UCD-SNMP-MIB
U.C. Davis, ECE Dept. TomThis file defines the private UCD SNMP MIB extensions.
snmptranslate -m UCD-SNMP-MIB -Tpsnmpwalk -v2c -c <community> -m UCD-SNMP-MIB <host> 1.3.6.1.4.1.2021Imports
| HCNUM-TC | CounterBasedGauge64 |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, Opaque, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Iucdavis | 1.3.6.1.4.1.2021 | ||||||||||||||||||||
identity This file defines the private UCD SNMP MIB extensions. | |||||||||||||||||||||
| TprTable | 1.3.6.1.4.1.2021.2 | NA | |||||||||||||||||||
table · not-accessible · current A table containing information on running programs/daemons configured for monitoring in the snmpd.conf file of the agent. Processes violating the number of running processes required by the agent's configuration file are flagged with numerical and textual errors. | |||||||||||||||||||||
| RprEntry | 1.3.6.1.4.1.2021.2.1 | NA | |||||||||||||||||||
| CprIndex | 1.3.6.1.4.1.2021.2.1.1 | Integer32 (0..65535) | RO | 1 | |||||||||||||||||
column · Integer32 (0..65535) · read-only · current Reference Index for each observed process. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CprNames | 1.3.6.1.4.1.2021.2.1.2 | DisplayString | RO | pcod | |||||||||||||||||
column · DisplayString · read-only · current The process name we're counting/checking on. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CprMin | 1.3.6.1.4.1.2021.2.1.3 | Integer32 | RO | 1 | |||||||||||||||||
column · Integer32 · read-only · current The minimum number of processes that should be running. An error flag is generated if the number of running processes is < the minimum. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CprMax | 1.3.6.1.4.1.2021.2.1.4 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current The maximum number of processes that should be running. An error flag is generated if the number of running processes is > the maximum. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CprCount | 1.3.6.1.4.1.2021.2.1.5 | Integer32 | RO | 1 | |||||||||||||||||
column · Integer32 · read-only · current The number of current processes running with the name in question. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CprErrorFlag | 1.3.6.1.4.1.2021.2.1.100 | UCDErrorFlag | RO | 0 | |||||||||||||||||
column · UCDErrorFlag · read-only · current A Error flag to indicate trouble with a process. It goes to 1 if there is an error, 0 if no error. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CprErrMessage | 1.3.6.1.4.1.2021.2.1.101 | DisplayString | RO | | |||||||||||||||||
column · DisplayString · read-only · current An error message describing the problem (if one exists). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CprErrFix | 1.3.6.1.4.1.2021.2.1.102 | UCDErrorFix | RW | 0 | |||||||||||||||||
column · UCDErrorFix · read-write · current Setting this to one will try to fix the problem if the agent has been configured with a script to call to attempt to fix problems automatically using remote snmp operations. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CprErrFixCmd | 1.3.6.1.4.1.2021.2.1.103 | DisplayString | RO | | |||||||||||||||||
column · DisplayString · read-only · current The command that gets run when the prErrFix column is set to 1. Example values from LibreNMS test devices
| |||||||||||||||||||||
| Nmemory | 1.3.6.1.4.1.2021.4 | ||||||||||||||||||||
| SmemIndex | 1.3.6.1.4.1.2021.4.1 | Integer32 | RO | 0 | |||||||||||||||||
scalar · Integer32 · read-only · current Bogus Index. This should always return the integer 0. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmemErrorName | 1.3.6.1.4.1.2021.4.2 | DisplayString | RO | swap | |||||||||||||||||
scalar · DisplayString · read-only · current Bogus Name. This should always return the string 'swap'. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmemTotalSwap | 1.3.6.1.4.1.2021.4.3 | Integer32 | RO | 0 | |||||||||||||||||
scalar · Integer32 · read-only · current The total amount of swap space configured for this host.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmemAvailSwap | 1.3.6.1.4.1.2021.4.4 | Integer32 | RO | 0 | |||||||||||||||||
scalar · Integer32 · read-only · current The amount of swap space currently unused or available.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmemTotalReal | 1.3.6.1.4.1.2021.4.5 | Integer32 | RO | 1020016 | |||||||||||||||||
scalar · Integer32 · read-only · current The total amount of real/physical memory installed on this host.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmemAvailReal | 1.3.6.1.4.1.2021.4.6 | Integer32 | RO | 693456 | |||||||||||||||||
scalar · Integer32 · read-only · current The amount of real/physical memory currently unused or available.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmemTotalSwapTXT | 1.3.6.1.4.1.2021.4.7 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The total amount of swap space or virtual memory allocated for text pages on this host. This object will not be implemented on hosts where the underlying operating system does not distinguish text pages from other uses of swap space or virtual memory.
| |||||||||||||||||||||
| SmemAvailSwapTXT | 1.3.6.1.4.1.2021.4.8 | Integer32 | RO | deprecated | |||||||||||||||||
scalar · Integer32 · read-only · deprecated The amount of swap space or virtual memory currently being used by text pages on this host. This object will not be implemented on hosts where the underlying operating system does not distinguish text pages from other uses of swap space or virtual memory. Note that (despite the name), this value reports the amount used, rather than the amount free or available for use. For clarity, this object is being deprecated in favour of 'memUsedSwapTXT(16).
| |||||||||||||||||||||
| SmemTotalRealTXT | 1.3.6.1.4.1.2021.4.9 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The total amount of real/physical memory allocated for text pages on this host. This object will not be implemented on hosts where the underlying operating system does not distinguish text pages from other uses of physical memory.
| |||||||||||||||||||||
| SmemAvailRealTXT | 1.3.6.1.4.1.2021.4.10 | Integer32 | RO | deprecated | |||||||||||||||||
scalar · Integer32 · read-only · deprecated The amount of real/physical memory currently being used by text pages on this host. This object will not be implemented on hosts where the underlying operating system does not distinguish text pages from other uses of physical memory. Note that (despite the name), this value reports the amount used, rather than the amount free or available for use. For clarity, this object is being deprecated in favour of 'memUsedRealTXT(17).
