ADVANTECH-EKI-PRONEER-MIB
Advantech Co., Ltd.The MIB module is for Advantech switch,
e.g. EKI-XXXX, etc.
Copyright (C) Advantech iConnectivity Group(2014).snmptranslate -m ADVANTECH-EKI-PRONEER-MIB -Tpsnmpwalk -v2c -c <community> -m ADVANTECH-EKI-PRONEER-MIB <host> 1.3.6.1.4.1.10297Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Iadvantech | 1.3.6.1.4.1.10297 | ||||||||||||||||||||
identity The MIB module is for Advantech switch,
e.g. EKI-XXXX, etc.
Copyright (C) Advantech iConnectivity Group(2014). | |||||||||||||||||||||
| NaSwitchMIB | 1.3.6.1.4.1.10297.202 | ||||||||||||||||||||
| Nproneer | 1.3.6.1.4.1.10297.202.7000 | ||||||||||||||||||||
| Nmonitoring | 1.3.6.1.4.1.10297.202.7000.1 | ||||||||||||||||||||
| NdeviceInfo | 1.3.6.1.4.1.10297.202.7000.1.1 | ||||||||||||||||||||
| SsystemName | 1.3.6.1.4.1.10297.202.7000.1.1.1 | DisplayString (SIZE (0..128)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..128)) · read-write · current System name of the switch | |||||||||||||||||||||
| SsystemLocation | 1.3.6.1.4.1.10297.202.7000.1.1.2 | DisplayString (SIZE (0..255)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..255)) · read-write · current System location of the switch. | |||||||||||||||||||||
| SsystemContact | 1.3.6.1.4.1.10297.202.7000.1.1.3 | DisplayString (SIZE (0..255)) | RW | ||||||||||||||||||
scalar · DisplayString (SIZE (0..255)) · read-write · current System contact of the switch | |||||||||||||||||||||
| SmacAddress | 1.3.6.1.4.1.10297.202.7000.1.1.4 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current MAC address of the switch. | |||||||||||||||||||||
| SipAddress | 1.3.6.1.4.1.10297.202.7000.1.1.5 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current IP address of the switch. | |||||||||||||||||||||
| SsubnetMask | 1.3.6.1.4.1.10297.202.7000.1.1.6 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current Subnet mask of the switch. | |||||||||||||||||||||
| Sgateway | 1.3.6.1.4.1.10297.202.7000.1.1.7 | IpAddress | RO | ||||||||||||||||||
scalar · IpAddress · read-only · current Default gateway of the switch. | |||||||||||||||||||||
| SloaderVersion | 1.3.6.1.4.1.10297.202.7000.1.1.8 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current Boot loader version of the switch. | |||||||||||||||||||||
| SloaderDate | 1.3.6.1.4.1.10297.202.7000.1.1.9 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current Boot loader date of the switch. | |||||||||||||||||||||
| SfirmwareVersion | 1.3.6.1.4.1.10297.202.7000.1.1.10 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current Firmware version of the switch. | |||||||||||||||||||||
| SfirmwareDate | 1.3.6.1.4.1.10297.202.7000.1.1.11 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current Firmware release date of the switch. | |||||||||||||||||||||
| SsystemObjectID | 1.3.6.1.4.1.10297.202.7000.1.1.12 | OBJECT IDENTIFIER | RO | ||||||||||||||||||
scalar · OBJECT IDENTIFIER · read-only · current SNMP system object ID of the switch. | |||||||||||||||||||||
| SsystemUpTime | 1.3.6.1.4.1.10297.202.7000.1.1.13 | TimeTicks | RO | ||||||||||||||||||
scalar · TimeTicks · read-only · current The time since the switch was last re-initialized. | |||||||||||||||||||||
| NledStatus | 1.3.6.1.4.1.10297.202.7000.1.1.14 | ||||||||||||||||||||
| SledSYSStatus | 1.3.6.1.4.1.10297.202.7000.1.1.14.1 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The LED status of system operating.
| |||||||||||||||||||||
| SledRMStatus | 1.3.6.1.4.1.10297.202.7000.1.1.14.2 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The LED status of ring master.
| |||||||||||||||||||||
| SledPWR1Status | 1.3.6.1.4.1.10297.202.7000.1.1.14.3 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The LED status of power input 1.
| |||||||||||||||||||||
| SledPWR2Status | 1.3.6.1.4.1.10297.202.7000.1.1.14.4 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The LED status of power input 2.
| |||||||||||||||||||||
| SledAlarmStatus | 1.3.6.1.4.1.10297.202.7000.1.1.14.5 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The LED status of alarm.
| |||||||||||||||||||||
| SledPFAILStatus | 1.3.6.1.4.1.10297.202.7000.1.1.14.6 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The LED status of P-Fail.
| |||||||||||||||||||||
| SledRFAILStatus | 1.3.6.1.4.1.10297.202.7000.1.1.14.7 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The LED status of R-Fail.
| |||||||||||||||||||||
| SledLOOPStatus | 1.3.6.1.4.1.10297.202.7000.1.1.14.8 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The LED status of loop detection.
| |||||||||||||||||||||
| SledTempStatus | 1.3.6.1.4.1.10297.202.7000.1.1.14.9 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The LED status of system temperature.
| |||||||||||||||||||||
| SbuildVersion | 1.3.6.1.4.1.10297.202.7000.1.1.15 | DisplayString | RO | D120308S06449 | |||||||||||||||||
scalar · DisplayString · read-only · current Build version of the switch. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NloggingMessage | 1.3.6.1.4.1.10297.202.7000.1.2 | ||||||||||||||||||||
| TloggingBufferTable | 1.3.6.1.4.1.10297.202.7000.1.2.1 | NA | |||||||||||||||||||
table · not-accessible · current The table of the logging buffer | |||||||||||||||||||||
| RloggingBufferEntry | 1.3.6.1.4.1.10297.202.7000.1.2.1.1 | NA | |||||||||||||||||||
| CloggingBufferIndex | 1.3.6.1.4.1.10297.202.7000.1.2.1.1.1 | Integer32 (1..65535) | NA | ||||||||||||||||||
column · Integer32 (1..65535) · not-accessible · current The index of the logging buffer | |||||||||||||||||||||
| CloggingBufferSeverity | 1.3.6.1.4.1.10297.202.7000.1.2.1.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The severity of the logging buffer.
| |||||||||||||||||||||
| CloggingBufferCategory | 1.3.6.1.4.1.10297.202.7000.1.2.1.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The category of the logging buffer. | |||||||||||||||||||||
| CloggingBufferTimeStamp | 1.3.6.1.4.1.10297.202.7000.1.2.1.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The time stamp of the logging buffer. | |||||||||||||||||||||
| CloggingBufferMessage | 1.3.6.1.4.1.10297.202.7000.1.2.1.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The messge of the logging buffer. | |||||||||||||||||||||
| SclearBufferedMsg | 1.3.6.1.4.1.10297.202.7000.1.2.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Delete the logging message in buffer.
| |||||||||||||||||||||
| TloggingFileTable | 1.3.6.1.4.1.10297.202.7000.1.2.3 | NA | |||||||||||||||||||
table · not-accessible · current The table of the logging file | |||||||||||||||||||||
| RloggingFileEntry | 1.3.6.1.4.1.10297.202.7000.1.2.3.1 | NA | |||||||||||||||||||
| CloggingFileIndex | 1.3.6.1.4.1.10297.202.7000.1.2.3.1.1 | Integer32 (1..65535) | NA | ||||||||||||||||||
column · Integer32 (1..65535) · not-accessible · current The index of the logging file | |||||||||||||||||||||
| CloggingFileSeverity | 1.3.6.1.4.1.10297.202.7000.1.2.3.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The severity of the logging file
| |||||||||||||||||||||
| CloggingFileCategory | 1.3.6.1.4.1.10297.202.7000.1.2.3.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The category of the logging file | |||||||||||||||||||||
| CloggingFileTimeStamp | 1.3.6.1.4.1.10297.202.7000.1.2.3.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The time stamp of the logging file | |||||||||||||||||||||
| CloggingFileMessage | 1.3.6.1.4.1.10297.202.7000.1.2.3.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The message of the logging file | |||||||||||||||||||||
| SclearFileMsg | 1.3.6.1.4.1.10297.202.7000.1.2.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Delete the logging message in file.
| |||||||||||||||||||||
| NportMonitoring | 1.3.6.1.4.1.10297.202.7000.1.3 | ||||||||||||||||||||
| TportStatisticTable | 1.3.6.1.4.1.10297.202.7000.1.3.1 | NA | |||||||||||||||||||
table · not-accessible · current The table of the RMON counters. | |||||||||||||||||||||
| RportStatisticEntry | 1.3.6.1.4.1.10297.202.7000.1.3.1.1 | NA | |||||||||||||||||||
| CportStatisticIndex | 1.3.6.1.4.1.10297.202.7000.1.3.1.1.1 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current The port index of the port counters. | |||||||||||||||||||||
| CportCounterClear | 1.3.6.1.4.1.10297.202.7000.1.3.1.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Clear the port counter.
| |||||||||||||||||||||
| CifInOctets | 1.3.6.1.4.1.10297.202.7000.1.3.1.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The total number of octets received on the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | |||||||||||||||||||||
| CifInUcastPkts | 1.3.6.1.4.1.10297.202.7000.1.3.1.1.4 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | |||||||||||||||||||||
| CifInNUcastPkts | 1.3.6.1.4.1.10297.202.7000.1.3.1.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast or broadcast address at this sub-layer. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. This object is deprecated in favour of ifInMulticastPkts and ifInBroadcastPkts. | |||||||||||||||||||||
| CifInDiscards | 1.3.6.1.4.1.10297.202.7000.1.3.1.1.6 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime | |||||||||||||||||||||
| CifOutOctets | 1.3.6.1.4.1.10297.202.7000.1.3.1.1.7 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The total number of octets transmitted out of the interface, including framing characters. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | |||||||||||||||||||||
| CifOutUcastPkts | 1.3.6.1.4.1.10297.202.7000.1.3.1.1.8 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | |||||||||||||||||||||
| CifOutNUcastPkts | 1.3.6.1.4.1.10297.202.7000.1.3.1.1.9 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast or broadcast address at this sub-layer, including those that were discarded or not sent. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. This object is deprecated in favour of ifOutMulticastPkts and ifOutBroadcastPkts. | |||||||||||||||||||||
| CifOutDiscards | 1.3.6.1.4.1.10297.202.7000.1.3.1.1.10 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | |||||||||||||||||||||
| CifInMulticastPkts | 1.3.6.1.4.1.10297.202.7000.1.3.1.1.11 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer protocol, this includes both Group and Functional addresses. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | |||||||||||||||||||||
| CifInBroadcastPkts | 1.3.6.1.4.1.10297.202.7000.1.3.1.1.12 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | |||||||||||||||||||||
| CifOutMulticastPkts | 1.3.6.1.4.1.10297.202.7000.1.3.1.1.13 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including those that were discarded or not sent. For a MAC layer protocol, this includes both Group and Functional addresses. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | |||||||||||||||||||||
| CifOutBroadcastPkts | 1.3.6.1.4.1.10297.202.7000.1.3.1.1.14 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including those that were discarded or not sent. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | |||||||||||||||||||||
| Cdot3StatsAlignmentErrors | 1.3.6.1.4.1.10297.202.7000.1.3.1.1.15 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current A count of frames received on a particular interface that are not an integral number of octets in length and do not pass the FCS check. The count represented by an instance of this object is incremented when the alignmentError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions pertain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. This counter does not increment for group encoding schemes greater than 4 bits per group. For interfaces operating at 10 Gb/s, this counter can roll over in less than 5 minutes if it is incrementing at its maximum rate. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information, a management station is advised to poll the dot3HCStatsAlignmentErrors object for 10 Gb/s or faster interfaces. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | |||||||||||||||||||||
| Cdot3StatsFCSErrors | 1.3.6.1.4.1.10297.202.7000.1.3.1.1.16 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current A count of frames received on a particular interface that are an integral number of octets in length but do not pass the FCS check. This count does not include frames received with frame-too-long or frame-too-short error. The count represented by an instance of this object is incremented when the frameCheckError status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions pertain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. Note: Coding errors detected by the physical layer for speeds above 10 Mb/s will cause the frame to fail the FCS check. For interfaces operating at 10 Gb/s, this counter can roll over in less than 5 minutes if it is incrementing at its maximum rate. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information, a management station is advised to poll the dot3HCStatsFCSErrors object for 10 Gb/s or faster interfaces. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | |||||||||||||||||||||
| Cdot3StatsSingleCollisionFrames | 1.3.6.1.4.1.10297.202.7000.1.3.1.1.17 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current A count of frames that are involved in a single collision, and are subsequently transmitted successfully. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the dot3StatsMultipleCollisionFrames object. This counter does not increment when the interface is operating in full-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | |||||||||||||||||||||
| Cdot3StatsMultipleCollisionFrames | 1.3.6.1.4.1.10297.202.7000.1.3.1.1.18 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current A count of frames that are involved in more than one collision and are subsequently transmitted successfully. A frame that is counted by an instance of this object is also counted by the corresponding instance of either the ifOutUcastPkts, ifOutMulticastPkts, or ifOutBroadcastPkts, and is not counted by the corresponding instance of the dot3StatsSingleCollisionFrames object. This counter does not increment when the interface is operating in full-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | |||||||||||||||||||||
| Cdot3StatsDeferredTransmissions | 1.3.6.1.4.1.10297.202.7000.1.3.1.1.19 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current A count of frames for which the first transmission attempt on a particular interface is delayed because the medium is busy. The count represented by an instance of this object does not include frames involved in collisions. This counter does not increment when the interface is operating in full-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | |||||||||||||||||||||
| Cdot3StatsLateCollisions | 1.3.6.1.4.1.10297.202.7000.1.3.1.1.20 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The number of times that a collision is detected on a particular interface later than one slotTime into the transmission of a packet. A (late) collision included in a count represented by an instance of this object is also considered as a (generic) collision for purposes of other collision-related statistics. | |||||||||||||||||||||
| Cdot3StatsExcessiveCollisions | 1.3.6.1.4.1.10297.202.7000.1.3.1.1.21 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current A count of frames for which transmission on a particular interface fails due to excessive collisions. This counter does not increment when the interface is operating in full-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | |||||||||||||||||||||
| Cdot3StatsFrameTooLongs | 1.3.6.1.4.1.10297.202.7000.1.3.1.1.22 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current A count of frames received on a particular interface that exceed the maximum permitted frame size. The count represented by an instance of this object is incremented when the frameTooLong status is returned by the MAC service to the LLC (or other MAC user). Received frames for which multiple error conditions pertain are, according to the conventions of IEEE 802.3 Layer Management, counted exclusively according to the error status presented to the LLC. For interfaces operating at 10 Gb/s, this counter can roll over in less than 80 minutes if it is incrementing at its maximum rate. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information, a management station is advised to poll the dot3HCStatsFrameTooLongs object for 10 Gb/s or faster interfaces. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | |||||||||||||||||||||
| Cdot3StatsSymbolErrors | 1.3.6.1.4.1.10297.202.7000.1.3.1.1.23 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current For an interface operating at 100 Mb/s, the number of times there was an invalid data symbol when a valid carrier was present. For an interface operating in half-duplex mode at 1000 Mb/s, the number of times the receiving media is non-idle (a carrier event) for a period of time equal to or greater than slotTime, and during which there was at least one occurrence of an event that causes the PHY to indicate 'Data reception error' or 'carrier extend error' on the GMII. For an interface operating in full-duplex mode at 1000 Mb/s, the number of times the receiving media is non-idle (a carrier event) for a period of time equal to or greater than minFrameSize, and during which there was at least one occurrence of an event that causes the PHY to indicate 'Data reception error' on the GMII. For an interface operating at 10 Gb/s, the number of times the receiving media is non-idle (a carrier event) for a period of time equal to or greater than minFrameSize, and during which there was at least one occurrence of an event that causes the PHY to indicate 'Receive Error' on the XGMII. The count represented by an instance of this object is incremented at most once per carrier event, even if multiple symbol errors occur during the carrier event. This count does not increment if a collision is present. This counter does not increment when the interface is operating at 10 Mb/s. For interfaces operating at 10 Gb/s, this counter can roll over in less than 5 minutes if it is incrementing at its maximum rate. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information, a management station is advised to poll the dot3HCStatsSymbolErrors object for 10 Gb/s or faster interfaces. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | |||||||||||||||||||||
| Cdot3ControlInUnknownOpcodes | 1.3.6.1.4.1.10297.202.7000.1.3.1.1.24 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current A count of MAC Control frames received on this interface that contain an opcode that is not supported by this device. For interfaces operating at 10 Gb/s, this counter can roll over in less than 5 minutes if it is incrementing at its maximum rate. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information, a management station is advised to poll the dot3HCControlInUnknownOpcodes object for 10 Gb/s or faster interfaces. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | |||||||||||||||||||||
| Cdot3InPauseFrames | 1.3.6.1.4.1.10297.202.7000.1.3.1.1.25 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current A count of MAC Control frames received on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is operating in half-duplex mode. For interfaces operating at 10 Gb/s, this counter can roll over in less than 5 minutes if it is incrementing at its maximum rate. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information, a management station is advised to poll the dot3HCInPauseFrames object for 10 Gb/s or faster interfaces. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | |||||||||||||||||||||
| Cdot3OutPauseFrames | 1.3.6.1.4.1.10297.202.7000.1.3.1.1.26 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current A count of MAC Control frames transmitted on this interface with an opcode indicating the PAUSE operation. This counter does not increment when the interface is operating in half-duplex mode. For interfaces operating at 10 Gb/s, this counter can roll over in less than 5 minutes if it is incrementing at its maximum rate. Since that amount of time could be less than a management station's poll cycle time, in order to avoid a loss of information, a management station is advised to poll the dot3HCOutPauseFrames object for 10 Gb/s or faster interfaces. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime. | |||||||||||||||||||||
| NlinkAggregation | 1.3.6.1.4.1.10297.202.7000.1.4 | ||||||||||||||||||||
| TlagStatusTable | 1.3.6.1.4.1.10297.202.7000.1.4.1 | NA | |||||||||||||||||||
table · not-accessible · current The table of the link aggregation group | |||||||||||||||||||||
| RlagStatusEntry | 1.3.6.1.4.1.10297.202.7000.1.4.1.1 | NA | |||||||||||||||||||
| ClagStatusIndex | 1.3.6.1.4.1.10297.202.7000.1.4.1.1.1 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current The name of the link aggregation group | |||||||||||||||||||||
| ClagStatusName | 1.3.6.1.4.1.10297.202.7000.1.4.1.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The LAG port description | |||||||||||||||||||||
| ClagStatusType | 1.3.6.1.4.1.10297.202.7000.1.4.1.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The type of the LAG. Static: The group of ports assigned to a static LAG are always active members. LACP: The group of ports assigned to dynamic LAG are candidate ports. LACP determines which candidate ports are active member ports.
| |||||||||||||||||||||
| ClagStatusLinkState | 1.3.6.1.4.1.10297.202.7000.1.4.1.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current LAG port link status
| |||||||||||||||||||||
| ClagStatusActiveMember | 1.3.6.1.4.1.10297.202.7000.1.4.1.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Active member ports of the LAG | |||||||||||||||||||||
| ClagStatusStandbyMember | 1.3.6.1.4.1.10297.202.7000.1.4.1.1.6 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Inactive or candudate member ports of the LAG | |||||||||||||||||||||
| TlacpInfoTable | 1.3.6.1.4.1.10297.202.7000.1.4.2 | NA | |||||||||||||||||||
table · not-accessible · current The table of LACP | |||||||||||||||||||||
| RlacpInfoEntry | 1.3.6.1.4.1.10297.202.7000.1.4.2.1 | NA | |||||||||||||||||||
| ClacpInfoLagIndex | 1.3.6.1.4.1.10297.202.7000.1.4.2.1.1 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The LACP name | |||||||||||||||||||||
| ClacpInfoPortIndex | 1.3.6.1.4.1.10297.202.7000.1.4.2.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Member port name | |||||||||||||||||||||
| ClacpInfoPartnerSysId | 1.3.6.1.4.1.10297.202.7000.1.4.2.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The system ID of link partner. | |||||||||||||||||||||
| ClacpInfoPnkey | 1.3.6.1.4.1.10297.202.7000.1.4.2.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Port key of partner | |||||||||||||||||||||
| ClacpInfoAtkey | 1.3.6.1.4.1.10297.202.7000.1.4.2.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Port key of actor | |||||||||||||||||||||
| ClacpInfoSel | 1.3.6.1.4.1.10297.202.7000.1.4.2.1.6 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LACP selection logic status of the port | |||||||||||||||||||||
| ClacpInfoMux | 1.3.6.1.4.1.10297.202.7000.1.4.2.1.7 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LACP mux state machine status of the port | |||||||||||||||||||||
| ClacpInfoReceiv | 1.3.6.1.4.1.10297.202.7000.1.4.2.1.8 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LACP receive state machine status of the port | |||||||||||||||||||||
| ClacpInfoPrdtx | 1.3.6.1.4.1.10297.202.7000.1.4.2.1.9 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LACP periodic transmission state machine status of the port. | |||||||||||||||||||||
| ClacpInfoAtstat | 1.3.6.1.4.1.10297.202.7000.1.4.2.1.10 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The actor state field of LACP PDU description. | |||||||||||||||||||||
| ClacpInfoPnstat | 1.3.6.1.4.1.10297.202.7000.1.4.2.1.11 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The partner state field of LACP PDU description. | |||||||||||||||||||||
| NlldpStatistics | 1.3.6.1.4.1.10297.202.7000.1.5 | ||||||||||||||||||||
| SlldpClearStatistics | 1.3.6.1.4.1.10297.202.7000.1.5.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Clear the LLDP statistics
| |||||||||||||||||||||
| Sinertions | 1.3.6.1.4.1.10297.202.7000.1.5.2 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The number of times the complete set of infomation advertised by a partcular MAC Service Access Point(MSAP) has been inserted into tables associated with the remote systems | |||||||||||||||||||||
| Sdeletions | 1.3.6.1.4.1.10297.202.7000.1.5.3 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The number of times the complete set of infomation advertised by MSAP has been deleted from tables associated with the remote systems | |||||||||||||||||||||
| Sdrops | 1.3.6.1.4.1.10297.202.7000.1.5.4 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The number of times the complete set of information advertised by MSAP could not be entered into tables associated with the remote systems because of insufficient resources. | |||||||||||||||||||||
| Sageouts | 1.3.6.1.4.1.10297.202.7000.1.5.5 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The number of times the complete set of information advertised by MSAP has been deleted from tables associated with the remote systems because the information timeliness interval has expired. | |||||||||||||||||||||
| TlldpPortStatisticsTable | 1.3.6.1.4.1.10297.202.7000.1.5.6 | NA | |||||||||||||||||||
table · not-accessible · current The table of LLDP port statistics | |||||||||||||||||||||
| RlldpPortStatisticsEntry | 1.3.6.1.4.1.10297.202.7000.1.5.6.1 | NA | |||||||||||||||||||
| ClldpPortStatIndex | 1.3.6.1.4.1.10297.202.7000.1.5.6.1.1 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current Interface or port number. | |||||||||||||||||||||
| ClldpPortStatTotalTxFrame | 1.3.6.1.4.1.10297.202.7000.1.5.6.1.2 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Number of LLDP frames transmitted on the corresponding port. | |||||||||||||||||||||
| ClldpPortStatTotalRxFrame | 1.3.6.1.4.1.10297.202.7000.1.5.6.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Number of LLDP frames received by this LLDP agent on the corresponding port, while the LLDP agent is enabled | |||||||||||||||||||||
| ClldpPortStatDiscardRxFrame | 1.3.6.1.4.1.10297.202.7000.1.5.6.1.4 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Number of LLDP frames discard for any reason by this LLDP agent on the corresponding port | |||||||||||||||||||||
| ClldpPortStatErrorRxFrame | 1.3.6.1.4.1.10297.202.7000.1.5.6.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Number of invalid LLDP frames received by the LLDP agent on the corresponding port, while the LLDP agent is enabled | |||||||||||||||||||||
| ClldpPortStatDiscardRxTlv | 1.3.6.1.4.1.10297.202.7000.1.5.6.1.6 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Number of TLVs LLDP frames discard for any reason by this LLDP agent on the corresponding port | |||||||||||||||||||||
| ClldpPortStatUnrecognizedRxTlv | 1.3.6.1.4.1.10297.202.7000.1.5.6.1.7 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Number of TLVs LLDP frames that are unrecognized while this LLDP agent is enabled | |||||||||||||||||||||
| ClldpPortStatTotalRxAgeouts | 1.3.6.1.4.1.10297.202.7000.1.5.6.1.8 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Number of age out LLDP frames | |||||||||||||||||||||
| NigmpStatistics | 1.3.6.1.4.1.10297.202.7000.1.6 | ||||||||||||||||||||
| StotalRx | 1.3.6.1.4.1.10297.202.7000.1.6.1 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current IGMP snooping total Rx counter | |||||||||||||||||||||
| SvalidRx | 1.3.6.1.4.1.10297.202.7000.1.6.2 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current IGMP snooping valid Rx counter | |||||||||||||||||||||
| SinvalidRx | 1.3.6.1.4.1.10297.202.7000.1.6.3 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current IGMP snooping invalid Rx counter | |||||||||||||||||||||
| SotherRx | 1.3.6.1.4.1.10297.202.7000.1.6.4 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current IGMP snooping other Rx counter | |||||||||||||||||||||
| SleaveRx | 1.3.6.1.4.1.10297.202.7000.1.6.5 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current IGMP snooping leave Rx counter | |||||||||||||||||||||
| SreportRx | 1.3.6.1.4.1.10297.202.7000.1.6.6 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current IGMP snooping report Rx counter | |||||||||||||||||||||
| SgeneralQueryRx | 1.3.6.1.4.1.10297.202.7000.1.6.7 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current IGMP snooping general query Rx counter | |||||||||||||||||||||
| SspecialGroupQueryRx | 1.3.6.1.4.1.10297.202.7000.1.6.8 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current IGMP snooping special group query Rx counter | |||||||||||||||||||||
| SspecialGroupSourceQueryRx | 1.3.6.1.4.1.10297.202.7000.1.6.9 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current IGMP snooping special group source query Rx counter | |||||||||||||||||||||
| SleaveTx | 1.3.6.1.4.1.10297.202.7000.1.6.10 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current IGMP snooping leave Tx counter | |||||||||||||||||||||
| SreportTx | 1.3.6.1.4.1.10297.202.7000.1.6.11 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current IGMP snooping report Tx counter | |||||||||||||||||||||
| SgeneralQueryTx | 1.3.6.1.4.1.10297.202.7000.1.6.12 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current IGMP snooping general query Tx counter | |||||||||||||||||||||
| SspecialGroupQueryTx | 1.3.6.1.4.1.10297.202.7000.1.6.13 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current IGMP snooping special group query Tx counter | |||||||||||||||||||||
| SspecialGroupSourceQueryTx | 1.3.6.1.4.1.10297.202.7000.1.6.14 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current IGMP snooping special group source query Tx counter | |||||||||||||||||||||
| SclearigmpStatistics | 1.3.6.1.4.1.10297.202.7000.1.6.15 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Clear IGMP snooping statistics counter
| |||||||||||||||||||||
| NmldStatistics | 1.3.6.1.4.1.10297.202.7000.1.7 | ||||||||||||||||||||
| SmldtotalRx | 1.3.6.1.4.1.10297.202.7000.1.7.1 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current MLD total Rx counter | |||||||||||||||||||||
| SmldvalidRx | 1.3.6.1.4.1.10297.202.7000.1.7.2 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current MLD valid Rx counter | |||||||||||||||||||||
| SmldinvalidRx | 1.3.6.1.4.1.10297.202.7000.1.7.3 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current MLD invalid Rx counter | |||||||||||||||||||||
| SmldotherRx | 1.3.6.1.4.1.10297.202.7000.1.7.4 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current MLD other Rx counter | |||||||||||||||||||||
| SmldleaveRx | 1.3.6.1.4.1.10297.202.7000.1.7.5 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current MLD leave Rx counter | |||||||||||||||||||||
| SmldreportRx | 1.3.6.1.4.1.10297.202.7000.1.7.6 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current MLD report Rx counter | |||||||||||||||||||||
| SmldgeneralQueryRx | 1.3.6.1.4.1.10297.202.7000.1.7.7 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current MLD general query Rx counter | |||||||||||||||||||||
| SmldspecialGroupQueryRx | 1.3.6.1.4.1.10297.202.7000.1.7.8 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current MLD special group query Rx counter | |||||||||||||||||||||
| SmldspecialGroupSourceQueryRx | 1.3.6.1.4.1.10297.202.7000.1.7.9 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current MLD special group source query Rx counter | |||||||||||||||||||||
| SmldleaveTx | 1.3.6.1.4.1.10297.202.7000.1.7.10 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current MLD leave Tx counter | |||||||||||||||||||||
| SmldreportTx | 1.3.6.1.4.1.10297.202.7000.1.7.11 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current MLD report Tx counter | |||||||||||||||||||||
| SmldgeneralQueryTx | 1.3.6.1.4.1.10297.202.7000.1.7.12 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current MLD general query Tx counter | |||||||||||||||||||||
| SmldspecialGroupQueryTx | 1.3.6.1.4.1.10297.202.7000.1.7.13 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current MLD special group query Tx counter | |||||||||||||||||||||
| SmldspecialGroupSourceQueryTx | 1.3.6.1.4.1.10297.202.7000.1.7.14 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current MLD special group source query Tx counter | |||||||||||||||||||||
| SclearmldStatistics | 1.3.6.1.4.1.10297.202.7000.1.7.15 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Clear MLD statistics counter
| |||||||||||||||||||||
| Nsystem | 1.3.6.1.4.1.10297.202.7000.2 | ||||||||||||||||||||
| NipSettings | 1.3.6.1.4.1.10297.202.7000.2.1 | ||||||||||||||||||||
| Sipv4Mode | 1.3.6.1.4.1.10297.202.7000.2.1.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current the mode of network connection Static: Enable static IP address. DHCP: Enable DHCP to obtain IP information from a DHCP server on the network.
| |||||||||||||||||||||
| Sipv4Address | 1.3.6.1.4.1.10297.202.7000.2.1.2 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current If static mode is enabled, enter IP address in this field. | |||||||||||||||||||||
| Sipv4SubnetMask | 1.3.6.1.4.1.10297.202.7000.2.1.3 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current If static mode is enabled, enter subnet mask in this field. | |||||||||||||||||||||
| Sipv4Gateway | 1.3.6.1.4.1.10297.202.7000.2.1.4 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current If static mode is enabled, enter gateway address in this field. | |||||||||||||||||||||
| Sipv4DnsServer1 | 1.3.6.1.4.1.10297.202.7000.2.1.5 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current If static mode is enabled, enter primary DNS server address in this field | |||||||||||||||||||||
| Sipv4DnsServer2 | 1.3.6.1.4.1.10297.202.7000.2.1.6 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current If static mode is enabled, enter secondary DNS server address in this field | |||||||||||||||||||||
| TinterfaceIpv4Table | 1.3.6.1.4.1.10297.202.7000.2.1.7 | NA | |||||||||||||||||||
table · not-accessible · current The table of interface IP address | |||||||||||||||||||||
| RinterfaceIpv4Entry | 1.3.6.1.4.1.10297.202.7000.2.1.7.1 | NA | |||||||||||||||||||
| CinterfaceIpv4Index | 1.3.6.1.4.1.10297.202.7000.2.1.7.1.1 | Integer32 (1..32) | RO | ||||||||||||||||||
column · Integer32 (1..32) · read-only · current The index of interface IPv4 table | |||||||||||||||||||||
| CinterfaceIpv4Vlan | 1.3.6.1.4.1.10297.202.7000.2.1.7.1.2 | Integer32 (1..4094) | RO | ||||||||||||||||||
column · Integer32 (1..4094) · read-only · current The VLAN ID of interface IPv4 table | |||||||||||||||||||||
| CinterfaceIpv4Mode | 1.3.6.1.4.1.10297.202.7000.2.1.7.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current the mode of network connection Static: Enable static IP address. DHCP: Enable DHCP to obtain IP information from a DHCP server on the network.
