F3-PWE3-MIB
ADVA AG Optical NetworkingThis module provides the F3 Pseudo Wire definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
snmptranslate -m F3-PWE3-MIB -Tpsnmpwalk -v2c -c <community> -m F3-PWE3-MIB <host> 1.3.6.1.4.1.2544.1.12.19Imports
| ADVA-MIB | fsp150cm |
|---|---|
| CM-COMMON-MIB | AdminState, CmPmBinAction, CmPmIntervalType, IpPriorityMapMode, IpVersion, OperationalState, PerfCounter64, SecondaryState, VlanId, VlanPriority |
| CM-ENTITY-MIB | neIndex, shelfIndex, slotIndex |
| CM-FACILITY-MIB | cmEthernetAccPortIndex, cmEthernetNetPortIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, MacAddress, PhysAddress, RowStatus, StorageType, TEXTUAL-CONVENTION, TruthValue, VariablePointer |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| If3Pwe3MIB | 1.3.6.1.4.1.2544.1.12.19 | |||
identity This module provides the F3 Pseudo Wire definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking. | ||||
| Nf3Pwe3ConfigObjects | 1.3.6.1.4.1.2544.1.12.19.1 | |||
| Tf3Pwe3IdlePatternProfileTable | 1.3.6.1.4.1.2544.1.12.19.1.1 | NA | ||
table · not-accessible · current A list of entries corresponding to the PWE3 Idle Pattern Profile entities. | ||||
| Rf3Pwe3IdlePatternProfileEntry | 1.3.6.1.4.1.2544.1.12.19.1.1.1 | NA | ||
row · not-accessible · current An entry containing information applicable to a particular PWE3 Idle Pattern Profile Entity. These profiles are used by PWE3 SAToP entities. | ||||
| Cf3Pwe3IdlePatternProfileIndex | 1.3.6.1.4.1.2544.1.12.19.1.1.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current Unique index value associated with the PWE3 Idle Pattern Profile. | ||||
| Cf3Pwe3IdlePatternProfileByte | 1.3.6.1.4.1.2544.1.12.19.1.1.1.2 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current This object allows SNMP management entities to specify the Idle Pattern Profile information. | ||||
| Tf3Pwe3ResyncProfileTable | 1.3.6.1.4.1.2544.1.12.19.1.2 | NA | ||
table · not-accessible · current A list of entries corresponding to the PWE3 Resync Profile entities. | ||||
| Rf3Pwe3ResyncProfileEntry | 1.3.6.1.4.1.2544.1.12.19.1.2.1 | NA | ||
row · not-accessible · current An entry containing information applicable to a particular PWE3 Resync Profile Entity. These profiles are used by PWE3 SAToP entities. | ||||
| Cf3Pwe3ResyncProfileIndex | 1.3.6.1.4.1.2544.1.12.19.1.2.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current Unique index value associated with the PWE3 Resync Profile. | ||||
| Cf3Pwe3ResyncProfileIncreaseFactor | 1.3.6.1.4.1.2544.1.12.19.1.2.1.2 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current This object allows SNMP management entities to specify the PWE3 Resync Profile Increase Factor. This is used to define the fill rate of the leaky bucket algorithm associated with the Resync mechanism. | ||||
| Cf3Pwe3ResyncProfileDecreaseFactor | 1.3.6.1.4.1.2544.1.12.19.1.2.1.3 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current This object allows SNMP management entities to specify the PWE3 Resync Profile Decrease Factor. This is used to define the leak rate for the leaky bucket algorithm associated with the Resync mechanism. | ||||
| Cf3Pwe3ResyncProfileResyncThreshold | 1.3.6.1.4.1.2544.1.12.19.1.2.1.4 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current This object allows SNMP management entities to specify the PWE3 Resync Profile Resync Threshold. This is the threshold value at which point the pseudo-wire connection is deemed out of synchronization state. | ||||
| Tf3Pwe3LoopbackProfileTable | 1.3.6.1.4.1.2544.1.12.19.1.3 | NA | ||
table · not-accessible · current A list of entries corresponding to the PWE3 Loopback Profile entities. | ||||
| Rf3Pwe3LoopbackProfileEntry | 1.3.6.1.4.1.2544.1.12.19.1.3.1 | NA | ||
row · not-accessible · current An entry containing information applicable to a particular PWE3 Loopback Profile Entity. These profiles are used by PWE3 T1/E1 interfaces. | ||||
| Cf3Pwe3LoopbackProfileIndex | 1.3.6.1.4.1.2544.1.12.19.1.3.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current Unique index value associated with the PWE3 Loopback Profile. | ||||
