RS-232-MIB
Standards (IETF)The MIB module for RS-232-like hardware devices.
snmptranslate -m RS-232-MIB -Tpsnmpwalk -v2c -c <community> -m RS-232-MIB <host> 1.3.6.1.2.1.10.33Imports
| IF-MIB | InterfaceIndex |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso, transmission |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Irs232 | 1.3.6.1.2.1.10.33 | ||||||||||||||||||||
identity The MIB module for RS-232-like hardware devices. | |||||||||||||||||||||
| Srs232Number | 1.3.6.1.2.1.10.33.1 | Integer32 | RO | 2 | |||||||||||||||||
scalar · Integer32 · read-only · current The number of ports (regardless of their current state) in the RS-232-like general port table. Example values from LibreNMS test devices
| |||||||||||||||||||||
| Trs232PortTable | 1.3.6.1.2.1.10.33.2 | NA | |||||||||||||||||||
table · not-accessible · current A list of port entries. The number of entries is given by the value of rs232Number. | |||||||||||||||||||||
| Rrs232PortEntry | 1.3.6.1.2.1.10.33.2.1 | NA | |||||||||||||||||||
| Crs232PortIndex | 1.3.6.1.2.1.10.33.2.1.1 | InterfaceIndex | RO | 1 | |||||||||||||||||
column · InterfaceIndex · read-only · current The value of ifIndex for the port. By convention and if possible, hardware port numbers map directly to external connectors. The value for each port must remain constant at least from one re-initialization of the network management agent to the next. Example values from LibreNMS test devices
| |||||||||||||||||||||
| Crs232PortType | 1.3.6.1.2.1.10.33.2.1.2 | INTEGER | RO | rs232(2) | |||||||||||||||||
column · INTEGER · read-only · current The port's hardware type.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| Crs232PortInSigNumber | 1.3.6.1.2.1.10.33.2.1.3 | Integer32 | RO | 3 | |||||||||||||||||
column · Integer32 · read-only · current The number of input signals for the port in the input signal table (rs232PortInSigTable). The table contains entries only for those signals the software can detect and that are useful to observe. Example values from LibreNMS test devices
| |||||||||||||||||||||
| Crs232PortOutSigNumber | 1.3.6.1.2.1.10.33.2.1.4 | Integer32 | RO | 2 | |||||||||||||||||
column · Integer32 · read-only · current The number of output signals for the port in the output signal table (rs232PortOutSigTable). The table contains entries only for those signals the software can assert and that are useful to observe. Example values from LibreNMS test devices
| |||||||||||||||||||||
| Crs232PortInSpeed | 1.3.6.1.2.1.10.33.2.1.5 | Integer32 | RW | 9600 | |||||||||||||||||
column · Integer32 · read-write · current The port's input speed in bits per second. Note that non-standard values, such as 9612, are probably not allowed on most implementations. Example values from LibreNMS test devices
| |||||||||||||||||||||
| Crs232PortOutSpeed | 1.3.6.1.2.1.10.33.2.1.6 | Integer32 | RW | 9600 | |||||||||||||||||
column · Integer32 · read-write · current The port's output speed in bits per second. Note that non-standard values, such as 9612, are probably not allowed on most implementations. Example values from LibreNMS test devices
| |||||||||||||||||||||
| Crs232PortInFlowType | 1.3.6.1.2.1.10.33.2.1.7 | INTEGER | RW | none(1) | |||||||||||||||||
column · INTEGER · read-write · current The port's type of input flow control. 'none' indicates no flow control at this level. 'ctsRts' and 'dsrDtr' indicate use of the indicated hardware signals.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| Crs232PortOutFlowType | 1.3.6.1.2.1.10.33.2.1.8 | INTEGER | RW | none(1) | |||||||||||||||||
column · INTEGER · read-write · current The port's type of output flow control. 'none' indicates no flow control at this level. 'ctsRts' and 'dsrDtr' indicate use of the indicated hardware signals.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| Trs232AsyncPortTable | 1.3.6.1.2.1.10.33.3 | NA | |||||||||||||||||||
table · not-accessible · current A list of asynchronous port entries. Entries need not exist for synchronous ports. | |||||||||||||||||||||
| Rrs232AsyncPortEntry | 1.3.6.1.2.1.10.33.3.1 | NA | |||||||||||||||||||
row · not-accessible · current Status and parameter values for an asynchronous port.
