SNMP-COMMUNITY-MIB
Standards (IETF)This MIB module defines objects to help support coexistence between SNMPv1, SNMPv2c, and SNMPv3. Copyright (C) The Internet Society (2003) This version of this MIB module is part of RFC 3584; see the RFC itself for full legal notices.
snmptranslate -m SNMP-COMMUNITY-MIB -Tpsnmpwalk -v2c -c <community> -m SNMP-COMMUNITY-MIB <host> 1.3.6.1.6.3.18Imports
| SNMP-FRAMEWORK-MIB | SnmpAdminString, SnmpEngineID |
|---|---|
| SNMP-TARGET-MIB | SnmpTagValue, snmpTargetAddrEntry |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso, snmpModules |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, StorageType, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IsnmpCommunityMIB | 1.3.6.1.6.3.18 | ||||||||||||||||||||
identity This MIB module defines objects to help support coexistence between SNMPv1, SNMPv2c, and SNMPv3. Copyright (C) The Internet Society (2003) This version of this MIB module is part of RFC 3584; see the RFC itself for full legal notices. | |||||||||||||||||||||
| NsnmpCommunityMIBObjects | 1.3.6.1.6.3.18.1 | ||||||||||||||||||||
| TsnmpCommunityTable | 1.3.6.1.6.3.18.1.1 | NA | |||||||||||||||||||
table · not-accessible · current The table of community strings configured in the SNMP engine's Local Configuration Datastore (LCD). | |||||||||||||||||||||
| RsnmpCommunityEntry | 1.3.6.1.6.3.18.1.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Information about a particular community string.
| |||||||||||||||||||||
| CsnmpCommunityIndex | 1.3.6.1.6.3.18.1.1.1.1 | SnmpAdminString (SIZE (1..32)) | NA | ||||||||||||||||||
column · SnmpAdminString (SIZE (1..32)) · not-accessible · current The unique index value of a row in this table. | |||||||||||||||||||||
| CsnmpCommunityName | 1.3.6.1.6.3.18.1.1.1.2 | OCTET STRING | RC | publicxx | |||||||||||||||||
column · OCTET STRING · read-create · current The community string for which a row in this table represents a configuration. There is no SIZE constraint specified for this object because RFC 1157 does not impose any explicit limitation on the length of community strings (their size is constrained indirectly by the SNMP message size). Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsnmpCommunitySecurityName | 1.3.6.1.6.3.18.1.1.1.3 | SnmpAdminString (SIZE (1..32)) | RC | publicuser | |||||||||||||||||
column · SnmpAdminString (SIZE (1..32)) · read-create · current A human readable string representing the corresponding value of snmpCommunityName in a Security Model independent format. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsnmpCommunityContextEngineID | 1.3.6.1.6.3.18.1.1.1.4 | SnmpEngineID | RC | | |||||||||||||||||
column · SnmpEngineID · read-create · current The contextEngineID indicating the location of the context in which management information is accessed when using the community string specified by the corresponding instance of snmpCommunityName. The default value is the snmpEngineID of the entity in which this object is instantiated. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsnmpCommunityContextName | 1.3.6.1.6.3.18.1.1.1.5 | SnmpAdminString (SIZE (0..32)) | RC | | |||||||||||||||||
column · SnmpAdminString (SIZE (0..32)) · read-create · current The context in which management information is accessed when using the community string specified by the corresponding instance of snmpCommunityName. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsnmpCommunityTransportTag | 1.3.6.1.6.3.18.1.1.1.6 | SnmpTagValue | RC | | |||||||||||||||||
column · SnmpTagValue · read-create · current This object specifies a set of transport endpoints
which are used in two ways:
- to specify the transport endpoints from which an
SNMP entity will accept management requests, and
- to specify the transport endpoints to which a
notification may be sent using the community
string matching the corresponding instance of
snmpCommunityName.
In either case, if the value of this object has
zero-length, transport endpoints are not checked when
either authenticating messages containing this community
string, nor when generating notifications.
The transports identified by this object are specified
in the snmpTargetAddrTable. Entries in that table
whose snmpTargetAddrTagList contains this tag value
are identified.
If a management request containing a community string
that matches the corresponding instance of
snmpCommunityName is received on a transport endpoint
other than the transport endpoints identified by this
object the request is deemed unauthentic.
When a notification is to be sent using an entry in
this table, if the destination transport endpoint of
the notification does not match one of the transport
endpoints selected by this object, the notification
is not sent.Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsnmpCommunityStorageType | 1.3.6.1.6.3.18.1.1.1.7 | StorageType | RC | 4 | |||||||||||||||||
column · StorageType · read-create · current The storage type for this conceptual row in the snmpCommunityTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar object in the row. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsnmpCommunityStatus | 1.3.6.1.6.3.18.1.1.1.8 | RowStatus | RC | 1 | |||||||||||||||||
column · RowStatus · read-create · current The status of this conceptual row in the snmpCommunityTable. An entry in this table is not qualified for activation until instances of all corresponding columns have been initialized, either through default values, or through Set operations. The snmpCommunityName and snmpCommunitySecurityName objects must be explicitly set. There is no restriction on setting columns in this table when the value of snmpCommunityStatus is active(1). Example values from LibreNMS test devices
| |||||||||||||||||||||
| TsnmpTargetAddrExtTable | 1.3.6.1.6.3.18.1.2 | NA | |||||||||||||||||||
table · not-accessible · current The table of mask and maximum message size (mms) values associated with the snmpTargetAddrTable. The snmpTargetAddrExtTable augments the snmpTargetAddrTable with a transport address mask value and a maximum message size value. The transport address mask allows entries in the snmpTargetAddrTable to define a set of addresses instead of just a single address. The maximum message size value allows the maximum message size of another SNMP entity to be configured for use in SNMPv1 (and SNMPv2c) transactions, where the message format does not specify a maximum message size. | |||||||||||||||||||||
| RsnmpTargetAddrExtEntry | 1.3.6.1.6.3.18.1.2.1 | NA | |||||||||||||||||||
row · not-accessible · current Information about a particular mask and mms value.
