MIB Browser

MEF-SOAM-TC-MIB

Metro Ethernet Forum
This MIB module defines the textual conventions used
throughout the Ethernet Services Operations, Administration
and Maintenance MIB modules.
Copyright 2010 Metro Ethernet Forum.
All rights reserved.
Organization
Metro Ethernet Forum
Root OID
1.3.6.1.4.1.15007.1.1
Last updated
Objects
1
Source
Show full MIB
snmptranslate -m MEF-SOAM-TC-MIB -Tp
snmpwalk -v2c -c <community> -m MEF-SOAM-TC-MIB <host> 1.3.6.1.4.1.15007.1.1

Imports

SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP
SNMPv2-SMIBits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, enterprises, iso
SNMPv2-TCDisplayString, PhysAddress, TEXTUAL-CONVENTION

OID tree

NameOIDTypeAccessStatus
ImefSoamTcMib1.3.6.1.4.1.15007.1.1

Textual conventions

MefSoamTcAvailabilityType INTEGER

available(1) unavailable(2) unknown(3)

This enumeration data type defines the availability of a session,
measured by a loss measurement session.

The valid enumerated values associated with this type are:

available(1)       indicates the MEP is available.

unavailable(2)     indicates the MEP is unavailable.

unknown(3)         indicates the availability is not known, for
                   instance because insufficient time has passed to
                   make an availability calculation, the time has been
                   excluded because of a maintenance interval, or because
                   availability measurement is not enabled.
MefSoamTcConnectivityStatusType INTEGER

active(2) inactive(1) partiallyActive(3)

This enumeration data type defines the connectivity status
of a Maintenance Entity (ME) or a Maintenance Entity Group (MEG).

The valid enumerated values associated with this type are:

inactive(1)        indicates an inactive connectivity state of a group
                   and refers to the inability to exchange SOAM PDU frame
                   among any of the entities in a group.

active(2)          indicates an active connectivity state of a group
                   and refers to the ability to exchange SOAM PDU frames
                   among all the entities in a group

partiallyActive(3) indicates a partially active connectivity state of a
                   group and refers to the ability to exchange SOAM PDU
                   frames among some entities of a group. This enumerated
                   value is only applicable for Multipoint-to-Multipoint
                   MEG.
MefSoamTcDataPatternType INTEGER

onesPattern(2) zeroPattern(1)

This enumeration data type indicates the type of data pattern to be
sent in an OAM PDU Data TLV.

The valid enumerated values associated with this type are:

zeroPattern(1)          indicates the Data TLV contains all zeros
onesPattern(2)          indicates the Data TLV contains all ones
MefSoamTcDelayMeasurementBinType INTEGER

backwardFrameDelay(3) backwardFrameDelayRange(9) backwardIfdv(6) forwardFrameDelay(2) forwardFrameDelayRange(8) forwardIfdv(5) twoWayFrameDelay(1) twoWayFrameDelayRange(7) twoWayIfdv(4)

This enumeration data type is used to distinguish between
measurement bins for Frame Delay, Frame Delay Range, and
Inter-frame Delay variation.

The valid enumerated values associated with this type are:

twoWayFrameDelay(1)        indicates a measurement bin for two-way
                           Frame Delay.
forwardFrameDelay(2)       indicates a measurement bin for one-way
                           Frame Delay in the forward direction.
backwardFrameDelay(3)      indicates a measurement bin for one-way
                           Frame Delay in the backward direction.
twoWayIfdv(4)              indicates a measurement bin for two-way
                           Inter-frame Delay Variation.
forwardIfdv(5)             indicates a measurement bin for one-way
                           Inter-frame Delay Variation in the forward
                           direction.
backwardIfdv(6)            indicates a measurement bin for one-way
                           Inter-frame Delay Variation in the backward
                           direction.
twoWayFrameDelayRange(7)   indicates a measurement bin for two-way
                           Frame Delay Range.
forwardFrameDelayRange(8)  indicates a measurement bin for one-way
                           Frame Delay Range in the forward direction.
backwardFrameDelayRange(9) indicates a measurement bin for one-way
                           Frame Delay Range in the backward direction.
MefSoamTcIntervalTypeAisLck INTEGER

oneMinute(2) oneSecond(1)

This enumeration data type defines the AIS/LCK transmission time
interval for an Alarm Indication Signal (AIS) or LCK frame.

