ADVA-FSP3000ALM-MIB
ADVA AG Optical NetworkingFiber monitoring system for fiber optical networks.
snmptranslate -m ADVA-FSP3000ALM-MIB -Tpsnmpwalk -v2c -c <community> -m ADVA-FSP3000ALM-MIB <host> 1.3.6.1.4.1.2544.1.14Imports
| ADVA-MIB | IdentityTranslation, TrapAlarmSeverity, TrapCounter |
|---|---|
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter64, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DateAndTime, DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NadvaMIB | 1.3.6.1.4.1.2544 | ||||||||||||
| Nproducts | 1.3.6.1.4.1.2544.1 | ||||||||||||
| Ifsp3000alm | 1.3.6.1.4.1.2544.1.14 | ||||||||||||
identity Fiber monitoring system for fiber optical networks. | |||||||||||||
| Ntrap | 1.3.6.1.4.1.2544.1.14.0 | ||||||||||||
| !alarmTempCPU | 1.3.6.1.4.1.2544.1.14.0.1 | ||||||||||||
notification · current This trap is sent if tempCPU value crossed tresholdMaxTempCPU threshold.
| |||||||||||||
| !alarmTempBoard1 | 1.3.6.1.4.1.2544.1.14.0.2 | ||||||||||||
notification · current This trap is sent if tempBoard1 (CPU board) value crossed tresholdMaxTempBoard1 threshold. Not used on 16ALM-1650D.
| |||||||||||||
| !alarmTempBoard2Low | 1.3.6.1.4.1.2544.1.14.0.3 | ||||||||||||
notification · current This trap is sent if tempBoard2 (laser board) value crossed tresholdMinTempBoard2 threshold.
| |||||||||||||
| !alarmTempBoard2High | 1.3.6.1.4.1.2544.1.14.0.4 | ||||||||||||
notification · current This trap is sent if tempBoard2 (laser board) value crossed tresholdMaxTempBoard2 threshold.
| |||||||||||||
| !alarmTempLaserLow | 1.3.6.1.4.1.2544.1.14.0.5 | ||||||||||||
notification · current This trap is sent if tempLaser value crossed tresholdMinTempLaser threshold. Not used on 16ALM-1650D.
| |||||||||||||
| !alarmTempLaserHigh | 1.3.6.1.4.1.2544.1.14.0.6 | ||||||||||||
notification · current This trap is sent if tempLaser value crossed tresholdMaxTempLaser threshold. Not used on 16ALM-1650D.
| |||||||||||||
| !alarmMonNotRunning | 1.3.6.1.4.1.2544.1.14.0.7 | ||||||||||||
notification · current This trap is related with enabling/disabling monitoring function by user. The relevant alarm in alarmTable refering to this trap will be set/cleared.
| |||||||||||||
| !alarmFpRunning | 1.3.6.1.4.1.2544.1.14.0.8 | ||||||||||||
notification · current This trap is related with initiating/finishing fingerprint calculation. The relevant alarm in alarmTable refering to this trap will be set/cleared. Not used on 16ALM-1650D.
| |||||||||||||
| !alarmFaRunning | 1.3.6.1.4.1.2544.1.14.0.9 | ||||||||||||
notification · current This trap is related with initiating/finishing fault analysis. The relevant alarm in alarmTable refering to this trap will be set/cleared.
| |||||||||||||
| !alarmFpMissing | 1.3.6.1.4.1.2544.1.14.0.10 | ||||||||||||
notification · current This trap is related with situation when fingerprint was not calculated for a port. The relevant alarm in alarmTable refering to this trap will be set/cleared.
| |||||||||||||
| !alarmThresCrossedFast | 1.3.6.1.4.1.2544.1.14.0.11 | ||||||||||||
notification · current This trap is sent if the absolute value of measurementLossDevFast exceeded portThresDeviationFast threshold.
| |||||||||||||
| !alarmThresCrossedMedium | 1.3.6.1.4.1.2544.1.14.0.12 | ||||||||||||
notification · current This trap is sent if the absolute value of measurementLossDevMedium exceeded portThresDeviationMedium threshold. This alarm is not supported any longer and thus it will never be raised.
| |||||||||||||
| !alarmThresCrossedSlow | 1.3.6.1.4.1.2544.1.14.0.13 | ||||||||||||
notification · current This trap is sent if the absolute value of measurementLossDevSlow exceeded portThresDeviationSlow threshold. This alarm is not supported any longer and thus it will never be raised.
| |||||||||||||
| !alarmLinkBudgetExceeded | 1.3.6.1.4.1.2544.1.14.0.14 | ||||||||||||
notification · current This trap is sent if measurementLossLinkLoss value exceeded portThresBudget threshold.
| |||||||||||||
| !alarmLinkBudgetNearlyExceeded | 1.3.6.1.4.1.2544.1.14.0.15 | ||||||||||||
notification · current This trap is sent if measurementLossLinkLoss value exceeded portThresCloseToBudget threshold.
| |||||||||||||
| !alarmManagementState | 1.3.6.1.4.1.2544.1.14.0.16 | ||||||||||||
notification · current This trap is sent each time when portAdminState is changed from/to mgt(4) value.
| |||||||||||||
| !alarmDisabledState | 1.3.6.1.4.1.2544.1.14.0.17 | ||||||||||||
notification · current This trap is sent each time when portAdminState is changed from/to dsbld(6) value.
| |||||||||||||
| !stateChangedTrap | 1.3.6.1.4.1.2544.1.14.0.18 | ||||||||||||
notification · current This trap is sent when an entity state is changed (OperState or AdminState). Additionally this trap will contain changed object: portOperState or portAdminState
| |||||||||||||
| !objectChangedTrap | 1.3.6.1.4.1.2544.1.14.0.19 | ||||||||||||
notification · current This trap is sent when an object such as alarm severity or threshold is changed Additionally this trap will contain changed object, portAidString, aidString, if relevant
| |||||||||||||
| !trapsinkCreatedTrap | 1.3.6.1.4.1.2544.1.14.0.20 | ||||||||||||
notification · current This trap is sent every time an new entry is added to the trapsinkTable or ipv6TrapsinkTable or dnsTrapsinkTable | |||||||||||||
| !trapsinkDeletedTrap | 1.3.6.1.4.1.2544.1.14.0.21 | ||||||||||||
notification · current This trap is sent every time an new entry is removed from the trapsinkTable or ipv6TrapsinkTable or dnsTrapsinkTable | |||||||||||||
| !transient15MinMeasCollected | 1.3.6.1.4.1.2544.1.14.0.22 | ||||||||||||
notification · current This trap is every time when all the measurement data for all the port are collected for selected period | |||||||||||||
| !transient1DayMeasCollected | 1.3.6.1.4.1.2544.1.14.0.23 | ||||||||||||
notification · current This trap is every time when all the measurement data for all the port are collected for selected period | |||||||||||||
| !transientFpStarted | 1.3.6.1.4.1.2544.1.14.0.24 | ||||||||||||
notification · current This trap is sent when fingerprint monitoring has started
| |||||||||||||
| !transientFpCompleted | 1.3.6.1.4.1.2544.1.14.0.25 | ||||||||||||
notification · current This trap is sent when fingerprint monitoring has completed with success
| |||||||||||||
| !transientFpFailed | 1.3.6.1.4.1.2544.1.14.0.26 | ||||||||||||
notification · current This trap is sent when fingerprint monitoring has ended with failure
| |||||||||||||
| !transientSwMgmtActionStarted | 1.3.6.1.4.1.2544.1.14.0.27 | ||||||||||||
notification · current This trap is sent when any action related with Software Management is initiated. In case of file-transfer related operations it will contain softwareMgmtFileName varbind.
| |||||||||||||
| !transientSwMgmtActionCompleted | 1.3.6.1.4.1.2544.1.14.0.28 | ||||||||||||
notification · current This trap is sent when any action related with Software Management is successfully completed. In case of file-transfer related operations it will contain softwareMgmtFileName varbind.
| |||||||||||||
| !transientSwMgmtActionFailed | 1.3.6.1.4.1.2544.1.14.0.29 | ||||||||||||
notification · current This trap is sent when any action related with Software Management failed. In case of file-transfer related operations it will contain softwareMgmtFileName varbind. | |||||||||||||
| !transientDbMgmtActionStarted | 1.3.6.1.4.1.2544.1.14.0.30 | ||||||||||||
notification · current This trap is sent when any action related with Database Management is initiated. In case of file-transfer related operations it will contain additionally databaseMgmtFileName varbind.
| |||||||||||||
| !transientDbMgmtActionCompleted | 1.3.6.1.4.1.2544.1.14.0.31 | ||||||||||||
notification · current This trap is sent when any action related with Database Management is successfully completed. In case of file-transfer related operations it will contain additionally databaseMgmtFileName varbind.
| |||||||||||||
| !transientDbMgmtActionFailed | 1.3.6.1.4.1.2544.1.14.0.32 | ||||||||||||
notification · current This trap is sent when any action related with Database Management failed. In case of file-transfer related operations it will contain additionally databaseMgmtFileName varbind. | |||||||||||||
| !alarmNtpServerUnreachable | 1.3.6.1.4.1.2544.1.14.0.33 | ||||||||||||
notification · current Trap to be sent when NTP servers are unreachable. | |||||||||||||
| !transientFpSaved | 1.3.6.1.4.1.2544.1.14.0.34 | ||||||||||||
notification · current This trap is sent when a completed fingerprint measurement is saved as current fingerprint.
| |||||||||||||
| !transientMonStarted | 1.3.6.1.4.1.2544.1.14.0.35 | ||||||||||||
notification · current This trap is sent when monitoring of the particular port was enabled.
| |||||||||||||
| !transientMonStopped | 1.3.6.1.4.1.2544.1.14.0.36 | ||||||||||||
notification · current This trap is sent when monitoring of the particular port was disabled.
| |||||||||||||
| !transientOtdrMeasurementStarted | 1.3.6.1.4.1.2544.1.14.0.37 | ||||||||||||
notification · current This trap is sent when manual OTDR measurement was intitiated.
| |||||||||||||
| !transientOtdrMeasurementCompleted | 1.3.6.1.4.1.2544.1.14.0.38 | ||||||||||||
notification · current This trap is sent when manual OTDR measurement is completed.
| |||||||||||||
| !transientOtdrMeasurementFailed | 1.3.6.1.4.1.2544.1.14.0.39 | ||||||||||||
notification · current This trap is sent when manual OTDR measurement failed.
| |||||||||||||
| !transientOtdrMeasurementSaved | 1.3.6.1.4.1.2544.1.14.0.40 | ||||||||||||
notification · current This trap is sent when data of manual OTDR measurement was saved.
| |||||||||||||
| !transientFaStarted | 1.3.6.1.4.1.2544.1.14.0.41 | ||||||||||||
notification · current This trap is sent when fault analysis in initiated.
| |||||||||||||
| !transientFaCompleted | 1.3.6.1.4.1.2544.1.14.0.42 | ||||||||||||
notification · current This trap is sent when fault analysis is completed.
| |||||||||||||
| !transientFaFailed | 1.3.6.1.4.1.2544.1.14.0.43 | ||||||||||||
notification · current This trap is sent when fault analysis is completed.
| |||||||||||||
| !transientFaSaved | 1.3.6.1.4.1.2544.1.14.0.44 | ||||||||||||
notification · current This trap is sent when the data of a completed fault analysis was saved. Which FaultPos objects are present is determined by the type AutoFa or (manual)Fa , CorrectedFaultPos is only contained when it exists.
| |||||||||||||
| !transientInternalError | 1.3.6.1.4.1.2544.1.14.0.45 | ||||||||||||
notification · current This trap is sent when some critical error happened which affects monitoring capabilities
| |||||||||||||
| !alarmRebootRunning | 1.3.6.1.4.1.2544.1.14.0.46 | ||||||||||||
notification · current This trap is to inform user that rebooting of system started
| |||||||||||||
| !alarmWarmupRunning | 1.3.6.1.4.1.2544.1.14.0.47 | ||||||||||||
notification · current This trap is sent when to inform a user about starting/finishing warming up process.
| |||||||||||||
| !alarmBadSysStat | 1.3.6.1.4.1.2544.1.14.0.48 | ||||||||||||
notification · current This trap is sent when some critical error happened due to hardware failure.
| |||||||||||||
| !alarmWrongFWVersion | 1.3.6.1.4.1.2544.1.14.0.49 | ||||||||||||
notification · current This trap is sent when alarm informing about the fact that firmware version is not up to date is raised/cleared. Not used on 16ALM-1650D.
| |||||||||||||
| !alarmMonProcNotRunning | 1.3.6.1.4.1.2544.1.14.0.50 | ||||||||||||
notification · current This trap is sent when some critical error happened which affects monitoring capabilities of the unit.
| |||||||||||||
| !transientFaDeleted | 1.3.6.1.4.1.2544.1.14.0.51 | ||||||||||||
notification · current This trap is sent when fault analysis was deleted.
| |||||||||||||
| !transientOtdrMeasurementDeleted | 1.3.6.1.4.1.2544.1.14.0.52 | ||||||||||||
notification · current This trap is sent when manual OTDR measurement was deleted.
| |||||||||||||
| !transientOtdrTraceMgmtActionStarted | 1.3.6.1.4.1.2544.1.14.0.53 | ||||||||||||
notification · current This trap is sent when any action related with OTDR Trace Management is initiated. | |||||||||||||
| !transientOtdrTraceMgmtActionCompleted | 1.3.6.1.4.1.2544.1.14.0.54 | ||||||||||||
notification · current This trap is sent when any action related with OTDR Trace Management is successfully completed. | |||||||||||||
| !transientOtdrTraceMgmtActionFailed | 1.3.6.1.4.1.2544.1.14.0.55 | ||||||||||||
notification · current This trap is sent when any action related with OTDR Trace Management failed. | |||||||||||||
| !alarmAlmPackageMismatch | 1.3.6.1.4.1.2544.1.14.0.56 | ||||||||||||
notification · current This trap is sent when softwareVersion and expectedSoftwareVersion values do not match and expectedSoftwareVersion value is not empty and operationMode is set to 'standalone'.
| |||||||||||||
| !alarmEmailNotifyThresCrossedFast | 1.3.6.1.4.1.2544.1.14.0.57 | ||||||||||||
notification · current This trap is sent if the absolute value of measurementLossDevFast exceeded portThresDeviationFast threshold and the corresponding automatic fault analysis measurement has been completed. alarmEmailNotifyCorrectedFaultPos is only contained when it exists.
| |||||||||||||
| !alarmEmailNotifyThresCrossedMedium | 1.3.6.1.4.1.2544.1.14.0.58 | ||||||||||||
notification · current This trap is sent if the absolute value of measurementLossDevMedium exceeded portThresDeviationMedium threshold and the corresponding automatic fault analysis measurement has been completed. alarmEmailNotifyCorrectedFaultPos is only contained when it exists. This alarm is not supported any longer and thus it will never be raised.
| |||||||||||||
| !alarmEmailNotifyThresCrossedSlow | 1.3.6.1.4.1.2544.1.14.0.59 | ||||||||||||
notification · current This trap is sent if the absolute value of measurementLossDevSlow exceeded portThresDeviationSlow threshold and the corresponding automatic fault analysis measurement has been completed. alarmEmailNotifyCorrectedFaultPos is only contained when it exists. This alarm is not supported any longer and thus it will never be raised.
| |||||||||||||
| !alarmEmailNotifyLinkBudgetExceeded | 1.3.6.1.4.1.2544.1.14.0.60 | ||||||||||||
notification · current This trap is sent if measurementLossLinkLoss value exceeded portThresBudget threshold and the corresponding automatic fault analysis measurement has been completed. alarmEmailNotifyCorrectedFaultPos is only contained when it exists.
| |||||||||||||
| !alarmEmailNotifyLinkBudgetNearlyExceeded | 1.3.6.1.4.1.2544.1.14.0.61 | ||||||||||||
notification · current This trap is sent if measurementLossLinkLoss value exceeded portThresCloseToBudget threshold and the corresponding automatic fault analysis measurement has been completed. alarmEmailNotifyCorrectedFaultPos is only contained when it exists.
| |||||||||||||
| !authenticationNotification | 1.3.6.1.4.1.2544.1.14.0.62 | ||||||||||||
notification · current This trap is sent when authentication event happens. | |||||||||||||
| !authenticationNotificationSummary | 1.3.6.1.4.1.2544.1.14.0.63 | ||||||||||||
notification · current This trap is sent when authentication event happens more often than 5 times within 10 seconds. | |||||||||||||
| !monitorPointCreated | 1.3.6.1.4.1.2544.1.14.0.64 | ||||||||||||
notification · current This trap is sent when Monitor Point was created | |||||||||||||
| !monitorPointDeleted | 1.3.6.1.4.1.2544.1.14.0.65 | ||||||||||||
notification · current This trap is sent when Monitor Point was deleted | |||||||||||||
| !alarmLossDeviationHigh | 1.3.6.1.4.1.2544.1.14.0.66 | ||||||||||||
notification · current This trap is sent if difference between monitorPointLossCurrentLoss and monitorPointLossFpLoss exceeded portMonitorThresDeviation. | |||||||||||||
| !alarmLossHigh | 1.3.6.1.4.1.2544.1.14.0.67 | ||||||||||||
notification · current This trap is sent if monitorPointLossCurrentLoss value exceeded portMonitorThresLossBudget. | |||||||||||||
| !alarmRootLinkFault | 1.3.6.1.4.1.2544.1.14.0.68 | ||||||||||||
notification · current PON: This trap is sent if alarmLossHigh or alarmLossDeviationHigh is present for all Monitor Points. PES: This trap is sent if the Last Reflection changes. ADL: This trap is sent if a FaultPosition is before at least one corresponding addDropPoint.
| |||||||||||||
| !transientResetMeansStarted | 1.3.6.1.4.1.2544.1.14.0.69 | ||||||||||||
notification · current This trap is sent when reset mean value action has started
| |||||||||||||
| !transientResetMeansCompleted | 1.3.6.1.4.1.2544.1.14.0.70 | ||||||||||||
notification · current This trap is sent when reset mean value action has completed with success
| |||||||||||||
| !transientResetMeansFailed | 1.3.6.1.4.1.2544.1.14.0.71 | ||||||||||||
notification · current This trap is sent when reset mean value action has ended with failure
| |||||||||||||
| !alarmTrafficOutage | 1.3.6.1.4.1.2544.1.14.0.72 | ||||||||||||
notification · current This trap is sent when DWDM traffic on the specific port was not detected any longer
| |||||||||||||
| !userAdded | 1.3.6.1.4.1.2544.1.14.0.73 | ||||||||||||
notification · current This trap is sent when user was added | |||||||||||||
| !userDeleted | 1.3.6.1.4.1.2544.1.14.0.74 | ||||||||||||
notification · current This trap is sent when user was deleted | |||||||||||||
| !customizedFpEventCreated | 1.3.6.1.4.1.2544.1.14.0.75 | ||||||||||||
notification · current This trap is sent when a customized Fingerprint Event was created | |||||||||||||
| !customizedFpEventDeleted | 1.3.6.1.4.1.2544.1.14.0.76 | ||||||||||||
notification · current This trap is sent when a customized Fingerprint Event was deleted | |||||||||||||
| !transientExportMgmtActionStarted | 1.3.6.1.4.1.2544.1.14.0.77 | ||||||||||||
notification · current This trap is sent when any action related with Export Management is initiated. In case of file-transfer related operations it will contain additionally exportMgmtFileName varbind.
| |||||||||||||
| !transientExportMgmtActionCompleted | 1.3.6.1.4.1.2544.1.14.0.78 | ||||||||||||
notification · current This trap is sent when any action related with Export Management is successfully completed. In case of file-transfer related operations it will contain additionally exportMgmtFileName varbind.
| |||||||||||||
| !transientExportMgmtActionFailed | 1.3.6.1.4.1.2544.1.14.0.79 | ||||||||||||
notification · current This trap is sent when any action related with Export Management failed. In case of file-transfer related operations it will contain additionally exportMgmtFileName varbind. | |||||||||||||
| !alarmSensor1High | 1.3.6.1.4.1.2544.1.14.0.80 | ||||||||||||
notification · current This trap is sent if difference between monitorPointLossCurrentLoss and monitorPointLossFpLoss exceeded portSensor1Thres. | |||||||||||||
| !alarmSensor2High | 1.3.6.1.4.1.2544.1.14.0.81 | ||||||||||||
notification · current This trap is sent if difference between monitorPointLossCurrentLoss and monitorPointLossFpLoss exceeded portSensor2Thres. | |||||||||||||
| !alarmEmailNotifyRootLinkFault | 1.3.6.1.4.1.2544.1.14.0.82 | ||||||||||||
notification · current This trap is sent if alarmRootLinkFault is set and the corresponding automatic fault analysis measurement has been completed. alarmEmailNotifyCorrectedFaultPos is only contained when it exists.
| |||||||||||||
| !transientTimeChange | 1.3.6.1.4.1.2544.1.14.0.83 | ||||||||||||
notification · current This trap is sent if a time step occured (manually or ntp) | |||||||||||||
| !alarmTopologyChanged | 1.3.6.1.4.1.2544.1.14.0.84 | ||||||||||||
notification · current This trap is sent if the Link Topology has changed
| |||||||||||||
| !alarmEmailNotifyLossDeviationHigh | 1.3.6.1.4.1.2544.1.14.0.85 | ||||||||||||
notification · current This trap is sent if difference between monitorPointLossCurrentLoss and monitorPointLossFpLoss exceeded portMonitorThresDeviation and the corresponding automatic fault analysis measurement has been completed.
| |||||||||||||
| !alarmEmailNotifyLossHigh | 1.3.6.1.4.1.2544.1.14.0.86 | ||||||||||||
notification · current This trap is sent if monitorPointLossCurrentLoss value exceeded portMonitorThresLossBudget and the corresponding automatic fault analysis measurement has been completed.
| |||||||||||||
| !alarmEmailNotifySensor1High | 1.3.6.1.4.1.2544.1.14.0.87 | ||||||||||||
notification · current This trap is sent if difference between monitorPointLossCurrentLoss and monitorPointLossFpLoss exceeded portSensor1Thres and the corresponding automatic fault analysis measurement has been completed.
| |||||||||||||
| !alarmEmailNotifySensor2High | 1.3.6.1.4.1.2544.1.14.0.88 | ||||||||||||
notification · current This trap is sent if difference between monitorPointLossCurrentLoss and monitorPointLossFpLoss exceeded portSensor2Thres and the corresponding automatic fault analysis measurement has been completed.