| |||||||||||||||||||||
| SmemTotalFree | 1.3.6.1.4.1.2021.4.11 | Integer32 | RO | 57700 | |||||||||||||||||
scalar · Integer32 · read-only · current The total amount of memory free or available for use on this host. This value typically covers both real memory and swap space or virtual memory.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmemMinimumSwap | 1.3.6.1.4.1.2021.4.12 | Integer32 | RO | 16000 | |||||||||||||||||
scalar · Integer32 · read-only · current The minimum amount of swap space expected to be kept free or available during normal operation of this host. If this value (as reported by 'memAvailSwap(4)') falls below the specified level, then 'memSwapError(100)' will be set to 1 and an error message made available via 'memSwapErrorMsg(101)'.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmemShared | 1.3.6.1.4.1.2021.4.13 | Integer32 | RO | 0 | |||||||||||||||||
scalar · Integer32 · read-only · current The total amount of real or virtual memory currently allocated for use as shared memory. This object will not be implemented on hosts where the underlying operating system does not explicitly identify memory as specifically reserved for this purpose.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmemBuffer | 1.3.6.1.4.1.2021.4.14 | Integer32 | RO | 0 | |||||||||||||||||
scalar · Integer32 · read-only · current The total amount of real or virtual memory currently allocated for use as memory buffers. This object will not be implemented on hosts where the underlying operating system does not explicitly identify memory as specifically reserved for this purpose.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmemCached | 1.3.6.1.4.1.2021.4.15 | Integer32 | RO | 182328 | |||||||||||||||||
scalar · Integer32 · read-only · current The total amount of real or virtual memory currently allocated for use as cached memory. This object will not be implemented on hosts where the underlying operating system does not explicitly identify memory as specifically reserved for this purpose.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmemUsedSwapTXT | 1.3.6.1.4.1.2021.4.16 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The amount of swap space or virtual memory currently being used by text pages on this host. This object will not be implemented on hosts where the underlying operating system does not distinguish text pages from other uses of swap space or virtual memory.
| |||||||||||||||||||||
| SmemUsedRealTXT | 1.3.6.1.4.1.2021.4.17 | Integer32 | RO | ||||||||||||||||||
scalar · Integer32 · read-only · current The amount of real/physical memory currently being used by text pages on this host. This object will not be implemented on hosts where the underlying operating system does not distinguish text pages from other uses of physical memory.
| |||||||||||||||||||||
| SmemTotalSwapX | 1.3.6.1.4.1.2021.4.18 | CounterBasedGauge64 | RO | 0 | |||||||||||||||||
scalar · CounterBasedGauge64 · read-only · current The total amount of swap space configured for this host.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmemAvailSwapX | 1.3.6.1.4.1.2021.4.19 | CounterBasedGauge64 | RO | 0 | |||||||||||||||||
scalar · CounterBasedGauge64 · read-only · current The amount of swap space currently unused or available.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmemTotalRealX | 1.3.6.1.4.1.2021.4.20 | CounterBasedGauge64 | RO | 3615188 | |||||||||||||||||
scalar · CounterBasedGauge64 · read-only · current The total amount of real/physical memory installed on this host.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmemAvailRealX | 1.3.6.1.4.1.2021.4.21 | CounterBasedGauge64 | RO | 1296952 | |||||||||||||||||
scalar · CounterBasedGauge64 · read-only · current The amount of real/physical memory currently unused or available.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmemTotalFreeX | 1.3.6.1.4.1.2021.4.22 | CounterBasedGauge64 | RO | 1296952 | |||||||||||||||||
scalar · CounterBasedGauge64 · read-only · current The total amount of memory free or available for use on this host. This value typically covers both real memory and swap space or virtual memory.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmemMinimumSwapX | 1.3.6.1.4.1.2021.4.23 | CounterBasedGauge64 | RO | 16000 | |||||||||||||||||
scalar · CounterBasedGauge64 · read-only · current The minimum amount of swap space expected to be kept free or available during normal operation of this host. If this value (as reported by 'memAvailSwap(4)') falls below the specified level, then 'memSwapError(100)' will be set to 1 and an error message made available via 'memSwapErrorMsg(101)'.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmemSharedX | 1.3.6.1.4.1.2021.4.24 | CounterBasedGauge64 | RO | 23496 | |||||||||||||||||
scalar · CounterBasedGauge64 · read-only · current The total amount of real or virtual memory currently allocated for use as shared memory. This object will not be implemented on hosts where the underlying operating system does not explicitly identify memory as specifically reserved for this purpose.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmemBufferX | 1.3.6.1.4.1.2021.4.25 | CounterBasedGauge64 | RO | 36860 | |||||||||||||||||
scalar · CounterBasedGauge64 · read-only · current The total amount of real or virtual memory currently allocated for use as memory buffers. This object will not be implemented on hosts where the underlying operating system does not explicitly identify memory as specifically reserved for this purpose.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmemCachedX | 1.3.6.1.4.1.2021.4.26 | CounterBasedGauge64 | RO | 943028 | |||||||||||||||||
scalar · CounterBasedGauge64 · read-only · current The total amount of real or virtual memory currently allocated for use as cached memory. This object will not be implemented on hosts where the underlying operating system does not explicitly identify memory as specifically reserved for this purpose.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmemSysAvail | 1.3.6.1.4.1.2021.4.27 | CounterBasedGauge64 | RO | 2007704 | |||||||||||||||||
scalar · CounterBasedGauge64 · read-only · current The total amount of available memory, which is an estimate of how much memory is available for starting new applications, without swapping. This object will not be implemented on hosts where the underlying operating system does not explicitly identify memory as specifically reserved for this purpose.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmemSwapError | 1.3.6.1.4.1.2021.4.100 | UCDErrorFlag | RO | 1 | |||||||||||||||||
scalar · UCDErrorFlag · read-only · current Indicates whether the amount of available swap space (as reported by 'memAvailSwap(4)'), is less than the desired minimum (specified by 'memMinimumSwap(12)'). Example values from LibreNMS test devices
| |||||||||||||||||||||
| SmemSwapErrorMsg | 1.3.6.1.4.1.2021.4.101 | DisplayString | RO | 0 | |||||||||||||||||
scalar · DisplayString · read-only · current Describes whether the amount of available swap space (as reported by 'memAvailSwap(4)'), is less than the desired minimum (specified by 'memMinimumSwap(12)'). Example values from LibreNMS test devices
| |||||||||||||||||||||
| TextTable | 1.3.6.1.4.1.2021.8 | NA | |||||||||||||||||||
table · not-accessible · current A table of extensible commands returning output and result codes. These commands are configured via the agent's snmpd.conf file. | |||||||||||||||||||||
| RextEntry | 1.3.6.1.4.1.2021.8.1 | NA | |||||||||||||||||||
row · not-accessible · current An entry containing an extensible script/program and its output.
