F3-JDSU-MIB
ADVA AG Optical NetworkingThis module defines the JDSU MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
snmptranslate -m F3-JDSU-MIB -Tpsnmpwalk -v2c -c <community> -m F3-JDSU-MIB <host> 1.3.6.1.4.1.2544.1.12.31Imports
| ADVA-MIB | fsp150cm |
|---|---|
| CM-COMMON-MIB | AdminState, OperationalState, SecondaryState, VlanId, VlanPriority |
| CM-ENTITY-MIB | neIndex, shelfIndex, slotIndex |
| CM-FACILITY-MIB | cmEthernetTrafficPortEntry, cmEthernetTrafficPortIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DateAndTime, DisplayString, MacAddress, PhysAddress, RowStatus, StorageType, TEXTUAL-CONVENTION, TruthValue, VariablePointer |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| If3JdsuMIB | 1.3.6.1.4.1.2544.1.12.31 | |||
identity This module defines the JDSU MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking. | ||||
| Nf3JdsuObjects | 1.3.6.1.4.1.2544.1.12.31.1 | |||
| Sf3JdsuGeneratorPort | 1.3.6.1.4.1.2544.1.12.31.1.1 | VariablePointer | RW | |
scalar · VariablePointer · read-write · current This object describes the port which will raise a JDSU discovery. | ||||
| Sf3JdsuGeneratorOuterVlanEnabled | 1.3.6.1.4.1.2544.1.12.31.1.2 | TruthValue | RW | |
scalar · TruthValue · read-write · current This object describes whether the filter's Outer Vlan enabled. | ||||
| Sf3JdsuGeneratorOuterVlanId | 1.3.6.1.4.1.2544.1.12.31.1.3 | VlanId | RW | |
scalar · VlanId · read-write · current This object describes the filter's Outer VlanId. | ||||
| Sf3JdsuGeneratorOuterVlanPri | 1.3.6.1.4.1.2544.1.12.31.1.4 | VlanPriority | RW | |
scalar · VlanPriority · read-write · current This object describes the filter's Outer Vlan Priority. | ||||
| Sf3JdsuGeneratorOuterVlanEtherType | 1.3.6.1.4.1.2544.1.12.31.1.5 | Unsigned32 | RW | |
scalar · Unsigned32 · read-write · current This object describes the filter's Outer Vlan Ether Type. | ||||
| Sf3JdsuGeneratorInnerVlan1Enabled | 1.3.6.1.4.1.2544.1.12.31.1.6 | TruthValue | RW | |
scalar · TruthValue · read-write · current This object describes whether the filter's Inner Vlan1 enabled. | ||||
| Sf3JdsuGeneratorInnerVlan1Id | 1.3.6.1.4.1.2544.1.12.31.1.7 | VlanId | RW | |
scalar · VlanId · read-write · current This object describes the filter's Inner Vlan1 ID. | ||||
| Sf3JdsuGeneratorInnerVlan1Pri | 1.3.6.1.4.1.2544.1.12.31.1.8 | VlanPriority | RW | |
scalar · VlanPriority · read-write · current This object describes the filter's Inner Vlan1 Priority. | ||||
| Sf3JdsuGeneratorInnerVlan1EtherType | 1.3.6.1.4.1.2544.1.12.31.1.9 | Unsigned32 | RW | |
scalar · Unsigned32 · read-write · current This object describes the filter's Inner Vlan1 Ether Type. | ||||
| Sf3JdsuGeneratorInnerVlan2Enabled | 1.3.6.1.4.1.2544.1.12.31.1.10 | TruthValue | RW | |
scalar · TruthValue · read-write · current This object describes whether the filter's Inner Vlan2 enabled. | ||||
| Sf3JdsuGeneratorInnerVlan2Id | 1.3.6.1.4.1.2544.1.12.31.1.11 | VlanId | RW | |
scalar · VlanId · read-write · current This object describes the filter's Inner Vlan2 ID. | ||||
| Sf3JdsuGeneratorInnerVlan2Pri | 1.3.6.1.4.1.2544.1.12.31.1.12 | VlanPriority | RW | |
scalar · VlanPriority · read-write · current This object describes the filter's Inner Vlan2 Priority. | ||||
| Sf3JdsuGeneratorInnerVlan2EtherType | 1.3.6.1.4.1.2544.1.12.31.1.13 | Unsigned32 | RW | |
scalar · Unsigned32 · read-write · current This object describes the filter's Inner Vlan2 Ether Type. | ||||
| Sf3JdsuGeneratorFrameType | 1.3.6.1.4.1.2544.1.12.31.1.14 | JdsuGeneratorFrameType | RW | |
scalar · JdsuGeneratorFrameType · read-write · current This object describe the filter's frame type. Its default value is 802.3. | ||||
| Sf3JdsuGeneratorPayloadType | 1.3.6.1.4.1.2544.1.12.31.1.15 | JdsuGeneratorPayloadType | RW | |
