ADTRAN-AOSCPU
AdtranThis MIB contains information regarding CPU utilization, Memory usage and system process status.
snmptranslate -m ADTRAN-AOSCPU -Tpsnmpwalk -v2c -c <community> -m ADTRAN-AOSCPU <host> 1.3.6.1.4.1.664.6.10000.4Imports
| ADTRAN-AOS | adGenAOSCommon, adGenAOSConformance |
|---|---|
| ADTRAN-MIB | adIdentityShared |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-MIB | sysName |
| SNMPv2-SMI | Bits, Gauge32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| NadGenAOSCpuUtil | 1.3.6.1.4.1.664.5.53.1.4 | ||||||||||||
| NadGenAOSResUtilThreshTraps | 1.3.6.1.4.1.664.5.53.1.4.0 | ||||||||||||
node · current These traps indicate that a resource's utilization status has changed respective of a set threshold value. There are two types of traps, Alarm and Normal. The traps will return the adGenAOSResUtilThreshTable indices and the number of seconds since epoch as a timestamp indicating when the utilization status changed. The timestamp value is indicative of when the utilization status changed an not when the trap was sent. | |||||||||||||
| !adGenAOSResUtilThreshAlarm | 1.3.6.1.4.1.664.5.53.1.4.0.1 | ||||||||||||
notification · current This trap indicates the resource utilization exceeded the set threshold value for the entirety of the set time interval. The specific resource utilization is specified via the indexes adGenAOSResType, adGenAOSResUtilThresh, and adGenAOSResUtilTimeInterval. The adGenAOSResUtilThreshTimestamp indicates when this condition occurred and not necessarily when the trap was sent. The sysName is the exact same as defined in SNMPv2-MIB. | |||||||||||||
| !adGenAOSResUtilThreshNormal | 1.3.6.1.4.1.664.5.53.1.4.0.2 | ||||||||||||
notification · current This trap indicates the resource utilization has been in a normal (non-alarm) state for at least 5 seconds. This condition can only occur after the alarm state has been triggered. The specific resource utilization is specified via the indexes adGenAOSResType, adGenAOSResUtilThresh, and adGenAOSResUtilTimeInterval. The adGenAOSResUtilThreshTimestamp indicates when this condition occurred and not necessarily when the trap was sent.The sysName is the exact same as defined in SNMPv2-MIB. | |||||||||||||
| SadGenAOSCurrentCpuUtil | 1.3.6.1.4.1.664.5.53.1.4.1 | Gauge32 (0..100) | RO | 42 | |||||||||
scalar · Gauge32 (0..100) · read-only · current Average CPU utilization over the last second. Example values from LibreNMS test devices
| |||||||||||||
| SadGenAOSClearUtilizationStats | 1.3.6.1.4.1.664.5.53.1.4.2 | INTEGER | RW | ||||||||||
scalar · INTEGER · read-write · current Set value to 1 to clear CPU utilization statistics.