| |||||||||||||||||||||
| CextIndex | 1.3.6.1.4.1.2021.8.1.1 | Integer32 (0..65535) | RO | 1 | |||||||||||||||||
column · Integer32 (0..65535) · read-only · current Reference Index for extensible scripts. Simply an integer row number. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CextNames | 1.3.6.1.4.1.2021.8.1.2 | DisplayString | RO | InMailQueue | |||||||||||||||||
column · DisplayString · read-only · current A Short, one name description of the extensible command. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CextCommand | 1.3.6.1.4.1.2021.8.1.3 | DisplayString | RO | /bin/cat /proc/sys/fs/file-nr | |||||||||||||||||
column · DisplayString · read-only · current The command line to be executed. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CextResult | 1.3.6.1.4.1.2021.8.1.100 | Integer32 | RO | 4 | |||||||||||||||||
column · Integer32 · read-only · current The result code (exit status) from the executed command. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CextOutput | 1.3.6.1.4.1.2021.8.1.101 | DisplayString | RO | 4 | |||||||||||||||||
column · DisplayString · read-only · current The first line of output of the executed command. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CextErrFix | 1.3.6.1.4.1.2021.8.1.102 | UCDErrorFix | RW | 0 | |||||||||||||||||
column · UCDErrorFix · read-write · current Setting this to one will try to fix the problem if the agent has been configured with a script to call to attempt to fix problems automatically using remote snmp operations. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CextErrFixCmd | 1.3.6.1.4.1.2021.8.1.103 | DisplayString | RO | | |||||||||||||||||
column · DisplayString · read-only · current The command that gets run when the extErrFix column is set to 1. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TdskTable | 1.3.6.1.4.1.2021.9 | NA | |||||||||||||||||||
table · not-accessible · current Disk watching information. Partions to be watched are configured by the snmpd.conf file of the agent. | |||||||||||||||||||||
| RdskEntry | 1.3.6.1.4.1.2021.9.1 | NA | |||||||||||||||||||
| CdskIndex | 1.3.6.1.4.1.2021.9.1.1 | Integer32 (0..65535) | RO | 1 | |||||||||||||||||
column · Integer32 (0..65535) · read-only · current Integer reference number (row number) for the disk mib. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CdskPath | 1.3.6.1.4.1.2021.9.1.2 | DisplayString | RO | / | |||||||||||||||||
column · DisplayString · read-only · current Path where the disk is mounted. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CdskDevice | 1.3.6.1.4.1.2021.9.1.3 | DisplayString | RO | /var | |||||||||||||||||
column · DisplayString · read-only · current Path of the device for the partition Example values from LibreNMS test devices
| |||||||||||||||||||||
| CdskMinimum | 1.3.6.1.4.1.2021.9.1.4 | Integer32 | RO | 1000 | |||||||||||||||||
column · Integer32 · read-only · current Minimum space required on the disk (in kBytes) before the errors are triggered. Either this or dskMinPercent is configured via the agent's snmpd.conf file. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CdskMinPercent | 1.3.6.1.4.1.2021.9.1.5 | Integer32 | RO | -1 | |||||||||||||||||
column · Integer32 · read-only · current Percentage of minimum space required on the disk before the errors are triggered. Either this or dskMinimum is configured via the agent's snmpd.conf file. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CdskTotal | 1.3.6.1.4.1.2021.9.1.6 | Integer32 | RO | 30848 | |||||||||||||||||
column · Integer32 · read-only · current Total size of the disk/partion (kBytes). For large disks (>2Tb), this value will latch at INT32_MAX (2147483647). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CdskAvail | 1.3.6.1.4.1.2021.9.1.7 | Integer32 | RO | 0 | |||||||||||||||||
column · Integer32 · read-only · current Available space on the disk. For large lightly-used disks (>2Tb), this value will latch at INT32_MAX (2147483647). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CdskUsed | 1.3.6.1.4.1.2021.9.1.8 | Integer32 | RO | 30848 | |||||||||||||||||
column · Integer32 · read-only · current Used space on the disk. For large heavily-used disks (>2Tb), this value will latch at INT32_MAX (2147483647). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CdskPercent | 1.3.6.1.4.1.2021.9.1.9 | Integer32 | RO | 100 | |||||||||||||||||
column · Integer32 · read-only · current Percentage of space used on disk Example values from LibreNMS test devices
| |||||||||||||||||||||
| CdskPercentNode | 1.3.6.1.4.1.2021.9.1.10 | Integer32 | RO | 100 | |||||||||||||||||
column · Integer32 · read-only · current Percentage of inodes used on disk Example values from LibreNMS test devices
| |||||||||||||||||||||
| CdskTotalLow | 1.3.6.1.4.1.2021.9.1.11 | Unsigned32 | RO | 49152 | |||||||||||||||||
column · Unsigned32 · read-only · current Total size of the disk/partion (kBytes). Together with dskTotalHigh composes 64-bit number. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CdskTotalHigh | 1.3.6.1.4.1.2021.9.1.12 | Unsigned32 | RO | 0 | |||||||||||||||||
column · Unsigned32 · read-only · current Total size of the disk/partion (kBytes). Together with dskTotalLow composes 64-bit number. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CdskAvailLow | 1.3.6.1.4.1.2021.9.1.13 | Unsigned32 | RO | 29044 | |||||||||||||||||
