MSTP-MIB
Standards (IETF)The Bridge MIB Extension module for managing Sdevices that support the Multiple Spanning Tree Protocol defined by IEEE 802.1s.
snmptranslate -m MSTP-MIB -Tpsnmpwalk -v2c -c <community> -m MSTP-MIB <host> 1.3.6.1.2.1.17.8Imports
| BRIDGE-MIB | BridgeId, Timeout, dot1dBridge |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP |
| SNMPv2-SMI | Bits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, RowStatus, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status |
|---|---|---|---|---|
| ImstpMib | 1.3.6.1.2.1.17.8 | |||
identity The Bridge MIB Extension module for managing Sdevices that support the Multiple Spanning Tree Protocol defined by IEEE 802.1s. | ||||
| NmstpMIBObjects | 1.3.6.1.2.1.17.8.1 | |||
| Ndot1sStp | 1.3.6.1.2.1.17.8.1.1 | |||
| Sdot1sStpName | 1.3.6.1.2.1.17.8.1.1.1 | DisplayString (SIZE (0..32)) | RW | |
scalar · DisplayString (SIZE (0..32)) · read-write · current The configuration name that identifies the MST region and is used as one of the inputs in the computation of the MST Configuration Identifier. This object does not have any default value. | ||||
| Sdot1sStpRevision | 1.3.6.1.2.1.17.8.1.1.2 | Integer32 (0..65535) | RW | |
scalar · Integer32 (0..65535) · read-write · current This object identifies the MST revision that identifies the MST region and is used as one of the inputs in the computation of the MST configuration Identifier. This object does not have any default value. | ||||
| Sdot1sStpEnable | 1.3.6.1.2.1.17.8.1.1.3 | TruthValue | RO | |
scalar · TruthValue · read-only · current This parameter is used for enabling or disabling MST globally on all the bridging ports. | ||||
| Sdot1sStpBridgeMaxAge | 1.3.6.1.2.1.17.8.1.1.4 | Timeout (6..40) | RW | |
scalar · Timeout (6..40) · read-write · current The value that all bridges use for MaxAge when this bridge is acting as the root. This parameter is applicable for all MST Instances including CIST. | ||||
| Sdot1sStpBridgeHelloTime | 1.3.6.1.2.1.17.8.1.1.5 | Timeout (1..10) | RW | |
scalar · Timeout (1..10) · read-write · current The value that all bridges use for HelloTime when this bridge is acting as the root. This parameter is applicable for all MST Instances including CIST. | ||||
| Sdot1sStpBridgeForwardDelay | 1.3.6.1.2.1.17.8.1.1.6 | Timeout (4..30) | RW | |
scalar · Timeout (4..30) · read-write · current The value that all bridges use for ForwardDelay when this bridge is acting as the root. This parameter is applicable for all MST Instances including CIST. | ||||
| Sdot1sStpBridgeMaxHops | 1.3.6.1.2.1.17.8.1.1.7 | Unsigned32 (0..255) | RW | |
scalar · Unsigned32 (0..255) · read-write · current The maximum number of hops that the information for a particular Spanning Tree instance may traverse (via relay of BPDUs within the applicable MST region) before being discarded. This value is used only if this bridge is the CIST Regional Root and/or the MSTI Regional Root for one or more Multiple Spanning Tree instances. | ||||
| Sdot1sStpTxHoldCount | 1.3.6.1.2.1.17.8.1.1.8 | Integer32 (1..15) | RO | |
scalar · Integer32 (1..15) · read-only · current The value used by the Port Transmit state machine to limit the maximum transmission rate of MST BPDUs within the hello interval. | ||||
| Sdot1sStpProtocolSpecification | 1.3.6.1.2.1.17.8.1.1.9 | INTEGER | RO | |
scalar · INTEGER · read-only · current An indication of what version of the Spanning Tree Protocol is being run. The value 'decLb100(2)' indicates the DEC LANbridge 100 Spanning Tree protocol. IEEE 802.1w implementations will return 'ieee8021w(4)'. IEEE 802.1s implementations will return 'ieee8021s(5). If future versions of the IEEE Spanning Tree Protocol are released that are incompatible with the current version a new value will be defined.
