NetWare-Host-Ext-MIB
Novellsnmptranslate -m NetWare-Host-Ext-MIB -Tpsnmpwalk -v2c -c <community> -m NetWare-Host-Ext-MIB <host> 1.3.6.1.4.1.23Imports
| HOST-RESOURCES-MIB | hrDeviceIndex |
|---|---|
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| Nnovell | 1.3.6.1.4.1.23 | |||
| NmibDoc | 1.3.6.1.4.1.23.2 | |||
| NnwHostExtensions | 1.3.6.1.4.1.23.2.27 | |||
| NnwhrStorage | 1.3.6.1.4.1.23.2.27.2 | |||
| NnwhrStorageTypes | 1.3.6.1.4.1.23.2.27.2.1 | |||
| NnwhrStorageVolume | 1.3.6.1.4.1.23.2.27.2.1.1 | |||
| NnwhrStorageMemoryPermanent | 1.3.6.1.4.1.23.2.27.2.1.2 | |||
| NnwhrStorageMemoryAlloc | 1.3.6.1.4.1.23.2.27.2.1.3 | |||
| NnwhrStorageCacheBuffers | 1.3.6.1.4.1.23.2.27.2.1.4 | |||
| NnwhrStorageCacheMovable | 1.3.6.1.4.1.23.2.27.2.1.5 | |||
| NnwhrStorageCacheNonMovable | 1.3.6.1.4.1.23.2.27.2.1.6 | |||
| NnwhrStorageCodeAndDataMemory | 1.3.6.1.4.1.23.2.27.2.1.7 | |||
| NnwhrStorageDOSMemory | 1.3.6.1.4.1.23.2.27.2.1.8 | |||
| NnwhrStorageIOEngineMemory | 1.3.6.1.4.1.23.2.27.2.1.9 | |||
| NnwhrStorageMSEngineMemory | 1.3.6.1.4.1.23.2.27.2.1.10 | |||
| NnwhrStorageUnclaimedMemory | 1.3.6.1.4.1.23.2.27.2.1.11 | |||
| NnwhrDevice | 1.3.6.1.4.1.23.2.27.3 | |||
| NnwhrDeviceTypes | 1.3.6.1.4.1.23.2.27.3.1 | |||
| NnwhrDeviceMirroredServerLink | 1.3.6.1.4.1.23.2.27.3.1.1 | |||
| TnwhrDeviceTable | 1.3.6.1.4.1.23.2.27.3.2 | NA | mandatory | |
table · not-accessible · mandatory Extensions to the (conceptual) table of devices contained by the host | ||||
| RnwhrDeviceEntry | 1.3.6.1.4.1.23.2.27.3.2.1 | NA | mandatory | |
row · not-accessible · mandatory Extensions to a (conceptual) entry for one device contained by the host
| ||||
| CnwhrDeviceAdapterIndex | 1.3.6.1.4.1.23.2.27.3.2.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The index into the nwhrAdapterTable of the adapter/controller to which this device is attached (or physically manifested by, for logical device). Zero if not applicable. | ||||
| CnwhrDeviceControllerNumber | 1.3.6.1.4.1.23.2.27.3.2.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The controller number (relative to its adapter), or the SCSI target ID, or zero if not applicable. Note that zero is a valid value for both controller number and SCSI Target ID. | ||||
| CnwhrDeviceNumber | 1.3.6.1.4.1.23.2.27.3.2.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The device number (relative to its controller), or the SCSI LUN (Logical Unit Number), or zero if not applicable. Note that zero is a valid value for both device number and SCSI LUN. | ||||
| SnwhrProcessorCount | 1.3.6.1.4.1.23.2.27.3.3 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of processor devices contained in this host | ||||
| SnwhrPrinterCount | 1.3.6.1.4.1.23.2.27.3.4 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of printer devices contained in this host | ||||
| SnwhrDiskStorageCount | 1.3.6.1.4.1.23.2.27.3.5 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of Disk Storage devices contained in this host. | ||||
| TnwhrDiskStorageTable | 1.3.6.1.4.1.23.2.27.3.6 | NA | mandatory | |
table · not-accessible · mandatory Extensions to the hrDiskStorageTable | ||||
| RnwhrDiskStorageEntry | 1.3.6.1.4.1.23.2.27.3.6.1 | NA | mandatory | |
| CnwhrDiskStorageHeads | 1.3.6.1.4.1.23.2.27.3.6.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of read/write heads on the drive | ||||
| CnwhrDiskStorageCylinders | 1.3.6.1.4.1.23.2.27.3.6.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of cylinders on the drive. | ||||
| CnwhrDiskStorageSectorsPerTrack | 1.3.6.1.4.1.23.2.27.3.6.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of sectors per track on the drive. | ||||