| Cf3Pwe3LoopbackProfileLength | 1.3.6.1.4.1.2544.1.12.19.1.3.1.2 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current This object allows SNMP management entities to specify the PWE3 Loopback Length. | ||||
| Cf3Pwe3LoopbackProfilePattern | 1.3.6.1.4.1.2544.1.12.19.1.3.1.3 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current This object allows SNMP management entities to specify the PWE3 Loopback Pattern. | ||||
| Cf3Pwe3LoopbackProfileRepeatTime | 1.3.6.1.4.1.2544.1.12.19.1.3.1.4 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current This object allows SNMP management entities to specify the PWE3 Loopback Profile Repeat Time (Duration). | ||||
| Cf3Pwe3LoopbackProfileClearLength | 1.3.6.1.4.1.2544.1.12.19.1.3.1.5 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current This object allows SNMP management entities to specify the Loopback PWE3 Clear Length. | ||||
| Cf3Pwe3LoopbackProfileClearPattern | 1.3.6.1.4.1.2544.1.12.19.1.3.1.6 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current This object allows SNMP management entities to specify the PWE3 Loopback Clear Pattern. | ||||
| Tf3Pwe3LossProfileTable | 1.3.6.1.4.1.2544.1.12.19.1.4 | NA | ||
table · not-accessible · current A list of entries corresponding to the PWE3 Loss Profile entities. | ||||
| Rf3Pwe3LossProfileEntry | 1.3.6.1.4.1.2544.1.12.19.1.4.1 | NA | ||
row · not-accessible · current An entry containing information applicable to a particular PWE3 Loss Profile Entity. These profiles are used by PWE3 SAToP entities. | ||||
| Cf3Pwe3LossProfileIndex | 1.3.6.1.4.1.2544.1.12.19.1.4.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current Unique index value associated with the PWE3 Loss Profile. | ||||
| Cf3Pwe3LossProfileLossStateEnterTime | 1.3.6.1.4.1.2544.1.12.19.1.4.1.2 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current This object allows SNMP management entities to specify the holdoff time that will be applied prior to the SAToP instance entering a Loss State. | ||||
| Cf3Pwe3LossProfileLossStateExitTime | 1.3.6.1.4.1.2544.1.12.19.1.4.1.3 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current This object allows SNMP management entities to specify the holdon time that will be applied when the conditon causing the loss state clears. | ||||
| Tf3Pwe3AisStabilizationProfileTable | 1.3.6.1.4.1.2544.1.12.19.1.5 | NA | ||
table · not-accessible · current A list of entries corresponding to the PWE3 AisStabilization Profile entities. | ||||
| Rf3Pwe3AisStabilizationProfileEntry | 1.3.6.1.4.1.2544.1.12.19.1.5.1 | NA | ||
row · not-accessible · current An entry containing information applicable to a particular PWE3 AisStabilization Profile Entity. These profiles are used by PWE3 SAToP entities. | ||||
| Cf3Pwe3AisStabilizationProfileIndex | 1.3.6.1.4.1.2544.1.12.19.1.5.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current Unique index value associated with the PWE3 AIS Stabilization Profile. | ||||
| Cf3Pwe3AisStabilizationProfileEnterTime | 1.3.6.1.4.1.2544.1.12.19.1.5.1.2 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current This object allows SNMP management entities to specify the time (in hundreds of milliseconds) that will be applied on a LOS event, before the SAToP instance transmits all 1s pattern downstream (AIS). Range 0 to 3 seconds in 100 millisecond increments. | ||||
| Cf3Pwe3AisStabilizationProfileExitTime | 1.3.6.1.4.1.2544.1.12.19.1.5.1.3 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current This object allows SNMP management entities to specify the holdon time that will be applied when leaving the AIS Stabilization period. Range 0 to 3 seconds in 100 milliseconds increments (e.g. parameter range is 0 to 30). | ||||
| Tf3Pwe3SatopTable | 1.3.6.1.4.1.2544.1.12.19.1.6 | NA | ||
table · not-accessible · current A list of entries corresponding to the PWE3 SAToP entities. | ||||
| Rf3Pwe3SatopEntry | 1.3.6.1.4.1.2544.1.12.19.1.6.1 | NA | ||
row · not-accessible · current An entry containing information applicable to a particular PWE3 SAToP Entity.