| |||||||||||||
| !alarmEmulationMode | 1.3.6.1.4.1.2544.1.14.0.89 | ||||||||||||
notification · current This trap is sent when the unit is switched to emulationmode.
| |||||||||||||
| !transientFiberIdentifierStarted | 1.3.6.1.4.1.2544.1.14.0.90 | ||||||||||||
notification · current This trap is sent when Fiber Identification has started.
| |||||||||||||
| !transientFiberIdentifierCompleted | 1.3.6.1.4.1.2544.1.14.0.91 | ||||||||||||
notification · current This trap is sent when Fiber Identification has completed.
| |||||||||||||
| !transientFiberIdentifierFailed | 1.3.6.1.4.1.2544.1.14.0.92 | ||||||||||||
notification · current This trap is sent when Fiber Identification has failed.
| |||||||||||||
| !transientPkiCertRequestStarted | 1.3.6.1.4.1.2544.1.14.0.93 | ||||||||||||
notification · current This trap is sent when Pki Certificate Request has started.
| |||||||||||||
| !transientPkiCertRequestCompleted | 1.3.6.1.4.1.2544.1.14.0.94 | ||||||||||||
notification · current This trap is sent when Pki Certificate Request has completed.
| |||||||||||||
| !transientPkiCertRequestFailed | 1.3.6.1.4.1.2544.1.14.0.95 | ||||||||||||
notification · current This trap is sent when Pki Certificate Request has failed.
| |||||||||||||
| !alarmCertExceeded | 1.3.6.1.4.1.2544.1.14.0.96 | ||||||||||||
notification · current This trap is sent when a Certificate has exceeded its Validity Period.
| |||||||||||||
| !alarmCertNearlyExceeded | 1.3.6.1.4.1.2544.1.14.0.97 | ||||||||||||
notification · current This trap is sent when a Certificate soon will exceed its Validity Period.
| |||||||||||||
| !transientLinkChanged | 1.3.6.1.4.1.2544.1.14.0.98 | ||||||||||||
notification · current This trap is sent when an Add-Drop Link Layout has changed. | |||||||||||||
| !alarmAddDropLinkLossHigh | 1.3.6.1.4.1.2544.1.14.0.99 | ||||||||||||
notification · current This trap is sent if difference between monitorPointLossCurrentLoss and monitorPointLossFpLoss exceeded portThresAddDropHigh. | |||||||||||||
| !alarmAddDropLinkLossDev | 1.3.6.1.4.1.2544.1.14.0.100 | ||||||||||||
notification · current This trap is sent if difference between monitorPointLossCurrentLoss and monitorPointLossFpLoss exceeded portThresAddDropDeviation. | |||||||||||||
| !alarmEmailNotifyAddDropLinkLossHigh | 1.3.6.1.4.1.2544.1.14.0.101 | ||||||||||||
notification · current This trap is sent if difference between monitorPointLossCurrentLoss and monitorPointLossFpLoss exceeded portThresAddDropHigh and the corresponding automatic fault analysis measurement has been completed.
| |||||||||||||
| !alarmEmailNotifyAddDropLinkLossDev | 1.3.6.1.4.1.2544.1.14.0.102 | ||||||||||||
notification · current This trap is sent if difference between monitorPointLossCurrentLoss and monitorPointLossFpLoss exceeded portThresAddDropDeviation and the corresponding automatic fault analysis measurement has been completed.
| |||||||||||||
| !segmentCreated | 1.3.6.1.4.1.2544.1.14.0.103 | ||||||||||||
notification · current This trap is sent when a Segment was created. | |||||||||||||
| !segmentDeleted | 1.3.6.1.4.1.2544.1.14.0.104 | ||||||||||||
notification · current This trap is sent when a Segment was deleted. | |||||||||||||
| !alarmEquipmentRemoved | 1.3.6.1.4.1.2544.1.14.0.105 | ||||||||||||
| !alarmEquipmentFault | 1.3.6.1.4.1.2544.1.14.0.106 | ||||||||||||
notification · current This trap is sent if the Equipment is faulty | |||||||||||||
| !alarmAttenuationHigh | 1.3.6.1.4.1.2544.1.14.0.107 | ||||||||||||
notification · current This trap is sent if the Optical Connection from this Port to its extender has a too high loss
| |||||||||||||
| !internalExtensionChannelCreated | 1.3.6.1.4.1.2544.1.14.0.108 | ||||||||||||
notification · current This trap is sent when a internalExtensionChannel including the correspondig set of Ports was created, with first and last aidString. | |||||||||||||
| !internalExtensionChannelDeleted | 1.3.6.1.4.1.2544.1.14.0.109 | ||||||||||||
notification · current This trap is sent when a internalExtensionChannel including the correspondig set of Ports was deleted, with first and last aidString. | |||||||||||||
| !portExtenderCreated | 1.3.6.1.4.1.2544.1.14.0.110 | ||||||||||||
notification · current This trap is sent when a Portextender was created. | |||||||||||||
| !portExtenderDeleted | 1.3.6.1.4.1.2544.1.14.0.111 | ||||||||||||
notification · current This trap is sent when a Portextender was deleted. | |||||||||||||
| Nalarm | 1.3.6.1.4.1.2544.1.14.1 | ||||||||||||
| TalarmTable | 1.3.6.1.4.1.2544.1.14.1.1 | NA | |||||||||||
| RalarmEntry | 1.3.6.1.4.1.2544.1.14.1.1.1 | NA | |||||||||||
row · not-accessible · current
| |||||||||||||
| CalarmSource | 1.3.6.1.4.1.2544.1.14.1.1.1.1 | Integer32 (0..899000) | NA | ||||||||||
column · Integer32 (0..899000) · not-accessible · current Equals portId of the concerned port if the alarm is port-specific. Zero otherwise. | |||||||||||||
| CalarmType | 1.3.6.1.4.1.2544.1.14.1.1.1.2 | Fsp3000almAlarmListType | NA | ||||||||||
column · Fsp3000almAlarmListType · not-accessible · current Type of alarm. | |||||||||||||
| CalarmSeverity | 1.3.6.1.4.1.2544.1.14.1.1.1.3 | TrapAlarmSeverity | RO | ||||||||||
column · TrapAlarmSeverity · read-only · current Value of severity. | |||||||||||||
| CalarmTimeStamp | 1.3.6.1.4.1.2544.1.14.1.1.1.4 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current Timestamp of alarm. | |||||||||||||
| TalarmSeverityTable | 1.3.6.1.4.1.2544.1.14.1.2 | NA | |||||||||||
| RalarmSeverityEntry | 1.3.6.1.4.1.2544.1.14.1.2.1 | NA | |||||||||||
row · not-accessible · current
| |||||||||||||
| CalarmSeverityType | 1.3.6.1.4.1.2544.1.14.1.2.1.2 | Fsp3000almAlarmListType | NA | ||||||||||
column · Fsp3000almAlarmListType · not-accessible · current Type of severity. | |||||||||||||
| CalarmSeverityValue | 1.3.6.1.4.1.2544.1.14.1.2.1.3 | TrapAlarmSeverity | RW | ||||||||||
column · TrapAlarmSeverity · read-write · current Value of severity. | |||||||||||||
| TalarmEmailNotifyTable | 1.3.6.1.4.1.2544.1.14.1.3 | NA | |||||||||||
| RalarmEmailNotifyEntry | 1.3.6.1.4.1.2544.1.14.1.3.1 | NA | |||||||||||
row · not-accessible · current | |||||||||||||
| CalarmEmailNotifyType | 1.3.6.1.4.1.2544.1.14.1.3.1.1 | Fsp3000almAlarmListType | NA | ||||||||||
column · Fsp3000almAlarmListType · not-accessible · current Type of alarm. | |||||||||||||
| CalarmEmailNotifyExternalId | 1.3.6.1.4.1.2544.1.14.1.3.1.2 | DisplayString (SIZE (0..64)) | RO | ||||||||||
column · DisplayString (SIZE (0..64)) · read-only · current ExternalId of port. | |||||||||||||
| CalarmEmailNotifyId | 1.3.6.1.4.1.2544.1.14.1.3.1.3 | DisplayString (SIZE (0..16)) | RO | ||||||||||
column · DisplayString (SIZE (0..16)) · read-only · current Id of alarm. | |||||||||||||
| CalarmEmailNotifySeverity | 1.3.6.1.4.1.2544.1.14.1.3.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Value of severity.
| |||||||||||||
| CalarmEmailNotifyTimeStamp | 1.3.6.1.4.1.2544.1.14.1.3.1.5 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current Timestamp of alarm creation. | |||||||||||||
| CalarmEmailNotifyFaultPosition | 1.3.6.1.4.1.2544.1.14.1.3.1.6 | DisplayString (SIZE (0..8)) | RO | ||||||||||
column · DisplayString (SIZE (0..8)) · read-only · current Fault position in kilometers. | |||||||||||||
| CalarmEmailNotifyFaultType | 1.3.6.1.4.1.2544.1.14.1.3.1.7 | DisplayString (SIZE (0..64)) | AN | ||||||||||
column · DisplayString (SIZE (0..64)) · accessible-for-notify · current Fault type of alarm. | |||||||||||||
| CalarmEmailNotifyState | 1.3.6.1.4.1.2544.1.14.1.3.1.8 | DisplayString (SIZE (0..64)) | AN | ||||||||||
column · DisplayString (SIZE (0..64)) · accessible-for-notify · current State of alarm. | |||||||||||||
| CalarmEmailNotifyEvent | 1.3.6.1.4.1.2544.1.14.1.3.1.9 | DisplayString (SIZE (0..64)) | AN | ||||||||||
column · DisplayString (SIZE (0..64)) · accessible-for-notify · current Alarm event. | |||||||||||||
| CalarmEmailNotifyEventTimeStamp | 1.3.6.1.4.1.2544.1.14.1.3.1.10 | DateAndTime | AN | ||||||||||
column · DateAndTime · accessible-for-notify · current Timestamp of alarm event. | |||||||||||||
| CalarmEmailNotifyFaultAnalysisReference | 1.3.6.1.4.1.2544.1.14.1.3.1.11 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Fault analysis reference number. | |||||||||||||
| CalarmEmailNotifyCorrectedFaultPos | 1.3.6.1.4.1.2544.1.14.1.3.1.12 | DisplayString (SIZE (0..8)) | RO | ||||||||||
column · DisplayString (SIZE (0..8)) · read-only · current Fault analysis corrected position. | |||||||||||||
| CalarmEmailNotifyFaultPosLatitude | 1.3.6.1.4.1.2544.1.14.1.3.1.13 | DisplayString (SIZE (0..10)) | RO | ||||||||||
column · DisplayString (SIZE (0..10)) · read-only · current The latitude of the fault position in decimal degrees (-90 to 90 degree). | |||||||||||||
| CalarmEmailNotifyFaultPosLongitude | 1.3.6.1.4.1.2544.1.14.1.3.1.14 | DisplayString (SIZE (0..10)) | RO | ||||||||||
column · DisplayString (SIZE (0..10)) · read-only · current The longitude of the fault position in decimal degrees (-180 to 180 degree). | |||||||||||||
| TalarmDescriptionTable | 1.3.6.1.4.1.2544.1.14.1.4 | NA | |||||||||||
| RalarmDescriptionEntry | 1.3.6.1.4.1.2544.1.14.1.4.1 | NA | |||||||||||
row · not-accessible · current
| |||||||||||||
| CalarmDescriptionName | 1.3.6.1.4.1.2544.1.14.1.4.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current Name of alarm. | |||||||||||||
| SlossAlarmsMasking | 1.3.6.1.4.1.2544.1.14.1.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current 1 disable / 2 enable Alarmmasking LinkLoss>LinkLossNearly>Fast>Medium>Slow this attribute is deprecated, it can be set but it has no effect.
| |||||||||||||
| Ndevice | 1.3.6.1.4.1.2544.1.14.2 | ||||||||||||
| Nshelf | 1.3.6.1.4.1.2544.1.14.2.1 | ||||||||||||
| SshelfUnitName | 1.3.6.1.4.1.2544.1.14.2.1.1 | SnmpAdminString | RO | ||||||||||
scalar · SnmpAdminString · read-only · current Official Equipment Name | |||||||||||||
| SfirmwarePackageRev | 1.3.6.1.4.1.2544.1.14.2.1.2 | SnmpAdminString | RO | 2.70 | |||||||||
scalar · SnmpAdminString · read-only · current Firmware Package Revision Number Example values from LibreNMS test devices
| |||||||||||||
| ShardwareRev | 1.3.6.1.4.1.2544.1.14.2.1.3 | SnmpAdminString | RO | ||||||||||
scalar · SnmpAdminString · read-only · current Equipment Revision Number | |||||||||||||
| SfpgaRev | 1.3.6.1.4.1.2544.1.14.2.1.4 | SnmpAdminString | RO | ||||||||||
scalar · SnmpAdminString · read-only · current The active FPGA version on the device | |||||||||||||
| SserialNumber | 1.3.6.1.4.1.2544.1.14.2.1.5 | SnmpAdminString | RO | AA00000000000 | |||||||||
scalar · SnmpAdminString · read-only · current Equipment Serial Number Example values from LibreNMS test devices
| |||||||||||||
| SpartNumber | 1.3.6.1.4.1.2544.1.14.2.1.6 | SnmpAdminString | RO | ||||||||||
scalar · SnmpAdminString · read-only · current Part Number | |||||||||||||
| ScleiCode | 1.3.6.1.4.1.2544.1.14.2.1.7 | SnmpAdminString | RO | ||||||||||
scalar · SnmpAdminString · read-only · current Common Language Equipment Identifier | |||||||||||||
| SvendorId | 1.3.6.1.4.1.2544.1.14.2.1.8 | SnmpAdminString | RO | ||||||||||
scalar · SnmpAdminString · read-only · current OEM Vendor Code | |||||||||||||
| SinventoryType | 1.3.6.1.4.1.2544.1.14.2.1.9 | SnmpAdminString | RO | 16ALM-1650D | |||||||||
scalar · SnmpAdminString · read-only · current Type of the physical entity Example values from LibreNMS test devices
| |||||||||||||
| SuniversalSerialIdent | 1.3.6.1.4.1.2544.1.14.2.1.10 | SnmpAdminString | RO | ||||||||||
scalar · SnmpAdminString · read-only · current Universal Serial Identifier | |||||||||||||
| StempCPU | 1.3.6.1.4.1.2544.1.14.2.1.11 | Integer32 | RO | 514 | |||||||||
scalar · Integer32 · read-only · current Current CPU temperature (in 0.1 degree Celsius).
Example values from LibreNMS test devices
| |||||||||||||
| SthresholdMaxTempCPU | 1.3.6.1.4.1.2544.1.14.2.1.12 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Upper threshold for CPU temperature. If tempCPU is higher than threshold, the system will send a trap.
| |||||||||||||
| StempBoard1 | 1.3.6.1.4.1.2544.1.14.2.1.13 | Integer32 | RO | 423 | |||||||||
scalar · Integer32 · read-only · current Current temperature of the management board (in 0.1 degree Celsius). Not available on 16ALM-1650D.
Example values from LibreNMS test devices
| |||||||||||||
| SthresholdMaxTempBoard1 | 1.3.6.1.4.1.2544.1.14.2.1.14 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Upper threshold for board temperature. If tempBoard is higher than threshold, the system will send a trap. Not available on 16ALM-1650D.
| |||||||||||||
| StempBoard2 | 1.3.6.1.4.1.2544.1.14.2.1.15 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current
| |||||||||||||
| SthresholdMinTempBoard2 | 1.3.6.1.4.1.2544.1.14.2.1.16 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current
| |||||||||||||
| SthresholdMaxTempBoard2 | 1.3.6.1.4.1.2544.1.14.2.1.17 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current
| |||||||||||||
| StempLaser | 1.3.6.1.4.1.2544.1.14.2.1.18 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Not available on 16ALM-1650D.
| |||||||||||||
| SthresholdMinTempLaser | 1.3.6.1.4.1.2544.1.14.2.1.19 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Not available on 16ALM-1650D.
| |||||||||||||
| SthresholdMaxTempLaser | 1.3.6.1.4.1.2544.1.14.2.1.20 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current Not available on 16ALM-1650D.
| |||||||||||||
| SaidString | 1.3.6.1.4.1.2544.1.14.2.1.21 | OCTET STRING (SIZE (0..16)) | RO | ||||||||||
scalar · OCTET STRING (SIZE (0..16)) · read-only · current Name of the device | |||||||||||||
| SshelfName | 1.3.6.1.4.1.2544.1.14.2.1.22 | DisplayString (SIZE (0..64)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..64)) · read-write · current Name of the device | |||||||||||||
| TportTable | 1.3.6.1.4.1.2544.1.14.2.2 | NA | |||||||||||
table · not-accessible · current Table of optical ports. | |||||||||||||
| RportEntry | 1.3.6.1.4.1.2544.1.14.2.2.1 | NA | |||||||||||
row · not-accessible · current
| |||||||||||||
| CportId | 1.3.6.1.4.1.2544.1.14.2.2.1.1 | Integer32 (1..898) | NA | ||||||||||
| CportAdminState | 1.3.6.1.4.1.2544.1.14.2.2.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Administrative State of the port. Setting to mgt disables the service. It is, however, manadatory to set state to mgt to perform other measurement affecting actions (e.g. changing thresholds values).
| |||||||||||||
| CportOperState | 1.3.6.1.4.1.2544.1.14.2.2.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Operational State of the port. The value of the port is set to anr if the at least one of the following alarms are set on this port: alarmMonNotRunning, alarmFpMissing.
| |||||||||||||
| CportName | 1.3.6.1.4.1.2544.1.14.2.2.1.4 | DisplayString (SIZE (0..128)) | RW | ||||||||||
column · DisplayString (SIZE (0..128)) · read-write · current Name of the link. | |||||||||||||
| CportAidString | 1.3.6.1.4.1.2544.1.14.2.2.1.5 | IdentityTranslation | RO | ||||||||||
| CportRemark | 1.3.6.1.4.1.2544.1.14.2.2.1.6 | DisplayString (SIZE (0..255)) | RW | ||||||||||
column · DisplayString (SIZE (0..255)) · read-write · current Port remark. | |||||||||||||
| CportFingerprintMode | 1.3.6.1.4.1.2544.1.14.2.2.1.7 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Type of the current Fingerprint.
| |||||||||||||
| CportPriority | 1.3.6.1.4.1.2544.1.14.2.2.1.8 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Priority of the Port.
| |||||||||||||
| CportGisConfigured | 1.3.6.1.4.1.2544.1.14.2.2.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This variable is set to 'yes' when a route is configured in the internal ALM GIS for this port. Can be set to 'no' to delete the route
| |||||||||||||
| CportConnectedInternalChannel | 1.3.6.1.4.1.2544.1.14.2.2.1.10 | IdentityTranslation | RW | ||||||||||
column · IdentityTranslation · read-write · current Current mapping, i.e. internal optical port on Port Extender, which the port is connected to, 'empty' if none | |||||||||||||
| CportPmData | 1.3.6.1.4.1.2544.1.14.2.2.1.11 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This value needs to be set to 2 to enable perfomance monitor data collection, there is a maximum amount of ports, which can be selected.
| |||||||||||||
| NmonitoringItems | 1.3.6.1.4.1.2544.1.14.2.3 | ||||||||||||
| TfeederLengthTable | 1.3.6.1.4.1.2544.1.14.2.3.1 | NA | |||||||||||
| RfeederLengthEntry | 1.3.6.1.4.1.2544.1.14.2.3.1.1 | NA | |||||||||||
row · not-accessible · current
| |||||||||||||
| CfeederLength | 1.3.6.1.4.1.2544.1.14.2.3.1.1.1 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current Distance in decimeter up to the splitter.
| |||||||||||||
| TmonitorPointTable | 1.3.6.1.4.1.2544.1.14.2.3.2 | NA | |||||||||||
table · not-accessible · current Table of optical ports. | |||||||||||||
| RmonitorPointEntry | 1.3.6.1.4.1.2544.1.14.2.3.2.1 | NA | |||||||||||
| CmpId | 1.3.6.1.4.1.2544.1.14.2.3.2.1.1 | Integer32 (1..128) | NA | ||||||||||
| CmonitorPointPos | 1.3.6.1.4.1.2544.1.14.2.3.2.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Position of the Monitor Point in decimeter.
| |||||||||||||
| CmonitorPointState | 1.3.6.1.4.1.2544.1.14.2.3.2.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This variable is set to '1' when this Monitor Point is active. If this Monitor Point is inactive this variable is set to '0'.