| |||||||||||||||||||||
| CinterfaceIpv4Address | 1.3.6.1.4.1.10297.202.7000.2.1.7.1.4 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current If static mode is enabled, enter IP address in this field. | |||||||||||||||||||||
| CinterfaceIpv4SubnetMask | 1.3.6.1.4.1.10297.202.7000.2.1.7.1.5 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current If static mode is enabled, enter subnet mask in this field. | |||||||||||||||||||||
| CinterfaceIpv4Gateway | 1.3.6.1.4.1.10297.202.7000.2.1.7.1.6 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current If static mode is enabled, enter gateway address in this field. | |||||||||||||||||||||
| CinterCurrIpv4DhcpState | 1.3.6.1.4.1.10297.202.7000.2.1.7.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The current status of IPv4 DHCP.
| |||||||||||||||||||||
| CinterCurrIpv4Address | 1.3.6.1.4.1.10297.202.7000.2.1.7.1.8 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current The current IPv4 address | |||||||||||||||||||||
| CinterCurrIpv4SubnetMask | 1.3.6.1.4.1.10297.202.7000.2.1.7.1.9 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current The current IPv4 subnet mask | |||||||||||||||||||||
| CinterCurrIpv4Gateway | 1.3.6.1.4.1.10297.202.7000.2.1.7.1.10 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current The current IPv4 gateway. | |||||||||||||||||||||
| Nipv6Settings | 1.3.6.1.4.1.10297.202.7000.2.2 | ||||||||||||||||||||
| SautoConfiguration | 1.3.6.1.4.1.10297.202.7000.2.2.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current IPv6 Auto Configuration state.
| |||||||||||||||||||||
| Sipv6Address | 1.3.6.1.4.1.10297.202.7000.2.2.2 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current If auto configuration mode is disabled, enter IPv6 address in this field. | |||||||||||||||||||||
| Sipv6SubnetMask | 1.3.6.1.4.1.10297.202.7000.2.2.3 | Integer32 (0..128) | RW | ||||||||||||||||||
scalar · Integer32 (0..128) · read-write · current If auto configuration mode is disabled, enter IPv6 submask in this field. | |||||||||||||||||||||
| Sipv6Gateway | 1.3.6.1.4.1.10297.202.7000.2.2.4 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current If auto configuration mode is disabled, enter IPv6 gateway address in this field. | |||||||||||||||||||||
| Sdhcpv6Client | 1.3.6.1.4.1.10297.202.7000.2.2.5 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current DHCPv6 client state
| |||||||||||||||||||||
| Tipv6InUseTable | 1.3.6.1.4.1.10297.202.7000.2.2.6 | NA | |||||||||||||||||||
table · not-accessible · current The table of in-use IPv6 address | |||||||||||||||||||||
| Ripv6InUseEntry | 1.3.6.1.4.1.10297.202.7000.2.2.6.1 | NA | |||||||||||||||||||
| Cipv6InUseIndex | 1.3.6.1.4.1.10297.202.7000.2.2.6.1.1 | Integer32 (1..32) | RO | ||||||||||||||||||
column · Integer32 (1..32) · read-only · current The current use IPv6 submask | |||||||||||||||||||||
| Cipv6InUseAddress | 1.3.6.1.4.1.10297.202.7000.2.2.6.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The current use IPv6 address | |||||||||||||||||||||
| Cipv6InUseSubnetMask | 1.3.6.1.4.1.10297.202.7000.2.2.6.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The current use IPv6 submask | |||||||||||||||||||||
| Sipv6InUseRouter | 1.3.6.1.4.1.10297.202.7000.2.2.7 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The current use IPv6 router address | |||||||||||||||||||||
| Sdhcpv6DUID | 1.3.6.1.4.1.10297.202.7000.2.2.8 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The DHCPv6 DUID | |||||||||||||||||||||
| Sdhcpv6IPAddress | 1.3.6.1.4.1.10297.202.7000.2.2.9 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The DHCPv6 IP address | |||||||||||||||||||||
| SmanagementVlan | 1.3.6.1.4.1.10297.202.7000.2.3 | Integer32 (1..4094) | RW | ||||||||||||||||||
scalar · Integer32 (1..4094) · read-write · current This allows the entry of a VLAN from which a management station will be allowed to manage the device using TCP/IP (in-band via web manager or Telnet). Management stations that are on VLANs other than the one seleted here will not be able to manage the Switch. The default management VLAN is VLAN 1. | |||||||||||||||||||||
| NsystemTime | 1.3.6.1.4.1.10297.202.7000.2.4 | ||||||||||||||||||||
| NsystemTimeSetting | 1.3.6.1.4.1.10297.202.7000.2.4.1 | ||||||||||||||||||||
| SenableSNTP | 1.3.6.1.4.1.10297.202.7000.2.4.1.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current enable or disable using SNTP server.
| |||||||||||||||||||||
| NmanualTime | 1.3.6.1.4.1.10297.202.7000.2.4.1.2 | ||||||||||||||||||||
| Syear | 1.3.6.1.4.1.10297.202.7000.2.4.1.2.1 | Integer32 (2000..2035) | RW | ||||||||||||||||||
scalar · Integer32 (2000..2035) · read-write · current The year of the switch | |||||||||||||||||||||
| Smonth | 1.3.6.1.4.1.10297.202.7000.2.4.1.2.2 | Integer32 (1..12) | RW | ||||||||||||||||||
scalar · Integer32 (1..12) · read-write · current The month of the switch | |||||||||||||||||||||
| Sday | 1.3.6.1.4.1.10297.202.7000.2.4.1.2.3 | Integer32 (1..31) | RW | ||||||||||||||||||
scalar · Integer32 (1..31) · read-write · current The day of the switch | |||||||||||||||||||||
| Shours | 1.3.6.1.4.1.10297.202.7000.2.4.1.2.4 | Integer32 (0..23) | RW | ||||||||||||||||||
scalar · Integer32 (0..23) · read-write · current The hour of the switch | |||||||||||||||||||||
| Sminutes | 1.3.6.1.4.1.10297.202.7000.2.4.1.2.5 | Integer32 (0..59) | RW | ||||||||||||||||||
scalar · Integer32 (0..59) · read-write · current The minutes of the switch | |||||||||||||||||||||
| Sseconds | 1.3.6.1.4.1.10297.202.7000.2.4.1.2.6 | Integer32 (0..59) | RW | ||||||||||||||||||
scalar · Integer32 (0..59) · read-write · current The second of the switch | |||||||||||||||||||||
| StimeZone | 1.3.6.1.4.1.10297.202.7000.2.4.1.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The UTC Timezone of the switch.
| |||||||||||||||||||||
| SdaylightSaving | 1.3.6.1.4.1.10297.202.7000.2.4.1.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current the mode of daylight saving time. Disable: Disable daylight saving time. Recurring: Using recurring mode of daylight saving time Non-Recurring: Using non-recurring mode of daylight saving time USA: Using daylight saving time in the United States that starts on the second Sunday of March and ends on the first Sunday of November European: daylight saving time in the Europe that starts on the last Sunday of March and ends on the last Sunday of November
| |||||||||||||||||||||
| SdaylightSavingOffset | 1.3.6.1.4.1.10297.202.7000.2.4.1.5 | Integer32 (1..1440) | RW | ||||||||||||||||||
scalar · Integer32 (1..1440) · read-write · current Specify the adjust offset of daylight saving time | |||||||||||||||||||||
| NrecurringFrom | 1.3.6.1.4.1.10297.202.7000.2.4.1.6 | ||||||||||||||||||||
| SrecFromDay | 1.3.6.1.4.1.10297.202.7000.2.4.1.6.1 | Integer32 (1..7) | RW | ||||||||||||||||||
scalar · Integer32 (1..7) · read-write · current The starting day of recurring daylight saving time. | |||||||||||||||||||||
| SrecFromWeek | 1.3.6.1.4.1.10297.202.7000.2.4.1.6.2 | Integer32 (1..5) | RW | ||||||||||||||||||
scalar · Integer32 (1..5) · read-write · current The starting week of recurring daylight saving time. | |||||||||||||||||||||
| SrecFromMonth | 1.3.6.1.4.1.10297.202.7000.2.4.1.6.3 | Integer32 (1..12) | RW | ||||||||||||||||||
scalar · Integer32 (1..12) · read-write · current The starting month of recurring daylight saving time. | |||||||||||||||||||||
| SrecFromHours | 1.3.6.1.4.1.10297.202.7000.2.4.1.6.4 | Integer32 (0..23) | RW | ||||||||||||||||||
scalar · Integer32 (0..23) · read-write · current The starting hour of recurring daylight saving time. | |||||||||||||||||||||
| SrecFromMinutes | 1.3.6.1.4.1.10297.202.7000.2.4.1.6.5 | Integer32 (0..59) | RW | ||||||||||||||||||
scalar · Integer32 (0..59) · read-write · current The starting minutes of recurring daylight saving time. | |||||||||||||||||||||
| NrecurringTo | 1.3.6.1.4.1.10297.202.7000.2.4.1.7 | ||||||||||||||||||||
| SrecToDay | 1.3.6.1.4.1.10297.202.7000.2.4.1.7.1 | Integer32 (1..7) | RW | ||||||||||||||||||
scalar · Integer32 (1..7) · read-write · current The ending day of recurring daylight saving time. | |||||||||||||||||||||
| SrecToWeek | 1.3.6.1.4.1.10297.202.7000.2.4.1.7.2 | Integer32 (1..5) | RW | ||||||||||||||||||
scalar · Integer32 (1..5) · read-write · current The ending week of recurring daylight saving time. | |||||||||||||||||||||
| SrecToMonth | 1.3.6.1.4.1.10297.202.7000.2.4.1.7.3 | Integer32 (1..12) | RW | ||||||||||||||||||
scalar · Integer32 (1..12) · read-write · current The ending month of recurring daylight saving time. | |||||||||||||||||||||
| SrecToHours | 1.3.6.1.4.1.10297.202.7000.2.4.1.7.4 | Integer32 (0..23) | RW | ||||||||||||||||||
scalar · Integer32 (0..23) · read-write · current The ending hour of recurring daylight saving time. | |||||||||||||||||||||
| SrecToMinutes | 1.3.6.1.4.1.10297.202.7000.2.4.1.7.5 | Integer32 (0..59) | RW | ||||||||||||||||||
scalar · Integer32 (0..59) · read-write · current The ending minute of recurring daylight saving time. | |||||||||||||||||||||
| NnonRecurringFrom | 1.3.6.1.4.1.10297.202.7000.2.4.1.8 | ||||||||||||||||||||
| SnonRecFromYear | 1.3.6.1.4.1.10297.202.7000.2.4.1.8.1 | Integer32 (2000..2037) | RW | ||||||||||||||||||
scalar · Integer32 (2000..2037) · read-write · current The starting year of non-recurring daylight saving time. | |||||||||||||||||||||
| SnonRecFromMonth | 1.3.6.1.4.1.10297.202.7000.2.4.1.8.2 | Integer32 (1..12) | RW | ||||||||||||||||||
scalar · Integer32 (1..12) · read-write · current The starting month of non-recurring daylight saving time. | |||||||||||||||||||||
| SnonRecFromDay | 1.3.6.1.4.1.10297.202.7000.2.4.1.8.3 | Integer32 (1..31) | RW | ||||||||||||||||||
scalar · Integer32 (1..31) · read-write · current The starting day of non-recurring daylight saving time. | |||||||||||||||||||||
| SnonRecFromHours | 1.3.6.1.4.1.10297.202.7000.2.4.1.8.4 | Integer32 (0..23) | RW | ||||||||||||||||||
scalar · Integer32 (0..23) · read-write · current The starting hour of non-recurring daylight saving time. | |||||||||||||||||||||
| SnonRecFromMinutes | 1.3.6.1.4.1.10297.202.7000.2.4.1.8.5 | Integer32 (0..59) | RW | ||||||||||||||||||
scalar · Integer32 (0..59) · read-write · current The starting minute of non-recurring daylight saving time. | |||||||||||||||||||||
| NnonRecurringTo | 1.3.6.1.4.1.10297.202.7000.2.4.1.9 | ||||||||||||||||||||
| SnonRecToYear | 1.3.6.1.4.1.10297.202.7000.2.4.1.9.1 | Integer32 (2000..2037) | RW | ||||||||||||||||||
scalar · Integer32 (2000..2037) · read-write · current The ending year of non-recurring daylight saving time. | |||||||||||||||||||||
| SnonRecToMonth | 1.3.6.1.4.1.10297.202.7000.2.4.1.9.2 | Integer32 (1..12) | RW | ||||||||||||||||||
scalar · Integer32 (1..12) · read-write · current The ending month of non-recurring daylight saving time. | |||||||||||||||||||||
| SnonRecToDay | 1.3.6.1.4.1.10297.202.7000.2.4.1.9.3 | Integer32 (1..31) | RW | ||||||||||||||||||
scalar · Integer32 (1..31) · read-write · current The ending day of non-recurring daylight saving time. | |||||||||||||||||||||
| SnonRecToHours | 1.3.6.1.4.1.10297.202.7000.2.4.1.9.4 | Integer32 (0..23) | RW | ||||||||||||||||||
scalar · Integer32 (0..23) · read-write · current The ending hour of non-recurring daylight saving time. | |||||||||||||||||||||
| SnonRecToMinutes | 1.3.6.1.4.1.10297.202.7000.2.4.1.9.5 | Integer32 (0..59) | RW | ||||||||||||||||||
scalar · Integer32 (0..59) · read-write · current The ending minute of non-recurring daylight saving time. | |||||||||||||||||||||
| SserverAddress | 1.3.6.1.4.1.10297.202.7000.2.4.1.10 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current IP address or hostname of time server | |||||||||||||||||||||
| SserverPort | 1.3.6.1.4.1.10297.202.7000.2.4.1.11 | Integer32 (1..65535) | RW | ||||||||||||||||||
scalar · Integer32 (1..65535) · read-write · current Time server port number | |||||||||||||||||||||
| SsystemTimeStatus | 1.3.6.1.4.1.10297.202.7000.2.4.1.12 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current If user set system time with SNMP, the value sould not apply to switch. They need to set active(1) to apply into switch
| |||||||||||||||||||||
| NsystemTimeInfo | 1.3.6.1.4.1.10297.202.7000.2.4.2 | ||||||||||||||||||||
| ScurrentDateTime | 1.3.6.1.4.1.10297.202.7000.2.4.2.1 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current Current Date and Time on the device. | |||||||||||||||||||||
| ScurrentSNTP | 1.3.6.1.4.1.10297.202.7000.2.4.2.2 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The status of SNTP server.
| |||||||||||||||||||||
| ScurrentSNTPServerAddr | 1.3.6.1.4.1.10297.202.7000.2.4.2.3 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The IP address or hostname of SNTP server. | |||||||||||||||||||||
| ScurrentSNTPServerPort | 1.3.6.1.4.1.10297.202.7000.2.4.2.4 | Integer32 (1..65535) | RO | ||||||||||||||||||
scalar · Integer32 (1..65535) · read-only · current The port number of SNTP server. | |||||||||||||||||||||
| ScurrentTimeZone | 1.3.6.1.4.1.10297.202.7000.2.4.2.5 | DisplayString | RO | ||||||||||||||||||
| ScurrentDaylightSavingStatus | 1.3.6.1.4.1.10297.202.7000.2.4.2.6 | DisplayString | RO | ||||||||||||||||||
| ScurrentDaylightSavingOffset | 1.3.6.1.4.1.10297.202.7000.2.4.2.7 | DisplayString | RO | ||||||||||||||||||
| ScurrentDaylightSavingFrom | 1.3.6.1.4.1.10297.202.7000.2.4.2.8 | DisplayString | RO | ||||||||||||||||||
| ScurrentDaylightSavingTo | 1.3.6.1.4.1.10297.202.7000.2.4.2.9 | DisplayString | RO | ||||||||||||||||||
| Nsfp | 1.3.6.1.4.1.10297.202.7000.2.5 | ||||||||||||||||||||
| TsfpSerialInfoTable | 1.3.6.1.4.1.10297.202.7000.2.5.1 | NA | |||||||||||||||||||
table · not-accessible · current The table of SFP serial info. | |||||||||||||||||||||
| RsfpSerialInfoEntry | 1.3.6.1.4.1.10297.202.7000.2.5.1.1 | NA | |||||||||||||||||||
| CsfpPortIndex | 1.3.6.1.4.1.10297.202.7000.2.5.1.1.1 | DisplayString | RO | GE8 | |||||||||||||||||
column · DisplayString · read-only · current The index of SFP serial info. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpConnector | 1.3.6.1.4.1.10297.202.7000.2.5.1.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The SFP connector | |||||||||||||||||||||
| CsfpSpeed | 1.3.6.1.4.1.10297.202.7000.2.5.1.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The SFP speed | |||||||||||||||||||||
| CsfpVendorName | 1.3.6.1.4.1.10297.202.7000.2.5.1.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The SFP vender name | |||||||||||||||||||||
| CsfpVendorPn | 1.3.6.1.4.1.10297.202.7000.2.5.1.1.6 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The SFP vendor product number | |||||||||||||||||||||
| CspfVendorRev | 1.3.6.1.4.1.10297.202.7000.2.5.1.1.7 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The SFP vender revision | |||||||||||||||||||||
| CsfpVendorSn | 1.3.6.1.4.1.10297.202.7000.2.5.1.1.8 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The SFP vendor serial number | |||||||||||||||||||||
| CsfpDateCode | 1.3.6.1.4.1.10297.202.7000.2.5.1.1.9 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The SFP data code | |||||||||||||||||||||
| TsfpDMIInfoTable | 1.3.6.1.4.1.10297.202.7000.2.5.2 | NA | |||||||||||||||||||
table · not-accessible · current The table of SFP DMI info. | |||||||||||||||||||||
| RsfpDMIInfoEntry | 1.3.6.1.4.1.10297.202.7000.2.5.2.1 | NA | |||||||||||||||||||
| CsfpDMIPortIndex | 1.3.6.1.4.1.10297.202.7000.2.5.2.1.1 | DisplayString | RO | GE25 | |||||||||||||||||
column · DisplayString · read-only · current The index of SFP DMI info. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMITemperature | 1.3.6.1.4.1.10297.202.7000.2.5.2.1.2 | DisplayString | RO | 33.953 | |||||||||||||||||
column · DisplayString · read-only · current The SFP DMI temperature
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMIVoltage | 1.3.6.1.4.1.10297.202.7000.2.5.2.1.3 | DisplayString | RO | 3.280 | |||||||||||||||||
column · DisplayString · read-only · current The SFP DMI voltage
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMITxBias | 1.3.6.1.4.1.10297.202.7000.2.5.2.1.4 | DisplayString | RO | 19.750 | |||||||||||||||||
column · DisplayString · read-only · current The SFP DMI Tx bias
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMITxPower | 1.3.6.1.4.1.10297.202.7000.2.5.2.1.5 | DisplayString | RO | -6.140 | |||||||||||||||||
column · DisplayString · read-only · current The SFP DMI Tx power
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMIRxPower | 1.3.6.1.4.1.10297.202.7000.2.5.2.1.6 | DisplayString | RO | -4.556 | |||||||||||||||||
column · DisplayString · read-only · current The SFP DMI Rx power
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SddmDiagnosticAlarm | 1.3.6.1.4.1.10297.202.7000.2.5.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The DDM diagnostic alarm setting
| |||||||||||||||||||||
| TsfpDMIAlarmInfoTable | 1.3.6.1.4.1.10297.202.7000.2.5.4 | NA | |||||||||||||||||||
table · not-accessible · current The table of SFP DMI alarm info. | |||||||||||||||||||||
| RsfpDMIAlarmInfoEntry | 1.3.6.1.4.1.10297.202.7000.2.5.4.1 | NA | |||||||||||||||||||
| CsfpDMIAlarmPortIndex | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.1 | DisplayString | RO | GE25 | |||||||||||||||||
column · DisplayString · read-only · current The index of SFP DMI alarm info. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMITempHighAlarmState | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.2 | INTEGER | RW | disabled(2) | |||||||||||||||||
column · INTEGER · read-write · current The state of SFP DMI temperature high alarm
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMITempHighAlarmValue | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.3 | DisplayString | RW | 95.000 | |||||||||||||||||
column · DisplayString · read-write · current The value of SFP DMI temperature high alarm. The value range is 127 Degrees C ~ -127 Degrees C
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMITempHighWarnState | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.4 | INTEGER | RW | disabled(2) | |||||||||||||||||
column · INTEGER · read-write · current The state of SFP DMI temperature high warning
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMITempHighWarnValue | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.5 | DisplayString | RW | 90.000 | |||||||||||||||||
column · DisplayString · read-write · current The value of SFP DMI temperature high warning. The value range is 127 Degrees C ~ -127 Degrees C
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMITempLowAlarmState | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.6 | INTEGER | RW | disabled(2) | |||||||||||||||||
column · INTEGER · read-write · current The state of SFP DMI temperature low alarm
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMITempLowAlarmValue | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.7 | DisplayString | RW | -50.000 | |||||||||||||||||
column · DisplayString · read-write · current The value of SFP DMI temperature low alarm. The value range is 127 Degrees C ~ -127 Degrees C
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMITempLowWarnState | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.8 | INTEGER | RW | disabled(2) | |||||||||||||||||
column · INTEGER · read-write · current The state of SFP DMI temperature low warning
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMITempLowWarnValue | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.9 | DisplayString | RW | -45.000 | |||||||||||||||||
column · DisplayString · read-write · current The value of SFP DMI temperature low warning. The value range is 127 Degrees C ~ -127 Degrees C
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMIVoltageHighAlarmState | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.10 | INTEGER | RW | disabled(2) | |||||||||||||||||
column · INTEGER · read-write · current The state of SFP DMI voltage high alarm
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMIVoltageHighAlarmValue | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.11 | DisplayString | RW | 3.500 | |||||||||||||||||
column · DisplayString · read-write · current The value of SFP DMI voltage high alarm. The value range is 0.001~6V
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMIVoltageHighWarnState | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.12 | INTEGER | RW | disabled(2) | |||||||||||||||||
column · INTEGER · read-write · current The state of SFP DMI voltage high warning
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMIVoltageHighWarnValue | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.13 | DisplayString | RW | 3.450 | |||||||||||||||||
column · DisplayString · read-write · current The value of SFP DMI voltage high warning. The value range is 0.001~6V
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMIVoltageLowAlarmState | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.14 | INTEGER | RW | disabled(2) | |||||||||||||||||
column · INTEGER · read-write · current The state of SFP DMI voltage low alarm
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMIVoltageLowAlarmValue | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.15 | DisplayString | RW | 3.100 | |||||||||||||||||
column · DisplayString · read-write · current The value of SFP DMI voltage low alarm. The value range is 0.001~6V
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMIVoltageLowWarnState | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.16 | INTEGER | RW | disabled(2) | |||||||||||||||||
column · INTEGER · read-write · current The state of SFP DMI voltage low warning
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMIVoltageLowWarnValue | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.17 | DisplayString | RW | 3.150 | |||||||||||||||||
column · DisplayString · read-write · current The value of SFP DMI voltage low warning. The value range is 0.001~6V
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMITxBasisHighAlarmState | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.18 | INTEGER | RW | disabled(2) | |||||||||||||||||
column · INTEGER · read-write · current The state of SFP DMI TX Basis high alarm
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMITxBasisHighAlarmValue | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.19 | DisplayString | RW | 100.000 | |||||||||||||||||
column · DisplayString · read-write · current The value of SFP DMI TX Basis high alarm. The value range is 1~131mA
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMITxBasisHighWarnState | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.20 | INTEGER | RW | disabled(2) | |||||||||||||||||
column · INTEGER · read-write · current The state of SFP DMI TX Basis high warning
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMITxBasisHighWarnValue | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.21 | DisplayString | RW | 90.000 | |||||||||||||||||
column · DisplayString · read-write · current The value of SFP DMI TX Basis high warning. The value range is 1~131mA
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMITxBasisLowAlarmState | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.22 | INTEGER | RW | disabled(2) | |||||||||||||||||
column · INTEGER · read-write · current The state of SFP DMI TX Basis low alarm
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMITxBasisLowAlarmValue | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.23 | DisplayString | RW | 6.000 | |||||||||||||||||
column · DisplayString · read-write · current The value of SFP DMI TX Basis low alarm. The value range is 1~131mA
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMITxBasisLowWarnState | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.24 | INTEGER | RW | disabled(2) | |||||||||||||||||
column · INTEGER · read-write · current The state of SFP DMI TX Basis low warning
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMITxBasisLowWarnValue | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.25 | DisplayString | RW | 7.000 | |||||||||||||||||
column · DisplayString · read-write · current The value of SFP DMI TX Basis low warning. The value range is 1~131mA
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMITxPowerHighAlarmState | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.26 | INTEGER | RW | disabled(2) | |||||||||||||||||
column · INTEGER · read-write · current The state of SFP DMI TX power high alarm
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMITxPowerHighAlarmValue | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.27 | DisplayString | RW | -1.000 | |||||||||||||||||
column · DisplayString · read-write · current The value of SFP DMI TX power high alarm. The value range is 8~-39dbm
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMITxPowerHighWarnState | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.28 | INTEGER | RW | disabled(2) | |||||||||||||||||
column · INTEGER · read-write · current The state of SFP DMI TX power high warning
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMITxPowerHighWarnValue | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.29 | DisplayString | RW | -5.000 | |||||||||||||||||
column · DisplayString · read-write · current The value of SFP DMI TX power high warning. The value range is 8~-39dbm
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMITxPowerLowAlarmState | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.30 | INTEGER | RW | disabled(2) | |||||||||||||||||
column · INTEGER · read-write · current The state of SFP DMI TX power low alarm
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMITxPowerLowAlarmValue | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.31 | DisplayString | RW | -35.000 | |||||||||||||||||
column · DisplayString · read-write · current The value of SFP DMI TX power low alarm. The value range is 8~-39dbm
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMITxPowerLowWarnState | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.32 | INTEGER | RW | disabled(2) | |||||||||||||||||
column · INTEGER · read-write · current The state of SFP DMI TX power low warning
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMITxPowerLowWarnValue | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.33 | DisplayString | RW | -30.000 | |||||||||||||||||
column · DisplayString · read-write · current The value of SFP DMI TX power low warning. The value range is 8~-39dbm
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMIRxPowerHighAlarmState | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.34 | INTEGER | RW | disabled(2) | |||||||||||||||||
column · INTEGER · read-write · current The state of SFP DMI RX power high alarm
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMIRxPowerHighAlarmValue | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.35 | DisplayString | RW | -1.000 | |||||||||||||||||
column · DisplayString · read-write · current The value of SFP DMI RX power high alarm. The value range is 8~-39dbm
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMIRxPowerHighWarnState | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.36 | INTEGER | RW | disabled(2) | |||||||||||||||||
column · INTEGER · read-write · current The state of SFP DMI RX power high warning
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMIRxPowerHighWarnValue | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.37 | DisplayString | RW | -5.000 | |||||||||||||||||
column · DisplayString · read-write · current The value of SFP DMI RX power high warning. The value range is 8~-39dbm
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMIRxPowerLowAlarmState | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.38 | INTEGER | RW | disabled(2) | |||||||||||||||||
column · INTEGER · read-write · current The state of SFP DMI RX power low alarm
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMIRxPowerLowAlarmValue | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.39 | DisplayString | RW | -35.000 | |||||||||||||||||
column · DisplayString · read-write · current The value of SFP DMI RX power low alarm. The value range is 8~-39dbm
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMIRxPowerLowWarnState | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.40 | INTEGER | RW | disabled(2) | |||||||||||||||||
column · INTEGER · read-write · current The state of SFP DMI RX power low warning
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsfpDMIRxPowerLowWarnValue | 1.3.6.1.4.1.10297.202.7000.2.5.4.1.41 | DisplayString | RW | -30.000 | |||||||||||||||||
column · DisplayString · read-write · current The value of SFP DMI RX power low warning. The value range is 8~-39dbm
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NdhcpClientOpt82 | 1.3.6.1.4.1.10297.202.7000.2.6 | ||||||||||||||||||||
| SdhcpClientOpt82Status | 1.3.6.1.4.1.10297.202.7000.2.6.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current
| |||||||||||||||||||||
| SdhcpClientOpt82CircuitIDFormat | 1.3.6.1.4.1.10297.202.7000.2.6.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current
| |||||||||||||||||||||
| SdhcpClientOpt82CircuitIDString | 1.3.6.1.4.1.10297.202.7000.2.6.3 | DisplayString | RW | ||||||||||||||||||
| SdhcpClientOpt82CircuitIDHex | 1.3.6.1.4.1.10297.202.7000.2.6.4 | DisplayString | RW | ||||||||||||||||||
| SdhcpClientOpt82CircuitIDUserDefine | 1.3.6.1.4.1.10297.202.7000.2.6.5 | DisplayString | RW | ||||||||||||||||||
| SdhcpClientOpt82RemoteIDFormat | 1.3.6.1.4.1.10297.202.7000.2.6.6 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current
| |||||||||||||||||||||
| SdhcpClientOpt82RemoteIDString | 1.3.6.1.4.1.10297.202.7000.2.6.7 | DisplayString | RW | ||||||||||||||||||
| SdhcpClientOpt82RemoteIDHex | 1.3.6.1.4.1.10297.202.7000.2.6.8 | DisplayString | RW | ||||||||||||||||||
| SdhcpClientOpt82RemoteIDUserDefine | 1.3.6.1.4.1.10297.202.7000.2.6.9 | DisplayString | RW | ||||||||||||||||||
| NnetworkPort | 1.3.6.1.4.1.10297.202.7000.2.7 | ||||||||||||||||||||
| ShttpNetworkPort | 1.3.6.1.4.1.10297.202.7000.2.7.1 | Integer32 (1..65535) | RW | ||||||||||||||||||
scalar · Integer32 (1..65535) · read-write · current The network port of http. | |||||||||||||||||||||
| ShttpsNetworkPort | 1.3.6.1.4.1.10297.202.7000.2.7.2 | Integer32 (1..65535) | RW | ||||||||||||||||||
scalar · Integer32 (1..65535) · read-write · current The network port of https. | |||||||||||||||||||||
| StelnetNetworkPort | 1.3.6.1.4.1.10297.202.7000.2.7.3 | Integer32 (1..65535) | RW | ||||||||||||||||||
scalar · Integer32 (1..65535) · read-write · current The network port of telnet. | |||||||||||||||||||||
| SsshNetworkPort | 1.3.6.1.4.1.10297.202.7000.2.7.4 | Integer32 (1..65535) | RW | ||||||||||||||||||
scalar · Integer32 (1..65535) · read-write · current The network port of ssh. | |||||||||||||||||||||
| Nl2switching | 1.3.6.1.4.1.10297.202.7000.3 | ||||||||||||||||||||
| NportSetting | 1.3.6.1.4.1.10297.202.7000.3.1 | ||||||||||||||||||||
| TportSettingTable | 1.3.6.1.4.1.10297.202.7000.3.1.1 | NA | |||||||||||||||||||
table · not-accessible · current The table of port setting. | |||||||||||||||||||||
| RportSettingEntry | 1.3.6.1.4.1.10297.202.7000.3.1.1.1 | NA | |||||||||||||||||||
| CportSettingIndex | 1.3.6.1.4.1.10297.202.7000.3.1.1.1.1 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current The index of port setting. | |||||||||||||||||||||
| Cdescription | 1.3.6.1.4.1.10297.202.7000.3.1.1.1.2 | DisplayString | RW | test 1 | |||||||||||||||||
column · DisplayString · read-write · current Port description Example values from LibreNMS test devices
| |||||||||||||||||||||
| CenableState | 1.3.6.1.4.1.10297.202.7000.3.1.1.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Port admin state
| |||||||||||||||||||||
| ClinkStatus | 1.3.6.1.4.1.10297.202.7000.3.1.1.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Port link status
| |||||||||||||||||||||
| Cspeed | 1.3.6.1.4.1.10297.202.7000.3.1.1.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Port speed capabilities
| |||||||||||||||||||||
| Cduplex | 1.3.6.1.4.1.10297.202.7000.3.1.1.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Port duplex capabilities
| |||||||||||||||||||||
| CflowControlConfig | 1.3.6.1.4.1.10297.202.7000.3.1.1.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Port flow control setting
| |||||||||||||||||||||
| CflowControlStatus | 1.3.6.1.4.1.10297.202.7000.3.1.1.1.8 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Port flow control status
| |||||||||||||||||||||
| Nmirror | 1.3.6.1.4.1.10297.202.7000.3.2 | ||||||||||||||||||||
| TmirrorTable | 1.3.6.1.4.1.10297.202.7000.3.2.1 | NA | |||||||||||||||||||
table · not-accessible · current The table of mirror funciton | |||||||||||||||||||||
| RmirrorEntry | 1.3.6.1.4.1.10297.202.7000.3.2.1.1 | NA | |||||||||||||||||||
| CsessionId | 1.3.6.1.4.1.10297.202.7000.3.2.1.1.1 | Integer32 (1..4) | RO | ||||||||||||||||||
column · Integer32 (1..4) · read-only · current Mirror session ID | |||||||||||||||||||||
| CmonitorSessionState | 1.3.6.1.4.1.10297.202.7000.3.2.1.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Mirror session state
| |||||||||||||||||||||
| CdestinationPort | 1.3.6.1.4.1.10297.202.7000.3.2.1.1.3 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current Mirror session destination port | |||||||||||||||||||||
| CingressState | 1.3.6.1.4.1.10297.202.7000.3.2.1.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Destination port ingress state
| |||||||||||||||||||||
| CsourceTxPort | 1.3.6.1.4.1.10297.202.7000.3.2.1.1.5 | Bits | RW | ||||||||||||||||||
column · Bits · read-write · current Mirror session source tx ports only select portbased-enabled state.
