F3-CFM-MIB
ADVA AG Optical NetworkingThis module defines the CFM (8021AG) Extension MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA.
snmptranslate -m F3-CFM-MIB -Tpsnmpwalk -v2c -c <community> -m F3-CFM-MIB <host> 1.3.6.1.4.1.2544.1.12.13Imports
| ADVA-MIB | fsp150cm |
|---|---|
| CM-COMMON-MIB | AdminState, CmPmBinAction, OperationalState, PerfCounter64, SecondaryState, VlanPriority |
| CM-ENTITY-MIB | neIndex, shelfIndex, slotIndex |
| CM-FACILITY-MIB | cmEthernetAccPortIndex, cmEthernetNetPortIndex, cmEthernetTrafficPortIndex |
| IEEE8021-CFM-MIB | Dot1agCfmMDLevel, Dot1agCfmMepId, dot1agCfmMaCompEntry, dot1agCfmMaIndex, dot1agCfmMaNetEntry, dot1agCfmMdIndex, dot1agCfmMepEntry, dot1agCfmMepIdentifier |
| IF-MIB | InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, StorageType, TEXTUAL-CONVENTION, TruthValue, VariablePointer |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| If3CfmMIB | 1.3.6.1.4.1.2544.1.12.13 | |||
identity This module defines the CFM (8021AG) Extension MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA. | ||||
| NcfmExtSvc | 1.3.6.1.4.1.2544.1.12.13.1 | |||
| NcfmExtSvcObjects | 1.3.6.1.4.1.2544.1.12.13.1.1 | |||
| NcfmExtScalars | 1.3.6.1.4.1.2544.1.12.13.1.1.1 | |||
| ScfmEthType | 1.3.6.1.4.1.2544.1.12.13.1.1.1.1 | Integer32 | RO | |
scalar · Integer32 · read-only · current This object provides the system level Ethernet type for CFM. | ||||
| ScfmMacAddress | 1.3.6.1.4.1.2544.1.12.13.1.1.1.2 | MacAddress | RO | |
scalar · MacAddress · read-only · current This object provides the system level Mac address for CFM. | ||||
| SslmMulticastMacAddress | 1.3.6.1.4.1.2544.1.12.13.1.1.1.3 | MacAddress | RW | |
scalar · MacAddress · read-write · current This object can be used to configure the Synthetic Loss Measurement(SLM) Multicast MAC Address. | ||||
| SslmOpcode | 1.3.6.1.4.1.2544.1.12.13.1.1.1.4 | Integer32 (0..255) | RW | |
scalar · Integer32 (0..255) · read-write · current This object can be used to configure the Operation Code for the Synthetic Loss Measurement(SLM) message. | ||||
| SslrOpcode | 1.3.6.1.4.1.2544.1.12.13.1.1.1.5 | Integer32 (0..255) | RW | |
scalar · Integer32 (0..255) · read-write · current This object can be used to configure the Operation Code for the Synthetic Loss Response(SLR) message. | ||||
| ScfmSignalFailTriggers | 1.3.6.1.4.1.2544.1.12.13.1.1.1.6 | CfmSignalFailTriggers | RW | |
scalar · CfmSignalFailTriggers · read-write · current This object can be used to configure the list of defects which constitute Signal Fail condition. | ||||
| TcfmMepTable | 1.3.6.1.4.1.2544.1.12.13.1.1.2 | NA | ||
table · not-accessible · current Additional MEP configuration such as Y.1731 configuration. | ||||
| RcfmMepEntry | 1.3.6.1.4.1.2544.1.12.13.1.1.2.1 | NA | ||
row · not-accessible · current A list of additional MEP parameters such the Y.1731 parameters.
