MIB Browser
This module defines the Common MIB definitions used by
the FSP150CM and FSP150CC product lines.
Copyright (C) ADVA.
Organization
ADVA Optical Networking SE
Root OID
1.3.6.1.4.1.2544.1.12.1
Last updated
Objects
52
Source
Show full MIB
snmptranslate -m CM-COMMON-MIB -Tp
snmpwalk -v2c -c <community> -m CM-COMMON-MIB <host> 1.3.6.1.4.1.2544.1.12.1

Imports

ADVA-MIBfsp150cm
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIBits, Counter32, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, PhysAddress, TEXTUAL-CONVENTION

OID tree

NameOIDTypeAccessStatus
IcmCommonMIB1.3.6.1.4.1.2544.1.12.1
Nsubproducts1.3.6.1.4.1.2544.1.12.1.1
Nnemihubshelf1.3.6.1.4.1.2544.1.12.1.1.1
Nge1011.3.6.1.4.1.2544.1.12.1.1.2
Nge2061.3.6.1.4.1.2544.1.12.1.1.3
Nge2011.3.6.1.4.1.2544.1.12.1.1.4
Nge201se1.3.6.1.4.1.2544.1.12.1.1.5
Nge206f1.3.6.1.4.1.2544.1.12.1.1.6
Ncmagg1.3.6.1.4.1.2544.1.12.1.1.7
Nge1121.3.6.1.4.1.2544.1.12.1.1.8
Nge1141.3.6.1.4.1.2544.1.12.1.1.9
Nge206v1.3.6.1.4.1.2544.1.12.1.1.10
Nxg2101.3.6.1.4.1.2544.1.12.1.1.11
Nt18041.3.6.1.4.1.2544.1.12.1.1.12
Nt32041.3.6.1.4.1.2544.1.12.1.1.13
Ngesyncprobe1.3.6.1.4.1.2544.1.12.1.1.14
Nge114H1.3.6.1.4.1.2544.1.12.1.1.15
Nge114PH1.3.6.1.4.1.2544.1.12.1.1.16
Nge114S1.3.6.1.4.1.2544.1.12.1.1.17
Nge114SH1.3.6.1.4.1.2544.1.12.1.1.18
Nsh1pcs1.3.6.1.4.1.2544.1.12.1.1.19
Nge112Pro1.3.6.1.4.1.2544.1.12.1.1.20
Nge112ProM1.3.6.1.4.1.2544.1.12.1.1.21
Nge114Pro1.3.6.1.4.1.2544.1.12.1.1.22
Nge114ProC1.3.6.1.4.1.2544.1.12.1.1.23
Nge114ProSH1.3.6.1.4.1.2544.1.12.1.1.24
Nge114ProCSH1.3.6.1.4.1.2544.1.12.1.1.25
Nge114ProHE1.3.6.1.4.1.2544.1.12.1.1.26
Nxg210c1.3.6.1.4.1.2544.1.12.1.1.27
Nge112ProH1.3.6.1.4.1.2544.1.12.1.1.28
Nge114G1.3.6.1.4.1.2544.1.12.1.1.29
Nge114ProVMH1.3.6.1.4.1.2544.1.12.1.1.30
Nge114ProVMCH1.3.6.1.4.1.2544.1.12.1.1.31
Nge114ProVMCSH1.3.6.1.4.1.2544.1.12.1.1.32
Nge112ProVM1.3.6.1.4.1.2544.1.12.1.1.33
Nge101Pro1.3.6.1.4.1.2544.1.12.1.1.34
Ngo102ProS1.3.6.1.4.1.2544.1.12.1.1.35
Ngo102ProSP1.3.6.1.4.1.2544.1.12.1.1.36
Ncx101Pro30A1.3.6.1.4.1.2544.1.12.1.1.37
Ncx102Pro30A1.3.6.1.4.1.2544.1.12.1.1.38
Nxg116Pro1.3.6.1.4.1.2544.1.12.1.1.39
Nxg120Pro1.3.6.1.4.1.2544.1.12.1.1.40
Nxg116ProH1.3.6.1.4.1.2544.1.12.1.1.41
Nge102ProH1.3.6.1.4.1.2544.1.12.1.1.42
Nge102ProEFMH1.3.6.1.4.1.2544.1.12.1.1.43
Ngo102ProSM1.3.6.1.4.1.2544.1.12.1.1.44
Nxg118ProSH1.3.6.1.4.1.2544.1.12.1.1.45
Nxg118ProacSH1.3.6.1.4.1.2544.1.12.1.1.46
Nge114ProVMSH1.3.6.1.4.1.2544.1.12.1.1.47
Nge1041.3.6.1.4.1.2544.1.12.1.1.48
Nxg120ProSH1.3.6.1.4.1.2544.1.12.1.1.49
Nf3Capabilities1.3.6.1.4.1.2544.1.12.1.2