| ||||
| Cf3Pwe3SatopIndex | 1.3.6.1.4.1.2544.1.12.19.1.6.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current Unique index value associated with the SAToP Entity. | ||||
| Cf3Pwe3SatopAlias | 1.3.6.1.4.1.2544.1.12.19.1.6.1.2 | DisplayString (SIZE (0..256)) | RC | |
column · DisplayString (SIZE (0..256)) · read-create · current This object allows SNMP management entities to provide an alias to the PWE3 SAToP entity. | ||||
| Cf3Pwe3SatopAdminState | 1.3.6.1.4.1.2544.1.12.19.1.6.1.3 | AdminState | RW | |
column · AdminState · read-write · current This object represents the Administrative State of the PWE3 SAToP entity. | ||||
| Cf3Pwe3SatopOperationalState | 1.3.6.1.4.1.2544.1.12.19.1.6.1.4 | OperationalState | RO | |
column · OperationalState · read-only · current This object represents the Operational State of the PWE3 SAToP entity. | ||||
| Cf3Pwe3SatopSecondaryState | 1.3.6.1.4.1.2544.1.12.19.1.6.1.5 | SecondaryState | RO | |
column · SecondaryState · read-only · current This object represents the Secondary State of the PWE3 SAToP entity. | ||||
| Cf3Pwe3SatopTDMEntity | 1.3.6.1.4.1.2544.1.12.19.1.6.1.6 | VariablePointer | RC | |
column · VariablePointer · read-create · current This object allows specification of the T1/E1 entity associated with the SAToP. This is only used at SATop creation time. Result of get operation on this object will result with zeroDotZero since one Satop could have more then one associated TDM entity. Subsequently, the associated TDM entities are managed via f3Pwe3SatopTDMEntityTable. | ||||
| Cf3Pwe3SatopDiscoveryType | 1.3.6.1.4.1.2544.1.12.19.1.6.1.7 | PWE3SatopDiscoveryType | RC | |
column · PWE3SatopDiscoveryType · read-create · current This object allows ability to statically/dynamically determine the MAC address of the remote IP Address associated with the SAToP. In the case of static discovery type, f3Pwe3SatopRemoteMacAddress must be explicitly specified. In the case of dynamic discovery, the system will use ARP mechanism to obtain the remote Layer 2 MAC address. | ||||
| Cf3Pwe3SatopRemoteIpAddress | 1.3.6.1.4.1.2544.1.12.19.1.6.1.8 | IpAddress | RC | |
column · IpAddress · read-create · current This object allows ability to specify the remote IP Address. This is used in the PWE payload. | ||||
| Cf3Pwe3SatopRemoteMacAddress | 1.3.6.1.4.1.2544.1.12.19.1.6.1.9 | MacAddress | RC | |
column · MacAddress · read-create · current This object allows ability to specify the remote Layer 2 MAC Address. This must be specified in case of f3Pwe3SatopDiscoveryType as static. This is derived dynamically (via ARP) if f3Pwe3SatopDiscoveryType is dynamic, i.e. it does not have to be specified. | ||||
| Cf3Pwe3SatopEncapsulationType | 1.3.6.1.4.1.2544.1.12.19.1.6.1.10 | PWE3SatopEncapsulationType | RC | |
column · PWE3SatopEncapsulationType · read-create · current This object allows ability to specify the encapsulation type of the SATop. It can be encapsulated with VLAN and single MPLS label(vlan-one-mpls-label), VLAN and two MPLS labels (vlan-two-mpls-label), untagged and two MPLS labels (novlan-two-mpls-label) . | ||||
| Cf3Pwe3SatopRTPEnabled | 1.3.6.1.4.1.2544.1.12.19.1.6.1.11 | TruthValue | RC | |
column · TruthValue · read-create · current This object enables/disables RTP header for this SATop instance. | ||||
| Cf3Pwe3SatopRTPUpdateFrequency | 1.3.6.1.4.1.2544.1.12.19.1.6.1.12 | PWE3SatopRTPTSUpdateFreqType | RC | |