| ||||
| CcfmMepAdminState | 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.1 | AdminState | RW | |
column · AdminState · read-write · current This object represents the Administrative State of the CFM MEPs. | ||||
| CcfmMepAisGenTriggerTypes | 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.2 | CfmAisGenTriggerTypes | RC | |
column · CfmAisGenTriggerTypes · read-create · current A bit mask which indicates all the defects that result in triggering an AIS for the higher level MEP or transmission of ETH-AIS. | ||||
| CcfmMepAisClientMdLevel | 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.3 | Dot1agCfmMDLevel | RC | |
column · Dot1agCfmMDLevel · read-create · current AIS Client MD level which is the MD level used to identify any higher level local MEPs for which AIS defect needs to be set or MD level of the ETH-AIS frame generated if there are no local MEPs at this MD level. | ||||
| CcfmMepAisInterval | 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.4 | CfmAisInterval | RC | |
column · CfmAisInterval · read-create · current ETH-AIS frame transmission interval if decision is made to transmit the ETH-AIS frame. | ||||
| CcfmMepAisGenEnabled | 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.5 | TruthValue | RC | |
column · TruthValue · read-create · current This flag enables/disables propagation of ETH-AIS to client MD levels. | ||||
| CcfmMepAisPriority | 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.6 | VlanPriority | RC | |
column · VlanPriority · read-create · current This VLAN priority of the ETH-AIS frame. | ||||
| CcfmMepLmTxCountAllPriosEnabled | 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.7 | TruthValue | RC | |
column · TruthValue · read-create · current This attribute is used when Y.1731 probes are created and LMM frames are transmitted. As per Y.1731, loss measurement should be done per priority class. The implementation is restricted to support counting of frames for only one priority that can be modified. As an added value there is an option to count all priorities. This flag is used to decide whether to put cumulative data frame counts for all the priorities into the LMM that is transmitted by the MEP instead of data frame counts for a provisioned individual priority. | ||||
| CcfmMepLmRxCountAllPriosEnabled | 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.8 | TruthValue | RC | |
column · TruthValue · read-create · current This attribute is used when Y.1731 probes are created and LMR frames are transmitted. As per Y.1731, loss measurement should be done per priority class. The implementation is restricted to support counting of frames for only one priority that can be modified. As an added value there is an option to count all priorities. This flag is used to decide whether to put cumulative data frame counts for all the priorities into the LMR that is transmitted by the MEP instead of data frame counts for a provisioned individual priority. LMR is sent by a MEP when an LMM is received. | ||||
| CcfmMepLmDualEndedCountAllPriosEnabled | 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.9 | TruthValue | RC | |
column · TruthValue · read-create · current This attribute is used when Y.1731 probes are created and CCM frames are transmitted with loss measurement counts. As per Y.1731, loss measurement should be done per priority class. The implementation is restricted to support counting of frames for only one priority that can be modified. As an added value there is an option to count all priorities. This flag is used to decide whether to put cumulative data frame counts for all the priorities into the CCM instead of data frame counts for a provisioned individual priority. | ||||
| CcfmMepLmCountInProfileEnabled | 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.10 | TruthValue | RC | |
column · TruthValue · read-create · current As per the Y.1731 data frames counted for loss measurement shall be in-profile (green) data frames. As an added value, this flag is provided for the device to count all frames instead of green frames only. This flag could be set to false in cases where the remote device is not color aware and/or capable of color marking. Even if the device is capable of color marking and is color aware if the outer tag is not an S-TAG it makes sense to set this flag to false. As defined in IEEE 802.1ad the S-TAG has the drop eligibility bit that is used to mark the frames green or yellow. | ||||
| CcfmMepLmTxPriority | 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.11 | VlanPriority | RC | |