| CnwhrDiskStorageSectorSize | 1.3.6.1.4.1.23.2.27.3.6.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The size of a sector in bytes. | ||||
| CnwhrDiskStorageBlockSize | 1.3.6.1.4.1.23.2.27.3.6.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The driver maximum I/O request size in bytes. | ||||
| TnwhrPhysicalPartitionTable | 1.3.6.1.4.1.23.2.27.3.7 | NA | mandatory | |
table · not-accessible · mandatory A table of physical partitions for long-term storage devices contained by the host. | ||||
| RnwhrPhysicalPartitionEntry | 1.3.6.1.4.1.23.2.27.3.7.1 | NA | mandatory | |
row · not-accessible · mandatory An entry for one partition. The hrDeviceIndex in the index represents the entry in the hrDeviceTable that corresponds to the nwhrPhysicalPartitionEntry. | ||||
| CnwhrPhysicalPartitionIndex | 1.3.6.1.4.1.23.2.27.3.7.1.1 | INTEGER (0..2147483647) | RO | mandatory |
column · INTEGER (0..2147483647) · read-only · mandatory A unique value for each physical partition on this long-term storage device. The value for each long-term storage device must remain constant from one re- initialization of the agent to the next re- initialization. | ||||
| CnwhrPhysicalPartitionType | 1.3.6.1.4.1.23.2.27.3.7.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The type of this physical partition.
| ||||
| CnwhrPhysicalPartitionDescr | 1.3.6.1.4.1.23.2.27.3.7.1.3 | InternationalDisplayString (SIZE (0..128)) | RO | mandatory |
column · InternationalDisplayString (SIZE (0..128)) · read-only · mandatory A textual description of this partition. | ||||
| CnwhrPhysicalPartitionSize | 1.3.6.1.4.1.23.2.27.3.7.1.4 | KBytes | RO | mandatory |
column · KBytes · read-only · mandatory The size (in Kilobytes) of this physical partition. | ||||
| TnwhrHotfixTable | 1.3.6.1.4.1.23.2.27.3.8 | NA | mandatory | |
table · not-accessible · mandatory The table of hotfix areas of diskStorage devices contained by the host. Note that this table is potentially sparse: an entry exists if the corresponding value of the hrDeviceType object is `hrDeviceDiskStorage' and a NetWare partition exists on the device. | ||||
| RnwhrHotfixEntry | 1.3.6.1.4.1.23.2.27.3.8.1 | NA | mandatory | |
row · not-accessible · mandatory An entry for one hotfix redirection area contained by the host. | ||||
| CnwhrHotfixUnits | 1.3.6.1.4.1.23.2.27.3.8.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The size, in bytes, of the hotfix blocks. | ||||
| CnwhrHotfixTotal | 1.3.6.1.4.1.23.2.27.3.8.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The size of the total hotfix redirection area represented by this entry, in units of nwhrHotfixUnits. | ||||
| CnwhrHotfixUsed | 1.3.6.1.4.1.23.2.27.3.8.1.3 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of hotfix redirected blocks, i.e. the number of bad blocks that hotfix has found. | ||||
| CnwhrHotfixReserved | 1.3.6.1.4.1.23.2.27.3.8.1.4 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of hotfix redirection blocks reserved for system use. | ||||
| SnwhrAdapterCount | 1.3.6.1.4.1.23.2.27.3.9 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of adapters contained in this host. | ||||
| TnwhrAdapterTable | 1.3.6.1.4.1.23.2.27.3.10 | NA | mandatory | |
table · not-accessible · mandatory General information for each adapter board in the host: driver name and version, Interrupt, DMA, I/O address, and number of attached devices. | ||||
| RnwhrAdapterEntry | 1.3.6.1.4.1.23.2.27.3.10.1 | NA | mandatory | |
row · not-accessible · mandatory General information for a particular adapter board in the host: driver name and version, Interrupt, DMA, I/O address, and number of attached devices.