| |||||||||||||||||||||
| CsourceRxPort | 1.3.6.1.4.1.10297.202.7000.3.2.1.1.6 | Bits | RW | ||||||||||||||||||
column · Bits · read-write · current Mirror session source rx ports only select portbased-enabled state
| |||||||||||||||||||||
| Nlag | 1.3.6.1.4.1.10297.202.7000.3.3 | ||||||||||||||||||||
| SloadBalanceAlgorithm | 1.3.6.1.4.1.10297.202.7000.3.3.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current LAG load balance distribution algorithm. MAC Address: Based on source and destination MAC address for all packets IP/MAC Address: Based on source and destination IP addresses for IP packet, and source and destination MAC address for non-IP packets. Source Port: Based on Source Port for all packets.
| |||||||||||||||||||||
| TlagManagementTable | 1.3.6.1.4.1.10297.202.7000.3.3.2 | NA | |||||||||||||||||||
table · not-accessible · current The table of LAG management | |||||||||||||||||||||
| RlagManagementEntry | 1.3.6.1.4.1.10297.202.7000.3.3.2.1 | NA | |||||||||||||||||||
| ClagIndex | 1.3.6.1.4.1.10297.202.7000.3.3.2.1.1 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current The index of LAG management | |||||||||||||||||||||
| ClagName | 1.3.6.1.4.1.10297.202.7000.3.3.2.1.2 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current LAG port name | |||||||||||||||||||||
| ClagType | 1.3.6.1.4.1.10297.202.7000.3.3.2.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current the type of the LAG Static: The group of ports assigned to a static LAG are always active members. LACP: The group of ports assigned to dynamic LAG are candidate ports. LACP determines which candidate ports are active member ports.
| |||||||||||||||||||||
| ClagPorts | 1.3.6.1.4.1.10297.202.7000.3.3.2.1.4 | Bits | RW | ||||||||||||||||||
column · Bits · read-write · current the trunk member ports in this field
| |||||||||||||||||||||
| ClagLinkState | 1.3.6.1.4.1.10297.202.7000.3.3.2.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current LAG port link status
| |||||||||||||||||||||
| ClagActiveMember | 1.3.6.1.4.1.10297.202.7000.3.3.2.1.6 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Active member ports of the LAG | |||||||||||||||||||||
| ClagStandbyMember | 1.3.6.1.4.1.10297.202.7000.3.3.2.1.7 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Inactive or candidate member ports of the LAG | |||||||||||||||||||||
| TlagPortTable | 1.3.6.1.4.1.10297.202.7000.3.3.3 | NA | |||||||||||||||||||
table · not-accessible · current The table of LAG port | |||||||||||||||||||||
| RlagPortEntry | 1.3.6.1.4.1.10297.202.7000.3.3.3.1 | NA | |||||||||||||||||||
| ClagPortIndex | 1.3.6.1.4.1.10297.202.7000.3.3.3.1.1 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current The index of LAG port | |||||||||||||||||||||
| ClagPortDescription | 1.3.6.1.4.1.10297.202.7000.3.3.3.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The description of the LAG port | |||||||||||||||||||||
| ClagPortType | 1.3.6.1.4.1.10297.202.7000.3.3.3.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Member port media type | |||||||||||||||||||||
| ClagPortEnableState | 1.3.6.1.4.1.10297.202.7000.3.3.3.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current LAG port admin state
| |||||||||||||||||||||
| ClagPortLinkStatus | 1.3.6.1.4.1.10297.202.7000.3.3.3.1.5 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current LAG port link status
| |||||||||||||||||||||
| ClagPortSpeed | 1.3.6.1.4.1.10297.202.7000.3.3.3.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Current LAG port speed
| |||||||||||||||||||||
| ClagPortDuplex | 1.3.6.1.4.1.10297.202.7000.3.3.3.1.7 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Current LAG port duplex
| |||||||||||||||||||||
| ClagPortFlowCtrlConfig | 1.3.6.1.4.1.10297.202.7000.3.3.3.1.8 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current LAG port flow control configuration
| |||||||||||||||||||||
| ClagPortFlowCtrlStatus | 1.3.6.1.4.1.10297.202.7000.3.3.3.1.9 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Current LAG port flow control state
| |||||||||||||||||||||
| SlacpSystemPriority | 1.3.6.1.4.1.10297.202.7000.3.3.4 | Integer32 (1..65535) | RW | ||||||||||||||||||
scalar · Integer32 (1..65535) · read-write · current Configure the system priority of LACP | |||||||||||||||||||||
| TlacpPortTable | 1.3.6.1.4.1.10297.202.7000.3.3.5 | NA | |||||||||||||||||||
table · not-accessible · current The table of LACP Port | |||||||||||||||||||||
| RlacpPortEntry | 1.3.6.1.4.1.10297.202.7000.3.3.5.1 | NA | |||||||||||||||||||
| ClacpPortIndex | 1.3.6.1.4.1.10297.202.7000.3.3.5.1.1 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current The index of LACP Port | |||||||||||||||||||||
| ClacpPriority | 1.3.6.1.4.1.10297.202.7000.3.3.5.1.2 | Integer32 (1..65535) | RW | ||||||||||||||||||
column · Integer32 (1..65535) · read-write · current LACP priority of the port | |||||||||||||||||||||
| ClacpTimeout | 1.3.6.1.4.1.10297.202.7000.3.3.5.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The periodic transmissions of LACP PDUs Long: Transmit LACP PDU with slow periodic (30s). Short: Transmit LACPP DU with fast periodic (1s).
| |||||||||||||||||||||
| ClacpPortMode | 1.3.6.1.4.1.10297.202.7000.3.3.5.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current LACP mode of the port
| |||||||||||||||||||||
| Nvlan | 1.3.6.1.4.1.10297.202.7000.3.4 | ||||||||||||||||||||
| TvlanTable | 1.3.6.1.4.1.10297.202.7000.3.4.1 | NA | |||||||||||||||||||
table · not-accessible · current The table of VLAN | |||||||||||||||||||||
| RvlanEntry | 1.3.6.1.4.1.10297.202.7000.3.4.1.1 | NA | |||||||||||||||||||
| CvlanIndex | 1.3.6.1.4.1.10297.202.7000.3.4.1.1.1 | Integer32 (1..4094) | RW | ||||||||||||||||||
column · Integer32 (1..4094) · read-write · current The index of VLAN | |||||||||||||||||||||
| CvlanId | 1.3.6.1.4.1.10297.202.7000.3.4.1.1.2 | Integer32 (1..4094) | RW | ||||||||||||||||||
column · Integer32 (1..4094) · read-write · current The VLAN ID | |||||||||||||||||||||
| CvlanNamePrefix | 1.3.6.1.4.1.10297.202.7000.3.4.1.1.3 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The prefix string of the VLAN name | |||||||||||||||||||||
| CvlanType | 1.3.6.1.4.1.10297.202.7000.3.4.1.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The VLAN type
| |||||||||||||||||||||
| CvlanRowStatus | 1.3.6.1.4.1.10297.202.7000.3.4.1.1.99 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current User can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
| |||||||||||||||||||||
| TvlanInterfaceTable | 1.3.6.1.4.1.10297.202.7000.3.4.2 | NA | |||||||||||||||||||
table · not-accessible · current The table of the VLN inetrface | |||||||||||||||||||||
| RvlanInterfaceEntry | 1.3.6.1.4.1.10297.202.7000.3.4.2.1 | NA | |||||||||||||||||||
| CvlanPortIndex | 1.3.6.1.4.1.10297.202.7000.3.4.2.1.1 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current The port index of the VLAN interface | |||||||||||||||||||||
| CvlanInterfaceVlanMode | 1.3.6.1.4.1.10297.202.7000.3.4.2.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current VLAN mode for the interface. Hybrid: support all functions as defined in IEEE 802.1Q Access: Accepts only untagged frames and join an untagged VLAN Trunk: An ubtagged member of one VLAN at most, and is a tagged member of zero or more VLANs. Tunnel: Port-based Q-in-Q mode
| |||||||||||||||||||||
| CvlanPvid | 1.3.6.1.4.1.10297.202.7000.3.4.2.1.3 | Integer32 (1..4094) | RW | ||||||||||||||||||
column · Integer32 (1..4094) · read-write · current The port-based VLAN ID, It only available with Hybrid and Trunk mode. | |||||||||||||||||||||
| CvlanAcceptedType | 1.3.6.1.4.1.10297.202.7000.3.4.2.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current the acceptable-frame-type of the specified interfaces. It is only available with Hybrid mode.
| |||||||||||||||||||||
| CvlanIngressFiltering | 1.3.6.1.4.1.10297.202.7000.3.4.2.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current the status of ingress filtering. It is only available with Hybrid mode.
| |||||||||||||||||||||
| TportToVlanTable | 1.3.6.1.4.1.10297.202.7000.3.4.3 | NA | |||||||||||||||||||
table · not-accessible · current The table of Port to VLAN | |||||||||||||||||||||
| RportToVlanEntry | 1.3.6.1.4.1.10297.202.7000.3.4.3.1 | NA | |||||||||||||||||||
| CportToVlanVlanIndex | 1.3.6.1.4.1.10297.202.7000.3.4.3.1.1 | Integer32 (1..4094) | RO | ||||||||||||||||||
column · Integer32 (1..4094) · read-only · current The index of Port to VLAN | |||||||||||||||||||||
| CportToVlanPortIndex | 1.3.6.1.4.1.10297.202.7000.3.4.3.1.2 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current The port index of Port to VLAN | |||||||||||||||||||||
| CportToVlanVlanId | 1.3.6.1.4.1.10297.202.7000.3.4.3.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current VLAN ID | |||||||||||||||||||||
| CportToVlanInterfaceVlanMode | 1.3.6.1.4.1.10297.202.7000.3.4.3.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Display the interface VLAN mode of this port
| |||||||||||||||||||||
| CportToVlanMembership | 1.3.6.1.4.1.10297.202.7000.3.4.3.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current the membership for this port with the specified VLAN ID. Forbidden: Specify the port is forbidden in the VLAN. Excluded: Specify the port is excluded in the VLAN. Tagged: Specify the port is tagged in the VLAN. Untagged: Specify the port is untagged in the VLAN.
| |||||||||||||||||||||
| CportToVlanPvid | 1.3.6.1.4.1.10297.202.7000.3.4.3.1.6 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current the VLAN ID to be the port-based VLAN ID for this port.
| |||||||||||||||||||||
| TportVlanTable | 1.3.6.1.4.1.10297.202.7000.3.4.4 | NA | |||||||||||||||||||
table · not-accessible · current The table of port VLAN | |||||||||||||||||||||
| RportVlanEntry | 1.3.6.1.4.1.10297.202.7000.3.4.4.1 | NA | |||||||||||||||||||
| CportVlanPortIndex | 1.3.6.1.4.1.10297.202.7000.3.4.4.1.1 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current The port index of port VLAN | |||||||||||||||||||||
| CportVlanPortMode | 1.3.6.1.4.1.10297.202.7000.3.4.4.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current the interface VLAN mode of this port
| |||||||||||||||||||||
| CportVlanAdminVlans | 1.3.6.1.4.1.10297.202.7000.3.4.4.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current the administrative VLAN list of this port | |||||||||||||||||||||
| CportVlanOperVlans | 1.3.6.1.4.1.10297.202.7000.3.4.4.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The operational VLAN list of this port | |||||||||||||||||||||
| NvoiceVlan | 1.3.6.1.4.1.10297.202.7000.3.4.5 | ||||||||||||||||||||
| SvoiceVlanState | 1.3.6.1.4.1.10297.202.7000.3.4.5.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Voice VLAN state
| |||||||||||||||||||||
| SvoiceVlanId | 1.3.6.1.4.1.10297.202.7000.3.4.5.2 | Integer32 (1..4094) | RW | ||||||||||||||||||
scalar · Integer32 (1..4094) · read-write · current Voice VLAN ID | |||||||||||||||||||||
| SvoiceVlanRemarkCos-8021p | 1.3.6.1.4.1.10297.202.7000.3.4.5.3 | Integer32 (0..7) | RW | ||||||||||||||||||
scalar · Integer32 (0..7) · read-write · current a value of vpt that will be advertised by LLDP-MED | |||||||||||||||||||||
| SvoiceVlanRemark1q | 1.3.6.1.4.1.10297.202.7000.3.4.5.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current 1p remark state
| |||||||||||||||||||||
| SvoiceVlanAgingTime | 1.3.6.1.4.1.10297.202.7000.3.4.5.5 | Integer32 (30..65535) | RW | ||||||||||||||||||
scalar · Integer32 (30..65535) · read-write · current value of aging time | |||||||||||||||||||||
| TtelephonyOUITable | 1.3.6.1.4.1.10297.202.7000.3.4.5.6 | NA | |||||||||||||||||||
table · not-accessible · current The table of OUI | |||||||||||||||||||||
| RtelephonyOUIEntry | 1.3.6.1.4.1.10297.202.7000.3.4.5.6.1 | NA | |||||||||||||||||||
| CtelephonyOUIIndex | 1.3.6.1.4.1.10297.202.7000.3.4.5.6.1.1 | Integer32 (1..16) | RO | ||||||||||||||||||
column · Integer32 (1..16) · read-only · current The index of OUI | |||||||||||||||||||||
| CtelephonyOUIAddress | 1.3.6.1.4.1.10297.202.7000.3.4.5.6.1.2 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current oui address | |||||||||||||||||||||
| CtelephonyOUIDescription | 1.3.6.1.4.1.10297.202.7000.3.4.5.6.1.3 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current description of the specified MAC address to the voice VLAN OUI table | |||||||||||||||||||||
| CtelephonyOUIRowStatus | 1.3.6.1.4.1.10297.202.7000.3.4.5.6.1.99 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current User can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
| |||||||||||||||||||||
| TtelephonyOUIPortTable | 1.3.6.1.4.1.10297.202.7000.3.4.5.7 | NA | |||||||||||||||||||
table · not-accessible · current The table of OUI port | |||||||||||||||||||||
| RtelephonyOUIPortEntry | 1.3.6.1.4.1.10297.202.7000.3.4.5.7.1 | NA | |||||||||||||||||||
| CtelephonyOUIPortIndex | 1.3.6.1.4.1.10297.202.7000.3.4.5.7.1.1 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current The port index of OUI port | |||||||||||||||||||||
| CtelephonyOUIState | 1.3.6.1.4.1.10297.202.7000.3.4.5.7.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Ingress/Egress type value
| |||||||||||||||||||||
| CtelephonyOUICosMode | 1.3.6.1.4.1.10297.202.7000.3.4.5.7.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current port cos mode Src: QoS attributes are applied to packets with OUIs in the source MAC address. All: QoS attributes are applied to packets that are classified to the Voice VLAN
| |||||||||||||||||||||
| TinterfaceVlanTable | 1.3.6.1.4.1.10297.202.7000.3.4.6 | NA | |||||||||||||||||||
table · not-accessible · current The table of interface VLAN | |||||||||||||||||||||
| RinterfaceVlanEntry | 1.3.6.1.4.1.10297.202.7000.3.4.6.1 | NA | |||||||||||||||||||
| CinterfaceVlanIndex | 1.3.6.1.4.1.10297.202.7000.3.4.6.1.1 | Integer32 (1..4094) | RW | ||||||||||||||||||
column · Integer32 (1..4094) · read-write · current The index of interface VLAN | |||||||||||||||||||||
| CinterfaceVlanId | 1.3.6.1.4.1.10297.202.7000.3.4.6.1.2 | Integer32 (1..4094) | RW | ||||||||||||||||||
column · Integer32 (1..4094) · read-write · current The interface VLAN ID | |||||||||||||||||||||
| CinterfaceVlanName | 1.3.6.1.4.1.10297.202.7000.3.4.6.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The name of interface VLAN | |||||||||||||||||||||
| CinterfaceVlanRowStatus | 1.3.6.1.4.1.10297.202.7000.3.4.6.1.99 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current User can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
| |||||||||||||||||||||
| Neee | 1.3.6.1.4.1.10297.202.7000.3.5 | ||||||||||||||||||||
| TeeePortTable | 1.3.6.1.4.1.10297.202.7000.3.5.1 | NA | |||||||||||||||||||
table · not-accessible · current The table of EEE Port | |||||||||||||||||||||
| ReeePortEntry | 1.3.6.1.4.1.10297.202.7000.3.5.1.1 | NA | |||||||||||||||||||
| CeeePortIndex | 1.3.6.1.4.1.10297.202.7000.3.5.1.1.1 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current The port index of EEE Port | |||||||||||||||||||||
| CeeeState | 1.3.6.1.4.1.10297.202.7000.3.5.1.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Port EEE function.
| |||||||||||||||||||||
| Nmulticast | 1.3.6.1.4.1.10297.202.7000.3.6 | ||||||||||||||||||||
| SunknownMulticastAction | 1.3.6.1.4.1.10297.202.7000.3.6.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current the unknown multicast action Drop: drop the unknown multicast data. Flood: flood the unknown multicast data. Router port: forward the unknown multicast data to router port.
| |||||||||||||||||||||
| SforwardMethod | 1.3.6.1.4.1.10297.202.7000.3.6.2 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current the multicast forward method. MAC: forward method dmac+vid.
| |||||||||||||||||||||
| NigmpSnooping | 1.3.6.1.4.1.10297.202.7000.3.6.3 | ||||||||||||||||||||
| SigmpSnoopingState | 1.3.6.1.4.1.10297.202.7000.3.6.3.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current the enabling status of IGMP functionality
| |||||||||||||||||||||
| SigmpSnoopingVersion | 1.3.6.1.4.1.10297.202.7000.3.6.3.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current the igmp snooping version v2: Only support process igmp v2 packet. v3: Support v3 basic and v2.
| |||||||||||||||||||||
| SigmpSnoopingReportSuppression | 1.3.6.1.4.1.10297.202.7000.3.6.3.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current the enabling status of IGMP v2 report suppression
| |||||||||||||||||||||
| TigmpSnoopingTable | 1.3.6.1.4.1.10297.202.7000.3.6.3.4 | NA | |||||||||||||||||||
table · not-accessible · current The table of IGMP snooping | |||||||||||||||||||||
| RigmpSnoopingEntry | 1.3.6.1.4.1.10297.202.7000.3.6.3.4.1 | NA | |||||||||||||||||||
| CigmpSnoopingIndex | 1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.1 | Integer32 (1..4094) | RO | ||||||||||||||||||
column · Integer32 (1..4094) · read-only · current The index of IGMP snooping | |||||||||||||||||||||
| CigmpSnoopingVlanId | 1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.2 | Integer32 (1..4904) | RO | ||||||||||||||||||
column · Integer32 (1..4904) · read-only · current The IGMP entry VLAN ID | |||||||||||||||||||||
| CigmpSnoopStatus | 1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The enable status of IGMP VLAN functionality
| |||||||||||||||||||||
| CrouterPortsAutoLearn | 1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The enable statue of IGMP router port learning.
| |||||||||||||||||||||
| CqueryRobustness | 1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.5 | Integer32 (1..7) | RW | ||||||||||||||||||
column · Integer32 (1..7) · read-write · current The Robusstness Variable allows tuning for the expected packet loss on a subnet | |||||||||||||||||||||
| CqueryInterval | 1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.6 | Integer32 (30..18000) | RW | ||||||||||||||||||
column · Integer32 (30..18000) · read-write · current The interval of querier send general query | |||||||||||||||||||||
| CqueryMaxResponseInterval | 1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.7 | Integer32 (5..20) | RW | ||||||||||||||||||
column · Integer32 (5..20) · read-write · current In Membership Query Message, it specifies the maximum allowed time before sending a responding report in units of 1/10 second | |||||||||||||||||||||
| ClastMemberQueryCounter | 1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.8 | Integer32 (1..7) | RW | ||||||||||||||||||
column · Integer32 (1..7) · read-write · current The count that Querier-switch sends Group-Specific Queriers when it receives a Leave Group message for a group | |||||||||||||||||||||
| ClastMemberQueryInterval | 1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.9 | Integer32 (1..25) | RW | ||||||||||||||||||
column · Integer32 (1..25) · read-write · current The interval that Querier-switch sends Group-Specific Queriers when it receives a Leave Group Message for a group | |||||||||||||||||||||
| CimmediateLeave | 1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.10 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Leave the group when receive IGMP Leave message.
| |||||||||||||||||||||
| CoperQueryRobustness | 1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.11 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The operation query robustness. | |||||||||||||||||||||
| CoperQueryInterval | 1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.12 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The operation query interval. | |||||||||||||||||||||
| CoperQueryMaxResponseInterval | 1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.13 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The operating query max response interval. | |||||||||||||||||||||
| CoperLastMemberQueryCounter | 1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.14 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The operating last member query counter. | |||||||||||||||||||||
| CoperLastMemberQueryInterval | 1.3.6.1.4.1.10297.202.7000.3.6.3.4.1.15 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The operation last member query interval. | |||||||||||||||||||||
| TigmpQuerierTable | 1.3.6.1.4.1.10297.202.7000.3.6.3.5 | NA | |||||||||||||||||||
table · not-accessible · current The table of IGMP querier | |||||||||||||||||||||
| RigmpQuerierEntry | 1.3.6.1.4.1.10297.202.7000.3.6.3.5.1 | NA | |||||||||||||||||||
| CigmpQuerierVlanId | 1.3.6.1.4.1.10297.202.7000.3.6.3.5.1.1 | Integer32 (1..4094) | RO | ||||||||||||||||||
column · Integer32 (1..4094) · read-only · current The VLAN ID of IGMP querier | |||||||||||||||||||||
| CigmpQuerierState | 1.3.6.1.4.1.10297.202.7000.3.6.3.5.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The enabling status of IGMP Querier Election on the chose VLANs
| |||||||||||||||||||||
| CigmpQuerierStatus | 1.3.6.1.4.1.10297.202.7000.3.6.3.5.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The enabling status of IGMP Querier Election on the chose VLANs
| |||||||||||||||||||||
| CigmpQuerierVersion | 1.3.6.1.4.1.10297.202.7000.3.6.3.5.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The query version of IGMP Querier Election on the chose VLANs
| |||||||||||||||||||||
| CigmpQuerierIP | 1.3.6.1.4.1.10297.202.7000.3.6.3.5.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The query IP address of IGMP Querier Election on the chose VLANs | |||||||||||||||||||||
| TigmpStaticGroupTable | 1.3.6.1.4.1.10297.202.7000.3.6.3.6 | NA | |||||||||||||||||||
table · not-accessible · current The table of IGMP static group | |||||||||||||||||||||
| RigmpStaticGroupEntry | 1.3.6.1.4.1.10297.202.7000.3.6.3.6.1 | NA | |||||||||||||||||||
| CigmpStaticGroupIndex | 1.3.6.1.4.1.10297.202.7000.3.6.3.6.1.1 | Integer32 (1..256) | RO | ||||||||||||||||||
column · Integer32 (1..256) · read-only · current The index of IGMP static group | |||||||||||||||||||||
| CigmpStaticGroupVlanId | 1.3.6.1.4.1.10297.202.7000.3.6.3.6.1.2 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The VLAN ID of IGMP static group | |||||||||||||||||||||
| CigmpStaticGroupIPaddress | 1.3.6.1.4.1.10297.202.7000.3.6.3.6.1.3 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The IP address of this group | |||||||||||||||||||||
| CigmpStaticGroupMemberPorts | 1.3.6.1.4.1.10297.202.7000.3.6.3.6.1.4 | Bits | RW | ||||||||||||||||||
column · Bits · read-write · current The member ports of this group
| |||||||||||||||||||||
| CigmpStaticGroupRowStatus | 1.3.6.1.4.1.10297.202.7000.3.6.3.6.1.99 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current User can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
| |||||||||||||||||||||
| TigmpGroupTable | 1.3.6.1.4.1.10297.202.7000.3.6.3.7 | NA | |||||||||||||||||||
table · not-accessible · current The table of IGMP group | |||||||||||||||||||||
| RigmpGroupEntry | 1.3.6.1.4.1.10297.202.7000.3.6.3.7.1 | NA | |||||||||||||||||||
| CigmpGroupVlanId | 1.3.6.1.4.1.10297.202.7000.3.6.3.7.1.1 | Integer32 (1..4094) | RO | ||||||||||||||||||
column · Integer32 (1..4094) · read-only · current The VLAN ID of IGMP group | |||||||||||||||||||||
| CigmpGroupIPaddress | 1.3.6.1.4.1.10297.202.7000.3.6.3.7.1.2 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current The group IP address of this group | |||||||||||||||||||||
| CigmpGroupMemberPorts | 1.3.6.1.4.1.10297.202.7000.3.6.3.7.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The member ports of this group | |||||||||||||||||||||
| CigmpGroupType | 1.3.6.1.4.1.10297.202.7000.3.6.3.7.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The type of this group
| |||||||||||||||||||||
| CigmpGroupLife | 1.3.6.1.4.1.10297.202.7000.3.6.3.7.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The life time of this group | |||||||||||||||||||||
| TigmpRouterTable | 1.3.6.1.4.1.10297.202.7000.3.6.3.8 | NA | |||||||||||||||||||
table · not-accessible · current The table of IGMP router | |||||||||||||||||||||
| RigmpRouterEntry | 1.3.6.1.4.1.10297.202.7000.3.6.3.8.1 | NA | |||||||||||||||||||
| CigmpRouterVlanId | 1.3.6.1.4.1.10297.202.7000.3.6.3.8.1.1 | Integer32 (1..4094) | RO | ||||||||||||||||||
column · Integer32 (1..4094) · read-only · current The VLAN ID of the IGMP router. | |||||||||||||||||||||
| CigmpRouterPort | 1.3.6.1.4.1.10297.202.7000.3.6.3.8.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The port of the IGMP router. | |||||||||||||||||||||
| CigmpRouterExpireTime | 1.3.6.1.4.1.10297.202.7000.3.6.3.8.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The expire time of the IGMP router. | |||||||||||||||||||||
| NmldSnooping | 1.3.6.1.4.1.10297.202.7000.3.6.4 | ||||||||||||||||||||
| SmldSnoopingState | 1.3.6.1.4.1.10297.202.7000.3.6.4.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current the enabling status of MLD functionality
| |||||||||||||||||||||
| SmldSnoopingVersion | 1.3.6.1.4.1.10297.202.7000.3.6.4.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current the MLD snooping version
| |||||||||||||||||||||
| SmldSnoopingReportSuppression | 1.3.6.1.4.1.10297.202.7000.3.6.4.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current the enabling status of MLD report suppression
| |||||||||||||||||||||
| TmldSnoopingTable | 1.3.6.1.4.1.10297.202.7000.3.6.4.4 | NA | |||||||||||||||||||
table · not-accessible · current The table of MLD snooping | |||||||||||||||||||||
| RmldSnoopingEntry | 1.3.6.1.4.1.10297.202.7000.3.6.4.4.1 | NA | |||||||||||||||||||
| CmldSnoopingIndex | 1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.1 | Integer32 (1..4094) | RO | ||||||||||||||||||
column · Integer32 (1..4094) · read-only · current The index of MLD snooping | |||||||||||||||||||||
| CmldSnoopingVlanId | 1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.2 | Integer32 (1..4904) | RO | ||||||||||||||||||
column · Integer32 (1..4904) · read-only · current The MLD entry VLAN ID | |||||||||||||||||||||
| CmldSnoopStatus | 1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The enable status of MLD VLAN functionality
| |||||||||||||||||||||
| CmldSnoopRouterPortsAutoLearn | 1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The enable statue of MLD router port learning.
| |||||||||||||||||||||
| CmldSnoopQueryRobustness | 1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.5 | Integer32 (1..7) | RW | ||||||||||||||||||
column · Integer32 (1..7) · read-write · current The Robusstness Variable allows tuning for the expected packet loss on a subnet | |||||||||||||||||||||
| CmldSnoopQueryInterval | 1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.6 | Integer32 (30..18000) | RW | ||||||||||||||||||
column · Integer32 (30..18000) · read-write · current The interval of querier send general query | |||||||||||||||||||||
| CmldSnoopQueryMaxResponseInterval | 1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.7 | Integer32 (5..20) | RW | ||||||||||||||||||
column · Integer32 (5..20) · read-write · current In Membership Query Message, it specifies the maximum allowed time before sending a responding report in units of 1/10 second | |||||||||||||||||||||
| CmldSnoopLastMemberQueryCounter | 1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.8 | Integer32 (1..7) | RW | ||||||||||||||||||
column · Integer32 (1..7) · read-write · current The count that Querier-switch sends Group-Specific Queriers when it receives a Leave Group message for a group | |||||||||||||||||||||
| CmldSnoopLastMemberQueryInterval | 1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.9 | Integer32 (1..25) | RW | ||||||||||||||||||
column · Integer32 (1..25) · read-write · current The interval that Querier-switch sends Group-Specific Queriers when it receives a Leave Group Message for a group | |||||||||||||||||||||
| CmldSnoopImmediateLeave | 1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.10 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Leave the group when receive MLD Leave message.