column · PWE3SatopRTPTSUpdateFreqType · read-create · current When f3Pwe3SatopRTPEnabled is true, this object allows specification of the RTP clock update frequency. | ||||
| Cf3Pwe3SatopControlWordEnabled | 1.3.6.1.4.1.2544.1.12.19.1.6.1.13 | TruthValue | RC | |
column · TruthValue · read-create · current This object is used for 3rd party interoperability, since earlier versions of PWE do not support control-word. | ||||
| Cf3Pwe3SatopJitterBufferSize | 1.3.6.1.4.1.2544.1.12.19.1.6.1.14 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current This object allows definition of size of the jitter buffer in microseconds for this SATop instance. | ||||
| Cf3Pwe3SatopPayloadSize | 1.3.6.1.4.1.2544.1.12.19.1.6.1.15 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current This object allows specification of the SATop payload size. | ||||
| Cf3Pwe3SatopVlanId | 1.3.6.1.4.1.2544.1.12.19.1.6.1.16 | VlanId | RC | |
column · VlanId · read-create · current This object allows specification of the SATop VLAN Id. Applicable for vlan based encapsulation types. | ||||
| Cf3Pwe3SatopVlanPriority | 1.3.6.1.4.1.2544.1.12.19.1.6.1.17 | VlanPriority | RC | |
column · VlanPriority · read-create · current This object allows specification of the SATop VLAN Priority. Applicable for vlan based encapsulation types. | ||||
| Cf3Pwe3SatopRxMplsLabel1 | 1.3.6.1.4.1.2544.1.12.19.1.6.1.18 | MplsLabel | RC | |
column · MplsLabel · read-create · current This object allows specification of the expected receive MPLS Label. Applicable for single MPLS label encapsulation type. | ||||
| Cf3Pwe3SatopRxMplsLabel2 | 1.3.6.1.4.1.2544.1.12.19.1.6.1.19 | MplsLabel | RC | |
column · MplsLabel · read-create · current This object allows specification of the expected receive MPLS Label. Applicable for dual MPLS label encapsulation types. | ||||
| Cf3Pwe3SatopTxMplsLabel1 | 1.3.6.1.4.1.2544.1.12.19.1.6.1.20 | MplsLabel | RC | |
column · MplsLabel · read-create · current This object allows specification of the transmitted MPLS Label, used for multiplexing. Applicable for single MPLS label encapsulation type. | ||||
| Cf3Pwe3SatopTxMplsLabel2 | 1.3.6.1.4.1.2544.1.12.19.1.6.1.21 | MplsLabel | RC | |
column · MplsLabel · read-create · current This object allows specification of the transmitted MPLS Label, used for multiplexing. Applicable for dual MPLS label encapsulation type. | ||||
| Cf3Pwe3SatopAisStabilizationProfile | 1.3.6.1.4.1.2544.1.12.19.1.6.1.22 | VariablePointer | RC | |
column · VariablePointer · read-create · current This object allows specification of the AIS stabilization Profile object. If no profile is associated, this value should be 0.0. | ||||
| Cf3Pwe3SatopResyncProfile | 1.3.6.1.4.1.2544.1.12.19.1.6.1.23 | VariablePointer | RC | |
column · VariablePointer · read-create · current This object allows specification of the Resync Profile object. If no profile is associated, this value should be 0.0. | ||||
| Cf3Pwe3SatopLossProfile | 1.3.6.1.4.1.2544.1.12.19.1.6.1.24 | VariablePointer | RC | |
column · VariablePointer · read-create · current This object allows specification of the Loss Profile object. If no profile is associated, this value should be 0.0. | ||||
| Cf3Pwe3SatopTransportMode | 1.3.6.1.4.1.2544.1.12.19.1.6.1.25 | PWE3SatopTransportMode | RC | |
column · PWE3SatopTransportMode · read-create · current This object allows specification of the SATop transport mode. | ||||
| Cf3Pwe3SatopStorageType | 1.3.6.1.4.1.2544.1.12.19.1.6.1.26 | StorageType | RC | |