The valid enumerated values associated with this type are:

oneSecond(1)  indicates a one second transmission interval.
oneMinute(2)  indicates a one minute transmission interval.
MefSoamTcMeasurementPeriodType Unsigned32 (3..3600000)

Display hint: d

Indicates the transmission time between the SOAM PM frames for a
PM session, in ms.
MefSoamTcMegIdType INTEGER

charString(2) iccBased(32) primaryVid(1) rfc2865VpnId(4) unsignedInt16(3)

This enumeration data type indicates the format of the MEG ID
that is sent in the OAM PDUs. Types 1-4 are more fully explained
in [CFM] 17.5. Type 32 is from [Y.1731] Annex A.

The valid enumerated values associated with this type are:

primaryVid(1)      Primary VLAN ID.
                   12 bits represented in a 2-octet integer:
                   - 4 least significant bits of the first
                       byte contains the 4 most significant
                       bits of the 12 bits primary VID
                   - second byte contains the 8 least
                     significant bits of the primary VID

                      0 1 2 3 4 5 6 7 8
                      +-+-+-+-+-+-+-+-+
                      |0 0 0 0| (MSB) |
                      +-+-+-+-+-+-+-+-+
                      |  VID   LSB    |
                      +-+-+-+-+-+-+-+-+

charString(2)      RFC2579 DisplayString, except that the
                   character codes 0-31 (decimal) are not
                   used. (1..45) octets

unsignedInt16 (3)  2-octet integer/big endian

rfc2865VpnId(4)    RFC 2685 VPN ID
                   3 octet VPN authority Organizationally
                   Unique Identifier followed by 4 octet VPN
                   index identifying VPN according to the OUI:

                       0 1 2 3 4 5 6 7 8
                       +-+-+-+-+-+-+-+-+
                       | VPN OUI (MSB) |
                       +-+-+-+-+-+-+-+-+
                       | VPN OUI |
                       +-+-+-+-+-+-+-+-+
                       | VPN OUI (LSB) |
                       +-+-+-+-+-+-+-+-+
                       |VPN Index (MSB)|
                       +-+-+-+-+-+-+-+-+
                       |  VPN  Index   |
                       +-+-+-+-+-+-+-+-+
                       |  VPN  Index   |
                       +-+-+-+-+-+-+-+-+
                       |VPN Index (LSB)|
                       +-+-+-+-+-+-+-+-+

iccBased (32)      ICC-based MEG ID Format, thirteen octet field
MefSoamTcOperationTimeType INTEGER

fixed(4) immediate(2) none(1) relative(3)

This enumeration data type indicates the operation type start
or end time to indicate when an OAM operation is
initiated or stopped.

The valid enumerated values associated with this type are:

none(1)       The operation is never started or is stopped immediately
              if used to indicate a start time, or the operation never
              ends if it is used to indicate an end time
immediate(2)  The operation is to begin immediately
relative(3)   The operation is to begin at a relative time from the
              current time or stop a relative time after it has started
fixed(4)      The operation is to begin/stop at the given UTC time/date
MefSoamTcSessionType INTEGER

onDemand(2) proactive(1)

This enumeration data type defines the status of PM session of a MEP.

The valid enumerated values associated with this type are:

proactive(1)     indicates the measurement instance is Proactive
onDemand(2)      indicates the measurement instance is On-demand
MefSoamTcStatusType INTEGER

active(1) notActive(2)

This enumeration data type defines the status of PM session of a MEP.

The valid enumerated values associated with this type are:

active(1)        indicates the measurement instance is active
notActive(2)     indicates the measurement instance is not active
MefSoamTcTestPatternType INTEGER

null(1) nullCrc32(2) prbs(3) prbsCrc32(4)

This enumeration data type indicates the type of test pattern to be
sent in an OAM PDU Test TLV.

The valid enumerated values associated with this type are:

null(1)       Null signal without CRC-32
nullCrc32(2)  Null signal with CRC-32
prbs(3)       PRBS 2^31-1 without CRC-32
prbsCrc32(4)  PRBS 2^31-1 with CRC-32

Used by