| ||||
| Tdot1sStpInstTable | 1.3.6.1.2.1.17.8.1.1.10 | NA | ||
table · not-accessible · current A table that contains MST instance-specific configuration and operational information. | ||||
| Rdot1sStpInstEntry | 1.3.6.1.2.1.17.8.1.1.10.1 | NA | ||
row · not-accessible · current A list of information maintained by every mst instance about the STP topology for that instance.
| ||||
| Cdot1sStpInstId | 1.3.6.1.2.1.17.8.1.1.10.1.1 | Integer32 (1..64) | NA | |
column · Integer32 (1..64) · not-accessible · current Identifier of this MST Instance | ||||
| Cdot1sStpPriority | 1.3.6.1.2.1.17.8.1.1.10.1.2 | Integer32 (0..61440) | RW | |
column · Integer32 (0..61440) · read-write · current The value of the write-able portion of the Bridge ID, i.e., the first two octets, out of which the priority is the most significant 4 bits of the first octet of the (8 octet long) Bridge ID. The other (last) 6 octets of the Bridge ID are given by the value of dot1dBaseBridgeAddress in the BRIDGE-MIB. The value of this object should always be a multiple of 4096. | ||||
| Cdot1sStpInstTimeSinceTopologyChange | 1.3.6.1.2.1.17.8.1.1.10.1.3 | TimeTicks | RO | |
column · TimeTicks · read-only · current The time (in hundredths of a second) since the last time a topology change was detected by the bridge entity running MSTP. | ||||
| Cdot1sStpInstTopChanges | 1.3.6.1.2.1.17.8.1.1.10.1.4 | Counter32 | RO | |
column · Counter32 · read-only · current The total number of topology changes detected by this bridge entity running MST since the management entity was last reset or initialized. | ||||
| Cdot1sStpInstDesignatedRoot | 1.3.6.1.2.1.17.8.1.1.10.1.5 | BridgeId | RO | |
column · BridgeId · read-only · current The bridge identifier of the root of the corresponding spanning tree instance as determined by the Spanning Tree Protocol for that instance. This value is used as the CIST Root Identifier or MSTI regional root identifier parameter in all MST BPDUs originated by this node. | ||||
| Cdot1sStpInstRootCost | 1.3.6.1.2.1.17.8.1.1.10.1.6 | Integer32 | RO | |
column · Integer32 · read-only · current The cost of the path to the root as seen from this bridge for this instance. | ||||
| Cdot1sStpInstRootPort | 1.3.6.1.2.1.17.8.1.1.10.1.7 | Integer32 | RO | |
column · Integer32 · read-only · current The port number of the port which offers the lowest cost path from this bridge to the root bridge for this instance. | ||||
| Cdot1sStpInstMaxAge | 1.3.6.1.2.1.17.8.1.1.10.1.8 | Timeout | RO | |
column · Timeout · read-only · current The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value, which is advertised by the Root bridge and is currently used for this MST Instance. | ||||
| Cdot1sStpInstHelloTime | 1.3.6.1.2.1.17.8.1.1.10.1.9 | Timeout | RO | |
column · Timeout · read-only · current The period of time between the transmission of MST BPDUs by this node on any port when it is the root of the spanning tree or trying to become so, in units of hundredths of a second. This is the actual value, which is advertised by the Root bridge and is currently used for this MST Instance. | ||||
| Cdot1sStpInstForwardDelay | 1.3.6.1.2.1.17.8.1.1.10.1.10 | Timeout | RO | |
column · Timeout · read-only · current This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Discarding and Learning states, which precede the Forwarding state. This value is also used, when a topology change has been detected and is underway, to age all dynamic entries in the Forwarding Database. [Note that this value is the one that this bridge is currently using, in contrast to dot1sStpBridgeForwardDelay which is the value that this bridge and all others would start using if/when this bridge were to become the root.] | ||||
| Cdot1sStpInstAdminEnable | 1.3.6.1.2.1.17.8.1.1.10.1.11 | TruthValue | RW | |
column · TruthValue · read-write · current The administrative enabled/disabled status of the instance | ||||
| Cdot1sStpInstOperEnable | 1.3.6.1.2.1.17.8.1.1.10.1.12 | TruthValue | RO | |
column · TruthValue · read-only · current The operational enabled/disabled status of the instance. An MST Instance may be administratively enabled but may not be operationally running, for example, when no VLAN is mapped to that MST Instance. | ||||
| Tdot1sStpPortTable | 1.3.6.1.2.1.17.8.1.1.11 | NA | ||
table · not-accessible · current A table that contains MSTP ports' information. | ||||
| Rdot1sStpPortEntry | 1.3.6.1.2.1.17.8.1.1.11.1 | NA | ||
row · not-accessible · current A list of information maintained by every MST port about the Spanning Tree Protocol state for that port.