column · Unsigned32 · read-only · current Available space on the disk (kBytes). Together with dskAvailHigh composes 64-bit number. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CdskAvailHigh | 1.3.6.1.4.1.2021.9.1.14 | Unsigned32 | RO | 0 | |||||||||||||||||
column · Unsigned32 · read-only · current Available space on the disk (kBytes). Together with dskAvailLow composes 64-bit number. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CdskUsedLow | 1.3.6.1.4.1.2021.9.1.15 | Unsigned32 | RO | 20108 | |||||||||||||||||
column · Unsigned32 · read-only · current Used space on the disk (kBytes). Together with dskUsedHigh composes 64-bit number. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CdskUsedHigh | 1.3.6.1.4.1.2021.9.1.16 | Unsigned32 | RO | 0 | |||||||||||||||||
column · Unsigned32 · read-only · current Used space on the disk (kBytes). Together with dskUsedLow composes 64-bit number. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CdskErrorFlag | 1.3.6.1.4.1.2021.9.1.100 | UCDErrorFlag | RO | 0 | |||||||||||||||||
column · UCDErrorFlag · read-only · current Error flag signaling that the disk or partition is under the minimum required space configured for it. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CdskErrorMsg | 1.3.6.1.4.1.2021.9.1.101 | DisplayString | RO | | |||||||||||||||||
column · DisplayString · read-only · current A text description providing a warning and the space left on the disk. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TlaTable | 1.3.6.1.4.1.2021.10 | NA | |||||||||||||||||||
table · not-accessible · current Load average information. | |||||||||||||||||||||
| RlaEntry | 1.3.6.1.4.1.2021.10.1 | NA | |||||||||||||||||||
| ClaIndex | 1.3.6.1.4.1.2021.10.1.1 | Integer32 (0..3) | RO | 1 | |||||||||||||||||
column · Integer32 (0..3) · read-only · current reference index/row number for each observed loadave. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClaNames | 1.3.6.1.4.1.2021.10.1.2 | DisplayString | RO | Load-1 | |||||||||||||||||
column · DisplayString · read-only · current The list of loadave names we're watching. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClaLoad | 1.3.6.1.4.1.2021.10.1.3 | DisplayString | RO | 0.18 | |||||||||||||||||
column · DisplayString · read-only · current The 1,5 and 15 minute load averages (one per row). Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClaConfig | 1.3.6.1.4.1.2021.10.1.4 | DisplayString | RW | 1 | |||||||||||||||||
column · DisplayString · read-write · current The watch point for load-averages to signal an error. If the load averages rises above this value, the laErrorFlag below is set. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClaLoadInt | 1.3.6.1.4.1.2021.10.1.5 | Integer32 | RO | 369 | |||||||||||||||||
column · Integer32 · read-only · current The 1,5 and 15 minute load averages as an integer. This is computed by taking the floating point loadaverage value and multiplying by 100, then converting the value to an integer. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClaLoadFloat | 1.3.6.1.4.1.2021.10.1.6 | Float | RO | Float: 0.080000 | |||||||||||||||||
column · Float · read-only · current The 1,5 and 15 minute load averages as an opaquely wrapped floating point number. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClaErrorFlag | 1.3.6.1.4.1.2021.10.1.100 | UCDErrorFlag | RO | 0 | |||||||||||||||||
column · UCDErrorFlag · read-only · current A Error flag to indicate the load-average has crossed its threshold value defined in the snmpd.conf file. It is set to 1 if the threshold is crossed, 0 otherwise. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClaErrMessage | 1.3.6.1.4.1.2021.10.1.101 | DisplayString | RO | | |||||||||||||||||
column · DisplayString · read-only · current An error message describing the load-average and its surpased watch-point value. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NsystemStats | 1.3.6.1.4.1.2021.11 | ||||||||||||||||||||
| SssIndex | 1.3.6.1.4.1.2021.11.1 | Integer32 | RO | 1 | |||||||||||||||||
scalar · Integer32 · read-only · current Bogus Index. This should always return the integer 1. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SssErrorName | 1.3.6.1.4.1.2021.11.2 | DisplayString | RO | swap | |||||||||||||||||
scalar · DisplayString · read-only · current Bogus Name. This should always return the string 'systemStats'. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SssSwapIn | 1.3.6.1.4.1.2021.11.3 | Integer32 | RO | 0 | |||||||||||||||||
scalar · Integer32 · read-only · current The average amount of memory swapped in from disk, calculated over the last minute.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SssSwapOut | 1.3.6.1.4.1.2021.11.4 | Integer32 | RO | 0 | |||||||||||||||||
scalar · Integer32 · read-only · current The average amount of memory swapped out to disk, calculated over the last minute.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SssIOSent | 1.3.6.1.4.1.2021.11.5 | Integer32 | RO | deprecated | 0 | ||||||||||||||||
scalar · Integer32 · read-only · deprecated The average amount of data written to disk or other
block device, calculated over the last minute.