Textual conventions

AdminState INTEGER

disabled(4) in-service(1) maintenance(3) management(2) monitored(6) unassigned(5)

Administrative State used for FSP150CM entities.
in-service - represents normal, in-service, traffic passing
             state of the Entity;
management - represents the traffic passing state,
             however, alarms are not reported
maintenance- represents the mandatory state of operating
             loopbacks, ECPA test as well as Etherjack
             diagnosis operations, alarms are not reported
disabled   - represents the disabled state, user traffic is not passed,
             management traffic is passed, alarms are not reported
unassigned - represents the disabled state,
             traffic(user or management) is not passed,
             alarms are not monitored.
monitored  - represents the monitored state.
             Used for retrieving performance monitoring on entity, but entity can't be used for normal operation.
             Alarms are reported
AfpTagControl INTEGER

both(3) ctag(1) stag(2)

Describes the Afp Tag Control.
ClassOfServiceType INTEGER

cos-five(6) cos-four(5) cos-not-applicable(0) cos-one(2) cos-seven(8) cos-six(7) cos-three(4) cos-two(3) cos-zero(1)

Class of Service Types.
CmP2PFlowType INTEGER

eline(1)

Describes the Agg Flow Type,incluing e-line.
CmPmBinAction INTEGER

clear(1) not-applicable(0)

Provides ability to clear the contents of PM bin.
CmPmIntervalType INTEGER

interval-15min(1) interval-1day(2) interval-5min(4) rollover(3)

Describes the Performance Monitoring Interval Type.
CmTrafficACLPriorityType INTEGER

acl-dscp(2) acl-tos(1) notApplicable(0)

Describes the Traffic acl priority type, including tos, dscp and traffic class.
CmTrafficAclFilterActionType INTEGER

deny(2) permit(1)

Enumerations for Access Control List
permit - Permit access,
deny   - Deny access.
CmTrafficAclFilterType INTEGER

ipv4(2) ipv6(3) mac(1)

Describes the Traffic acl filter type, including
MAC
IPV4
IPV6.
CmTrafficAclProtocolType INTEGER

notApplicable(0) tcp(1) udp(2)

Describes the Traffic acl protocol type, including
tcp
udp.
Decimal32 Unsigned32
The value is encoded in a Decimal32 interchange format.
The decimal value should be calculated as follows:

(-1)^sign x 10^(exponent-101) x mantissa

The individual components of the equation are coded in two different
formats depending on the range of the mantissa.

Format A:
Second and third bits can be: 00, 01 or 10

s EEeeeeee mmmmmmm mmmmmmmm mmmmmmmm

sign: coded on a 1 bit - s
exponent: coded on 8 bits - EEeeeeee
where EE: 00, 01 or 10
mantissa: coded on 24 bits - 0mmmmmmm mmmmmmmm mmmmmmmm

Format B:
For a larger mantissa.
Second and third bits are: 11

s 11 EEeeeeee mmmmm mmmmmmmm mmmmmmmm

sign: coded on a 1 bit - s
exponent: coded on 8 bits - EEeeeeee
where EE: 00, 01 or 10
mantissa: coded on 24 bits - 100mmmmm mmmmmmmm mmmmmmmm
EthernetMediaType INTEGER

auto(4) copper(1) coppersfp(3) fiber(2) none(5) not-applicable(0) vmServerBackplane(7) xdsl(6)

