OS-COMMON-TC-MIB
Optical Access Inc.This MIB module defines the textual conventions used throughout the all os... and nb... MIB modules. Copyright 2018 ADVA Optical Networking SE. All rights reserved.
snmptranslate -m OS-COMMON-TC-MIB -Tpsnmpwalk -v2c -c <community> -m OS-COMMON-TC-MIB <host> 1.3.6.1.4.1.6926.2.6400Imports
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
|---|---|
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Nnbase | 1.3.6.1.4.1.629 | |||
| NnbSwitchG1 | 1.3.6.1.4.1.629.1 | |||
| NnbSwitchG1Il | 1.3.6.1.4.1.629.1.50 | |||
| Nadva | 1.3.6.1.4.1.629.2544 | |||
| Noaccess | 1.3.6.1.4.1.6926 | |||
| NoaOptiSwitch | 1.3.6.1.4.1.6926.2 | |||
| IosCommonTcMib | 1.3.6.1.4.1.6926.2.6400 | |||
identity This MIB module defines the textual conventions used throughout the all os... and nb... MIB modules. Copyright 2018 ADVA Optical Networking SE. All rights reserved. | ||||
Textual conventions
BwAccountStatusINTEGERclear(2)disabled(4)enabled(3)unknown(1)Status of accounting for a service/flow. An agent always returns value enabled(3) or value disabled(4) as a response on GET operation. For SET operation all 3 values are valid.
CfmMDLevelInteger32 (-1 | 0..7)Display hint:
dIs an extension of Dot1agCfmMDLevel - value -1 means undefined. Integer identifying the Maintenance Domain Level (MD Level). Higher numbers correspond to higher Maintenance Domains, those with the greatest physical reach, with the highest values for customers' CFM PDUs. Lower numbers correspond to lower Maintenance Domains, those with more limited physical reach, with the lowest values for CFM PDUs protecting single bridges or physical links. The value '-1' means, that MD Level is undefined.
CoSUnsigned32 (1..4294967295)Display hint:
dThe value of Class of Service (also referred to as of service level). While in devices it also defines an egress queue, the upper limit may be greater then 7. Actual upper limit may be read in osEthMaxSlValue.
EntityNameOCTET STRING (SIZE (1..30))Display hint:
255aAn octet string containing administrative information in human-readable form. Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. Additional restrictions are: - NUL, LF, CR, BEL, BS, HT, VT and FF are prohibited - SP (White space) and '?' (Question mark) are strictly forbidden.
EntityNameOrNoneOCTET STRING (SIZE (0..30))Display hint:
255aExtends EntityName wth empty value.
EntryValidatorINTEGERcreate(4)delete(3)nothing(2)unknown(1)Admin Status for controlling of the entry.
MepListOCTET STRING (SIZE (0..512))Each octet within this value specifies a set of eight remote MEPs, with the first octet specifying remote MEP IDs 1 through 8, the second octet specifying remote MEP IDs 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered remote MEP Id, and the least significant bit represents the highest numbered remote MEP Id. Thus, each remote MEP Id is represented by a single bit within the value of this object. If that bit has a value of '1', then that remote MEP Id is included in the list; the remote MEP Id is not included if its bit has a value of '0'.
OsCfmMepIdOrZeroUnsigned32 (0 | 1..4095)Display hint:
dMaintenance association End Point Identifier (MEPID): A small integer, unique over a given Maintenance Association, identifying a specific MEP. The special value 0 is allowed to indicate special cases, for example that no MEPID is configured. Whenever an object is defined with this SYNTAX, then the DESCRIPTION clause of such an object MUST specify what the special value of 0 means. This object is different from Dot1agCfmMepIdOrZero that its upper limit is 4K instead of 8K.
PortIndexUnsigned32 (1..2147483647)Display hint:
dA unique value, greater than zero, for each Port or in the managed system. The value for each Port must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. Actual limit is SNMP object osPortCfgMaxNumberOfPort. All Ports with PortIndex greater or equal osPortCfgBaseTrunkPortIndex are Ethernet Channels.
PortIndexOrNoneInteger32 (0 | 1..2147483647)Display hint:
dSee PortIndex, it is his extension for a case of <None>.
PortListOCTET STRING (SIZE (0..32))Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1', then that port is included in the set of ports; the port is not included if its bit has a value of '0'.
ProfileStatusINTEGERbusy(5)free(6)underProcessing(9)unknown(1)Status of a profile, reported it's being busy: the profile is busy, it there is at least one service, using it.
RespTypeINTEGERgeneric(2)regular(1)unknown(0)Indicates the type of the responer: - regular(1): The test was run against regular loopback device. - generic(2): The test was run against generic loopback device.
ServFlowIdUnsigned32 (0 | 1..4294967295)Display hint:
dThe value 0 means, that this entry corresponds to the service, not to to any flow.
ServiceTypeINTEGERlegacyEpLan(4)legacyEvpLan(5)portBasedENni(11)portBasedINni(9)portBasedUni(2)unknown(1)vlanBasedENni(10)vlanBasedINni(8)vlanBasedUni(3)Type of the service per node. portBasedUni(2) - port based UNI (epl, ep-lan) vlanBasedUni(3) - vlan based UNI (evpl, evp-lan) legacyEpLan (4) - for backward conpatibility, see below legacyEvpLan(5) - for backward conpatibility, see below vlanBasedINni(8) - vlan based internal NNI (former aggregation) portBasedINni(9) - port based internal NNI vlanBasedENni(8) - vlan based external NNI portBasedENni(9) - port based external NNI There is at least one difference between internal NNI and external NNI: if a service does not contain MEP and contains only MIP, then MA does not have c-ports in an internal NNI.
StartTimeTypeINTEGERfixed(4)immediate(2)none(1)relative(3)This enumeration data type indicates the type of start time to indicate when a performance metric is initiated. The valid enumerated values associated with this type are: none(1) The PM is never started immediate(2) The PM is to begin immediately relative(3) The PM is to begin a relative time from the current time fixed(4) The PM is to begin at the given UTC time/date
TagListOCTET STRING (SIZE (0..512))Each octet within this value specifies a set of eight tags, with the first octet specifying tags 1 through 8, the second octet specifying tags 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered tag, and the least significant bit represents the highest numbered tag. Thus, each tag is represented by a single bit within the value of this object. If that bit has a value of '1', then that tag is included in the set of tags; the tag is not included if its bit has a value of '0'.