| |||||||||||||||||||||
| CoperMldSnoopQueryRobustness | 1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.11 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The operation MLD query robustness. | |||||||||||||||||||||
| CoperMldSnoopQueryInterval | 1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.12 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The operation MLD query interval. | |||||||||||||||||||||
| CoperMldSnoopQueryMaxResponseInterval | 1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.13 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The operating MLD query max response interval. | |||||||||||||||||||||
| CoperMldSnoopLastMemberQueryCounter | 1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.14 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The operating MLD last member query counter. | |||||||||||||||||||||
| CoperMldSnoopLastMemberQueryInterval | 1.3.6.1.4.1.10297.202.7000.3.6.4.4.1.15 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The operation MLD last member query interval. | |||||||||||||||||||||
| TmldQuerierTable | 1.3.6.1.4.1.10297.202.7000.3.6.4.5 | NA | |||||||||||||||||||
table · not-accessible · current The table of MLD querier | |||||||||||||||||||||
| RmldQuerierEntry | 1.3.6.1.4.1.10297.202.7000.3.6.4.5.1 | NA | |||||||||||||||||||
| CmldQuerierVlanId | 1.3.6.1.4.1.10297.202.7000.3.6.4.5.1.1 | Integer32 (1..4094) | RO | ||||||||||||||||||
column · Integer32 (1..4094) · read-only · current The VLAN ID of MLD querier | |||||||||||||||||||||
| CmldQuerierState | 1.3.6.1.4.1.10297.202.7000.3.6.4.5.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The enabling status of MLD Querier Election on the chose VLANs
| |||||||||||||||||||||
| CmldQuerierStatus | 1.3.6.1.4.1.10297.202.7000.3.6.4.5.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The querier status of MLD Querier Election on the chose VLANs
| |||||||||||||||||||||
| CmldQuerierVersion | 1.3.6.1.4.1.10297.202.7000.3.6.4.5.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The query version of MLD Querier Election on the chose VLANs
| |||||||||||||||||||||
| CmldQuerierIP | 1.3.6.1.4.1.10297.202.7000.3.6.4.5.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The query IP address of MLD Querier Election on the chose VLANs | |||||||||||||||||||||
| TmldStaticGroupTable | 1.3.6.1.4.1.10297.202.7000.3.6.4.6 | NA | |||||||||||||||||||
table · not-accessible · current The table of MLD static group | |||||||||||||||||||||
| RmldStaticGroupEntry | 1.3.6.1.4.1.10297.202.7000.3.6.4.6.1 | NA | |||||||||||||||||||
| CmldStaticGroupIndex | 1.3.6.1.4.1.10297.202.7000.3.6.4.6.1.1 | Integer32 (1..256) | RO | ||||||||||||||||||
column · Integer32 (1..256) · read-only · current The index of MLD static group | |||||||||||||||||||||
| CmldStaticGroupVlanId | 1.3.6.1.4.1.10297.202.7000.3.6.4.6.1.2 | Integer32 (1..4094) | RW | ||||||||||||||||||
column · Integer32 (1..4094) · read-write · current The VLAN ID of MLD static group | |||||||||||||||||||||
| CmldStaticGroupIPaddress | 1.3.6.1.4.1.10297.202.7000.3.6.4.6.1.3 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The IP address of this group | |||||||||||||||||||||
| CmldStaticGroupMemberPorts | 1.3.6.1.4.1.10297.202.7000.3.6.4.6.1.4 | Bits | RW | ||||||||||||||||||
column · Bits · read-write · current The member ports of this group
| |||||||||||||||||||||
| CmldStaticGroupRowStatus | 1.3.6.1.4.1.10297.202.7000.3.6.4.6.1.99 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current User can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
| |||||||||||||||||||||
| TmldGroupTable | 1.3.6.1.4.1.10297.202.7000.3.6.4.7 | NA | |||||||||||||||||||
table · not-accessible · current The table of MLD group | |||||||||||||||||||||
| RmldGroupEntry | 1.3.6.1.4.1.10297.202.7000.3.6.4.7.1 | NA | |||||||||||||||||||
| CmldGroupVlanId | 1.3.6.1.4.1.10297.202.7000.3.6.4.7.1.1 | Integer32 (1..4094) | RO | ||||||||||||||||||
column · Integer32 (1..4094) · read-only · current The VLAN ID of MLD group | |||||||||||||||||||||
| CmldGroupIPaddress | 1.3.6.1.4.1.10297.202.7000.3.6.4.7.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The group IP address of this group | |||||||||||||||||||||
| CmldGroupMemberPorts | 1.3.6.1.4.1.10297.202.7000.3.6.4.7.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The member ports of this group | |||||||||||||||||||||
| CmldGroupType | 1.3.6.1.4.1.10297.202.7000.3.6.4.7.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The type of this group
| |||||||||||||||||||||
| CmldGroupLife | 1.3.6.1.4.1.10297.202.7000.3.6.4.7.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The life time of this group | |||||||||||||||||||||
| TmldRouterTable | 1.3.6.1.4.1.10297.202.7000.3.6.4.8 | NA | |||||||||||||||||||
table · not-accessible · current The table of MLD router | |||||||||||||||||||||
| RmldRouterEntry | 1.3.6.1.4.1.10297.202.7000.3.6.4.8.1 | NA | |||||||||||||||||||
| CmldRouterVlanId | 1.3.6.1.4.1.10297.202.7000.3.6.4.8.1.1 | Integer32 (1..4094) | RO | ||||||||||||||||||
column · Integer32 (1..4094) · read-only · current The VLAN ID of the MLD router. | |||||||||||||||||||||
| CmldRouterPort | 1.3.6.1.4.1.10297.202.7000.3.6.4.8.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The port of the MLD router. | |||||||||||||||||||||
| CmldRouterExpireTime | 1.3.6.1.4.1.10297.202.7000.3.6.4.8.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The expire time of the MLD router. | |||||||||||||||||||||
| NjamboFrame | 1.3.6.1.4.1.10297.202.7000.3.7 | ||||||||||||||||||||
| SjamboFramePktSize | 1.3.6.1.4.1.10297.202.7000.3.7.1 | Integer32 (1518..9216) | RW | ||||||||||||||||||
scalar · Integer32 (1518..9216) · read-write · current Jumbo frame size | |||||||||||||||||||||
| Nstp | 1.3.6.1.4.1.10297.202.7000.3.8 | ||||||||||||||||||||
| SstpEnable | 1.3.6.1.4.1.10297.202.7000.3.8.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Specify the STP status to be enable/disable on the switch. Enable STP will block all switch port and SNMP set will timeout.
| |||||||||||||||||||||
| SbpduForward | 1.3.6.1.4.1.10297.202.7000.3.8.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The BPDU forwarding action when the global STP is disable
| |||||||||||||||||||||
| SpathCostMethod | 1.3.6.1.4.1.10297.202.7000.3.8.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The path cost method of STP
| |||||||||||||||||||||
| SforceVersion | 1.3.6.1.4.1.10297.202.7000.3.8.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The operating mode of STP STP-compatible: IEEE 802.1D STP operation RSTP-Operation: IEEE 802.1W operation
| |||||||||||||||||||||
| TstpPortTable | 1.3.6.1.4.1.10297.202.7000.3.8.5 | NA | |||||||||||||||||||
table · not-accessible · current The table of STP port | |||||||||||||||||||||
| RstpPortEntry | 1.3.6.1.4.1.10297.202.7000.3.8.5.1 | NA | |||||||||||||||||||
| CstpPortIndex | 1.3.6.1.4.1.10297.202.7000.3.8.5.1.1 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current The port index of STP | |||||||||||||||||||||
| CstpAdminEnable | 1.3.6.1.4.1.10297.202.7000.3.8.5.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current enable/disable the STP port state
| |||||||||||||||||||||
| CstpPathCost | 1.3.6.1.4.1.10297.202.7000.3.8.5.1.3 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current the port is contribution, when it is the Root Port, to the Root Path Cost for the Bridge. (0 means 'Auto') | |||||||||||||||||||||
| CstpEdgePort | 1.3.6.1.4.1.10297.202.7000.3.8.5.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current the edge port configuration: No: Force to false state (as link to a bridge). Yes: Force to true state (as link to a host).
| |||||||||||||||||||||
| CstpP2pMac | 1.3.6.1.4.1.10297.202.7000.3.8.5.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current the Point-to-Point port configuration:
| |||||||||||||||||||||
| CstpMigrate | 1.3.6.1.4.1.10297.202.7000.3.8.5.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Force to try to use the new MST/RST BPDUs, and hence to test the hypothesis that all legacy systems that do not understand the new BPDU formats have been removed from the LAN segment on the port(s).
| |||||||||||||||||||||
| NstpBridgeInfo | 1.3.6.1.4.1.10297.202.7000.3.8.6 | ||||||||||||||||||||
| SstpBridgePriority | 1.3.6.1.4.1.10297.202.7000.3.8.6.1 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current the Bridge Priority in the CIST instance. Priority support the following value: 0, 4096, 8192, 12288, 16384, 20480, 24576, 28672, 32768, 36864, 40960, 45056, 49152, 53248, 57344, 61440 | |||||||||||||||||||||
| SstpBridgeForwardDelay | 1.3.6.1.4.1.10297.202.7000.3.8.6.2 | Integer32 (4..30) | RW | ||||||||||||||||||
scalar · Integer32 (4..30) · read-write · current the delay time an interface takes to converge from blocking state to forwarding state. Max Age <= 2*(Forward Delay Time - 1) | |||||||||||||||||||||
| SstpBridgeMaxAge | 1.3.6.1.4.1.10297.202.7000.3.8.6.3 | Integer32 (6..40) | RW | ||||||||||||||||||
scalar · Integer32 (6..40) · read-write · current the time any switch should wait before trying to change the STP topology after unhearing Hello BPUD. Max Age <= 2*(Forward Delay Time - 1) Max Age >= 2*(Hello Time + 1) | |||||||||||||||||||||
| SstpBridgeTxHoldCount | 1.3.6.1.4.1.10297.202.7000.3.8.6.4 | Integer32 (1..10) | RW | ||||||||||||||||||
scalar · Integer32 (1..10) · read-write · current the Transmit Hold Count used to limit BPDU transmission rate. | |||||||||||||||||||||
| SstpBridgeHelloTime | 1.3.6.1.4.1.10297.202.7000.3.8.6.5 | Integer32 (1..10) | RW | ||||||||||||||||||
scalar · Integer32 (1..10) · read-write · current the interval between periodic transmissions of BPDU by Designated Ports. Max Age >= 2*(Hello Time + 1) | |||||||||||||||||||||
| NstpBridgeStatus | 1.3.6.1.4.1.10297.202.7000.3.8.7 | ||||||||||||||||||||
| SbridgeIdentifier | 1.3.6.1.4.1.10297.202.7000.3.8.7.1 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current STP bridge identifier | |||||||||||||||||||||
| SdefinatedRootBridge | 1.3.6.1.4.1.10297.202.7000.3.8.7.2 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current STP destination root bridge ID | |||||||||||||||||||||
| SrootPathCost | 1.3.6.1.4.1.10297.202.7000.3.8.7.3 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current STP root path cost | |||||||||||||||||||||
| SdesignatedBridge | 1.3.6.1.4.1.10297.202.7000.3.8.7.4 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current STP designated bridge | |||||||||||||||||||||
| SrootPort | 1.3.6.1.4.1.10297.202.7000.3.8.7.5 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current STP root port | |||||||||||||||||||||
| SlastTopologyChange | 1.3.6.1.4.1.10297.202.7000.3.8.7.6 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current STP last topology change | |||||||||||||||||||||
| TstpPortStatusTable | 1.3.6.1.4.1.10297.202.7000.3.8.8 | NA | |||||||||||||||||||
table · not-accessible · current The table of STP port status | |||||||||||||||||||||
| RstpPortStatusEntry | 1.3.6.1.4.1.10297.202.7000.3.8.8.1 | NA | |||||||||||||||||||
| CstpPortStatusIndex | 1.3.6.1.4.1.10297.202.7000.3.8.8.1.1 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current The index of STP port status | |||||||||||||||||||||
| CstpPortPriority | 1.3.6.1.4.1.10297.202.7000.3.8.8.1.2 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The Port Priority to the selected ports in the CIST instance. Priority support the following value: 0, 16, 32, 48, 64, 80, 96, 112, 128, 144, 160, 176, 192, 208, 224, 240 | |||||||||||||||||||||
| CstpPortPathCost | 1.3.6.1.4.1.10297.202.7000.3.8.8.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Path Cost to the selected ports in the CIST instance. (0 means `Auto`) | |||||||||||||||||||||
| CstpPortDesignatedRootBridge | 1.3.6.1.4.1.10297.202.7000.3.8.8.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The designated root bridge | |||||||||||||||||||||
| CstpPortRootPathCost | 1.3.6.1.4.1.10297.202.7000.3.8.8.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The root path cost | |||||||||||||||||||||
| CstpPortDesignatedBridge | 1.3.6.1.4.1.10297.202.7000.3.8.8.1.6 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The designated bridge | |||||||||||||||||||||
| CstpPortEdgrPortConf | 1.3.6.1.4.1.10297.202.7000.3.8.8.1.7 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The edge port configuration | |||||||||||||||||||||
| CstpPortP2PMacConf | 1.3.6.1.4.1.10297.202.7000.3.8.8.1.8 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The point-to-point MAC configuration | |||||||||||||||||||||
| CstpPortRoles | 1.3.6.1.4.1.10297.202.7000.3.8.8.1.9 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The port roles
| |||||||||||||||||||||
| CstpPortStatus | 1.3.6.1.4.1.10297.202.7000.3.8.8.1.10 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The port status
| |||||||||||||||||||||
| TstpStatisticTable | 1.3.6.1.4.1.10297.202.7000.3.8.9 | NA | |||||||||||||||||||
table · not-accessible · current The table of STP statistic | |||||||||||||||||||||
| RstpStatisticEntry | 1.3.6.1.4.1.10297.202.7000.3.8.9.1 | NA | |||||||||||||||||||
| CstpStatisticPortIndex | 1.3.6.1.4.1.10297.202.7000.3.8.9.1.1 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current The port index of STP statistic | |||||||||||||||||||||
| CconfigurationBPDUsReceived | 1.3.6.1.4.1.10297.202.7000.3.8.9.1.2 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The configuration BPDU received | |||||||||||||||||||||
| CtcnBPDUsReceived | 1.3.6.1.4.1.10297.202.7000.3.8.9.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The TCN BPDU received | |||||||||||||||||||||
| CconfigurationBPDUsTransmitted | 1.3.6.1.4.1.10297.202.7000.3.8.9.1.4 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The configuration BPDU transmitted | |||||||||||||||||||||
| CtcnBPDUsTransmitted | 1.3.6.1.4.1.10297.202.7000.3.8.9.1.5 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The TCN BPDU transmitted | |||||||||||||||||||||
| Nmstp | 1.3.6.1.4.1.10297.202.7000.3.8.10 | ||||||||||||||||||||
| NmstConfigIdentification | 1.3.6.1.4.1.10297.202.7000.3.8.10.1 | ||||||||||||||||||||
| SmstConfigName | 1.3.6.1.4.1.10297.202.7000.3.8.10.1.1 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current The configuration name of MSTP | |||||||||||||||||||||
| SmstRevisionLevel | 1.3.6.1.4.1.10297.202.7000.3.8.10.1.2 | Integer32 (0..65535) | RW | ||||||||||||||||||
scalar · Integer32 (0..65535) · read-write · current The revision level of MSTP | |||||||||||||||||||||
| NmstInstanceID | 1.3.6.1.4.1.10297.202.7000.3.8.10.2 | ||||||||||||||||||||
| SmstiIDSetting | 1.3.6.1.4.1.10297.202.7000.3.8.10.2.1 | Integer32 (0..15) | RW | ||||||||||||||||||
scalar · Integer32 (0..15) · read-write · current The MSTI ID of MST instance ID | |||||||||||||||||||||
| SmstiVlanListSetting | 1.3.6.1.4.1.10297.202.7000.3.8.10.2.2 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current The VLAN list of MST instance ID | |||||||||||||||||||||
| SmstiIDSettingMove | 1.3.6.1.4.1.10297.202.7000.3.8.10.2.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The moving action of MST instance ID
| |||||||||||||||||||||
| TmstiIDInfoTable | 1.3.6.1.4.1.10297.202.7000.3.8.10.2.4 | NA | |||||||||||||||||||
table · not-accessible · current The table of MST instance ID info | |||||||||||||||||||||
| RmstiIDInfoEntry | 1.3.6.1.4.1.10297.202.7000.3.8.10.2.4.1 | NA | |||||||||||||||||||
| CmstiIDIndex | 1.3.6.1.4.1.10297.202.7000.3.8.10.2.4.1.1 | Integer32 (0..15) | RO | ||||||||||||||||||
column · Integer32 (0..15) · read-only · current The MSTI ID of MST instance ID info | |||||||||||||||||||||
| CmstiVLANList | 1.3.6.1.4.1.10297.202.7000.3.8.10.2.4.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The VLAN List of MST instance ID info | |||||||||||||||||||||
| NstpInstance | 1.3.6.1.4.1.10297.202.7000.3.8.10.3 | ||||||||||||||||||||
| TstpPriorityInfoTable | 1.3.6.1.4.1.10297.202.7000.3.8.10.3.1 | NA | |||||||||||||||||||
table · not-accessible · current The table of STP priority info | |||||||||||||||||||||
| RstpPriorityInfoEntry | 1.3.6.1.4.1.10297.202.7000.3.8.10.3.1.1 | NA | |||||||||||||||||||
| CstpMstiIDIndex | 1.3.6.1.4.1.10297.202.7000.3.8.10.3.1.1.1 | Integer32 (1..15) | RO | ||||||||||||||||||
column · Integer32 (1..15) · read-only · current The MSTI ID of STP instance info | |||||||||||||||||||||
| CstpPriorityValue | 1.3.6.1.4.1.10297.202.7000.3.8.10.3.1.1.2 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The priority of STP instance info. Priority support the following value: 0, 4096, 8192, 12288, 16384, 20480, 24576, 28672, 32768, 36864, 40960, 45056, 49152, 53248, 57344, 61440 | |||||||||||||||||||||
| CstpPriorityDefault | 1.3.6.1.4.1.10297.202.7000.3.8.10.3.1.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Set the priority to default value.
| |||||||||||||||||||||
| NmstInstanceInfo | 1.3.6.1.4.1.10297.202.7000.3.8.10.4 | ||||||||||||||||||||
| SmstBridgeIdentifier | 1.3.6.1.4.1.10297.202.7000.3.8.10.4.1 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current STP bridge identifier in MST | |||||||||||||||||||||
| SmstDesignatedRootBridge | 1.3.6.1.4.1.10297.202.7000.3.8.10.4.2 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current STP destination root bridge ID in MST | |||||||||||||||||||||
| SmstRootPathCost | 1.3.6.1.4.1.10297.202.7000.3.8.10.4.3 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current STP root path cost in MST | |||||||||||||||||||||
| SmstDesignatedBridge | 1.3.6.1.4.1.10297.202.7000.3.8.10.4.4 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current STP designated bridge in MST | |||||||||||||||||||||
| SmstRootPort | 1.3.6.1.4.1.10297.202.7000.3.8.10.4.5 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current STP root port in MST | |||||||||||||||||||||
| SmstLastTopologyChange | 1.3.6.1.4.1.10297.202.7000.3.8.10.4.6 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current STP last topology change in MST | |||||||||||||||||||||
| TmstStpPortStatusTable | 1.3.6.1.4.1.10297.202.7000.3.8.10.4.7 | NA | |||||||||||||||||||
table · not-accessible · current The table of STP port status in MST | |||||||||||||||||||||
| RmstStpPortStatusEntry | 1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1 | NA | |||||||||||||||||||
| CmstStpPortStatusIndex | 1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.1 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current The index of STP port status in MST | |||||||||||||||||||||
| CmstStpPortPriority | 1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The Port Priority to the selected ports in the CIST instance. Priority support the following value: 0, 16, 32, 48, 64, 80, 96, 112, 128, 144, 160, 176, 192, 208, 224, 240 | |||||||||||||||||||||
| CmstStpPortPathCost | 1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current Path Cost to the selected ports in the CIST instance. (0 means `Auto`) | |||||||||||||||||||||
| CmstStpPortDesignatedRootBridge | 1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The designated root bridge | |||||||||||||||||||||
| CmstStpPortRootPathCost | 1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The root path cost | |||||||||||||||||||||
| CmstStpPortDesignatedBridge | 1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.6 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The designated bridge | |||||||||||||||||||||
| CmstStpPortEdgrPortConf | 1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.7 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The edge port configuration | |||||||||||||||||||||
| CmstStpPortP2PMacConf | 1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.8 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The point-to-point MAC configuration | |||||||||||||||||||||
| CmstStpPortRoles | 1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.9 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The port roles | |||||||||||||||||||||
| CmstStpPortStatus | 1.3.6.1.4.1.10297.202.7000.3.8.10.4.7.1.10 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The port status | |||||||||||||||||||||
| SmstInstanceInfoID | 1.3.6.1.4.1.10297.202.7000.3.8.10.4.8 | Integer32 | RW | ||||||||||||||||||
scalar · Integer32 · read-write · current MST instance ID | |||||||||||||||||||||
| NqinqVlan | 1.3.6.1.4.1.10297.202.7000.3.9 | ||||||||||||||||||||
| SouterVlanEthtype | 1.3.6.1.4.1.10297.202.7000.3.9.1 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current Q-in-Q outer VLAN ether type | |||||||||||||||||||||
| TqinqPortInfoTable | 1.3.6.1.4.1.10297.202.7000.3.9.2 | NA | |||||||||||||||||||
table · not-accessible · current The table of Q-in-Q port info | |||||||||||||||||||||
| RqinqPortInfoEntry | 1.3.6.1.4.1.10297.202.7000.3.9.2.1 | NA | |||||||||||||||||||
| CqinqPortIndex | 1.3.6.1.4.1.10297.202.7000.3.9.2.1.1 | INTEGER (1..65535) | RO | ||||||||||||||||||
column · INTEGER (1..65535) · read-only · current The port index of Q-in-Q port info | |||||||||||||||||||||
| CqinqOuterPVID | 1.3.6.1.4.1.10297.202.7000.3.9.2.1.2 | INTEGER (1..4094) | RW | ||||||||||||||||||
column · INTEGER (1..4094) · read-write · current The Q-in-Q outer PVID | |||||||||||||||||||||
| CqinqOuterMode | 1.3.6.1.4.1.10297.202.7000.3.9.2.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The Q-in-Q outer mode
| |||||||||||||||||||||
| Ngarp | 1.3.6.1.4.1.10297.202.7000.3.10 | ||||||||||||||||||||
| SgarpJoinTime | 1.3.6.1.4.1.10297.202.7000.3.10.1 | INTEGER (1..600) | RW | ||||||||||||||||||
scalar · INTEGER (1..600) · read-write · current The GARP join time. Join time * 2 must be below leave time.
| |||||||||||||||||||||
| SgarpLeaveTime | 1.3.6.1.4.1.10297.202.7000.3.10.2 | INTEGER (2..3000) | RW | ||||||||||||||||||
scalar · INTEGER (2..3000) · read-write · current The GARP leave time. The leave time must below leave all time and bigger then Join time * 2
| |||||||||||||||||||||
| SgarpLeaveAllTime | 1.3.6.1.4.1.10297.202.7000.3.10.3 | INTEGER (2..12000) | RW | ||||||||||||||||||
scalar · INTEGER (2..12000) · read-write · current The GARP leave all time. The leave all time must bigger then leave time.
| |||||||||||||||||||||
| Ngvrp | 1.3.6.1.4.1.10297.202.7000.3.11 | ||||||||||||||||||||
| SgvrpStatus | 1.3.6.1.4.1.10297.202.7000.3.11.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The status of GVRP.
| |||||||||||||||||||||
| NxRingElite | 1.3.6.1.4.1.10297.202.7000.3.12 | ||||||||||||||||||||
| SxRingEliteState | 1.3.6.1.4.1.10297.202.7000.3.12.1 | INTEGER | RW | enable(1) | |||||||||||||||||
scalar · INTEGER · read-write · current The status of X-Ring Elite.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TxRingEliteRingIDTable | 1.3.6.1.4.1.10297.202.7000.3.12.2 | NA | |||||||||||||||||||
table · not-accessible · current The table of X-Ring Elite ring ID | |||||||||||||||||||||
| RxRingEliteRingIDEntry | 1.3.6.1.4.1.10297.202.7000.3.12.2.1 | NA | |||||||||||||||||||
| CxRingEliteRingIDIndex | 1.3.6.1.4.1.10297.202.7000.3.12.2.1.1 | Integer32 (1..512) | RO | ||||||||||||||||||
column · Integer32 (1..512) · read-only · current The index of X-Ring Elite ring ID | |||||||||||||||||||||
| CxRingEliteRingID | 1.3.6.1.4.1.10297.202.7000.3.12.2.1.2 | Integer32 (1..255) | RW | ||||||||||||||||||
column · Integer32 (1..255) · read-write · current The ring ID of X-Ring Elite | |||||||||||||||||||||
| CxRingEliteRule | 1.3.6.1.4.1.10297.202.7000.3.12.2.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The rule of the X-Ring Elite
| |||||||||||||||||||||
| CxRingElitePort1 | 1.3.6.1.4.1.10297.202.7000.3.12.2.1.4 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The port1 of this X-Ring Elite. For trunk port : Trunk1 is 1000, Trunk2 is 1001, ... | |||||||||||||||||||||
| CxRingElitePort2 | 1.3.6.1.4.1.10297.202.7000.3.12.2.1.5 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The port2 of this X-Ring Elite. For trunk port : Trunk1 is 1000, Trunk2 is 1001, ... | |||||||||||||||||||||
| CxRingEliteRingIDStatus | 1.3.6.1.4.1.10297.202.7000.3.12.2.1.6 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The status of this X-Ring Elite | |||||||||||||||||||||
| CxRingElitePort1Status | 1.3.6.1.4.1.10297.202.7000.3.12.2.1.7 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The port1 status of this X-Ring Elite | |||||||||||||||||||||
| CxRingElitePort2Status | 1.3.6.1.4.1.10297.202.7000.3.12.2.1.8 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The port2 status of this X-Ring Elite | |||||||||||||||||||||
| CxRingEliteRowStatus | 1.3.6.1.4.1.10297.202.7000.3.12.2.1.99 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current User can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
| |||||||||||||||||||||
| Nloopback | 1.3.6.1.4.1.10297.202.7000.3.13 | ||||||||||||||||||||
| SloopbackEnabled | 1.3.6.1.4.1.10297.202.7000.3.13.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The status of loopback detection.
| |||||||||||||||||||||
| SloopbackInterval | 1.3.6.1.4.1.10297.202.7000.3.13.2 | Integer32 (1..32767) | RW | ||||||||||||||||||
scalar · Integer32 (1..32767) · read-write · current The interval of loopback detection.
| |||||||||||||||||||||
| SloopbackRecoverTime | 1.3.6.1.4.1.10297.202.7000.3.13.3 | Integer32 (60..1000000) | RW | ||||||||||||||||||
scalar · Integer32 (60..1000000) · read-write · current The recover time of loopback detection.
| |||||||||||||||||||||
| TloopbackPortTable | 1.3.6.1.4.1.10297.202.7000.3.13.4 | NA | |||||||||||||||||||
table · not-accessible · current The port table of loopback detection | |||||||||||||||||||||
| RloopbackPortEntry | 1.3.6.1.4.1.10297.202.7000.3.13.4.1 | NA | |||||||||||||||||||
| CloopbackPortIndex | 1.3.6.1.4.1.10297.202.7000.3.13.4.1.1 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current The index of port loopback detection | |||||||||||||||||||||
| CloopbackPortEnabled | 1.3.6.1.4.1.10297.202.7000.3.13.4.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The enabled status of port loopback detection
| |||||||||||||||||||||
| CloopbackPortLoopStatus | 1.3.6.1.4.1.10297.202.7000.3.13.4.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The loop status of port loopback detection
| |||||||||||||||||||||
| NxRingPro | 1.3.6.1.4.1.10297.202.7000.3.14 | ||||||||||||||||||||
| SxRingProStatus | 1.3.6.1.4.1.10297.202.7000.3.14.1 | INTEGER | RW | enable(1) | |||||||||||||||||
scalar · INTEGER · read-write · current The status of X-Ring Pro
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NxRingProRingSetting | 1.3.6.1.4.1.10297.202.7000.3.14.2 | ||||||||||||||||||||
| SxRingProRingID | 1.3.6.1.4.1.10297.202.7000.3.14.2.1 | Integer32 (1..255) | RW | ||||||||||||||||||
scalar · Integer32 (1..255) · read-write · current The ring ID of X-Ring Pro | |||||||||||||||||||||
| SxRingProRingPort1 | 1.3.6.1.4.1.10297.202.7000.3.14.2.2 | Integer32 (1..65535) | RW | ||||||||||||||||||
scalar · Integer32 (1..65535) · read-write · current The port1 of X-Ring Pro. For trunk port : Trunk1 is 1000, Trunk2 is 1001, ... | |||||||||||||||||||||
| SxRingProRingPort2 | 1.3.6.1.4.1.10297.202.7000.3.14.2.3 | Integer32 (1..65535) | RW | ||||||||||||||||||
scalar · Integer32 (1..65535) · read-write · current The port2 of X-Ring Pro. For trunk port : Trunk1 is 1000, Trunk2 is 1001, ... | |||||||||||||||||||||
| SxRingProRingAdd | 1.3.6.1.4.1.10297.202.7000.3.14.2.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The add action of X-Ring Pro
| |||||||||||||||||||||
| NxRingProCoupleSetting | 1.3.6.1.4.1.10297.202.7000.3.14.3 | ||||||||||||||||||||
| SxRingProCoupleID | 1.3.6.1.4.1.10297.202.7000.3.14.3.1 | Integer32 (1..255) | RW | ||||||||||||||||||
scalar · Integer32 (1..255) · read-write · current The couple ring ID of X-Ring Pro | |||||||||||||||||||||
| SxRingProCouplePort | 1.3.6.1.4.1.10297.202.7000.3.14.3.2 | Bits | RW | ||||||||||||||||||
scalar · Bits · read-write · current The couple port of X-Ring Pro
| |||||||||||||||||||||
| SxRingProCoupleMasterRingID | 1.3.6.1.4.1.10297.202.7000.3.14.3.3 | Integer32 (1..255) | RW | ||||||||||||||||||
scalar · Integer32 (1..255) · read-write · current The master ring ID of X-Ring Pro | |||||||||||||||||||||
| SxRingProCoupleAdd | 1.3.6.1.4.1.10297.202.7000.3.14.3.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The add action of X-Ring Pro
| |||||||||||||||||||||
| TxRingProInfoTable | 1.3.6.1.4.1.10297.202.7000.3.14.4 | NA | |||||||||||||||||||
table · not-accessible · current The table of X-Ring Pro Infomation | |||||||||||||||||||||
| RxRingProInfoEntry | 1.3.6.1.4.1.10297.202.7000.3.14.4.1 | NA | |||||||||||||||||||
| CxRingProInfoRingID | 1.3.6.1.4.1.10297.202.7000.3.14.4.1.1 | Integer32 (1..255) | RO | 44 | |||||||||||||||||
column · Integer32 (1..255) · read-only · current The ring ID of X-Ring Pro Infomation Example values from LibreNMS test devices
| |||||||||||||||||||||
| CxRingProInfoMode | 1.3.6.1.4.1.10297.202.7000.3.14.4.1.2 | DisplayString | RO | DWN | |||||||||||||||||
column · DisplayString · read-only · current The mode of X-Ring Pro Infomation Example values from LibreNMS test devices
| |||||||||||||||||||||
| CxRingProInfoOperState | 1.3.6.1.4.1.10297.202.7000.3.14.4.1.3 | DisplayString | RO | Standby | |||||||||||||||||
column · DisplayString · read-only · current The operation state of X-Ring Pro Infomation Example values from LibreNMS test devices
| |||||||||||||||||||||
| CxRingProInfoPort1 | 1.3.6.1.4.1.10297.202.7000.3.14.4.1.4 | DisplayString | RO | gi10 | |||||||||||||||||
column · DisplayString · read-only · current The port1 of X-Ring Pro Infomation. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CxRingProInfoPort1FwdState | 1.3.6.1.4.1.10297.202.7000.3.14.4.1.5 | DisplayString | RO | DWN | |||||||||||||||||
column · DisplayString · read-only · current The port1 forwarding state of X-Ring Pro Infomation Example values from LibreNMS test devices
| |||||||||||||||||||||
| CxRingProInfoPort2 | 1.3.6.1.4.1.10297.202.7000.3.14.4.1.6 | DisplayString | RO | gi9 | |||||||||||||||||
column · DisplayString · read-only · current The port2 of X-Ring Pro Infomation Example values from LibreNMS test devices
| |||||||||||||||||||||
| CxRingProInfoPort2FwdState | 1.3.6.1.4.1.10297.202.7000.3.14.4.1.7 | DisplayString | RO | DWN | |||||||||||||||||
column · DisplayString · read-only · current The port2 forwarding state of X-Ring Pro Infomation Example values from LibreNMS test devices
| |||||||||||||||||||||
| CxRingProInfoDel | 1.3.6.1.4.1.10297.202.7000.3.14.4.1.8 | INTEGER | RW | nothing(0) | |||||||||||||||||
column · INTEGER · read-write · current The delete action of X-Ring Pro Infomation
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CxRingProInfoRole | 1.3.6.1.4.1.10297.202.7000.3.14.4.1.9 | INTEGER | RO | none(3) | |||||||||||||||||
column · INTEGER · read-only · current The role of X-Ring Pro Infomation
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NxRingProPairSetting | 1.3.6.1.4.1.10297.202.7000.3.14.5 | ||||||||||||||||||||
| SxRingProPairID | 1.3.6.1.4.1.10297.202.7000.3.14.5.1 | Integer32 (1..255) | RW | ||||||||||||||||||
scalar · Integer32 (1..255) · read-write · current The pair ring ID of X-Ring Pro | |||||||||||||||||||||
| SxRingProPairPort | 1.3.6.1.4.1.10297.202.7000.3.14.5.2 | Bits | RW | ||||||||||||||||||
scalar · Bits · read-write · current The pair port of X-Ring Pro
| |||||||||||||||||||||
| SxRingProPairMasterRingID | 1.3.6.1.4.1.10297.202.7000.3.14.5.3 | Integer32 (1..255) | RW | ||||||||||||||||||
scalar · Integer32 (1..255) · read-write · current The pair master ring ID of X-Ring Pro | |||||||||||||||||||||
| SxRingProPairAdd | 1.3.6.1.4.1.10297.202.7000.3.14.5.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The add action of X-Ring Pro
| |||||||||||||||||||||
| NxRingProRPairSetting | 1.3.6.1.4.1.10297.202.7000.3.14.6 | ||||||||||||||||||||
| SxRingProRPairID | 1.3.6.1.4.1.10297.202.7000.3.14.6.1 | Integer32 (1..255) | RW | ||||||||||||||||||
scalar · Integer32 (1..255) · read-write · current The R-pair ring ID of X-Ring Pro | |||||||||||||||||||||
| SxRingProRPairPort | 1.3.6.1.4.1.10297.202.7000.3.14.6.2 | Integer32 (1..65535) | RW | ||||||||||||||||||
scalar · Integer32 (1..65535) · read-write · current The R-pair port of X-Ring Pro | |||||||||||||||||||||
| SxRingProRPairMasterRingID | 1.3.6.1.4.1.10297.202.7000.3.14.6.3 | Integer32 (1..255) | RW | ||||||||||||||||||
scalar · Integer32 (1..255) · read-write · current The R-pair master ring ID of X-Ring Pro | |||||||||||||||||||||
| SxRingProRPairAdd | 1.3.6.1.4.1.10297.202.7000.3.14.6.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The add action of X-Ring Pro
| |||||||||||||||||||||
| NxRingProChainSetting | 1.3.6.1.4.1.10297.202.7000.3.14.7 | ||||||||||||||||||||
| SxRingProChainID | 1.3.6.1.4.1.10297.202.7000.3.14.7.1 | Integer32 (1..255) | RW | ||||||||||||||||||
scalar · Integer32 (1..255) · read-write · current The chain ring ID of X-Ring Pro | |||||||||||||||||||||
| SxRingProChainRole | 1.3.6.1.4.1.10297.202.7000.3.14.7.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The role of X-Ring Pro.
