CM-PROTECTION-MIB
ADVA AG Optical NetworkingThis module defines the Protection MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
snmptranslate -m CM-PROTECTION-MIB -Tpsnmpwalk -v2c -c <community> -m CM-PROTECTION-MIB <host> 1.3.6.1.4.1.2544.1.12.7Imports
| ADVA-MIB | fsp150cm |
|---|---|
| CM-ENTITY-MIB | neIndex, shelfIndex, slotIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, StorageType, TEXTUAL-CONVENTION, TruthValue, VariablePointer |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IcmProtectionMIB | 1.3.6.1.4.1.2544.1.12.7 | |||
identity This module defines the Protection MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking. | ||||
| NcmProtObjects | 1.3.6.1.4.1.2544.1.12.7.1 | |||
| TcmFacProtGroupTable | 1.3.6.1.4.1.2544.1.12.7.1.1 | NA | ||
table · not-accessible · current A list of entries corresponding to the Facility Protection Groups. Entries can be created/deleted in this table by management application action. | ||||
| RcmFacProtGroupEntry | 1.3.6.1.4.1.2544.1.12.7.1.1.1 | NA | ||
row · not-accessible · current An entry containing information applicable to a particular Protection Group. | ||||
| CcmFacProtGroupIndex | 1.3.6.1.4.1.2544.1.12.7.1.1.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current Unique index value associated with the Facility Protection Group. | ||||
| CcmFacProtGroupUserLabel | 1.3.6.1.4.1.2544.1.12.7.1.1.1.2 | DisplayString (SIZE (0..64)) | RC | |
column · DisplayString (SIZE (0..64)) · read-create · current User Label associated with the Facility Protection Group. | ||||
| CcmFacProtGroupSwitchMode | 1.3.6.1.4.1.2544.1.12.7.1.1.1.3 | CmProtSwitchMode | RC | |
column · CmProtSwitchMode · read-create · current Facility Protection Group's Protection Switch Mode. | ||||
| CcmFacProtGroupRevertive | 1.3.6.1.4.1.2544.1.12.7.1.1.1.4 | TruthValue | RC | |
column · TruthValue · read-create · current Whether the Facility Protection is revertive or not. This object is not applicable for cmFacProtGroupSwitchMode 'dualactiverx'. | ||||
| CcmFacProtGroupWaitToRestore | 1.3.6.1.4.1.2544.1.12.7.1.1.1.5 | Integer32 (1..60 | 0) | RC | |
column · Integer32 (1..60 | 0) · read-create · current Time in minutes to wait before reverting to Working facility in case of cmFacProtGroupRevertive set to revertive. This object is not applicable for cmFacProtGroupSwitchMode 'dualactiverx'. | ||||
| CcmFacProtGroupDirection | 1.3.6.1.4.1.2544.1.12.7.1.1.1.6 | CmProtSwitchDirection | RC | |
column · CmProtSwitchDirection · read-create · current Supported Protection Group Switch direction. This object is not applicable for cmFacProtGroupSwitchMode 'dualactiverx'. | ||||
| CcmFacProtGroupWorkPort | 1.3.6.1.4.1.2544.1.12.7.1.1.1.7 | VariablePointer | RC | |
column · VariablePointer · read-create · current Facility Protection Group exists between 2 facilities (ports). This object represents the WORKING facility Port. | ||||
| CcmFacProtGroupProtPort | 1.3.6.1.4.1.2544.1.12.7.1.1.1.8 | VariablePointer | RC | |