column · StorageType · read-create · current The type of storage configured for this entry. | ||||
| Cf3Pwe3SatopRowStatus | 1.3.6.1.4.1.2544.1.12.19.1.6.1.27 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3Pwe3SatopRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3Pwe3SatopRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3Pwe3SatopRowStatus object may be modified if the associated instance of this object is equal to active(1). | ||||
| Tf3Pwe3SatopTDMEntitiesTable | 1.3.6.1.4.1.2544.1.12.19.1.7 | NA | ||
table · not-accessible · current A list of entries corresponding to the PWE3 SATop TDM entities . | ||||
| Rf3Pwe3SatopTDMEntitiesEntry | 1.3.6.1.4.1.2544.1.12.19.1.7.1 | NA | ||
row · not-accessible · current An entry containing information applicable to a particular PWE3 SATop TDM entity. | ||||
| Cf3Pwe3SatopTDMEntityIndex | 1.3.6.1.4.1.2544.1.12.19.1.7.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current Unique index value associated with the PWE3 SATOP TDM Entity. | ||||
| Cf3Pwe3SatopTDMEntityObject | 1.3.6.1.4.1.2544.1.12.19.1.7.1.2 | VariablePointer | RW | |
column · VariablePointer · read-write · current This object points to the PWE3 SATOP TDM Entity. This is OID of the actual T1/E1 interface. | ||||
| Cf3Pwe3SatopTDMEntityStorageType | 1.3.6.1.4.1.2544.1.12.19.1.7.1.3 | StorageType | RC | |
column · StorageType · read-create · current The type of storage configured for this entry. | ||||
| Cf3Pwe3SatopTDMEntityRowStatus | 1.3.6.1.4.1.2544.1.12.19.1.7.1.4 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3Pwe3SatopTDMEntityRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with f3Pwe3SatopTDMEntityRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3Pwe3SatopTDMEntityRowStatus object may be modified if the associated instance of this object is equal to active(1). | ||||
| Nf3Pwe3PerformanceObjects | 1.3.6.1.4.1.2544.1.12.19.2 | |||
| Tf3Pwe3SatopStatsTable | 1.3.6.1.4.1.2544.1.12.19.2.1 | NA | ||
table · not-accessible · current The PWE3 SATop Current data. | ||||
| Rf3Pwe3SatopStatsEntry | 1.3.6.1.4.1.2544.1.12.19.2.1.1 | NA | ||
row · not-accessible · current A conceptual row in the f3Pwe3SatopStatsTable. | ||||
| Cf3Pwe3SatopStatsIndex | 1.3.6.1.4.1.2544.1.12.19.2.1.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current An index of the SATop current bin. | ||||
| Cf3Pwe3SatopStatsIntervalType | 1.3.6.1.4.1.2544.1.12.19.2.1.1.2 | CmPmIntervalType | RO | |
column · CmPmIntervalType · read-only · current Indicates the type of collection, i.e. whether it is 15 Min, 1 Day. | ||||
| Cf3Pwe3SatopStatsValid | 1.3.6.1.4.1.2544.1.12.19.2.1.1.3 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates the validity of the bin. | ||||
| Cf3Pwe3SatopStatsAction | 1.3.6.1.4.1.2544.1.12.19.2.1.1.4 | CmPmBinAction | RW | |
column · CmPmBinAction · read-write · current Allows the Manager to clear the bin. | ||||
| Cf3Pwe3SatopStatsESs | 1.3.6.1.4.1.2544.1.12.19.2.1.1.5 | PerfCounter64 | RO | |
column · PerfCounter64 · read-only · current The counter associated with the number of Errored Seconds encountered by the SATop in the current bin. | ||||
| Cf3Pwe3SatopStatsSESs | 1.3.6.1.4.1.2544.1.12.19.2.1.1.6 | PerfCounter64 | RO | |
column · PerfCounter64 · read-only · current The counter associated with the number of Severely Errored Seconds encountered by the SATop in the current bin. | ||||
| Cf3Pwe3SatopStatsEBs | 1.3.6.1.4.1.2544.1.12.19.2.1.1.7 | PerfCounter64 | RO | |