| |||||||||||||||||||||
| Crs232AsyncPortIndex | 1.3.6.1.2.1.10.33.3.1.1 | InterfaceIndex | RO | 1 | |||||||||||||||||
column · InterfaceIndex · read-only · current A unique value for each port. Its value is the same as rs232PortIndex for the port. Example values from LibreNMS test devices
| |||||||||||||||||||||
| Crs232AsyncPortBits | 1.3.6.1.2.1.10.33.3.1.2 | INTEGER (5..8) | RW | 8 | |||||||||||||||||
column · INTEGER (5..8) · read-write · current The port's number of bits in a character. Example values from LibreNMS test devices
| |||||||||||||||||||||
| Crs232AsyncPortStopBits | 1.3.6.1.2.1.10.33.3.1.3 | INTEGER | RW | one(1) | |||||||||||||||||
column · INTEGER · read-write · current The port's number of stop bits.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| Crs232AsyncPortParity | 1.3.6.1.2.1.10.33.3.1.4 | INTEGER | RW | none(1) | |||||||||||||||||
column · INTEGER · read-write · current The port's sense of a character parity bit.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| Crs232AsyncPortAutobaud | 1.3.6.1.2.1.10.33.3.1.5 | INTEGER | RW | disabled(2) | |||||||||||||||||
column · INTEGER · read-write · current A control for the port's ability to automatically sense input speed. When rs232PortAutoBaud is 'enabled', a port may autobaud to values different from the set values for speed, parity, and character size. As a result a network management system may temporarily observe values different from what was previously set.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| Crs232AsyncPortParityErrs | 1.3.6.1.2.1.10.33.3.1.6 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Total number of characters with a parity error, input from the port since system re-initialization and while the port state was 'up' or 'test'. Example values from LibreNMS test devices
| |||||||||||||||||||||
| Crs232AsyncPortFramingErrs | 1.3.6.1.2.1.10.33.3.1.7 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Total number of characters with a framing error, input from the port since system re-initialization and while the port state was 'up' or 'test'. Example values from LibreNMS test devices
| |||||||||||||||||||||
| Crs232AsyncPortOverrunErrs | 1.3.6.1.2.1.10.33.3.1.8 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current Total number of characters with an overrun error, input from the port since system re-initialization and while the port state was 'up' or 'test'. Example values from LibreNMS test devices
| |||||||||||||||||||||
| Trs232SyncPortTable | 1.3.6.1.2.1.10.33.4 | NA | |||||||||||||||||||
table · not-accessible · current A list of asynchronous port entries. Entries need not exist for synchronous ports. | |||||||||||||||||||||
| Rrs232SyncPortEntry | 1.3.6.1.2.1.10.33.4.1 | NA | |||||||||||||||||||
row · not-accessible · current Status and parameter values for a synchronous port.
| |||||||||||||||||||||
| Crs232SyncPortIndex | 1.3.6.1.2.1.10.33.4.1.1 | InterfaceIndex | RO | ||||||||||||||||||
column · InterfaceIndex · read-only · current A unique value for each port. Its value is the same as rs232PortIndex for the port. | |||||||||||||||||||||
| Crs232SyncPortClockSource | 1.3.6.1.2.1.10.33.4.1.2 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current Source of the port's bit rate clock. 'split' means the tranmit clock is internal and the receive clock is external.
| |||||||||||||||||||||
| Crs232SyncPortFrameCheckErrs | 1.3.6.1.2.1.10.33.4.1.3 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Total number of frames with an invalid frame check sequence, input from the port since system re-initialization and while the port state was 'up' or 'test'. | |||||||||||||||||||||
| Crs232SyncPortTransmitUnderrunErrs | 1.3.6.1.2.1.10.33.4.1.4 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Total number of frames that failed to be transmitted on the port since system re-initialization and while the port state was 'up' or 'test' because data was not available to the transmitter in time. | |||||||||||||||||||||
| Crs232SyncPortReceiveOverrunErrs | 1.3.6.1.2.1.10.33.4.1.5 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Total number of frames that failed to be received on the port since system re-initialization and while the port state was 'up' or 'test' because the receiver did not accept the data in time. | |||||||||||||||||||||
| Crs232SyncPortInterruptedFrames | 1.3.6.1.2.1.10.33.4.1.6 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Total number of frames that failed to be received or transmitted on the port due to loss of modem signals since system re-initialization and while the port state was 'up' or 'test'. | |||||||||||||||||||||
| Crs232SyncPortAbortedFrames | 1.3.6.1.2.1.10.33.4.1.7 | Counter32 | RO | ||||||||||||||||||
column · Counter32 · read-only · current Number of frames aborted on the port due to receiving an abort sequence since system re-initialization and while the port state was 'up' or 'test'. | |||||||||||||||||||||
| Crs232SyncPortRole | 1.3.6.1.2.1.10.33.4.1.8 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The role the device is playing that is using this port.