| ||||
| Cdot1sStpPort | 1.3.6.1.2.1.17.8.1.1.11.1.1 | Integer32 (0..65535) | NA | |
column · Integer32 (0..65535) · not-accessible · current The port number of the port for which this entry contains Spanning Tree Protocol management information. | ||||
| Cdot1sStpPortAdminEdgePort | 1.3.6.1.2.1.17.8.1.1.11.1.2 | TruthValue | RW | |
column · TruthValue · read-write · current The administrative value of the Edge Port parameter. A value of TRUE(1) indicates that this port should be assumed as an edge-port and a value of FALSE(2) indicates that this port should be assumed as a non-edge-port. | ||||
| Cdot1sStpPortAdminPointToPoint | 1.3.6.1.2.1.17.8.1.1.11.1.3 | INTEGER | RW | |
column · INTEGER · read-write · current The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(1) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of forceFalse(2) indicates that this port should be treated as having a shared media connection. A value of auto(3) indicates that this port is considered to have a point-to-point link if it is an Aggregator and all of its members are aggregatable, or if the MAC entity is configured for full duplex operation, either through auto-negotiation or by management means.
| ||||
| Cdot1sStpPortOperEdgePort | 1.3.6.1.2.1.17.8.1.1.11.1.4 | TruthValue | RO | |
column · TruthValue · read-only · current The operational value of the Edge Port parameter. A value of TRUE(1) indicates that this port should be assumed as an edge-port and a value of FALSE(2) indicates that this port should be assumed as a non-edge-port. | ||||
| Cdot1sStpPortOperPointToPoint | 1.3.6.1.2.1.17.8.1.1.11.1.5 | TruthValue | RO | |
column · TruthValue · read-only · current The operational point-to-point status of the LAN segment attached to this port. It indicates whether a port is considered to have a point-to-point connection or not. The value is determined by management or by auto-detection, as described in the dot1dStpPortAdminPointToPoint object. | ||||
| Cdot1sStpPortExterPathCost | 1.3.6.1.2.1.17.8.1.1.11.1.6 | Integer32 (1..200000000) | RW | |
column · Integer32 (1..200000000) · read-write · current The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. | ||||
| Cdot1sStpVersion | 1.3.6.1.2.1.17.8.1.1.11.1.7 | INTEGER | RO | |
column · INTEGER · read-only · current The version of Spanning Tree Protocol the bridge is currently running. The value 'stpCompatible(0)' indicates the Spanning Tree Protocol specified in IEEE 802.1D and 'rstp/mstp(2)' indicates the Rapid Spanning Tree Protocol specified in IEEE 802.1w and Multiple Spanning Tree Protocol specified in IEEE 802.1s. New value may be defined as future versions of the protocol become available.
| ||||
| Cdot1sStpPortSnoopingEnable | 1.3.6.1.2.1.17.8.1.1.11.1.8 | TruthValue | RW | |
column · TruthValue · read-write · current This parameter is used for enabling or disabling digest snooping on the bridge port. | ||||
| Tdot1sStpInstPortTable | 1.3.6.1.2.1.17.8.1.1.12 | NA | ||
table · not-accessible · current A table that contains MST port and instance information. | ||||
| Rdot1sStpInstPortEntry | 1.3.6.1.2.1.17.8.1.1.12.1 | NA | ||
row · not-accessible · current A list of information maintained by every MST port for each MST instance it belongs to about the Spanning Tree Protocol state for that port.