This object has been deprecated in favour of
'ssIORawSent(57)', which can be used to calculate
the same metric, but over any desired time period.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SssIOReceive | 1.3.6.1.4.1.2021.11.6 | Integer32 | RO | deprecated | 0 | ||||||||||||||||
scalar · Integer32 · read-only · deprecated The average amount of data read from disk or other
block device, calculated over the last minute.
This object has been deprecated in favour of
'ssIORawReceived(58)', which can be used to calculate
the same metric, but over any desired time period.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SssSysInterrupts | 1.3.6.1.4.1.2021.11.7 | Integer32 | RO | deprecated | 108 | ||||||||||||||||
scalar · Integer32 · read-only · deprecated The average rate of interrupts processed (including
the clock) calculated over the last minute.
This object has been deprecated in favour of
'ssRawInterrupts(59)', which can be used to calculate
the same metric, but over any desired time period.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SssSysContext | 1.3.6.1.4.1.2021.11.8 | Integer32 | RO | deprecated | 513 | ||||||||||||||||
scalar · Integer32 · read-only · deprecated The average rate of context switches,
calculated over the last minute.
This object has been deprecated in favour of
'ssRawContext(60)', which can be used to calculate
the same metric, but over any desired time period.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| SssCpuUser | 1.3.6.1.4.1.2021.11.9 | Integer32 | RO | deprecated | 0 | ||||||||||||||||
scalar · Integer32 · read-only · deprecated The percentage of CPU time spent processing
user-level code, calculated over the last minute.
This object has been deprecated in favour of
'ssCpuRawUser(50)', which can be used to calculate
the same metric, but over any desired time period.Example values from LibreNMS test devices
| |||||||||||||||||||||
| SssCpuSystem | 1.3.6.1.4.1.2021.11.10 | Integer32 | RO | deprecated | 0 | ||||||||||||||||
scalar · Integer32 · read-only · deprecated The percentage of CPU time spent processing
system-level code, calculated over the last minute.
This object has been deprecated in favour of
'ssCpuRawSystem(52)', which can be used to calculate
the same metric, but over any desired time period.Example values from LibreNMS test devices
| |||||||||||||||||||||
| SssCpuIdle | 1.3.6.1.4.1.2021.11.11 | Integer32 | RO | deprecated | 100 | ||||||||||||||||
scalar · Integer32 · read-only · deprecated The percentage of processor time spent idle,
calculated over the last minute.
This object has been deprecated in favour of
'ssCpuRawIdle(53)', which can be used to calculate
the same metric, but over any desired time period.Example values from LibreNMS test devices
| |||||||||||||||||||||
| SssCpuRawUser | 1.3.6.1.4.1.2021.11.50 | Counter32 | RO | 2724945 | |||||||||||||||||
scalar · Counter32 · read-only · current The number of 'ticks' (typically 1/100s) spent processing user-level code. On a multi-processor system, the 'ssCpuRaw*' counters are cumulative over all CPUs, so their sum will typically be N*100 (for N processors). Example values from LibreNMS test devices
| |||||||||||||||||||||
| SssCpuRawNice | 1.3.6.1.4.1.2021.11.51 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current The number of 'ticks' (typically 1/100s) spent processing reduced-priority code. This object will not be implemented on hosts where the underlying operating system does not measure this particular CPU metric. On a multi-processor system, the 'ssCpuRaw*' counters are cumulative over all CPUs, so their sum will typically be N*100 (for N processors). Example values from LibreNMS test devices
| |||||||||||||||||||||
| SssCpuRawSystem | 1.3.6.1.4.1.2021.11.52 | Counter32 | RO | 1602590 | |||||||||||||||||
scalar · Counter32 · read-only · current The number of 'ticks' (typically 1/100s) spent processing system-level code. On a multi-processor system, the 'ssCpuRaw*' counters are cumulative over all CPUs, so their sum will typically be N*100 (for N processors). This object may sometimes be implemented as the combination of the 'ssCpuRawWait(54)' and 'ssCpuRawKernel(55)' counters, so care must be taken when summing the overall raw counters. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SssCpuRawIdle | 1.3.6.1.4.1.2021.11.53 | Counter32 | RO | 524253607 | |||||||||||||||||
scalar · Counter32 · read-only · current The number of 'ticks' (typically 1/100s) spent idle. On a multi-processor system, the 'ssCpuRaw*' counters are cumulative over all CPUs, so their sum will typically be N*100 (for N processors). Example values from LibreNMS test devices
| |||||||||||||||||||||
| SssCpuRawWait | 1.3.6.1.4.1.2021.11.54 | Counter32 | RO | 4 | |||||||||||||||||
scalar · Counter32 · read-only · current The number of 'ticks' (typically 1/100s) spent waiting for IO. This object will not be implemented on hosts where the underlying operating system does not measure this particular CPU metric. This time may also be included within the 'ssCpuRawSystem(52)' counter. On a multi-processor system, the 'ssCpuRaw*' counters are cumulative over all CPUs, so their sum will typically be N*100 (for N processors). Example values from LibreNMS test devices
| |||||||||||||||||||||
| SssCpuRawKernel | 1.3.6.1.4.1.2021.11.55 | Counter32 | RO | 1602586 | |||||||||||||||||