| |||||||||||||
| CmonitorPointName | 1.3.6.1.4.1.2544.1.14.2.3.2.1.4 | DisplayString (SIZE (0..64)) | RW | ||||||||||
column · DisplayString (SIZE (0..64)) · read-write · current Name of the Monitor Point. | |||||||||||||
| CmonitorPointAidString | 1.3.6.1.4.1.2544.1.14.2.3.2.1.5 | IdentityTranslation | RO | ||||||||||
| CmonitorPointRemark | 1.3.6.1.4.1.2544.1.14.2.3.2.1.6 | DisplayString (SIZE (0..255)) | RW | ||||||||||
column · DisplayString (SIZE (0..255)) · read-write · current Remark of the Monitor Point. | |||||||||||||
| CmonitorPointExternalId | 1.3.6.1.4.1.2544.1.14.2.3.2.1.7 | DisplayString (SIZE (0..64)) | RW | ||||||||||
column · DisplayString (SIZE (0..64)) · read-write · current The externalId of the Monitor Point. | |||||||||||||
| TextShelfTable | 1.3.6.1.4.1.2544.1.14.2.4 | NA | |||||||||||
table · not-accessible · current Table of external Shelves aka Port Extenders. | |||||||||||||
| RextShelfEntry | 1.3.6.1.4.1.2544.1.14.2.4.1 | NA | |||||||||||
row · not-accessible · current
| |||||||||||||
| CextShelfNo | 1.3.6.1.4.1.2544.1.14.2.4.1.1 | Integer32 (1..8) | NA | ||||||||||
column · Integer32 (1..8) · not-accessible · current Number of external shelf | |||||||||||||
| CextShelfRowStatus | 1.3.6.1.4.1.2544.1.14.2.4.1.2 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The status of this conceptual row. To create a row in this table, set this object to createAndGo(4). To remove a row, set this object to destroy(6). | |||||||||||||
| CextShelfType | 1.3.6.1.4.1.2544.1.14.2.4.1.3 | SnmpAdminString | RC | ||||||||||
column · SnmpAdminString · read-create · current Type of the external shelf, i.e. ALM-EXT-16MPO24-8LA or ALM-EXT-96LA-2LA | |||||||||||||
| CextShelfAidString | 1.3.6.1.4.1.2544.1.14.2.4.1.4 | IdentityTranslation | RO | ||||||||||
column · IdentityTranslation · read-only · current AID: SHEXT-1 .. SHEXT-8 | |||||||||||||
| CextShelfInternalId | 1.3.6.1.4.1.2544.1.14.2.4.1.5 | Integer32 (91..98) | RO | ||||||||||
column · Integer32 (91..98) · read-only · current 91, ..., 98 the internal ID used for the alarm table | |||||||||||||
| CextShelfNrInternalPorts | 1.3.6.1.4.1.2544.1.14.2.4.1.6 | Integer32 (2 | 8) | RO | ||||||||||
column · Integer32 (2 | 8) · read-only · current Number of internal optical ports | |||||||||||||
| CextShelfNrMonitorPorts | 1.3.6.1.4.1.2544.1.14.2.4.1.7 | Integer32 (96 | 384) | RO | ||||||||||
column · Integer32 (96 | 384) · read-only · current Number of Monitor Ports on the Port Extender | |||||||||||||
| CextShelfName | 1.3.6.1.4.1.2544.1.14.2.4.1.8 | DisplayString (SIZE (0..64)) | RC | ||||||||||
column · DisplayString (SIZE (0..64)) · read-create · current Name of the Port Extender | |||||||||||||
| CextShelfRemark | 1.3.6.1.4.1.2544.1.14.2.4.1.9 | DisplayString (SIZE (0..255)) | RC | ||||||||||
column · DisplayString (SIZE (0..255)) · read-create · current Remark of the Port Extender | |||||||||||||
| TentityPortTable | 1.3.6.1.4.1.2544.1.14.2.5 | NA | |||||||||||
table · not-accessible · current Table of Monitor Ports | |||||||||||||
| RentityPortEntry | 1.3.6.1.4.1.2544.1.14.2.5.1 | NA | |||||||||||
row · not-accessible · current | |||||||||||||
| CentityPortInternalNo | 1.3.6.1.4.1.2544.1.14.2.5.1.1 | Integer32 (0 | 65..72) | NA | ||||||||||
column · Integer32 (0 | 65..72) · not-accessible · current Number of the internal optical port, A .. H as ASCII decimal code 65, .., 72; 0 for the Monitor Ports on the ALM itself | |||||||||||||
| CentityPortPortNo | 1.3.6.1.4.1.2544.1.14.2.5.1.2 | Integer32 (0..64) | NA | ||||||||||
column · Integer32 (0..64) · not-accessible · current Number of Monitor Port, 1 .. 16 on 16ALM, 1 .. 64 on 64ALM, 1 .. 48 on Port Extenders | |||||||||||||
| CentityPortAidString | 1.3.6.1.4.1.2544.1.14.2.5.1.3 | IdentityTranslation | RO | ||||||||||
column · IdentityTranslation · read-only · current AID: MCH-1-x for Monitor Ports on the ALM, MCH-Ex-X-y for Monitor Ports on Port Extenders, ICH-Ex-X for internal optical ports on Port Extenders | |||||||||||||
| CentityPortPortId | 1.3.6.1.4.1.2544.1.14.2.5.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Internal port ID: 1 .. 16|64 for Monitor Ports on ALM itself 100, 150, 200, ... for internal optical ports on Port Extender 101, ..., 148, 151, ..., 198, ........, 851, ..., 898 for Monitor Ports on Port Extender | |||||||||||||
| Nmeasurement | 1.3.6.1.4.1.2544.1.14.3 | ||||||||||||
| TmeasurementLossTable | 1.3.6.1.4.1.2544.1.14.3.1 | NA | |||||||||||
| RmeasurementLossEntry | 1.3.6.1.4.1.2544.1.14.3.1.1 | NA | |||||||||||
row · not-accessible · current
| |||||||||||||
| CmeasurementLossIndex | 1.3.6.1.4.1.2544.1.14.3.1.1.1 | Integer32 (1) | RO | ||||||||||
| CmeasurementLossLinkLoss | 1.3.6.1.4.1.2544.1.14.3.1.1.2 | Integer32 (0..420) | RO | ||||||||||
column · Integer32 (0..420) · read-only · current Link loss at termination in tenth of dB.
| |||||||||||||
| CmeasurementLossLinkFaultLoc | 1.3.6.1.4.1.2544.1.14.3.1.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Fault location in decimetres. If there is no current Fault Position the value is -1
| |||||||||||||
| CmeasurementLossLinkFaultLocRes | 1.3.6.1.4.1.2544.1.14.3.1.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Resolution of the fault location measurement in decimetres.
| |||||||||||||
| CmeasurementLossDevFast | 1.3.6.1.4.1.2544.1.14.3.1.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current
| |||||||||||||
| CmeasurementLossDevMedium | 1.3.6.1.4.1.2544.1.14.3.1.1.6 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current
| |||||||||||||
| CmeasurementLossDevSlow | 1.3.6.1.4.1.2544.1.14.3.1.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current
| |||||||||||||
| CmeasurementLossDataTimestamp | 1.3.6.1.4.1.2544.1.14.3.1.1.8 | DateAndTime | RO | ||||||||||
| ThistMeasLoss15MinTable | 1.3.6.1.4.1.2544.1.14.3.4 | NA | |||||||||||
| RhistMeasLoss15MinEntry | 1.3.6.1.4.1.2544.1.14.3.4.1 | NA | |||||||||||
| ChistMeasLoss15MinNumber | 1.3.6.1.4.1.2544.1.14.3.4.1.1 | Integer32 (1..96) | NA | ||||||||||
column · Integer32 (1..96) · not-accessible · current A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1. | |||||||||||||
| ChistMeasLoss15MinLow | 1.3.6.1.4.1.2544.1.14.3.4.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Lowest link loss
| |||||||||||||
| ChistMeasLoss15MinMean | 1.3.6.1.4.1.2544.1.14.3.4.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Mean link loss
| |||||||||||||
| ChistMeasLoss15MinHigh | 1.3.6.1.4.1.2544.1.14.3.4.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Highest link loss
| |||||||||||||
| ChistMeasLoss15MinValidFlag | 1.3.6.1.4.1.2544.1.14.3.4.1.5 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current Valid Flag | |||||||||||||
| ChistMeasLoss15MinTimeStamp | 1.3.6.1.4.1.2544.1.14.3.4.1.6 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current Timestamp | |||||||||||||
| ChistMeasLoss15MinLength | 1.3.6.1.4.1.2544.1.14.3.4.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Link legth
| |||||||||||||
| ChistMeasLoss15MinLossPerKmLow | 1.3.6.1.4.1.2544.1.14.3.4.1.8 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Lowest link loss per km
| |||||||||||||
| ChistMeasLoss15MinLossPerKmMean | 1.3.6.1.4.1.2544.1.14.3.4.1.9 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Mean link loss per km
| |||||||||||||
| ChistMeasLoss15MinLossPerKmHigh | 1.3.6.1.4.1.2544.1.14.3.4.1.10 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Highest link loss per km
| |||||||||||||
| ThistMeasLoss1DayTable | 1.3.6.1.4.1.2544.1.14.3.5 | NA | |||||||||||
| RhistMeasLoss1DayEntry | 1.3.6.1.4.1.2544.1.14.3.5.1 | NA | |||||||||||
| ChistMeasLoss1DayNumber | 1.3.6.1.4.1.2544.1.14.3.5.1.1 | Integer32 (1..31) | NA | ||||||||||
column · Integer32 (1..31) · not-accessible · current A number, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 1 day interval. | |||||||||||||
| ChistMeasLoss1DayLow | 1.3.6.1.4.1.2544.1.14.3.5.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Lowest link loss
| |||||||||||||
| ChistMeasLoss1DayMean | 1.3.6.1.4.1.2544.1.14.3.5.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Mean link loss
| |||||||||||||
| ChistMeasLoss1DayHigh | 1.3.6.1.4.1.2544.1.14.3.5.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Highest link loss
| |||||||||||||
| ChistMeasLoss1DayValidFlag | 1.3.6.1.4.1.2544.1.14.3.5.1.5 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current Valid Flag | |||||||||||||
| ChistMeasLoss1DayTimeStamp | 1.3.6.1.4.1.2544.1.14.3.5.1.6 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current Timestamp | |||||||||||||
| ChistMeasLoss1DayLength | 1.3.6.1.4.1.2544.1.14.3.5.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Link legth
| |||||||||||||
| ChistMeasLoss1DayLossPerKmLow | 1.3.6.1.4.1.2544.1.14.3.5.1.8 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Lowest link loss per km
| |||||||||||||
| ChistMeasLoss1DayLossPerKmMean | 1.3.6.1.4.1.2544.1.14.3.5.1.9 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Mean link loss per km
| |||||||||||||
| ChistMeasLoss1DayLossPerKmHigh | 1.3.6.1.4.1.2544.1.14.3.5.1.10 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Highest link loss per km
| |||||||||||||
| TportThresTable | 1.3.6.1.4.1.2544.1.14.3.6 | NA | |||||||||||
| RportThresEntry | 1.3.6.1.4.1.2544.1.14.3.6.1 | NA | |||||||||||
row · not-accessible · current
| |||||||||||||
| CportThresDeviationFast | 1.3.6.1.4.1.2544.1.14.3.6.1.2 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current portThresDeviationFast
| |||||||||||||
| CportThresDeviationMedium | 1.3.6.1.4.1.2544.1.14.3.6.1.3 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current portThresDeviationMedium This attribute is deprecated, it can be set but is has no effect.
| |||||||||||||
| CportThresDeviationSlow | 1.3.6.1.4.1.2544.1.14.3.6.1.4 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current portThresDeviationSlow This attribute is deprecated, it can be set but is has no effect.
| |||||||||||||
| CportThresBudget | 1.3.6.1.4.1.2544.1.14.3.6.1.5 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current portThresBudget
| |||||||||||||
| CportThresCloseToBudget | 1.3.6.1.4.1.2544.1.14.3.6.1.6 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current portThresCloseToBudget
| |||||||||||||
| CportMonitorThresLossBudget | 1.3.6.1.4.1.2544.1.14.3.6.1.7 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current portMonitorThresLossBudget
| |||||||||||||
| CportMonitorThresDeviation | 1.3.6.1.4.1.2544.1.14.3.6.1.8 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current portMonitorThresDeviation
| |||||||||||||
| CportSensor1Thres | 1.3.6.1.4.1.2544.1.14.3.6.1.9 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current portSensor1Thres
| |||||||||||||
| CportSensor2Thres | 1.3.6.1.4.1.2544.1.14.3.6.1.10 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current portSensor2Thres
| |||||||||||||
| CportAutoThresAdjustment | 1.3.6.1.4.1.2544.1.14.3.6.1.11 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current 1 disable / 2 enable automatic adjustment of ThresBudget/ThresCloseToBudget with the following margins
| |||||||||||||
| CportThresBudgetMargin | 1.3.6.1.4.1.2544.1.14.3.6.1.12 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current portThresBudgetMargin
| |||||||||||||
| CportThresCloseToBudgetMargin | 1.3.6.1.4.1.2544.1.14.3.6.1.13 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current portThresCloseToBudgetMargin
| |||||||||||||
| CportThresAddDropHigh | 1.3.6.1.4.1.2544.1.14.3.6.1.14 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current portThresAddDropHigh
| |||||||||||||
| CportThresAddDropDeviation | 1.3.6.1.4.1.2544.1.14.3.6.1.15 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current portThresAddDropDeviation
| |||||||||||||
| TportPeriodLossDevTable | 1.3.6.1.4.1.2544.1.14.3.7 | NA | |||||||||||
| RportPeriodLossDevEntry | 1.3.6.1.4.1.2544.1.14.3.7.1 | NA | |||||||||||
row · not-accessible · current
| |||||||||||||
| CportPeriodLossDevFast | 1.3.6.1.4.1.2544.1.14.3.7.1.1 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This attribute is deprecated it can be set but it has no effect.
| |||||||||||||
| CportPeriodLossDevMedium | 1.3.6.1.4.1.2544.1.14.3.7.1.2 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This attribute is deprecated it can be set but it has no effect.
| |||||||||||||
| CportPeriodLossDevSlow | 1.3.6.1.4.1.2544.1.14.3.7.1.3 | Integer32 | RW | ||||||||||
column · Integer32 · read-write · current This attribute is deprecated it can be set but it has no effect.
| |||||||||||||
| TmeasurementFpTable | 1.3.6.1.4.1.2544.1.14.3.8 | NA | |||||||||||
| RmeasurementFpEntry | 1.3.6.1.4.1.2544.1.14.3.8.1 | NA | |||||||||||
row · not-accessible · current
| |||||||||||||
| CmeasurementFpIndex | 1.3.6.1.4.1.2544.1.14.3.8.1.1 | Integer32 (1) | NA | ||||||||||
| CmeasurementFpRefractiveIndex | 1.3.6.1.4.1.2544.1.14.3.8.1.2 | Integer32 (1400000..1550000) | RO | ||||||||||
column · Integer32 (1400000..1550000) · read-only · current Refractive index multiplied by 1000000. | |||||||||||||
| CmeasurementFpExternalOffset | 1.3.6.1.4.1.2544.1.14.3.8.1.3 | Integer32 (0..100) | RO | ||||||||||
column · Integer32 (0..100) · read-only · current External offset length in meters.
| |||||||||||||
| CmeasurementFpCouplerLoss | 1.3.6.1.4.1.2544.1.14.3.8.1.4 | Integer32 (0..100) | RO | ||||||||||
column · Integer32 (0..100) · read-only · current Coupler loss in tenth of dB.
| |||||||||||||
| CmeasurementFpLinkLoss | 1.3.6.1.4.1.2544.1.14.3.8.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Link loss at reflector in tenth of dB.
| |||||||||||||
| CmeasurementFpLineEndPos | 1.3.6.1.4.1.2544.1.14.3.8.1.6 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Position of the reflector in decimetres.
| |||||||||||||
| CmeasurementFpDataTimestamp | 1.3.6.1.4.1.2544.1.14.3.8.1.7 | DateAndTime | RO | ||||||||||
| CmeasurementFpNumConnectors | 1.3.6.1.4.1.2544.1.14.3.8.1.8 | Integer32 (0..20 | -2147483648) | RO | ||||||||||
column · Integer32 (0..20 | -2147483648) · read-only · current Equals -2147483648 if loss guidance was not enabled during fingerprint creation. | |||||||||||||
| CmeasurementFpNumSplices | 1.3.6.1.4.1.2544.1.14.3.8.1.9 | Integer32 (0..20 | -2147483648) | RO | ||||||||||
column · Integer32 (0..20 | -2147483648) · read-only · current Equals -2147483648 if loss guidance was not enabled during fingerprint creation. | |||||||||||||
| CmeasurementFpMaxLaserPower | 1.3.6.1.4.1.2544.1.14.3.8.1.10 | Integer32 (0..1000) | RO | ||||||||||
column · Integer32 (0..1000) · read-only · current Maximal laser power in 0.01dBm. Only available on 16ALM-1650D.
| |||||||||||||
| CmeasurementFpFastMode | 1.3.6.1.4.1.2544.1.14.3.8.1.11 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current If this variable is 'enabled' faster OTDR measurements are activated with less accuracy.
| |||||||||||||
| CmeasurementFpMonitoringMode | 1.3.6.1.4.1.2544.1.14.3.8.1.12 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Measurement method for monitoring.
| |||||||||||||
| CmeasurementFpTrafficDetected | 1.3.6.1.4.1.2544.1.14.3.8.1.13 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This object is available if traffic check is enabled.
| |||||||||||||
| TmeasurementFaTable | 1.3.6.1.4.1.2544.1.14.3.9 | NA | |||||||||||
| RmeasurementFaEntry | 1.3.6.1.4.1.2544.1.14.3.9.1 | NA | |||||||||||
row · not-accessible · current
| |||||||||||||
| CmeasurementFaIndex | 1.3.6.1.4.1.2544.1.14.3.9.1.1 | Integer32 (1) | NA | ||||||||||
| CmeasurementFaLinkLoss | 1.3.6.1.4.1.2544.1.14.3.9.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Link loss at reflector in tenth of dB.
| |||||||||||||
| CmeasurementFaFaultPos | 1.3.6.1.4.1.2544.1.14.3.9.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Fault position in decimetres.
| |||||||||||||
| CmeasurementFaDeprecated | 1.3.6.1.4.1.2544.1.14.3.9.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This variable is set to 'yes' when this Fault Analysis refers to old fingerprint, i.e. new finger print was generated after this Fault Analysis had been performed.
| |||||||||||||
| CmeasurementFaDataTimestamp | 1.3.6.1.4.1.2544.1.14.3.9.1.5 | DateAndTime | RO | ||||||||||
| CmeasurementFaCorrectedFaultPos | 1.3.6.1.4.1.2544.1.14.3.9.1.6 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Corrected fault position in decimetres. If no customized events were added this entry equals -2147483648.
| |||||||||||||
| CmeasurementFaFaultPosLatitude | 1.3.6.1.4.1.2544.1.14.3.9.1.7 | DisplayString (SIZE (0..10)) | RO | ||||||||||
column · DisplayString (SIZE (0..10)) · read-only · current The latitude of the fault position in decimal degrees (-90 to 90 degree).
| |||||||||||||
| CmeasurementFaFaultPosLongitude | 1.3.6.1.4.1.2544.1.14.3.9.1.8 | DisplayString (SIZE (0..10)) | RO | ||||||||||
column · DisplayString (SIZE (0..10)) · read-only · current The longitude of the fault position in decimal degrees (-180 to 180 degree).
| |||||||||||||
| TmeasurementOtdrTable | 1.3.6.1.4.1.2544.1.14.3.10 | NA | |||||||||||
| RmeasurementOtdrEntry | 1.3.6.1.4.1.2544.1.14.3.10.1 | NA | |||||||||||
row · not-accessible · current
| |||||||||||||
| CmeasurementOtdrIndex | 1.3.6.1.4.1.2544.1.14.3.10.1.1 | Integer32 (1) | NA | ||||||||||
| CmeasurementOtdrLength | 1.3.6.1.4.1.2544.1.14.3.10.1.2 | Integer32 (100..200000) | RO | ||||||||||
column · Integer32 (100..200000) · read-only · current Measurement length in meters.
| |||||||||||||
| CmeasurementOtdrExternalOffset | 1.3.6.1.4.1.2544.1.14.3.10.1.3 | Integer32 (0..100) | RO | ||||||||||
column · Integer32 (0..100) · read-only · current External offset length in meters.
| |||||||||||||
| CmeasurementOtdrRefractiveIndex | 1.3.6.1.4.1.2544.1.14.3.10.1.4 | Integer32 (1400000..1550000) | RO | ||||||||||
column · Integer32 (1400000..1550000) · read-only · current Refractive index multiplied by 1000000. | |||||||||||||
| CmeasurementOtdrPowerLevel | 1.3.6.1.4.1.2544.1.14.3.10.1.5 | Integer32 (-2000..2000) | RO | ||||||||||
column · Integer32 (-2000..2000) · read-only · current Power level in 0.01dBm. Not available on 16ALM-1650D.
| |||||||||||||
| CmeasurementOtdrPulseWidth | 1.3.6.1.4.1.2544.1.14.3.10.1.6 | Integer32 (5..20000) | RO | ||||||||||
column · Integer32 (5..20000) · read-only · current Pulse width in ns.
| |||||||||||||
| CmeasurementOtdrAverageRate | 1.3.6.1.4.1.2544.1.14.3.10.1.7 | Integer32 (0..7) | RO | ||||||||||
column · Integer32 (0..7) · read-only · current Average rate (0=512,1=1024,2=2048,3=4096,4=8192,5=16384,6=32768,7=65536). Not available on 16ALM-1650D. | |||||||||||||
| CmeasurementOtdrDataTimestamp | 1.3.6.1.4.1.2544.1.14.3.10.1.8 | DateAndTime | RO | ||||||||||
| CmeasurementOtdrMaxLaserPower | 1.3.6.1.4.1.2544.1.14.3.10.1.9 | Integer32 (0..1000) | RO | ||||||||||
column · Integer32 (0..1000) · read-only · current Maximal laser power in 0.01dBm. Not available on 16ALM.
| |||||||||||||
| CmeasurementOtdrLinkLength | 1.3.6.1.4.1.2544.1.14.3.10.1.10 | Integer32 (100..200000) | RO | ||||||||||
column · Integer32 (100..200000) · read-only · current Length of the optical link in meters. Not available on 16ALM.
| |||||||||||||
| CmeasurementOtdrMeasTime | 1.3.6.1.4.1.2544.1.14.3.10.1.11 | Integer32 (15..300) | RO | ||||||||||
column · Integer32 (15..300) · read-only · current Measurement time in seconds. Not available on 16ALM.
| |||||||||||||
| TmeasurementAutoFaTable | 1.3.6.1.4.1.2544.1.14.3.11 | NA | |||||||||||
| RmeasurementAutoFaEntry | 1.3.6.1.4.1.2544.1.14.3.11.1 | NA | |||||||||||
row · not-accessible · current
| |||||||||||||
| CmeasurementAutoFaIndex | 1.3.6.1.4.1.2544.1.14.3.11.1.1 | Integer32 (1..20) | NA | ||||||||||
| CmeasurementAutoFaReference | 1.3.6.1.4.1.2544.1.14.3.11.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Fault analysis reference number. | |||||||||||||
| CmeasurementAutoFaLinkLoss | 1.3.6.1.4.1.2544.1.14.3.11.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Link loss at reflector in tenth of dB.
| |||||||||||||
| CmeasurementAutoFaFaultPos | 1.3.6.1.4.1.2544.1.14.3.11.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Fault position in decimetres.
| |||||||||||||
| CmeasurementAutoFaDeprecated | 1.3.6.1.4.1.2544.1.14.3.11.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current This variable is set to 'yes' when this Fault Analysis refers to old fingerprint, i.e. new finger print was generated after this Fault Analysis had been performed.