scalar · JdsuGeneratorPayloadType · read-write · current Indicates the type of payload the remaining test frame shall contain, either fixed (incremental bytes or repeated bytes) or random (according to IEEE short continuous random test pattern). Default is random. This payload starts after the Ethernet frame header (including all VLAN tags). | ||||
| Sf3JdsuGeneratorFrameLength | 1.3.6.1.4.1.2544.1.12.31.1.16 | Integer32 | RW | |
scalar · Integer32 · read-write · current Indicates the length of the frame which shall be injected, The size range for all ports is from 64 to 9600. | ||||
| Sf3JdsuGeneratorDiscoveryAction | 1.3.6.1.4.1.2544.1.12.31.1.17 | DiscoveryAction | RW | |
scalar · DiscoveryAction · read-write · current Indicates the discovery action on the JDSU generator. | ||||
| Tf3JdsuGeneratorDiscoverTable | 1.3.6.1.4.1.2544.1.12.31.1.18 | NA | ||
table · not-accessible · current A list of entries corresponding to JDSU Generator Discover Information. | ||||
| Rf3JdsuGeneratorDiscoverEntry | 1.3.6.1.4.1.2544.1.12.31.1.18.1 | NA | ||
row · not-accessible · current A conceptual row in the f3JdsuGeneratorDiscoverTable. | ||||
| Cf3JdsuGeneratorDiscoverDestMacAddr | 1.3.6.1.4.1.2544.1.12.31.1.18.1.1 | MacAddress | NA | |
column · MacAddress · not-accessible · current This object describes the destination MAC address for the test frames. | ||||
| Cf3JdsuGeneratorDiscoverOuterVlanEnabled | 1.3.6.1.4.1.2544.1.12.31.1.18.1.2 | TruthValue | RO | |
column · TruthValue · read-only · current This object describes whether the filter's Outer Vlan enabled. | ||||
| Cf3JdsuGeneratorDiscoverOuterVlanId | 1.3.6.1.4.1.2544.1.12.31.1.18.1.3 | VlanId | RO | |
column · VlanId · read-only · current This object describes the filter's Outer Vlan ID. | ||||
| Cf3JdsuGeneratorDiscoverOuterVlanPri | 1.3.6.1.4.1.2544.1.12.31.1.18.1.4 | VlanPriority | RO | |
column · VlanPriority · read-only · current This object describes the filter's Outer Vlan Priority. | ||||
| Cf3JdsuGeneratorDiscoverOuterVlanEtherType | 1.3.6.1.4.1.2544.1.12.31.1.18.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current This object describe the filter's Outer Vlan Ether Type. | ||||
| Cf3JdsuGeneratorDiscoverInnerVlan1Enabled | 1.3.6.1.4.1.2544.1.12.31.1.18.1.6 | TruthValue | RO | |
column · TruthValue · read-only · current This object describes whether the filter's Inner Vlan1 enabled. | ||||
| Cf3JdsuGeneratorDiscoverInnerVlan1Id | 1.3.6.1.4.1.2544.1.12.31.1.18.1.7 | VlanId | RO | |
column · VlanId · read-only · current This object describe the filter's Inner Vlan1 ID. | ||||
| Cf3JdsuGeneratorDiscoverInnerVlan1Pri | 1.3.6.1.4.1.2544.1.12.31.1.18.1.8 | VlanPriority | RO | |
column · VlanPriority · read-only · current This object describes the filter's Inner Vlan1 Priority. | ||||
| Cf3JdsuGeneratorDiscoverInnerVlan1EtherType | 1.3.6.1.4.1.2544.1.12.31.1.18.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current This object describes the filter's Inner Vlan1 Ether Type. | ||||
| Cf3JdsuGeneratorDiscoverInnerVlan2Enabled | 1.3.6.1.4.1.2544.1.12.31.1.18.1.10 | TruthValue | RO | |
column · TruthValue · read-only · current This object describes whether the filter's Inner Vlan2 enabled. | ||||
| Cf3JdsuGeneratorDiscoverInnerVlan2Id | 1.3.6.1.4.1.2544.1.12.31.1.18.1.11 | VlanId | RO | |
column · VlanId · read-only · current This object describes the filter's Inner Vlan2 ID. | ||||
| Cf3JdsuGeneratorDiscoverInnerVlan2Pri | 1.3.6.1.4.1.2544.1.12.31.1.18.1.12 | VlanPriority | RO | |
column · VlanPriority · read-only · current This object describes the filter's Inner Vlan2 Priority. | ||||
| Cf3JdsuGeneratorDiscoverInnerVlan2EtherType | 1.3.6.1.4.1.2544.1.12.31.1.18.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current This object describes the filter's Inner Vlan2 Ether Type. | ||||
| Cf3JdsuGeneratorDiscoverFrameType | 1.3.6.1.4.1.2544.1.12.31.1.18.1.14 | JdsuGeneratorFrameType | RO | |
column · JdsuGeneratorFrameType · read-only · current This object describes the filter's frame type. Its default value is 802.3. | ||||