| |||||||||||||
| SadGenAOS1MinCpuUtil | 1.3.6.1.4.1.664.5.53.1.4.3 | Gauge32 (0..100) | RO | ||||||||||
scalar · Gauge32 (0..100) · read-only · current Average CPU utilization over the last minute. | |||||||||||||
| SadGenAOS5MinCpuUtil | 1.3.6.1.4.1.664.5.53.1.4.4 | Gauge32 (0..100) | RO | ||||||||||
scalar · Gauge32 (0..100) · read-only · current Average CPU utilization over the last 5 minutes. | |||||||||||||
| SadGenAOSMaxCpuUtil | 1.3.6.1.4.1.664.5.53.1.4.5 | Gauge32 (0..100) | RO | ||||||||||
scalar · Gauge32 (0..100) · read-only · current Maximum CPU utilization since last system reboot or statistics reset. | |||||||||||||
| SadGenAOSMemPool | 1.3.6.1.4.1.664.5.53.1.4.6 | Gauge32 | RO | 67108863 | |||||||||
scalar · Gauge32 · read-only · current Total memory pool available. Example values from LibreNMS test devices
| |||||||||||||
| SadGenAOSHeapSize | 1.3.6.1.4.1.664.5.53.1.4.7 | Gauge32 | RO | 39853040 | |||||||||
scalar · Gauge32 · read-only · current Total Heap size. This is the amount of memory available after the code is decompressed and packet buffers are allocated. Example values from LibreNMS test devices
| |||||||||||||
| SadGenAOSHeapFree | 1.3.6.1.4.1.664.5.53.1.4.8 | Gauge32 | RO | 25979888 | |||||||||
scalar · Gauge32 · read-only · current Current amount of heap available for use. Example values from LibreNMS test devices
| |||||||||||||
| TadGenAOSProcessTable | 1.3.6.1.4.1.664.5.53.1.4.9 | NA | |||||||||||
table · not-accessible · current A table reporting the current run state of all current processes. | |||||||||||||
| RadGenAOSProcessEntry | 1.3.6.1.4.1.664.5.53.1.4.9.1 | NA | |||||||||||
row · not-accessible · current Each entry in the list is a current system process.
| |||||||||||||
| CadGenAOSProcID | 1.3.6.1.4.1.664.5.53.1.4.9.1.1 | Integer32 (0..65535) | NA | ||||||||||
column · Integer32 (0..65535) · not-accessible · current Unique indentifier for the process. | |||||||||||||
| CadGenAOSProcName | 1.3.6.1.4.1.664.5.53.1.4.9.1.2 | DisplayString | RO | ||||||||||
column · DisplayString · read-only · current System process name. | |||||||||||||
| CadGenAOSProcPriority | 1.3.6.1.4.1.664.5.53.1.4.9.1.3 | Integer32 (0..255) | RO | ||||||||||
column · Integer32 (0..255) · read-only · current Current system process priority. | |||||||||||||
| CadGenAOSProcState | 1.3.6.1.4.1.664.5.53.1.4.9.1.4 | INTEGER | RO | ||||||||||
column · INTEGER · read-only · current Current system process state.
| |||||||||||||
| CadGenAOSProcCount | 1.3.6.1.4.1.664.5.53.1.4.9.1.5 | Gauge32 (0..4294967295) | RO | ||||||||||
column · Gauge32 (0..4294967295) · read-only · current Current number of times the process has been invoked. | |||||||||||||
| CadGenAOSProcExecTime | 1.3.6.1.4.1.664.5.53.1.4.9.1.6 | Gauge32 (0..4294967295) | RO | ||||||||||
column · Gauge32 (0..4294967295) · read-only · current Total amount of time spent executing this process. Result is in usec. | |||||||||||||
| CadGenAOSProcRunTime | 1.3.6.1.4.1.664.5.53.1.4.9.1.7 | Gauge32 (0..4294967295) | RO | ||||||||||
column · Gauge32 (0..4294967295) · read-only · current Total amount of time spent executing this process. Result is in usec. | |||||||||||||
| CadGenAOSProc1SecLd | 1.3.6.1.4.1.664.5.53.1.4.9.1.8 | Gauge32 (0..100) | RO | ||||||||||
column · Gauge32 (0..100) · read-only · current Percent system utilization for the process. | |||||||||||||
| TadGenAOSResUtilThreshTable | 1.3.6.1.4.1.664.5.53.1.4.10 | NA | |||||||||||
table · not-accessible · current A table reporting the current resource utilization threshold traps with abilities to configure the traps. The table supports create and destroy. To prevent abuse, the table will not support row creation once 20 or more entries exist within the table. | |||||||||||||
| RadGenAOSResUtilThreshEntry | 1.3.6.1.4.1.664.5.53.1.4.10.1 | NA | |||||||||||
row · not-accessible · current Each entry in the table represents a current resource utilization threshold notification. The entry is composed of an enumerated integer representing the resource type, the numerical threshold and time interval settings. All entries are immutable and all columns are required for create. | |||||||||||||
| CadGenAOSResType | 1.3.6.1.4.1.664.5.53.1.4.10.1.1 | INTEGER | RC | ||||||||||
column · INTEGER · read-create · current Indentifier specifying the resource type. Resource notes: (2) Heap - The heap resource will only display a time interval value of 1. Setting the value to a valid time interval value will always result in the inherent default value of 1. A heap notification will occur whenever the threshold is exceeded.