| |||||||||||||
| CmeasurementAutoFaDataTimestamp | 1.3.6.1.4.1.2544.1.14.3.11.1.6 | DateAndTime | RO | ||||||||||
| CmeasurementAutoFaCorrectedFaultPos | 1.3.6.1.4.1.2544.1.14.3.11.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Corrected fault position in decimetres. If no customized events were added this entry equals -2147483648.
| |||||||||||||
| CmeasurementAutoFaFaultPosLatitude | 1.3.6.1.4.1.2544.1.14.3.11.1.8 | DisplayString (SIZE (0..10)) | RO | ||||||||||
column · DisplayString (SIZE (0..10)) · read-only · current The latitude of the fault position in decimal degrees (-90 to 90 degree).
| |||||||||||||
| CmeasurementAutoFaFaultPosLongitude | 1.3.6.1.4.1.2544.1.14.3.11.1.9 | DisplayString (SIZE (0..10)) | RO | ||||||||||
column · DisplayString (SIZE (0..10)) · read-only · current The longitude of the fault position in decimal degrees (-180 to 180 degree).
| |||||||||||||
| TmonitorPointLossTable | 1.3.6.1.4.1.2544.1.14.3.12 | NA | |||||||||||
| RmonitorPointLossEntry | 1.3.6.1.4.1.2544.1.14.3.12.1 | NA | |||||||||||
| CmonitorPointLossCurrentLoss | 1.3.6.1.4.1.2544.1.14.3.12.1.1 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Current loss at monitor point in tenth of dB.
| |||||||||||||
| CmonitorPointLossFpLoss | 1.3.6.1.4.1.2544.1.14.3.12.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Fingerprint loss at monitor point in tenth of dB.
| |||||||||||||
| CmonitorPointLossDataTimestamp | 1.3.6.1.4.1.2544.1.14.3.12.1.3 | DateAndTime | RO | ||||||||||
| ThistMonitorPointLoss15MinTable | 1.3.6.1.4.1.2544.1.14.3.13 | NA | |||||||||||
| RhistMonitorPointLoss15MinEntry | 1.3.6.1.4.1.2544.1.14.3.13.1 | NA | |||||||||||
row · not-accessible · current Entry of histMonitorPointLoss15MinTable | |||||||||||||
| ChistMonitorPointLoss15MinNumber | 1.3.6.1.4.1.2544.1.14.3.13.1.1 | Integer32 (1..96) | NA | ||||||||||
column · Integer32 (1..96) · not-accessible · current A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 15 minute interval, and the interval identified by N is the interval immediately preceding the one identified by N-1. Only existing values will be shown. | |||||||||||||
| ChistMonitorPointLoss15MinLow | 1.3.6.1.4.1.2544.1.14.3.13.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Lowest monitor point loss
| |||||||||||||
| ChistMonitorPointLoss15MinMean | 1.3.6.1.4.1.2544.1.14.3.13.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Mean monitor point loss
| |||||||||||||
| ChistMonitorPointLoss15MinHigh | 1.3.6.1.4.1.2544.1.14.3.13.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Highest monitor point loss
| |||||||||||||
| ChistMonitorPointLoss15MinValid | 1.3.6.1.4.1.2544.1.14.3.13.1.5 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current Valid Flag | |||||||||||||
| ChistMonitorPointLoss15MinTimeStamp | 1.3.6.1.4.1.2544.1.14.3.13.1.6 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current Timestamp | |||||||||||||
| ThistMonitorPointLoss1DayTable | 1.3.6.1.4.1.2544.1.14.3.14 | NA | |||||||||||
| RhistMonitorPointLoss1DayEntry | 1.3.6.1.4.1.2544.1.14.3.14.1 | NA | |||||||||||
row · not-accessible · current Entry of histMonitorPointLoss1DayTable | |||||||||||||
| ChistMonitorPointLoss1DayNumber | 1.3.6.1.4.1.2544.1.14.3.14.1.1 | Integer32 (1..31) | NA | ||||||||||
column · Integer32 (1..31) · not-accessible · current A number, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 1 day interval. Only existing values will be shown. | |||||||||||||
| ChistMonitorPointLoss1DayLow | 1.3.6.1.4.1.2544.1.14.3.14.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Lowest monitor point loss
| |||||||||||||
| ChistMonitorPointLoss1DayMean | 1.3.6.1.4.1.2544.1.14.3.14.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Mean monitor point loss
| |||||||||||||
| ChistMonitorPointLoss1DayHigh | 1.3.6.1.4.1.2544.1.14.3.14.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Highest monitor point loss
| |||||||||||||
| ChistMonitorPointLoss1DayValid | 1.3.6.1.4.1.2544.1.14.3.14.1.5 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current Valid Flag | |||||||||||||
| ChistMonitorPointLoss1DayTimeStamp | 1.3.6.1.4.1.2544.1.14.3.14.1.6 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current Timestamp | |||||||||||||
| TmeasurementFpEventTable | 1.3.6.1.4.1.2544.1.14.3.15 | NA | |||||||||||
| RmeasurementFpEventEntry | 1.3.6.1.4.1.2544.1.14.3.15.1 | NA | |||||||||||
| CmeasurementFpEventId | 1.3.6.1.4.1.2544.1.14.3.15.1.1 | Integer32 (1..1000) | NA | ||||||||||
| CmeasurementFpEventPosition | 1.3.6.1.4.1.2544.1.14.3.15.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Position in decimeter.
| |||||||||||||
| CmeasurementFpEventReflectance | 1.3.6.1.4.1.2544.1.14.3.15.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Reflectance in tenth of dB
| |||||||||||||
| CmeasurementFpEventAttenuation | 1.3.6.1.4.1.2544.1.14.3.15.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Attenuation in tenth of dB
| |||||||||||||
| CmeasurementFpEventRemark | 1.3.6.1.4.1.2544.1.14.3.15.1.5 | DisplayString (SIZE (0..255)) | RW | ||||||||||
| TcustomizedFpEventTable | 1.3.6.1.4.1.2544.1.14.3.16 | NA | |||||||||||
| RcustomizedFpEventEntry | 1.3.6.1.4.1.2544.1.14.3.16.1 | NA | |||||||||||
| CcustomizedFpEventId | 1.3.6.1.4.1.2544.1.14.3.16.1.1 | Integer32 (1..1000) | AN | ||||||||||
| CcustomizedFpEventRowStatus | 1.3.6.1.4.1.2544.1.14.3.16.1.2 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The status of this conceptual row. To create a row in this table, set this object to createAndGo(4). To remove a row, set this object to destroy(6). | |||||||||||||
| CcustomizedFpEventCorrectedPosition | 1.3.6.1.4.1.2544.1.14.3.16.1.3 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current Corrected position in tenth of meter.
| |||||||||||||
| CcustomizedFpEventRemark | 1.3.6.1.4.1.2544.1.14.3.16.1.4 | SnmpAdminString | RC | ||||||||||
column · SnmpAdminString · read-create · current Remark. | |||||||||||||
| CcustomizedFpEventOtdrId | 1.3.6.1.4.1.2544.1.14.3.16.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current OTDR fingerprint event ID. If no mapping between GIS and OTDR event was found this entry equals -2147483648. | |||||||||||||
| CcustomizedFpEventOtdrPosition | 1.3.6.1.4.1.2544.1.14.3.16.1.6 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current OTDR distance in tenth of meter is either filled when event mapped to a fingerprint event or potentially added when not mapped.
| |||||||||||||
| CcustomizedFpEventLayoutId | 1.3.6.1.4.1.2544.1.14.3.16.1.7 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current 0 for all fingerprinttyps other then AddDropFiber. Values great the 0 are then mapping to a AddDropFiberLayoutLine between the coupler and reflector of this id. | |||||||||||||
| TmergedFpEventTable | 1.3.6.1.4.1.2544.1.14.3.17 | NA | |||||||||||
| RmergedFpEventEntry | 1.3.6.1.4.1.2544.1.14.3.17.1 | NA | |||||||||||
| CmergedFpEventId | 1.3.6.1.4.1.2544.1.14.3.17.1.1 | Integer32 (1..2000) | NA | ||||||||||
| CmergedFpEventCustomizedEventId | 1.3.6.1.4.1.2544.1.14.3.17.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Customized fingerprint event ID. | |||||||||||||
| CmergedFpEventOtdrId | 1.3.6.1.4.1.2544.1.14.3.17.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current OTDR fingerprint event ID. | |||||||||||||
| CmergedFpEventCorrectedPosition | 1.3.6.1.4.1.2544.1.14.3.17.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Corrected position in tenth of meter.
| |||||||||||||
| CmergedFpEventOtdrPosition | 1.3.6.1.4.1.2544.1.14.3.17.1.5 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current OTDR distance in tenth of meter is either filled when event mapped to a fingerprint event or potentially added when not mapped.
| |||||||||||||
| CmergedFpEventRemark | 1.3.6.1.4.1.2544.1.14.3.17.1.6 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current Remark. | |||||||||||||
| TlinkLayoutEventTable | 1.3.6.1.4.1.2544.1.14.3.18 | NA | |||||||||||
| RlinkLayoutEventEntry | 1.3.6.1.4.1.2544.1.14.3.18.1 | NA | |||||||||||
| ClinkLayoutEventId | 1.3.6.1.4.1.2544.1.14.3.18.1.1 | Integer32 (1..10) | AN | ||||||||||
| ClinkLayoutEventRowStatus | 1.3.6.1.4.1.2544.1.14.3.18.1.2 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The status of this conceptual row. To create a row in this table, set this object to createAndGo(4). To remove a row, set this object to destroy(6). | |||||||||||||
| ClinkLayoutEventMpId | 1.3.6.1.4.1.2544.1.14.3.18.1.3 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current MonitorPoint event ID. | |||||||||||||
| ClinkLayoutEventFpEventId | 1.3.6.1.4.1.2544.1.14.3.18.1.4 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current Fingerprint event ID of matching coupler. | |||||||||||||
| ClinkLayoutEventCustomizedEventId | 1.3.6.1.4.1.2544.1.14.3.18.1.5 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current Customized Event ID of matching coupler. | |||||||||||||
| ClinkLayoutEventFaultPos | 1.3.6.1.4.1.2544.1.14.3.18.1.6 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Fault position starting from last coupler in decimetres, is negative if the fault position is before the position of the corresponding coupler.
| |||||||||||||
| ClinkLayoutEventCorrectedFaultPos | 1.3.6.1.4.1.2544.1.14.3.18.1.7 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Corrected fault position starting from last coupler in decimetres. If no customized events were added this entry equals -2147483648.
| |||||||||||||
| TsegmentTable | 1.3.6.1.4.1.2544.1.14.3.19 | NA | |||||||||||
| RsegmentEntry | 1.3.6.1.4.1.2544.1.14.3.19.1 | NA | |||||||||||
| CsegmentId | 1.3.6.1.4.1.2544.1.14.3.19.1.1 | Integer32 (1..999) | AN | ||||||||||
column · Integer32 (1..999) · accessible-for-notify · current A number which identifies the Segment. The sequenze does not have to be without holes.Creating a new segment needs a free number. | |||||||||||||
| CsegmentRowStatus | 1.3.6.1.4.1.2544.1.14.3.19.1.2 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The status of this conceptual row. To create a row in this table, set this object to createAndGo(4). To remove a row, set this object to destroy(6). | |||||||||||||
| CsegmentStartEventId | 1.3.6.1.4.1.2544.1.14.3.19.1.3 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current FingerpintId for the starting event of the segment . 0 for measuring from link start. | |||||||||||||
| CsegmentStopEventId | 1.3.6.1.4.1.2544.1.14.3.19.1.4 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current FingerpintId for the stoping event of the segment . 0 for measuring from link start. | |||||||||||||
| CsegmentStartCorrection | 1.3.6.1.4.1.2544.1.14.3.19.1.5 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current Offest for the segment start realtiv to the event (0 from link start) , can be + or - , regadles of value the segment can't escape the link boundrys.
| |||||||||||||
| CsegmentStopCorrection | 1.3.6.1.4.1.2544.1.14.3.19.1.6 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current Offest for the segment stop realtiv to the event (0 from link start), can be + or - , regadles of value the segment can't escape the link boundrys.
| |||||||||||||
| CsegmentRemark | 1.3.6.1.4.1.2544.1.14.3.19.1.7 | SnmpAdminString | RC | ||||||||||
column · SnmpAdminString · read-create · current Remark. | |||||||||||||
| CsegmentFpLength | 1.3.6.1.4.1.2544.1.14.3.19.1.8 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Segment length in decimeter
| |||||||||||||
| CsegmentFpLoss | 1.3.6.1.4.1.2544.1.14.3.19.1.9 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Segment loss
| |||||||||||||
| CsegmentFpLossPerKm | 1.3.6.1.4.1.2544.1.14.3.19.1.10 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Segment loss per km
| |||||||||||||
| ThistSegmentTable | 1.3.6.1.4.1.2544.1.14.3.20 | NA | |||||||||||
| RhistSegmentEntry | 1.3.6.1.4.1.2544.1.14.3.20.1 | NA | |||||||||||
| ChistSegmentNumber | 1.3.6.1.4.1.2544.1.14.3.20.1.1 | Integer32 (1..30) | NA | ||||||||||
column · Integer32 (1..30) · not-accessible · current A number between 1 and 30, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed interval, and the interval identified by N is the interval immediately preceding the one identified by N-1. Only existing values will be shown. | |||||||||||||
| ChistSegmentLength | 1.3.6.1.4.1.2544.1.14.3.20.1.2 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Segment length in decimeter
| |||||||||||||
| ChistSegmentLoss | 1.3.6.1.4.1.2544.1.14.3.20.1.3 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Segment loss
| |||||||||||||
| ChistSegmentLossPerKm | 1.3.6.1.4.1.2544.1.14.3.20.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current Segment loss per km
| |||||||||||||
| ChistSegmentUncertain | 1.3.6.1.4.1.2544.1.14.3.20.1.5 | TruthValue | RO | ||||||||||
column · TruthValue · read-only · current Set if the loss value was to close to the noise | |||||||||||||
| ChistSegmentTimeStamp | 1.3.6.1.4.1.2544.1.14.3.20.1.6 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current Timestamp | |||||||||||||
| TinternalChannelLossTable | 1.3.6.1.4.1.2544.1.14.3.21 | NA | |||||||||||
| RinternalChannelLossEntry | 1.3.6.1.4.1.2544.1.14.3.21.1 | NA | |||||||||||
| CinternalChannelLossValue | 1.3.6.1.4.1.2544.1.14.3.21.1.1 | Integer32 (0..420) | RO | ||||||||||
column · Integer32 (0..420) · read-only · current Link loss at termination in tenth of dB.
| |||||||||||||
| CinternalChannelLossTimeStamp | 1.3.6.1.4.1.2544.1.14.3.21.1.2 | DateAndTime | RO | ||||||||||
| NeventLogs | 1.3.6.1.4.1.2544.1.14.4 | ||||||||||||
| SeventsLogged | 1.3.6.1.4.1.2544.1.14.4.1 | Unsigned32 | RO | ||||||||||
scalar · Unsigned32 · read-only · current This value is the sum of all notified events (trap counter). It is also the event number of the most recent event (eventLogIndex) found in the eventLog tables. It can, for example, be used to check if a notification (trap) is lost. The value is reset to 0 after a cold start. The counter is increased even if no trap sinks are specified. | |||||||||||||
| TeventLogTable | 1.3.6.1.4.1.2544.1.14.4.2 | NA | |||||||||||
table · not-accessible · current Table of events issued by the NE's SNMP agent. The eventLog entries are read-only. | |||||||||||||
| ReventLogEntry | 1.3.6.1.4.1.2544.1.14.4.2.1 | NA | |||||||||||
row · not-accessible · current Entries in the eventLog Table. Enterprise traps are always logged; logging of Generic traps is product specific.
| |||||||||||||
| CeventLogIndex | 1.3.6.1.4.1.2544.1.14.4.2.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current The associated neEventsLogged counter for the logged event (trap). | |||||||||||||
| CeventLogTimeStamp | 1.3.6.1.4.1.2544.1.14.4.2.1.2 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current The NE Date and Time when the event (trap) occurred. This object is used in the trap varbind. | |||||||||||||
| CeventLogNotificationOID | 1.3.6.1.4.1.2544.1.14.4.2.1.3 | OBJECT IDENTIFIER | RO | ||||||||||
column · OBJECT IDENTIFIER · read-only · current The NOTIFICATION-TYPE object identifier of the event that occurred. The last part of the OID corresponds to the specific trap type value in the trap PDU. | |||||||||||||
| CeventLogIdentityTranslation | 1.3.6.1.4.1.2544.1.14.4.2.1.4 | IdentityTranslation | RO | ||||||||||
column · IdentityTranslation · read-only · current Translation of entPhysicalIndex/ifIndex or other identifier to a string used in the trap varbind following the timestamp varbind. | |||||||||||||
| TeventLogVarTable | 1.3.6.1.4.1.2544.1.14.4.3 | NA | |||||||||||
table · not-accessible · current Table of variables corresponding to events logged in the eventLog. | |||||||||||||
| ReventLogVarEntry | 1.3.6.1.4.1.2544.1.14.4.3.1 | NA | |||||||||||
row · not-accessible · current Entries in the eventLogVar Table. An entry appears in this table for each variable in the varbind list of an entry in the eventLogTable. For an event having no variables, no entries are found in this table. | |||||||||||||
| CeventLogVarIndex | 1.3.6.1.4.1.2544.1.14.4.3.1.1 | Unsigned32 | NA | ||||||||||
column · Unsigned32 · not-accessible · current A monotonically increasing integer, starting at 1 for a given eventLogIndex, for indexing a variable contained in the varbind list of a logged event. | |||||||||||||
| CeventLogVarId | 1.3.6.1.4.1.2544.1.14.4.3.1.2 | OBJECT IDENTIFIER | RO | ||||||||||
column · OBJECT IDENTIFIER · read-only · current The object identifier of the variable in the varbind list. | |||||||||||||
| CeventLogVarType | 1.3.6.1.4.1.2544.1.14.4.3.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The type of variable. One and only one of the value objects that follow must be instantiated, based on this type. The used types depend on the enterprise traps defined for the specific product.
| |||||||||||||
| CeventLogVarInteger32Val | 1.3.6.1.4.1.2544.1.14.4.3.1.4 | Integer32 | RO | ||||||||||
column · Integer32 · read-only · current The value when eventLogVarType is 'integer32'. Integer32 is also used to represent INTEGER types. Otherwise, 0 is returned. | |||||||||||||
| CeventLogVarIpAddressVal | 1.3.6.1.4.1.2544.1.14.4.3.1.5 | IpAddress | RO | ||||||||||
column · IpAddress · read-only · current The value when eventLogVarType is 'ipAddress'. Otherwise, an empty address is returned. | |||||||||||||
| CeventLogVarOctetStringVal | 1.3.6.1.4.1.2544.1.14.4.3.1.6 | OCTET STRING (SIZE (0..255)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..255)) · read-only · current The value when eventLogVarType is 'octetString'. OctetString is used for all string types, including DisplayString, SnmpAdminString and DateAndTime. Otherwise, an empty string is returned. | |||||||||||||
| CeventLogVarOidVal | 1.3.6.1.4.1.2544.1.14.4.3.1.7 | OBJECT IDENTIFIER | RO | ||||||||||
column · OBJECT IDENTIFIER · read-only · current The value when eventLogVarType is 'objectId'.
