ACD-FILTER-MIB
accedian, Inc.The Filter database for this Accedian Networks device.
snmptranslate -m ACD-FILTER-MIB -Tpsnmpwalk -v2c -c <community> -m ACD-FILTER-MIB <host> 1.3.6.1.4.1.22420.2.2Imports
| ACCEDIAN-SMI | acdMibs |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, MacAddress, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| IacdFilter | 1.3.6.1.4.1.22420.2.2 | |||
identity The Filter database for this Accedian Networks device. | ||||
| TacdL2FilterTable | 1.3.6.1.4.1.22420.2.2.1 | NA | deprecated | |
table · not-accessible · deprecated Table of all Layer 2 filters | ||||
| RacdL2FilterEntry | 1.3.6.1.4.1.22420.2.2.1.1 | NA | ||
row · not-accessible · current A Filter is a pattern matching a definition against packets.
| ||||
| CacdL2FilterID | 1.3.6.1.4.1.22420.2.2.1.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current Unique value for each filter. Its value ranges from 1 to maximum value. This maximum value depend of the type of platform. | ||||
| CacdL2FilterName | 1.3.6.1.4.1.22420.2.2.1.1.2 | DisplayString (SIZE (1..31)) | RC | |
column · DisplayString (SIZE (1..31)) · read-create · current This is a string to identify the filter. | ||||
| CacdL2FilterMacDstEn | 1.3.6.1.4.1.22420.2.2.1.1.3 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the destination MAC address check. | ||||
| CacdL2FilterMacDst | 1.3.6.1.4.1.22420.2.2.1.1.4 | MacAddress | RC | |
column · MacAddress · read-create · current The destination MAC address used to compare the incoming traffic. | ||||
| CacdL2FilterMacDstMask | 1.3.6.1.4.1.22420.2.2.1.1.5 | Unsigned32 (0..48) | RC | |
column · Unsigned32 (0..48) · read-create · current Number of destination MAC address bits to compare. Its value ranges from 0 to 48. Only specific mask are valid per platform. | ||||
| CacdL2FilterMacSrcEn | 1.3.6.1.4.1.22420.2.2.1.1.6 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the source MAC address check. | ||||
| CacdL2FilterMacSrc | 1.3.6.1.4.1.22420.2.2.1.1.7 | MacAddress | RC | |
column · MacAddress · read-create · current The source MAC address used to compare the incoming traffic. | ||||
| CacdL2FilterMacSrcMask | 1.3.6.1.4.1.22420.2.2.1.1.8 | Unsigned32 (0..48) | RC | |
column · Unsigned32 (0..48) · read-create · current Number of source MAC address bits to compare. Its value ranges from 0 to 48. Only specific mask are valid per platform. | ||||
| CacdL2FilterEtypeEn | 1.3.6.1.4.1.22420.2.2.1.1.9 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the Ethernet type check. | ||||
| CacdL2FilterEtype | 1.3.6.1.4.1.22420.2.2.1.1.10 | Unsigned32 (0..65535) | RC | |
column · Unsigned32 (0..65535) · read-create · current The Ethernet type used to compare the incoming traffic. | ||||
| CacdL2FilterVlan1PriorEn | 1.3.6.1.4.1.22420.2.2.1.1.11 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the first VLAN priority check. | ||||
| CacdL2FilterVlan1Prior | 1.3.6.1.4.1.22420.2.2.1.1.12 | Unsigned32 (0..7) | RC | |
column · Unsigned32 (0..7) · read-create · current The first VLAN priority used to compare the incoming traffic. Its value ranges from 0 to 7. | ||||
| CacdL2FilterVlan1CfiEn | 1.3.6.1.4.1.22420.2.2.1.1.13 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the first VLAN CFI check. | ||||
| CacdL2FilterVlan1Cfi | 1.3.6.1.4.1.22420.2.2.1.1.14 | Unsigned32 (0..1) | RC | |
column · Unsigned32 (0..1) · read-create · current The first VLAN CFI used to compare the incoming traffic. Its value is 0 or 1. | ||||
| CacdL2FilterVlan1IdEn | 1.3.6.1.4.1.22420.2.2.1.1.15 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the first VLAN ID check. | ||||
| CacdL2FilterVlan1Id | 1.3.6.1.4.1.22420.2.2.1.1.16 | Unsigned32 (0..4095) | RC | |
column · Unsigned32 (0..4095) · read-create · current The first VLAN ID used to compare the incoming traffic. Its value ranges from 0 to 4095. | ||||
| CacdL2FilterVlan2PriorEn | 1.3.6.1.4.1.22420.2.2.1.1.17 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the second VLAN priority check. | ||||
| CacdL2FilterVlan2Prior | 1.3.6.1.4.1.22420.2.2.1.1.18 | Unsigned32 (0..7) | RC | |
column · Unsigned32 (0..7) · read-create · current The second VLAN priority used to compare the incoming traffic. Its value ranges from 0 to 7. | ||||
| CacdL2FilterVlan2CfiEn | 1.3.6.1.4.1.22420.2.2.1.1.19 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the second VLAN CFI check. | ||||
| CacdL2FilterVlan2Cfi | 1.3.6.1.4.1.22420.2.2.1.1.20 | Unsigned32 (0..1) | RC | |
column · Unsigned32 (0..1) · read-create · current The second VLAN CFI used to compare the incoming traffic. Its value is 0 or 1. | ||||
| CacdL2FilterVlan2IdEn | 1.3.6.1.4.1.22420.2.2.1.1.21 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the second VLAN ID check. | ||||
| CacdL2FilterVlan2Id | 1.3.6.1.4.1.22420.2.2.1.1.22 | Unsigned32 (0..4065) | RC | |
column · Unsigned32 (0..4065) · read-create · current The second VLAN ID used to compare the incoming traffic. Its value ranges from 0 to 4095. | ||||
| CacdL2FilterRowStatus | 1.3.6.1.4.1.22420.2.2.1.1.23 | RowStatus | RC | |
column · RowStatus · read-create · current All columns must have a valid value before a row can be activated. To create a new filter you shall provide the a unique filter name for an empty row with the RowStatus set to Create and Go. To delete the row you need to set the RowStatus to destroy. | ||||
| TacdIPv4FilterTable | 1.3.6.1.4.1.22420.2.2.2 | NA | deprecated | |
table · not-accessible · deprecated Table of all IPv4 filters | ||||
| RacdIPv4FilterEntry | 1.3.6.1.4.1.22420.2.2.2.1 | NA | ||
row · not-accessible · current A Filter is a pattern matching a definition against packets.