dte means the device is performing the role of
data terminal equipment
dce means the device is performing the role of
data circuit-terminating equipment.
| |||||||||||||||||||||
| Crs232SyncPortEncoding | 1.3.6.1.2.1.10.33.4.1.9 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The bit stream encoding technique that is in effect for this port. nrz for Non-Return to Zero encoding nrzi for Non-Return to Zero Inverted encoding.
| |||||||||||||||||||||
| Crs232SyncPortRTSControl | 1.3.6.1.2.1.10.33.4.1.10 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The method used to control the Request To Send (RTS)
signal.
controlled when the DTE is asserts RTS each time
data needs to be transmitted and drops
RTS at some point after data
transmission begins.
If rs232SyncPortRole is 'dte', the
RTS is an output signal. The device
will issue a RTS and wait for a CTS
from the DCE before starting to
transmit.
If rs232SyncPortRole is 'dce', the
RTS is an input signal. The device
will issue a CTS only after having
received RTS and waiting the
rs232SyncPortRTSCTSDelay interval.
constant when the DTE constantly asserts RTS.
| |||||||||||||||||||||
| Crs232SyncPortRTSCTSDelay | 1.3.6.1.2.1.10.33.4.1.11 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The interval (in milliseconds) that the DCE must wait after it sees RTS asserted before asserting CTS. This object exists in support of older synchronous devices that cannot recognize CTS within a certain interval after it asserts RTS. | |||||||||||||||||||||
| Crs232SyncPortMode | 1.3.6.1.2.1.10.33.4.1.12 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The mode of operation of the port with respect to the
direction and simultaneity of data transfer.
fdx when frames on the data link can be
transmitted and received at the same
time
hdx when frames can either be received
from the data link or transmitted
onto the data link but not at the
same time.
simplex-receive when frames can only be received on
this data link.
simplex-send when frames can only be sent on this
data link.
| |||||||||||||||||||||
| Crs232SyncPortIdlePattern | 1.3.6.1.2.1.10.33.4.1.13 | INTEGER | RW | ||||||||||||||||||
column · INTEGER · read-write · current The bit pattern used to indicate an idle line.
| |||||||||||||||||||||
| Crs232SyncPortMinFlags | 1.3.6.1.2.1.10.33.4.1.14 | Integer32 | RW | ||||||||||||||||||
column · Integer32 · read-write · current The minimum number of flag patterns this port needs in order to recognize the end of one frame and the start of the next. Plausible values are 1 and 2. | |||||||||||||||||||||
| Trs232InSigTable | 1.3.6.1.2.1.10.33.5 | NA | |||||||||||||||||||
table · not-accessible · current A list of port input control signal entries implemented and visible to the software on the port, and useful to monitor. | |||||||||||||||||||||
| Rrs232InSigEntry | 1.3.6.1.2.1.10.33.5.1 | NA | |||||||||||||||||||
row · not-accessible · current Input control signal status for a hardware port. | |||||||||||||||||||||
| Crs232InSigPortIndex | 1.3.6.1.2.1.10.33.5.1.1 | InterfaceIndex | RO | 1 | |||||||||||||||||
column · InterfaceIndex · read-only · current The value of rs232PortIndex for the port to which this entry belongs. Example values from LibreNMS test devices
| |||||||||||||||||||||
| Crs232InSigName | 1.3.6.1.2.1.10.33.5.1.2 | INTEGER | RO | cts(2) | |||||||||||||||||
column · INTEGER · read-only · current Identification of a hardware signal, as follows: rts Request to Send cts Clear to Send dsr Data Set Ready dtr Data Terminal Ready ri Ring Indicator dcd Received Line Signal Detector sq Signal Quality Detector srs Data Signaling Rate Selector srts Secondary Request to Send scts Secondary Clear to Send sdcd Secondary Received Line Signal Detector