Otherwise, an objectId { 0.0 } is returned. | |||||||||||||
| CeventLogVarCounter64Val | 1.3.6.1.4.1.2544.1.14.4.3.1.8 | Counter64 | RO | ||||||||||
column · Counter64 · read-only · current The value when eventLogVarType is 'counter64'. | |||||||||||||
| CeventLogVarUnsigned32Val | 1.3.6.1.4.1.2544.1.14.4.3.1.10 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current The value when eventLogVarType is 'unsigned32'. | |||||||||||||
| TtrapsinkTable | 1.3.6.1.4.1.2544.1.14.4.4 | NA | |||||||||||
table · not-accessible · current Table of Trapsinks. A trapsinkTable entry can be created, deleted or modified via the SNMP interface for a specific address and port. | |||||||||||||
| RtrapsinkEntry | 1.3.6.1.4.1.2544.1.14.4.4.1 | NA | |||||||||||
row · not-accessible · current Entries in the Trapsink Table. Entries are created and deleted using the trapsinkRowStatus object. The maximum of rows in this table is product specific.
| |||||||||||||
| CtrapsinkAddress | 1.3.6.1.4.1.2544.1.14.4.4.1.1 | IpAddress | AN | ||||||||||
column · IpAddress · accessible-for-notify · current IP Address of the Management System which should receive SNMP Traps. | |||||||||||||
| CtrapsinkPort | 1.3.6.1.4.1.2544.1.14.4.4.1.2 | Integer32 (0..65535) | NA | ||||||||||
column · Integer32 (0..65535) · not-accessible · current The port number where the specified trap sink will receive SNMP traps. | |||||||||||||
| CtrapsinkCommunity | 1.3.6.1.4.1.2544.1.14.4.4.1.3 | DisplayString (SIZE (0..128)) | RC | ||||||||||
column · DisplayString (SIZE (0..128)) · read-create · current Community String which is sent with an SNMP Trap to the Management Station. The default is 'public'. | |||||||||||||
| CtrapsinkRowStatus | 1.3.6.1.4.1.2544.1.14.4.4.1.4 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The status of this conceptual row. To create a row in this table, set this object to createAndGo(4). To remove a row, set this object to destroy(6). | |||||||||||||
| CtrapsinkVersion | 1.3.6.1.4.1.2544.1.14.4.4.1.5 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current The default is v2(2).
| |||||||||||||
| CtrapsinkUserName | 1.3.6.1.4.1.2544.1.14.4.4.1.6 | DisplayString (SIZE (0..255)) | RC | ||||||||||
column · DisplayString (SIZE (0..255)) · read-create · current A human readable string representing the name of the user. | |||||||||||||
| CtrapsinkRemark | 1.3.6.1.4.1.2544.1.14.4.4.1.7 | OCTET STRING (SIZE (0..500)) | RC | ||||||||||
column · OCTET STRING (SIZE (0..500)) · read-create · current A human readable string representing the remark for the trap sink. | |||||||||||||
| CtrapsinkLifetime | 1.3.6.1.4.1.2544.1.14.4.4.1.8 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Lifetime of Trapsink
| |||||||||||||
| Tipv6TrapsinkTable | 1.3.6.1.4.1.2544.1.14.4.5 | NA | |||||||||||
table · not-accessible · current Table of IPv6 Trapsinks. A ipv6TrapsinkTable entry can be created, deleted or modified via the SNMP interface for a specific address and port. | |||||||||||||
| Ripv6TrapsinkEntry | 1.3.6.1.4.1.2544.1.14.4.5.1 | NA | |||||||||||
row · not-accessible · current Entries in the IPv6 Trapsink Table. Entries are created and deleted using the ipv6TrapsinkRowStatus object. The maximum of rows in this table is product specific.
| |||||||||||||
| Cipv6TrapsinkId | 1.3.6.1.4.1.2544.1.14.4.5.1.1 | Integer32 (1..10) | AN | ||||||||||
| Cipv6TrapsinkAddress | 1.3.6.1.4.1.2544.1.14.4.5.1.2 | DisplayString | RC | ||||||||||
column · DisplayString · read-create · current IPv6 Address of the Management System which should receive SNMP Traps. | |||||||||||||
| Cipv6TrapsinkPort | 1.3.6.1.4.1.2544.1.14.4.5.1.3 | Integer32 (0..65535) | RC | ||||||||||
column · Integer32 (0..65535) · read-create · current The port number where the specified trap sink will receive SNMP traps. | |||||||||||||
| Cipv6TrapsinkCommunity | 1.3.6.1.4.1.2544.1.14.4.5.1.4 | DisplayString (SIZE (0..128)) | RC | ||||||||||
column · DisplayString (SIZE (0..128)) · read-create · current Community String which is sent with an SNMP Trap to the Management Station. The default is 'public'. | |||||||||||||
| Cipv6TrapsinkRowStatus | 1.3.6.1.4.1.2544.1.14.4.5.1.5 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The status of this conceptual row. To create a row in this table, set this object to createAndGo(4). To remove a row, set this object to destroy(6). | |||||||||||||
| Cipv6TrapsinkVersion | 1.3.6.1.4.1.2544.1.14.4.5.1.6 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current The default is v2(2).
| |||||||||||||
| Cipv6TrapsinkUserName | 1.3.6.1.4.1.2544.1.14.4.5.1.7 | DisplayString (SIZE (0..255)) | RC | ||||||||||
column · DisplayString (SIZE (0..255)) · read-create · current A human readable string representing the name of the user. | |||||||||||||
| Cipv6TrapsinkRemark | 1.3.6.1.4.1.2544.1.14.4.5.1.8 | OCTET STRING (SIZE (0..500)) | RC | ||||||||||
column · OCTET STRING (SIZE (0..500)) · read-create · current A human readable string representing the remark for the trap sink. | |||||||||||||
| Cipv6TrapsinkLifetime | 1.3.6.1.4.1.2544.1.14.4.5.1.9 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Lifetime of ipv6Trapsink
| |||||||||||||
| NsysLogRecipients | 1.3.6.1.4.1.2544.1.14.4.6 | ||||||||||||
| SsysLogRecipient1Address | 1.3.6.1.4.1.2544.1.14.4.6.1 | DisplayString (SIZE (0..45)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..45)) · read-write · current An IPv4/IPv6 address of one syslog server. | |||||||||||||
| SsysLogRecipient2Address | 1.3.6.1.4.1.2544.1.14.4.6.2 | DisplayString (SIZE (0..45)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..45)) · read-write · current An IPv4/IPv6 address of one syslog server. | |||||||||||||
| SsysLogRecipient3Address | 1.3.6.1.4.1.2544.1.14.4.6.3 | DisplayString (SIZE (0..45)) | RW | ||||||||||
scalar · DisplayString (SIZE (0..45)) · read-write · current An IPv4/IPv6 address of one syslog server. | |||||||||||||
| TdnsTrapsinkTable | 1.3.6.1.4.1.2544.1.14.4.7 | NA | |||||||||||
table · not-accessible · current Table of Trapsinks. A dnsTrapsinkTable entry can be created, deleted or modified via the SNMP interface for a specific address and port. | |||||||||||||
| RdnsTrapsinkEntry | 1.3.6.1.4.1.2544.1.14.4.7.1 | NA | |||||||||||
row · not-accessible · current Entries in the dns Trapsink Table. Entries are created and deleted using the dnsTrapsinkRowStatus object. The maximum of rows in this table is product specific.
| |||||||||||||
| CdnsTrapsinkId | 1.3.6.1.4.1.2544.1.14.4.7.1.1 | Integer32 (1..10) | AN | ||||||||||
| CdnsTrapsinkHostName | 1.3.6.1.4.1.2544.1.14.4.7.1.2 | DisplayString | RC | ||||||||||
column · DisplayString · read-create · current Host Address of the Management System which should receive SNMP Traps. | |||||||||||||
| CdnsTrapsinkPort | 1.3.6.1.4.1.2544.1.14.4.7.1.3 | Integer32 (0..65535) | RC | ||||||||||
column · Integer32 (0..65535) · read-create · current The port number where the specified trap sink will receive SNMP traps. | |||||||||||||
| CdnsTrapsinkCommunity | 1.3.6.1.4.1.2544.1.14.4.7.1.4 | DisplayString (SIZE (0..128)) | RC | ||||||||||
column · DisplayString (SIZE (0..128)) · read-create · current Community String which is sent with an SNMP Trap to the Management Station. The default is 'public'. | |||||||||||||
| CdnsTrapsinkRowStatus | 1.3.6.1.4.1.2544.1.14.4.7.1.5 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The status of this conceptual row. To create a row in this table, set this object to createAndGo(4). To remove a row, set this object to destroy(6). | |||||||||||||
| CdnsTrapsinkVersion | 1.3.6.1.4.1.2544.1.14.4.7.1.6 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current The default is v2(2).
| |||||||||||||
| CdnsTrapsinkUserName | 1.3.6.1.4.1.2544.1.14.4.7.1.7 | DisplayString (SIZE (0..255)) | RC | ||||||||||
column · DisplayString (SIZE (0..255)) · read-create · current A human readable string representing the name of the user. | |||||||||||||
| CdnsTrapsinkRemark | 1.3.6.1.4.1.2544.1.14.4.7.1.8 | OCTET STRING (SIZE (0..500)) | RC | ||||||||||
column · OCTET STRING (SIZE (0..500)) · read-create · current A human readable string representing the remark for the trap sink. | |||||||||||||
| CdnsTrapsinkLifetime | 1.3.6.1.4.1.2544.1.14.4.7.1.9 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Lifetime of dnsTrapsink
| |||||||||||||
| SsysLogFacility | 1.3.6.1.4.1.2544.1.14.4.8 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This value is the default facility ALM labels its syslog messages.
| |||||||||||||
| Nsystem | 1.3.6.1.4.1.2544.1.14.5 | ||||||||||||
| Ninformation | 1.3.6.1.4.1.2544.1.14.5.1 | ||||||||||||
| SsoftwareVersion | 1.3.6.1.4.1.2544.1.14.5.1.1 | SnmpAdminString | RO | ||||||||||
scalar · SnmpAdminString · read-only · current Reports the running software version on the device | |||||||||||||
| SlocalDateAndTime | 1.3.6.1.4.1.2544.1.14.5.1.2 | DateAndTime | RO | ||||||||||
scalar · DateAndTime · read-only · current Reports the current local time on the device. | |||||||||||||
| SreleaseNumber | 1.3.6.1.4.1.2544.1.14.5.1.3 | Integer32 | RO | ||||||||||
scalar · Integer32 · read-only · current The release number of the product. It will have the following format: XXYYZZ. For example, release version 1.2.1 will be identified in the following way:'10201'. | |||||||||||||
| SexpectedSoftwareVersion | 1.3.6.1.4.1.2544.1.14.5.1.4 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current Value set by System Controller when this unit is attached to it. The value must match the softwareVersion value. In case values do not match, then trap alarmAlmPackageMismatch is sent (and alarm is raised). Trap is not sent (and alarm is not raised) when value is empty or when operationMode is set to 'standalone'. | |||||||||||||
| NipSettings | 1.3.6.1.4.1.2544.1.14.5.2 | ||||||||||||
| SipAddress | 1.3.6.1.4.1.2544.1.14.5.2.1 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current IP address of the system (IPv4). Changes to IP Settings should be made in one SET request. | |||||||||||||
| SsubnetMask | 1.3.6.1.4.1.2544.1.14.5.2.2 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Subnet mask. Changes to IP Settings should be made in one SET request. | |||||||||||||
| Sgateway | 1.3.6.1.4.1.2544.1.14.5.2.3 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current Gateway. Changes to IP Settings should be made in one SET request. | |||||||||||||
| Sdns1 | 1.3.6.1.4.1.2544.1.14.5.2.4 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current DNS server 1. The address '0.0.0.0' may be used to remove an entry. Changes to IP Settings should be made in one SET request. | |||||||||||||
| Sdns2 | 1.3.6.1.4.1.2544.1.14.5.2.5 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current DNS server 2. The address '0.0.0.0' may be used to remove an entry. Changes to IP Settings should be made in one SET request. | |||||||||||||
| Sdhcp | 1.3.6.1.4.1.2544.1.14.5.2.6 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Dynamic Host Configuration Protocol (DHCP) configuration. Changes to IP Settings should be made in one SET request but if you enable DHCP only this value and IPv6 address/dns can be set in one SET request.
| |||||||||||||
| Sipv6Address | 1.3.6.1.4.1.2544.1.14.5.2.7 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current IPv6 address of the system. Changes to IP Settings should be made in one SET request but IPv6 Address can be configured independently. | |||||||||||||
| Sipv6Dns1 | 1.3.6.1.4.1.2544.1.14.5.2.8 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current IPv6 DNS server 1. The address '::' may be used to remove an entry. Changes to IP Settings should be made in one SET request. | |||||||||||||
| Sipv6Dns2 | 1.3.6.1.4.1.2544.1.14.5.2.9 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current IPv6 DNS server 2. The address '::' may be used to remove an entry. Changes to IP Settings should be made in one SET request. | |||||||||||||
| NipSettingsUsb | 1.3.6.1.4.1.2544.1.14.5.2.10 | ||||||||||||
| SipSettingsUsbMode | 1.3.6.1.4.1.2544.1.14.5.2.10.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Needs to be set according to the connected USB-device . Changes to USB IP Settings should be made in one SET request.
| |||||||||||||
| SipSettingsUsbMobileDialInNumber | 1.3.6.1.4.1.2544.1.14.5.2.10.2 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current Only relevant for usbmode=Mobile(3). Changes to USB IP Settings should be made in one SET request. | |||||||||||||
| SipSettingsUsbMobileAPN | 1.3.6.1.4.1.2544.1.14.5.2.10.3 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current Only relevant for usbmode=Mobile(3). Changes to USB IP Settings should be made in one SET request. | |||||||||||||
| SipSettingsUsbMobileUserName | 1.3.6.1.4.1.2544.1.14.5.2.10.4 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current Only relevant for usbmode=Mobile(3). Changes to USB IP Settings should be made in one SET request. | |||||||||||||
| SipSettingsUsbMobileUserPassword | 1.3.6.1.4.1.2544.1.14.5.2.10.5 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current Only relevant for usbmode=Mobile(3). Changes to USB IP Settings should be made in one SET request. | |||||||||||||
| SipSettingsUsbMobileSIMPin | 1.3.6.1.4.1.2544.1.14.5.2.10.6 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current Only relevant for usbmode=Mobile(3). Changes to USB IP Settings should be made in one SET request. | |||||||||||||
| SipSettingsUsbMobileIPAddress | 1.3.6.1.4.1.2544.1.14.5.2.10.7 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current Only relevant for usbmode=Mobile(3). Changes to USB IP Settings should be made in one SET request. | |||||||||||||
| SipSettingsUsbMobileRoutingNetAddress | 1.3.6.1.4.1.2544.1.14.5.2.10.8 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current Only relevant for usbmode=Mobile(3). Changes to USB IP Settings should be made in one SET request. | |||||||||||||
| SipSettingsUsbMobileRoutingNetMask | 1.3.6.1.4.1.2544.1.14.5.2.10.9 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current Only relevant for usbmode=Mobile(3). Changes to USB IP Settings should be made in one SET request. | |||||||||||||
| SipSettingsUsbLanAdapterIPAddress | 1.3.6.1.4.1.2544.1.14.5.2.10.10 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current Only relevant for usbmode=LanAdapter(5). Changes to USB IP Settings should be made in one SET request. | |||||||||||||
| SipSettingsUsbLanAdapterSubnetMask | 1.3.6.1.4.1.2544.1.14.5.2.10.11 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current Only relevant for usbmode=LanAdapter(5). Changes to USB IP Settings should be made in one SET request. | |||||||||||||
| SipSettingsUsbLanAdapterGateway | 1.3.6.1.4.1.2544.1.14.5.2.10.12 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current Only relevant for usbmode=LanAdapter(5). Changes to USB IP Settings should be made in one SET request. | |||||||||||||
| SipSettingsUsbLanAdapterRoutingNetAddress | 1.3.6.1.4.1.2544.1.14.5.2.10.13 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current Only relevant for usbmode=LanAdapter(5). Changes to USB IP Settings should be made in one SET request. | |||||||||||||
| SipSettingsUsbLanAdapterRoutingNetMask | 1.3.6.1.4.1.2544.1.14.5.2.10.14 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current Only relevant for usbmode=LanAdapter(5). Changes to USB IP Settings should be made in one SET request. | |||||||||||||
| TethernetPortTable | 1.3.6.1.4.1.2544.1.14.5.2.11 | NA | |||||||||||
| RethernetPortEntry | 1.3.6.1.4.1.2544.1.14.5.2.11.1 | NA | |||||||||||
row · not-accessible · current
| |||||||||||||
| CethernetPortId | 1.3.6.1.4.1.2544.1.14.5.2.11.1.1 | Integer32 (1) | NA | ||||||||||
column · Integer32 (1) · not-accessible · current Index | |||||||||||||
| CethernetPortIdentifier | 1.3.6.1.4.1.2544.1.14.5.2.11.1.2 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current Identifier of the Ethernetdevice | |||||||||||||
| CethernetPortMode | 1.3.6.1.4.1.2544.1.14.5.2.11.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current selected ethernet mode,not configurable on some hardware
| |||||||||||||
| CethernetPortBitrate | 1.3.6.1.4.1.2544.1.14.5.2.11.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current curent ethernet Bitrate
| |||||||||||||
| CethernetPortDuplex | 1.3.6.1.4.1.2544.1.14.5.2.11.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current current duplex mode
| |||||||||||||
| CethernetPortMtu | 1.3.6.1.4.1.2544.1.14.5.2.11.1.6 | Integer32 (1280..1500) | RW | ||||||||||
column · Integer32 (1280..1500) · read-write · current configured Mtu | |||||||||||||
| NsoftwareMgmt | 1.3.6.1.4.1.2544.1.14.5.3 | ||||||||||||
| TsoftwareMgmtFileTable | 1.3.6.1.4.1.2544.1.14.5.3.1 | NA | |||||||||||
| RsoftwareMgmtFileEntry | 1.3.6.1.4.1.2544.1.14.5.3.1.1 | NA | |||||||||||
row · not-accessible · current | |||||||||||||
| CsoftwareMgmtFileIndex | 1.3.6.1.4.1.2544.1.14.5.3.1.1.1 | Integer32 (0..5) | NA | ||||||||||
column · Integer32 (0..5) · not-accessible · current Index | |||||||||||||
| CsoftwareMgmtFileSize | 1.3.6.1.4.1.2544.1.14.5.3.1.1.2 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Size of File
| |||||||||||||
| CsoftwareMgmtFileCreationTime | 1.3.6.1.4.1.2544.1.14.5.3.1.1.3 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current Creation Time | |||||||||||||
| CsoftwareMgmtFileVersion | 1.3.6.1.4.1.2544.1.14.5.3.1.1.4 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current General Release Issue Number of software | |||||||||||||
| CsoftwareMgmtFileFileName | 1.3.6.1.4.1.2544.1.14.5.3.1.1.5 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current File Name | |||||||||||||
| CsoftwareMgmtFileRowStatus | 1.3.6.1.4.1.2544.1.14.5.3.1.1.6 | RowStatus | RW | ||||||||||
column · RowStatus · read-write · current The status of this row. Only active(1) and destroy(6) values are supported. New row is created when a new DB file is generated by backup action or downloaded to the storage. To remove a file from storage represented by this row, set this object destroy(6). | |||||||||||||
| SsoftwareMgmtRequest | 1.3.6.1.4.1.2544.1.14.5.3.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Set request to initiate software management related action
| |||||||||||||
| SsoftwareMgmtState | 1.3.6.1.4.1.2544.1.14.5.3.3 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The current status of the SW upgrade process. When failure is set then softwareMgmtLastError is applicable.
| |||||||||||||
| SsoftwareMgmtLastError | 1.3.6.1.4.1.2544.1.14.5.3.4 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The latest failure in the software upgrade process.
Applicable only when softwareMgmtState is set to 'failure'.
NOTE: All failures that are caused by malfunctioning
hardware are reported as internalError(10).
| |||||||||||||
| SsoftwareMgmtDatabaseUsage | 1.3.6.1.4.1.2544.1.14.5.3.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Options defining which database will be used after upgrade/reboot. When storage is selected then softwareMgmtDatabaseFileName must be set
| |||||||||||||
| SsoftwareMgmtDatabaseFileName | 1.3.6.1.4.1.2544.1.14.5.3.6 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current DB filename located in the storage which will be used after SW installation when softwareMgmtDatabaseUsage is set to storage(2) | |||||||||||||
| SsoftwareMgmtServerAddress | 1.3.6.1.4.1.2544.1.14.5.3.7 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP address of the external FTP/SCP server. | |||||||||||||
| SsoftwareMgmtServerLogin | 1.3.6.1.4.1.2544.1.14.5.3.8 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current The login name on the external FTP/SCP server. | |||||||||||||
| SsoftwareMgmtServerPasswd | 1.3.6.1.4.1.2544.1.14.5.3.9 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current The password on the external FTP/SCP server. Read requests on this object will return a zero-length string. | |||||||||||||
| SsoftwareMgmtServerDirectory | 1.3.6.1.4.1.2544.1.14.5.3.10 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current The SW file location (path) on the external FTP/SCP server. | |||||||||||||
| SsoftwareMgmtFileName | 1.3.6.1.4.1.2544.1.14.5.3.11 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current The SW file name (without path) on the external FTP/SCP server or the name of the file which has been downloaded to the NE. | |||||||||||||
| SsoftwareMgmtTransferProtocol | 1.3.6.1.4.1.2544.1.14.5.3.12 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The transfer protocol to be used.
| |||||||||||||
| SsoftwareMgmtFtpPort | 1.3.6.1.4.1.2544.1.14.5.3.13 | Integer32 (0..65535) | RW | ||||||||||
scalar · Integer32 (0..65535) · read-write · current The TCP port number of FTP server used for file transfer. Default value is 21. | |||||||||||||
| SsoftwareMgmtActionProgress | 1.3.6.1.4.1.2544.1.14.5.3.14 | Integer32 (0..100 | -2147483648) | RO | ||||||||||
scalar · Integer32 (0..100 | -2147483648) · read-only · current Operational progress in % i.e. file transfer
| |||||||||||||
| SsoftwareMgmtIpv6Address | 1.3.6.1.4.1.2544.1.14.5.3.15 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current The IPv6 address of the external FTP/SCP server. | |||||||||||||
| SsoftwareMgmtScpPort | 1.3.6.1.4.1.2544.1.14.5.3.16 | Integer32 (0..65535) | RW | ||||||||||
scalar · Integer32 (0..65535) · read-write · current The TCP port number of SCP server used for file transfer. Default value is 22. | |||||||||||||
| SsoftwareMgmtBackupPassword | 1.3.6.1.4.1.2544.1.14.5.3.17 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current Optional, the password decrypting the backup. Only used if softwareMgmtDatabaseUsage is set to storage(2) For Decryption it has to be sent together with softwareMgmtRequest Read requests on this object will return a zero-length string. | |||||||||||||
| NdatabaseMgmt | 1.3.6.1.4.1.2544.1.14.5.4 | ||||||||||||
| TdatabaseMgmtFileTable | 1.3.6.1.4.1.2544.1.14.5.4.1 | NA | |||||||||||
| RdatabaseMgmtFileEntry | 1.3.6.1.4.1.2544.1.14.5.4.1.1 | NA | |||||||||||
row · not-accessible · current | |||||||||||||
| CdatabaseMgmtFileIndex | 1.3.6.1.4.1.2544.1.14.5.4.1.1.1 | Integer32 (0..5) | NA | ||||||||||
column · Integer32 (0..5) · not-accessible · current Index | |||||||||||||
| CdatabaseMgmtFileSize | 1.3.6.1.4.1.2544.1.14.5.4.1.1.2 | Unsigned32 | RO | ||||||||||
column · Unsigned32 · read-only · current Size of File
| |||||||||||||
| CdatabaseMgmtFileCreationTime | 1.3.6.1.4.1.2544.1.14.5.4.1.1.3 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current Creation Time | |||||||||||||
| CdatabaseMgmtFileVersion | 1.3.6.1.4.1.2544.1.14.5.4.1.1.4 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current General Release Issue Number of software | |||||||||||||
| CdatabaseMgmtFileFileName | 1.3.6.1.4.1.2544.1.14.5.4.1.1.5 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current File Name | |||||||||||||
| CdatabaseMgmtFileRowStatus | 1.3.6.1.4.1.2544.1.14.5.4.1.1.6 | RowStatus | RW | ||||||||||
column · RowStatus · read-write · current The status of this row. Only active(1) and destroy(6) values are supported. New row is created when a new software image file downloaded to the storage. To remove a file from storage represented by this row, set this object destroy(6). | |||||||||||||
| SdatabaseMgmtRequest | 1.3.6.1.4.1.2544.1.14.5.4.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Set request to initiate software management related action
| |||||||||||||
| SdatabaseMgmtState | 1.3.6.1.4.1.2544.1.14.5.4.3 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The current status of the backup/restore DB process. When failure is set then databaseMgmtLastError is applicable.
| |||||||||||||
| SdatabaseMgmtLastError | 1.3.6.1.4.1.2544.1.14.5.4.4 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The latest failure of the backup/restore DB process.
Applicable only when databaseMgmtState is set to 'failure'.