scalar · Counter32 · read-only · current The number of 'ticks' (typically 1/100s) spent processing kernel-level code. This object will not be implemented on hosts where the underlying operating system does not measure this particular CPU metric. This time may also be included within the 'ssCpuRawSystem(52)' counter. On a multi-processor system, the 'ssCpuRaw*' counters are cumulative over all CPUs, so their sum will typically be N*100 (for N processors). Example values from LibreNMS test devices
| |||||||||||||||||||||
| SssCpuRawInterrupt | 1.3.6.1.4.1.2021.11.56 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current The number of 'ticks' (typically 1/100s) spent processing hardware interrupts. This object will not be implemented on hosts where the underlying operating system does not measure this particular CPU metric. On a multi-processor system, the 'ssCpuRaw*' counters are cumulative over all CPUs, so their sum will typically be N*100 (for N processors). Example values from LibreNMS test devices
| |||||||||||||||||||||
| SssIORawSent | 1.3.6.1.4.1.2021.11.57 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of blocks sent to a block device Example values from LibreNMS test devices
| |||||||||||||||||||||
| SssIORawReceived | 1.3.6.1.4.1.2021.11.58 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of blocks received from a block device Example values from LibreNMS test devices
| |||||||||||||||||||||
| SssRawInterrupts | 1.3.6.1.4.1.2021.11.59 | Counter32 | RO | 566699051 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of interrupts processed Example values from LibreNMS test devices
| |||||||||||||||||||||
| SssRawContexts | 1.3.6.1.4.1.2021.11.60 | Counter32 | RO | 2989540441 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of context switches Example values from LibreNMS test devices
| |||||||||||||||||||||
| SssCpuRawSoftIRQ | 1.3.6.1.4.1.2021.11.61 | Counter32 | RO | 232508 | |||||||||||||||||
scalar · Counter32 · read-only · current The number of 'ticks' (typically 1/100s) spent processing software interrupts. This object will not be implemented on hosts where the underlying operating system does not measure this particular CPU metric. On a multi-processor system, the 'ssCpuRaw*' counters are cumulative over all CPUs, so their sum will typically be N*100 (for N processors). Example values from LibreNMS test devices
| |||||||||||||||||||||
| SssRawSwapIn | 1.3.6.1.4.1.2021.11.62 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of blocks swapped in Example values from LibreNMS test devices
| |||||||||||||||||||||
| SssRawSwapOut | 1.3.6.1.4.1.2021.11.63 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current Number of blocks swapped out Example values from LibreNMS test devices
| |||||||||||||||||||||
| SssCpuRawSteal | 1.3.6.1.4.1.2021.11.64 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current The number of 'ticks' (typically 1/100s) spent by the hypervisor code to run other VMs even though the CPU in the current VM had something runnable. This object will not be implemented on hosts where the underlying operating system does not measure this particular CPU metric. On a multi-processor system, the 'ssCpuRaw*' counters are cumulative over all CPUs, so their sum will typically be N*100 (for N processors). Example values from LibreNMS test devices
| |||||||||||||||||||||
| SssCpuRawGuest | 1.3.6.1.4.1.2021.11.65 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current The number of 'ticks' (typically 1/100s) spent by the CPU to run a virtual CPU (guest). This object will not be implemented on hosts where the underlying operating system does not measure this particular CPU metric. On a multi-processor system, the 'ssCpuRaw*' counters are cumulative over all CPUs, so their sum will typically be N*100 (for N processors). Example values from LibreNMS test devices
| |||||||||||||||||||||
| SssCpuRawGuestNice | 1.3.6.1.4.1.2021.11.66 | Counter32 | RO | 0 | |||||||||||||||||
scalar · Counter32 · read-only · current The number of 'ticks' (typically 1/100s) spent by the CPU to run a niced virtual CPU (guest). This object will not be implemented on hosts where the underlying operating system does not measure this particular CPU metric. On a multi-processor system, the 'ssCpuRaw*' counters are cumulative over all CPUs, so their sum will typically be N*100 (for N processors). Example values from LibreNMS test devices
| |||||||||||||||||||||
| SssCpuNumCpus | 1.3.6.1.4.1.2021.11.67 | Integer32 | RO | 1 | |||||||||||||||||
scalar · Integer32 · read-only · current The number of processors, as counted by the agent. This object's value may be useful in the management of certain operating systems where notions such as load average do not take into account the number of processors in the system. For other objects in the systemStats group whose descriptions refer to 'N processors', this object's value is N. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NucdInternal | 1.3.6.1.4.1.2021.12 | ||||||||||||||||||||
| NucdExperimental | 1.3.6.1.4.1.2021.13 | ||||||||||||||||||||
| TfileTable | 1.3.6.1.4.1.2021.15 | NA | |||||||||||||||||||
table · not-accessible · current Table of monitored files. | |||||||||||||||||||||
| RfileEntry | 1.3.6.1.4.1.2021.15.1 | NA | |||||||||||||||||||
| CfileIndex | 1.3.6.1.4.1.2021.15.1.1 | Integer32 (0..2147483647) | RO | 1 | |||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current Index of file Example values from LibreNMS test devices
| |||||||||||||||||||||