| ||||
| CnwhrAdapterIndex | 1.3.6.1.4.1.23.2.27.3.10.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory A unique value for each adapter contained in the host. The value for each adapter must remain constant at least from one re-initialization of the agent to the next re-initialization. | ||||
| CnwhrAdapterType | 1.3.6.1.4.1.23.2.27.3.10.1.2 | OBJECT IDENTIFIER | RO | mandatory |
column · OBJECT IDENTIFIER · read-only · mandatory An indication of the type of adapter. This will typically be one of the possible values of hrDeviceType. | ||||
| CnwhrAdapterDescr | 1.3.6.1.4.1.23.2.27.3.10.1.3 | InternationalDisplayString (SIZE (0..128)) | RO | mandatory |
column · InternationalDisplayString (SIZE (0..128)) · read-only · mandatory A description the hardware for this adapter. This will usually include manufacturer, model, and version information. For LAN adapters, this could include the short board name and the boards burnt-in MAC address. | ||||
| CnwhrAdapterDriverDescr | 1.3.6.1.4.1.23.2.27.3.10.1.4 | InternationalDisplayString (SIZE (0..128)) | RO | mandatory |
column · InternationalDisplayString (SIZE (0..128)) · read-only · mandatory A textual description of the driver for this adapter | ||||
| CnwhrAdapterDriverMajorVer | 1.3.6.1.4.1.23.2.27.3.10.1.5 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The major version number of the adapter driver. | ||||
| CnwhrAdapterDriverMinorVer | 1.3.6.1.4.1.23.2.27.3.10.1.6 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The minor version number of the adapter driver. | ||||
| CnwhrAdapterPort1 | 1.3.6.1.4.1.23.2.27.3.10.1.7 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The primary I/O port block. This is the base address of a block of I/O addresses decoded by the adapter. The value will be zero if there is no I/O address associated with this adapter. | ||||
| CnwhrAdapterPort1Len | 1.3.6.1.4.1.23.2.27.3.10.1.8 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of I/O ports in the block starting at nwhrAdapterPort1. This value is used in conjunction with nwhrAdapterPort1 to determine the I/O block used by the adapter. The value will be zero if there is no I/O address associated with this adapter. | ||||
| CnwhrAdapterPort2 | 1.3.6.1.4.1.23.2.27.3.10.1.9 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The secondary I/O port block. This is the base address of a block of I/O addresses decoded by the adapter. The value will be zero if there is no secondary I/O address associated with this adapter. | ||||
| CnwhrAdapterPort2Len | 1.3.6.1.4.1.23.2.27.3.10.1.10 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of I/O ports in the block starting at nwhrAdapterPort2. This value is used in conjunction with nwhrAdapterPort2 to determine the secondary I/O block used by the adapter. The value will be zero if there is no I/O address associated with this adapter. | ||||
| CnwhrAdapterMem1 | 1.3.6.1.4.1.23.2.27.3.10.1.11 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The primary Memory Address. This is the base address of the primary block of memory space decoded by the adapter. The value will be zero if there is no memory address associated with this adapter. | ||||
| CnwhrAdapterMem1Len | 1.3.6.1.4.1.23.2.27.3.10.1.12 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The length, in bytes, of the primary memory address block. From this value and nwhrAdapterMem1, a determination can be made as to which memory address ranges are in use by the adapter. | ||||