Describes the Ethernet Port Media Type.
EthernetPortSpeed INTEGER

speed-1000MB-full(5) speed-1000MB-half(6) speed-100MB-full(3) speed-100MB-half(4) speed-10G-full(20) speed-10MB-full(1) speed-10MB-half(2) speed-auto(7) speed-auto-1000MB-full(12) speed-auto-1000MB-full-master(15) speed-auto-1000MB-full-master-preferred(18) speed-auto-1000MB-full-slave(16) speed-auto-1000MB-full-slave-preferred(19) speed-auto-1000MB-half(13) speed-auto-100MB-full(10) speed-auto-100MB-half(11) speed-auto-10MB-full(8) speed-auto-10MB-half(9) speed-auto-detect(21) speed-negotiating(14) speed-none(17) speed-unknown(0)

Describes the Ethernet Port Speed.
speed-unknown    : speed unknown
speed-10MB-full  : fixed speed 10MB full duplex
speed-10MB-half  : fixed speed 10MB half duplex
speed-100MB-full : fixed speed 100MB full duplex
speed-100MB-half : fixed speed 100MB half duplex
speed-1000MB-full    : fixed speed 1000MB full duplex
speed-1000MB-half    : fixed speed 1000MB half duplex
speed-auto       : Auto negotiation, advertise all speeds
speed-auto-10MB-full : Auto negotiation, advertise 10MB full duplex
speed-auto-10MB-half : Auto negotiation, advertise 10MB half duplex
speed-auto-100MB-full: Auto negotiation, advertise 100MB full duplex
speed-auto-100MB-half: Auto negotiation, advertise 100MB half duplex
speed-auto-1000MB-full: Auto negotiation, advertise 1000MB full duplex
speed-auto-1000MB-half: Auto negotiation, advertise 1000MB half duplex
speed-negotiating    : Auto negotiating, transient state
speed-auto-1000MB-full-master : Auto negotiation, advertise 1000MB full duplex, sync master
speed-auto-1000MB-full-slave : Auto negotiation, advertise 1000MB full duplex, sync slave
speed-none :                   Used to denote speed, when negotiating
speed-auto-1000MB-full-master-preferred : Auto negotiation,
                                          advertise 1000MB full duplex, preferred sync master
speed-auto-1000MB-full-slave-preferred : Auto negotiation,
                                          advertise 1000MB full duplex, preferred sync slave
speed-10G-full  : fixed speed 10G full duplex
speed-auto-detect  : Auto detect speed; iterate through available speeds and test
                     the link with remote end - if link is up at given speed, this speed is configured
.
F3DisplayString OCTET STRING (SIZE (0..2047))

Display hint: 2047a

This object is similar with DisplayString,
and the difference is its length is 2047.

Any object defined using this syntax may not exceed 2047
characters in length.
FlowSecState INTEGER

secureBlocked(2) secureNormal(1) unsecureBlocked(4) unsecureNormal(3)

Flow secure state.
IpPriorityMapMode INTEGER

none(1) not-applicable(0) priomap-dscp(3) priomap-tos(2)

This type allows choice of IP Priority Mapping Mode.
IpVersion INTEGER

ipv4(1) ipv6(2)

This type allows choice of IPv4 or IPv6 address specification.
MepDestinationType INTEGER

macaddress(2) mepid(1) not-applicable(0)

Destination MEP Types.
OperationalState INTEGER

normal(1) outage(2)

Operational State used for FSP150CM entities.
normal - represents operational state UP,
outage - represents operational state DOWN.
PerfCounter32 Counter32
This type represents a non-negative 32-bit integer. The initial
value of this integer will  be 0.  It will increment with time,
however, the value will revert back to 0 when the time period
for history interval elapses.  Typically,  this will be noticed
at 15minute intervals and 1 day intervals.  Only the rollover
interval periods will keep counting to a maximum 32-bit value
and will wrap to 0 when this occurs.
PerfCounter64 Counter64
This type represents a non-negative 64-bit integer. The initial
value of this integer will  be 0.  It will increment with time,
however, the value will revert back to 0 when the time period
for history interval elapses.  Typically,  this will be noticed
at 15minute intervals and 1 day intervals.  Only the rollover
interval periods will keep counting to a maximum 64-bit value
and will wrap to 0 when this occurs.
PortType INTEGER

eth-access(1) eth-network(2)