column · PerfCounter64 · read-only · current The counter associated with the number of Errored Blocsk encountered by the SATop in the current bin. | ||||
| Cf3Pwe3SatopStatsResyncs | 1.3.6.1.4.1.2544.1.12.19.2.1.1.8 | PerfCounter64 | RO | |
column · PerfCounter64 · read-only · current The counter associated with the number of Resync count events encountered by the SATop in the current bin. | ||||
| Cf3Pwe3SatopStatsMaxJitter | 1.3.6.1.4.1.2544.1.12.19.2.1.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The maximum absolute jitter on SATop in the current bin. | ||||
| Cf3Pwe3SatopStatsFramesTx | 1.3.6.1.4.1.2544.1.12.19.2.1.1.10 | PerfCounter64 | RO | |
column · PerfCounter64 · read-only · current The counter associated with the number of Frames Transmitted in the current bin. | ||||
| Cf3Pwe3SatopStatsPayloadOctetsTx | 1.3.6.1.4.1.2544.1.12.19.2.1.1.11 | PerfCounter64 | RO | |
column · PerfCounter64 · read-only · current The counter associated with the number of Payload Octets Transmitted in the current bin. | ||||
| Cf3Pwe3SatopStatsFramesRx | 1.3.6.1.4.1.2544.1.12.19.2.1.1.12 | PerfCounter64 | RO | |
column · PerfCounter64 · read-only · current The counter associated with the number of Frames Received in the current bin. | ||||
| Cf3Pwe3SatopStatsPayloadOctetsRx | 1.3.6.1.4.1.2544.1.12.19.2.1.1.13 | PerfCounter64 | RO | |
column · PerfCounter64 · read-only · current The counter associated with the number of Payload Octets Received in the current bin. | ||||
| Cf3Pwe3SatopStatsOutOfSeqFramesRx | 1.3.6.1.4.1.2544.1.12.19.2.1.1.14 | PerfCounter64 | RO | |
column · PerfCounter64 · read-only · current The counter associated with the number of Out of Sequence Frames Received in the current bin. | ||||
| Cf3Pwe3SatopStatsLostFrames | 1.3.6.1.4.1.2544.1.12.19.2.1.1.15 | PerfCounter64 | RO | |
column · PerfCounter64 · read-only · current The counter associated with the number of Lost Frames detected in the current bin. | ||||
| Cf3Pwe3SatopStatsLostFramesStateTrans | 1.3.6.1.4.1.2544.1.12.19.2.1.1.16 | PerfCounter64 | RO | |
column · PerfCounter64 · read-only · current The counter associated with the number of transitions to Lost Frame State detected in the current bin. | ||||
| Cf3Pwe3SatopStatsMalformedFramesRx | 1.3.6.1.4.1.2544.1.12.19.2.1.1.17 | PerfCounter64 | RO | |
column · PerfCounter64 · read-only · current The counter associated with the number of Malformed Frames received in the current bin. | ||||
| Cf3Pwe3SatopStatsJitterBufferLateFrames | 1.3.6.1.4.1.2544.1.12.19.2.1.1.18 | PerfCounter64 | RO | |
column · PerfCounter64 · read-only · current The counter associated with the number of Jitter Buffer Late Frames in the current bin. | ||||
| Tf3Pwe3SatopHistoryTable | 1.3.6.1.4.1.2544.1.12.19.2.2 | NA | ||
table · not-accessible · current The PWE3 SATop History data. | ||||
| Rf3Pwe3SatopHistoryEntry | 1.3.6.1.4.1.2544.1.12.19.2.2.1 | NA | ||
row · not-accessible · current A conceptual row in the f3Pwe3SatopHistoryTable. | ||||
| Cf3Pwe3SatopHistoryIndex | 1.3.6.1.4.1.2544.1.12.19.2.2.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current An index of the SATop current bin. | ||||
| Cf3Pwe3SatopHistoryTime | 1.3.6.1.4.1.2544.1.12.19.2.2.1.2 | DateAndTime | RO | |
column · DateAndTime · read-only · current Indicates the time of history bin creation. | ||||
| Cf3Pwe3SatopHistoryValid | 1.3.6.1.4.1.2544.1.12.19.2.2.1.3 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates the validity of the bin. | ||||