| Cf3JdsuGeneratorDiscoverPayloadType | 1.3.6.1.4.1.2544.1.12.31.1.18.1.15 | JdsuGeneratorPayloadType | RO | |
column · JdsuGeneratorPayloadType · read-only · current Indicates the type of payload the remaining test frame shall contain, either fixed (incremental bytes or repeated bytes) or random (according to IEEE short continuous random test pattern). Default is random. This payload starts after the Ethernet frame header (including all VLAN tags). | ||||
| Cf3JdsuGeneratorDiscoverFrameLength | 1.3.6.1.4.1.2544.1.12.31.1.18.1.16 | Integer32 | RW | |
column · Integer32 · read-write · current Indicates the length of the frame which shall be injected, The size range for all ports is from 64 to 9600. | ||||
| Cf3JdsuGeneratorDiscoverUnitTextId | 1.3.6.1.4.1.2544.1.12.31.1.18.1.17 | DisplayString | RO | |
column · DisplayString · read-only · current Indicates the string from remote device. Normally it is system name of remote device. | ||||
| Cf3JdsuGeneratorDiscoverIfReachable | 1.3.6.1.4.1.2544.1.12.31.1.18.1.18 | TruthValue | RO | |
column · TruthValue · read-only · current Indicate whether the mac can be discovered or not exactly. | ||||
| Cf3JdsuGeneratorDiscoverGeneratorStatus | 1.3.6.1.4.1.2544.1.12.31.1.18.1.19 | GeneratorStatus | RO | |
column · GeneratorStatus · read-only · current Indicates the generator status. | ||||
| Cf3JdsuGeneratorDiscoverItemOperation | 1.3.6.1.4.1.2544.1.12.31.1.18.1.20 | ItemOperation | RW | |
column · ItemOperation · read-write · current action save the discoverd items. | ||||
| Cf3JdsuGeneratorDiscoverItemIfSaved | 1.3.6.1.4.1.2544.1.12.31.1.18.1.21 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates whether the discoverd item saved status. | ||||
| Cf3JdsuGeneratorDiscoverGeneratorAction | 1.3.6.1.4.1.2544.1.12.31.1.18.1.22 | GeneratorAction | RW | |
column · GeneratorAction · read-write · current Indicates looup or lookdown action. | ||||
| Tf3JdsuGeneratorConfigureTable | 1.3.6.1.4.1.2544.1.12.31.1.19 | NA | ||
table · not-accessible · current A list of entries corresponding to JDSU Generator Configure Information. | ||||
| Rf3JdsuGeneratorConfigureEntry | 1.3.6.1.4.1.2544.1.12.31.1.19.1 | NA | ||
row · not-accessible · current A conceptual row in the f3JdsuGeneratorConfigureTable. | ||||
| Cf3JdsuGeneratorConfigureDestMacAddr | 1.3.6.1.4.1.2544.1.12.31.1.19.1.1 | MacAddress | NA | |
column · MacAddress · not-accessible · current This object describes the destination MAC address for the test frames. | ||||
| Cf3JdsuGeneratorConfigureOuterVlanEnabled | 1.3.6.1.4.1.2544.1.12.31.1.19.1.2 | TruthValue | RO | |
column · TruthValue · read-only · current This object describes whether the filter's Outer Vlan enabled. | ||||
| Cf3JdsuGeneratorConfigureOuterVlanId | 1.3.6.1.4.1.2544.1.12.31.1.19.1.3 | VlanId | RO | |
column · VlanId · read-only · current This object describes the filter's Outer Vlan ID. | ||||
| Cf3JdsuGeneratorConfigureOuterVlanPri | 1.3.6.1.4.1.2544.1.12.31.1.19.1.4 | VlanPriority | RO | |
column · VlanPriority · read-only · current This object describes the filter's Outer Vlan Priority. | ||||
| Cf3JdsuGeneratorConfigureOuterVlanEtherType | 1.3.6.1.4.1.2544.1.12.31.1.19.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current This object describes the filter's Outer Vlan Ether Type. | ||||
| Cf3JdsuGeneratorConfigureInnerVlan1Enabled | 1.3.6.1.4.1.2544.1.12.31.1.19.1.6 | TruthValue | RO | |
column · TruthValue · read-only · current This object describes whether the filter's Inner Vlan1 enabled. | ||||
| Cf3JdsuGeneratorConfigureInnerVlan1Id | 1.3.6.1.4.1.2544.1.12.31.1.19.1.7 | VlanId | RO | |
column · VlanId · read-only · current This object describes the filter's Inner Vlan1 ID. | ||||
| Cf3JdsuGeneratorConfigureInnerVlan1Pri | 1.3.6.1.4.1.2544.1.12.31.1.19.1.8 | VlanPriority | RO | |
column · VlanPriority · read-only · current This object describes the filter's Inner Vlan1 Priority. | ||||