Enumerations for types of ports.
eth-access  - Ethernet Access Port,
eth-network - Ethernet Network Port.
PriorityMapMode INTEGER

priomap-8021p(4) priomap-8021p-inner(5) priomap-dscp(3) priomap-exp(6) priomap-exp-inner(7) priomap-none(1) priomap-tos(2)

This type allows choice of Priority Mapping Mode.
RestartType INTEGER

boot-maintenance(3) boot-normal(4) boot-pxe(5) cold-start(2) not-applicable(0) warm-start(1)

Restart Type used across all card types.
SchedActivityAction INTEGER

not-applicable(0) resume(2) suspend(1)

Scheduled Activity Action.
SchedActivityStatus INTEGER

active(2) completed(4) initial(1) suspended(3)

Scheduled Group Activity Status.
ScheduleType INTEGER

one-shot(2) periodic(1)

Describes the Schedule Type of a scheduled operation.
SecondaryState Bits

active(1) automaticinservice(2) blckd(16) cema(19) disabled(12) facilityfailure(3) fault(4) forcedoffline(13) initializing(14) lkdo(20) loopback(5) maintenance(6) mir-rx(18) mismatchedeqpt(7) mon-tx(17) nomber(21) not-applicable(0) prtcl(15) standbyhot(8) supportingentityoutage(9) unassigned(10) unequipped(11)

Secondary state used for FSP150CM entities.
active                 - Active,
automaticinservice     - Automatic In Service,
facilityfailure        - Facility Failure,
fault                  - Fault,
loopback               - Loopback,
maintenance            - Maintenance,
mismatchedeqpt         - Mismatched Equipment,
standbyhot             - Standby Hot,
supportingentityoutage - Supporting Entity Outage,
unassigned             - Unassigned,
unequipped             - Unequipped,
disabled               - Disabled,
forcedoffline          - Forced offline,
initializing           - Initializing,
prtcl                  - Protocol,
blckd                  - Blocked,
mon-tx                 - Monitor TX,
mir-rx                 - Mirror RX,
cema                   - CEMA,
lkdo                   - LKDO
SfpConnectorValue INTEGER

bnc-tnc(5) cupigtail(14) fccoaxhdr(6) fcs1cu(3) fcs2cu(4) fjack(7) hssdc(13) lc(8) mt-rj(9) mu(10) not-applicable(0) optpigtail(12) rj45(16) sc(2) sg(11) unknown(1) vendorspecific(15)

This lists the SFP connector values.
SfpIdentifierValue INTEGER

gbic(2) modsol(3) notApplicable(0) sfp(4) unknown(1) vendorSpecific(12) x2(11) xbi300pin(5) xenpak(6) xff(8) xfp(7) xfpE(9) xpak(10)

This lists the SFP identifier values.
SfpMediaType INTEGER

copper(4) multimode(2) multimode62-5(3) not-applicable(0) singlemode(1)

Describes the SFP Media Type.
SignalDirectionType INTEGER

input(1) output(2)

Signal Direction Type.
TDMFrequencySourceType INTEGER

lineTiming(3) loopTiming(1) notApplicable(0) systemTiming(2)

Enumerations for TDM Frequency Source
loopTiming,
systemTiming,
lineTiming
TrafficDirection INTEGER

a2n(1) egress(4) ingress(3) n2a(2) n2n(5)

Enumerations for direction of traffic.
a2n     - Access to Network direction,
n2a     - Network to Access direction,
ingress - Entering system direction,
egress  - Away from system direction,
n2n     - Network to Network direction.
UsbOperationalMode INTEGER

cellular-modem(1) nte-access(3) srv-access(2)

Types of usb operational mode.
UserInterfaceType INTEGER

cli(1) gui(2) netconf(3) snmp(4)

Denotes used user interface type.
VlanEthertype INTEGER

cvlan(1) svlan(2)

Describes the Vlan Ether Type,
cvlan,
svlan.
VlanId INTEGER (0..4095)
Textual Convention for the Vlan Id.
VlanPriority INTEGER (0..7)
Textual Convention for the Vlan Priority.
VlanTagType INTEGER

encapOuterVlanTag(6) inner-vlantag(1) mplsLabel(4) n2a-priorityMapping(3) outer-vlantag(2) vcLabel(5)

Textual Convention for the Type of VLAN Tag.

Used by