| CnwhrAdapterMem2 | 1.3.6.1.4.1.23.2.27.3.10.1.13 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The secondary Memory Address. This is the address of the secondary block of memory space decoded by the adapter. The value will be zero if there is no secondary memory address associated with this adapter. | ||||
| CnwhrAdapterMem2Len | 1.3.6.1.4.1.23.2.27.3.10.1.14 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The length, in bytes, of the secondary memory address block. From this value and nwhrAdapterMem2, a determination can be made as to which memory address ranges are in use by the adapter. | ||||
| CnwhrAdapterDMA1 | 1.3.6.1.4.1.23.2.27.3.10.1.15 | INTEGER (0..255) | RO | mandatory |
column · INTEGER (0..255) · read-only · mandatory The primary DMA channel used by the adapter. The value will be 255 if this adapter does not use any DMA channel. | ||||
| CnwhrAdapterDMA2 | 1.3.6.1.4.1.23.2.27.3.10.1.16 | INTEGER (0..255) | RO | mandatory |
column · INTEGER (0..255) · read-only · mandatory The secondary DMA channel used by the adapter. The value will be 255 if this adapter does not use a secondary DMA channel. | ||||
| CnwhrAdapterInterrupt1 | 1.3.6.1.4.1.23.2.27.3.10.1.17 | INTEGER (0..255) | RO | mandatory |
column · INTEGER (0..255) · read-only · mandatory The primary interrupt vector used by the adapter. The value will be 255 if this adapter does not use any Interrupt. | ||||
| CnwhrAdapterInterrupt2 | 1.3.6.1.4.1.23.2.27.3.10.1.18 | INTEGER (0..255) | RO | mandatory |
column · INTEGER (0..255) · read-only · mandatory The secondary interrupt vector used by the adapter. The value will be 255 if this adapter does not use a secondary Interrupt. | ||||
| CnwhrAdapterSlot | 1.3.6.1.4.1.23.2.27.3.10.1.19 | INTEGER (0..65535) | RO | mandatory |
column · INTEGER (0..65535) · read-only · mandatory The slot in which the adapter resides. The value will be zero if the slot information is not available on the platform, such as an ISA based PC, otherwise the value will be the slot number the adapter resides. The slot number starts from 1. | ||||
| CnwhrAdapterDevices | 1.3.6.1.4.1.23.2.27.3.10.1.20 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The number of devices associated with this adapter. For instance, the number of drives attached to a disk controller. | ||||
| SnwhrMslCount | 1.3.6.1.4.1.23.2.27.3.11 | INTEGER | RO | mandatory |
scalar · INTEGER · read-only · mandatory The number of Mirrored Server Link (MSL) devices contained in this host. | ||||
| TnwhrMslTable | 1.3.6.1.4.1.23.2.27.3.12 | NA | mandatory | |
table · not-accessible · mandatory The (conceptual) table of Mirrored Server Link (MSL) devices contained by the host. Note that this table is potentially sparse: a (conceptual) entry exists only if the corresponding value of the hrDeviceType object is nwhrDeviceMirroredServerLink | ||||
| RnwhrMslEntry | 1.3.6.1.4.1.23.2.27.3.12.1 | NA | mandatory | |
row · not-accessible · mandatory A (conceptual) entry for one Mirrored Server Link (MSL) device contained by the host. The hrDeviceIndex in the index represents the entry in the hrDeviceTable that corresponds to the nwhrMslEntry.
| ||||
| CnwhrMslState | 1.3.6.1.4.1.23.2.27.3.12.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The current state of this MSL device.