NOTE: All failures that are caused by malfunctioning
hardware are reported as internalError.
| |||||||||||||
| SdatabaseMgmtServerAddress | 1.3.6.1.4.1.2544.1.14.5.4.5 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP address of the external FTP/SCP server. | |||||||||||||
| SdatabaseMgmtServerLogin | 1.3.6.1.4.1.2544.1.14.5.4.6 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current The login name on the external FTP/SCP server. | |||||||||||||
| SdatabaseMgmtServerPasswd | 1.3.6.1.4.1.2544.1.14.5.4.7 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current The password on the external FTP/SCP server. Read requests on this object will return a zero-length string. | |||||||||||||
| SdatabaseMgmtServerDirectory | 1.3.6.1.4.1.2544.1.14.5.4.8 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current The file location (path) on the external FTP/SCP server. | |||||||||||||
| SdatabaseMgmtFileName | 1.3.6.1.4.1.2544.1.14.5.4.9 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current The file name (without path and either without file name extension or with .ADB extension) on the external FTP/SCP server or the name of the file which has been downloaded to the NE. Set to empty for auto-generated filename, only available during the backup process, will be changed to the file name once the backup is started | |||||||||||||
| SdatabaseMgmtTransferProtocol | 1.3.6.1.4.1.2544.1.14.5.4.10 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The transfer protocol to be used.
| |||||||||||||
| SdatabaseMgmtFtpPort | 1.3.6.1.4.1.2544.1.14.5.4.11 | Integer32 (0..65535) | RW | ||||||||||
scalar · Integer32 (0..65535) · read-write · current The TCP port number of the FTP server used for file transfer. Default value is 21. | |||||||||||||
| SdatabaseMgmtActionProgress | 1.3.6.1.4.1.2544.1.14.5.4.12 | Integer32 (0..100 | -2147483648) | RO | ||||||||||
scalar · Integer32 (0..100 | -2147483648) · read-only · current Operational progress in % i.e. file transfer
| |||||||||||||
| SdatabaseMgmtIpv6Address | 1.3.6.1.4.1.2544.1.14.5.4.13 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current The IPv6 address of the external FTP/SCP server. | |||||||||||||
| SdatabaseMgmtScpPort | 1.3.6.1.4.1.2544.1.14.5.4.14 | Integer32 (0..65535) | RW | ||||||||||
scalar · Integer32 (0..65535) · read-write · current The TCP port number of the FTP server used for file transfer. Default value is 22. | |||||||||||||
| SdatabaseMgmtBackupPassword | 1.3.6.1.4.1.2544.1.14.5.4.15 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current Optional, the password encrypting/decrypting the backup, For En-/Decryption it has to be sent together with databaseMgmtRequest. Read requests on this object will return a zero-length string. | |||||||||||||
| NntpMgmt | 1.3.6.1.4.1.2544.1.14.5.5 | ||||||||||||
| SntpClientConfig | 1.3.6.1.4.1.2544.1.14.5.5.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current NTP client configuration.
| |||||||||||||
| SntpServerName | 1.3.6.1.4.1.2544.1.14.5.5.2 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Address of first NTP Server. | |||||||||||||
| SntpServerName2 | 1.3.6.1.4.1.2544.1.14.5.5.3 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Address of second NTP Server. | |||||||||||||
| SntpServerName3 | 1.3.6.1.4.1.2544.1.14.5.5.4 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Address of second NTP Server. | |||||||||||||
| SntpTimeChangeReason | 1.3.6.1.4.1.2544.1.14.5.5.5 | DisplayString | AN | ||||||||||
scalar · DisplayString · accessible-for-notify · current Reason of Time Change (manual, ntp) | |||||||||||||
| NgeneralSettings | 1.3.6.1.4.1.2544.1.14.5.6 | ||||||||||||
| SoperationMode | 1.3.6.1.4.1.2544.1.14.5.6.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Mode of operation. Switching between versions affects the available functionality of NE (e.g. user management). Switching between the modes is not service affecting and does not cause any other effects, except showing/hiding particular functionality.
| |||||||||||||
| ShttpsPort | 1.3.6.1.4.1.2544.1.14.5.6.2 | Integer32 (1..65535) | RW | ||||||||||
scalar · Integer32 (1..65535) · read-write · current Https Port for webgui access | |||||||||||||
| Naccess | 1.3.6.1.4.1.2544.1.14.5.6.3 | ||||||||||||
| SsshInterface | 1.3.6.1.4.1.2544.1.14.5.6.3.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Ssh server configuration.
| |||||||||||||
| SnetconfInterface | 1.3.6.1.4.1.2544.1.14.5.6.3.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Netconf server configuration.
| |||||||||||||
| SsshPasswordAuthentication | 1.3.6.1.4.1.2544.1.14.5.6.3.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Ssh server configuration for password interactive.
| |||||||||||||
| SgeneralSessionTimeout | 1.3.6.1.4.1.2544.1.14.5.6.3.4 | Integer32 (1..60) | RW | ||||||||||
scalar · Integer32 (1..60) · read-write · current Timeout for all sessions except snmp in minutes.
| |||||||||||||
| SsnmpSessionTimeout | 1.3.6.1.4.1.2544.1.14.5.6.3.5 | Integer32 (30..3600) | RW | ||||||||||
scalar · Integer32 (30..3600) · read-write · current Timeout for snmp sessions in seconds
| |||||||||||||
| SmaxLoginFailureDelay | 1.3.6.1.4.1.2544.1.14.5.6.3.6 | Integer32 (0..99999) | RW | ||||||||||
scalar · Integer32 (0..99999) · read-write · current Maximum wait time after a fail login attempt in seconds
| |||||||||||||
| SpasswordStrength | 1.3.6.1.4.1.2544.1.14.5.6.3.7 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Strength required for user passwords
| |||||||||||||
| SuserInfoDeletionPeriod | 1.3.6.1.4.1.2544.1.14.5.6.3.8 | Integer32 (0..1096) | RW | ||||||||||
scalar · Integer32 (0..1096) · read-write · current Period in days after user info is deleted from logs, 0 to disable the feature
| |||||||||||||
| SdefaultTrapsinkLifetime | 1.3.6.1.4.1.2544.1.14.5.6.3.9 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Default lifetime of Trapsink
| |||||||||||||
| Npki | 1.3.6.1.4.1.2544.1.14.5.6.4 | ||||||||||||
| TcaTable | 1.3.6.1.4.1.2544.1.14.5.6.4.1 | NA | |||||||||||
table · not-accessible · current caTable | |||||||||||||
| RcaEntry | 1.3.6.1.4.1.2544.1.14.5.6.4.1.1 | NA | |||||||||||
| CcaId | 1.3.6.1.4.1.2544.1.14.5.6.4.1.1.1 | Unsigned32 | AN | ||||||||||
| CcaRowStatus | 1.3.6.1.4.1.2544.1.14.5.6.4.1.1.2 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current RowStatus object is used to create or delete a row in the table. | |||||||||||||
| CcaAlias | 1.3.6.1.4.1.2544.1.14.5.6.4.1.1.3 | SnmpAdminString | RC | ||||||||||
column · SnmpAdminString · read-create · current User Applied Descriptor | |||||||||||||
| CcaScepUrl | 1.3.6.1.4.1.2544.1.14.5.6.4.1.1.4 | SnmpAdminString | RC | ||||||||||
column · SnmpAdminString · read-create · current SCEP service URL. May omit the scheme, because HTTP is used by default anyway. May omit the path, then default path for MS CA will be assumed '/CertSrv/mscep/mscep.dll/pkiclient.exe' | |||||||||||||
| CcaScepDomainName | 1.3.6.1.4.1.2544.1.14.5.6.4.1.1.5 | SnmpAdminString | RC | ||||||||||
column · SnmpAdminString · read-create · current Domain name for SCEP service authorization. | |||||||||||||
| CcaScepUserName | 1.3.6.1.4.1.2544.1.14.5.6.4.1.1.6 | SnmpAdminString | RC | ||||||||||
column · SnmpAdminString · read-create · current User name for SCEP service authorization. | |||||||||||||
| CcaScepPassword | 1.3.6.1.4.1.2544.1.14.5.6.4.1.1.7 | SnmpAdminString | RC | ||||||||||
column · SnmpAdminString · read-create · current Password for SCEP service authorization. | |||||||||||||
| CcaScepCertValidation | 1.3.6.1.4.1.2544.1.14.5.6.4.1.1.8 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current SCEP certificate(s) attibutes/extensions validation
| |||||||||||||
| CcaScepQueryMessage | 1.3.6.1.4.1.2544.1.14.5.6.4.1.1.9 | SnmpAdminString | RC | ||||||||||
column · SnmpAdminString · read-create · current Optional SCEP query message, required by some SCEP server implementations, e.g. common name of the CA/RA or any non-empty value. | |||||||||||||
| CcaScepCipherAlgorithm | 1.3.6.1.4.1.2544.1.14.5.6.4.1.1.10 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current SCEP cipher algorithm
| |||||||||||||
| CcaScepDigestAlgorithm | 1.3.6.1.4.1.2544.1.14.5.6.4.1.1.11 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current SCEP digest algorithm
| |||||||||||||
| CcaScepRequestMethod | 1.3.6.1.4.1.2544.1.14.5.6.4.1.1.12 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current SCEP request method
| |||||||||||||
| TkeyTable | 1.3.6.1.4.1.2544.1.14.5.6.4.2 | NA | |||||||||||
table · not-accessible · current keyTable | |||||||||||||
| RkeyEntry | 1.3.6.1.4.1.2544.1.14.5.6.4.2.1 | NA | |||||||||||
| CkeyId | 1.3.6.1.4.1.2544.1.14.5.6.4.2.1.1 | Unsigned32 | AN | ||||||||||
| CkeyRowStatus | 1.3.6.1.4.1.2544.1.14.5.6.4.2.1.2 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current RowStatus object is used to create or delete a row in the table. | |||||||||||||
| CkeyAlias | 1.3.6.1.4.1.2544.1.14.5.6.4.2.1.3 | SnmpAdminString | RC | ||||||||||
column · SnmpAdminString · read-create · current User Applied Descriptor | |||||||||||||
| CkeyProfile | 1.3.6.1.4.1.2544.1.14.5.6.4.2.1.4 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Cryptographic key usage/application profile.
| |||||||||||||
| CkeyAlgorithm | 1.3.6.1.4.1.2544.1.14.5.6.4.2.1.5 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Cryptographic key algorithm
| |||||||||||||
| CkeyLength | 1.3.6.1.4.1.2544.1.14.5.6.4.2.1.6 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Cryptographic key bit-length or bit-size. It is not a direct 'security level', because it depends on key algorithm in the first place.
| |||||||||||||
| CkeySha1 | 1.3.6.1.4.1.2544.1.14.5.6.4.2.1.7 | OCTET STRING (SIZE (0..255)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..255)) · read-only · current SHA-1 fingerprint (hash value) of data | |||||||||||||
| CkeySha256 | 1.3.6.1.4.1.2544.1.14.5.6.4.2.1.8 | OCTET STRING (SIZE (0..255)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..255)) · read-only · current SHA-256 fingerprint (hash value) of data | |||||||||||||
| CkeyCertCommonName | 1.3.6.1.4.1.2544.1.14.5.6.4.2.1.9 | SnmpAdminString | RC | ||||||||||
column · SnmpAdminString · read-create · current Public key certificate subject's common name | |||||||||||||
| CkeyCertAlternativeNameIp | 1.3.6.1.4.1.2544.1.14.5.6.4.2.1.10 | SnmpAdminString | RC | ||||||||||
column · SnmpAdminString · read-create · current Public key certificate subject's alternative name (IP address) | |||||||||||||
| CkeyCertAlternativeNameDns | 1.3.6.1.4.1.2544.1.14.5.6.4.2.1.11 | SnmpAdminString | RC | ||||||||||
column · SnmpAdminString · read-create · current Public key certificate subject's alternative name (DNS name) | |||||||||||||
| CkeyCertKeyUsage | 1.3.6.1.4.1.2544.1.14.5.6.4.2.1.12 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current Public key certificate key usage (X.509 attribute) | |||||||||||||
| CkeyCertExtKeyUsage | 1.3.6.1.4.1.2544.1.14.5.6.4.2.1.13 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current Public key certificate extended key usage (X.509 attribute) | |||||||||||||
| CkeyCertValidityPeriod | 1.3.6.1.4.1.2544.1.14.5.6.4.2.1.14 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current Public key certificate requested validity period (in years), only for selfsigned
| |||||||||||||
| CkeyCertRequestChallenge | 1.3.6.1.4.1.2544.1.14.5.6.4.2.1.15 | SnmpAdminString | RC | ||||||||||
column · SnmpAdminString · read-create · current Certificate signing request challenge password. When using automatic enrollment procotol (SCEP), request challenge is used to authorize initial certificate signing request. | |||||||||||||
| CkeyCertRenewMode | 1.3.6.1.4.1.2544.1.14.5.6.4.2.1.16 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Public key certificate renewal mode - either manual or automatic. In manual mode the user must trigger generation of a new certificate.
| |||||||||||||
| CkeyCertRenewInterval | 1.3.6.1.4.1.2544.1.14.5.6.4.2.1.17 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current Public key certificate renewal interval. Determines when to renew the certificate relative to current certificate's either validity period (when given in -percentage) or validity end date (+ minutes).
| |||||||||||||
| CkeyCertRenewRetryInterval | 1.3.6.1.4.1.2544.1.14.5.6.4.2.1.18 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current Public key certificate renewal retry interval. In minutes
| |||||||||||||
| CkeyCertRenewDate | 1.3.6.1.4.1.2544.1.14.5.6.4.2.1.19 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current Planned date (UTC) of certificate (optionally, also key) renewal. Normally should be in the future, but might be in the past, especially in case of failure. | |||||||||||||
| CkeyCertWarnInterval | 1.3.6.1.4.1.2544.1.14.5.6.4.2.1.20 | Integer32 | RC | ||||||||||
column · Integer32 · read-create · current Public key certificate warn periode. Determines when to warn about a certificate, relative to current certificate's either validity period (when given in -percentage) or validity end date (+ minutes) | |||||||||||||
| CkeyCertRequest | 1.3.6.1.4.1.2544.1.14.5.6.4.2.1.21 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Starts procedure of certificate signing request to be processed by a external CA.
| |||||||||||||
| CkeyCertRequestStatus | 1.3.6.1.4.1.2544.1.14.5.6.4.2.1.22 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Status of the last certificate signing request
| |||||||||||||
| CkeyCaEntity | 1.3.6.1.4.1.2544.1.14.5.6.4.2.1.23 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current Identifier of an associated certificate authority | |||||||||||||
| CkeyCertificates | 1.3.6.1.4.1.2544.1.14.5.6.4.2.1.24 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current Identifiers of associated public key certificate(s) | |||||||||||||
| TcertificateTable | 1.3.6.1.4.1.2544.1.14.5.6.4.3 | NA | |||||||||||
table · not-accessible · current certificateTable | |||||||||||||
| RcertificateEntry | 1.3.6.1.4.1.2544.1.14.5.6.4.3.1 | NA | |||||||||||
| CcertificateId | 1.3.6.1.4.1.2544.1.14.5.6.4.3.1.1 | Unsigned32 | AN | ||||||||||
| CcertificateType | 1.3.6.1.4.1.2544.1.14.5.6.4.3.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Public key certificate type.
| |||||||||||||
| CcertificateValidityStatus | 1.3.6.1.4.1.2544.1.14.5.6.4.3.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Public key certificate type and validity status
| |||||||||||||
| CcertificatePurpose | 1.3.6.1.4.1.2544.1.14.5.6.4.3.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Public key certificate purpose/application. When associated key is available, its purpose is derived from the associated key's profile. Otherwise the purpose needs to be declared.
| |||||||||||||
| CcertificateStatus | 1.3.6.1.4.1.2544.1.14.5.6.4.3.1.5 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Certificate status.
| |||||||||||||
| CcertificateIssuer | 1.3.6.1.4.1.2544.1.14.5.6.4.3.1.6 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current Public key certificate issuer | |||||||||||||
| CcertificateSerialNo | 1.3.6.1.4.1.2544.1.14.5.6.4.3.1.7 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current Public key certificate serial number | |||||||||||||
| CcertificateSubject | 1.3.6.1.4.1.2544.1.14.5.6.4.3.1.8 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current Public key certificate subject | |||||||||||||
| CcertificateCommonName | 1.3.6.1.4.1.2544.1.14.5.6.4.3.1.9 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current Public key certificate subject's common name | |||||||||||||
| CcertificateValidFrom | 1.3.6.1.4.1.2544.1.14.5.6.4.3.1.10 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current Start date (UTC) of public key certificate's validity period | |||||||||||||
| CcertificateValidTo | 1.3.6.1.4.1.2544.1.14.5.6.4.3.1.11 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current End date (UTC) of public key certificate's validity period | |||||||||||||
| CcertificateSignAlgorithm | 1.3.6.1.4.1.2544.1.14.5.6.4.3.1.12 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Certificate signature hash (message digest) algorithm
| |||||||||||||
| CcertificateSha1 | 1.3.6.1.4.1.2544.1.14.5.6.4.3.1.13 | OCTET STRING (SIZE (0..255)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..255)) · read-only · current SHA-1 fingerprint (hash value) of data | |||||||||||||
| CcertificateSha256 | 1.3.6.1.4.1.2544.1.14.5.6.4.3.1.14 | OCTET STRING (SIZE (0..255)) | RO | ||||||||||
column · OCTET STRING (SIZE (0..255)) · read-only · current SHA-256 fingerprint (hash value) of data | |||||||||||||
| CcertificateAlternativeNameIp | 1.3.6.1.4.1.2544.1.14.5.6.4.3.1.15 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current Public key certificate subject's alternative name (multiple IP addresses) | |||||||||||||
| CcertificateAlternativeNameDns | 1.3.6.1.4.1.2544.1.14.5.6.4.3.1.16 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current Public key certificate subject's alternative name (multiple DNS names) | |||||||||||||
| CcertificateKeyUsage | 1.3.6.1.4.1.2544.1.14.5.6.4.3.1.17 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current Public key certificate key usage (X.509 attribute) | |||||||||||||
| CcertificateExtKeyUsage | 1.3.6.1.4.1.2544.1.14.5.6.4.3.1.18 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current Public key certificate extended key usage (X.509 attribute) | |||||||||||||
| CcertificateBasicConstraints | 1.3.6.1.4.1.2544.1.14.5.6.4.3.1.19 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current Public key certificate basic constraints | |||||||||||||
| CcertificateCrlDistrPoints | 1.3.6.1.4.1.2544.1.14.5.6.4.3.1.20 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current List of CRL distribution points URLs (CDPs), extracted from certificate extension. Supports only HTTP URLs, other protocols are ignored. | |||||||||||||
| CcertificateCaEntity | 1.3.6.1.4.1.2544.1.14.5.6.4.3.1.21 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current Identifier of an associated certificate authority | |||||||||||||
| CcertificateKeyEntity | 1.3.6.1.4.1.2544.1.14.5.6.4.3.1.22 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current Identifiers of cryptograhic keys associated with public key certificate. | |||||||||||||
| NemailNotifySettings | 1.3.6.1.4.1.2544.1.14.5.7 | ||||||||||||
| SemailNotifyConfig | 1.3.6.1.4.1.2544.1.14.5.7.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Email functionality configuration.
| |||||||||||||
| SsmtpServerName | 1.3.6.1.4.1.2544.1.14.5.7.2 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Name or IP Address (IPv4 or IPv6) of the SMTP server. | |||||||||||||
| SsmtpServerPort | 1.3.6.1.4.1.2544.1.14.5.7.3 | Integer32 (1..65535) | RW | ||||||||||
scalar · Integer32 (1..65535) · read-write · current Port of the SMTP server. | |||||||||||||
| SsmtpServerConnectionSecurity | 1.3.6.1.4.1.2544.1.14.5.7.4 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Security type for the connection to the SMTP server.
| |||||||||||||
| SsmtpServerAuthConfig | 1.3.6.1.4.1.2544.1.14.5.7.5 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Configuration of authentication with SMTP server. If set from noAuth(1) to auth(2) then smtpServerAccount and smtpServerPasswd have to be given in the same SET request.
| |||||||||||||
| SsmtpServerAccount | 1.3.6.1.4.1.2544.1.14.5.7.6 | SnmpAdminString (SIZE (0..100)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..100)) · read-write · current Account used for authentication with SMTP server. | |||||||||||||
| SsmtpServerPasswd | 1.3.6.1.4.1.2544.1.14.5.7.7 | SnmpAdminString (SIZE (0..100)) | RW | ||||||||||
scalar · SnmpAdminString (SIZE (0..100)) · read-write · current Password used for authentication with SMTP server. Read requests on this object will return a zero-length string. | |||||||||||||
| TemailRecipientTable | 1.3.6.1.4.1.2544.1.14.5.7.8 | NA | |||||||||||
table · not-accessible · current Table of email recipients. | |||||||||||||
| RemailRecipientEntry | 1.3.6.1.4.1.2544.1.14.5.7.8.1 | NA | |||||||||||
row · not-accessible · current
| |||||||||||||
| CemailRecipientId | 1.3.6.1.4.1.2544.1.14.5.7.8.1.1 | Integer32 (1..10) | NA | ||||||||||
| CemailRecipientAddress | 1.3.6.1.4.1.2544.1.14.5.7.8.1.2 | DisplayString | RC | ||||||||||
column · DisplayString · read-create · current An email address. | |||||||||||||
| CemailRecipientType | 1.3.6.1.4.1.2544.1.14.5.7.8.1.3 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current The default value is to(1).