column · VlanPriority · read-create · current This attribute is used if cfmMepLmTxCountAllPrios is false. This attribute serves three purposes: - It is the VLAN priority of the LMM. - Data frames transmitted and received with this VLAN priority are counted by the MEP. The transmit count is sent in the LMM and the receive count is used to complete the list of four counts used for the loss measurement. - If an LMR is received with a VLAN priority other than this the LMR is dropped. | ||||
| CcfmMepDmPriority | 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.12 | VlanPriority | RC | |
column · VlanPriority · read-create · current This attribute specifies the DMM frame VLAN priority. | ||||
| CcfmMepRxCCMs | 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.13 | PerfCounter64 | RO | |
column · PerfCounter64 · read-only · current This provides the total number of received CCMs on the MEP. | ||||
| CcfmMepErrCCMs | 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.14 | PerfCounter64 | RO | |
column · PerfCounter64 · read-only · current This provides the total number of errored CCMs on the MEP. | ||||
| CcfmMepLLFTriggerTypes | 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.15 | CfmLLFTriggerTypes | RC | |
column · CfmLLFTriggerTypes · read-create · current This bit mask indicates the CFM triggers that result in link loss forwarding. | ||||
| CcfmMepDefects | 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.16 | CfmMepDefects | RO | |
column · CfmMepDefects · read-only · current This bit mask indicates defects that not defined in standard 802.1ag MIB such as AIS defect. | ||||
| CcfmMepTagEtherType | 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.17 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current This object allows management of Ether Type for MEP VLAN Tag for the MEPs. | ||||
| CcfmMepStatsAction | 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.18 | CmPmBinAction | RW | |
column · CmPmBinAction · read-write · current Allows the Manager to clear the CFM level statistics : cfmMepRxCCMs, cfmMepErrCCMs. | ||||
| CcfmMepLbmInterval | 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.19 | Integer32 | RC | |
column · Integer32 · read-create · current ETH-LBM frame transmission interval. | ||||
| CcfmMepOperationalState | 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.20 | OperationalState | RO | |
column · OperationalState · read-only · current This object represents the Operational State of the CFM MEP. | ||||
| CcfmMepSecondaryState | 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.21 | SecondaryState | RO | |
column · SecondaryState · read-only · current This object represents the Secondary State of the CFM MEP. | ||||
| CcfmMepSlmEnabled | 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.22 | CfmSlmEnabledTypes | RW | |
column · CfmSlmEnabledTypes · read-write · current This bit mask indicates the whether SLM is enabled per each COS. | ||||
| CcfmMepAssociatedObject | 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.23 | VariablePointer | RW | |
column · VariablePointer · read-write · current This object represents the associated port, it could be port, flow or flow point. | ||||
| CcfmMepPduVersion | 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.24 | CfmPduVersionType | RW | |
column · CfmPduVersionType · read-write · current This object indicates the version of the Y.1731 OAM PDUs | ||||
| CcfmMepLlbResponderEnabled | 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.25 | TruthValue | RW | |
column · TruthValue · read-write · current This attribute specifies whether Latching Loopback Responder function is enabled. | ||||
| CcfmMepLlbPortLLEnabled | 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.26 | TruthValue | RW | |
column · TruthValue · read-write · current This attribute enables port loopback. In MEF 46 loopback is based on LLFS (Latching Loopback Frame Set) which is untagged or tagged. MEF 46 does not have the notion of port loopback. If this attribute is true a port loopback will be activated instead of loopback for untagged frames when LLFS is untagged. | ||||
| CcfmMepLlbVidList | 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.27 | DisplayString (SIZE (0..512)) | RW | |
column · DisplayString (SIZE (0..512)) · read-write · current This is a list of VIDs on which Latching Loopback is allowed. An empty list indicates it is allowed on any VID. This list is shall allow combination of individual VIDs and or ranges. VIDs or VID ranges are comma separated. VID ranges are of the form X1:X2 (range of VIDs from X1 to X2). | ||||