| |||||||||||||||||||||
| SxRingProChainHeadPort | 1.3.6.1.4.1.10297.202.7000.3.14.7.3 | Integer32 (1..65535) | RW | ||||||||||||||||||
scalar · Integer32 (1..65535) · read-write · current The head port of X-Ring Pro. For trunk port : Trunk1 is 1000, Trunk2 is 1001, ... | |||||||||||||||||||||
| SxRingProChainMemberPort | 1.3.6.1.4.1.10297.202.7000.3.14.7.4 | Integer32 (1..65535) | RW | ||||||||||||||||||
scalar · Integer32 (1..65535) · read-write · current The member port of X-Ring Pro. For trunk port : Trunk1 is 1000, Trunk2 is 1001, ... | |||||||||||||||||||||
| SxRingProChainAdd | 1.3.6.1.4.1.10297.202.7000.3.14.7.5 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The add action of X-Ring Pro
| |||||||||||||||||||||
| Ngmrp | 1.3.6.1.4.1.10297.202.7000.3.15 | ||||||||||||||||||||
| SgmrpStatus | 1.3.6.1.4.1.10297.202.7000.3.15.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The status of GMRP.
| |||||||||||||||||||||
| TgmrpMulticastGroupTable | 1.3.6.1.4.1.10297.202.7000.3.15.2 | NA | |||||||||||||||||||
table · not-accessible · current The table of GMRP multicast group | |||||||||||||||||||||
| RgmrpMulticastGroupEntry | 1.3.6.1.4.1.10297.202.7000.3.15.2.1 | NA | |||||||||||||||||||
| CgmrpMulticastGroupIndex | 1.3.6.1.4.1.10297.202.7000.3.15.2.1.1 | Integer32 (1..10) | RO | ||||||||||||||||||
column · Integer32 (1..10) · read-only · current The index of GMRP multicast group | |||||||||||||||||||||
| CgmrpMulticastGroupVlanId | 1.3.6.1.4.1.10297.202.7000.3.15.2.1.2 | Integer32 (1..4094) | RO | ||||||||||||||||||
column · Integer32 (1..4094) · read-only · current The vlan id of GMRP multicast group | |||||||||||||||||||||
| CgmrpMulticastGroupMacAddress | 1.3.6.1.4.1.10297.202.7000.3.15.2.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The MAC address of GMRP multicast group | |||||||||||||||||||||
| CgmrpMulticastGroupType | 1.3.6.1.4.1.10297.202.7000.3.15.2.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The type of GMRP multicast group
| |||||||||||||||||||||
| CgmrpMulticastGroupMemberPorts | 1.3.6.1.4.1.10297.202.7000.3.15.2.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The member ports of GMRP multicast group | |||||||||||||||||||||
| Nerps | 1.3.6.1.4.1.10297.202.7000.3.16 | ||||||||||||||||||||
| SerpsState | 1.3.6.1.4.1.10297.202.7000.3.16.1 | INTEGER | RW | disable(2) | |||||||||||||||||
scalar · INTEGER · read-write · current The status of ERPS
Example values from LibreNMS test devices
| |||||||||||||||||||||
| TerpsGroupTable | 1.3.6.1.4.1.10297.202.7000.3.16.2 | NA | |||||||||||||||||||
table · not-accessible · current The table of ERPS group. | |||||||||||||||||||||
| RerpsGroupEntry | 1.3.6.1.4.1.10297.202.7000.3.16.2.1 | NA | |||||||||||||||||||
| CerpsGroupRingIndex | 1.3.6.1.4.1.10297.202.7000.3.16.2.1.1 | Integer32 (1..255) | RO | ||||||||||||||||||
column · Integer32 (1..255) · read-only · current The index of ERPS group. | |||||||||||||||||||||
| CerpsGroupInstance | 1.3.6.1.4.1.10297.202.7000.3.16.2.1.2 | Integer32 (1..8) | RW | ||||||||||||||||||
column · Integer32 (1..8) · read-write · current The instance of ERPS group. | |||||||||||||||||||||
| CerpsGroupRingId | 1.3.6.1.4.1.10297.202.7000.3.16.2.1.3 | Integer32 (1..255) | RW | ||||||||||||||||||
column · Integer32 (1..255) · read-write · current The ring ID of ERPS group. | |||||||||||||||||||||
| CerpsGroupRole | 1.3.6.1.4.1.10297.202.7000.3.16.2.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The role of ERPS group
| |||||||||||||||||||||
| CerpsGroupState | 1.3.6.1.4.1.10297.202.7000.3.16.2.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The current state of ERPS group. | |||||||||||||||||||||
| CerpsGroupEastLink | 1.3.6.1.4.1.10297.202.7000.3.16.2.1.6 | Integer32 (1..255) | RW | ||||||||||||||||||
column · Integer32 (1..255) · read-write · current The east link port of ERPS group. For trunk port : Trunk1 is 1000, Trunk2 is 1001, ... | |||||||||||||||||||||
| CerpsGroupEastLinkRPL | 1.3.6.1.4.1.10297.202.7000.3.16.2.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The rpl setting of ERPS group east link.
| |||||||||||||||||||||
| CerpsGroupEastLinkState | 1.3.6.1.4.1.10297.202.7000.3.16.2.1.8 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The current state of ERPS group east link. | |||||||||||||||||||||
| CerpsGroupWestLink | 1.3.6.1.4.1.10297.202.7000.3.16.2.1.9 | Integer32 (1..255) | RW | ||||||||||||||||||
column · Integer32 (1..255) · read-write · current The west link port of ERPS group. For trunk port : Trunk1 is 1000, Trunk2 is 1001, ... | |||||||||||||||||||||
| CerpsGroupWestLinkRPL | 1.3.6.1.4.1.10297.202.7000.3.16.2.1.10 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The rpl setting of ERPS group west link
| |||||||||||||||||||||
| CerpsGroupWestLinkState | 1.3.6.1.4.1.10297.202.7000.3.16.2.1.11 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The current state of ERPS group west link. | |||||||||||||||||||||
| CerpsGroupMEL | 1.3.6.1.4.1.10297.202.7000.3.16.2.1.12 | Integer32 (0..7) | RW | ||||||||||||||||||
column · Integer32 (0..7) · read-write · current The MEL of ERPS group. | |||||||||||||||||||||
| CerpsGroupRAPSChannelVlan | 1.3.6.1.4.1.10297.202.7000.3.16.2.1.13 | Integer32 (1..4094) | RW | ||||||||||||||||||
column · Integer32 (1..4094) · read-write · current The r-aps channel vlan of ERPS group. | |||||||||||||||||||||
| CerpsGroupTrafficChannel | 1.3.6.1.4.1.10297.202.7000.3.16.2.1.14 | Integer32 (0..15) | RW | ||||||||||||||||||
column · Integer32 (0..15) · read-write · current The traffic channel of ERPS group. | |||||||||||||||||||||
| CerpsGroupRevertive | 1.3.6.1.4.1.10297.202.7000.3.16.2.1.15 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The revertive setting of ERPS group.
| |||||||||||||||||||||
| CerpsGroupType | 1.3.6.1.4.1.10297.202.7000.3.16.2.1.16 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The ring type of ERPS group.
| |||||||||||||||||||||
| CerpsGroupInterconnected | 1.3.6.1.4.1.10297.202.7000.3.16.2.1.17 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The interconnected setting of ERPS group.
| |||||||||||||||||||||
| CerpsGroupChannel | 1.3.6.1.4.1.10297.202.7000.3.16.2.1.18 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The virtual channel setting of ERPS group.
| |||||||||||||||||||||
| CerpsGroupTcPropagation | 1.3.6.1.4.1.10297.202.7000.3.16.2.1.19 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The tc-propagation setting of ERPS group.
| |||||||||||||||||||||
| CerpsWTRTimer | 1.3.6.1.4.1.10297.202.7000.3.16.2.1.20 | Integer32 (1..12) | RW | ||||||||||||||||||
column · Integer32 (1..12) · read-write · current The WTR timer of ERPS group.(1 Unit = 1 minute)
| |||||||||||||||||||||
| CerpsGuardTimer | 1.3.6.1.4.1.10297.202.7000.3.16.2.1.21 | Integer32 (1..200) | RW | ||||||||||||||||||
column · Integer32 (1..200) · read-write · current The guard timer of ERPS group.(1 Unit = 10 ms)
| |||||||||||||||||||||
| CerpsHoldOffTimer | 1.3.6.1.4.1.10297.202.7000.3.16.2.1.22 | Integer32 (0..100) | RW | ||||||||||||||||||
column · Integer32 (0..100) · read-write · current The hold-off timer of ERPS group.(1 Unit = 100 ms)
| |||||||||||||||||||||
| CerpsGroupRowStatus | 1.3.6.1.4.1.10297.202.7000.3.16.2.1.99 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current User can use createRequest(2) to create new entry. After setup the value, user use valid(1) to set into switch. User can use destory to invalid(4) an entry.
| |||||||||||||||||||||
| NmacAddressTable | 1.3.6.1.4.1.10297.202.7000.4 | ||||||||||||||||||||
| NstaticMacSetting | 1.3.6.1.4.1.10297.202.7000.4.1 | ||||||||||||||||||||
| TstaticMacSettingTable | 1.3.6.1.4.1.10297.202.7000.4.1.1 | NA | |||||||||||||||||||
table · not-accessible · current The table of static MAC setting | |||||||||||||||||||||
| RstaticMacSettingEntry | 1.3.6.1.4.1.10297.202.7000.4.1.1.1 | NA | |||||||||||||||||||
| CstaticMacSettingIndex | 1.3.6.1.4.1.10297.202.7000.4.1.1.1.1 | Integer32 (1..256) | RO | ||||||||||||||||||
column · Integer32 (1..256) · read-only · current The index of static MAC setting | |||||||||||||||||||||
| CstaticMacSettingMacAddress | 1.3.6.1.4.1.10297.202.7000.4.1.1.1.2 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The MAC address to which packets will be statically forwardef. It only supports unicast MAC address | |||||||||||||||||||||
| CstaticMacSettingVlan | 1.3.6.1.4.1.10297.202.7000.4.1.1.1.3 | Integer32 (1..4094) | RW | ||||||||||||||||||
column · Integer32 (1..4094) · read-write · current the VLAN which the static MAC belongs to | |||||||||||||||||||||
| CstaticMacSettingPort | 1.3.6.1.4.1.10297.202.7000.4.1.1.1.4 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current the port number of the MAC entry. For trunk port : Trunk1 is 1000, Trunk2 is 1001, ... | |||||||||||||||||||||
| CstaticMacSettingRowStatus | 1.3.6.1.4.1.10297.202.7000.4.1.1.1.99 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current User can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
| |||||||||||||||||||||
| NdynamicMacSetting | 1.3.6.1.4.1.10297.202.7000.4.2 | ||||||||||||||||||||
| SmacAgingTime | 1.3.6.1.4.1.10297.202.7000.4.2.1 | Integer32 (10..630) | RW | ||||||||||||||||||
scalar · Integer32 (10..630) · read-write · current The dynamic MAC address aging out value | |||||||||||||||||||||
| NdynamicLearned | 1.3.6.1.4.1.10297.202.7000.4.3 | ||||||||||||||||||||
| SclearMacAddressTable | 1.3.6.1.4.1.10297.202.7000.4.3.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Clear the MAC table
| |||||||||||||||||||||
| TmacAddressInfoTable | 1.3.6.1.4.1.10297.202.7000.4.3.2 | NA | |||||||||||||||||||
table · not-accessible · current The table of MAC address info | |||||||||||||||||||||
| RmacAddressInfoEntry | 1.3.6.1.4.1.10297.202.7000.4.3.2.1 | NA | |||||||||||||||||||
| CmacAddressInfoIndex | 1.3.6.1.4.1.10297.202.7000.4.3.2.1.1 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current The index of MAC address info | |||||||||||||||||||||
| CmacAddressInfoMAC | 1.3.6.1.4.1.10297.202.7000.4.3.2.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The MAC address to show dynamic MAC entries. | |||||||||||||||||||||
| CmacAddressInfoVlan | 1.3.6.1.4.1.10297.202.7000.4.3.2.1.3 | Integer32 (1..4094) | RO | ||||||||||||||||||
column · Integer32 (1..4094) · read-only · current The VLAN to show dynamic MAC entries. | |||||||||||||||||||||
| CmacAddressInfoType | 1.3.6.1.4.1.10297.202.7000.4.3.2.1.4 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The type of MAC address info
| |||||||||||||||||||||
| CmacAddressInfoPort | 1.3.6.1.4.1.10297.202.7000.4.3.2.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The port of MAC address info | |||||||||||||||||||||
| CaddtoStaticMacTable | 1.3.6.1.4.1.10297.202.7000.4.3.2.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Add the entry from dynamic to static.
| |||||||||||||||||||||
| Nsecurity | 1.3.6.1.4.1.10297.202.7000.5 | ||||||||||||||||||||
| NstormControl | 1.3.6.1.4.1.10297.202.7000.5.1 | ||||||||||||||||||||
| SstromControlUnit | 1.3.6.1.4.1.10297.202.7000.5.1.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The mode of stromg control. pps: strom control rate calculates by packet-based bps: strom control rate calculates by octet-based
| |||||||||||||||||||||
| SstromControlPreamble-IFG | 1.3.6.1.4.1.10297.202.7000.5.1.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current the rate calculates w/o preamble & IFG (20 bytes) Excluded: exclude preamble & IFG (20 bytes) when count ingress storm control rate. Included: include preamble & IFG (20 bytes) when count ingress storm control rate.
| |||||||||||||||||||||
| TstromControlPortTable | 1.3.6.1.4.1.10297.202.7000.5.1.3 | NA | |||||||||||||||||||
table · not-accessible · current The table of port security setting | |||||||||||||||||||||
| RstromControlPortEntry | 1.3.6.1.4.1.10297.202.7000.5.1.3.1 | NA | |||||||||||||||||||
| CstromControlPortIndex | 1.3.6.1.4.1.10297.202.7000.5.1.3.1.1 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current The port index of port security setting | |||||||||||||||||||||
| CstromControlPortState | 1.3.6.1.4.1.10297.202.7000.5.1.3.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current the state of setting
| |||||||||||||||||||||
| CstromControlPortAction | 1.3.6.1.4.1.10297.202.7000.5.1.3.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current the state of setting Drop: Packets exceed storm control rate will be droped. Shutdown: Port exceed storm control rate will be shutdown.
| |||||||||||||||||||||
| Cenablebroadcast | 1.3.6.1.4.1.10297.202.7000.5.1.3.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current enable/diable the broadcast packet
| |||||||||||||||||||||
| CbroadcastRate | 1.3.6.1.4.1.10297.202.7000.5.1.3.1.5 | Integer32 (1..1000000) | RW | ||||||||||||||||||
column · Integer32 (1..1000000) · read-write · current Value of storm control rate, Unit: pps (packet per-second) or Kbps (Kbits per-second) depends on global mode setting. The range is from 0 to 1000000. | |||||||||||||||||||||
| CenableunknownMulticast | 1.3.6.1.4.1.10297.202.7000.5.1.3.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current enable/diable the unknown multicast packet
| |||||||||||||||||||||
| CunknownMulticastRate | 1.3.6.1.4.1.10297.202.7000.5.1.3.1.7 | Integer32 (1..1000000) | RW | ||||||||||||||||||
column · Integer32 (1..1000000) · read-write · current Value of storm control rate, Unit: pps (packet per-second) or Kbps (Kbits per-second) depends on global mode setting. The range is from 0 to 1000000. | |||||||||||||||||||||
| CenableunknownUnicast | 1.3.6.1.4.1.10297.202.7000.5.1.3.1.8 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current enable/diable the unknown unicast packet
| |||||||||||||||||||||
| CunknownUnicastRate | 1.3.6.1.4.1.10297.202.7000.5.1.3.1.9 | Integer32 (1..1000000) | RW | ||||||||||||||||||
column · Integer32 (1..1000000) · read-write · current Value of storm control rate, Unit: pps (packet per-second) or Kbps (Kbits per-second) depends on global mode setting. The range is from 0 to 1000000. | |||||||||||||||||||||
| NprotectedPort | 1.3.6.1.4.1.10297.202.7000.5.2 | ||||||||||||||||||||
| TprotectedPortTable | 1.3.6.1.4.1.10297.202.7000.5.2.1 | NA | |||||||||||||||||||
table · not-accessible · current The table of protected port | |||||||||||||||||||||
| RprotectedPortEntry | 1.3.6.1.4.1.10297.202.7000.5.2.1.1 | NA | |||||||||||||||||||
| CprotectedPortIndex | 1.3.6.1.4.1.10297.202.7000.5.2.1.1.1 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current The port index of protected port | |||||||||||||||||||||
| CprotectedPortType | 1.3.6.1.4.1.10297.202.7000.5.2.1.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configure port protect type Unprotected: Unprotected port can communicate with all ports. Protected: Prevent protected ports from communication with each other.
| |||||||||||||||||||||
| Ndos | 1.3.6.1.4.1.10297.202.7000.5.3 | ||||||||||||||||||||
| SdmacEqualsmac | 1.3.6.1.4.1.10297.202.7000.5.3.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Both the source and the destination MAC addresses are the same
| |||||||||||||||||||||
| Sland | 1.3.6.1.4.1.10297.202.7000.5.3.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Both the source and the destination IPv4/IPv6 addresses are the same
| |||||||||||||||||||||
| SudpBlat | 1.3.6.1.4.1.10297.202.7000.5.3.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Both the source and the destination UDP port are the same
| |||||||||||||||||||||
| StcpBlat | 1.3.6.1.4.1.10297.202.7000.5.3.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Both the source and the destination TCP port are the same
| |||||||||||||||||||||
| Spod | 1.3.6.1.4.1.10297.202.7000.5.3.5 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Ping packets that length are larger than 65535 bytes
| |||||||||||||||||||||
| Sipv6MinFragment | 1.3.6.1.4.1.10297.202.7000.5.3.6 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current IPv6 fragmented packets (not including the last one) that payload length less than 1240 bytes, and the Min length can be configured if needed.
| |||||||||||||||||||||
| Sipv6MinFragmentValue | 1.3.6.1.4.1.10297.202.7000.5.3.7 | Integer32 (0..65535) | RW | ||||||||||||||||||
scalar · Integer32 (0..65535) · read-write · current IPv6 fragmented packets (not including the last one) that payload length less than 1240 bytes, and the Min length can be configured if needed. | |||||||||||||||||||||
| SicmpFragment | 1.3.6.1.4.1.10297.202.7000.5.3.8 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Fragmented ICMP packets.
| |||||||||||||||||||||
| Sipv4PingMaxSize | 1.3.6.1.4.1.10297.202.7000.5.3.9 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current IPv4 PING packet with the length
| |||||||||||||||||||||
| Sipv6PingMaxSize | 1.3.6.1.4.1.10297.202.7000.5.3.10 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current IPv6 PING packet with the length
| |||||||||||||||||||||
| SpingMaxSizeSetting | 1.3.6.1.4.1.10297.202.7000.5.3.11 | Integer32 (0..65535) | RW | ||||||||||||||||||
scalar · Integer32 (0..65535) · read-write · current Ping packet Max Size Setting. The default value is 512 Bytes, it can be configured if needed. | |||||||||||||||||||||
| SsmurfAttack | 1.3.6.1.4.1.10297.202.7000.5.3.12 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current ICMP echo request packet that destination IPv4 address is broadcast address.
| |||||||||||||||||||||
| SsmurfAttackValue | 1.3.6.1.4.1.10297.202.7000.5.3.13 | Integer32 (0..32) | RW | ||||||||||||||||||
scalar · Integer32 (0..32) · read-write · current The default Netmask length is 0, and it can be configured if needed. | |||||||||||||||||||||
| StcpMinHdrSize | 1.3.6.1.4.1.10297.202.7000.5.3.14 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current TCP packet that header length is less than the configured value.
| |||||||||||||||||||||
| StcpMinHdrSizeValue | 1.3.6.1.4.1.10297.202.7000.5.3.15 | Integer32 (0..31) | RW | ||||||||||||||||||
scalar · Integer32 (0..31) · read-write · current The default TCP Min Hdr Size is 20, it can be configured if needed. | |||||||||||||||||||||
| Stcp-Syn | 1.3.6.1.4.1.10297.202.7000.5.3.16 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current TCP SYN packets with source port less than 1024.
| |||||||||||||||||||||
| SnullScanAttack | 1.3.6.1.4.1.10297.202.7000.5.3.17 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current TCP sequence number is zero, and all control flags are zeroes.
| |||||||||||||||||||||
| SxMasScanAttack | 1.3.6.1.4.1.10297.202.7000.5.3.18 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current TCP sequence number is zero, and the FIN/URG/PSH flags are set.
| |||||||||||||||||||||
| StcpSYN-FINAttack | 1.3.6.1.4.1.10297.202.7000.5.3.19 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current A TCP packet with the SYN and FIN flags set.
| |||||||||||||||||||||
| StcpSYN-RSTAttack | 1.3.6.1.4.1.10297.202.7000.5.3.20 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current A TCP packet with the SYN and RST flags set.
| |||||||||||||||||||||
| StcpFragment | 1.3.6.1.4.1.10297.202.7000.5.3.21 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Fragmented TCP packets.
| |||||||||||||||||||||
| TdosPortTable | 1.3.6.1.4.1.10297.202.7000.5.3.22 | NA | |||||||||||||||||||
table · not-accessible · current The table of DoS port | |||||||||||||||||||||
| RdosPortEntry | 1.3.6.1.4.1.10297.202.7000.5.3.22.1 | NA | |||||||||||||||||||
| CdosportIndex | 1.3.6.1.4.1.10297.202.7000.5.3.22.1.1 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current The port index of DoS port | |||||||||||||||||||||
| CdosProtection | 1.3.6.1.4.1.10297.202.7000.5.3.22.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Configure port protect state
| |||||||||||||||||||||
| Naccess | 1.3.6.1.4.1.10297.202.7000.5.4 | ||||||||||||||||||||
| NtelnetInfo | 1.3.6.1.4.1.10297.202.7000.5.4.1 | ||||||||||||||||||||
| StelnetService | 1.3.6.1.4.1.10297.202.7000.5.4.1.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current enable/disable the tlent service
| |||||||||||||||||||||
| ScurrentTelnetSessionCount | 1.3.6.1.4.1.10297.202.7000.5.4.1.2 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The current telnet session counter | |||||||||||||||||||||
| NhttpSetting | 1.3.6.1.4.1.10297.202.7000.5.4.2 | ||||||||||||||||||||
| ShttpService | 1.3.6.1.4.1.10297.202.7000.5.4.2.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current enable/disable the http service
| |||||||||||||||||||||
| ShttpSessionTimeout | 1.3.6.1.4.1.10297.202.7000.5.4.2.2 | Integer32 (0..86400) | RW | ||||||||||||||||||
scalar · Integer32 (0..86400) · read-write · current the HTTP session timeout | |||||||||||||||||||||
| NhttpsSetting | 1.3.6.1.4.1.10297.202.7000.5.4.3 | ||||||||||||||||||||
| ShttpsService | 1.3.6.1.4.1.10297.202.7000.5.4.3.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current enable/disable the https service
| |||||||||||||||||||||
| ShttpsSessionTimeout | 1.3.6.1.4.1.10297.202.7000.5.4.3.2 | Integer32 (0..86400) | RW | ||||||||||||||||||
scalar · Integer32 (0..86400) · read-write · current the HTTPs session timeout | |||||||||||||||||||||
| NsshInfo | 1.3.6.1.4.1.10297.202.7000.5.4.4 | ||||||||||||||||||||
| SsshService | 1.3.6.1.4.1.10297.202.7000.5.4.4.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current enable/disable the ssh service
| |||||||||||||||||||||
| NportSecurity | 1.3.6.1.4.1.10297.202.7000.5.5 | ||||||||||||||||||||
| TportSecurityTable | 1.3.6.1.4.1.10297.202.7000.5.5.1 | NA | |||||||||||||||||||
table · not-accessible · current The table of port security | |||||||||||||||||||||
| RportSecurityEntry | 1.3.6.1.4.1.10297.202.7000.5.5.1.1 | NA | |||||||||||||||||||
| CportSecurityPortIndex | 1.3.6.1.4.1.10297.202.7000.5.5.1.1.1 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current The port index of port security | |||||||||||||||||||||
| CportSecurityEnabled | 1.3.6.1.4.1.10297.202.7000.5.5.1.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Enable/Disable port security
| |||||||||||||||||||||
| CportSecurityFDBLimit | 1.3.6.1.4.1.10297.202.7000.5.5.1.1.3 | Integer32 (0..64) | RW | ||||||||||||||||||
column · Integer32 (0..64) · read-write · current The number of FDB learning. | |||||||||||||||||||||
| CportSecurityViolationMACNotify | 1.3.6.1.4.1.10297.202.7000.5.5.1.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Enable/Disable Violation MAC Notification
| |||||||||||||||||||||
| NipSecurity | 1.3.6.1.4.1.10297.202.7000.5.6 | ||||||||||||||||||||
| SipSecurityStatus | 1.3.6.1.4.1.10297.202.7000.5.6.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable/Disable IP security
| |||||||||||||||||||||
| TipSecurityTable | 1.3.6.1.4.1.10297.202.7000.5.6.2 | NA | |||||||||||||||||||
table · not-accessible · current The table of IP security | |||||||||||||||||||||
| RipSecurityEntry | 1.3.6.1.4.1.10297.202.7000.5.6.2.1 | NA | |||||||||||||||||||
| CipSecurityIndex | 1.3.6.1.4.1.10297.202.7000.5.6.2.1.1 | Integer32 (1..10) | RO | ||||||||||||||||||
column · Integer32 (1..10) · read-only · current The index of IP security | |||||||||||||||||||||
| CipSecurityIPAddr | 1.3.6.1.4.1.10297.202.7000.5.6.2.1.2 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The IP address of IP security | |||||||||||||||||||||
| CipSecurityIPMask | 1.3.6.1.4.1.10297.202.7000.5.6.2.1.3 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The IP mask of IP security | |||||||||||||||||||||
| CipSecurityService | 1.3.6.1.4.1.10297.202.7000.5.6.2.1.4 | Bits | RW | ||||||||||||||||||
column · Bits · read-write · current The service of IP security
| |||||||||||||||||||||
| CipSecurityVlanId | 1.3.6.1.4.1.10297.202.7000.5.6.2.1.5 | Integer32 (1..4094) | RW | ||||||||||||||||||
column · Integer32 (1..4094) · read-write · current The VLAN id of IP security. This value will appear on multiple interface. | |||||||||||||||||||||
| CipSecurityRowStatus | 1.3.6.1.4.1.10297.202.7000.5.6.2.1.99 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current User can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
| |||||||||||||||||||||
| Nieee8021x | 1.3.6.1.4.1.10297.202.7000.5.7 | ||||||||||||||||||||
| Sieee8021xState | 1.3.6.1.4.1.10297.202.7000.5.7.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable/Disable IEEE 802.1x
| |||||||||||||||||||||
| Sieee8021xServerIP | 1.3.6.1.4.1.10297.202.7000.5.7.2 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current The server IP address of IEEE 802.1x | |||||||||||||||||||||
| Sieee8021xServerPort | 1.3.6.1.4.1.10297.202.7000.5.7.3 | Integer32 (1..65535) | RW | ||||||||||||||||||
scalar · Integer32 (1..65535) · read-write · current The server port of IEEE 802.1x | |||||||||||||||||||||
| Sieee8021xAccountingPort | 1.3.6.1.4.1.10297.202.7000.5.7.4 | Integer32 (1..65535) | RW | ||||||||||||||||||
scalar · Integer32 (1..65535) · read-write · current The accounting port of IEEE 802.1x | |||||||||||||||||||||
| Sieee8021xSecurityKey | 1.3.6.1.4.1.10297.202.7000.5.7.5 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current The security key of IEEE 802.1x | |||||||||||||||||||||
| Sieee8021xReauthPeriod | 1.3.6.1.4.1.10297.202.7000.5.7.6 | Integer32 (1..65535) | RW | ||||||||||||||||||
scalar · Integer32 (1..65535) · read-write · current The reauth period of IEEE 802.1x | |||||||||||||||||||||
| Tieee8021xPortTable | 1.3.6.1.4.1.10297.202.7000.5.7.7 | NA | |||||||||||||||||||
table · not-accessible · current The table of IEEE 802.1x | |||||||||||||||||||||
| Rieee8021xPortEntry | 1.3.6.1.4.1.10297.202.7000.5.7.7.1 | NA | |||||||||||||||||||
| Cieee8021xPortIndex | 1.3.6.1.4.1.10297.202.7000.5.7.7.1.1 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current The index of IEEE 802.1x | |||||||||||||||||||||
| Cieee8021xPortState | 1.3.6.1.4.1.10297.202.7000.5.7.7.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The port state of IEEE 802.1x
| |||||||||||||||||||||
| Sieee8021xAuthBased | 1.3.6.1.4.1.10297.202.7000.5.7.8 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The authentication based of IEEE 802.1x
| |||||||||||||||||||||
| NsecurityLogin | 1.3.6.1.4.1.10297.202.7000.5.8 | ||||||||||||||||||||
| SsecurityLoginState | 1.3.6.1.4.1.10297.202.7000.5.8.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable/Disable security login.