| ||||
| CacdIPv4FilterID | 1.3.6.1.4.1.22420.2.2.2.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current Unique value for each filter. Its value ranges from 1 to maximum value. This maximum value depend of the type of platform. | ||||
| CacdIPv4FilterName | 1.3.6.1.4.1.22420.2.2.2.1.2 | DisplayString (SIZE (1..31)) | RC | |
column · DisplayString (SIZE (1..31)) · read-create · current This is a string to identify the filter. | ||||
| CacdIPv4FilterSrcEn | 1.3.6.1.4.1.22420.2.2.2.1.3 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the Source IP address check. | ||||
| CacdIPv4FilterSrc | 1.3.6.1.4.1.22420.2.2.2.1.4 | IpAddress | RC | |
column · IpAddress · read-create · current The source IP address used to compare the incoming traffic. | ||||
| CacdIPv4FilterSrcMask | 1.3.6.1.4.1.22420.2.2.2.1.5 | IpAddress | RC | |
column · IpAddress · read-create · current The source IP address mask used to compare the incoming traffic. | ||||
| CacdIPv4FilterDstEn | 1.3.6.1.4.1.22420.2.2.2.1.6 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the Destination IP address check. | ||||
| CacdIPv4FilterDst | 1.3.6.1.4.1.22420.2.2.2.1.7 | IpAddress | RC | |
column · IpAddress · read-create · current The destination IP address used to compare the incoming traffic. | ||||
| CacdIPv4FilterDstMask | 1.3.6.1.4.1.22420.2.2.2.1.8 | IpAddress | RC | |
column · IpAddress · read-create · current The destination IP address mask used to compare the incoming traffic. | ||||
| CacdIPv4FilterProtoEn | 1.3.6.1.4.1.22420.2.2.2.1.9 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the IP protocol check. | ||||
| CacdIPv4FilterProto | 1.3.6.1.4.1.22420.2.2.2.1.10 | Unsigned32 (0..255) | RC | |
column · Unsigned32 (0..255) · read-create · current The IP protocol used to compare the incoming traffic. Its value ranges from 0 to 255. | ||||
| CacdIPv4FilterTTLEn | 1.3.6.1.4.1.22420.2.2.2.1.11 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the TTL check. | ||||
| CacdIPv4FilterTTL | 1.3.6.1.4.1.22420.2.2.2.1.12 | Unsigned32 (0..255) | RC | |
column · Unsigned32 (0..255) · read-create · current The TTL used to compare the incoming traffic. Its value ranges from 0 to 255. | ||||
| CacdIPv4FilterIHLEn | 1.3.6.1.4.1.22420.2.2.2.1.13 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the IP Header Length check. | ||||
| CacdIPv4FilterIHL | 1.3.6.1.4.1.22420.2.2.2.1.14 | Unsigned32 (5..15) | RC | |
column · Unsigned32 (5..15) · read-create · current The IP Header Length used to compare the incoming traffic. Its value ranges from 5 to 15. | ||||
| CacdIPv4FilterDscpEn | 1.3.6.1.4.1.22420.2.2.2.1.15 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the DSCP (Diff-Serv Code Point) check. | ||||
| CacdIPv4FilterDscp | 1.3.6.1.4.1.22420.2.2.2.1.16 | Unsigned32 (0..63) | RC | |
column · Unsigned32 (0..63) · read-create · current The DSCP value used to compare the incoming traffic. Its value ranges from 0 to 63. | ||||
| CacdIPv4FilterECNEn | 1.3.6.1.4.1.22420.2.2.2.1.17 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the ECN (Explicite Cogestion Notification) check. | ||||
| CacdIPv4FilterECN | 1.3.6.1.4.1.22420.2.2.2.1.18 | Unsigned32 (0..3) | RC | |
column · Unsigned32 (0..3) · read-create · current The ECN value used to compare the incoming traffic. Its value ranges from 0 to 3. | ||||
| CacdIPv4FilterSrcPortEn | 1.3.6.1.4.1.22420.2.2.2.1.19 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the UDP/TCP Source port check. | ||||
| CacdIPv4FilterSrcPort | 1.3.6.1.4.1.22420.2.2.2.1.20 | Unsigned32 (0..65535) | RC | |
column · Unsigned32 (0..65535) · read-create · current The UDP/TCP Source Port used to compare the incoming traffic. Its value ranges from 0 to 65535. | ||||
| CacdIPv4FilterDstPortEn | 1.3.6.1.4.1.22420.2.2.2.1.21 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the UDP/TCP Destination port check. | ||||
| CacdIPv4FilterDstPort | 1.3.6.1.4.1.22420.2.2.2.1.22 | Unsigned32 (0..65535) | RC | |
column · Unsigned32 (0..65535) · read-create · current The UDP/TCP Destination Port used to compare the incoming traffic. Its value ranges from 0 to 65535. | ||||
| CacdIPv4FilterIcmpTypeEn | 1.3.6.1.4.1.22420.2.2.2.1.23 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the ICMP type check. | ||||
| CacdIPv4FilterIcmpType | 1.3.6.1.4.1.22420.2.2.2.1.24 | Unsigned32 (0..255) | RC | |