column · VariablePointer · read-create · current This object represents the PROTECT facility Network Element Port when cmFacProtGroupSwitchMode is oneplusone. In the case of dualactiverx, this represents the second active port. | ||||
| CcmFacProtGroupStatus | 1.3.6.1.4.1.2544.1.12.7.1.1.1.9 | CmProtGroupStatus | RO | |
column · CmProtGroupStatus · read-only · current This object represents the PROTECTION group status. | ||||
| CcmFacProtGroupAction | 1.3.6.1.4.1.2544.1.12.7.1.1.1.10 | CmProtSwitchAction | RW | |
column · CmProtSwitchAction · read-write · current User initiated protection switch action. | ||||
| CcmFacProtGroupStorageType | 1.3.6.1.4.1.2544.1.12.7.1.1.1.11 | StorageType | RC | |
column · StorageType · read-create · current The type of storage configured for this entry. | ||||
| CcmFacProtGroupRowStatus | 1.3.6.1.4.1.2544.1.12.7.1.1.1.12 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmFacProtGroupRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmFacProtGroupRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmFacProtGroupRowStatus object may be modified if the associated instance of this object is equal to active(1). | ||||
| CcmFacProtGroupMacAddress | 1.3.6.1.4.1.2544.1.12.7.1.1.1.13 | MacAddress | RO | |
column · MacAddress · read-only · current This object allows retrieval of the Mac Address of the PROTECTION group. | ||||
| TcmFacProtUnitTable | 1.3.6.1.4.1.2544.1.12.7.1.2 | NA | ||
table · not-accessible · current A list of entries corresponding to the Facility Protection Units. | ||||
| RcmFacProtUnitEntry | 1.3.6.1.4.1.2544.1.12.7.1.2.1 | NA | ||
row · not-accessible · current An entry containing information applicable to a particular Protection Unit. | ||||
| CcmFacProtUnitIndex | 1.3.6.1.4.1.2544.1.12.7.1.2.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current Unique index value associated with the Facility Protection Unit. | ||||
| CcmFacProtUnitType | 1.3.6.1.4.1.2544.1.12.7.1.2.1.2 | CmProtUnitType | RO | |
column · CmProtUnitType · read-only · current Facility Protection Unit's Type, i.e. whether working or protect. | ||||
| CcmFacProtUnitState | 1.3.6.1.4.1.2544.1.12.7.1.2.1.3 | CmProtUnitState | RO | |
column · CmProtUnitState · read-only · current Facility Protection Unit's State, i.e. whether active or standby. | ||||
| CcmFacProtUnitPort | 1.3.6.1.4.1.2544.1.12.7.1.2.1.4 | VariablePointer | RO | |
column · VariablePointer · read-only · current Facility Protection Unit's points to a facility (port). This object represents the facility Network Element port. | ||||
| TcmMSPGroupTable | 1.3.6.1.4.1.2544.1.12.7.1.3 | NA | ||
table · not-accessible · current A list of entries corresponding to the Multiplex Section Protection Groups. Entries can be created/deleted in this table by management application action. | ||||
| RcmMSPGroupEntry | 1.3.6.1.4.1.2544.1.12.7.1.3.1 | NA | ||
row · not-accessible · current An entry containing information applicable to a particular Protection Group.