| Cf3JdsuGeneratorConfigureInnerVlan1EtherType | 1.3.6.1.4.1.2544.1.12.31.1.19.1.9 | Integer32 | RO | |
column · Integer32 · read-only · current This object describes the filter's Inner Vlan1 Ether Type. | ||||
| Cf3JdsuGeneratorConfigureInnerVlan2Enabled | 1.3.6.1.4.1.2544.1.12.31.1.19.1.10 | TruthValue | RO | |
column · TruthValue · read-only · current This object describes whether the filter's Inner Vlan2 enabled. | ||||
| Cf3JdsuGeneratorConfigureInnerVlan2Id | 1.3.6.1.4.1.2544.1.12.31.1.19.1.11 | VlanId | RO | |
column · VlanId · read-only · current This object describes the filter's Inner Vlan2 ID. | ||||
| Cf3JdsuGeneratorConfigureInnerVlan2Pri | 1.3.6.1.4.1.2544.1.12.31.1.19.1.12 | VlanPriority | RO | |
column · VlanPriority · read-only · current This object describes the filter's Inner Vlan2 Priority. | ||||
| Cf3JdsuGeneratorConfigureInnerVlan2EtherType | 1.3.6.1.4.1.2544.1.12.31.1.19.1.13 | Integer32 | RO | |
column · Integer32 · read-only · current This object describes the filter's Inner Vlan2 Ether Type. | ||||
| Cf3JdsuGeneratorConfigureFrameType | 1.3.6.1.4.1.2544.1.12.31.1.19.1.14 | JdsuGeneratorFrameType | RO | |
column · JdsuGeneratorFrameType · read-only · current This object describes the filter's frame type. Its default value is 802.3. | ||||
| Cf3JdsuGeneratorConfigurePayloadType | 1.3.6.1.4.1.2544.1.12.31.1.19.1.15 | JdsuGeneratorPayloadType | RO | |
column · JdsuGeneratorPayloadType · read-only · current Indicates the type of payload the remaining test frame shall contain, either fixed (incremental bytes or repeated bytes) or random (according to IEEE short continuous random test pattern). Default is random. This payload starts after the Ethernet frame header (including all VLAN tags). | ||||
| Cf3JdsuGeneratorConfigureFrameLength | 1.3.6.1.4.1.2544.1.12.31.1.19.1.16 | Integer32 | RW | |
column · Integer32 · read-write · current Indicates the length of the frame which shall be injected, The size range for all ports is from 64 to 9600. | ||||
| Cf3JdsuGeneratorConfigureUnitTextId | 1.3.6.1.4.1.2544.1.12.31.1.19.1.17 | DisplayString | RO | |
column · DisplayString · read-only · current Indicates the string from remote device. Normally it is system name of remote device. | ||||
| Cf3JdsuGeneratorConfigureIfReachable | 1.3.6.1.4.1.2544.1.12.31.1.19.1.18 | TruthValue | RO | |
column · TruthValue · read-only · current Indicates whether the mac can be Configureed or not exactly. | ||||
| Cf3JdsuGeneratorConfigureReachableUpdate | 1.3.6.1.4.1.2544.1.12.31.1.19.1.19 | UpdateReachStatus | RW | |
column · UpdateReachStatus · read-write · current Action on update the reachable status of the related item. | ||||
| Cf3JdsuGeneratorConfigureStatus | 1.3.6.1.4.1.2544.1.12.31.1.19.1.20 | GeneratorStatus | RO | |
column · GeneratorStatus · read-only · current Indicates the generator status exactly. | ||||
| Cf3JdsuGeneratorConfigureGeneratorAction | 1.3.6.1.4.1.2544.1.12.31.1.19.1.21 | GeneratorAction | RW | |
column · GeneratorAction · read-write · current Indicates JDSU Generator lookup or lookdown action. | ||||
| Cf3JdsuGeneratorConfigureStorageType | 1.3.6.1.4.1.2544.1.12.31.1.19.1.22 | StorageType | RC | |
column · StorageType · read-create · current The type of storage configured for this entry. | ||||
| Cf3JdsuGeneratorConfigureRowStatus | 1.3.6.1.4.1.2544.1.12.31.1.19.1.23 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this row. Note: one row can be deleted by set this item as destoryed. | ||||
| Tf3EthernetTrafficPortJdsuExtTable | 1.3.6.1.4.1.2544.1.12.31.1.20 | NA | ||
table · not-accessible · current A list of entries corresponding to Ethernet Traffic Port Facilities for JDSU configuration purposes. | ||||
| Rf3EthernetTrafficPortJdsuExtEntry | 1.3.6.1.4.1.2544.1.12.31.1.20.1 | NA | ||
row · not-accessible · current A conceptual row in the cmEthernetTrafficPortJdsuExtTable.
