MIB Browser

PW-TC-STD-MIB

Standards (IETF)
This MIB module defines TEXTUAL-CONVENTIONS
for concepts used in pseudowire edge-to-edge
networks.

Copyright (c) 2009 IETF Trust and the persons identified
as authors of the code.  All rights reserved.

Redistribution and use in source and binary forms, with or
without modification, are permitted provided that the following
conditions are met:

- Redistributions of source code must retain the above
  copyright notice, this list of conditions and the following
  disclaimer.

- Redistributions in binary form must reproduce the above
  copyright notice, this list of conditions and the following
  disclaimer in the documentation and/or other materials
  provided with the distribution.

- Neither the name of Internet Society, IETF or IETF Trust, nor
  the names of specific contributors, may be used to endorse or
  promote products derived from this software without specific
  prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
CONTRIBUTORS 'AS IS' AND ANY EXPRESS OR IMPLIED WARRANTIES,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT OWNER OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

This version of this MIB module is part of RFC 5542;
see the RFC itself for full legal notices.
Organization
Pseudowire Edge-to-Edge Emulation (PWE3) Working Group
Root OID
1.3.6.1.2.1.188
Last updated
Objects
1
Source
Show full MIB
snmptranslate -m PW-TC-STD-MIB -Tp
snmpwalk -v2c -c <community> -m PW-TC-STD-MIB <host> 1.3.6.1.2.1.188

Imports

SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIBits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso, mib-2
SNMPv2-TCDisplayString, PhysAddress, TEXTUAL-CONVENTION

OID tree

NameOIDTypeAccessStatus
IpwTcStdMIB1.3.6.1.2.1.188

Textual conventions

PwAttachmentIdentifierType OCTET STRING (SIZE (0..255))
An octet string used in the generalized Forward Error
Correction (FEC) element for identifying attachment forwarder
and groups.  A NULL identifier is of zero length.
PwCfgIndexOrzero Unsigned32 (0..4294967295)

Display hint: d

Index in any of the relevant configuration tables for
supplement information regarding configuration of the
specific technology.  Value zero implies no additional
configuration information is applicable.
PwCwStatusTC INTEGER

cwNotPresent(6) cwPresent(5) illegalReceivedBit(4) notYetKnown(7) rxWithdrawWithWrongBitErrorCode(3) sentWrongBitErrorCode(2) waitingForNextMsg(1)

Indicates the status of the control word (CW) negotiation
based on the local configuration and the indications received
from the peer node.

waitingForNextMsg(1) indicates that the node is waiting for
another label mapping from the peer.

sentWrongBitErrorCode(2) indicates that the local node has
notified the peer about a mismatch in the C-bit.

rxWithdrawWithWrongBitErrorCode(3) indicates that a withdraw
message has been received with the wrong C-bit error code.

illegalReceivedBit(4) indicates a C-bit configuration with
the peer that is not compatible with the PW type.

cwPresent(5) indicates that the CW is present for this PW.
If signaling is used, the C-bit is set and agreed upon between
the nodes.  For manually configured PW, the local
configuration requires the use of the CW.

cwNotPresent(6) indicates that the CW is not present for this
PW.  If signaling is used, the C-bit is reset and agreed upon
between the nodes.  For manually configured PW, the local
configuration requires that the CW not be used.

notYetKnown(7) indicates that a label mapping has not yet
been received from the peer.
PwFragSize Unsigned32

Display hint: d

If set to a value other than zero, it indicates the desired
fragmentation length in bytes.  If set to zero,
fragmentation is not desired for PSN bound packets.
PwFragStatus Bits

cfgFragButRemoteIncapable(2) cfgFragGreaterThanPsnMtu(1) fragEnabled(4) noFrag(0) remoteFragCapable(3)

Indicates the status of the fragmentation/reassembly process
based on local configuration and peer capability.

noFrag(0) bit indicates that local configuration is for no
fragmentation.

cfgFragGreaterThanPsnMtu(1) bit indicates that the local node
is set to fragment, but the fragmentation size is greater
than the MTU available at the PSN between the nodes.
Fragmentation is not done in this case.

cfgFragButRemoteIncapable(2) bit indicates that the local
configuration conveys the desire for fragmentation but
the peer is not capable of reassembly.

remoteFragCapable(3) bit indicates that the remote node
is capable to accept fragmented PDUs.

fragEnabled(4) bit indicates that fragmentation will be used
on this PW.  Fragmentation can be used if the local node was
configured for fragmentation, the peer has the capability
to accept fragmented packets, and the CW is in use for this
PW.
PwGenIdType Unsigned32 (0..254)
Represents the Attachment Group Identifier (AGI) Type and
Attachment Individual Identifier (AII) Type in generalized FEC
signaling and configuration.
PwGroupID Unsigned32

Display hint: d

An administrative identification for grouping a
set of service-specific pseudowire services.
PwIDType Unsigned32

Display hint: d

Pseudowire Identifier.  Used to identify the PW
(together with some other fields) in the signaling
session.
PwIndexOrZeroType Unsigned32 (0..4294967295)

Display hint: d

This TEXTUAL-CONVENTION is an extension of the
PwIndexType convention.  The latter defines a greater-
than-zero value used to identify a pseudowire
in the managed system.  This extension permits the
additional value of zero.  The zero value is object-specific
and MUST therefore be defined as part of the description of
any object that uses this syntax.  Examples of the usage of
zero might include situations where pseudowire was unknown,
or where none or all pseudowires need to be referenced.
PwIndexType Unsigned32 (1..4294967295)

Display hint: d

Pseudowire Index.  A unique value, greater than zero,
for each locally defined PW.  Used for indexing
several MIB tables associated with the particular PW.
It is recommended that values are assigned contiguously
starting from 1.  The value for each PW MUST remain
constant at least from one re-initialization
to the next re-initialization.
PwOperStatusTC INTEGER

dormant(4) down(2) lowerLayerDown(6) notPresent(5) testing(3) up(1)

Indicates the operational status of the PW.

- up(1):             Ready to pass packets.
- down(2):           PW signaling is not yet finished, or
                     indications available at the service
                     level indicate that the PW is not
                     passing packets.
- testing(3):        AdminStatus at the PW level is set to
                     test.

- dormant(4):        The PW is not in a condition to pass
                     packets but is in a 'pending' state,
                     waiting for some external event.
- notPresent(5):     Some component is missing to accomplish
                     the setup of the PW.  It can be
                     configuration error, incomplete
                     configuration, or a missing H/W component.
- lowerLayerDown(6): One or more of the lower-layer interfaces
                     responsible for running the underlying PSN
                     is not in OperStatus 'up' state.
PwStatus Bits

psnPwRxFault(3) psnPwTxFault(4) pwNotForwarding(0) servicePwRxFault(1) servicePwTxFault(2)

Indicates the status of the PW and the interfaces affecting
this PW.  If none of the bits are set, it indicates no faults
are reported.

Used by