column · Unsigned32 (0..255) · read-create · current The ICMP type used to compare the incoming traffic. Its value ranges from 0 to 255. | ||||
| CacdIPv4FilterIcmpCodeEn | 1.3.6.1.4.1.22420.2.2.2.1.25 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the ICMP code check. | ||||
| CacdIPv4FilterIcmpCode | 1.3.6.1.4.1.22420.2.2.2.1.26 | Unsigned32 (0..255) | RC | |
column · Unsigned32 (0..255) · read-create · current The ICMP code used to compare the incoming traffic. Its value ranges from 0 to 255. | ||||
| CacdIPv4FilterRowStatus | 1.3.6.1.4.1.22420.2.2.2.1.27 | RowStatus | RC | |
column · RowStatus · read-create · current All columns must have a valid value before a row can be activated. To create a new filter you shall provide the a unique filter name for an empty row with the RowStatus set to Create and Go. To delete the row you need to set the RowStatus to destroy. | ||||
| TacdSmapL2FilterTable | 1.3.6.1.4.1.22420.2.2.3 | NA | ||
table · not-accessible · current Table of all service mapping (SMAP) Layer 2 filters | ||||
| RacdSmapL2FilterEntry | 1.3.6.1.4.1.22420.2.2.3.1 | NA | ||
row · not-accessible · current A Filter is a pattern matching a definition against packets.
| ||||
| CacdSmapL2FilterID | 1.3.6.1.4.1.22420.2.2.3.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current Unique value for each filter. Its value ranges from 1 to maximum value. This maximum value depend of the type of platform. | ||||
| CacdSmapL2FilterName | 1.3.6.1.4.1.22420.2.2.3.1.2 | DisplayString (SIZE (1..31)) | RC | |
column · DisplayString (SIZE (1..31)) · read-create · current This is a string to identify the filter. | ||||
| CacdSmapL2FilterRowStatus | 1.3.6.1.4.1.22420.2.2.3.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current All columns must have a valid value before a row can be activated. To create a new filter you shall provide the a unique filter name for an empty row with the RowStatus set to Create and Go. To delete the row you need to set the RowStatus to destroy. | ||||
| CacdSmapL2FilterVlan1PriorEn | 1.3.6.1.4.1.22420.2.2.3.1.4 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the first VLAN priority check. | ||||
| CacdSmapL2FilterVlan1Prior | 1.3.6.1.4.1.22420.2.2.3.1.5 | Unsigned32 (0..7) | RC | |
column · Unsigned32 (0..7) · read-create · current The first VLAN priority used to compare the incoming traffic. Its value ranges from 0 to 7. | ||||
| CacdSmapL2FilterVlan1PriorLast | 1.3.6.1.4.1.22420.2.2.3.1.6 | Unsigned32 (0..7) | RC | |
column · Unsigned32 (0..7) · read-create · current First VLAN priority last value, used in range operation. Its value ranges from 0 to 7. | ||||
| CacdSmapL2FilterVlan1PriorOper | 1.3.6.1.4.1.22420.2.2.3.1.7 | AcdFilterOperator | RC | |
column · AcdFilterOperator · read-create · current First VLAN Priority operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range). | ||||
| CacdSmapL2FilterVlan1IdEn | 1.3.6.1.4.1.22420.2.2.3.1.8 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the first VLAN ID check. | ||||
| CacdSmapL2FilterVlan1Id | 1.3.6.1.4.1.22420.2.2.3.1.9 | Unsigned32 (0..4095) | RC | |
column · Unsigned32 (0..4095) · read-create · current The first VLAN ID used to compare the incoming traffic. Its value ranges from 0 to 4095. | ||||
| CacdSmapL2FilterVlan1IdLast | 1.3.6.1.4.1.22420.2.2.3.1.10 | Unsigned32 (0..4095) | RC | |
column · Unsigned32 (0..4095) · read-create · current First VLAN ID last value, used in range operation. Its value ranges from 0 to 4095. | ||||
| CacdSmapL2FilterVlan1IdOper | 1.3.6.1.4.1.22420.2.2.3.1.11 | AcdFilterOperator | RC | |
column · AcdFilterOperator · read-create · current First VLAN ID operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range). | ||||
| CacdSmapL2FilterVlan1CfiEn | 1.3.6.1.4.1.22420.2.2.3.1.12 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the first VLAN CFI check. | ||||
| CacdSmapL2FilterVlan1Cfi | 1.3.6.1.4.1.22420.2.2.3.1.13 | Unsigned32 (0..1) | RC | |
column · Unsigned32 (0..1) · read-create · current The first VLAN CFI used to compare the incoming traffic. Its value is 0 or 1. | ||||
| CacdSmapL2FilterVlan1TypeEn | 1.3.6.1.4.1.22420.2.2.3.1.14 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the first VLAN Ethertype check. | ||||