| Cf3Pwe3SatopHistoryAction | 1.3.6.1.4.1.2544.1.12.19.2.2.1.4 | CmPmBinAction | RW | |
column · CmPmBinAction · read-write · current Allows the Manager to clear the bin. | ||||
| Cf3Pwe3SatopHistoryESs | 1.3.6.1.4.1.2544.1.12.19.2.2.1.5 | PerfCounter64 | RO | |
column · PerfCounter64 · read-only · current The counter associated with the number of Errored Seconds encountered by the SATop in the current bin. | ||||
| Cf3Pwe3SatopHistorySESs | 1.3.6.1.4.1.2544.1.12.19.2.2.1.6 | PerfCounter64 | RO | |
column · PerfCounter64 · read-only · current The counter associated with the number of Severely Errored Seconds encountered by the SATop in the current bin. | ||||
| Cf3Pwe3SatopHistoryEBs | 1.3.6.1.4.1.2544.1.12.19.2.2.1.7 | PerfCounter64 | RO | |
column · PerfCounter64 · read-only · current The counter associated with the number of Errored Blocsk encountered by the SATop in the current bin. | ||||
| Cf3Pwe3SatopHistoryResyncs | 1.3.6.1.4.1.2544.1.12.19.2.2.1.8 | PerfCounter64 | RO | |
column · PerfCounter64 · read-only · current The counter associated with the number of Resync count events encountered by the SATop in the current bin. | ||||
| Cf3Pwe3SatopHistoryMaxJitter | 1.3.6.1.4.1.2544.1.12.19.2.2.1.9 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current The maximum absolute jitter on SATop in the current bin. | ||||
| Cf3Pwe3SatopHistoryFramesTx | 1.3.6.1.4.1.2544.1.12.19.2.2.1.10 | PerfCounter64 | RO | |
column · PerfCounter64 · read-only · current The counter associated with the number of Frames Transmitted in the current bin. | ||||
| Cf3Pwe3SatopHistoryPayloadOctetsTx | 1.3.6.1.4.1.2544.1.12.19.2.2.1.11 | PerfCounter64 | RO | |
column · PerfCounter64 · read-only · current The counter associated with the number of Payload Octets Transmitted in the current bin. | ||||
| Cf3Pwe3SatopHistoryFramesRx | 1.3.6.1.4.1.2544.1.12.19.2.2.1.12 | PerfCounter64 | RO | |
column · PerfCounter64 · read-only · current The counter associated with the number of Frames Received in the current bin. | ||||
| Cf3Pwe3SatopHistoryPayloadOctetsRx | 1.3.6.1.4.1.2544.1.12.19.2.2.1.13 | PerfCounter64 | RO | |
column · PerfCounter64 · read-only · current The counter associated with the number of Payload Octets Received in the current bin. | ||||
| Cf3Pwe3SatopHistoryOutOfSeqFramesRx | 1.3.6.1.4.1.2544.1.12.19.2.2.1.14 | PerfCounter64 | RO | |
column · PerfCounter64 · read-only · current The counter associated with the number of Out of Sequence Frames Received in the current bin. | ||||
| Cf3Pwe3SatopHistoryLostFrames | 1.3.6.1.4.1.2544.1.12.19.2.2.1.15 | PerfCounter64 | RO | |
column · PerfCounter64 · read-only · current The counter associated with the number of Lost Frames detected in the current bin. | ||||
| Cf3Pwe3SatopHistoryLostFramesStateTrans | 1.3.6.1.4.1.2544.1.12.19.2.2.1.16 | PerfCounter64 | RO | |
column · PerfCounter64 · read-only · current The counter associated with the number of transitions to Lost Frame State detected in the current bin. | ||||
| Cf3Pwe3SatopHistoryMalformedFramesRx | 1.3.6.1.4.1.2544.1.12.19.2.2.1.17 | PerfCounter64 | RO | |
column · PerfCounter64 · read-only · current The counter associated with the number of Malformed Frames received in the current bin. | ||||
| Cf3Pwe3SatopHistoryJitterBufferLateFrames | 1.3.6.1.4.1.2544.1.12.19.2.2.1.18 | PerfCounter64 | RO | |
column · PerfCounter64 · read-only · current The counter associated with the number of Jitter Buffer Overruns in the current bin. | ||||