| |||||||||||||||||||||
| NradiusServer | 1.3.6.1.4.1.10297.202.7000.5.8.2 | ||||||||||||||||||||
| SradiusServerIP | 1.3.6.1.4.1.10297.202.7000.5.8.2.1 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current Radius server IP. | |||||||||||||||||||||
| SradiusServerPort | 1.3.6.1.4.1.10297.202.7000.5.8.2.2 | Integer32 (1..65535) | RW | ||||||||||||||||||
scalar · Integer32 (1..65535) · read-write · current Radius server port. | |||||||||||||||||||||
| SradiusServerSecurityKey | 1.3.6.1.4.1.10297.202.7000.5.8.2.3 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current The security key of radius server. | |||||||||||||||||||||
| NtacacsServer | 1.3.6.1.4.1.10297.202.7000.5.8.3 | ||||||||||||||||||||
| StacacsServerIP | 1.3.6.1.4.1.10297.202.7000.5.8.3.1 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current TACACS server IP. | |||||||||||||||||||||
| StacacsServerPort | 1.3.6.1.4.1.10297.202.7000.5.8.3.2 | Integer32 (1..65535) | RW | ||||||||||||||||||
scalar · Integer32 (1..65535) · read-write · current TACACS server port. | |||||||||||||||||||||
| StacacsServerSecurityKey | 1.3.6.1.4.1.10297.202.7000.5.8.3.3 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current The security key of TACACS server. | |||||||||||||||||||||
| SsecurityLoginType | 1.3.6.1.4.1.10297.202.7000.5.8.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable/Disable security login.
| |||||||||||||||||||||
| SsecurityLoginHttpState | 1.3.6.1.4.1.10297.202.7000.5.8.5 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable/Disable HTTP type of security login.
| |||||||||||||||||||||
| SsecurityLoginTelnetState | 1.3.6.1.4.1.10297.202.7000.5.8.6 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable/Disable telnet type of security login.
| |||||||||||||||||||||
| SsecurityLoginSSHState | 1.3.6.1.4.1.10297.202.7000.5.8.7 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable/Disable SSH type of security login.
| |||||||||||||||||||||
| Nacl | 1.3.6.1.4.1.10297.202.7000.5.9 | ||||||||||||||||||||
| TmacAclTable | 1.3.6.1.4.1.10297.202.7000.5.9.1 | NA | |||||||||||||||||||
table · not-accessible · current The table of mac acl | |||||||||||||||||||||
| RmacAclEntry | 1.3.6.1.4.1.10297.202.7000.5.9.1.1 | NA | |||||||||||||||||||
| CmacAclIndex | 1.3.6.1.4.1.10297.202.7000.5.9.1.1.1 | Integer32 (1..250) | RW | ||||||||||||||||||
column · Integer32 (1..250) · read-write · current The index of mac ACL entry | |||||||||||||||||||||
| CdestinationMacAddress | 1.3.6.1.4.1.10297.202.7000.5.9.1.1.2 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The destination MAC address of mac ACL entry. | |||||||||||||||||||||
| CdestinationMacMask | 1.3.6.1.4.1.10297.202.7000.5.9.1.1.3 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The destination MAC mask of mac ACL entry. | |||||||||||||||||||||
| CsourceMacAddress | 1.3.6.1.4.1.10297.202.7000.5.9.1.1.4 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The source MAC address of mac ACL entry. | |||||||||||||||||||||
| CsourceMacMask | 1.3.6.1.4.1.10297.202.7000.5.9.1.1.5 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The source MAC mask of mac ACL entry. | |||||||||||||||||||||
| CmacAclEtherType | 1.3.6.1.4.1.10297.202.7000.5.9.1.1.6 | Integer32 (1..65535) | RW | ||||||||||||||||||
column · Integer32 (1..65535) · read-write · current The ether type of mac ACL entry | |||||||||||||||||||||
| CmacAclVlanID | 1.3.6.1.4.1.10297.202.7000.5.9.1.1.7 | Integer32 (1..4094) | RW | ||||||||||||||||||
column · Integer32 (1..4094) · read-write · current The vlan id of mac ACL entry | |||||||||||||||||||||
| CmacAclPortList | 1.3.6.1.4.1.10297.202.7000.5.9.1.1.8 | Bits | RW | ||||||||||||||||||
column · Bits · read-write · current The port list of mac ACL entry.
| |||||||||||||||||||||
| CmacAclAction | 1.3.6.1.4.1.10297.202.7000.5.9.1.1.9 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The action of mac ACL entry.
| |||||||||||||||||||||
| CmacAclActiveStatus | 1.3.6.1.4.1.10297.202.7000.5.9.1.1.10 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The active status of mac ACL entry.
| |||||||||||||||||||||
| CmacAclRowStatus | 1.3.6.1.4.1.10297.202.7000.5.9.1.1.99 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current User can use createRequest(2) to create new entry. After setup the value, user use valid(1) to set into switch. User can use destory to invalid(4) an entry.
| |||||||||||||||||||||
| TipAclTable | 1.3.6.1.4.1.10297.202.7000.5.9.2 | NA | |||||||||||||||||||
table · not-accessible · current The table of ip acl | |||||||||||||||||||||
| RipAclEntry | 1.3.6.1.4.1.10297.202.7000.5.9.2.1 | NA | |||||||||||||||||||
| CipAclIndex | 1.3.6.1.4.1.10297.202.7000.5.9.2.1.1 | Integer32 (1..250) | RW | ||||||||||||||||||
column · Integer32 (1..250) · read-write · current The index of ip ACL entry | |||||||||||||||||||||
| CdestinationIpAddress | 1.3.6.1.4.1.10297.202.7000.5.9.2.1.2 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The destination ip address of ip ACL entry. | |||||||||||||||||||||
| CdestinationIpMask | 1.3.6.1.4.1.10297.202.7000.5.9.2.1.3 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The destination ip mask of ip ACL entry. | |||||||||||||||||||||
| CsourceIpAddress | 1.3.6.1.4.1.10297.202.7000.5.9.2.1.4 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The source ip address of ip ACL entry. | |||||||||||||||||||||
| CsourceIpMask | 1.3.6.1.4.1.10297.202.7000.5.9.2.1.5 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The source ip mask of ip ACL entry. | |||||||||||||||||||||
| CipProtocol | 1.3.6.1.4.1.10297.202.7000.5.9.2.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The ip protocol of ip ACL entry.
| |||||||||||||||||||||
| Cl4DestinationPort | 1.3.6.1.4.1.10297.202.7000.5.9.2.1.7 | Integer32 (1..65535) | RW | ||||||||||||||||||
column · Integer32 (1..65535) · read-write · current The L4 destination port of ip ACL entry | |||||||||||||||||||||
| Cl4SourcePort | 1.3.6.1.4.1.10297.202.7000.5.9.2.1.8 | Integer32 (1..65535) | RW | ||||||||||||||||||
column · Integer32 (1..65535) · read-write · current The L4 source port of ip ACL entry | |||||||||||||||||||||
| CipAclPortList | 1.3.6.1.4.1.10297.202.7000.5.9.2.1.9 | Bits | RW | ||||||||||||||||||
column · Bits · read-write · current The port list of ip ACL entry.
| |||||||||||||||||||||
| CipAclAction | 1.3.6.1.4.1.10297.202.7000.5.9.2.1.10 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The action of ip ACL entry.
| |||||||||||||||||||||
| CipAclActiveStatus | 1.3.6.1.4.1.10297.202.7000.5.9.2.1.11 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The active status of ip ACL entry.
| |||||||||||||||||||||
| CipAclRowStatus | 1.3.6.1.4.1.10297.202.7000.5.9.2.1.99 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current User can use createRequest(2) to create new entry. After setup the value, user use valid(1) to set into switch. User can use destory to invalid(4) an entry.
| |||||||||||||||||||||
| NipSourceGuard | 1.3.6.1.4.1.10297.202.7000.5.10 | ||||||||||||||||||||
| SipSourceGuardEnablePorts | 1.3.6.1.4.1.10297.202.7000.5.10.1 | Bits | RW | ||||||||||||||||||
scalar · Bits · read-write · current The enable port list for ip source guard.
| |||||||||||||||||||||
| TipSourceGuardTable | 1.3.6.1.4.1.10297.202.7000.5.10.2 | NA | |||||||||||||||||||
table · not-accessible · current The table of ip source guard | |||||||||||||||||||||
| RipSourceGuardEntry | 1.3.6.1.4.1.10297.202.7000.5.10.2.1 | NA | |||||||||||||||||||
| CipSourceGuardIndex | 1.3.6.1.4.1.10297.202.7000.5.10.2.1.1 | Integer32 (1..64) | RO | ||||||||||||||||||
column · Integer32 (1..64) · read-only · current The index of ip source guard entry | |||||||||||||||||||||
| CipSourceGuardSourceIp | 1.3.6.1.4.1.10297.202.7000.5.10.2.1.2 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The destination ip address of ip source guard entry. | |||||||||||||||||||||
| CipSourceGuardSourceMac | 1.3.6.1.4.1.10297.202.7000.5.10.2.1.3 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The destination MAC address of ip source guard entry. | |||||||||||||||||||||
| CipSourceGuardPort | 1.3.6.1.4.1.10297.202.7000.5.10.2.1.4 | Integer32 (1..65535) | RW | ||||||||||||||||||
column · Integer32 (1..65535) · read-write · current The port of ip source guard entry | |||||||||||||||||||||
| CipSourceGuardRowStatus | 1.3.6.1.4.1.10297.202.7000.5.10.2.1.5 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current User can use createRequest(2) to create new entry. After setup the value, user use valid(1) to set into switch. User can use destory to invalid(4) an entry.
| |||||||||||||||||||||
| NdhcpSnooping | 1.3.6.1.4.1.10297.202.7000.5.11 | ||||||||||||||||||||
| SdhcpSnoopingState | 1.3.6.1.4.1.10297.202.7000.5.11.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable/Disable DHCP snooping.
| |||||||||||||||||||||
| SdhcpSnoopingPorts | 1.3.6.1.4.1.10297.202.7000.5.11.2 | Bits | RW | ||||||||||||||||||
scalar · Bits · read-write · current The enable port list for dhcp snooping.
| |||||||||||||||||||||
| SdhcpSnoopingBindingPorts | 1.3.6.1.4.1.10297.202.7000.5.11.3 | Bits | RW | ||||||||||||||||||
scalar · Bits · read-write · current The enable blinding port list for dhcp snooping.
| |||||||||||||||||||||
| TdhcpSnoopingTable | 1.3.6.1.4.1.10297.202.7000.5.11.4 | NA | |||||||||||||||||||
table · not-accessible · current The table of dhcp snooping | |||||||||||||||||||||
| RdhcpSnoopingEntry | 1.3.6.1.4.1.10297.202.7000.5.11.4.1 | NA | |||||||||||||||||||
| CdhcpSnoopingIndex | 1.3.6.1.4.1.10297.202.7000.5.11.4.1.1 | Integer32 (1..64) | RO | ||||||||||||||||||
column · Integer32 (1..64) · read-only · current The index of dhcp snooping entry | |||||||||||||||||||||
| CdhcpSnoopingMac | 1.3.6.1.4.1.10297.202.7000.5.11.4.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The destination MAC address of dhcp snooping entry. | |||||||||||||||||||||
| CdhcpSnoopingIp | 1.3.6.1.4.1.10297.202.7000.5.11.4.1.3 | IpAddress | RO | ||||||||||||||||||
column · IpAddress · read-only · current The destination ip address of dhcp snooping entry. | |||||||||||||||||||||
| CdhcpSnoopingLeaseTime | 1.3.6.1.4.1.10297.202.7000.5.11.4.1.4 | INTEGER (60..864000) | RO | ||||||||||||||||||
column · INTEGER (60..864000) · read-only · current The lease time of dhcp snooping entry
| |||||||||||||||||||||
| CdhcpSnoopingVlanId | 1.3.6.1.4.1.10297.202.7000.5.11.4.1.5 | Integer32 (1..4094) | RO | ||||||||||||||||||
column · Integer32 (1..4094) · read-only · current The VLAN ID of dhcp snooping entry | |||||||||||||||||||||
| CdhcpSnoopingPort | 1.3.6.1.4.1.10297.202.7000.5.11.4.1.6 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current The port of dhcp snooping entry | |||||||||||||||||||||
| NarpSpoofing | 1.3.6.1.4.1.10297.202.7000.5.12 | ||||||||||||||||||||
| TarpSpoofingTable | 1.3.6.1.4.1.10297.202.7000.5.12.1 | NA | |||||||||||||||||||
table · not-accessible · current The table of arp spoofing | |||||||||||||||||||||
| RarpSpoofingEntry | 1.3.6.1.4.1.10297.202.7000.5.12.1.1 | NA | |||||||||||||||||||
| CarpSpoofingIndex | 1.3.6.1.4.1.10297.202.7000.5.12.1.1.1 | Integer32 (1..64) | RO | ||||||||||||||||||
column · Integer32 (1..64) · read-only · current The index of arp spoofing entry | |||||||||||||||||||||
| CarpSpoofingSourceMac | 1.3.6.1.4.1.10297.202.7000.5.12.1.1.2 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The source MAC address of arp spoofing entry. | |||||||||||||||||||||
| CarpSpoofingSourceIp | 1.3.6.1.4.1.10297.202.7000.5.12.1.1.3 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The source ip address of arp spoofing entry. | |||||||||||||||||||||
| CarpSpoofingRowStatus | 1.3.6.1.4.1.10297.202.7000.5.12.1.1.4 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current User can use createRequest(2) to create new entry. After setup the value, user use valid(1) to set into switch. User can use destory to invalid(4) an entry.
| |||||||||||||||||||||
| Nqos | 1.3.6.1.4.1.10297.202.7000.6 | ||||||||||||||||||||
| Ngeneral | 1.3.6.1.4.1.10297.202.7000.6.1 | ||||||||||||||||||||
| SqosMode | 1.3.6.1.4.1.10297.202.7000.6.1.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The QoS operaion mode
| |||||||||||||||||||||
| TqosPortSettingTable | 1.3.6.1.4.1.10297.202.7000.6.1.2 | NA | |||||||||||||||||||
table · not-accessible · current The table of QoS port setting | |||||||||||||||||||||
| RqosPortSettingEntry | 1.3.6.1.4.1.10297.202.7000.6.1.2.1 | NA | |||||||||||||||||||
| CqosPortIndex | 1.3.6.1.4.1.10297.202.7000.6.1.2.1.1 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current The port index of QoS port setting | |||||||||||||||||||||
| CqosPortCos | 1.3.6.1.4.1.10297.202.7000.6.1.2.1.2 | Integer32 (0..7) | RW | ||||||||||||||||||
column · Integer32 (0..7) · read-write · current The default CoS/802.1p priority value | |||||||||||||||||||||
| CqosPortRemarkCoS | 1.3.6.1.4.1.10297.202.7000.6.1.2.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current enable/disable CoS remark
| |||||||||||||||||||||
| CqosPortRemarkDSCP | 1.3.6.1.4.1.10297.202.7000.6.1.2.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current enable/disable DSCP remark
| |||||||||||||||||||||
| CqosPortRemarkIPPrecedence | 1.3.6.1.4.1.10297.202.7000.6.1.2.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Enable/Disable IP Precedence remark
| |||||||||||||||||||||
| TqueueSettingTable | 1.3.6.1.4.1.10297.202.7000.6.1.3 | NA | |||||||||||||||||||
table · not-accessible · current The table of queue setting | |||||||||||||||||||||
| RqueueSettingEntry | 1.3.6.1.4.1.10297.202.7000.6.1.3.1 | NA | |||||||||||||||||||
| CqueueIndex | 1.3.6.1.4.1.10297.202.7000.6.1.3.1.1 | Integer32 (1..8) | RO | ||||||||||||||||||
column · Integer32 (1..8) · read-only · current The index of queue setting | |||||||||||||||||||||
| CqueueMethod | 1.3.6.1.4.1.10297.202.7000.6.1.3.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current queue to strict priority type or Weight round robin type
| |||||||||||||||||||||
| CqueueWeight | 1.3.6.1.4.1.10297.202.7000.6.1.3.1.3 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current If the queue type is WRR, set the queue weight for the queue. | |||||||||||||||||||||
| CqueuePercentOfWRRBandwidth | 1.3.6.1.4.1.10297.202.7000.6.1.3.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The percentage of the WRR bandwidth | |||||||||||||||||||||
| TcostoQueueMapTable | 1.3.6.1.4.1.10297.202.7000.6.1.4 | NA | |||||||||||||||||||
table · not-accessible · current The table of CoS to queue | |||||||||||||||||||||
| RcostoQueueMapEntry | 1.3.6.1.4.1.10297.202.7000.6.1.4.1 | NA | |||||||||||||||||||
| CcosIndex | 1.3.6.1.4.1.10297.202.7000.6.1.4.1.1 | Integer32 (0..8) | RO | ||||||||||||||||||
column · Integer32 (0..8) · read-only · current The index of CoS to queue | |||||||||||||||||||||
| CcosQueue | 1.3.6.1.4.1.10297.202.7000.6.1.4.1.2 | Integer32 (1..8) | RW | ||||||||||||||||||
column · Integer32 (1..8) · read-write · current The queue of CoS to queue | |||||||||||||||||||||
| TqueuetoCosMapTable | 1.3.6.1.4.1.10297.202.7000.6.1.5 | NA | |||||||||||||||||||
table · not-accessible · current The table of queue to CoS | |||||||||||||||||||||
| RqueuetoCosMapEntry | 1.3.6.1.4.1.10297.202.7000.6.1.5.1 | NA | |||||||||||||||||||
| CqueuetoCosIndex | 1.3.6.1.4.1.10297.202.7000.6.1.5.1.1 | Integer32 (1..8) | RO | ||||||||||||||||||
column · Integer32 (1..8) · read-only · current The queue index of queue to CoS | |||||||||||||||||||||
| CqueueCos | 1.3.6.1.4.1.10297.202.7000.6.1.5.1.2 | Integer32 (0..7) | RW | ||||||||||||||||||
column · Integer32 (0..7) · read-write · current The cos of queue to CoS | |||||||||||||||||||||
| TdscptoQueueMapTable | 1.3.6.1.4.1.10297.202.7000.6.1.6 | NA | |||||||||||||||||||
table · not-accessible · current The table of DSCP to queue | |||||||||||||||||||||
| RdscptoQueueMapEntry | 1.3.6.1.4.1.10297.202.7000.6.1.6.1 | NA | |||||||||||||||||||
| CdscpIndex | 1.3.6.1.4.1.10297.202.7000.6.1.6.1.1 | Integer32 (0..64) | RO | ||||||||||||||||||
column · Integer32 (0..64) · read-only · current The DSCP index of DSCP to queue | |||||||||||||||||||||
| CdscpQueue | 1.3.6.1.4.1.10297.202.7000.6.1.6.1.2 | Integer32 (1..8) | RW | ||||||||||||||||||
column · Integer32 (1..8) · read-write · current The queue of DSCP to queue | |||||||||||||||||||||
| TqueuetoDSCPMapTable | 1.3.6.1.4.1.10297.202.7000.6.1.7 | NA | |||||||||||||||||||
table · not-accessible · current The table of queue to DSCP | |||||||||||||||||||||
| RqueuetoDSCPMapEntry | 1.3.6.1.4.1.10297.202.7000.6.1.7.1 | NA | |||||||||||||||||||
| CqueuetoDSCPIndex | 1.3.6.1.4.1.10297.202.7000.6.1.7.1.1 | Integer32 (1..8) | RO | ||||||||||||||||||
column · Integer32 (1..8) · read-only · current The queue index of queue to DSCP | |||||||||||||||||||||
| CqueuDscp | 1.3.6.1.4.1.10297.202.7000.6.1.7.1.2 | Integer32 (0..63) | RW | ||||||||||||||||||
column · Integer32 (0..63) · read-write · current The DSCP of queue to DSCP | |||||||||||||||||||||
| TipPrecedencetoQueueMapTable | 1.3.6.1.4.1.10297.202.7000.6.1.8 | NA | |||||||||||||||||||
table · not-accessible · current The table of IP precedence to queue | |||||||||||||||||||||
| RipPrecedencetoQueueMapEntry | 1.3.6.1.4.1.10297.202.7000.6.1.8.1 | NA | |||||||||||||||||||
| CipPrecedenceIndex | 1.3.6.1.4.1.10297.202.7000.6.1.8.1.1 | Integer32 (0..8) | RO | ||||||||||||||||||
column · Integer32 (0..8) · read-only · current The index of IP precedence to queue | |||||||||||||||||||||
| CipPrecedenceQueue | 1.3.6.1.4.1.10297.202.7000.6.1.8.1.2 | Integer32 (1..8) | RW | ||||||||||||||||||
column · Integer32 (1..8) · read-write · current The queue of IP precedence to queue | |||||||||||||||||||||
| TqueueToipPrecedenceMapTable | 1.3.6.1.4.1.10297.202.7000.6.1.9 | NA | |||||||||||||||||||
table · not-accessible · current The table of queue to IP precedence | |||||||||||||||||||||
| RqueueToipPrecedenceMapEntry | 1.3.6.1.4.1.10297.202.7000.6.1.9.1 | NA | |||||||||||||||||||
| CqueueToipPrecedenceIndex | 1.3.6.1.4.1.10297.202.7000.6.1.9.1.1 | Integer32 (1..8) | RO | ||||||||||||||||||
column · Integer32 (1..8) · read-only · current The index of queue to IP precedence | |||||||||||||||||||||
| CipPrecedence | 1.3.6.1.4.1.10297.202.7000.6.1.9.1.2 | Integer32 (0..7) | RW | ||||||||||||||||||
column · Integer32 (0..7) · read-write · current The IP precedence of queue to IP precedence | |||||||||||||||||||||
| NqosBasicMode | 1.3.6.1.4.1.10297.202.7000.6.2 | ||||||||||||||||||||
| StrustMode | 1.3.6.1.4.1.10297.202.7000.6.2.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current the QoS operation mode. CoS/802.1p: Traffic is mapped to queues based on the CoS field in the VLAN tag, or based on the per-port default CoS value if there is no VLAN tag on the incoming packet. DSCP: All IP traffic is mapped to queues based on the DSCP field in the IP header. If traffic is not IP traffic, it is mapped to the lowest priority queue. CoS/802.1p-DSCP: All IP traffic is mapped to queues based on the DSCP field in the IP header. If traffic is not IP but has VLAN tag, mapped to queues based on the CoS value in the VLAN tag. IP Precedence: All IP traffic is mapped to queues based on the IP Precedence field in the IP header. If traffic is not IP traffic, it is mapped to the lowest priority queue. None: All traffic is mapped to the lowest priority queue.
| |||||||||||||||||||||
| TqosBasicPortTable | 1.3.6.1.4.1.10297.202.7000.6.2.2 | NA | |||||||||||||||||||
table · not-accessible · current The table of QoS port | |||||||||||||||||||||
| RqosBasicPortEntry | 1.3.6.1.4.1.10297.202.7000.6.2.2.1 | NA | |||||||||||||||||||
| CqosBasicPortIndex | 1.3.6.1.4.1.10297.202.7000.6.2.2.1.1 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current The port index of QoS port | |||||||||||||||||||||
| CqosBasicPortTrust | 1.3.6.1.4.1.10297.202.7000.6.2.2.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current the port trust state Enabled: Traffic from this port will follow the global trust type. Disabled: Traffic will always go to the lowest priority queue.
| |||||||||||||||||||||
| NrateLimit | 1.3.6.1.4.1.10297.202.7000.6.3 | ||||||||||||||||||||
| NingressBandwidthControl | 1.3.6.1.4.1.10297.202.7000.6.3.1 | ||||||||||||||||||||
| TingressBandwidthTable | 1.3.6.1.4.1.10297.202.7000.6.3.1.1 | NA | |||||||||||||||||||
table · not-accessible · current The table of ingress bandwidth | |||||||||||||||||||||
| RingressBandwidthEntry | 1.3.6.1.4.1.10297.202.7000.6.3.1.1.1 | NA | |||||||||||||||||||
| CingressBandwidthPortIndex | 1.3.6.1.4.1.10297.202.7000.6.3.1.1.1.1 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current The port index of ingress bandwidth | |||||||||||||||||||||
| CingressBandwidthState | 1.3.6.1.4.1.10297.202.7000.6.3.1.1.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current enable/disable ingress bandwidth control
| |||||||||||||||||||||
| CingressBandwidthRate | 1.3.6.1.4.1.10297.202.7000.6.3.1.1.1.3 | Integer32 (16..1000000) | RW | ||||||||||||||||||
column · Integer32 (16..1000000) · read-write · current rate value, unit:16Kbps | |||||||||||||||||||||
| NegressBandwidthControl | 1.3.6.1.4.1.10297.202.7000.6.3.2 | ||||||||||||||||||||
| TegressBandwidthTable | 1.3.6.1.4.1.10297.202.7000.6.3.2.1 | NA | |||||||||||||||||||
table · not-accessible · current The table of egress bandwidth | |||||||||||||||||||||
| RegressBandwidthEntry | 1.3.6.1.4.1.10297.202.7000.6.3.2.1.1 | NA | |||||||||||||||||||
| CegressBandwidthPortIndex | 1.3.6.1.4.1.10297.202.7000.6.3.2.1.1.1 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current The port index of egress bandwidth | |||||||||||||||||||||
| CegressBandwidthState | 1.3.6.1.4.1.10297.202.7000.6.3.2.1.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current enable/disable egress bandwidth control
| |||||||||||||||||||||
| CegressBandwidthRate | 1.3.6.1.4.1.10297.202.7000.6.3.2.1.1.3 | Integer32 (0..1000000) | RW | ||||||||||||||||||
column · Integer32 (0..1000000) · read-write · current rate value, unit:16Kbps | |||||||||||||||||||||
| NegressQueueBandwidthControl | 1.3.6.1.4.1.10297.202.7000.6.3.3 | ||||||||||||||||||||
| TegressqueueBandwidthTable | 1.3.6.1.4.1.10297.202.7000.6.3.3.1 | NA | |||||||||||||||||||
table · not-accessible · current The table of egress queue bandwidth | |||||||||||||||||||||
| RegressqueueBandwidthEntry | 1.3.6.1.4.1.10297.202.7000.6.3.3.1.1 | NA | |||||||||||||||||||
| CegressqueueBandwidthPortIndex | 1.3.6.1.4.1.10297.202.7000.6.3.3.1.1.1 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current The port index of egress queue bandwidth | |||||||||||||||||||||
| CegressqueueBandwidthQueueIndex | 1.3.6.1.4.1.10297.202.7000.6.3.3.1.1.2 | Integer32 (1..8) | RO | ||||||||||||||||||
column · Integer32 (1..8) · read-only · current The queue index of egress queue bandwidth | |||||||||||||||||||||
| CegressqueueBandwidthState | 1.3.6.1.4.1.10297.202.7000.6.3.3.1.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current enable/disable egress bandwidth contro
| |||||||||||||||||||||
| CegressqueueBandwidthCir | 1.3.6.1.4.1.10297.202.7000.6.3.3.1.1.4 | Integer32 (16..1000000) | RW | ||||||||||||||||||
column · Integer32 (16..1000000) · read-write · current rate value, unit:16Kbps | |||||||||||||||||||||
| Nmanagement | 1.3.6.1.4.1.10297.202.7000.7 | ||||||||||||||||||||
| Nlldp | 1.3.6.1.4.1.10297.202.7000.7.1 | ||||||||||||||||||||
| SlldpEnabled | 1.3.6.1.4.1.10297.202.7000.7.1.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable/Disable LLDP protocol on this switch
| |||||||||||||||||||||
| SlldpPduDisableAction | 1.3.6.1.4.1.10297.202.7000.7.1.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Select LLDP PDU handling action to be filtered, bridging or flooded when LLDP is globally disabled.
| |||||||||||||||||||||
| SlldpTransmissionInterval | 1.3.6.1.4.1.10297.202.7000.7.1.3 | Integer32 (5..32767) | RW | ||||||||||||||||||
scalar · Integer32 (5..32767) · read-write · current The interval at which frames are transmitted. LLDP transmission interval multiplies holdtme multiplier should be smaller than 65535. LLDP transmission delay should not be larger than LLDP transmission interval * 0.25 | |||||||||||||||||||||
| SlldpHoldtimeMultiplier | 1.3.6.1.4.1.10297.202.7000.7.1.4 | Integer32 (2..10) | RW | ||||||||||||||||||
scalar · Integer32 (2..10) · read-write · current The multiplier on the transmit interval to assign to TTL. LLDP transmission interval multiplies holdtme multiplier should be smaller than 65535. | |||||||||||||||||||||
| SlldpReinitializationDelay | 1.3.6.1.4.1.10297.202.7000.7.1.5 | Integer32 (1..10) | RW | ||||||||||||||||||
scalar · Integer32 (1..10) · read-write · current The delay before a re-initialization | |||||||||||||||||||||
| SlldpTransmitDelay | 1.3.6.1.4.1.10297.202.7000.7.1.6 | Integer32 (1..8191) | RW | ||||||||||||||||||
scalar · Integer32 (1..8191) · read-write · current The delay after an LLDP frame is sent. LLDP transmission delay should not be larger than LLDP transmission interval * 0.25 | |||||||||||||||||||||
| TlldpPortConfTable | 1.3.6.1.4.1.10297.202.7000.7.1.7 | NA | |||||||||||||||||||
table · not-accessible · current The table of LLDP port configuration | |||||||||||||||||||||
| RlldpPortConfEntry | 1.3.6.1.4.1.10297.202.7000.7.1.7.1 | NA | |||||||||||||||||||
| ClldpPortIndex | 1.3.6.1.4.1.10297.202.7000.7.1.7.1.1 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current The port index of LLDP port configuration | |||||||||||||||||||||
| ClldpPortState | 1.3.6.1.4.1.10297.202.7000.7.1.7.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current the transmission state of LLDP port interface. Disable: Disable the transmission of LLDP PDUs. RX Only: Receive LLDP PDUs only. TX Only: Transmit LLDP PDUs only. TX And RX: Transmit and receive LLDP PDUs both.