| CacdSmapL2FilterVlan1Type | 1.3.6.1.4.1.22420.2.2.3.1.15 | AcdFilterVlanType | RC | |
column · AcdFilterVlanType · read-create · current VLAN Ethernet type. | ||||
| CacdSmapL2FilterVlan2PriorEn | 1.3.6.1.4.1.22420.2.2.3.1.16 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the second VLAN priority check. | ||||
| CacdSmapL2FilterVlan2Prior | 1.3.6.1.4.1.22420.2.2.3.1.17 | Unsigned32 (0..7) | RC | |
column · Unsigned32 (0..7) · read-create · current The second VLAN priority used to compare the incoming traffic. Its value ranges from 0 to 7. | ||||
| CacdSmapL2FilterVlan2PriorLast | 1.3.6.1.4.1.22420.2.2.3.1.18 | Unsigned32 (0..7) | RC | |
column · Unsigned32 (0..7) · read-create · current Second VLAN priority last value, used in range operation. Its value ranges from 0 to 7. | ||||
| CacdSmapL2FilterVlan2PriorOper | 1.3.6.1.4.1.22420.2.2.3.1.19 | AcdFilterOperator | RC | |
column · AcdFilterOperator · read-create · current VLAN Priority operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range). | ||||
| CacdSmapL2FilterVlan2IdEn | 1.3.6.1.4.1.22420.2.2.3.1.20 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the second VLAN ID check. | ||||
| CacdSmapL2FilterVlan2Id | 1.3.6.1.4.1.22420.2.2.3.1.21 | Unsigned32 (0..4095) | RC | |
column · Unsigned32 (0..4095) · read-create · current The second VLAN ID used to compare the incoming traffic. Its value ranges from 0 to 4095. | ||||
| CacdSmapL2FilterVlan2IdLast | 1.3.6.1.4.1.22420.2.2.3.1.22 | Unsigned32 (0..4095) | RC | |
column · Unsigned32 (0..4095) · read-create · current Second VLAN ID last value, used in range operation. Its value ranges from 0 to 4095. | ||||
| CacdSmapL2FilterVlan2IdOper | 1.3.6.1.4.1.22420.2.2.3.1.23 | AcdFilterOperator | RC | |
column · AcdFilterOperator · read-create · current Second VLAN ID operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range). | ||||
| CacdSmapL2FilterVlan2CfiEn | 1.3.6.1.4.1.22420.2.2.3.1.24 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the second VLAN CFI check. | ||||
| CacdSmapL2FilterVlan2Cfi | 1.3.6.1.4.1.22420.2.2.3.1.25 | Unsigned32 (0..1) | RC | |
column · Unsigned32 (0..1) · read-create · current The second VLAN CFI used to compare the incoming traffic. Its value is 0 or 1. | ||||
| CacdSmapL2FilterVlan2TypeEn | 1.3.6.1.4.1.22420.2.2.3.1.26 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the second VLAN Ethertype check. | ||||
| CacdSmapL2FilterVlan2Type | 1.3.6.1.4.1.22420.2.2.3.1.27 | AcdFilterVlanType | RC | |
column · AcdFilterVlanType · read-create · current VLAN Ethernet type. | ||||
| CacdSmapL2FilterMacDstEn | 1.3.6.1.4.1.22420.2.2.3.1.28 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the destination MAC address check. | ||||
| CacdSmapL2FilterMacDst | 1.3.6.1.4.1.22420.2.2.3.1.29 | MacAddress | RC | |
column · MacAddress · read-create · current The destination MAC address used to compare the incoming traffic. | ||||
| CacdSmapL2FilterMacDstMask | 1.3.6.1.4.1.22420.2.2.3.1.30 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current Number of destination MAC address bits to compare. Its value ranges from 0 to 48. | ||||
| CacdSmapL2FilterMacSrcEn | 1.3.6.1.4.1.22420.2.2.3.1.31 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the source MAC address check. | ||||
| CacdSmapL2FilterMacSrc | 1.3.6.1.4.1.22420.2.2.3.1.32 | MacAddress | RC | |
column · MacAddress · read-create · current The source MAC address used to compare the incoming traffic. | ||||
| CacdSmapL2FilterMacSrcMask | 1.3.6.1.4.1.22420.2.2.3.1.33 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current Number of source MAC address bits to compare. Its value ranges from 0 to 48. | ||||
| CacdSmapL2FilterEtypeEn | 1.3.6.1.4.1.22420.2.2.3.1.34 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the Ethernet type check. | ||||
| CacdSmapL2FilterEtype | 1.3.6.1.4.1.22420.2.2.3.1.35 | Unsigned32 (0..65535) | RC | |
column · Unsigned32 (0..65535) · read-create · current The Ethernet type used to compare the incoming traffic. | ||||
| CacdSmapL2FilterIpCosEn | 1.3.6.1.4.1.22420.2.2.3.1.36 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the Ethernet type check. | ||||
| CacdSmapL2FilterIpCosMode | 1.3.6.1.4.1.22420.2.2.3.1.37 | INTEGER | RC | |
column · INTEGER · read-create · current VLAN ID operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range).