| CcfmMepCcmInterfaceStatusTLVControl | 1.3.6.1.4.1.2544.1.12.13.1.1.2.1.28 | TruthValue | RW | |
column · TruthValue · read-write · current This attribute controls MEP option of the insertion of the Interface Status TLV in CCM messages. | ||||
| TcfmAccPortQosShaperTable | 1.3.6.1.4.1.2544.1.12.13.1.1.3 | NA | ||
table · not-accessible · current A list of configurable profile entries for CFM QoS Shapers for Access Port. | ||||
| RcfmAccPortQosShaperEntry | 1.3.6.1.4.1.2544.1.12.13.1.1.3.1 | NA | ||
row · not-accessible · current A list of parameters that set up the CFM QoS Queue profiles. This shaper is created automatically when the first Down MEP is created on a Access Port. | ||||
| CcfmAccPortQosShaperIndex | 1.3.6.1.4.1.2544.1.12.13.1.1.3.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current A unique index associated with the type of Access Port Based Shaper. Index 1 refers to the Shaper associated with PORT-based Down MEPs, Index 2 refers to the Shaper associated with the VID-based Down MEPs. | ||||
| CcfmAccPortQosShaperCIR | 1.3.6.1.4.1.2544.1.12.13.1.1.3.1.2 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current This object identifies the queue CIR. | ||||
| CcfmAccPortQosShaperBufSize | 1.3.6.1.4.1.2544.1.12.13.1.1.3.1.3 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current This object identifies the queue buffer size. | ||||
| CcfmAccPortQosShaperAdminState | 1.3.6.1.4.1.2544.1.12.13.1.1.3.1.4 | AdminState | RW | |
column · AdminState · read-write · current This object allows the management of the Shaper Administrative State. Only 'in-service' and 'management' states are allowed. | ||||
| TcfmNetPortQosShaperTable | 1.3.6.1.4.1.2544.1.12.13.1.1.4 | NA | ||
table · not-accessible · current A list of configurable profile entries for CFM QoS Shapers for Network Port. | ||||
| RcfmNetPortQosShaperEntry | 1.3.6.1.4.1.2544.1.12.13.1.1.4.1 | NA | ||
row · not-accessible · current A list of parameters that set up the CFM QoS Queue profiles. This shaper is created automatically when the first Down MEP is created on a Network Port. | ||||
| CcfmNetPortQosShaperTypeIndex | 1.3.6.1.4.1.2544.1.12.13.1.1.4.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current A unique index associated with the type of Network Port Based Shaper. Index 1 refers to the Shaper associated with PORT-based Down MEPs, Index 2 refers to the Shaper associated with the VID-based Down MEPs. | ||||
| CcfmNetPortQosShaperCIR | 1.3.6.1.4.1.2544.1.12.13.1.1.4.1.2 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current This object identifies the queue CIR. | ||||
| CcfmNetPortQosShaperBufSize | 1.3.6.1.4.1.2544.1.12.13.1.1.4.1.3 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current This object identifies the queue buffer size. | ||||
| CcfmNetPortQosShaperAdminState | 1.3.6.1.4.1.2544.1.12.13.1.1.4.1.4 | AdminState | RW | |
column · AdminState · read-write · current This object allows the management of the Shaper Administrative State. Only 'in-service' and 'management' states are allowed. | ||||
| TcfmServerMepTable | 1.3.6.1.4.1.2544.1.12.13.1.1.5 | NA | ||
table · not-accessible · current Server MEP management table. | ||||
| RcfmServerMepEntry | 1.3.6.1.4.1.2544.1.12.13.1.1.5.1 | NA | ||
| CcfmServerMepIndex | 1.3.6.1.4.1.2544.1.12.13.1.1.5.1.1 | Integer32 | RC | |
column · Integer32 · read-create · current The integer index value corresponding to a Server MEP. | ||||
| CcfmServerMepAssociatedPort | 1.3.6.1.4.1.2544.1.12.13.1.1.5.1.2 | VariablePointer | RC | |
column · VariablePointer · read-create · current This is the port on which the CFM Server MEP is created. | ||||
| CcfmServerMepAisClientMdLevel | 1.3.6.1.4.1.2544.1.12.13.1.1.5.1.3 | Dot1agCfmMDLevel | RC | |
column · Dot1agCfmMDLevel · read-create · current AIS Client MD level which is the MD level used to identify any higher level local MEPs for which AIS defect needs to be set or MD level of the ETH-AIS frame generated if there are no local MEPs at this MD level. | ||||
| CcfmServerMepAisInterval | 1.3.6.1.4.1.2544.1.12.13.1.1.5.1.4 | CfmAisInterval | RC | |
column · CfmAisInterval · read-create · current ETH-AIS frame transmission interval if decision is made to transmit the ETH-AIS frame. | ||||
| CcfmServerMepAisGenEnabled | 1.3.6.1.4.1.2544.1.12.13.1.1.5.1.5 | TruthValue | RC | |
column · TruthValue · read-create · current This flag enables/disables propagation of ETH-AIS to client MD levels. | ||||