| |||||||||||||
| CadGenAOSResUtilThresh | 1.3.6.1.4.1.664.5.53.1.4.10.1.2 | Gauge32 (1..100) | RC | ||||||||||
column · Gauge32 (1..100) · read-create · current The utilization threshold value expressed as a whole number percentage. | |||||||||||||
| CadGenAOSResUtilTimeInterval | 1.3.6.1.4.1.664.5.53.1.4.10.1.3 | Gauge32 (1..86400) | RC | ||||||||||
column · Gauge32 (1..86400) · read-create · current Time interval in seconds for actual to exceed threshold. | |||||||||||||
| CadGenAOSResUtilThreshRowStatus | 1.3.6.1.4.1.664.5.53.1.4.10.1.4 | RowStatus | RC | ||||||||||
column · RowStatus · read-create · current RowStatus column for this table. Since each entry is immutable the only acceptable RowStatus values (for set) are createAndGo(4) and destroy(6). The only acceptable RowStatus value for get is active(1). | |||||||||||||
| SadGenAOSResUtilThreshTimestamp | 1.3.6.1.4.1.664.5.53.1.4.11 | Unsigned32 | AN | ||||||||||
scalar · Unsigned32 · accessible-for-notify · current The time (seconds since epoch) that a resource utilization threshold trap condition occurred and not necessarily the when the trap was sent. | |||||||||||||
| NadGenAOSCpuConformance | 1.3.6.1.4.1.664.5.53.99.4 | ||||||||||||
| NadAOSCpuCompliances | 1.3.6.1.4.1.664.5.53.99.4.1 | ||||||||||||
| MadAOSCompliance | 1.3.6.1.4.1.664.5.53.99.4.1.1 | ||||||||||||
compliance · current The compliance statement for SNMPv2 entities which implement the adAosCPU.mib | |||||||||||||
| NadAOSCpuGroups | 1.3.6.1.4.1.664.5.53.99.4.2 | ||||||||||||
| GadGenAOSCpuGroup | 1.3.6.1.4.1.664.5.53.99.4.2.1 | ||||||||||||
group · current The Unit SNMP Config Group. | |||||||||||||
| GadGenAOSProcessGroup | 1.3.6.1.4.1.664.5.53.99.4.2.2 | ||||||||||||
group · current This group is used to report the status of current processes. | |||||||||||||
| GadGenAOSThresholdGroup | 1.3.6.1.4.1.664.5.53.99.4.2.3 | ||||||||||||
group · current The threshold config group. Contains objects to set and get the threshold and time interval to trigger a trap. | |||||||||||||
| GadGenAOSThresholdTrapGroup | 1.3.6.1.4.1.664.5.53.99.4.2.4 | ||||||||||||
group · current Traps which may be used to enhance event driven management of the CPU. | |||||||||||||
| IadGenAOSCpuUtilMib | 1.3.6.1.4.1.664.6.10000.4 | ||||||||||||
identity This MIB contains information regarding CPU utilization, Memory usage and system process status. | |||||||||||||
Traps / Notifications
- adGenAOSResUtilThreshAlarm
1.3.6.1.4.1.664.5.53.1.4.0.1 - adGenAOSResUtilThreshNormal
1.3.6.1.4.1.664.5.53.1.4.0.2