| ||||
| CacdSmapL2FilterDscp | 1.3.6.1.4.1.22420.2.2.3.1.38 | Unsigned32 (0..63) | RC | |
column · Unsigned32 (0..63) · read-create · current The DSCP value used to compare the incoming traffic. Its value ranges from 0 to 63. | ||||
| CacdSmapL2FilterDscpLast | 1.3.6.1.4.1.22420.2.2.3.1.39 | Unsigned32 (0..63) | RC | |
column · Unsigned32 (0..63) · read-create · current The last DSCP value, used in range operation. Its value ranges from 0 to 63. | ||||
| CacdSmapL2FilterDscpOper | 1.3.6.1.4.1.22420.2.2.3.1.40 | AcdFilterOperator | RC | |
column · AcdFilterOperator · read-create · current DSCP operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range). | ||||
| CacdSmapL2FilterPre | 1.3.6.1.4.1.22420.2.2.3.1.41 | Unsigned32 (0..7) | RC | |
column · Unsigned32 (0..7) · read-create · current The Precedence value used to compare the incoming traffic. Its value ranges from 0 to 3. | ||||
| CacdSmapL2FilterPreLast | 1.3.6.1.4.1.22420.2.2.3.1.42 | Unsigned32 (0..7) | RC | |
column · Unsigned32 (0..7) · read-create · current The last Precedence value, used in range operation. Its value ranges from 0 to 3. | ||||
| CacdSmapL2FilterPreOper | 1.3.6.1.4.1.22420.2.2.3.1.43 | AcdFilterOperator | RC | |
column · AcdFilterOperator · read-create · current Precedence operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range). | ||||
| TacdSmapIPv4FilterTable | 1.3.6.1.4.1.22420.2.2.4 | NA | ||
table · not-accessible · current Table of all Extended IPv4 filters | ||||
| RacdSmapIPv4FilterEntry | 1.3.6.1.4.1.22420.2.2.4.1 | NA | ||
row · not-accessible · current A Filter is a pattern matching a definition against packets.
| ||||
| CacdSmapIPv4FilterID | 1.3.6.1.4.1.22420.2.2.4.1.1 | Unsigned32 | NA | |
column · Unsigned32 · not-accessible · current Unique value for each filter. Its value ranges from 1 to maximum value. This maximum value depend of the type of platform. | ||||
| CacdSmapIPv4FilterName | 1.3.6.1.4.1.22420.2.2.4.1.2 | DisplayString (SIZE (1..31)) | RC | |
column · DisplayString (SIZE (1..31)) · read-create · current This is a string to identify the filter. | ||||
| CacdSmapIPv4FilterRowStatus | 1.3.6.1.4.1.22420.2.2.4.1.3 | RowStatus | RC | |
column · RowStatus · read-create · current All columns must have a valid value before a row can be activated. To create a new filter you shall provide the a unique filter name for an empty row with the RowStatus set to Create and Go. To delete the row you need to set the RowStatus to destroy. | ||||
| CacdSmapIPv4FilterVlan1PriorEn | 1.3.6.1.4.1.22420.2.2.4.1.4 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the first VLAN priority check. | ||||
| CacdSmapIPv4FilterVlan1Prior | 1.3.6.1.4.1.22420.2.2.4.1.5 | Unsigned32 (0..7) | RC | |
column · Unsigned32 (0..7) · read-create · current The first VLAN priority used to compare the incoming traffic. Its value ranges from 0 to 7. | ||||
| CacdSmapIPv4FilterVlan1PriorLast | 1.3.6.1.4.1.22420.2.2.4.1.6 | Unsigned32 (0..7) | RC | |
column · Unsigned32 (0..7) · read-create · current First VLAN priority last value, used in range operation. Its value ranges from 0 to 7. | ||||
| CacdSmapIPv4FilterVlan1PriorOper | 1.3.6.1.4.1.22420.2.2.4.1.7 | AcdFilterOperator | RC | |
column · AcdFilterOperator · read-create · current VLAN Priority operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range). | ||||
| CacdSmapIPv4FilterVlan1IdEn | 1.3.6.1.4.1.22420.2.2.4.1.8 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the first VLAN ID check. | ||||
| CacdSmapIPv4FilterVlan1Id | 1.3.6.1.4.1.22420.2.2.4.1.9 | Unsigned32 (0..4095) | RC | |
column · Unsigned32 (0..4095) · read-create · current The first VLAN ID used to compare the incoming traffic. Its value ranges from 0 to 4095. | ||||
| CacdSmapIPv4FilterVlan1IdLast | 1.3.6.1.4.1.22420.2.2.4.1.10 | Unsigned32 (0..4095) | RC | |
column · Unsigned32 (0..4095) · read-create · current First VLAN ID last value, used in range operation. Its value ranges from 0 to 4095. | ||||
| CacdSmapIPv4FilterVlan1IdOper | 1.3.6.1.4.1.22420.2.2.4.1.11 | AcdFilterOperator | RC | |