| ||||
| CnwhrMslSpeed | 1.3.6.1.4.1.23.2.27.3.12.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The nominal bandwidth of the MSL link in bits per second. | ||||
| CnwhrMslSends | 1.3.6.1.4.1.23.2.27.3.12.1.3 | Counter | RO | mandatory |
column · Counter · read-only · mandatory The number of sends from this MSL device. | ||||
| CnwhrMslReceives | 1.3.6.1.4.1.23.2.27.3.12.1.4 | Counter | RO | mandatory |
column · Counter · read-only · mandatory The number of receives by this MSL device. | ||||
| CnwhrMslInErrors | 1.3.6.1.4.1.23.2.27.3.12.1.5 | Counter | RO | mandatory |
column · Counter · read-only · mandatory The number of errors in receives by this MSL device. | ||||
| CnwhrMslOutErrors | 1.3.6.1.4.1.23.2.27.3.12.1.6 | Counter | RO | mandatory |
column · Counter · read-only · mandatory The number of errors on sends by this MSL device. | ||||
| TnwhrPrinterTable | 1.3.6.1.4.1.23.2.27.3.13 | NA | mandatory | |
table · not-accessible · mandatory A set of data for each accessible printer, whether local or remote. | ||||
| RnwhrPrinterEntry | 1.3.6.1.4.1.23.2.27.3.13.1 | NA | mandatory | |
| CnwhrPrinterID | 1.3.6.1.4.1.23.2.27.3.13.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory A unique value for each accessible printer. This value will be constant for the lifetime of the mapping. | ||||
| CnwhrPrinterType | 1.3.6.1.4.1.23.2.27.3.13.1.2 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The type of the printer.
| ||||
| CnwhrPrinterLocalName | 1.3.6.1.4.1.23.2.27.3.13.1.3 | InternationalDisplayString | RO | mandatory |
column · InternationalDisplayString · read-only · mandatory The local name for the printer. | ||||
| CnwhrPrinterQueueName | 1.3.6.1.4.1.23.2.27.3.13.1.4 | InternationalDisplayString | RO | mandatory |
column · InternationalDisplayString · read-only · mandatory The name of the print queue associated with this printer. Zero length string if printer is local. | ||||
| CnwhrPrinterServerName | 1.3.6.1.4.1.23.2.27.3.13.1.5 | InternationalDisplayString | RO | mandatory |
column · InternationalDisplayString · read-only · mandatory The name of the server containing the print queue. Zero length string if printer is local. | ||||
| CnwhrPrinterTransportDomain | 1.3.6.1.4.1.23.2.27.3.13.1.6 | TransportDomain | RO | mandatory |
column · TransportDomain · read-only · mandatory The transport domain associated with the printer (print queue). | ||||
| CnwhrPrinterTransportAddress | 1.3.6.1.4.1.23.2.27.3.13.1.7 | TransportAddress | RO | mandatory |
column · TransportAddress · read-only · mandatory The transport address associated with this printer (print queue). Zero length string if printer is local. | ||||
| CnwhrPrinterDeviceIndex | 1.3.6.1.4.1.23.2.27.3.13.1.8 | INTEGER (0..2147483647) | RO | mandatory |
column · INTEGER (0..2147483647) · read-only · mandatory The value of hrDeviceIndex for this printer. Zero if non-local. | ||||
| NnwhrOdi | 1.3.6.1.4.1.23.2.27.10 | |||
| SnwhrLslOutPkts | 1.3.6.1.4.1.23.2.27.10.1 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory The total number of of SendPacket requests made to the LSL. | ||||
| SnwhrLslInPkts | 1.3.6.1.4.1.23.2.27.10.2 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory The total number of GetStackECB requests made by MLIDs to the LSL. | ||||
| SnwhrLslUnclaimedPkts | 1.3.6.1.4.1.23.2.27.10.3 | Counter | RO | mandatory |