| CfileName | 1.3.6.1.4.1.2021.15.1.2 | DisplayString | RO | /var/log/messages | |||||||||||||||||
column · DisplayString · read-only · current Filename Example values from LibreNMS test devices
| |||||||||||||||||||||
| CfileSize | 1.3.6.1.4.1.2021.15.1.3 | Integer32 | RO | 21334 | |||||||||||||||||
column · Integer32 · read-only · current Size of file (kB)
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CfileMax | 1.3.6.1.4.1.2021.15.1.4 | Integer32 | RO | 2097152 | |||||||||||||||||
column · Integer32 · read-only · current Limit of filesize (kB)
Example values from LibreNMS test devices
| |||||||||||||||||||||
| CfileErrorFlag | 1.3.6.1.4.1.2021.15.1.100 | UCDErrorFlag | RO | 0 | |||||||||||||||||
column · UCDErrorFlag · read-only · current Limit exceeded flag Example values from LibreNMS test devices
| |||||||||||||||||||||
| CfileErrorMsg | 1.3.6.1.4.1.2021.15.1.101 | DisplayString | RO | | |||||||||||||||||
column · DisplayString · read-only · current Filesize error message Example values from LibreNMS test devices
| |||||||||||||||||||||
| NlogMatch | 1.3.6.1.4.1.2021.16 | ||||||||||||||||||||
| SlogMatchMaxEntries | 1.3.6.1.4.1.2021.16.1 | Integer32 | RO | 250 | |||||||||||||||||
scalar · Integer32 · read-only · current The maximum number of logmatch entries this snmpd daemon can support. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TlogMatchTable | 1.3.6.1.4.1.2021.16.2 | NA | |||||||||||||||||||
table · not-accessible · current Table of monitored files. | |||||||||||||||||||||
| RlogMatchEntry | 1.3.6.1.4.1.2021.16.2.1 | NA | |||||||||||||||||||
| ClogMatchIndex | 1.3.6.1.4.1.2021.16.2.1.1 | Integer32 (1..2147483647) | RO | ||||||||||||||||||
column · Integer32 (1..2147483647) · read-only · current Index of logmatch | |||||||||||||||||||||
| ClogMatchName | 1.3.6.1.4.1.2021.16.2.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current logmatch instance name | |||||||||||||||||||||
| ClogMatchFilename | 1.3.6.1.4.1.2021.16.2.1.3 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current filename to be logmatched | |||||||||||||||||||||
| ClogMatchRegEx | 1.3.6.1.4.1.2021.16.2.1.4 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current regular expression | |||||||||||||||||||||
| ClogMatchGlobalCounter | 1.3.6.1.4.1.2021.16.2.1.5 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current global count of matches | |||||||||||||||||||||
| ClogMatchGlobalCount | 1.3.6.1.4.1.2021.16.2.1.6 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Description. | |||||||||||||||||||||
| ClogMatchCurrentCounter | 1.3.6.1.4.1.2021.16.2.1.7 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Regex match counter. This counter will be reset with each logfile rotation. | |||||||||||||||||||||
| ClogMatchCurrentCount | 1.3.6.1.4.1.2021.16.2.1.8 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Description. | |||||||||||||||||||||
| ClogMatchCounter | 1.3.6.1.4.1.2021.16.2.1.9 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Regex match counter. This counter will be reset with each read | |||||||||||||||||||||
| ClogMatchCount | 1.3.6.1.4.1.2021.16.2.1.10 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current Description. | |||||||||||||||||||||
| ClogMatchCycle | 1.3.6.1.4.1.2021.16.2.1.11 | Integer32 | RO | ||||||||||||||||||
column · Integer32 · read-only · current time between updates (if not queried) in seconds | |||||||||||||||||||||
| ClogMatchErrorFlag | 1.3.6.1.4.1.2021.16.2.1.100 | UCDErrorFlag | RO | ||||||||||||||||||
column · UCDErrorFlag · read-only · current errorflag: is this line configured correctly? | |||||||||||||||||||||
| ClogMatchRegExCompilation | 1.3.6.1.4.1.2021.16.2.1.101 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current message of regex precompilation | |||||||||||||||||||||
| Nversion | 1.3.6.1.4.1.2021.100 | ||||||||||||||||||||
| SversionIndex | 1.3.6.1.4.1.2021.100.1 | Integer32 | RO | 1 | |||||||||||||||||
scalar · Integer32 · read-only · current Index to mib (always 0) Example values from LibreNMS test devices
| |||||||||||||||||||||
| SversionTag | 1.3.6.1.4.1.2021.100.2 | DisplayString | RO | 5.7.2 | |||||||||||||||||
scalar · DisplayString · read-only · current CVS tag keyword Example values from LibreNMS test devices
| |||||||||||||||||||||
| SversionDate | 1.3.6.1.4.1.2021.100.3 | DisplayString | RO | $Date$ | |||||||||||||||||
scalar · DisplayString · read-only · current Date string from RCS keyword Example values from LibreNMS test devices
| |||||||||||||||||||||
| SversionCDate | 1.3.6.1.4.1.2021.100.4 | DisplayString | RO | Mon Aug 27 18:02:45 2018 | |||||||||||||||||
scalar · DisplayString · read-only · current Date string from ctime() Example values from LibreNMS test devices
| |||||||||||||||||||||
| SversionIdent | 1.3.6.1.4.1.2021.100.5 | DisplayString | RO | $Id$ | |||||||||||||||||
scalar · DisplayString · read-only · current Id string from RCS keyword Example values from LibreNMS test devices
| |||||||||||||||||||||
| SversionConfigureOptions | 1.3.6.1.4.1.2021.100.6 | DisplayString | RO | '--build=x86_64-linux' '--host=arm-ngacs-linux-… | |||||||||||||||||
scalar · DisplayString · read-only · current Options passed to the configure script when this agent was built. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SversionClearCache | 1.3.6.1.4.1.2021.100.10 | Integer32 | RW | 0 | |||||||||||||||||
scalar · Integer32 · read-write · current Set to 1 to clear the exec cache, if enabled Example values from LibreNMS test devices