| |||||||||||||
| CemailRecipientRowStatus | 1.3.6.1.4.1.2544.1.14.5.7.8.1.4 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current The status of this conceptual row. To create a row in this table, set this object to createAndGo(4). To remove a row, set this object to destroy(6). | |||||||||||||
| CemailRecipientFormat | 1.3.6.1.4.1.2544.1.14.5.7.8.1.5 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current The email format. You can choose either XML or the human readable email text format. The default value is xml(1)
| |||||||||||||
| CemailRecipientMinSeverity | 1.3.6.1.4.1.2544.1.14.5.7.8.1.6 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current The minimum severity of alarms that are sent to the recipient. The default value is low(1)
| |||||||||||||
| CemailRecipientAttachment | 1.3.6.1.4.1.2544.1.14.5.7.8.1.7 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Attach trace in sor format. The default value is no(1)
| |||||||||||||
| TexternalIdTable | 1.3.6.1.4.1.2544.1.14.5.7.9 | NA | |||||||||||
table · not-accessible · current Table defining the mapping of portIds to externalIds. | |||||||||||||
| RexternalIdEntry | 1.3.6.1.4.1.2544.1.14.5.7.9.1 | NA | |||||||||||
row · not-accessible · current
| |||||||||||||
| CexternalId | 1.3.6.1.4.1.2544.1.14.5.7.9.1.1 | DisplayString (SIZE (0..64)) | RW | ||||||||||
column · DisplayString (SIZE (0..64)) · read-write · current The externalId for the corresponding port. | |||||||||||||
| SsmtpSenderAddress | 1.3.6.1.4.1.2544.1.14.5.7.10 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current Sender Address. | |||||||||||||
| SsmtpExtendedHello | 1.3.6.1.4.1.2544.1.14.5.7.11 | DisplayString | RW | ||||||||||
scalar · DisplayString · read-write · current EHLO (Extended Hello) or HELO (Hello) identifies the server initiating the connection. | |||||||||||||
| NadvaSecurity | 1.3.6.1.4.1.2544.1.14.5.8 | ||||||||||||
| SauthTrapUserName | 1.3.6.1.4.1.2544.1.14.5.8.1 | SnmpAdminString | AN | ||||||||||
scalar · SnmpAdminString · accessible-for-notify · current The name string for user authentication purposes. | |||||||||||||
| SauthTrapLctIp | 1.3.6.1.4.1.2544.1.14.5.8.2 | IpAddress | AN | ||||||||||
scalar · IpAddress · accessible-for-notify · current IP address of LCT used in NE access. | |||||||||||||
| SauthTrapStatus | 1.3.6.1.4.1.2544.1.14.5.8.3 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current Indication whether security operation was successful/unsuccessful.
| |||||||||||||
| SauthTrapSessionId | 1.3.6.1.4.1.2544.1.14.5.8.4 | SnmpAdminString | AN | ||||||||||
scalar · SnmpAdminString · accessible-for-notify · current Session name used in NE access. | |||||||||||||
| SauthTrapProtocol | 1.3.6.1.4.1.2544.1.14.5.8.5 | INTEGER | AN | ||||||||||
scalar · INTEGER · accessible-for-notify · current Protocol type used in NE access.
| |||||||||||||
| SauthTrapSuccessfulAuthCount | 1.3.6.1.4.1.2544.1.14.5.8.6 | Unsigned32 | AN | ||||||||||
scalar · Unsigned32 · accessible-for-notify · current Number of successful authentications. | |||||||||||||
| SauthTrapUnsuccessfulAuthCount | 1.3.6.1.4.1.2544.1.14.5.8.7 | Unsigned32 | AN | ||||||||||
scalar · Unsigned32 · accessible-for-notify · current Number of unsuccessful authentications. | |||||||||||||
| SauthTrapLogoutCount | 1.3.6.1.4.1.2544.1.14.5.8.8 | Unsigned32 | AN | ||||||||||
scalar · Unsigned32 · accessible-for-notify · current Number of logouts. | |||||||||||||
| SauthTrapLctIpv6 | 1.3.6.1.4.1.2544.1.14.5.8.9 | SnmpAdminString | AN | ||||||||||
scalar · SnmpAdminString · accessible-for-notify · current IPv6 address of LCT used in NE access. | |||||||||||||
| NlossGuidance | 1.3.6.1.4.1.2544.1.14.5.9 | ||||||||||||
| SlossGuidanceConfig | 1.3.6.1.4.1.2544.1.14.5.9.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current
| |||||||||||||
| SminLoss | 1.3.6.1.4.1.2544.1.14.5.9.2 | Integer32 (20..50) | RW | ||||||||||
scalar · Integer32 (20..50) · read-write · current Default value is 20. In tenth of dB.
| |||||||||||||
| SalwDev | 1.3.6.1.4.1.2544.1.14.5.9.3 | Integer32 (10..30) | RW | ||||||||||
scalar · Integer32 (10..30) · read-write · current Default value is 10. In tenth of dB.
| |||||||||||||
| SlossKm | 1.3.6.1.4.1.2544.1.14.5.9.4 | Integer32 (10..50) | RW | ||||||||||
scalar · Integer32 (10..50) · read-write · current Default value is 29. In hundredth of dB.
| |||||||||||||
| SlossConnectors | 1.3.6.1.4.1.2544.1.14.5.9.5 | Integer32 (0..10) | RW | ||||||||||
scalar · Integer32 (0..10) · read-write · current Default value is 5. In tenth of dB.
| |||||||||||||
| SlossSplices | 1.3.6.1.4.1.2544.1.14.5.9.6 | Integer32 (0..10) | RW | ||||||||||
scalar · Integer32 (0..10) · read-write · current Default value is 1. In tenth of dB.
| |||||||||||||
| SnumConnectors | 1.3.6.1.4.1.2544.1.14.5.9.7 | Integer32 (0..20) | RW | ||||||||||
scalar · Integer32 (0..20) · read-write · current Default value is 2. | |||||||||||||
| SnumSplices | 1.3.6.1.4.1.2544.1.14.5.9.8 | Integer32 (0..20) | RW | ||||||||||
scalar · Integer32 (0..20) · read-write · current Default value is 2. | |||||||||||||
| NuserManagement | 1.3.6.1.4.1.2544.1.14.5.10 | ||||||||||||
| TuserManagementTable | 1.3.6.1.4.1.2544.1.14.5.10.1 | NA | |||||||||||
table · not-accessible · current userManagementTable | |||||||||||||
| RuserManagementEntry | 1.3.6.1.4.1.2544.1.14.5.10.1.1 | NA | |||||||||||
| CuserManagementRowStatus | 1.3.6.1.4.1.2544.1.14.5.10.1.1.1 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current RowStatus | |||||||||||||
| CuserManagementUsername | 1.3.6.1.4.1.2544.1.14.5.10.1.1.2 | SnmpAdminString | RC | ||||||||||
column · SnmpAdminString · read-create · current The name string for user authentication purposes | |||||||||||||
| CuserManagementEmailAddress | 1.3.6.1.4.1.2544.1.14.5.10.1.1.3 | SnmpAdminString | RC | ||||||||||
column · SnmpAdminString · read-create · current An email address | |||||||||||||
| CuserManagementPrivilegeLevel | 1.3.6.1.4.1.2544.1.14.5.10.1.1.4 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current
| |||||||||||||
| CuserManagementSecurityLevel | 1.3.6.1.4.1.2544.1.14.5.10.1.1.5 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current
| |||||||||||||
| CuserManagementAuthPrivKey | 1.3.6.1.4.1.2544.1.14.5.10.1.1.6 | SnmpAdminString | RC | ||||||||||
column · SnmpAdminString · read-create · current A human readable string representing the current or new password for user account. Users with administrator privileges can use this object to set the password of other users. | |||||||||||||
| CuserManagementAuthPrivKeyOld | 1.3.6.1.4.1.2544.1.14.5.10.1.1.7 | SnmpAdminString | RC | ||||||||||
column · SnmpAdminString · read-create · current A human readable string representing the old password for user account. This object should be used only for password change procedure. | |||||||||||||
| CuserManagementUdpSessionStatus | 1.3.6.1.4.1.2544.1.14.5.10.1.1.8 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current UDP-based User Session Status
| |||||||||||||
| CuserManagementSso2fa | 1.3.6.1.4.1.2544.1.14.5.10.1.1.9 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current If enabled, user can login only if Single Sign On and 2 Factor Authentication are enabled. This parameter can be set only on user creation.
| |||||||||||||
| CuserManagementSnmpAuthProtocol | 1.3.6.1.4.1.2544.1.14.5.10.1.1.10 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Changes the HMAC for v3 Authentication. Default is MD5. This parameter can be set only on password creation/change.
| |||||||||||||
| CuserManagementPrivacyKeyType | 1.3.6.1.4.1.2544.1.14.5.10.1.1.11 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Defines if SNMP Privacy Key should use a user password as value. Will delete userManagementPrivacyKey if set to authkey.
| |||||||||||||
| CuserManagementPrivacyKey | 1.3.6.1.4.1.2544.1.14.5.10.1.1.12 | SnmpAdminString | RC | ||||||||||
column · SnmpAdminString · read-create · current Privacy key/password for SNMP v3 auth-priv queries encryption. | |||||||||||||
| NexportMgmt | 1.3.6.1.4.1.2544.1.14.5.11 | ||||||||||||
| SexportMgmtRequest | 1.3.6.1.4.1.2544.1.14.5.11.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Set request to initiate software management related action
| |||||||||||||
| SexportMgmtState | 1.3.6.1.4.1.2544.1.14.5.11.2 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The current status of the export process. When failure is set then databaseMgmtLastError is applicable.
| |||||||||||||
| SexportMgmtLastError | 1.3.6.1.4.1.2544.1.14.5.11.3 | INTEGER | RO | ||||||||||
scalar · INTEGER · read-only · current The latest failure of the export process.
Applicable only when exportMgmtLastError is set to 'failure'.
NOTE: All failures that are caused by malfunctioning
hardware are reported as internalError.
| |||||||||||||
| SexportMgmtServerAddress | 1.3.6.1.4.1.2544.1.14.5.11.4 | IpAddress | RW | ||||||||||
scalar · IpAddress · read-write · current The IP address of the external FTP/SCP server. | |||||||||||||
| SexportMgmtServerLogin | 1.3.6.1.4.1.2544.1.14.5.11.5 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current The login name on the external FTP/SCP server. | |||||||||||||
| SexportMgmtServerPasswd | 1.3.6.1.4.1.2544.1.14.5.11.6 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current The password on the external FTP/SCP server. Read requests on this object will return a zero-length string. | |||||||||||||
| SexportMgmtServerDirectory | 1.3.6.1.4.1.2544.1.14.5.11.7 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current The file location (path) on the external FTP/SCP server. | |||||||||||||
| SexportMgmtFileName | 1.3.6.1.4.1.2544.1.14.5.11.8 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current The file name (without path and either without file name extension) on the external FTP/SCP server or the name of the file which has been downloaded to the NE. | |||||||||||||
| SexportMgmtTransferProtocol | 1.3.6.1.4.1.2544.1.14.5.11.9 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current The transfer protocol to be used.
| |||||||||||||
| SexportMgmtFtpPort | 1.3.6.1.4.1.2544.1.14.5.11.10 | Integer32 (0..65535) | RW | ||||||||||
scalar · Integer32 (0..65535) · read-write · current The TCP port number of the FTP server used for file transfer. Default value is 21. | |||||||||||||
| SexportMgmtActionProgress | 1.3.6.1.4.1.2544.1.14.5.11.11 | Integer32 (0..100 | -2147483648) | RO | ||||||||||
scalar · Integer32 (0..100 | -2147483648) · read-only · current Operational progress in % i.e. file transfer
| |||||||||||||
| SexportMgmtIpv6Address | 1.3.6.1.4.1.2544.1.14.5.11.12 | SnmpAdminString | RW | ||||||||||
scalar · SnmpAdminString · read-write · current The IPv6 address of the external FTP/SCP server. | |||||||||||||
| SexportMgmtScpPort | 1.3.6.1.4.1.2544.1.14.5.11.13 | Integer32 (0..65535) | RW | ||||||||||
scalar · Integer32 (0..65535) · read-write · current The TCP port number of the SCP server used for file transfer. Default value is 22. | |||||||||||||
| NbidirSettings | 1.3.6.1.4.1.2544.1.14.5.12 | ||||||||||||
| SbidirSettingsTimeSlotConfig | 1.3.6.1.4.1.2544.1.14.5.12.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This value selects the system-wide configuration about the number of time slots and the time slot used by this ALM unit. numSlots3unitSlot2 (32) means three time slots and the second one is used on this ALM unit.
| |||||||||||||
| SbidirSettingsInactiveUserCmds | 1.3.6.1.4.1.2544.1.14.5.12.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current If this option is enabled it allows users to run tasks during the inactive time slot.
| |||||||||||||
| SdwdmExtraWaitTimeSlot | 1.3.6.1.4.1.2544.1.14.5.12.3 | Integer32 (0..32) | RW | ||||||||||
scalar · Integer32 (0..32) · read-write · current Add extra time before sending out the laser pulse | |||||||||||||
| NremoteAuth | 1.3.6.1.4.1.2544.1.14.5.13 | ||||||||||||
| Sauthmode | 1.3.6.1.4.1.2544.1.14.5.13.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current defines whether a remote authentication is enabled or not and if so which kind of server
| |||||||||||||
| Sloginmode | 1.3.6.1.4.1.2544.1.14.5.13.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current specifies the authentication protocol
| |||||||||||||
| Ssso2fa | 1.3.6.1.4.1.2544.1.14.5.13.3 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current specifies whether single sign on is possible during 2 factor authentication
| |||||||||||||
| TremoteAuthServersTable | 1.3.6.1.4.1.2544.1.14.5.13.4 | NA | |||||||||||
table · not-accessible · current remoteAuthServersTable | |||||||||||||
| RremoteAuthServersEntry | 1.3.6.1.4.1.2544.1.14.5.13.4.1 | NA | |||||||||||
| CremoteAuthServersId | 1.3.6.1.4.1.2544.1.14.5.13.4.1.1 | Integer32 (1..3) | NA | ||||||||||
| CremoteAuthServersIpAddress | 1.3.6.1.4.1.2544.1.14.5.13.4.1.2 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current IpAddresse v4/v6 | |||||||||||||
| CremoteAuthServersPort | 1.3.6.1.4.1.2544.1.14.5.13.4.1.3 | Integer32 (0..65535) | RW | ||||||||||
column · Integer32 (0..65535) · read-write · current The default Radius 1812 /TACACS+ 49. | |||||||||||||
| CremoteAuthServersSecret | 1.3.6.1.4.1.2544.1.14.5.13.4.1.4 | DisplayString | RW | ||||||||||
column · DisplayString · read-write · current secret of the remoteAuthServer | |||||||||||||
| CremoteAuthServersTimeout | 1.3.6.1.4.1.2544.1.14.5.13.4.1.5 | Integer32 (1..10) | RW | ||||||||||
column · Integer32 (1..10) · read-write · current the timeout in seconds (default 3)
| |||||||||||||
| CremoteAuthServersActive | 1.3.6.1.4.1.2544.1.14.5.13.4.1.6 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current
| |||||||||||||
| NprioSettings | 1.3.6.1.4.1.2544.1.14.5.14 | ||||||||||||
| SprioSettingsConfig | 1.3.6.1.4.1.2544.1.14.5.14.1 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current This value enables/disables the system-wide usage of Priority Ports.
| |||||||||||||
| Nmaintain | 1.3.6.1.4.1.2544.1.14.6 | ||||||||||||
| TmaintainTable | 1.3.6.1.4.1.2544.1.14.6.1 | NA | |||||||||||
table · not-accessible · current Table of maintenance actions of monitor ports. | |||||||||||||
| RmaintainEntry | 1.3.6.1.4.1.2544.1.14.6.1.1 | NA | |||||||||||
row · not-accessible · current
| |||||||||||||
| CmaintainOperationRequest | 1.3.6.1.4.1.2544.1.14.6.1.1.1 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set request to initiate OTDR measurement. It can be performed only if portAdminState is in Mgt state except of runOtdrMeasurement (3), runFaultAnalysis (4), runResetMeanValues (7) and runFiberIdentification (10) which can be performed also if portAdminState is in service.
| |||||||||||||
| CmaintainOperationRefractiveIndex | 1.3.6.1.4.1.2544.1.14.6.1.1.2 | Integer32 (1400000..1550000) | RW | ||||||||||
column · Integer32 (1400000..1550000) · read-write · current Refractive index multiplied by 1000000. Parameter must be provided for Fingerprint generation or OTDR measurement. | |||||||||||||
| CmaintainOperationExternalOffset | 1.3.6.1.4.1.2544.1.14.6.1.1.3 | Integer32 (0..100) | RW | ||||||||||
column · Integer32 (0..100) · read-write · current External offset length in meters. Parameter must be provided for Fingerprint generation or OTDR measurement.
| |||||||||||||
| CmaintainOperationCouplerLoss | 1.3.6.1.4.1.2544.1.14.6.1.1.4 | Integer32 (0..100) | RW | ||||||||||
column · Integer32 (0..100) · read-write · current Coupler loss in tenth of dB. Parameter must be provided for Fingerprint generation.
| |||||||||||||
| CmaintainOperationOtdrLength | 1.3.6.1.4.1.2544.1.14.6.1.1.5 | Integer32 (100..200000) | RW | ||||||||||
column · Integer32 (100..200000) · read-write · current Measurement length in meters. Parameter must be provided for OTDR measurement. On 16ALM the allowed range is 100..35000.
| |||||||||||||
| CmaintainOperationOtdrPowerLevel | 1.3.6.1.4.1.2544.1.14.6.1.1.6 | Integer32 (-2000..2000) | RW | ||||||||||
column · Integer32 (-2000..2000) · read-write · current Power level in 0.01dBm. Parameter must be provided for OTDR measurement. Not available on 16ALM-1650D.
| |||||||||||||
| CmaintainOperationOtdrPulseWidth | 1.3.6.1.4.1.2544.1.14.6.1.1.7 | Integer32 (5..20000) | RW | ||||||||||
column · Integer32 (5..20000) · read-write · current Pulse width in ns. Parameter must be provided for OTDR measurement. On 16ALM the allowed range is 25..1000.
| |||||||||||||
| CmaintainOperationOtdrAverageRate | 1.3.6.1.4.1.2544.1.14.6.1.1.8 | Integer32 (0..7) | RW | ||||||||||
column · Integer32 (0..7) · read-write · current Average rate (0=512,1=1024,2=2048,3=4096,4=8192,5=16384,6=32768,7=65536). Parameter must be provided for OTDR measurement. Not available on 16ALM-1650D. | |||||||||||||
| CmaintainOperationState | 1.3.6.1.4.1.2544.1.14.6.1.1.9 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The current status of a measurement. When failure is set then maintainOperationLastError is applicable.
| |||||||||||||
| CmaintainOperationLastError | 1.3.6.1.4.1.2544.1.14.6.1.1.10 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The latest failure of the maintain operation action. Applicable only when maintainOperationState is set to 'failure'.
| |||||||||||||
| CmaintainOperationNumConnectors | 1.3.6.1.4.1.2544.1.14.6.1.1.11 | Integer32 (0..20) | RW | ||||||||||
column · Integer32 (0..20) · read-write · current Default value is taken from system.lossGuidance | |||||||||||||
| CmaintainOperationNumSplices | 1.3.6.1.4.1.2544.1.14.6.1.1.12 | Integer32 (0..20) | RW | ||||||||||
column · Integer32 (0..20) · read-write · current Default value is taken from system.lossGuidance | |||||||||||||
| CmaintainOperationMaxLaserPower | 1.3.6.1.4.1.2544.1.14.6.1.1.13 | Integer32 (-1..1500) | RW | ||||||||||
column · Integer32 (-1..1500) · read-write · current Maximal laser power used for Fingerprint generation or OTDR measurement in 0.01dBm. Parameter must be provided for Fingerprint generation or OTDR measurement. The value '-1' correspond to the maximal laser power. For GPON measurements only values between 4 to 15 dbm are allowed. Not available on 16ALM.
| |||||||||||||
| CmaintainOperationOtdrLinkLength | 1.3.6.1.4.1.2544.1.14.6.1.1.14 | Integer32 (100..300000) | RW | ||||||||||
column · Integer32 (100..300000) · read-write · current Length of the optical link in meters. Parameter must be provided for OTDR measurement (max. 200000 meters) and fingerprint without reflector (max. 300000 meters) and must be greater or equal than maintainOperationOtdrLength. Not available on 16ALM.
| |||||||||||||
| CmaintainOperationOtdrMeasTime | 1.3.6.1.4.1.2544.1.14.6.1.1.15 | Integer32 (15..300) | RW | ||||||||||
column · Integer32 (15..300) · read-write · current Measurement time in seconds. Parameter must be provided for OTDR measurement. Not available on 16ALM.
| |||||||||||||
| CmaintainOperationDwdmMode | 1.3.6.1.4.1.2544.1.14.6.1.1.16 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This variable is set to 'enabled' to allow DWDM measurements else only standard non DWDM measurements can be done.
| |||||||||||||
| CmaintainOperationLossCalculationPoint | 1.3.6.1.4.1.2544.1.14.6.1.1.17 | Integer32 (500..150000 | 0) | RW | ||||||||||
column · Integer32 (500..150000 | 0) · read-write · current Loss between the origin of the optical link and the loss calculation point is used for the bidirectional measurements or other measurements without reflector. Set to 0 to enable maintainOperationExpectedLoss for FingerprintWithoutReflector mode.
| |||||||||||||
| CmaintainOperationFastMode | 1.3.6.1.4.1.2544.1.14.6.1.1.18 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This variable is set to 'enabled' to activate faster OTDR measurements with less accuracy.
| |||||||||||||
| CmaintainOperationMonitoringMode | 1.3.6.1.4.1.2544.1.14.6.1.1.19 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current This variables decides which measurements method will be used for monitoring. Also used the set the Tone Frequency used for runFiberIdentification.
| |||||||||||||
| CmaintainOperationExpectedLoss | 1.3.6.1.4.1.2544.1.14.6.1.1.20 | Integer32 (50..350 | 0) | RW | ||||||||||
column · Integer32 (50..350 | 0) · read-write · current Expected loss in tenth of dB. Between 5 and 35 db. Parameter maintainOperationLossCalculationPoint must be set to 0 for it to be used. | |||||||||||||
| TscheduleFaTable | 1.3.6.1.4.1.2544.1.14.6.2 | NA | |||||||||||
table · not-accessible · current Table of scheduled measurement actions of monitor ports. | |||||||||||||
| RscheduleFaEntry | 1.3.6.1.4.1.2544.1.14.6.2.1 | NA | |||||||||||
row · not-accessible · current
| |||||||||||||
| CscheduleFaFirstRun | 1.3.6.1.4.1.2544.1.14.6.2.1.1 | DateAndTime | RW | ||||||||||
column · DateAndTime · read-write · current Date (UTC) from where the schedule calculation should start. | |||||||||||||
| CscheduleFaInterval | 1.3.6.1.4.1.2544.1.14.6.2.1.2 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Interval between two measurements, will not run if disabled.
| |||||||||||||
| CscheduleFaRequiredState | 1.3.6.1.4.1.2544.1.14.6.2.1.3 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Scheduled Fa Measurement, will only be done if in the right adminstate (default 1 inService)
| |||||||||||||
| CscheduleFaNextRun | 1.3.6.1.4.1.2544.1.14.6.2.1.4 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current Next date (UTC) where scheduled Fa will try to run. | |||||||||||||
| CscheduleFaLastRun | 1.3.6.1.4.1.2544.1.14.6.2.1.5 | DateAndTime | RO | ||||||||||
column · DateAndTime · read-only · current Last date (UTC) where scheduled Fa was executed. | |||||||||||||
| CscheduleFaStatus | 1.3.6.1.4.1.2544.1.14.6.2.1.6 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Status of scheduled Fa Measurement, will rest to idle (1) only at full 1/4 hour intevalls
| |||||||||||||
| NotdrTraceMgmt | 1.3.6.1.4.1.2544.1.14.7 | ||||||||||||
| TotdrTraceMgmtTable | 1.3.6.1.4.1.2544.1.14.7.1 | NA | |||||||||||
table · not-accessible · current Table of trace management of monitor ports. | |||||||||||||
| RotdrTraceMgmtEntry | 1.3.6.1.4.1.2544.1.14.7.1.1 | NA | |||||||||||
row · not-accessible · current
| |||||||||||||
| CotdrTraceMgmtRequest | 1.3.6.1.4.1.2544.1.14.7.1.1.1 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current Set request to initiate trace management related action
| |||||||||||||
| CotdrTraceMgmtState | 1.3.6.1.4.1.2544.1.14.7.1.1.2 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The current status of the export/upload of OTDR traces. When failure is set then otdrTraceMgmtLastError is applicable.
| |||||||||||||
| CotdrTraceMgmtLastError | 1.3.6.1.4.1.2544.1.14.7.1.1.3 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current The latest failure of the export/upload of OTDR traces process.