scalar · Counter · read-only · mandatory The total number of times a packet was received and not consumed by a protocol stack. | ||||
| TnwhrProtocolTable | 1.3.6.1.4.1.23.2.27.10.4 | NA | mandatory | |
table · not-accessible · mandatory The Protocol Table provides basic information about protocols running in the host, management stations should refer to the appropriate protocol MIBs for the details about each protocol. | ||||
| RnwhrProtocolEntry | 1.3.6.1.4.1.23.2.27.10.4.1 | NA | mandatory | |
row · not-accessible · mandatory Information about a particular protocol. | ||||
| CnwhrProtocolName | 1.3.6.1.4.1.23.2.27.10.4.1.1 | InternationalDisplayString (SIZE (0..20)) | RO | mandatory |
column · InternationalDisplayString (SIZE (0..20)) · read-only · mandatory The protocol name, for example, IPX, IP, ARP. | ||||
| CnwhrProtocolID | 1.3.6.1.4.1.23.2.27.10.4.1.2 | OCTET STRING (SIZE (0..6)) | RO | mandatory |
column · OCTET STRING (SIZE (0..6)) · read-only · mandatory The protocol identifier For example: 000000000800 - IP for Ethernet II 00080007809B - AppleTalk for Ethernet SNAP | ||||
| CnwhrProtocolAddress | 1.3.6.1.4.1.23.2.27.10.4.1.3 | InternationalDisplayString | RO | mandatory |
column · InternationalDisplayString · read-only · mandatory This object provides protocol address information, for example, the Network Address on IPX network, the IP address on IP network. Note there is no format in the InternationalDisplayString and the information is not guaranteed available. | ||||
| CnwhrProtocolOutPkts | 1.3.6.1.4.1.23.2.27.10.4.1.4 | Counter | RO | mandatory |
column · Counter · read-only · mandatory The total number of send packet requests made to the LSL. | ||||
| CnwhrProtocolInPkts | 1.3.6.1.4.1.23.2.27.10.4.1.5 | Counter | RO | mandatory |
column · Counter · read-only · mandatory The total number of incoming packets that were consumed by the protocol. | ||||
| CnwhrProtocolIgnoredPkts | 1.3.6.1.4.1.23.2.27.10.4.1.6 | Counter | RO | mandatory |
column · Counter · read-only · mandatory The total number of times the protocol receive handler was called with look ahead and the protocol did not return a receive ECB to the MLID to receive the packet | ||||
| CnwhrProtocolFullName | 1.3.6.1.4.1.23.2.27.10.4.1.7 | InternationalDisplayString | RO | mandatory |
column · InternationalDisplayString · read-only · mandatory The full name of the protocol name, for example, 'DOD Internet Protocol'. | ||||
| CpysmiFakeCol1 | 1.3.6.1.4.1.23.2.27.10.4.1.4294967295 | INTEGER | NA | mandatory |
| TnwhrIfTable | 1.3.6.1.4.1.23.2.27.10.5 | NA | mandatory | |
table · not-accessible · mandatory Extensions to MIB-II's Interfaces table to add some NetWare specific info. | ||||
| RnwhrIfEntry | 1.3.6.1.4.1.23.2.27.10.5.1 | NA | mandatory | |
| CnwhrIfLogicalBoardNumber | 1.3.6.1.4.1.23.2.27.10.5.1.1 | INTEGER | RO | mandatory |
column · INTEGER · read-only · mandatory The logical board number. | ||||
| CnwhrIfFrameType | 1.3.6.1.4.1.23.2.27.10.5.1.2 | InternationalDisplayString | RO | mandatory |
column · InternationalDisplayString · read-only · mandatory The frame type for this logical board. | ||||
| CnwhrIfLogicalBoardName | 1.3.6.1.4.1.23.2.27.10.5.1.3 | InternationalDisplayString (SIZE (0..18)) | RO | mandatory |
column · InternationalDisplayString (SIZE (0..18)) · read-only · mandatory The name assigned to this logical board. | ||||
| CpysmiFakeCol2 | 1.3.6.1.4.1.23.2.27.10.5.1.4294967295 | INTEGER | NA | mandatory |