MIB Browser
The MIB module for physical topology information.
Organization
IETF; PTOPOMIB Working Group
Root OID
1.3.6.1.2.1.79
Last updated
Objects
44
Source
Show full MIB
snmptranslate -m PTOPO-MIB -Tp
snmpwalk -v2c -c <community> -m PTOPO-MIB <host> 1.3.6.1.2.1.79

Imports

ENTITY-MIBPhysicalIndex
IANA-ADDRESS-FAMILY-NUMBERS-MIBAddressFamilyNumbers
RMON2-MIBTimeFilter
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIBits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso, mib-2
SNMPv2-TCAutonomousType, DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TimeStamp, TruthValue

OID tree

NameOIDTypeAccessStatus
IptopoMIB1.3.6.1.2.1.79
NptopoMIBObjects1.3.6.1.2.1.79.1
NptopoData1.3.6.1.2.1.79.1.1
TptopoConnTable1.3.6.1.2.1.79.1.1.1NA
RptopoConnEntry1.3.6.1.2.1.79.1.1.1.1NA
CptopoConnTimeMark1.3.6.1.2.1.79.1.1.1.1.1TimeFilterNA
CptopoConnLocalChassis1.3.6.1.2.1.79.1.1.1.1.2PhysicalIndexNA
CptopoConnLocalPort1.3.6.1.2.1.79.1.1.1.1.3PhysicalIndexNA
CptopoConnIndex1.3.6.1.2.1.79.1.1.1.1.4Integer32 (1..2147483647)NA
CptopoConnRemoteChassisType1.3.6.1.2.1.79.1.1.1.1.5PtopoChassisIdTypeRC
CptopoConnRemoteChassis1.3.6.1.2.1.79.1.1.1.1.6PtopoChassisIdRC
CptopoConnRemotePortType1.3.6.1.2.1.79.1.1.1.1.7PtopoPortIdTypeRC
CptopoConnRemotePort1.3.6.1.2.1.79.1.1.1.1.8PtopoPortIdRC
CptopoConnDiscAlgorithm1.3.6.1.2.1.79.1.1.1.1.9AutonomousTypeRO
CptopoConnAgentNetAddrType1.3.6.1.2.1.79.1.1.1.1.10AddressFamilyNumbersRC
CptopoConnAgentNetAddr1.3.6.1.2.1.79.1.1.1.1.11PtopoGenAddrRC
CptopoConnMultiMacSASeen1.3.6.1.2.1.79.1.1.1.1.12PtopoAddrSeenStateRO
CptopoConnMultiNetSASeen1.3.6.1.2.1.79.1.1.1.1.13PtopoAddrSeenStateRO
CptopoConnIsStatic1.3.6.1.2.1.79.1.1.1.1.14TruthValueRC
CptopoConnLastVerifyTime1.3.6.1.2.1.79.1.1.1.1.15TimeStampRO
CptopoConnRowStatus1.3.6.1.2.1.79.1.1.1.1.16RowStatusRC
NptopoGeneral1.3.6.1.2.1.79.1.2
SptopoLastChangeTime1.3.6.1.2.1.79.1.2.1TimeStampRO
SptopoConnTabInserts1.3.6.1.2.1.79.1.2.2Counter32RO
SptopoConnTabDeletes1.3.6.1.2.1.79.1.2.3Counter32RO
SptopoConnTabDrops1.3.6.1.2.1.79.1.2.4Counter32RO
SptopoConnTabAgeouts1.3.6.1.2.1.79.1.2.5Counter32RO
NptopoConfig1.3.6.1.2.1.79.1.3
SptopoConfigTrapInterval1.3.6.1.2.1.79.1.3.1Integer32 (0 | 5..3600)RW
SptopoConfigMaxHoldTime1.3.6.1.2.1.79.1.3.2Integer32 (1..2147483647)RW
NptopoMIBNotifications1.3.6.1.2.1.79.2
NptopoMIBTrapPrefix1.3.6.1.2.1.79.2.0
!ptopoConfigChange1.3.6.1.2.1.79.2.0.1
NptopoRegistrationPoints1.3.6.1.2.1.79.3
NptopoDiscoveryMechanisms1.3.6.1.2.1.79.3.1
NptopoDiscoveryLocal1.3.6.1.2.1.79.3.1.1
NptopoConformance1.3.6.1.2.1.79.4
NptopoCompliances1.3.6.1.2.1.79.4.1
MptopoCompliance1.3.6.1.2.1.79.4.1.1
NptopoGroups1.3.6.1.2.1.79.4.2
GptopoDataGroup1.3.6.1.2.1.79.4.2.1
GptopoGeneralGroup1.3.6.1.2.1.79.4.2.2
GptopoConfigGroup1.3.6.1.2.1.79.4.2.3
GptopoNotificationsGroup1.3.6.1.2.1.79.4.2.4

Textual conventions

PtopoAddrSeenState INTEGER

multiAddr(4) notUsed(1) oneAddr(3) unknown(2)

This TC describes the state of address detection for a
particular type of port identifier used in the PTOPO MIB.

The enumeration 'notUsed(1)' represents an entry for which
the particular MIB object is not applicable to the remote
connection endpoint,

The enumeration 'unknown(2)' represents an entry for which
the particular address collection state is not known.

The enumeration 'oneAddr(3)'  represents an entry for which
exactly one source address (of the type indicated by the
particular MIB object), has been detected.