| Tf3Pwe3SatopThresholdTable | 1.3.6.1.4.1.2544.1.12.19.2.3 | NA | ||
table · not-accessible · current A table of entries that allow manageability of SATop Thresholds. | ||||
| Rf3Pwe3SatopThresholdEntry | 1.3.6.1.4.1.2544.1.12.19.2.3.1 | NA | ||
row · not-accessible · current A conceptual row in the f3Pwe3SatopThresholdTable. | ||||
| Cf3Pwe3SatopThresholdIndex | 1.3.6.1.4.1.2544.1.12.19.2.3.1.1 | Integer32 (1..65535) | NA | |
column · Integer32 (1..65535) · not-accessible · current An index that uniquely identifies an entry in the f3Pwe3SatopThresholdTable. | ||||
| Cf3Pwe3SatopThresholdInterval | 1.3.6.1.4.1.2544.1.12.19.2.3.1.2 | CmPmIntervalType | RO | |
column · CmPmIntervalType · read-only · current The interval over which monitored value is sampled and compared with the specified threshold. | ||||
| Cf3Pwe3SatopThresholdVariable | 1.3.6.1.4.1.2544.1.12.19.2.3.1.3 | VariablePointer | RO | |
column · VariablePointer · read-only · current The object identifier of the particular variable to be sampled. | ||||
| Cf3Pwe3SatopThresholdValueLo | 1.3.6.1.4.1.2544.1.12.19.2.3.1.4 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Lower 32 bits of the threshold value. | ||||
| Cf3Pwe3SatopThresholdValueHi | 1.3.6.1.4.1.2544.1.12.19.2.3.1.5 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current Higher 32 bits of the threshold value. | ||||
| Cf3Pwe3SatopThresholdMonValue | 1.3.6.1.4.1.2544.1.12.19.2.3.1.6 | Counter64 | RO | |
column · Counter64 · read-only · current Monitored value corresponding to f3Pwe3SatopThresholdVariable. | ||||
| Nf3Pwe3PerformanceNotifications | 1.3.6.1.4.1.2544.1.12.19.3 | |||
| !f3Pwe3SatopThresholdCrossingAlert | 1.3.6.1.4.1.2544.1.12.19.3.1 | |||
notification · current This trap is sent each time a threshold on a PM condition on an PWE3 SATop is crossed. | ||||
| Nf3Pwe3Conformance | 1.3.6.1.4.1.2544.1.12.19.4 | |||
| Nf3Pwe3Compliances | 1.3.6.1.4.1.2544.1.12.19.4.1 | |||
| Mf3Pwe3Compliance | 1.3.6.1.4.1.2544.1.12.19.4.1.1 | |||
compliance · current Describes the requirements for conformance to the F3 PWE3 group. | ||||
| Nf3Pwe3Groups | 1.3.6.1.4.1.2544.1.12.19.4.2 | |||
| Gf3Pwe3ObjectGroup | 1.3.6.1.4.1.2544.1.12.19.4.2.1 | |||
group · current A collection of objects used to manage the F3 PWE3 Configuration data.
| ||||
| Gf3Pwe3PerfObjectGroup | 1.3.6.1.4.1.2544.1.12.19.4.2.2 | |||
group · current A collection of objects used to manage the F3 PWE3 Performance data.
| ||||
| Gf3Pwe3PerfNotifGroup | 1.3.6.1.4.1.2544.1.12.19.4.2.3 | |||
group · current A collection of notifications related to F3 PWE3 Threshold Crossing Alerts. | ||||
Textual conventions
MplsLabelUnsigned32Definition of MPLS Label. The bits in network order (left-to-right) are, Label(20-bits):QOS(3-bits):Bottom-of-Stack(1-bit):TTL(8-bits) These constitute the 32-bit unsigned integer.
PWE3SatopDiscoveryTypeINTEGERdynamic(1)static(2)Enumerations for PWE3 SATop Discovery Type.
PWE3SatopEncapsulationTypeINTEGERnovlan-two-mpls-label(3)vlan-one-mpls-label(1)vlan-two-mpls-label(2)Enumerations for PWE3 SATop Encapsulation Type.
PWE3SatopRTPTSUpdateFreqTypeINTEGERfreq-1024kHz(8)freq-128kHz(5)freq-16kHz(2)freq-256kHz(6)freq-32kHz(3)freq-512kHz(7)freq-64kHz(4)freq-8kHz(1)Enumerations for PWE3 SATop RTP Update Frequency.
PWE3SatopTransportModeINTEGERsatop-e1(1)satop-octetalignt1(3)satop-t1(2)Enumerations for PWE3 SATop Transport Mode.
Traps / Notifications
- f3Pwe3SatopThresholdCrossingAlert
1.3.6.1.4.1.2544.1.12.19.3.1