntry | 1.3.6.1.4.1.21839.2.2.25.2.1.4.1 | NA | mandatory | |
row · not-accessible · mandatory An entry containing power unit information. | ||||
| Cax2130sPowerUnitIndex | 1.3.6.1.4.1.21839.2.2.25.2.1.4.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory A number to position of the power units.The value from 1 to ax2130sPowerUnitNumber. | ||||
| Cax2130sPowerConnectStatus | 1.3.6.1.4.1.21839.2.2.25.2.1.4.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The current connection status of the power unit.
| ||||
| Cax2130sPowerSupplyStatus | 1.3.6.1.4.1.21839.2.2.25.2.1.4.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Status of power supply.
| ||||
| Tax2130sFanTable | 1.3.6.1.4.1.21839.2.2.25.2.1.5 | NA | mandatory | |
table · not-accessible · mandatory A table containing fan information. | ||||
| Rax2130sFanEntry | 1.3.6.1.4.1.21839.2.2.25.2.1.5.1 | NA | mandatory | |
row · not-accessible · mandatory This entry containing information for a fan. | ||||
| Cax2130sFanIndex | 1.3.6.1.4.1.21839.2.2.25.2.1.5.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory Index to indicate position of fans. | ||||
| Cax2130sFanStatus | 1.3.6.1.4.1.21839.2.2.25.2.1.5.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Status of fans.
| ||||
| Tax2130sRedundantPsTable | 1.3.6.1.4.1.21839.2.2.25.2.1.6 | NA | mandatory | |
table · not-accessible · mandatory A table containing external power supply information. | ||||
| Rax2130sRedundantPsEntry | 1.3.6.1.4.1.21839.2.2.25.2.1.6.1 | NA | mandatory | |
row · not-accessible · mandatory An entry containing external power supply information. | ||||
| Cax2130sRedundantPsIndex | 1.3.6.1.4.1.21839.2.2.25.2.1.6.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory An index that shows the external power supply position. | ||||
| Cax2130sRedundantPsConnectStatus | 1.3.6.1.4.1.21839.2.2.25.2.1.6.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Mounting an external power supply is shown.
| ||||
| Cax2130sRedundantPsStatus | 1.3.6.1.4.1.21839.2.2.25.2.1.6.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The operation of an external power supply is shown.
| ||||
| Nax2130sPhysLine | 1.3.6.1.4.1.21839.2.2.25.2.2 | |||
| Tax2130sPhysLineTable | 1.3.6.1.4.1.21839.2.2.25.2.2.1 | NA | mandatory | |
table · not-accessible · mandatory A table containing physical port information. | ||||
| Rax2130sPhysLineEntry | 1.3.6.1.4.1.21839.2.2.25.2.2.1.1 | NA | mandatory | |
row · not-accessible · mandatory An entry containing physical port. | ||||
| Cax2130sPhysLineIndex | 1.3.6.1.4.1.21839.2.2.25.2.2.1.1.1 | INTEGER | NA | mandatory |
column · INTEGER · not-accessible · mandatory Physical port number. The value is from 1 to ax2130sNifLineNumber. | ||||
| Cax2130sPhysLineConnectorType | 1.3.6.1.4.1.21839.2.2.25.2.2.1.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Connector type is connected physical port. The value is 1(other) when connector is disconnected or connector type is unknown.When displaying in pannel, requests board name of NIF,then will display it. The value is -1 when PSU or NIF board is disconnected.
| ||||
| Cax2130sPhysLineOperStatus | 1.3.6.1.4.1.21839.2.2.25.2.2.1.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Status of physical port. The value is -1 when PSU or NIF board is disconnected.
| ||||
| Cax2130sPhysLineIfIndexNumber | 1.3.6.1.4.1.21839.2.2.25.2.2.1.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Number of ifIndex which is included in physical port.The value is -1 when PSU board or NIF board is disconnected. | ||||
| Cax2130sPhysLineTransceiverStatus | 1.3.6.1.4.1.21839.2.2.25.2.2.1.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory Type and status of replaceable transceiver.
| ||||
| Nax2130sDeviceError | 1.3.6.1.4.1.21839.2.2.25.2.3 | |||
| Sax2130sMemoryError | 1.3.6.1.4.1.21839.2.2.25.2.3.1 | INTEGER | NA | mandatory |
scalar · INTEGER · not-accessible · mandatory Information about device error.
| ||||
| Nax2130sManagementMIB | 1.3.6.1.4.1.21839.2.2.25.3 | |||
| Nax2130sOperationCommand | 1.3.6.1.4.1.21839.2.2.25.3.1 | |||
| Nax2130sFdbClearMIB | 1.3.6.1.4.1.21839.2.2.25.3.1.1 | |||
| Sax2130sFdbClearSet | 1.3.6.1.4.1.21839.2.2.25.3.1.1.1 | INTEGER | RW | mandatory |
scalar · INTEGER · read-write · mandatory Fdb clear information. When want to clear fdb, then set value of this MIB as 1.
| ||||
| Sax2130sFdbClearReqTime | 1.3.6.1.4.1.21839.2.2.25.3.1.1.2 | TimeTicks | RO | mandatory |
scalar · TimeTicks · read-only · mandatory This object indicates the most recent time that received the demand to clear Fdb information.(sysUpTime) | ||||
| Sax2130sFdbClearSuccessTime | 1.3.6.1.4.1.21839.2.2.25.3.1.1.3 | TimeTicks | RO | mandatory |
scalar · TimeTicks · read-only · mandatory This object indicates the time of the most recent Fdb clearing success.(sysUpTime) | ||||
| Nax2130sAuth | 1.3.6.1.4.1.21839.2.2.25.10 | |||
| Nax2130sAuthInfo | 1.3.6.1.4.1.21839.2.2.25.10.1 | |||
| Nax2130sDot1x | 1.3.6.1.4.1.21839.2.2.25.10.2 | |||
| Nax2130sWauth | 1.3.6.1.4.1.21839.2.2.25.10.3 | |||
| Nax2130sMauth | 1.3.6.1.4.1.21839.2.2.25.10.4 | |||
Traps / Notifications
- axsOadpNeighborCachelastChangeTrap
1.3.6.1.4.1.21839.2.2.1.7.2.0.1 - axsOspfIfAuthFailure
1.3.6.1.4.1.21839.2.2.1.14.16.2.0.6 - axsOspfIfConfigError
1.3.6.1.4.1.21839.2.2.1.14.16.2.0.4 - axsOspfIfStateChange
1.3.6.1.4.1.21839.2.2.1.14.16.2.0.16 - axsOspfNbrStateChange
1.3.6.1.4.1.21839.2.2.1.14.16.2.0.2 - axsOspfVirtIfAuthFailure
1.3.6.1.4.1.21839.2.2.1.14.16.2.0.7 - axsOspfVirtIfConfigError
1.3.6.1.4.1.21839.2.2.1.14.16.2.0.5 - axsOspfVirtIfStateChange
1.3.6.1.4.1.21839.2.2.1.14.16.2.0.1 - axsOspfVirtNbrStateChange
1.3.6.1.4.1.21839.2.2.1.14.16.2.0.3