| ||||
| Cf3EthernetTrafficPortJdsuLoopbackEnabled | 1.3.6.1.4.1.2544.1.12.31.1.20.1.1 | TruthValue | RW | |
column · TruthValue · read-write · current Enabled: reaction/response to JDSU in-band loopback requests and hallo requests. Disabled: Not reaction/response to JDSU in-band loopback requests and hallo requests. FPGA shall not filter the JDSU control frames to processor. From enabled to disabled, if there is already a JDSU loopback on the port, release current loopback. JDSU loopback doesn't need port in maintenance state. When JDSU Generation Enabled, this attribute can't be enabled. | ||||
| Cf3EthernetTrafficPortJdsuGenerationEanbled | 1.3.6.1.4.1.2544.1.12.31.1.20.1.2 | TruthValue | RW | |
column · TruthValue · read-write · current This object describes whether the user would to raise a JDSU discovery action. When JDSU Loopback Enabled, this attribute cann't be enabled. | ||||
| Cf3EthernetTrafficPortJdsuLoopbackVlanList | 1.3.6.1.4.1.2544.1.12.31.1.20.1.3 | DisplayString | RO | |
column · DisplayString · read-only · current In EG-X, up to 12 loopback can be supported and also up to 2 layer VLAN can be supported.
The format is like 'OuterVid1-OuterPri1;InnerVid1-InnerPri1, OuterVid2-OuterPri2,
OuterVid3-OuterPri3;InnerVid3-InnerPri3'('1-*;2-*, 3-*, 4-*;5-*'). | ||||
| Nf3JdsuNotifications | 1.3.6.1.4.1.2544.1.12.31.2 | |||
| Nf3JdsuConformance | 1.3.6.1.4.1.2544.1.12.31.3 | |||
| Nf3JdsuCompliances | 1.3.6.1.4.1.2544.1.12.31.3.1 | |||
| Mf3JdsuCompliance | 1.3.6.1.4.1.2544.1.12.31.3.1.1 | |||
compliance · current Describes the requirements for conformance to the f3 jdsu group.
| ||||
| Nf3JdsuGroups | 1.3.6.1.4.1.2544.1.12.31.3.2 | |||
| Gf3JdsuGroup | 1.3.6.1.4.1.2544.1.12.31.3.2.1 | |||
group · current A collection of objects used to manage the JDSU functionality.
| ||||
Textual conventions
DiscoveryActionINTEGERdiscover(2)notApplicable(1)The lookup or lookdown action of JDSU generator.
GeneratorActionINTEGERloopDown(3)loopUp(2)notApplicable(1)The lookup or lookdown action of JDSU generator.
GeneratorStatusINTEGERhelloCompleted(4)helloFailed(5)helloIngress(3)initial(2)lookdownCompleted(10)lookdownFailed(11)lookdownIngress(9)lookupCompleted(7)lookupFailed(8)lookupIngress(6)none(1)The exact generator status.
ItemOperationINTEGERnotApplicable(1)save(2)Indicate the save action.
JdsuGeneratorFrameTypeINTEGERframeType8023(2)none(1)The frame type of JDSU generator. frameType8023 means 802.3
JdsuGeneratorPayloadTypeINTEGERfixed(2)none(1)random(3)The frame type of JDSU generator.
UpdateReachStatusINTEGERnotApplicable(1)update(2)Action on update reachable status.