| |||||||||||||||||||||
| ClldpPortOptionalTLVs | 1.3.6.1.4.1.10297.202.7000.7.1.7.1.3 | Bits | RW | ||||||||||||||||||
column · Bits · read-write · current The LLDP optional TLVs to be carried
| |||||||||||||||||||||
| ClldpPortVlans | 1.3.6.1.4.1.10297.202.7000.7.1.7.1.4 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The VLAN name ID to be carried. User can inpu vlan such as: 1-2, 100. | |||||||||||||||||||||
| NlocalDevice | 1.3.6.1.4.1.10297.202.7000.7.1.8 | ||||||||||||||||||||
| SlldpLocalDeviceChassisidsubtype | 1.3.6.1.4.1.10297.202.7000.7.1.8.1 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current LLDP local device chassis ID subtype | |||||||||||||||||||||
| SlldpLocalDeviceChassisID | 1.3.6.1.4.1.10297.202.7000.7.1.8.2 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current LLDP local device chassis ID | |||||||||||||||||||||
| SlldpLocalDeviceSystemName | 1.3.6.1.4.1.10297.202.7000.7.1.8.3 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current LLDP local device system name | |||||||||||||||||||||
| SlldpLocalDeviceSystemDescription | 1.3.6.1.4.1.10297.202.7000.7.1.8.4 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current LLDP local device system description | |||||||||||||||||||||
| SlldpLocalDeviceCapabilitiesSupported | 1.3.6.1.4.1.10297.202.7000.7.1.8.5 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current LLDP local device capabilities supported | |||||||||||||||||||||
| SlldpLocalDeviceCapabilitiesEnabled | 1.3.6.1.4.1.10297.202.7000.7.1.8.6 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current LLDP local device capabilities enabled | |||||||||||||||||||||
| SlldpLocalDevicePortIDsubtype | 1.3.6.1.4.1.10297.202.7000.7.1.8.7 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current LLDP local device port ID subtype | |||||||||||||||||||||
| TlldpLocalPortStatusTable | 1.3.6.1.4.1.10297.202.7000.7.1.8.8 | NA | |||||||||||||||||||
table · not-accessible · current The table of LLFP local port status | |||||||||||||||||||||
| RlldpLocalPortStatusEntry | 1.3.6.1.4.1.10297.202.7000.7.1.8.8.1 | NA | |||||||||||||||||||
| ClldpLocalPortIndex | 1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.1 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current The port index of LLDP local port status | |||||||||||||||||||||
| ClldpLocalPortStatus | 1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current LLDP local port status
| |||||||||||||||||||||
| ClldpLocalPortChassisIDsubtype | 1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP local port chassis ID subtype | |||||||||||||||||||||
| ClldpLocalPortChassisID | 1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP local port chassis ID | |||||||||||||||||||||
| ClldpLocalPortSystemname | 1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP local port system name | |||||||||||||||||||||
| ClldpLocalPortSystemdescription | 1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.6 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP local port system description | |||||||||||||||||||||
| ClldpLocalPortSupportedsystemcapabilities | 1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.7 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP local port supported system capabilities | |||||||||||||||||||||
| ClldpLocalPortEnablesystemcapabilities | 1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.8 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP local port enable system capabilities | |||||||||||||||||||||
| ClldpLocalPortIDsubtype | 1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.9 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP local port ID subtype | |||||||||||||||||||||
| ClldpLocalPortID | 1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.10 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP local port ID | |||||||||||||||||||||
| ClldpLocalPortDescription | 1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.11 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP local port description | |||||||||||||||||||||
| ClldpLocalPortManagementAddress | 1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.12 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP local port management address | |||||||||||||||||||||
| ClldpLocalPortAuto-negosupported | 1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.13 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP local port auto-nego supported | |||||||||||||||||||||
| ClldpLocalPortAuto-negoenabled | 1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.14 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP local port auto-nego enabled | |||||||||||||||||||||
| ClldpLocalPortAuto-negoAdvertisedCapabilities | 1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.15 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP local port auto-nego advertised capabilities | |||||||||||||||||||||
| ClldpLocalPortOperationMAUtype | 1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.16 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP local port operation MAU type | |||||||||||||||||||||
| ClldpLocalPortIeee8023MaxFrameSize | 1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.17 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP local port IEEE 802.3 max frame size | |||||||||||||||||||||
| ClldpLocalPortAggregationCapability | 1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.18 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP local port aggregation capabilities | |||||||||||||||||||||
| ClldpLocalPortAggregationStatus | 1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.19 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP local port aggregation status | |||||||||||||||||||||
| ClldpLocalPortAggregationPortID | 1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.20 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP local port aggregation port ID | |||||||||||||||||||||
| ClldpLocalPortPvid | 1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.21 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP local port PVID | |||||||||||||||||||||
| ClldpLocalPortVlanName | 1.3.6.1.4.1.10297.202.7000.7.1.8.8.1.22 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP local port vlan name | |||||||||||||||||||||
| NremoteDevice | 1.3.6.1.4.1.10297.202.7000.7.1.9 | ||||||||||||||||||||
| TlldpremoteDeviceTable | 1.3.6.1.4.1.10297.202.7000.7.1.9.1 | NA | |||||||||||||||||||
table · not-accessible · current The table of LLDP remote device | |||||||||||||||||||||
| RlldpremoteDeviceEntry | 1.3.6.1.4.1.10297.202.7000.7.1.9.1.1 | NA | |||||||||||||||||||
| ClldpremoteDeviceIndex | 1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.1 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current The index of LLDP remote device | |||||||||||||||||||||
| ClldpremoteDeviceLocalPort | 1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP remote device local port | |||||||||||||||||||||
| ClldpremoteDeviceChassisIDsubtype | 1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP remote device chassis ID subtype | |||||||||||||||||||||
| ClldpremoteDeviceChassisID | 1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP remote device chassis ID | |||||||||||||||||||||
| ClldpremoteDevicePortIDsubtype | 1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP remote device port ID subtype | |||||||||||||||||||||
| ClldpremoteDevicePortID | 1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.6 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP remote device port ID | |||||||||||||||||||||
| ClldpremoteDeviceSystemName | 1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.7 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP remote device system name | |||||||||||||||||||||
| ClldpremoteDeviceTimetolive | 1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.8 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP remote device time to live | |||||||||||||||||||||
| ClldpremoteDeviceEntryIndex | 1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.9 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP remote device entry index | |||||||||||||||||||||
| ClldpremoteDevicePortDescription | 1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.10 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LDP remote device port description | |||||||||||||||||||||
| ClldpremoteDeviceSystemdescription | 1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.11 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP remote device system description | |||||||||||||||||||||
| ClldpremoteDeviceSupportedsystemcapabilities | 1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.12 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP remote device supported syste, capabilities | |||||||||||||||||||||
| ClldpremoteDeviceEnablesystemcapabilities | 1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.13 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP remote device enable system capabilities | |||||||||||||||||||||
| ClldpremoteDeviceManagementAddress | 1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.14 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP remote device management address | |||||||||||||||||||||
| ClldpremoteDeviceAuto-negosupported | 1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.15 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP remote device auto-nego supported | |||||||||||||||||||||
| ClldpremoteDeviceAuto-negoenabled | 1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.16 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP remote device auto-nego enabled | |||||||||||||||||||||
| ClldpremoteDeviceAuto-negoAdvertisedCapabilities | 1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.17 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP remote device auto-nego advertised capabilities | |||||||||||||||||||||
| ClldpremoteDeviceOperationMAUtype | 1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.18 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP remote device operation MAU type | |||||||||||||||||||||
| ClldpremoteDeviceMdipowersupportportclass | 1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.19 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP remote device PSE MDI power support class | |||||||||||||||||||||
| ClldpremoteDevicePsemdipowersupport | 1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.20 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP remote device PSE MDI power support | |||||||||||||||||||||
| ClldpremoteDevicePsemdipowerstatus | 1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.21 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP remote device PSE MDI power status | |||||||||||||||||||||
| ClldpremoteDevicePsepowerpaircontrolability | 1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.22 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP remote device PSE power pair control ability | |||||||||||||||||||||
| ClldpremoteDevicePsepowerpair | 1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.23 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP remote device PSE power pair | |||||||||||||||||||||
| ClldpremoteDevicePsepowerclass | 1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.24 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP remote device PSE power class | |||||||||||||||||||||
| ClldpremoteDeviceIeee8023MaxFrameSize | 1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.25 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP remote device IEEE 802.3 Max frame size | |||||||||||||||||||||
| ClldpremoteDeviceAggregationCapability | 1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.26 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP remote device aggregation capabilities | |||||||||||||||||||||
| ClldpremoteDeviceAggregationStatus | 1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.27 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP remote device aggregation status | |||||||||||||||||||||
| ClldpremoteDeviceAggregationPortID | 1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.28 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP remote device aggregation Port ID | |||||||||||||||||||||
| ClldpremoteDevicePvid | 1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.29 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP remote device PVID | |||||||||||||||||||||
| ClldpremoteDeviceVlanName | 1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.30 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP remote device VLAN name | |||||||||||||||||||||
| ClldpremoteDeviceRowStatus | 1.3.6.1.4.1.10297.202.7000.7.1.9.1.1.31 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current LLDP remote device device rowstatus
| |||||||||||||||||||||
| TlldpOverloadingTable | 1.3.6.1.4.1.10297.202.7000.7.1.10 | NA | |||||||||||||||||||
table · not-accessible · current The table of LLDP overlaoding | |||||||||||||||||||||
| RlldpOverloadingEntry | 1.3.6.1.4.1.10297.202.7000.7.1.10.1 | NA | |||||||||||||||||||
| ClldpOverloadingPortIndex | 1.3.6.1.4.1.10297.202.7000.7.1.10.1.1 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current The port index of LLDP overlaoding | |||||||||||||||||||||
| ClldpOverloadingTotal | 1.3.6.1.4.1.10297.202.7000.7.1.10.1.2 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current LLDP overloading total | |||||||||||||||||||||
| ClldpOverloadingLeftToSend | 1.3.6.1.4.1.10297.202.7000.7.1.10.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current LLDP overloading left to send | |||||||||||||||||||||
| ClldpOverloadingStatus | 1.3.6.1.4.1.10297.202.7000.7.1.10.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP overloading status | |||||||||||||||||||||
| ClldpOverloadingMandatoryTLVs | 1.3.6.1.4.1.10297.202.7000.7.1.10.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP overloading mandatory TLVs | |||||||||||||||||||||
| ClldpOverloadingIeee8023TLVs | 1.3.6.1.4.1.10297.202.7000.7.1.10.1.6 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP overloading IEEE 802.3 TLVs | |||||||||||||||||||||
| ClldpOverloadingOptionalTLVs | 1.3.6.1.4.1.10297.202.7000.7.1.10.1.7 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP overloading optional TLVs | |||||||||||||||||||||
| ClldpOverloadingIeee8021TLVs | 1.3.6.1.4.1.10297.202.7000.7.1.10.1.8 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current LLDP overloading IEEE 802.1 TLVs | |||||||||||||||||||||
| Nsnmp | 1.3.6.1.4.1.10297.202.7000.7.2 | ||||||||||||||||||||
| SsnmpState | 1.3.6.1.4.1.10297.202.7000.7.2.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current SNMP golbal setting
| |||||||||||||||||||||
| TsnmpCommunityTable | 1.3.6.1.4.1.10297.202.7000.7.2.2 | NA | |||||||||||||||||||
table · not-accessible · current The table of SNMP community | |||||||||||||||||||||
| RsnmpCommunityEntry | 1.3.6.1.4.1.10297.202.7000.7.2.2.1 | NA | |||||||||||||||||||
| CsnmpCommunityIndex | 1.3.6.1.4.1.10297.202.7000.7.2.2.1.1 | Integer32 (1..8) | RO | ||||||||||||||||||
column · Integer32 (1..8) · read-only · current The index of SNMP community | |||||||||||||||||||||
| CsnmpCommunityString | 1.3.6.1.4.1.10297.202.7000.7.2.2.1.2 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The name of SNMP community | |||||||||||||||||||||
| CsnmpCommunityAccessRight | 1.3.6.1.4.1.10297.202.7000.7.2.2.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current SNMP access mode
| |||||||||||||||||||||
| CsnmpCommunityRowStatus | 1.3.6.1.4.1.10297.202.7000.7.2.2.1.99 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current User can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
| |||||||||||||||||||||
| TsnmpTrapHostTable | 1.3.6.1.4.1.10297.202.7000.7.2.3 | NA | |||||||||||||||||||
table · not-accessible · current The table of SNMP trap host | |||||||||||||||||||||
| RsnmpTrapHostEntry | 1.3.6.1.4.1.10297.202.7000.7.2.3.1 | NA | |||||||||||||||||||
| CsnmpTrapHostIndex | 1.3.6.1.4.1.10297.202.7000.7.2.3.1.1 | Integer32 (0..8) | RO | ||||||||||||||||||
column · Integer32 (0..8) · read-only · current The index of SNMP trap host | |||||||||||||||||||||
| CsnmpTrapHostIpaddress | 1.3.6.1.4.1.10297.202.7000.7.2.3.1.2 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The ipaddress or hostname of SNMP trap host | |||||||||||||||||||||
| CsnmpTrapHostCommunityName | 1.3.6.1.4.1.10297.202.7000.7.2.3.1.3 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The community name of SNMP trap host | |||||||||||||||||||||
| CsnmpTrapHostVersion | 1.3.6.1.4.1.10297.202.7000.7.2.3.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The SNMP version of SNMP trap host
| |||||||||||||||||||||
| CsnmpTrapHostRowStatus | 1.3.6.1.4.1.10297.202.7000.7.2.3.1.99 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current User can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
| |||||||||||||||||||||
| Tsnmpv3UserTable | 1.3.6.1.4.1.10297.202.7000.7.2.4 | NA | |||||||||||||||||||
table · not-accessible · current The table of SNMPv3 user | |||||||||||||||||||||
| Rsnmpv3UserEntry | 1.3.6.1.4.1.10297.202.7000.7.2.4.1 | NA | |||||||||||||||||||
| Csnmpv3UserIndex | 1.3.6.1.4.1.10297.202.7000.7.2.4.1.1 | Integer32 (0..8) | RO | ||||||||||||||||||
column · Integer32 (0..8) · read-only · current The index of SNMPv3 user | |||||||||||||||||||||
| Csnmpv3UserName | 1.3.6.1.4.1.10297.202.7000.7.2.4.1.2 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The name of SNMPv3 user. Please input more than 8 characters. | |||||||||||||||||||||
| Csnmpv3UserAccessRight | 1.3.6.1.4.1.10297.202.7000.7.2.4.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The access right of SNMPv3 user
| |||||||||||||||||||||
| Csnmpv3UserAuthProtocol | 1.3.6.1.4.1.10297.202.7000.7.2.4.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The authentication protocol of SNMPv3 user
| |||||||||||||||||||||
| Csnmpv3UserAuthPassword | 1.3.6.1.4.1.10297.202.7000.7.2.4.1.5 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The authentication password of SNMPv3 user.The password must be at least eight characters long.The password can include alphabetic, numeric, and '-', '_', '.' | |||||||||||||||||||||
| Csnmpv3UserPrivProtocol | 1.3.6.1.4.1.10297.202.7000.7.2.4.1.6 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The priviledge protocol of SNMPv3 user
| |||||||||||||||||||||
| Csnmpv3UserPrivPassword | 1.3.6.1.4.1.10297.202.7000.7.2.4.1.7 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The priviledge password of SNMPv3 user.The password must be at least eight characters long.The password can include alphabetic, numeric, and '-', '_', '.' | |||||||||||||||||||||
| Csnmpv3UserRowStatus | 1.3.6.1.4.1.10297.202.7000.7.2.4.1.99 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current User can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
| |||||||||||||||||||||
| Ssnmpv3EngineID | 1.3.6.1.4.1.10297.202.7000.7.2.5 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The snmpv3 engine ID | |||||||||||||||||||||
| Npoe | 1.3.6.1.4.1.10297.202.7000.7.3 | ||||||||||||||||||||
| NpoeSystemSetting | 1.3.6.1.4.1.10297.202.7000.7.3.1 | ||||||||||||||||||||
| SpoeFwVersion | 1.3.6.1.4.1.10297.202.7000.7.3.1.1 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The PoE firmware version | |||||||||||||||||||||
| SpoeMaxPowerAvailable | 1.3.6.1.4.1.10297.202.7000.7.3.1.2 | INTEGER (0..720) | RW | 260 | |||||||||||||||||
scalar · INTEGER (0..720) · read-write · current The maximum power available in PoE.
actual maximun power value is different according Switch Model.
ex : EKI-7710G maximun poe power value is 120W.
EKI-7712G maximun poe power value is 240W.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SpoeActualPowerConsumption | 1.3.6.1.4.1.10297.202.7000.7.3.1.3 | INTEGER | RO | 21 | |||||||||||||||||
scalar · INTEGER · read-only · current The actual power consumption in PoE
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SpoeOverLoadDisconnect | 1.3.6.1.4.1.10297.202.7000.7.3.1.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The overload disconnect mode in PoE
| |||||||||||||||||||||
| TpoePortSettingTable | 1.3.6.1.4.1.10297.202.7000.7.3.2 | NA | |||||||||||||||||||
table · not-accessible · current The table of PoE port setting | |||||||||||||||||||||
| RpoePortSettingEntry | 1.3.6.1.4.1.10297.202.7000.7.3.2.1 | NA | |||||||||||||||||||
| CpoePortIndex | 1.3.6.1.4.1.10297.202.7000.7.3.2.1.1 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current The index of PoE port setting | |||||||||||||||||||||
| CpoePortState | 1.3.6.1.4.1.10297.202.7000.7.3.2.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The state of PoE port
| |||||||||||||||||||||
| CpoePortLegacy | 1.3.6.1.4.1.10297.202.7000.7.3.2.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The legacy of PoE port
| |||||||||||||||||||||
| CpoePortPowerLimitClass | 1.3.6.1.4.1.10297.202.7000.7.3.2.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The power limit form classification of PoE port
| |||||||||||||||||||||
| CpoePortPriority | 1.3.6.1.4.1.10297.202.7000.7.3.2.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The priority of PoE port
| |||||||||||||||||||||
| CpoePortPowerLimit | 1.3.6.1.4.1.10297.202.7000.7.3.2.1.6 | Integer32 (0..30000) | RW | ||||||||||||||||||
column · Integer32 (0..30000) · read-write · current The power limit of PoE port
| |||||||||||||||||||||
| TpoePortStatusTable | 1.3.6.1.4.1.10297.202.7000.7.3.3 | NA | |||||||||||||||||||
table · not-accessible · current The table of PoE port status | |||||||||||||||||||||
| RpoePortStatusEntry | 1.3.6.1.4.1.10297.202.7000.7.3.3.1 | NA | |||||||||||||||||||
| CpoePortStatusIndex | 1.3.6.1.4.1.10297.202.7000.7.3.3.1.1 | Integer32 (1..65535) | RO | 1 | |||||||||||||||||
column · Integer32 (1..65535) · read-only · current The index of PoE port status Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpoePortCurrent | 1.3.6.1.4.1.10297.202.7000.7.3.3.1.2 | DisplayString | RO | 4e:2f:41:00 | |||||||||||||||||
column · DisplayString · read-only · current The current of PoE port
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpoePortVoltage | 1.3.6.1.4.1.10297.202.7000.7.3.3.1.3 | DisplayString | RO | N/A | |||||||||||||||||
column · DisplayString · read-only · current The voltage of PoE port
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpoePortPower | 1.3.6.1.4.1.10297.202.7000.7.3.3.1.4 | DisplayString | RO | 0.000 | |||||||||||||||||
column · DisplayString · read-only · current The power of PoE port
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CpoePortTemp | 1.3.6.1.4.1.10297.202.7000.7.3.3.1.5 | DisplayString | RO | 47.500 | |||||||||||||||||
column · DisplayString · read-only · current The temperature of PoE port
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NtcpModbus | 1.3.6.1.4.1.10297.202.7000.7.4 | ||||||||||||||||||||
| StcpModbusState | 1.3.6.1.4.1.10297.202.7000.7.4.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The state of TCP Modbus
| |||||||||||||||||||||
| StcpModbusTimeout | 1.3.6.1.4.1.10297.202.7000.7.4.2 | Integer32 (1..32767) | RW | ||||||||||||||||||
scalar · Integer32 (1..32767) · read-write · current The time out of TCP Modbus | |||||||||||||||||||||
| NdhcpServer | 1.3.6.1.4.1.10297.202.7000.7.5 | ||||||||||||||||||||
| SdhcpServerState | 1.3.6.1.4.1.10297.202.7000.7.5.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The state of DHCP Server
| |||||||||||||||||||||
| NdhcpServerGlobalSetting | 1.3.6.1.4.1.10297.202.7000.7.5.2 | ||||||||||||||||||||
| SdhcpServerLeaseTime | 1.3.6.1.4.1.10297.202.7000.7.5.2.1 | INTEGER (60..864000) | RW | ||||||||||||||||||
scalar · INTEGER (60..864000) · read-write · current The lease time of DHCP server
| |||||||||||||||||||||
| SdhcpServerLowIP | 1.3.6.1.4.1.10297.202.7000.7.5.2.2 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current The low IP address of DHCP server | |||||||||||||||||||||
| SdhcpServerHighIP | 1.3.6.1.4.1.10297.202.7000.7.5.2.3 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current The high IP address of DHCP server | |||||||||||||||||||||
| SdhcpServerSubmask | 1.3.6.1.4.1.10297.202.7000.7.5.2.4 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current The subnet mask of DHCP server | |||||||||||||||||||||
| SdhcpServerGateway | 1.3.6.1.4.1.10297.202.7000.7.5.2.5 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current The gateway of DHCP server | |||||||||||||||||||||
| SdhcpServerDNS | 1.3.6.1.4.1.10297.202.7000.7.5.2.6 | IpAddress | RW | ||||||||||||||||||
scalar · IpAddress · read-write · current The DNS of DHCP server | |||||||||||||||||||||
| SdhcpServerStatus | 1.3.6.1.4.1.10297.202.7000.7.5.2.7 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current If user set golbal setting with SNMP, the value would not apply to swith. They need to set active(1) to apply into switch.
| |||||||||||||||||||||
| SdhcpServerClearIpPool | 1.3.6.1.4.1.10297.202.7000.7.5.2.8 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Clear IP pool in DHCP Server
| |||||||||||||||||||||
| TdhcpServerPortTable | 1.3.6.1.4.1.10297.202.7000.7.5.3 | NA | |||||||||||||||||||
table · not-accessible · current The table of DHCP server port setting | |||||||||||||||||||||
| RdhcpServerPortEntry | 1.3.6.1.4.1.10297.202.7000.7.5.3.1 | NA | |||||||||||||||||||
| CdhcpServerPortIndex | 1.3.6.1.4.1.10297.202.7000.7.5.3.1.1 | Integer32 (1..65535) | RO | ||||||||||||||||||
column · Integer32 (1..65535) · read-only · current The index of DHCP server port setting | |||||||||||||||||||||
| CdhcpServerPortLowIP | 1.3.6.1.4.1.10297.202.7000.7.5.3.1.2 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The low IP address of DHCP server port | |||||||||||||||||||||
| CdhcpServerPortHighIP | 1.3.6.1.4.1.10297.202.7000.7.5.3.1.3 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The high IP address of DHCP server port | |||||||||||||||||||||
| CdhcpServerPortMask | 1.3.6.1.4.1.10297.202.7000.7.5.3.1.4 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The subnet mask of DHCP server port | |||||||||||||||||||||
| CdhcpServerPortGW | 1.3.6.1.4.1.10297.202.7000.7.5.3.1.5 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The gateway of DHCP server port | |||||||||||||||||||||
| CdhcpServerPortDNS | 1.3.6.1.4.1.10297.202.7000.7.5.3.1.6 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The DNS of DHCP server port | |||||||||||||||||||||
| CdhcpServerPortStatus | 1.3.6.1.4.1.10297.202.7000.7.5.3.1.7 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current If user set port setting with SNMP, the value would not apply to swith. They need to set active(1) to apply into switch.
| |||||||||||||||||||||
| CdhcpServerPortClear | 1.3.6.1.4.1.10297.202.7000.7.5.3.1.8 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Clear IP poll on DHCP server port
| |||||||||||||||||||||
| TdhcpServerOpt82Table | 1.3.6.1.4.1.10297.202.7000.7.5.4 | NA | |||||||||||||||||||
table · not-accessible · current The table of DHCP option 82 setting | |||||||||||||||||||||
| RdhcpServerOpt82Entry | 1.3.6.1.4.1.10297.202.7000.7.5.4.1 | NA | |||||||||||||||||||
| CdhcpServerOpt82Index | 1.3.6.1.4.1.10297.202.7000.7.5.4.1.1 | Integer32 (1..2) | RO | ||||||||||||||||||
column · Integer32 (1..2) · read-only · current The index of DHCP server option 82 setting | |||||||||||||||||||||
| CdhcpServerOpt82CircuitIDFormat | 1.3.6.1.4.1.10297.202.7000.7.5.4.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The circuit ID format of DHCP option 82
| |||||||||||||||||||||
| CdhcpServerOpt82CircuitID | 1.3.6.1.4.1.10297.202.7000.7.5.4.1.3 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The circuit ID of DHCP option 82 | |||||||||||||||||||||
| CdhcpServerOpt82RemoteIDFormat | 1.3.6.1.4.1.10297.202.7000.7.5.4.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The remote ID format of DHCP option 82
| |||||||||||||||||||||
| CdhcpServerOpt82RemoteID | 1.3.6.1.4.1.10297.202.7000.7.5.4.1.5 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The remote ID of DHCP option 82 | |||||||||||||||||||||
| CdhcpServerOpt82LowIP | 1.3.6.1.4.1.10297.202.7000.7.5.4.1.6 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The low IP address of DHCP option 82 | |||||||||||||||||||||
| CdhcpServerOpt82HighIP | 1.3.6.1.4.1.10297.202.7000.7.5.4.1.7 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The high IP address of DHCP option 82 | |||||||||||||||||||||
| CdhcpServerOpt82Mask | 1.3.6.1.4.1.10297.202.7000.7.5.4.1.8 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The subnet mask of DHCP option 82 | |||||||||||||||||||||
| CdhcpServerOpt82GW | 1.3.6.1.4.1.10297.202.7000.7.5.4.1.9 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The gateway of DHCP option 82 | |||||||||||||||||||||
| CdhcpServerOpt82DNS | 1.3.6.1.4.1.10297.202.7000.7.5.4.1.10 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The DNS of DHCP option 82 | |||||||||||||||||||||
| CdhcpServerOpt82Status | 1.3.6.1.4.1.10297.202.7000.7.5.4.1.11 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current If user set option82 setting with SNMP, the value would not apply to swith. They need to set active(1) to apply into switch.
| |||||||||||||||||||||
| CdhcpServerOpt82Clear | 1.3.6.1.4.1.10297.202.7000.7.5.4.1.12 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Clear IP poll on DHCP option 82
| |||||||||||||||||||||
| TdhcpServerLeaseTable | 1.3.6.1.4.1.10297.202.7000.7.5.5 | NA | |||||||||||||||||||
table · not-accessible · current The table of DHCP server lease entry | |||||||||||||||||||||
| RdhcpServerLeaseEntry | 1.3.6.1.4.1.10297.202.7000.7.5.5.1 | NA | |||||||||||||||||||
| CdhcpServerLeaseIndex | 1.3.6.1.4.1.10297.202.7000.7.5.5.1.1 | Integer32 (0..1000) | RO | ||||||||||||||||||
column · Integer32 (0..1000) · read-only · current The index of DHCP server lease entry | |||||||||||||||||||||
| CdhcpServerLeaseIp | 1.3.6.1.4.1.10297.202.7000.7.5.5.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The IP address of DHCP server lease entry | |||||||||||||||||||||
| CdhcpServerLeaseClientMac | 1.3.6.1.4.1.10297.202.7000.7.5.5.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The client MAC of DHCP server lease entry | |||||||||||||||||||||
| CdhcpServerLeaseStartTime | 1.3.6.1.4.1.10297.202.7000.7.5.5.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The start time of DHCP server lease entry | |||||||||||||||||||||
| CdhcpServerLeaseEndTime | 1.3.6.1.4.1.10297.202.7000.7.5.5.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The end time of DHCP server lease entry | |||||||||||||||||||||
| CdhcpServerLeaseType | 1.3.6.1.4.1.10297.202.7000.7.5.5.1.6 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The type of DHCP server lease entry | |||||||||||||||||||||
| SdhcpServerRestart | 1.3.6.1.4.1.10297.202.7000.7.5.6 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Restart DHCP Server
| |||||||||||||||||||||
| TdhcpServerVlanTable | 1.3.6.1.4.1.10297.202.7000.7.5.7 | NA | |||||||||||||||||||
table · not-accessible · current The table of DHCP VLAN setting | |||||||||||||||||||||
| RdhcpServerVlanEntry | 1.3.6.1.4.1.10297.202.7000.7.5.7.1 | NA | |||||||||||||||||||
| CdhcpServerVlanIndex | 1.3.6.1.4.1.10297.202.7000.7.5.7.1.1 | Integer32 (1..2) | RO | ||||||||||||||||||
column · Integer32 (1..2) · read-only · current The index of DHCP server VLAN setting | |||||||||||||||||||||
| CdhcpServerVlanId | 1.3.6.1.4.1.10297.202.7000.7.5.7.1.2 | Integer32 (1..4094) | RW | ||||||||||||||||||
column · Integer32 (1..4094) · read-write · current The VLAN ID of DHCP VLAN setting | |||||||||||||||||||||
| CdhcpServerVlanLowIP | 1.3.6.1.4.1.10297.202.7000.7.5.7.1.3 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The low IP address of DHCP VLAN | |||||||||||||||||||||
| CdhcpServerVlanHighIP | 1.3.6.1.4.1.10297.202.7000.7.5.7.1.4 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The high IP address of DHCP VLAN | |||||||||||||||||||||
| CdhcpServerVlanMask | 1.3.6.1.4.1.10297.202.7000.7.5.7.1.5 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The subnet mask of DHCP VLAN | |||||||||||||||||||||
| CdhcpServerVlanGW | 1.3.6.1.4.1.10297.202.7000.7.5.7.1.6 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The gateway of DHCP VLAN | |||||||||||||||||||||
| CdhcpServerVlanDNS | 1.3.6.1.4.1.10297.202.7000.7.5.7.1.7 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The DNS of DHCP VLAN | |||||||||||||||||||||
| CdhcpServerVlanStatus | 1.3.6.1.4.1.10297.202.7000.7.5.7.1.8 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current If user set VLAN setting with SNMP, the value would not apply to swith. They need to set active(1) to apply into switch.
| |||||||||||||||||||||
| CdhcpServerVlanClear | 1.3.6.1.4.1.10297.202.7000.7.5.7.1.9 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Clear IP poll on DHCP VLAN
| |||||||||||||||||||||
| TdhcpServerClientMacTable | 1.3.6.1.4.1.10297.202.7000.7.5.8 | NA | |||||||||||||||||||
table · not-accessible · current The table of DHCP client mac setting | |||||||||||||||||||||
| RdhcpServerClientMacEntry | 1.3.6.1.4.1.10297.202.7000.7.5.8.1 | NA | |||||||||||||||||||
row · not-accessible · current The entry of DHCP server client mac setting | |||||||||||||||||||||
| CdhcpServerClientMacEntryID | 1.3.6.1.4.1.10297.202.7000.7.5.8.1.1 | Integer32 (1..100) | RW | ||||||||||||||||||
column · Integer32 (1..100) · read-write · current The index of DHCP server client mac entry | |||||||||||||||||||||
| CdhcpServerClientMacEntryMac | 1.3.6.1.4.1.10297.202.7000.7.5.8.1.2 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The MAC address of DHCP server client mac entry. | |||||||||||||||||||||
| CdhcpServerClientMacEntryIP | 1.3.6.1.4.1.10297.202.7000.7.5.8.1.3 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The IP address of DHCP server client mac entry. | |||||||||||||||||||||
| CdhcpServerClientMacEntryMask | 1.3.6.1.4.1.10297.202.7000.7.5.8.1.4 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The subnet mask of DHCP DHCP server client mac entry. | |||||||||||||||||||||
| CdhcpServerClientMacEntryGW | 1.3.6.1.4.1.10297.202.7000.7.5.8.1.5 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The gateway of DHCP DHCP server client mac entry. | |||||||||||||||||||||
| CdhcpServerClientMacEntryDNS | 1.3.6.1.4.1.10297.202.7000.7.5.8.1.6 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The DNS of DHCP DHCP server client mac entry. | |||||||||||||||||||||
| CdhcpServerClientMacEntryRowStatus | 1.3.6.1.4.1.10297.202.7000.7.5.8.1.7 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current User can use createRequest(2) to create new entry. After setup the value, user use valid(1) to set into switch. User can use destory to invalid(4) an entry.