| ||||
| CcmMSPGroupIndex | 1.3.6.1.4.1.2544.1.12.7.1.3.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current Unique index value associated with the Multiplex Section Protection Group. | ||||
| CcmMSPGroupUserLabel | 1.3.6.1.4.1.2544.1.12.7.1.3.1.2 | DisplayString (SIZE (0..64)) | RC | |
column · DisplayString (SIZE (0..64)) · read-create · current User Label associated with the Multiplex Section Protection Group. | ||||
| CcmMSPGroupSwitchMode | 1.3.6.1.4.1.2544.1.12.7.1.3.1.3 | CmProtSwitchMode | RC | |
column · CmProtSwitchMode · read-create · current Multiplex Section Protection Group's Protection Switch Mode. | ||||
| CcmMSPGroupRevertive | 1.3.6.1.4.1.2544.1.12.7.1.3.1.4 | TruthValue | RC | |
column · TruthValue · read-create · current Whether the Multiplex Section Protection is revertive or not. This object is not applicable for cmMSPGroupSwitchMode 'dualactiverx'. | ||||
| CcmMSPGroupWaitToRestore | 1.3.6.1.4.1.2544.1.12.7.1.3.1.5 | Integer32 (1..60 | 0) | RC | |
column · Integer32 (1..60 | 0) · read-create · current Time in minutes to wait before reverting to Working facility in case of cmMSPGroupRevertive set to revertive. This object is not applicable for cmMSPGroupSwitchMode 'dualactiverx'. | ||||
| CcmMSPGroupB2DEGTrigger | 1.3.6.1.4.1.2544.1.12.7.1.3.1.6 | TruthValue | RC | |
column · TruthValue · read-create · current B2DEG is trigger of MSP or not. | ||||
| CcmMSPGroupDirection | 1.3.6.1.4.1.2544.1.12.7.1.3.1.7 | CmProtSwitchDirection | RC | |
column · CmProtSwitchDirection · read-create · current Supported Protection Group Switch direction. This object is not applicable for cmMSPGroupSwitchMode 'dualactiverx'. | ||||
| CcmMSPGroupWorkPort | 1.3.6.1.4.1.2544.1.12.7.1.3.1.8 | VariablePointer | RC | |
column · VariablePointer · read-create · current Multiplex Section Protection Group exists between 2 facilities (ports). This object represents the WORKING facility Port. | ||||
| CcmMSPGroupProtPort | 1.3.6.1.4.1.2544.1.12.7.1.3.1.9 | VariablePointer | RC | |
column · VariablePointer · read-create · current This object represents the PROTECT facility Network Element Port when cmMSPGroupSwitchMode is oneplusone. In the case of dualactiverx, this represents the second active port. | ||||
| CcmMSPGroupStatus | 1.3.6.1.4.1.2544.1.12.7.1.3.1.10 | CmProtGroupStatus | RO | |
column · CmProtGroupStatus · read-only · current This object represents the PROTECTION group status. | ||||
| CcmMSPGroupAction | 1.3.6.1.4.1.2544.1.12.7.1.3.1.11 | CmProtSwitchAction | RW | |
column · CmProtSwitchAction · read-write · current User initiated protection switch action. | ||||
| CcmMSPGroupStorageType | 1.3.6.1.4.1.2544.1.12.7.1.3.1.12 | StorageType | RC | |
column · StorageType · read-create · current The type of storage configured for this entry. | ||||
| CcmMSPGroupRowStatus | 1.3.6.1.4.1.2544.1.12.7.1.3.1.13 | RowStatus | RC | |
column · RowStatus · read-create · current The status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of cmMSPGroupRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with cmMSPGroupRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The cmMSPGroupRowStatus object may be modified if the associated instance of this object is equal to active(1). | ||||
| CcmMSPGroupMacAddress | 1.3.6.1.4.1.2544.1.12.7.1.3.1.14 | MacAddress | RO | |
column · MacAddress · read-only · current This object allows retrieval of the Mac Address of the PROTECTION group. | ||||
| TcmMSPUnitTable | 1.3.6.1.4.1.2544.1.12.7.1.4 | NA | ||
table · not-accessible · current A list of entries corresponding to the Multiplex Section Protection Units. | ||||
| RcmMSPUnitEntry | 1.3.6.1.4.1.2544.1.12.7.1.4.1 | NA | ||
row · not-accessible · current An entry containing information applicable to a particular Protection Unit.