The enumeration 'multiAddr(4)'  represents an entry for
which more than one source address (of the type indicated by
the particular MIB object), has been detected.

An agent is expected to set the initial state of the
PtopoAddrSeenState to 'notUsed(1)' or 'unknown(2)'.

Note that the PTOPO MIB does not restrict or specify the
means in which the PtopoAddrSeenState is known to an agent.
In particular, an agent may detect this information through
configuration data, or some means other than directly
monitoring all port traffic.
PtopoChassisId OCTET STRING (SIZE (1..32))
This TC describes the format of a chassis identifier
string.  Objects of this type are always used with an
associated PtopoChassisIdType object, which identifies the
format of the particular PtopoChassisId object instance.

If the associated PtopoChassisIdType object has a value of
'chasIdEntPhysicalAlias(1)', then the octet string
identifies a particular instance of the entPhysicalAlias
object for a chassis component (i.e., an entPhysicalClass
value of 'chassis(3)').

If the associated PtopoChassisIdType object has a value of
'chasIdIfAlias(2)', then the octet string identifies a
particular instance of the ifAlias object for an interface
on the containing chassis.

If the associated PtopoChassisIdType object has a value of
'chasIdPortEntPhysicalAlias(3)', then the octet string
identifies a particular instance of the entPhysicalAlias
object for a port or backplane component within the
containing chassis.

If the associated PtopoChassisIdType object has a value of
'chasIdMacAddress(4)', then this string identifies a
particular unicast source MAC address (encoded in network
byte order and IEEE 802.3 canonical bit order), of a port on
the containing chassis.

If the associated PtopoChassisIdType object has a value of
'chasIdPtopoGenAddr(5)', then this string identifies a
particular network address, encoded in network byte order,
associated with one or more ports on the containing chassis.
The first octet contains the IANA Address Family Numbers
enumeration value for the specific address type, and octets
2 through N contain the PtopoGenAddr address value in
network byte order.
PtopoChassisIdType INTEGER

chasIdEntPhysicalAlias(1) chasIdIfAlias(2) chasIdMacAddress(4) chasIdPortEntPhysicalAlias(3) chasIdPtopoGenAddr(5)

This TC describes the source of a chassis identifier.

The enumeration 'chasIdEntPhysicalAlias(1)' represents a
chassis identifier based on the value of entPhysicalAlias
for a chassis component (i.e., an entPhysicalClass value of
'chassis(3)').

The enumeration 'chasIdIfAlias(2)' represents a chassis
identifier based on the value of ifAlias for an interface
on the containing chassis.

The enumeration 'chasIdPortEntPhysicalAlias(3)' represents
a chassis identifier based on the value of entPhysicalAlias
for a port or backplane component (i.e., entPhysicalClass
value of 'port(10)' or 'backplane(4)'), within the
containing chassis.

The enumeration 'chasIdMacAddress(4)' represents a chassis
identifier based on the value of a unicast source MAC
address (encoded in network byte order and IEEE 802.3
canonical bit order), of a port on the containing chassis.

The enumeration 'chasIdPtopoGenAddr(5)' represents a
chassis identifier based on a network address, associated
with a particular chassis.  The encoded address is actually
composed of two fields.  The first field is a single octet,
representing the IANA AddressFamilyNumbers value for the
specific address type, and the second field is the
PtopoGenAddr address value.
PtopoGenAddr OCTET STRING (SIZE (0..20))
The value of an address.
PtopoPortId OCTET STRING (SIZE (1..32))
This TC describes the format of a port identifier string.
Objects of this type are always used with an associated
PtopoPortIdType object, which identifies the format of the
particular PtopoPortId object instance.

If the associated PtopoPortIdType object has a value of
'portIdIfAlias(1)', then the octet string identifies a
particular instance of the ifAlias object.

If the associated PtopoPortIdType object has a value of
'portIdEntPhysicalAlias(2)', then the octet string
identifies a particular instance of the entPhysicalAlias
object for a port component (i.e., entPhysicalClass value of
'port(10)').

If the associated PtopoPortIdType object has a value of
'portIdMacAddr(3)', then this string identifies a particular
unicast source MAC address associated with the port.

If the associated PtopoPortIdType object has a value of
'portIdPtopoGenAddr(4)', then this string identifies a
network address associated with the port.  The first octet
contains the IANA AddressFamilyNumbers enumeration value for
the specific address type, and octets 2 through N contain

the PtopoGenAddr address value in network byte order.
PtopoPortIdType INTEGER

portIdEntPhysicalAlias(2) portIdIfAlias(1) portIdMacAddr(3) portIdPtopoGenAddr(4)

This TC describes the source of a particular type of port
identifier used in the PTOPO MIB.

The enumeration 'portIdIfAlias(1)' represents a port
identifier based on the ifAlias MIB object.


The enumeration 'portIdPortEntPhysicalAlias(2)' represents a
port identifier based on the value of entPhysicalAlias for a
port or backplane component (i.e., entPhysicalClass value of
'port(10)' or 'backplane(4)'), within the containing
chassis.

The enumeration 'portIdMacAddr(3)' represents a port
identifier based on a unicast source MAC address, which has
been detected by the agent and associated with a particular
port.

The enumeration 'portIdPtopoGenAddr(4)' represents a port
identifier based on a network address, detected by the agent
and associated with a particular port.