column · AcdFilterOperator · read-create · current First VLAN ID operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range). | ||||
| CacdSmapIPv4FilterVlan1CfiEn | 1.3.6.1.4.1.22420.2.2.4.1.12 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the first VLAN CFI check. | ||||
| CacdSmapIPv4FilterVlan1Cfi | 1.3.6.1.4.1.22420.2.2.4.1.13 | Unsigned32 | RC | |
column · Unsigned32 · read-create · current The first VLAN CFI used to compare the incoming traffic. Its value is 0 or 1. | ||||
| CacdSmapIPv4FilterVlan1TypeEn | 1.3.6.1.4.1.22420.2.2.4.1.14 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the first VLAN Ethertype check. | ||||
| CacdSmapIPv4FilterVlan1Type | 1.3.6.1.4.1.22420.2.2.4.1.15 | AcdFilterVlanType | RC | |
column · AcdFilterVlanType · read-create · current VLAN Ethernet type. | ||||
| CacdSmapIPv4FilterVlan2PriorEn | 1.3.6.1.4.1.22420.2.2.4.1.16 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the second VLAN priority check. | ||||
| CacdSmapIPv4FilterVlan2Prior | 1.3.6.1.4.1.22420.2.2.4.1.17 | Unsigned32 (0..7) | RC | |
column · Unsigned32 (0..7) · read-create · current The second VLAN priority used to compare the incoming traffic. Its value ranges from 0 to 7. | ||||
| CacdSmapIPv4FilterVlan2PriorLast | 1.3.6.1.4.1.22420.2.2.4.1.18 | Unsigned32 (0..7) | RC | |
column · Unsigned32 (0..7) · read-create · current Second VLAN priority last value, used in range operation. Its value ranges from 0 to 7. | ||||
| CacdSmapIPv4FilterVlan2PriorOper | 1.3.6.1.4.1.22420.2.2.4.1.19 | AcdFilterOperator | RC | |
column · AcdFilterOperator · read-create · current VLAN Priority operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range). | ||||
| CacdSmapIPv4FilterVlan2IdEn | 1.3.6.1.4.1.22420.2.2.4.1.20 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the second VLAN ID check. | ||||
| CacdSmapIPv4FilterVlan2Id | 1.3.6.1.4.1.22420.2.2.4.1.21 | Unsigned32 (0..4095) | RC | |
column · Unsigned32 (0..4095) · read-create · current The second VLAN ID used to compare the incoming traffic. Its value ranges from 0 to 4095. | ||||
| CacdSmapIPv4FilterVlan2IdLast | 1.3.6.1.4.1.22420.2.2.4.1.22 | Unsigned32 (0..4095) | RC | |
column · Unsigned32 (0..4095) · read-create · current The second VLAN ID used to compare the incoming traffic. Its value ranges from 0 to 4095. | ||||
| CacdSmapIPv4FilterVlan2IdOper | 1.3.6.1.4.1.22420.2.2.4.1.23 | AcdFilterOperator | RC | |
column · AcdFilterOperator · read-create · current VLAN ID operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range). | ||||
| CacdSmapIPv4FilterVlan2CfiEn | 1.3.6.1.4.1.22420.2.2.4.1.24 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the second VLAN CFI check. | ||||
| CacdSmapIPv4FilterVlan2Cfi | 1.3.6.1.4.1.22420.2.2.4.1.25 | Unsigned32 (0..1) | RC | |
column · Unsigned32 (0..1) · read-create · current The second VLAN CFI used to compare the incoming traffic. Its value is 0 or 1. | ||||
| CacdSmapIPv4FilterVlan2TypeEn | 1.3.6.1.4.1.22420.2.2.4.1.26 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the second VLAN Ethertype check. | ||||
| CacdSmapIPv4FilterVlan2Type | 1.3.6.1.4.1.22420.2.2.4.1.27 | AcdFilterVlanType | RC | |
column · AcdFilterVlanType · read-create · current VLAN Ethernet type. | ||||
| CacdSmapIPv4FilterSrcEn | 1.3.6.1.4.1.22420.2.2.4.1.28 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the Source IP address check. | ||||
| CacdSmapIPv4FilterSrc | 1.3.6.1.4.1.22420.2.2.4.1.29 | IpAddress | RC | |
column · IpAddress · read-create · current The source IP address used to compare the incoming traffic. | ||||
| CacdSmapIPv4FilterSrcMask | 1.3.6.1.4.1.22420.2.2.4.1.30 | IpAddress | RC | |
column · IpAddress · read-create · current The source IP address mask used to compare the incoming traffic. | ||||
| CacdSmapIPv4FilterDstEn | 1.3.6.1.4.1.22420.2.2.4.1.31 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the Destination IP address check. | ||||
| CacdSmapIPv4FilterDst | 1.3.6.1.4.1.22420.2.2.4.1.32 | IpAddress | RC | |
column · IpAddress · read-create · current The destination IP address used to compare the incoming traffic. | ||||
| CacdSmapIPv4FilterDstMask | 1.3.6.1.4.1.22420.2.2.4.1.33 | IpAddress | RC | |