| CcfmServerMepAisPriority | 1.3.6.1.4.1.2544.1.12.13.1.1.5.1.6 | VlanPriority | RC | |
column · VlanPriority · read-create · current This VLAN priority of the ETH-AIS frame. | ||||
| CcfmServerMepStorageType | 1.3.6.1.4.1.2544.1.12.13.1.1.5.1.7 | StorageType | RC | |
column · StorageType · read-create · current The type of storage configured for this entry. | ||||
| CcfmServerMepRowStatus | 1.3.6.1.4.1.2544.1.12.13.1.1.5.1.8 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cfmServerMepRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cfmServerMepRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cfmServerMepRowStatus object may be modified if the associated instance of this object is equal to active(1). | ||||
| CcfmServerMepAdminState | 1.3.6.1.4.1.2544.1.12.13.1.1.5.1.9 | AdminState | RW | |
column · AdminState · read-write · current This object represents the Administrative State of the Server MEP. | ||||
| CcfmServerMepOperationalState | 1.3.6.1.4.1.2544.1.12.13.1.1.5.1.10 | OperationalState | RO | |
column · OperationalState · read-only · current This object represents the Operational State of the Server MEP. | ||||
| CcfmServerMepSecondaryState | 1.3.6.1.4.1.2544.1.12.13.1.1.5.1.11 | SecondaryState | RO | |
column · SecondaryState · read-only · current This object represents the Secondary State of the CFM MEP. | ||||
| TcfmDownMEPQosShaperTable | 1.3.6.1.4.1.2544.1.12.13.1.1.6 | NA | ||
table · not-accessible · current A list of configurable profile entries for CFM QoS Shapers for down MEPs. | ||||
| RcfmDownMEPQosShaperEntry | 1.3.6.1.4.1.2544.1.12.13.1.1.6.1 | NA | ||
row · not-accessible · current A list of parameters that set up the CFM QoS Queue profiles. This shaper is created automatically when the first Down MEP is created on a Port. Note, this queues is valid for port based Down MEPs, VID based down MEPs on NNI port. | ||||
| CcfmDownMEPQosShaperIndex | 1.3.6.1.4.1.2544.1.12.13.1.1.6.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current A unique index associated with the Shaper for Down MEPs. | ||||
| CcfmDownMEPQosShaperType | 1.3.6.1.4.1.2544.1.12.13.1.1.6.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current Type of Shaper for Down MEPs. 1 refers to the Shaper associated with Down MEPs(for both port based and VID based) fot Transimit direction, 2 refers to the Shaper associated with Down MEPs(for both port based and VID based) fot Receiving direction | ||||
| CcfmDownMEPQosShaperCIR | 1.3.6.1.4.1.2544.1.12.13.1.1.6.1.3 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current This object identifies the queue CIR. | ||||
| CcfmDownMEPQosShaperProfile | 1.3.6.1.4.1.2544.1.12.13.1.1.6.1.4 | VariablePointer | RW | |
column · VariablePointer · read-write · current This object identifies the OID of cmQosQueueProfileIndex in the cmQosQueueProfileTable. | ||||
| CcfmDownMEPQosShaperAdminState | 1.3.6.1.4.1.2544.1.12.13.1.1.6.1.5 | AdminState | RW | |
column · AdminState · read-write · current This object allows the management of the Shaper Administrative State. Only 'in-service' and 'management' states are allowed. | ||||
| TcfmMepExcludedMepListTable | 1.3.6.1.4.1.2544.1.12.13.1.1.7 | NA | ||
table · not-accessible · current A list of configurable profile entries for CFM excluded mep list. | ||||
| RcfmMepExcludedMepListEntry | 1.3.6.1.4.1.2544.1.12.13.1.1.7.1 | NA | ||
row · not-accessible · current Excluded Remote Mep List for local Mep, not expected to receive OAM from these MEPs. | ||||
| CcfmMepExcludedMepListIdentifier | 1.3.6.1.4.1.2544.1.12.13.1.1.7.1.1 | Unsigned32 (1..8191) | NA | |
column · Unsigned32 (1..8191) · not-accessible · current A unique index associated with CfmMepExcludedMepListEntry. | ||||
| CcfmMepExcludedMepListRowStatus | 1.3.6.1.4.1.2544.1.12.13.1.1.7.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cfmMepExcludedMepListRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cfmMepExcludedMepListRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cfmMepExcludedMepListRowStatus object may be modified if the associated instance of this object is equal to active(1). | ||||
| TcfmMepLbrTable | 1.3.6.1.4.1.2544.1.12.13.1.1.8 | NA | ||
table · not-accessible · current A list of configurable profile entries for MepLbr. | ||||
| RcfmMepLbrEntry | 1.3.6.1.4.1.2544.1.12.13.1.1.8.1 | NA | ||
row · not-accessible · current MEP LBR statistic table. | ||||
| CcfmMepLbrMacAddress | 1.3.6.1.4.1.2544.1.12.13.1.1.8.1.1 | MacAddress | RO | |
column · MacAddress · read-only · current Source Mac Address of LBR. | ||||