| ||||
| CcmMSPUnitIndex | 1.3.6.1.4.1.2544.1.12.7.1.4.1.1 | Integer32 | RO | |
column · Integer32 · read-only · current Unique index value associated with the Multiplex Section Protection Unit. | ||||
| CcmMSPUnitType | 1.3.6.1.4.1.2544.1.12.7.1.4.1.2 | CmProtUnitType | RO | |
column · CmProtUnitType · read-only · current Multiplex Section Protection Unit's Type, i.e. whether working or protect. | ||||
| CcmMSPUnitState | 1.3.6.1.4.1.2544.1.12.7.1.4.1.3 | CmProtUnitState | RO | |
column · CmProtUnitState · read-only · current Multiplex Section Protection Unit's State, i.e. whether active or standby. | ||||
| CcmMSPUnitPort | 1.3.6.1.4.1.2544.1.12.7.1.4.1.4 | VariablePointer | RO | |
column · VariablePointer · read-only · current Facility Protection Unit's points to a facility (port). This object represents the facility Network Element port. | ||||
| NcmProtNotifications | 1.3.6.1.4.1.2544.1.12.7.2 | |||
| NcmProtConformance | 1.3.6.1.4.1.2544.1.12.7.3 | |||
| NcmProtCompliances | 1.3.6.1.4.1.2544.1.12.7.3.1 | |||
| McmProtCompliance | 1.3.6.1.4.1.2544.1.12.7.3.1.1 | |||
compliance · current Describes the requirements for conformance to the CM Prot group.
| ||||
| NcmProtGroups | 1.3.6.1.4.1.2544.1.12.7.3.2 | |||
| GcmProtObjectGroup | 1.3.6.1.4.1.2544.1.12.7.3.2.1 | |||
group · current A collection of objects used to manage the Protection Object group.
| ||||
| GcmMSProtObjectGroup | 1.3.6.1.4.1.2544.1.12.7.3.2.2 | |||
group · current A collection of objects used to manage the Multiplex Section Protection Object group.
| ||||
Textual conventions
CmProtGroupStatusINTEGERforced-protect(8)forced-working(9)lockout-protect(10)manual-protect(6)manual-working(7)nooutstandingreq(1)sd-protect(4)sd-working(5)sf-protect(2)sf-working(3)waitToRestore(11)Enumerations for Protection Status. nooutstandingreq - No oustanding request, sf-protect - Signal failure on protect, sf-working - Signal failure on working, sd-protect - Signal degrade on protect, sd-working - Signal degrade on working, manual-protect - Manual on protect manual-working - Manual on working forced-working - Forced on working forced-protect - Forced on protect lockout-protect - Lockout on protect waitToRestore - Wait to restore
CmProtSwitchActionINTEGERforcedfromprotect(6)forcedfromworking(4)lockoutfromprotect(7)manualfromprotect(5)manualfromworking(3)none(1)releaseprotswitch(2)Enumerations for User initiated Protection Switch Action. manualfromworking - Manual Switch from Working, forcedfromworking - Forced Switch from Working, manualfromprotect - Manual Switch from Protect, forcedfromprotect - Forced Switch from Protect, lockoutfromprotect - Lockout from Protect
CmProtSwitchDirectionINTEGERbidirectional(2)unidirectional(1)Enumerations for Protection Switch Direction. unidirectional - Unidirectional Protection Switching, bidirectional - Bidirectional Protection Switching.
CmProtSwitchModeINTEGERdualactiverx(2)oneplusone(1)universalring(3)Enumerations for Protection Switch Mode. oneplusone - 1+1, this is the NPCUP mode, dualactiverx - In this mode, traffic is bridged in A2N direction (same as 1+1), however both network ports receive customer traffic in N2A direction. In this mode, both network ports are working, i.e. there is no protection. universalring - In this mode, traffic is bridged in A2N direction (same as 1+1), both network ports receive customer traffic in N2A direction. In this mode, both network ports are working, i.e. no protection. The main difference w.r.t dualactiverx is that traffic in N2A direction, which does not match the service definition is steered to the other network port, i.e. non-service matching traffic from N1 goes to N2 and vice versa.CmProtUnitStateINTEGERactive(1)standby(2)Enumerations for Protection Unit State. active - Active Protection Unit, standby - Standby Protection Unit.
CmProtUnitTypeINTEGERprotect(2)working(1)Enumerations for Protection Unit Type. working - Working Protection Unit, protect - Protect Protection Unit.