column · IpAddress · read-create · current The destination IP address mask used to compare the incoming traffic. | ||||
| CacdSmapIPv4FilterProtoEn | 1.3.6.1.4.1.22420.2.2.4.1.34 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the IP protocol check. | ||||
| CacdSmapIPv4FilterProto | 1.3.6.1.4.1.22420.2.2.4.1.35 | Unsigned32 (0..255) | RC | |
column · Unsigned32 (0..255) · read-create · current The IP protocol used to compare the incoming traffic. Its value ranges from 0 to 255. | ||||
| CacdSmapIPv4FilterTTLEn | 1.3.6.1.4.1.22420.2.2.4.1.36 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the TTL check. | ||||
| CacdSmapIPv4FilterTTL | 1.3.6.1.4.1.22420.2.2.4.1.37 | Unsigned32 (0..255) | RC | |
column · Unsigned32 (0..255) · read-create · current The TTL used to compare the incoming traffic. Its value ranges from 0 to 255. | ||||
| CacdSmapIPv4FilterIHLEn | 1.3.6.1.4.1.22420.2.2.4.1.38 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the IP Header Length check. | ||||
| CacdSmapIPv4FilterIHL | 1.3.6.1.4.1.22420.2.2.4.1.39 | Unsigned32 (5..15) | RC | |
column · Unsigned32 (5..15) · read-create · current The IP Header Length used to compare the incoming traffic. Its value ranges from 5 to 15. | ||||
| CacdSmapIPv4FilterIpCosEn | 1.3.6.1.4.1.22420.2.2.4.1.40 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the Ethernet type check. | ||||
| CacdSmapIPv4FilterIpCosMode | 1.3.6.1.4.1.22420.2.2.4.1.41 | INTEGER | RC | |
column · INTEGER · read-create · current VLAN ID operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range).
| ||||
| CacdSmapIPv4FilterDscp | 1.3.6.1.4.1.22420.2.2.4.1.42 | Unsigned32 (0..63) | RC | |
column · Unsigned32 (0..63) · read-create · current The DSCP value used to compare the incoming traffic. Its value ranges from 0 to 63. | ||||
| CacdSmapIPv4FilterDscpLast | 1.3.6.1.4.1.22420.2.2.4.1.43 | Unsigned32 (0..63) | RC | |
column · Unsigned32 (0..63) · read-create · current The DSCP value used to compare the incoming traffic. Its value ranges from 0 to 63. | ||||
| CacdSmapIPv4FilterDscpOper | 1.3.6.1.4.1.22420.2.2.4.1.44 | AcdFilterOperator | RC | |
column · AcdFilterOperator · read-create · current DSCP operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range). | ||||
| CacdSmapIPv4FilterPre | 1.3.6.1.4.1.22420.2.2.4.1.45 | Unsigned32 (0..7) | RC | |
column · Unsigned32 (0..7) · read-create · current The Precedence value used to compare the incoming traffic. Its value ranges from 0 to 3. | ||||
| CacdSmapIPv4FilterPreLast | 1.3.6.1.4.1.22420.2.2.4.1.46 | Unsigned32 (0..7) | RC | |
column · Unsigned32 (0..7) · read-create · current The Precedence value used to compare the incoming traffic. Its value ranges from 0 to 3. | ||||
| CacdSmapIPv4FilterPreOper | 1.3.6.1.4.1.22420.2.2.4.1.47 | AcdFilterOperator | RC | |
column · AcdFilterOperator · read-create · current Precedence operator. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range). | ||||
| CacdSmapIPv4FilterECNEn | 1.3.6.1.4.1.22420.2.2.4.1.48 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the ECN (Explicite Cogestion Notification) check. | ||||
| CacdSmapIPv4FilterECN | 1.3.6.1.4.1.22420.2.2.4.1.49 | Unsigned32 (0..3) | RC | |
column · Unsigned32 (0..3) · read-create · current The ECN value used to compare the incoming traffic. Its value ranges from 0 to 3. | ||||
| CacdSmapIPv4FilterSrcPortEn | 1.3.6.1.4.1.22420.2.2.4.1.50 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the UDP/TCP Source port check. | ||||
| CacdSmapIPv4FilterSrcPort | 1.3.6.1.4.1.22420.2.2.4.1.51 | Unsigned32 (0..65535) | RC | |
column · Unsigned32 (0..65535) · read-create · current The UDP/TCP Source Port used to compare the incoming traffic. Its value ranges from 0 to 65535. | ||||
| CacdSmapIPv4FilterDstPortEn | 1.3.6.1.4.1.22420.2.2.4.1.52 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the UDP/TCP Destination port check. | ||||
| CacdSmapIPv4FilterDstPort | 1.3.6.1.4.1.22420.2.2.4.1.53 | Unsigned32 (0..65535) | RC | |
column · Unsigned32 (0..65535) · read-create · current The UDP/TCP Destination Port used to compare the incoming traffic. Its value ranges from 0 to 65535. | ||||