| CcfmMepLbrMepId | 1.3.6.1.4.1.2544.1.12.13.1.1.8.1.2 | Integer32 | RO | |
column · Integer32 · read-only · current Remote MEP ID. | ||||
| CcfmMepLbrInOrder | 1.3.6.1.4.1.2544.1.12.13.1.1.8.1.3 | PerfCounter64 | RO | |
column · PerfCounter64 · read-only · current Total valid in-order LBR received. | ||||
| CcfmMepLbrOutOfOder | 1.3.6.1.4.1.2544.1.12.13.1.1.8.1.4 | PerfCounter64 | RO | |
column · PerfCounter64 · read-only · current Total valid out of order LBR received. | ||||
| TcfmMaCompTable | 1.3.6.1.4.1.2544.1.12.13.1.1.9 | NA | ||
table · not-accessible · current A additional list of MA components. | ||||
| RcfmMaCompEntry | 1.3.6.1.4.1.2544.1.12.13.1.1.9.1 | NA | ||
| CcfmMaCompIndex | 1.3.6.1.4.1.2544.1.12.13.1.1.9.1.1 | Unsigned32 | RO | |
column · Unsigned32 · read-only · current This object represents the maComp number value. | ||||
| CcfmMaCompEntity | 1.3.6.1.4.1.2544.1.12.13.1.1.9.1.2 | VariablePointer | RC | |
column · VariablePointer · read-create · current This object represents the maComp entity, it is should be port or flow's oid. | ||||
| TcfmMaNetTable | 1.3.6.1.4.1.2544.1.12.13.1.1.10 | NA | ||
table · not-accessible · current A additional list of MA. | ||||
| RcfmMaNetEntry | 1.3.6.1.4.1.2544.1.12.13.1.1.10.1 | NA | ||
| CcfmMaNetRemoteMepAutoDiscovery | 1.3.6.1.4.1.2544.1.12.13.1.1.10.1.1 | TruthValue | RW | |
column · TruthValue · read-write · current This object represents whether learn remote mep automatically. | ||||
| CcfmMaNetMepNumbers | 1.3.6.1.4.1.2544.1.12.13.1.1.10.1.2 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current This object represents the max number of meps per MA. | ||||
| TcfmTrafficPortQosShaperTable | 1.3.6.1.4.1.2544.1.12.13.1.1.11 | NA | ||
table · not-accessible · current A list of configurable entries for CFM QoS Shapers for Traffic Ports. | ||||
| RcfmTrafficPortQosShaperEntry | 1.3.6.1.4.1.2544.1.12.13.1.1.11.1 | NA | ||
row · not-accessible · current A list of parameters that set up the CFM QoS Queue profiles. This shaper is created automatically when the first Down MEP is created on a Traffic Port. | ||||
| CcfmTrafficPortQosShaperIndex | 1.3.6.1.4.1.2544.1.12.13.1.1.11.1.1 | Integer32 | NA | |
column · Integer32 · not-accessible · current A unique index associated with the type of Traffic Port Based Shaper. Index 1 refers to the Shaper associated with PORT-based Down MEPs, Index 2 refers to the Shaper associated with the VID-based Down MEPs. | ||||
| CcfmTrafficPortQosShaperCIR | 1.3.6.1.4.1.2544.1.12.13.1.1.11.1.2 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current This object identifies the queue CIR. | ||||
| CcfmTrafficPortQosShaperBufSize | 1.3.6.1.4.1.2544.1.12.13.1.1.11.1.3 | Unsigned32 | RW | |
column · Unsigned32 · read-write · current This object identifies the queue buffer size. | ||||
| CcfmTrafficPortQosShaperAdminState | 1.3.6.1.4.1.2544.1.12.13.1.1.11.1.4 | AdminState | RW | |
column · AdminState · read-write · current This object allows the management of the Shaper Administrative State. Only 'in-service' and 'management' states are allowed. | ||||
| TcfmMepLlbMacAddressTable | 1.3.6.1.4.1.2544.1.12.13.1.1.12 | NA | ||
table · not-accessible · current A additional list of MAC Addresses. | ||||
| RcfmLlbMacAddressEntry | 1.3.6.1.4.1.2544.1.12.13.1.1.12.1 | NA | ||
row · not-accessible · current A conceptual row in the cfmMepLlbMacAddressTable. | ||||
| CcfmLlbMacAddress | 1.3.6.1.4.1.2544.1.12.13.1.1.12.1.1 | MacAddress | NA | |
column · MacAddress · not-accessible · current This object represents the Latching Loopback MAC Addresses. | ||||
| CcfmLlbMacAddressRowStatus | 1.3.6.1.4.1.2544.1.12.13.1.1.12.1.2 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cfmLlbMacAddressRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cfmLlbMacAddressRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cfmLlbMacAddressRowStatus object may be modified if the associated instance of this object is equal to active(1). | ||||
| NcfmExtSvcConformance | 1.3.6.1.4.1.2544.1.12.13.1.2 | |||
| NcfmExtSvcCompliances | 1.3.6.1.4.1.2544.1.12.13.1.2.1 | |||
| McfmExtCompliance | 1.3.6.1.4.1.2544.1.12.13.1.2.1.1 | |||
compliance · current Describes the requirements for conformance to the CFM Extensions. | ||||
| NcfmExtSvcGroups | 1.3.6.1.4.1.2544.1.12.13.1.2.2 | |||
| GcfmExtGroup | 1.3.6.1.4.1.2544.1.12.13.1.2.2.1 | deprecated | ||
group · deprecated ******************THIS OBJECT GROUP IS NOW DEPRECATED ****************** A collection of objects used to identify CFM extension implementation compliance.