| ||||
| Cdot1sStpInstPortPriority | 1.3.6.1.2.1.17.8.1.1.12.1.1 | Integer32 (0..240) | RW | |
column · Integer32 (0..240) · read-write · current The value of the priority field which is contained in the most significant 4 bits of the first (in network byte order) octet of the (2 octet long) Port ID. As it is contained only in 4 bits, the value has to be a multiple of 16. The other octet of the Port ID is given by the value of dot1dStpPort. | ||||
| Cdot1sStpInstPortState | 1.3.6.1.2.1.17.8.1.1.12.1.2 | INTEGER | RW | |
column · INTEGER · read-write · current The port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. For ports which are disabled (see dot1dStpPortEnable), this object will have a value of disabled(1).
| ||||
| Cdot1sStpInstPortPathCost | 1.3.6.1.2.1.17.8.1.1.12.1.3 | Integer32 (1..200000000) | RW | |
column · Integer32 (1..200000000) · read-write · current The contribution of this port to the path cost of paths towards the spanning tree root which include this port. 802.1D-1990 recommends that the default value of this parameter be in inverse proportion to the speed of the attached LAN. | ||||
| Cdot1sStpInstPortDesignatedRoot | 1.3.6.1.2.1.17.8.1.1.12.1.4 | BridgeId | RO | |
column · BridgeId · read-only · current The unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is attached. | ||||
| Cdot1sStpInstPortDesignatedCost | 1.3.6.1.2.1.17.8.1.1.12.1.5 | Integer32 | RO | |
column · Integer32 · read-only · current The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs. | ||||
| Cdot1sStpInstPortDesignatedBridge | 1.3.6.1.2.1.17.8.1.1.12.1.6 | BridgeId | RO | |
column · BridgeId · read-only · current The Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment. | ||||
| Cdot1sStpInstPortDesignatedPort | 1.3.6.1.2.1.17.8.1.1.12.1.7 | OCTET STRING (SIZE (2)) | RO | |
column · OCTET STRING (SIZE (2)) · read-only · current The Port Identifier of the port on the Designated Bridge for this port's segment. | ||||
| Cdot1sStpInstPortForwardTransitions | 1.3.6.1.2.1.17.8.1.1.12.1.8 | Counter32 | RO | |
column · Counter32 · read-only · current The number of times this port has transitioned from the Learning state to the Forwarding state. | ||||
| Cdot1sStpInstPortRole | 1.3.6.1.2.1.17.8.1.1.12.1.9 | INTEGER | RO | |
column · INTEGER · read-only · current The role of the port. As per IEEE 802.1s, the port can have any of the following roles: Disabled, Root, Designated, Alternate, Backup, Master
| ||||
| Tdot1sStpVlanTable | 1.3.6.1.2.1.17.8.1.1.13 | NA | ||
table · not-accessible · current A table that contains MSTI-VLAN mapping. | ||||
| Rdot1sStpVlanEntry | 1.3.6.1.2.1.17.8.1.1.13.1 | NA | ||
row · not-accessible · current A list of information maintained by every MST instance about the VLANs mapped to that instance.
| ||||
| Cdot1sStpVlanIndex | 1.3.6.1.2.1.17.8.1.1.13.1.1 | Integer32 (1..4094) | NA | |
column · Integer32 (1..4094) · not-accessible · current This is the primary index to the MSTI-VLAN Table. It signifies the index to the VLAN range entry in the table. | ||||
| Cdot1sStpVlanInstId | 1.3.6.1.2.1.17.8.1.1.13.1.2 | Integer32 (0..15) | RW | |
column · Integer32 (0..15) · read-write · current The MST Instance value the VLAN mapped to. | ||||
| Ndot1sStpTrapTable | 1.3.6.1.2.1.17.8.1.1.14 | |||
| Ndot1sStpTrapEntry | 1.3.6.1.2.1.17.8.1.1.14.1 | |||
| !dot1sStpInstNewRoot | 1.3.6.1.2.1.17.8.1.1.14.1.1 | |||
| !dot1sStpInstPortForwarding | 1.3.6.1.2.1.17.8.1.1.14.1.2 | |||
Traps / Notifications
- dot1sStpInstNewRoot
1.3.6.1.2.1.17.8.1.1.14.1.1 - dot1sStpInstPortForwarding
1.3.6.1.2.1.17.8.1.1.14.1.2