| CacdSmapIPv4FilterIcmpTypeEn | 1.3.6.1.4.1.22420.2.2.4.1.54 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the ICMP type check. | ||||
| CacdSmapIPv4FilterIcmpType | 1.3.6.1.4.1.22420.2.2.4.1.55 | Unsigned32 (0..255) | RC | |
column · Unsigned32 (0..255) · read-create · current The ICMP type used to compare the incoming traffic. Its value ranges from 0 to 255. | ||||
| CacdSmapIPv4FilterIcmpCodeEn | 1.3.6.1.4.1.22420.2.2.4.1.56 | TruthValue | RC | |
column · TruthValue · read-create · current Enable or disable the ICMP code check. | ||||
| CacdSmapIPv4FilterIcmpCode | 1.3.6.1.4.1.22420.2.2.4.1.57 | Unsigned32 (0..255) | RC | |
column · Unsigned32 (0..255) · read-create · current The ICMP code used to compare the incoming traffic. Its value ranges from 0 to 255. | ||||
| CacdSmapIPv4FilterSrcPortLast | 1.3.6.1.4.1.22420.2.2.4.1.58 | Unsigned32 (0..65535) | RC | |
column · Unsigned32 (0..65535) · read-create · current The UDP/TCP Source Port last value, used in range operation. Its value ranges from 0 to 65535. | ||||
| CacdSmapIPv4FilterSrcPortOper | 1.3.6.1.4.1.22420.2.2.4.1.59 | AcdFilterOperatorEqualRangeOnly | RC | |
column · AcdFilterOperatorEqualRangeOnly · read-create · current The UDP/TCP Source Port operator. Valid operator types are: Equal to or Range (inclusive range). | ||||
| CacdSmapIPv4FilterDstPortLast | 1.3.6.1.4.1.22420.2.2.4.1.60 | Unsigned32 (0..65535) | RC | |
column · Unsigned32 (0..65535) · read-create · current The UDP/TCP Destination Port last value, used in range operation. Its value ranges from 0 to 65535. | ||||
| CacdSmapIPv4FilterDstPortOper | 1.3.6.1.4.1.22420.2.2.4.1.61 | AcdFilterOperatorEqualRangeOnly | RC | |
column · AcdFilterOperatorEqualRangeOnly · read-create · current The UDP/TCP Destination Port operator. Valid operator types are: Equal to or Range (inclusive range). | ||||
| NacdFilterNotifications | 1.3.6.1.4.1.22420.2.2.5 | |||
| NacdFilterMIBObjects | 1.3.6.1.4.1.22420.2.2.6 | |||
| NacdFilterTableTid | 1.3.6.1.4.1.22420.2.2.6.1 | |||
| SacdSmapL2FilterTableLastChangeTid | 1.3.6.1.4.1.22420.2.2.6.1.1 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current This is the transaction ID of the last change of the acdSmapL2FilterTable table. If this value is different since the last read this is indicate a table change. | ||||
| SacdSmapIPv4FilterTableLastChangeTid | 1.3.6.1.4.1.22420.2.2.6.1.2 | Unsigned32 | RO | |
scalar · Unsigned32 · read-only · current This is the transaction ID of the last change of the acdSmapIPv4FilterTable table. If this value is different since the last read this is indicate a table change. | ||||
| NacdFilterConformance | 1.3.6.1.4.1.22420.2.2.7 | |||
| NacdFilterCompliances | 1.3.6.1.4.1.22420.2.2.7.1 | |||
| MacdFilterCompliance | 1.3.6.1.4.1.22420.2.2.7.1.1 | |||
compliance · current The compliance statement for support of the ACD-FILTER-MIB module. | ||||
| NacdFilterGroups | 1.3.6.1.4.1.22420.2.2.7.2 | |||
| GacdL2FilterGroup | 1.3.6.1.4.1.22420.2.2.7.2.1 | |||
group · current Objects for the L2 filter configuration Group.
| ||||
| GacdIPv4FilterGroup | 1.3.6.1.4.1.22420.2.2.7.2.2 | |||
group · current Objects for the IPv4 filter configuration Group.
| ||||
| GacdSmapL2FilterGroup | 1.3.6.1.4.1.22420.2.2.7.2.3 | |||
group · current Objects for the SMAP L2 filter configuration Group.
| ||||
| GacdSmapIPv4FilterGroup | 1.3.6.1.4.1.22420.2.2.7.2.4 | |||
group · current Objects for the SMAP IPv4 filter configuration Group.
| ||||
| GacdFilterTidGroup | 1.3.6.1.4.1.22420.2.2.7.2.5 | |||
group · current List of scalars to monitior changes in tables. | ||||
Textual conventions
AcdFilterOperatorINTEGERequalTo(3)greaterThan(2)lessThan(1)range(4)Operator for field comparaison. Valid operator types are: Greater than, Less than, Equal to or Range (inclusive range).
AcdFilterOperatorEqualRangeOnlyINTEGERequalTo(3)range(4)Operator for field comparaison. Valid operator types are: Equal to or Range (inclusive range).
AcdFilterVlanTypeINTEGERany(5)both(3)cvlan(1)svlan(2)tvlan(4)The type of VLAN to be used.