| |||||||||||||||||||||
| NsmtpClient | 1.3.6.1.4.1.10297.202.7000.7.6 | ||||||||||||||||||||
| SsmtpActiveProfile | 1.3.6.1.4.1.10297.202.7000.7.6.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The active profile of SMTP client
| |||||||||||||||||||||
| TsmtpProfileTable | 1.3.6.1.4.1.10297.202.7000.7.6.2 | NA | |||||||||||||||||||
table · not-accessible · current The table of SMTP client profile | |||||||||||||||||||||
| RsmtpProfileEntry | 1.3.6.1.4.1.10297.202.7000.7.6.2.1 | NA | |||||||||||||||||||
| CsmtpProfileIndex | 1.3.6.1.4.1.10297.202.7000.7.6.2.1.1 | Integer32 (1..2) | RO | ||||||||||||||||||
column · Integer32 (1..2) · read-only · current The index of SMTP client profile | |||||||||||||||||||||
| CsmtpServerIp | 1.3.6.1.4.1.10297.202.7000.7.6.2.1.2 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The SMTP server IP | |||||||||||||||||||||
| CsmtpServerPort | 1.3.6.1.4.1.10297.202.7000.7.6.2.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The SMTP server port | |||||||||||||||||||||
| CsmtpSenderMail | 1.3.6.1.4.1.10297.202.7000.7.6.2.1.4 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The SMTP sender mail | |||||||||||||||||||||
| CsmtpTargetMail1 | 1.3.6.1.4.1.10297.202.7000.7.6.2.1.5 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The SMTP target mail 1 | |||||||||||||||||||||
| CsmtpTargetMail2 | 1.3.6.1.4.1.10297.202.7000.7.6.2.1.6 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The SMTP target mail 2 | |||||||||||||||||||||
| CsmtpTargetMail3 | 1.3.6.1.4.1.10297.202.7000.7.6.2.1.7 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The SMTP target mail 3 | |||||||||||||||||||||
| CsmtpTargetMail4 | 1.3.6.1.4.1.10297.202.7000.7.6.2.1.8 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The SMTP target mail 4 | |||||||||||||||||||||
| CsmtpTargetMail5 | 1.3.6.1.4.1.10297.202.7000.7.6.2.1.9 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The SMTP target mail 5 | |||||||||||||||||||||
| CsmtpTargetMail6 | 1.3.6.1.4.1.10297.202.7000.7.6.2.1.10 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The SMTP target mail 6 | |||||||||||||||||||||
| CsmtpTargetMail7 | 1.3.6.1.4.1.10297.202.7000.7.6.2.1.11 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The SMTP target mail 7 | |||||||||||||||||||||
| CsmtpTargetMail8 | 1.3.6.1.4.1.10297.202.7000.7.6.2.1.12 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The SMTP target mail 8 | |||||||||||||||||||||
| Nrmon | 1.3.6.1.4.1.10297.202.7000.7.7 | ||||||||||||||||||||
| TrmonStatisticsTable | 1.3.6.1.4.1.10297.202.7000.7.7.1 | NA | |||||||||||||||||||
table · not-accessible · current The table of RMON Statistics | |||||||||||||||||||||
| RrmonStatisticsEntry | 1.3.6.1.4.1.10297.202.7000.7.7.1.1 | NA | |||||||||||||||||||
| CrmonStatisticsIndex | 1.3.6.1.4.1.10297.202.7000.7.7.1.1.1 | Integer32 (1..65535) | RW | ||||||||||||||||||
column · Integer32 (1..65535) · read-write · current The index of RMON Statistics | |||||||||||||||||||||
| CrmonStatisticsPort | 1.3.6.1.4.1.10297.202.7000.7.7.1.1.2 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The port number of RMON Statistics | |||||||||||||||||||||
| CrmonStatisticsDropEvents | 1.3.6.1.4.1.10297.202.7000.7.7.1.1.3 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current The drop events of RMON Statistics | |||||||||||||||||||||
| CrmonStatisticsOctets | 1.3.6.1.4.1.10297.202.7000.7.7.1.1.4 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current The octets of RMON Statistics | |||||||||||||||||||||
| CrmonStatisticsPackets | 1.3.6.1.4.1.10297.202.7000.7.7.1.1.5 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current The packets of RMON Statistics | |||||||||||||||||||||
| CrmonStatisticsBroadcast | 1.3.6.1.4.1.10297.202.7000.7.7.1.1.6 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current The broadcast of RMON Statistics | |||||||||||||||||||||
| CrmonStatisticsMulticast | 1.3.6.1.4.1.10297.202.7000.7.7.1.1.7 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current The multicast of RMON Statistics | |||||||||||||||||||||
| CrmonStatisticsOwner | 1.3.6.1.4.1.10297.202.7000.7.7.1.1.8 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The owner of RMON Statistics | |||||||||||||||||||||
| CrmonStatisticsRowStatus | 1.3.6.1.4.1.10297.202.7000.7.7.1.1.9 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current User can use createRequest(2) to create new entry. After setup the value, user use valid(1) to set into switch. User can use destory to invalid(4) an entry.
| |||||||||||||||||||||
| TrmonHistoryTable | 1.3.6.1.4.1.10297.202.7000.7.7.2 | NA | |||||||||||||||||||
table · not-accessible · current The table of RMON history | |||||||||||||||||||||
| RrmonHistoryEntry | 1.3.6.1.4.1.10297.202.7000.7.7.2.1 | NA | |||||||||||||||||||
| CrmonHistoryIndex | 1.3.6.1.4.1.10297.202.7000.7.7.2.1.1 | Integer32 (1..65535) | RW | ||||||||||||||||||
column · Integer32 (1..65535) · read-write · current The index of RMON history | |||||||||||||||||||||
| CrmonHistoryPort | 1.3.6.1.4.1.10297.202.7000.7.7.2.1.2 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The port number of RMON history | |||||||||||||||||||||
| CrmonHistoryBucketsRequest | 1.3.6.1.4.1.10297.202.7000.7.7.2.1.3 | Integer32 (1..50) | RW | ||||||||||||||||||
column · Integer32 (1..50) · read-write · current The buckets requested of RMON history | |||||||||||||||||||||
| CrmonHistoryInterval | 1.3.6.1.4.1.10297.202.7000.7.7.2.1.5 | Integer32 (1..3600) | RW | ||||||||||||||||||
column · Integer32 (1..3600) · read-write · current The index of RMON history | |||||||||||||||||||||
| CrmonHistoryOwner | 1.3.6.1.4.1.10297.202.7000.7.7.2.1.6 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The port number of RMON history | |||||||||||||||||||||
| CrmonHistoryRowStatus | 1.3.6.1.4.1.10297.202.7000.7.7.2.1.7 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current User can use createRequest(2) to create new entry. After setup the value, user use valid(1) to set into switch. User can use destory to invalid(4) an entry.
| |||||||||||||||||||||
| TrmonAlarmTable | 1.3.6.1.4.1.10297.202.7000.7.7.3 | NA | |||||||||||||||||||
table · not-accessible · current The table of RMON alarm | |||||||||||||||||||||
| RrmonAlarmEntry | 1.3.6.1.4.1.10297.202.7000.7.7.3.1 | NA | |||||||||||||||||||
| CrmonAlarmIndex | 1.3.6.1.4.1.10297.202.7000.7.7.3.1.1 | Integer32 (1..65535) | RW | ||||||||||||||||||
column · Integer32 (1..65535) · read-write · current The index of RMON alarm | |||||||||||||||||||||
| CrmonAlarmInterval | 1.3.6.1.4.1.10297.202.7000.7.7.3.1.2 | Integer32 (1..2147483647) | RW | ||||||||||||||||||
column · Integer32 (1..2147483647) · read-write · current The interval of RMON alarm | |||||||||||||||||||||
| CrmonAlarmVariable | 1.3.6.1.4.1.10297.202.7000.7.7.3.1.3 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The variable of RMON alarm | |||||||||||||||||||||
| CrmonAlarmSampleType | 1.3.6.1.4.1.10297.202.7000.7.7.3.1.4 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The sample type of RMON alarm
| |||||||||||||||||||||
| CrmonAlarmRisingThreshold | 1.3.6.1.4.1.10297.202.7000.7.7.3.1.5 | Integer32 (1..2147483647) | RW | ||||||||||||||||||
column · Integer32 (1..2147483647) · read-write · current The rising threshold of RMON alarm | |||||||||||||||||||||
| CrmonAlarmFallingThreshold | 1.3.6.1.4.1.10297.202.7000.7.7.3.1.6 | Integer32 (1..2147483647) | RW | ||||||||||||||||||
column · Integer32 (1..2147483647) · read-write · current The falling threshold of RMON alarm | |||||||||||||||||||||
| CrmonAlarmRisingEventIndex | 1.3.6.1.4.1.10297.202.7000.7.7.3.1.7 | Integer32 (1..65535) | RW | ||||||||||||||||||
column · Integer32 (1..65535) · read-write · current The rising event index of RMON alarm | |||||||||||||||||||||
| CrmonAlarmFallingEventIndex | 1.3.6.1.4.1.10297.202.7000.7.7.3.1.8 | Integer32 (1..65535) | RW | ||||||||||||||||||
column · Integer32 (1..65535) · read-write · current The falling event indx of RMON alarm | |||||||||||||||||||||
| CrmonAlarmOwner | 1.3.6.1.4.1.10297.202.7000.7.7.3.1.9 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The owner of RMON alarm | |||||||||||||||||||||
| CrmonAlarmRowStatus | 1.3.6.1.4.1.10297.202.7000.7.7.3.1.10 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current User can use createRequest(2) to create new entry. After setup the value, user use valid(1) to set into switch. User can use destory to invalid(4) an entry.
| |||||||||||||||||||||
| TrmonEventTable | 1.3.6.1.4.1.10297.202.7000.7.7.4 | NA | |||||||||||||||||||
table · not-accessible · current The table of RMON event | |||||||||||||||||||||
| RrmonEventEntry | 1.3.6.1.4.1.10297.202.7000.7.7.4.1 | NA | |||||||||||||||||||
| CrmonEventIndex | 1.3.6.1.4.1.10297.202.7000.7.7.4.1.1 | Integer32 (1..65535) | RW | ||||||||||||||||||
column · Integer32 (1..65535) · read-write · current The index of RMON event | |||||||||||||||||||||
| CrmonEventDescription | 1.3.6.1.4.1.10297.202.7000.7.7.4.1.2 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The description of RMON event | |||||||||||||||||||||
| CrmonEventType | 1.3.6.1.4.1.10297.202.7000.7.7.4.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The type of RMON event
| |||||||||||||||||||||
| CrmonEventCommunity | 1.3.6.1.4.1.10297.202.7000.7.7.4.1.4 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The community of RMON event | |||||||||||||||||||||
| CrmonEventOwner | 1.3.6.1.4.1.10297.202.7000.7.7.4.1.5 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The owner of RMON event | |||||||||||||||||||||
| CrmonEventRowStatus | 1.3.6.1.4.1.10297.202.7000.7.7.4.1.7 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current User can use createRequest(2) to create new entry. After setup the value, user use valid(1) to set into switch. User can use destory to invalid(4) an entry.
| |||||||||||||||||||||
| Nntp | 1.3.6.1.4.1.10297.202.7000.7.8 | ||||||||||||||||||||
| SntpServer | 1.3.6.1.4.1.10297.202.7000.7.8.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current enable/disable NTP server.
| |||||||||||||||||||||
| SntpManualTime | 1.3.6.1.4.1.10297.202.7000.7.8.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current enable/disable NTP manual time.
| |||||||||||||||||||||
| TntpServerTable | 1.3.6.1.4.1.10297.202.7000.7.8.3 | NA | |||||||||||||||||||
table · not-accessible · current The table of NTP server | |||||||||||||||||||||
| RntpServerEntry | 1.3.6.1.4.1.10297.202.7000.7.8.3.1 | NA | |||||||||||||||||||
| CntpServerIndex | 1.3.6.1.4.1.10297.202.7000.7.8.3.1.1 | Integer32 (1..10) | RO | ||||||||||||||||||
column · Integer32 (1..10) · read-only · current The index of NTP server | |||||||||||||||||||||
| CntpServerIp | 1.3.6.1.4.1.10297.202.7000.7.8.3.1.2 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The ip address of NTP server | |||||||||||||||||||||
| Ndiagnostics | 1.3.6.1.4.1.10297.202.7000.8 | ||||||||||||||||||||
| NcopperTest | 1.3.6.1.4.1.10297.202.7000.8.1 | ||||||||||||||||||||
| SportNumber | 1.3.6.1.4.1.10297.202.7000.8.1.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The port ID for copper test | |||||||||||||||||||||
| ScopperTestAction | 1.3.6.1.4.1.10297.202.7000.8.1.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Copper test action
| |||||||||||||||||||||
| NcopperTestResult | 1.3.6.1.4.1.10297.202.7000.8.1.3 | ||||||||||||||||||||
| SresultPort | 1.3.6.1.4.1.10297.202.7000.8.1.3.1 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The copper test port ID | |||||||||||||||||||||
| SchannelA | 1.3.6.1.4.1.10297.202.7000.8.1.3.2 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The copper test result for channel A | |||||||||||||||||||||
| ScableLengthA | 1.3.6.1.4.1.10297.202.7000.8.1.3.3 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The copper test result for cable length A | |||||||||||||||||||||
| SchannelB | 1.3.6.1.4.1.10297.202.7000.8.1.3.4 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The copper test result for channel B | |||||||||||||||||||||
| ScableLengthB | 1.3.6.1.4.1.10297.202.7000.8.1.3.5 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The copper test result forcable length B | |||||||||||||||||||||
| SchannelC | 1.3.6.1.4.1.10297.202.7000.8.1.3.6 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The copper test result for channel C | |||||||||||||||||||||
| ScableLengthC | 1.3.6.1.4.1.10297.202.7000.8.1.3.7 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The copper test result for cable length C | |||||||||||||||||||||
| SchannelD | 1.3.6.1.4.1.10297.202.7000.8.1.3.8 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The copper test result for channel D | |||||||||||||||||||||
| ScableLengthD | 1.3.6.1.4.1.10297.202.7000.8.1.3.9 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The copper test result for cable length D | |||||||||||||||||||||
| SchannelRx | 1.3.6.1.4.1.10297.202.7000.8.1.3.10 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The copper test result for channel Rx | |||||||||||||||||||||
| ScableLengthRx | 1.3.6.1.4.1.10297.202.7000.8.1.3.11 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The copper test result for cable length Rx | |||||||||||||||||||||
| SchannelTx | 1.3.6.1.4.1.10297.202.7000.8.1.3.12 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The copper test result for channel Tx | |||||||||||||||||||||
| ScableLengthTx | 1.3.6.1.4.1.10297.202.7000.8.1.3.13 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The copper test result for cable length Tx | |||||||||||||||||||||
| NpingTest | 1.3.6.1.4.1.10297.202.7000.8.2 | ||||||||||||||||||||
| SpingIPAddress | 1.3.6.1.4.1.10297.202.7000.8.2.1 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current The IP address or hostname of ping target | |||||||||||||||||||||
| SpingCount | 1.3.6.1.4.1.10297.202.7000.8.2.2 | Integer32 (1..5) | RW | ||||||||||||||||||
scalar · Integer32 (1..5) · read-write · current How many times to send ping request packets | |||||||||||||||||||||
| SpingInterval | 1.3.6.1.4.1.10297.202.7000.8.2.3 | Integer32 (1..5) | RW | ||||||||||||||||||
scalar · Integer32 (1..5) · read-write · current Time interval between each ping request packets | |||||||||||||||||||||
| SpingSize | 1.3.6.1.4.1.10297.202.7000.8.2.4 | Integer32 (8..5120) | RW | ||||||||||||||||||
scalar · Integer32 (8..5120) · read-write · current The size of ping packet | |||||||||||||||||||||
| SpingAction | 1.3.6.1.4.1.10297.202.7000.8.2.5 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The ping action
| |||||||||||||||||||||
| SpingResult | 1.3.6.1.4.1.10297.202.7000.8.2.6 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current After ping finished, results will show in this OID | |||||||||||||||||||||
| Nipv6pingTest | 1.3.6.1.4.1.10297.202.7000.8.3 | ||||||||||||||||||||
| SpingIPv6Address | 1.3.6.1.4.1.10297.202.7000.8.3.1 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current The IPv6 address of ping target | |||||||||||||||||||||
| SpingIPv6Count | 1.3.6.1.4.1.10297.202.7000.8.3.2 | Integer32 (1..5) | RW | ||||||||||||||||||
scalar · Integer32 (1..5) · read-write · current How many times to send ping request packet | |||||||||||||||||||||
| SpingIPv6Interval | 1.3.6.1.4.1.10297.202.7000.8.3.3 | Integer32 (1..5) | RW | ||||||||||||||||||
scalar · Integer32 (1..5) · read-write · current Time interval between each ping request packet | |||||||||||||||||||||
| SpingIPv6Size | 1.3.6.1.4.1.10297.202.7000.8.3.4 | Integer32 (8..5120) | RW | ||||||||||||||||||
scalar · Integer32 (8..5120) · read-write · current The size of ping packet | |||||||||||||||||||||
| SpingIPv6Action | 1.3.6.1.4.1.10297.202.7000.8.3.5 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The IPv6 ping action
| |||||||||||||||||||||
| SpingIPv6Result | 1.3.6.1.4.1.10297.202.7000.8.3.6 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current After ping finished, results will show in this field | |||||||||||||||||||||
| NloggingSetting | 1.3.6.1.4.1.10297.202.7000.8.4 | ||||||||||||||||||||
| SloggingService | 1.3.6.1.4.1.10297.202.7000.8.4.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable/Disable logging system
| |||||||||||||||||||||
| TlocalLoggingTable | 1.3.6.1.4.1.10297.202.7000.8.4.2 | NA | |||||||||||||||||||
table · not-accessible · current The table of local logging | |||||||||||||||||||||
| RlocalLoggingEntry | 1.3.6.1.4.1.10297.202.7000.8.4.2.1 | NA | |||||||||||||||||||
| ClocalLoggingIndex | 1.3.6.1.4.1.10297.202.7000.8.4.2.1.1 | Integer32 (1..3) | RO | ||||||||||||||||||
column · Integer32 (1..3) · read-only · current The index of local logging | |||||||||||||||||||||
| Cbufferedtarget | 1.3.6.1.4.1.10297.202.7000.8.4.2.1.2 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current The target to store log message Buffered: Store log messages in device buffer. File: Store log message in file. Console: Show the log message on console.
| |||||||||||||||||||||
| ClocalLoggingStatus | 1.3.6.1.4.1.10297.202.7000.8.4.2.1.3 | INTEGER | RO | ||||||||||||||||||
column · INTEGER · read-only · current Enable/Disable status the logging system
| |||||||||||||||||||||
| ClocalLoggingSeverity | 1.3.6.1.4.1.10297.202.7000.8.4.2.1.4 | Bits | RW | ||||||||||||||||||
column · Bits · read-write · current Severity of log message which will be stored
| |||||||||||||||||||||
| TremoteloggingTable | 1.3.6.1.4.1.10297.202.7000.8.4.3 | NA | |||||||||||||||||||
table · not-accessible · current The table of remote logging | |||||||||||||||||||||
| RremoteloggingEntry | 1.3.6.1.4.1.10297.202.7000.8.4.3.1 | NA | |||||||||||||||||||
| CremoteloggingIndex | 1.3.6.1.4.1.10297.202.7000.8.4.3.1.1 | Integer32 (1..8) | RO | ||||||||||||||||||
column · Integer32 (1..8) · read-only · current The index of remote logging | |||||||||||||||||||||
| CremoteloggingAddress | 1.3.6.1.4.1.10297.202.7000.8.4.3.1.2 | IpAddress | RW | ||||||||||||||||||
column · IpAddress · read-write · current The IP address of remote log server | |||||||||||||||||||||
| CremoteloggingPort | 1.3.6.1.4.1.10297.202.7000.8.4.3.1.3 | Integer32 (1..65535) | RW | ||||||||||||||||||
column · Integer32 (1..65535) · read-write · current The port number of remote log server | |||||||||||||||||||||
| CremoteloggingSeverity | 1.3.6.1.4.1.10297.202.7000.8.4.3.1.4 | Bits | RW | ||||||||||||||||||
column · Bits · read-write · current The severity of log messages which will be sent
| |||||||||||||||||||||
| CremoteloggingFacility | 1.3.6.1.4.1.10297.202.7000.8.4.3.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The facility of log messages which will be sent
| |||||||||||||||||||||
| CremoteloggingRowStatus | 1.3.6.1.4.1.10297.202.7000.8.4.3.1.99 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current User can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
| |||||||||||||||||||||
| NfactoryDefault | 1.3.6.1.4.1.10297.202.7000.8.5 | ||||||||||||||||||||
| SfactoryDefaultAction | 1.3.6.1.4.1.10297.202.7000.8.5.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current user to restore switch to factory default
| |||||||||||||||||||||
| SfactoryDefaultKeepFlag | 1.3.6.1.4.1.10297.202.7000.8.5.2 | Bits | RW | ||||||||||||||||||
scalar · Bits · read-write · current Keep setting when switch is restore to factory default.
| |||||||||||||||||||||
| Nreboot | 1.3.6.1.4.1.10297.202.7000.8.6 | ||||||||||||||||||||
| SrebootAction | 1.3.6.1.4.1.10297.202.7000.8.6.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current user to reboot the switch
| |||||||||||||||||||||
| NdhcpAutoProvision | 1.3.6.1.4.1.10297.202.7000.8.7 | ||||||||||||||||||||
| SdhcpAutoProvisionEnable | 1.3.6.1.4.1.10297.202.7000.8.7.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The status of DHCP auto provision
| |||||||||||||||||||||
| NledIndication | 1.3.6.1.4.1.10297.202.7000.8.8 | ||||||||||||||||||||
| SledAlarmState | 1.3.6.1.4.1.10297.202.7000.8.8.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable/Disable LED alarm
| |||||||||||||||||||||
| SledPowerFailureEvent | 1.3.6.1.4.1.10297.202.7000.8.8.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable/Disable LED power failure event
| |||||||||||||||||||||
| SledFiberLinkdownEvent | 1.3.6.1.4.1.10297.202.7000.8.8.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable/Disable LED fiber port Link down event
| |||||||||||||||||||||
| SledPortLinkdownEvent | 1.3.6.1.4.1.10297.202.7000.8.8.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Enable/Disable LED port Link down event
| |||||||||||||||||||||
| SledPortLinkdownEventPort | 1.3.6.1.4.1.10297.202.7000.8.8.5 | Bits | RW | ||||||||||||||||||
scalar · Bits · read-write · current The member ports of LED port Link down event
| |||||||||||||||||||||
| TledEventInfoTable | 1.3.6.1.4.1.10297.202.7000.8.8.6 | NA | |||||||||||||||||||
table · not-accessible · current The table of led event info | |||||||||||||||||||||
| RledEventInfoEntry | 1.3.6.1.4.1.10297.202.7000.8.8.6.1 | NA | |||||||||||||||||||
| CledEventIndex | 1.3.6.1.4.1.10297.202.7000.8.8.6.1.1 | Integer32 (1..3) | RO | ||||||||||||||||||
column · Integer32 (1..3) · read-only · current The index of led event info | |||||||||||||||||||||
| CledType | 1.3.6.1.4.1.10297.202.7000.8.8.6.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The type of led event info | |||||||||||||||||||||
| CledEvent | 1.3.6.1.4.1.10297.202.7000.8.8.6.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The event of led event info | |||||||||||||||||||||
| CledState | 1.3.6.1.4.1.10297.202.7000.8.8.6.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The state of led event info | |||||||||||||||||||||
| CledErrorTimes | 1.3.6.1.4.1.10297.202.7000.8.8.6.1.5 | Integer32 (0..65535) | RO | ||||||||||||||||||
column · Integer32 (0..65535) · read-only · current The error times of led event info | |||||||||||||||||||||
| Nmaintenance | 1.3.6.1.4.1.10297.202.7000.9 | ||||||||||||||||||||
| NbackupManager | 1.3.6.1.4.1.10297.202.7000.9.1 | ||||||||||||||||||||
| SbackupMethod | 1.3.6.1.4.1.10297.202.7000.9.1.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The method of backup file
| |||||||||||||||||||||
| SbackupServerIP | 1.3.6.1.4.1.10297.202.7000.9.1.2 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current The IP address of the TFTP server | |||||||||||||||||||||
| SbackupType | 1.3.6.1.4.1.10297.202.7000.9.1.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The backup configuration type
| |||||||||||||||||||||
| SbackupImage | 1.3.6.1.4.1.10297.202.7000.9.1.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The backup firmware image
| |||||||||||||||||||||
| SbackupAction | 1.3.6.1.4.1.10297.202.7000.9.1.5 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The backup action
| |||||||||||||||||||||
| NupgradeManager | 1.3.6.1.4.1.10297.202.7000.9.2 | ||||||||||||||||||||
| SupgradeMethod | 1.3.6.1.4.1.10297.202.7000.9.2.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The upgrade file method
| |||||||||||||||||||||
| SupgradeServerIP | 1.3.6.1.4.1.10297.202.7000.9.2.2 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current The server IP address | |||||||||||||||||||||
| SupgradeFileName | 1.3.6.1.4.1.10297.202.7000.9.2.3 | DisplayString | RW | ||||||||||||||||||
scalar · DisplayString · read-write · current The upgrade file name | |||||||||||||||||||||
| SupgradeType | 1.3.6.1.4.1.10297.202.7000.9.2.4 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The upgrade type
| |||||||||||||||||||||
| SupgradeImage | 1.3.6.1.4.1.10297.202.7000.9.2.5 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The uprade firmware image
| |||||||||||||||||||||
| SupgradeAction | 1.3.6.1.4.1.10297.202.7000.9.2.6 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The upgrade action
| |||||||||||||||||||||
| SupgradeStatus | 1.3.6.1.4.1.10297.202.7000.9.2.7 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The upgrade status
| |||||||||||||||||||||
| NdualImage | 1.3.6.1.4.1.10297.202.7000.9.3 | ||||||||||||||||||||
| SactiveImage | 1.3.6.1.4.1.10297.202.7000.9.3.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The active image
| |||||||||||||||||||||
| TimageInfoTable | 1.3.6.1.4.1.10297.202.7000.9.3.2 | NA | |||||||||||||||||||
table · not-accessible · current The table of image info | |||||||||||||||||||||
| RimageInfoEntry | 1.3.6.1.4.1.10297.202.7000.9.3.2.1 | NA | |||||||||||||||||||
| CflashPartition | 1.3.6.1.4.1.10297.202.7000.9.3.2.1.1 | Integer32 (0..2) | RO | ||||||||||||||||||
column · Integer32 (0..2) · read-only · current The FLASH partition | |||||||||||||||||||||
| CimageName | 1.3.6.1.4.1.10297.202.7000.9.3.2.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The image name | |||||||||||||||||||||
| CimageSize | 1.3.6.1.4.1.10297.202.7000.9.3.2.1.3 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current The image size | |||||||||||||||||||||
| CcreatedTime | 1.3.6.1.4.1.10297.202.7000.9.3.2.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The FW creation time | |||||||||||||||||||||
| CimageVersion | 1.3.6.1.4.1.10297.202.7000.9.3.2.1.5 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The image version | |||||||||||||||||||||
| NconfigurationManager | 1.3.6.1.4.1.10297.202.7000.9.4 | ||||||||||||||||||||
| SsourceFile | 1.3.6.1.4.1.10297.202.7000.9.4.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The configuration source file
| |||||||||||||||||||||
| SdestinationFile | 1.3.6.1.4.1.10297.202.7000.9.4.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The configuration destination file
| |||||||||||||||||||||
| SsaveConfiguration | 1.3.6.1.4.1.10297.202.7000.9.4.3 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Save the current configuration
| |||||||||||||||||||||
| NaccountManager | 1.3.6.1.4.1.10297.202.7000.9.5 | ||||||||||||||||||||
| TlocalUserTable | 1.3.6.1.4.1.10297.202.7000.9.5.1 | NA | |||||||||||||||||||
table · not-accessible · current The table of local user | |||||||||||||||||||||
| RlocalUserEntry | 1.3.6.1.4.1.10297.202.7000.9.5.1.1 | NA | |||||||||||||||||||
| ClocalUserIndex | 1.3.6.1.4.1.10297.202.7000.9.5.1.1.1 | Integer32 (1..32) | RO | ||||||||||||||||||
column · Integer32 (1..32) · read-only · current The index of local user | |||||||||||||||||||||
| ClocalUserName | 1.3.6.1.4.1.10297.202.7000.9.5.1.1.2 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The user name of local user | |||||||||||||||||||||
| ClocalUserPasswordType | 1.3.6.1.4.1.10297.202.7000.9.5.1.1.3 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The pasword type of local user
| |||||||||||||||||||||
| ClocalUserPassword | 1.3.6.1.4.1.10297.202.7000.9.5.1.1.4 | DisplayString | RW | ||||||||||||||||||
column · DisplayString · read-write · current The password of local user | |||||||||||||||||||||
| ClocalUserPrivilegeType | 1.3.6.1.4.1.10297.202.7000.9.5.1.1.5 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The privilege type of local user
| |||||||||||||||||||||
| ClocalUserRowStatus | 1.3.6.1.4.1.10297.202.7000.9.5.1.1.99 | INTEGER | RC | ||||||||||||||||||
column · INTEGER · read-create · current User can use createAndWait(5) to create new entry. After setup the value, user use active(1) to set into switch. User can use destory to delete(6) an entry.
| |||||||||||||||||||||
| NnKey | 1.3.6.1.4.1.10297.202.7000.9.6 | ||||||||||||||||||||
| SnKeyAutoMode | 1.3.6.1.4.1.10297.202.7000.9.6.1 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current The auto mode of N-Key.
| |||||||||||||||||||||
| SnKeyStatus | 1.3.6.1.4.1.10297.202.7000.9.6.2 | INTEGER | RW | ||||||||||||||||||
scalar · INTEGER · read-write · current Select N-key is idle or backup the current configurations to N-Key or restore N-Key's configurations to switch. The fourth option is read-only.
| |||||||||||||||||||||
| Ntraps | 1.3.6.1.4.1.10297.202.7000.99 | ||||||||||||||||||||
| NtrapObject | 1.3.6.1.4.1.10297.202.7000.99.1 | ||||||||||||||||||||
| SddmiAlarmDescr | 1.3.6.1.4.1.10297.202.7000.99.1.1 | DisplayString | RO | ||||||||||||||||||
scalar · DisplayString · read-only · current The description of DDMI trap | |||||||||||||||||||||
| SxRingMasterStatus | 1.3.6.1.4.1.10297.202.7000.99.1.2 | INTEGER | RO | ||||||||||||||||||
scalar · INTEGER · read-only · current The status of XRing Pro Master.
| |||||||||||||||||||||
| !ddmiAlarmWarning | 1.3.6.1.4.1.10297.202.7000.99.2 | ||||||||||||||||||||
| !xRingProMasterChange | 1.3.6.1.4.1.10297.202.7000.99.3 | ||||||||||||||||||||
notification · current This trap is sent if XRing Pro master change
| |||||||||||||||||||||
| !stpStateChange | 1.3.6.1.4.1.10297.202.7000.99.5 | ||||||||||||||||||||
notification · current This trap is sent if spanning tree port state change to blocking or forwarding
| |||||||||||||||||||||
Traps / Notifications
- ddmiAlarmWarning
1.3.6.1.4.1.10297.202.7000.99.2 - stpStateChange
1.3.6.1.4.1.10297.202.7000.99.5 - xRingProMasterChange
1.3.6.1.4.1.10297.202.7000.99.3