Example values from LibreNMS test devices
| |||||||||||||||||||||
| Crs232InSigState | 1.3.6.1.2.1.10.33.5.1.3 | INTEGER | RO | off(3) | |||||||||||||||||
column · INTEGER · read-only · current The current signal state.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| Crs232InSigChanges | 1.3.6.1.2.1.10.33.5.1.4 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current The number of times the signal has changed from 'on' to 'off' or from 'off' to 'on'. Example values from LibreNMS test devices
| |||||||||||||||||||||
| Trs232OutSigTable | 1.3.6.1.2.1.10.33.6 | NA | |||||||||||||||||||
table · not-accessible · current A list of port output control signal entries implemented and visible to the software on the port, and useful to monitor. | |||||||||||||||||||||
| Rrs232OutSigEntry | 1.3.6.1.2.1.10.33.6.1 | NA | |||||||||||||||||||
row · not-accessible · current Output control signal status for a hardware port. | |||||||||||||||||||||
| Crs232OutSigPortIndex | 1.3.6.1.2.1.10.33.6.1.1 | InterfaceIndex | RO | 1 | |||||||||||||||||
column · InterfaceIndex · read-only · current The value of rs232PortIndex for the port to which this entry belongs. Example values from LibreNMS test devices
| |||||||||||||||||||||
| Crs232OutSigName | 1.3.6.1.2.1.10.33.6.1.2 | INTEGER | RO | rts(1) | |||||||||||||||||
column · INTEGER · read-only · current Identification of a hardware signal, as follows: rts Request to Send cts Clear to Send dsr Data Set Ready dtr Data Terminal Ready ri Ring Indicator dcd Received Line Signal Detector sq Signal Quality Detector srs Data Signaling Rate Selector srts Secondary Request to Send scts Secondary Clear to Send sdcd Secondary Received Line Signal Detector
Example values from LibreNMS test devices
| |||||||||||||||||||||
| Crs232OutSigState | 1.3.6.1.2.1.10.33.6.1.3 | INTEGER | RO | on(2) | |||||||||||||||||
column · INTEGER · read-only · current The current signal state.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| Crs232OutSigChanges | 1.3.6.1.2.1.10.33.6.1.4 | Counter32 | RO | 0 | |||||||||||||||||
column · Counter32 · read-only · current The number of times the signal has changed from 'on' to 'off' or from 'off' to 'on'. Example values from LibreNMS test devices
| |||||||||||||||||||||
| Nrs232Conformance | 1.3.6.1.2.1.10.33.7 | ||||||||||||||||||||
| Nrs232Groups | 1.3.6.1.2.1.10.33.7.1 | ||||||||||||||||||||
| Grs232Group | 1.3.6.1.2.1.10.33.7.1.1 | ||||||||||||||||||||
group · current A collection of objects providing information applicable to all RS-232-like interfaces.
| |||||||||||||||||||||
| Grs232AsyncGroup | 1.3.6.1.2.1.10.33.7.1.2 | ||||||||||||||||||||
group · current A collection of objects providing information applicable to asynchronous RS-232-like interfaces. | |||||||||||||||||||||
| Grs232SyncGroup | 1.3.6.1.2.1.10.33.7.1.3 | ||||||||||||||||||||
group · current A collection of objects providing information applicable to synchronous RS-232-like interfaces. | |||||||||||||||||||||
| Grs232SyncSDLCGroup | 1.3.6.1.2.1.10.33.7.1.4 | ||||||||||||||||||||
group · current A collection of objects providing information applicable to synchronous RS-232-like interfaces running SDLC. | |||||||||||||||||||||
| Nrs232Compliances | 1.3.6.1.2.1.10.33.7.2 | ||||||||||||||||||||
| Mrs232Compliance | 1.3.6.1.2.1.10.33.7.2.1 | ||||||||||||||||||||
compliance · current The compliance statement for SNMPv2 entities which have RS-232-like hardware interfaces.
| |||||||||||||||||||||