| |||||||||||||||||||||
| SversionUpdateConfig | 1.3.6.1.4.1.2021.100.11 | Integer32 | RW | 0 | |||||||||||||||||
scalar · Integer32 · read-write · current Set to 1 to read-read the config file(s). Example values from LibreNMS test devices
| |||||||||||||||||||||
| SversionRestartAgent | 1.3.6.1.4.1.2021.100.12 | Integer32 | RW | 0 | |||||||||||||||||
scalar · Integer32 · read-write · current Set to 1 to restart the agent. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SversionSavePersistentData | 1.3.6.1.4.1.2021.100.13 | Integer32 | RW | 0 | |||||||||||||||||
scalar · Integer32 · read-write · current Set to 1 to force the agent to save it's persistent data immediately. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SversionDoDebugging | 1.3.6.1.4.1.2021.100.20 | Integer32 | RW | 0 | |||||||||||||||||
scalar · Integer32 · read-write · current Set to 1 to turn debugging statements on in the agent or 0 to turn it off. Example values from LibreNMS test devices
| |||||||||||||||||||||
| Nsnmperrs | 1.3.6.1.4.1.2021.101 | ||||||||||||||||||||
| SsnmperrIndex | 1.3.6.1.4.1.2021.101.1 | Integer32 | RO | 0 | |||||||||||||||||
scalar · Integer32 · read-only · current Bogus Index for snmperrs (always 0). Example values from LibreNMS test devices
| |||||||||||||||||||||
| SsnmperrNames | 1.3.6.1.4.1.2021.101.2 | DisplayString | RO | snmp | |||||||||||||||||
scalar · DisplayString · read-only · current snmp Example values from LibreNMS test devices
| |||||||||||||||||||||
| SsnmperrErrorFlag | 1.3.6.1.4.1.2021.101.100 | UCDErrorFlag | RO | 0 | |||||||||||||||||
scalar · UCDErrorFlag · read-only · current A Error flag to indicate trouble with the agent. It goes to 1 if there is an error, 0 if no error. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SsnmperrErrMessage | 1.3.6.1.4.1.2021.101.101 | DisplayString | RO | | |||||||||||||||||
scalar · DisplayString · read-only · current An error message describing the problem (if one exists). Example values from LibreNMS test devices
| |||||||||||||||||||||
| TmrTable | 1.3.6.1.4.1.2021.102 | NA | |||||||||||||||||||
table · not-accessible · current A table displaying all the oid's registered by mib modules in the agent. Since the agent is modular in nature, this lists each module's OID it is responsible for and the name of the module | |||||||||||||||||||||
| RmrEntry | 1.3.6.1.4.1.2021.102.1 | NA | |||||||||||||||||||
| CmrIndex | 1.3.6.1.4.1.2021.102.1.1 | OBJECT IDENTIFIER | RO | ||||||||||||||||||
column · OBJECT IDENTIFIER · read-only · current The registry slot of a mibmodule. | |||||||||||||||||||||
| CmrModuleName | 1.3.6.1.4.1.2021.102.1.2 | DisplayString | RO | ||||||||||||||||||
column · DisplayString · read-only · current The module name that registered this OID. | |||||||||||||||||||||
| NucdSnmpAgent | 1.3.6.1.4.1.2021.250 | ||||||||||||||||||||
| Nhpux9 | 1.3.6.1.4.1.2021.250.1 | ||||||||||||||||||||
| Nsunos4 | 1.3.6.1.4.1.2021.250.2 | ||||||||||||||||||||
| Nsolaris | 1.3.6.1.4.1.2021.250.3 | ||||||||||||||||||||
| Nosf | 1.3.6.1.4.1.2021.250.4 | ||||||||||||||||||||
| Nultrix | 1.3.6.1.4.1.2021.250.5 | ||||||||||||||||||||
| Nhpux10 | 1.3.6.1.4.1.2021.250.6 | ||||||||||||||||||||
| Nnetbsd1 | 1.3.6.1.4.1.2021.250.7 | ||||||||||||||||||||
| Nfreebsd | 1.3.6.1.4.1.2021.250.8 | ||||||||||||||||||||
| Nirix | 1.3.6.1.4.1.2021.250.9 | ||||||||||||||||||||
| Nlinux | 1.3.6.1.4.1.2021.250.10 | ||||||||||||||||||||
| Nbsdi | 1.3.6.1.4.1.2021.250.11 | ||||||||||||||||||||
| Nopenbsd | 1.3.6.1.4.1.2021.250.12 | ||||||||||||||||||||
| Nwin32 | 1.3.6.1.4.1.2021.250.13 | ||||||||||||||||||||
| Nhpux11 | 1.3.6.1.4.1.2021.250.14 | ||||||||||||||||||||
| Naix | 1.3.6.1.4.1.2021.250.15 | ||||||||||||||||||||
| Nmacosx | 1.3.6.1.4.1.2021.250.16 | ||||||||||||||||||||
| Ndragonfly | 1.3.6.1.4.1.2021.250.17 | ||||||||||||||||||||
| Nunknown | 1.3.6.1.4.1.2021.250.255 | ||||||||||||||||||||
| NucdTraps | 1.3.6.1.4.1.2021.251 | ||||||||||||||||||||
| !ucdStart | 1.3.6.1.4.1.2021.251.1 | ||||||||||||||||||||
notification · current This trap could in principle be sent when the agent start | |||||||||||||||||||||
| !ucdShutdown | 1.3.6.1.4.1.2021.251.2 | ||||||||||||||||||||
notification · current This trap is sent when the agent terminates | |||||||||||||||||||||
Textual conventions
FloatOpaque (SIZE (7))A single precision floating-point number. The semantics and encoding are identical for type 'single' defined in IEEE Standard for Binary Floating-Point, ANSI/IEEE Std 754-1985. The value is restricted to the BER serialization of the following ASN.1 type: FLOATTYPE ::= [120] IMPLICIT FloatType (note: the value 120 is the sum of '30'h and '48'h) The BER serialization of the length for values of this type must use the definite length, short encoding form. For example, the BER serialization of value 123 of type FLOATTYPE is '9f780442f60000'h. (The tag is '9f78'h; the length is '04'h; and the value is '42f60000'h.) The BER serialization of value '9f780442f60000'h of data type Opaque is '44079f780442f60000'h. (The tag is '44'h; the length is '07'h; and the value is '9f780442f60000'h.
UCDErrorFixINTEGERnoError(0)runFix(1)Represents a 'push-button' object, to invoke a suitable configured action. Will always return 0 when read.
UCDErrorFlagINTEGERerror(1)noError(0)Represents a possible error condition
Traps / Notifications
- ucdShutdown
1.3.6.1.4.1.2021.251.2 - ucdStart
1.3.6.1.4.1.2021.251.1