| |||||||||||||||||||||
| CsnmpTargetAddrTMask | 1.3.6.1.6.3.18.1.2.1.1 | OCTET STRING (SIZE (0..255)) | RC | | |||||||||||||||||
column · OCTET STRING (SIZE (0..255)) · read-create · current The mask value associated with an entry in the snmpTargetAddrTable. The value of this object must have the same length as the corresponding instance of snmpTargetAddrTAddress, or must have length 0. An attempt to set it to any other value will result in an inconsistentValue error. The value of this object allows an entry in the snmpTargetAddrTable to specify multiple addresses. The mask value is used to select which bits of a transport address must match bits of the corresponding instance of snmpTargetAddrTAddress, in order for the transport address to match a particular entry in the snmpTargetAddrTable. Bits which are 1 in the mask value indicate bits in the transport address which must match bits in the snmpTargetAddrTAddress value. Bits which are 0 in the mask indicate bits in the transport address which need not match. If the length of the mask is 0, the mask should be treated as if all its bits were 1 and its length were equal to the length of the corresponding value of snmpTargetAddrTable. This object may not be modified while the value of the corresponding instance of snmpTargetAddrRowStatus is active(1). An attempt to set this object in this case will result in an inconsistentValue error. Example values from LibreNMS test devices
| |||||||||||||||||||||
| CsnmpTargetAddrMMS | 1.3.6.1.6.3.18.1.2.1.2 | Integer32 (0 | 484..2147483647) | RC | 484 | |||||||||||||||||
column · Integer32 (0 | 484..2147483647) · read-create · current The maximum message size value associated with an entry in the snmpTargetAddrTable. Note that a value of 0 means that the maximum message size is unknown. Example values from LibreNMS test devices
| |||||||||||||||||||||
| SsnmpTrapAddress | 1.3.6.1.6.3.18.1.3 | IpAddress | AN | ||||||||||||||||||
scalar · IpAddress · accessible-for-notify · current The value of the agent-addr field of a Trap PDU which is forwarded by a proxy forwarder application using an SNMP version other than SNMPv1. The value of this object SHOULD contain the value of the agent-addr field from the original Trap PDU as generated by an SNMPv1 agent. | |||||||||||||||||||||
| SsnmpTrapCommunity | 1.3.6.1.6.3.18.1.4 | OCTET STRING | AN | ||||||||||||||||||
scalar · OCTET STRING · accessible-for-notify · current The value of the community string field of an SNMPv1 message containing a Trap PDU which is forwarded by a a proxy forwarder application using an SNMP version other than SNMPv1. The value of this object SHOULD contain the value of the community string field from the original SNMPv1 message containing a Trap PDU as generated by an SNMPv1 agent. There is no SIZE constraint specified for this object because RFC 1157 does not impose any explicit limitation on the length of community strings (their size is constrained indirectly by the SNMP message size). | |||||||||||||||||||||
| NsnmpCommunityMIBConformance | 1.3.6.1.6.3.18.2 | ||||||||||||||||||||
| NsnmpCommunityMIBCompliances | 1.3.6.1.6.3.18.2.1 | ||||||||||||||||||||
| MsnmpCommunityMIBCompliance | 1.3.6.1.6.3.18.2.1.1 | ||||||||||||||||||||
compliance · current The compliance statement for SNMP engines which implement the SNMP-COMMUNITY-MIB.
| |||||||||||||||||||||
| MsnmpProxyTrapForwardCompliance | 1.3.6.1.6.3.18.2.1.2 | ||||||||||||||||||||
compliance · current The compliance statement for SNMP engines which contain a proxy forwarding application which is capable of forwarding SNMPv1 traps using SNMPv2c or SNMPv3.
| |||||||||||||||||||||
| MsnmpCommunityMIBFullCompliance | 1.3.6.1.6.3.18.2.1.3 | ||||||||||||||||||||
compliance · current The compliance statement for SNMP engines which implement the SNMP-COMMUNITY-MIB with full read-create access.
| |||||||||||||||||||||
| NsnmpCommunityMIBGroups | 1.3.6.1.6.3.18.2.2 | ||||||||||||||||||||
| GsnmpCommunityTableGroup | 1.3.6.1.6.3.18.2.2.1 | ||||||||||||||||||||
group · current A collection of objects providing for configuration of community strings for SNMPv1 (and SNMPv2c) usage. | |||||||||||||||||||||
| GsnmpProxyTrapForwardGroup | 1.3.6.1.6.3.18.2.2.3 | ||||||||||||||||||||
group · current Objects which are used by proxy forwarding applications when translating traps between SNMP versions. These are used to preserve SNMPv1-specific information when translating to SNMPv2c or SNMPv3.
| |||||||||||||||||||||
Groups and compliance
Used by
- CISCOSB-SNMP-MIB (cisco)
- LINKSYS-SNMP-MIB (linksys)
- RADLAN-SNMP-MIB (radlan)
- TIMETRA-SYSTEM-MIB (nokia)