Applicable only when otdrTraceMgmtState is set to 'failure'.
NOTE: All failures that are caused by malfunctioning
hardware are reported as internalError.
| |||||||||||||
| CotdrTraceMgmtServerAddress | 1.3.6.1.4.1.2544.1.14.7.1.1.4 | IpAddress | RW | ||||||||||
column · IpAddress · read-write · current The IP address of the external FTP/SCP server. | |||||||||||||
| CotdrTraceMgmtServerLogin | 1.3.6.1.4.1.2544.1.14.7.1.1.5 | SnmpAdminString | RW | ||||||||||
column · SnmpAdminString · read-write · current The login name on the external FTP/SCP server. | |||||||||||||
| CotdrTraceMgmtServerPasswd | 1.3.6.1.4.1.2544.1.14.7.1.1.6 | SnmpAdminString | RW | ||||||||||
column · SnmpAdminString · read-write · current The password on the external FTP/SCP server. Read requests on this object will return a zero-length string. | |||||||||||||
| CotdrTraceMgmtServerDirectory | 1.3.6.1.4.1.2544.1.14.7.1.1.7 | SnmpAdminString | RW | ||||||||||
column · SnmpAdminString · read-write · current The OTDR trace destination location (path) on the external FTP/SCP server. | |||||||||||||
| CotdrTraceMgmtFileName | 1.3.6.1.4.1.2544.1.14.7.1.1.8 | SnmpAdminString | RW | ||||||||||
column · SnmpAdminString · read-write · current Target File Name of the trace without extension. Extension is either 'sor' or 'csv'. Depends on the selected OTDR Trace Management Request | |||||||||||||
| CotdrTraceMgmtTransferProtocol | 1.3.6.1.4.1.2544.1.14.7.1.1.9 | INTEGER | RW | ||||||||||
column · INTEGER · read-write · current The transfer protocol to be used.
| |||||||||||||
| CotdrTraceMgmtFtpPort | 1.3.6.1.4.1.2544.1.14.7.1.1.10 | Integer32 (0..65535) | RW | ||||||||||
column · Integer32 (0..65535) · read-write · current The TCP port number of the FTP server used for file transfer. Default value is 21. | |||||||||||||
| CotdrTraceMgmtActionProgress | 1.3.6.1.4.1.2544.1.14.7.1.1.11 | Integer32 (0..100 | -2147483648) | RO | ||||||||||
column · Integer32 (0..100 | -2147483648) · read-only · current Operational progress in % i.e. file transfer
| |||||||||||||
| CotdrTraceMgmtAutoFaReference | 1.3.6.1.4.1.2544.1.14.7.1.1.12 | Integer32 (0..2147483647) | RW | ||||||||||
column · Integer32 (0..2147483647) · read-write · current Fault Analysis reference number. A value of 0 means the latest auto-generated fault analysis is exported. | |||||||||||||
| CotdrTraceMgmtIpv6Address | 1.3.6.1.4.1.2544.1.14.7.1.1.13 | SnmpAdminString | RW | ||||||||||
column · SnmpAdminString · read-write · current The IPv6 address of the external FTP/SCP server. | |||||||||||||
| CotdrTraceMgmtScpPort | 1.3.6.1.4.1.2544.1.14.7.1.1.14 | Integer32 (0..65535) | RW | ||||||||||
column · Integer32 (0..65535) · read-write · current The TCP port number of the SCP server used for file transfer. Default value is 22. | |||||||||||||
| Ninventory | 1.3.6.1.4.1.2544.1.14.8 | ||||||||||||
| TinventoryTable | 1.3.6.1.4.1.2544.1.14.8.1 | NA | |||||||||||
table · not-accessible · current Inventory table | |||||||||||||
| RinventoryEntry | 1.3.6.1.4.1.2544.1.14.8.1.1 | NA | |||||||||||
row · not-accessible · current | |||||||||||||
| CinventoryShelfNo | 1.3.6.1.4.1.2544.1.14.8.1.1.1 | Integer32 (0..8) | NA | ||||||||||
column · Integer32 (0..8) · not-accessible · current Shelf number: 0 for the ALM itself, 1 .. 8 for Port Extenders | |||||||||||||
| CinventorySlotNo | 1.3.6.1.4.1.2544.1.14.8.1.1.2 | Integer32 (0) | NA | ||||||||||
column · Integer32 (0) · not-accessible · current Adress index. | |||||||||||||
| CinventoryPortNo | 1.3.6.1.4.1.2544.1.14.8.1.1.3 | Integer32 (0) | NA | ||||||||||
column · Integer32 (0) · not-accessible · current Adress index. | |||||||||||||
| CinventoryExtNo | 1.3.6.1.4.1.2544.1.14.8.1.1.4 | Integer32 (0) | NA | ||||||||||
column · Integer32 (0) · not-accessible · current Adress index. | |||||||||||||
| CinventoryClassName | 1.3.6.1.4.1.2544.1.14.8.1.1.5 | Integer32 (2) | NA | ||||||||||
column · Integer32 (2) · not-accessible · current Entity Class Name. | |||||||||||||
| CinventoryAidString | 1.3.6.1.4.1.2544.1.14.8.1.1.6 | IdentityTranslation | RO | ||||||||||
column · IdentityTranslation · read-only · current AID: SHMON-1 or SHEXT-1 ... SHEXT-8 | |||||||||||||
| CinventoryUnitName | 1.3.6.1.4.1.2544.1.14.8.1.1.7 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current Official Equipment Name | |||||||||||||
| CinventoryFirmwarePackageRev | 1.3.6.1.4.1.2544.1.14.8.1.1.8 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current Firmware Package Revision Number | |||||||||||||
| CinventoryHardwareRev | 1.3.6.1.4.1.2544.1.14.8.1.1.9 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current Equipment Revision Number | |||||||||||||
| CinventoryFpgaRev | 1.3.6.1.4.1.2544.1.14.8.1.1.10 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current The active FPGA version on the Unit | |||||||||||||
| CinventorySerialNumber | 1.3.6.1.4.1.2544.1.14.8.1.1.11 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current Equipment Serial Number | |||||||||||||
| CinventoryPartNumber | 1.3.6.1.4.1.2544.1.14.8.1.1.12 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current Part Number | |||||||||||||
| CinventoryCleiCode | 1.3.6.1.4.1.2544.1.14.8.1.1.13 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current Common Language Equipment Identifier | |||||||||||||
| CinventoryOrigin | 1.3.6.1.4.1.2544.1.14.8.1.1.14 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current Either Vendor Code for the ALM itself or Country of Origin Code for Port Extenders | |||||||||||||
| CinventoryShelfType | 1.3.6.1.4.1.2544.1.14.8.1.1.15 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current Type of the physical entity | |||||||||||||
| CinventoryUniversalSerialIdent | 1.3.6.1.4.1.2544.1.14.8.1.1.16 | SnmpAdminString | RO | ||||||||||
column · SnmpAdminString · read-only · current Unique Serial Identifier | |||||||||||||
Textual conventions
Fsp3000almAlarmListTypeINTEGERalarmAddDropLinkLossDev(100)alarmAddDropLinkLossHigh(99)alarmAlmPackageMismatch(56)alarmAttenuationHigh(107)alarmBadSysStat(48)alarmCertExceeded(96)alarmCertNearlyExceeded(97)alarmDisabledState(17)alarmEmailNotifyAddDropLinkLossDev(102)alarmEmailNotifyAddDropLinkLossHigh(101)alarmEmailNotifyLinkBudgetExceeded(60)alarmEmailNotifyLinkBudgetNearlyExceeded(61)alarmEmailNotifyLossDeviationHigh(85)alarmEmailNotifyLossHigh(86)alarmEmailNotifyRootLinkFault(82)alarmEmailNotifySensor1High(87)alarmEmailNotifySensor2High(88)alarmEmailNotifyThresCrossedFast(57)alarmEmailNotifyThresCrossedMedium(58)alarmEmailNotifyThresCrossedSlow(59)alarmEmulationMode(89)alarmEquipmentFault(106)alarmEquipmentRemoved(105)alarmFaRunning(9)alarmFpMissing(10)alarmFpRunning(8)alarmLinkBudgetExceeded(14)alarmLinkBudgetNearlyExceeded(15)alarmLossDeviationHigh(66)alarmLossHigh(67)alarmManagementState(16)alarmMonNotRunning(7)alarmMonProcNotRunning(50)alarmNtpServerUnreachable(33)alarmRebootRunning(46)alarmRootLinkFault(68)alarmSensor1High(80)alarmSensor2High(81)alarmTempBoard1(2)alarmTempBoard2High(4)alarmTempBoard2Low(3)alarmTempCPU(1)alarmTempLaserHigh(6)alarmTempLaserLow(5)alarmThresCrossedFast(11)alarmThresCrossedMedium(12)alarmThresCrossedSlow(13)alarmTopologyChanged(84)alarmTrafficOutage(72)alarmWarmupRunning(47)alarmWrongFWVersion(49)authenticationNotification(62)authenticationNotificationSummary(63)customizedFpEventCreated(75)customizedFpEventDeleted(76)internalExtensionChannelCreated(108)internalExtensionChannelDeleted(109)monitorPointCreated(64)monitorPointDeleted(65)objectChangedTrap(19)portExtenderCreated(110)portExtenderDeleted(111)segmentCreated(103)segmentDeleted(104)stateChangedTrap(18)transient15MinMeasCollected(22)transient1DayMeasCollected(23)transientDbMgmtActionCompleted(31)transientDbMgmtActionFailed(32)transientDbMgmtActionStarted(30)transientExportMgmtActionCompleted(78)transientExportMgmtActionFailed(79)transientExportMgmtActionStarted(77)transientFaCompleted(42)transientFaDeleted(51)transientFaFailed(43)transientFaSaved(44)transientFaStarted(41)transientFiberIdentifierCompleted(91)transientFiberIdentifierFailed(92)transientFiberIdentifierStarted(90)transientFpCompleted(25)transientFpFailed(26)transientFpSaved(34)transientFpStarted(24)transientInternalError(45)transientLinkChanged(98)transientMonStarted(35)transientMonStopped(36)transientOtdrMeasurementCompleted(38)transientOtdrMeasurementDeleted(52)transientOtdrMeasurementFailed(39)transientOtdrMeasurementSaved(40)transientOtdrMeasurementStarted(37)transientOtdrTraceMgmtActionCompleted(54)transientOtdrTraceMgmtActionFailed(55)transientOtdrTraceMgmtActionStarted(53)transientPkiCertRequestCompleted(94)transientPkiCertRequestFailed(95)transientPkiCertRequestStarted(93)transientResetMeansCompleted(70)transientResetMeansFailed(71)transientResetMeansStarted(69)transientSwMgmtActionCompleted(28)transientSwMgmtActionFailed(29)transientSwMgmtActionStarted(27)transientTimeChange(83)trapsinkCreatedTrap(20)trapsinkDeletedTrap(21)userAdded(73)userDeleted(74)
Traps / Notifications
- alarmAddDropLinkLossDev
1.3.6.1.4.1.2544.1.14.0.100 - alarmAddDropLinkLossHigh
1.3.6.1.4.1.2544.1.14.0.99 - alarmAlmPackageMismatch
1.3.6.1.4.1.2544.1.14.0.56 - alarmAttenuationHigh
1.3.6.1.4.1.2544.1.14.0.107 - alarmBadSysStat
1.3.6.1.4.1.2544.1.14.0.48 - alarmCertExceeded
1.3.6.1.4.1.2544.1.14.0.96 - alarmCertNearlyExceeded
1.3.6.1.4.1.2544.1.14.0.97 - alarmDisabledState
1.3.6.1.4.1.2544.1.14.0.17 - alarmEmailNotifyAddDropLinkLossDev
1.3.6.1.4.1.2544.1.14.0.102 - alarmEmailNotifyAddDropLinkLossHigh
1.3.6.1.4.1.2544.1.14.0.101 - alarmEmailNotifyLinkBudgetExceeded
1.3.6.1.4.1.2544.1.14.0.60 - alarmEmailNotifyLinkBudgetNearlyExceeded
1.3.6.1.4.1.2544.1.14.0.61 - alarmEmailNotifyLossDeviationHigh
1.3.6.1.4.1.2544.1.14.0.85 - alarmEmailNotifyLossHigh
1.3.6.1.4.1.2544.1.14.0.86 - alarmEmailNotifyRootLinkFault
1.3.6.1.4.1.2544.1.14.0.82 - alarmEmailNotifySensor1High
1.3.6.1.4.1.2544.1.14.0.87 - alarmEmailNotifySensor2High
1.3.6.1.4.1.2544.1.14.0.88 - alarmEmailNotifyThresCrossedFast
1.3.6.1.4.1.2544.1.14.0.57 - alarmEmailNotifyThresCrossedMedium
1.3.6.1.4.1.2544.1.14.0.58 - alarmEmailNotifyThresCrossedSlow
1.3.6.1.4.1.2544.1.14.0.59 - alarmEmulationMode
1.3.6.1.4.1.2544.1.14.0.89 - alarmEquipmentFault
1.3.6.1.4.1.2544.1.14.0.106 - alarmEquipmentRemoved
1.3.6.1.4.1.2544.1.14.0.105 - alarmFaRunning
1.3.6.1.4.1.2544.1.14.0.9 - alarmFpMissing
1.3.6.1.4.1.2544.1.14.0.10 - alarmFpRunning
1.3.6.1.4.1.2544.1.14.0.8 - alarmLinkBudgetExceeded
1.3.6.1.4.1.2544.1.14.0.14 - alarmLinkBudgetNearlyExceeded
1.3.6.1.4.1.2544.1.14.0.15 - alarmLossDeviationHigh
1.3.6.1.4.1.2544.1.14.0.66 - alarmLossHigh
1.3.6.1.4.1.2544.1.14.0.67 - alarmManagementState
1.3.6.1.4.1.2544.1.14.0.16 - alarmMonNotRunning
1.3.6.1.4.1.2544.1.14.0.7 - alarmMonProcNotRunning
1.3.6.1.4.1.2544.1.14.0.50 - alarmNtpServerUnreachable
1.3.6.1.4.1.2544.1.14.0.33 - alarmRebootRunning
1.3.6.1.4.1.2544.1.14.0.46 - alarmRootLinkFault
1.3.6.1.4.1.2544.1.14.0.68 - alarmSensor1High
1.3.6.1.4.1.2544.1.14.0.80 - alarmSensor2High
1.3.6.1.4.1.2544.1.14.0.81 - alarmTempBoard1
1.3.6.1.4.1.2544.1.14.0.2 - alarmTempBoard2High
1.3.6.1.4.1.2544.1.14.0.4 - alarmTempBoard2Low
1.3.6.1.4.1.2544.1.14.0.3 - alarmTempCPU
1.3.6.1.4.1.2544.1.14.0.1 - alarmTempLaserHigh
1.3.6.1.4.1.2544.1.14.0.6 - alarmTempLaserLow
1.3.6.1.4.1.2544.1.14.0.5 - alarmThresCrossedFast
1.3.6.1.4.1.2544.1.14.0.11 - alarmThresCrossedMedium
1.3.6.1.4.1.2544.1.14.0.12 - alarmThresCrossedSlow
1.3.6.1.4.1.2544.1.14.0.13 - alarmTopologyChanged
1.3.6.1.4.1.2544.1.14.0.84 - alarmTrafficOutage
1.3.6.1.4.1.2544.1.14.0.72 - alarmWarmupRunning
1.3.6.1.4.1.2544.1.14.0.47 - alarmWrongFWVersion
1.3.6.1.4.1.2544.1.14.0.49 - authenticationNotification
1.3.6.1.4.1.2544.1.14.0.62 - authenticationNotificationSummary
1.3.6.1.4.1.2544.1.14.0.63 - customizedFpEventCreated
1.3.6.1.4.1.2544.1.14.0.75 - customizedFpEventDeleted
1.3.6.1.4.1.2544.1.14.0.76 - internalExtensionChannelCreated
1.3.6.1.4.1.2544.1.14.0.108 - internalExtensionChannelDeleted
1.3.6.1.4.1.2544.1.14.0.109 - monitorPointCreated
1.3.6.1.4.1.2544.1.14.0.64 - monitorPointDeleted
1.3.6.1.4.1.2544.1.14.0.65 - objectChangedTrap
1.3.6.1.4.1.2544.1.14.0.19 - portExtenderCreated
1.3.6.1.4.1.2544.1.14.0.110 - portExtenderDeleted
1.3.6.1.4.1.2544.1.14.0.111 - segmentCreated
1.3.6.1.4.1.2544.1.14.0.103 - segmentDeleted
1.3.6.1.4.1.2544.1.14.0.104 - stateChangedTrap
1.3.6.1.4.1.2544.1.14.0.18 - transient15MinMeasCollected
1.3.6.1.4.1.2544.1.14.0.22 - transient1DayMeasCollected
1.3.6.1.4.1.2544.1.14.0.23 - transientDbMgmtActionCompleted
1.3.6.1.4.1.2544.1.14.0.31 - transientDbMgmtActionFailed
1.3.6.1.4.1.2544.1.14.0.32 - transientDbMgmtActionStarted
1.3.6.1.4.1.2544.1.14.0.30 - transientExportMgmtActionCompleted
1.3.6.1.4.1.2544.1.14.0.78 - transientExportMgmtActionFailed
1.3.6.1.4.1.2544.1.14.0.79 - transientExportMgmtActionStarted
1.3.6.1.4.1.2544.1.14.0.77 - transientFaCompleted
1.3.6.1.4.1.2544.1.14.0.42 - transientFaDeleted
1.3.6.1.4.1.2544.1.14.0.51 - transientFaFailed
1.3.6.1.4.1.2544.1.14.0.43 - transientFaSaved
1.3.6.1.4.1.2544.1.14.0.44 - transientFaStarted
1.3.6.1.4.1.2544.1.14.0.41 - transientFiberIdentifierCompleted
1.3.6.1.4.1.2544.1.14.0.91 - transientFiberIdentifierFailed
1.3.6.1.4.1.2544.1.14.0.92 - transientFiberIdentifierStarted
1.3.6.1.4.1.2544.1.14.0.90 - transientFpCompleted
1.3.6.1.4.1.2544.1.14.0.25 - transientFpFailed
1.3.6.1.4.1.2544.1.14.0.26 - transientFpSaved
1.3.6.1.4.1.2544.1.14.0.34 - transientFpStarted
1.3.6.1.4.1.2544.1.14.0.24 - transientInternalError
1.3.6.1.4.1.2544.1.14.0.45 - transientLinkChanged
1.3.6.1.4.1.2544.1.14.0.98 - transientMonStarted
1.3.6.1.4.1.2544.1.14.0.35 - transientMonStopped
1.3.6.1.4.1.2544.1.14.0.36 - transientOtdrMeasurementCompleted
1.3.6.1.4.1.2544.1.14.0.38 - transientOtdrMeasurementDeleted
1.3.6.1.4.1.2544.1.14.0.52 - transientOtdrMeasurementFailed
1.3.6.1.4.1.2544.1.14.0.39 - transientOtdrMeasurementSaved
1.3.6.1.4.1.2544.1.14.0.40 - transientOtdrMeasurementStarted
1.3.6.1.4.1.2544.1.14.0.37 - transientOtdrTraceMgmtActionCompleted
1.3.6.1.4.1.2544.1.14.0.54 - transientOtdrTraceMgmtActionFailed
1.3.6.1.4.1.2544.1.14.0.55 - transientOtdrTraceMgmtActionStarted
1.3.6.1.4.1.2544.1.14.0.53 - transientPkiCertRequestCompleted
1.3.6.1.4.1.2544.1.14.0.94 - transientPkiCertRequestFailed
1.3.6.1.4.1.2544.1.14.0.95 - transientPkiCertRequestStarted
1.3.6.1.4.1.2544.1.14.0.93 - transientResetMeansCompleted
1.3.6.1.4.1.2544.1.14.0.70 - transientResetMeansFailed
1.3.6.1.4.1.2544.1.14.0.71 - transientResetMeansStarted
1.3.6.1.4.1.2544.1.14.0.69 - transientSwMgmtActionCompleted
1.3.6.1.4.1.2544.1.14.0.28 - transientSwMgmtActionFailed
1.3.6.1.4.1.2544.1.14.0.29 - transientSwMgmtActionStarted
1.3.6.1.4.1.2544.1.14.0.27 - transientTimeChange
1.3.6.1.4.1.2544.1.14.0.83 - trapsinkCreatedTrap
1.3.6.1.4.1.2544.1.14.0.20 - trapsinkDeletedTrap
1.3.6.1.4.1.2544.1.14.0.21 - userAdded
1.3.6.1.4.1.2544.1.14.0.73 - userDeleted
1.3.6.1.4.1.2544.1.14.0.74