| ||||
| GcfmGenGroup | 1.3.6.1.4.1.2544.1.12.13.1.2.2.2 | |||
group · current A collection of objects used to identify CFM extension implementation compliance. | ||||
| GcfmMepGroup | 1.3.6.1.4.1.2544.1.12.13.1.2.2.3 | |||
group · current A collection of objects used to identify additional CFM MEP functions.
| ||||
| GcfmPortShaperGroup | 1.3.6.1.4.1.2544.1.12.13.1.2.2.4 | |||
group · current A collection of objects used to identify CFM Port Shaper functionality. | ||||
| GcfmServerMepGroup | 1.3.6.1.4.1.2544.1.12.13.1.2.2.5 | |||
group · current A collection of objects used to identify CFM Server MEP functionality. | ||||
| GcfmMaCompGroup | 1.3.6.1.4.1.2544.1.12.13.1.2.2.6 | |||
group · current A collection of additional objects used to show maComp.
| ||||
Textual conventions
CfmAisGenTriggerTypesBitsbAisDefAis(3)bAisDefErrorCCM(1)bAisDefRemoteCCM(0)bAisDefXconCCM(2)Bit Mask that specifies all the defects that can trigger AIS to be generated.
CfmAisIntervalINTEGERaisInterval1min(2)aisInterval1sec(1)AIS interval which is the frequency of ETH-AIS frame generation. Note the values of the 1 second and 1 minute integers which are aligned with the values defined for the AIS interval for AIS PDU in Y.1731.
CfmLLFTriggerTypesBitsbAis(0)bCcmIfStatusTlv(1)bRDI(3)bRemoteCCM(2)Bit Mask that specifies all the conditions that trigger a link loss forwarding.
CfmLmmDmmIntervalINTEGERinterval100msec(2)interval10msec(1)interval10sec(4)interval1min(5)interval1sec(3)Y.1731 Loss or delay measurement frame transmission interval.
CfmMepDefectsBitsbDefAIS(0)A MEP can detect and report a number of defects such as RDI, MACStatus, RMEP CCM, Error CCM, Xconn CCM. These are are defined in Dot1agCfmMepDefects in standard 802.1ag MIB. Y.1731 adds additional defects such as AIS defect which is defined here. bDefAIS(0) A MEP received an ETH-AIS frame/indication.
CfmPduVersionTypeINTEGERnotApplicable(0)y1731-2008(1)y1731-2011(2)Indicates the version of the Y.1731 OAM PDUs. y1731-2008 -- Indicates the PDU formats defined in Y.1731-2008. y1731-2011 -- Indicates the PDU formats defined in Y.1731-2011.
CfmSignalFailTriggersBitsais(4)erroredCcm(2)rdiCcm(0)remoteCcm(1)xconCcm(3)Bit Mask that specifies all the conditions that trigger Signal Fail.
CfmSlmEnabledTypesBitscos0(0)cos1(1)cos2(2)cos3(3)cos4(4)cos5(5)cos6(6)cos7(7)Bit Mask that specifies all the priorities.