MIB Browser
Management Information Base module for LLDP configuration,
statistics, local system data and remote systems data
components.

Copyright (C) IEEE (2005).  This version of this MIB module
is published as subclause 12.1 of IEEE Std 802.1AB-2005;
see the standard itself for full legal notices.
Organization
IEEE 802.1 Working Group
Root OID
1.0.8802.1.1.2
Last updated
Objects
105
Source
Show full MIB
snmptranslate -m LLDP-MIB -Tp
snmpwalk -v2c -c <community> -m LLDP-MIB <host> 1.0.8802.1.1.2

Imports

IANA-ADDRESS-FAMILY-NUMBERS-MIBAddressFamilyNumbers
RMON2-MIBTimeFilter, ZeroBasedCounter32
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP
SNMPv2-SMIBits, Counter32, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, NOTIFICATION-TYPE, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso
SNMPv2-TCDisplayString, PhysAddress, TEXTUAL-CONVENTION, TimeStamp, TruthValue

OID tree

NameOIDTypeAccessStatusExample
IlldpMIB1.0.8802.1.1.2
NlldpNotifications1.0.8802.1.1.2.0
NlldpNotificationPrefix1.0.8802.1.1.2.0.0
!lldpRemTablesChange1.0.8802.1.1.2.0.0.1
NlldpObjects1.0.8802.1.1.2.1
NlldpConfiguration1.0.8802.1.1.2.1.1
SlldpMessageTxInterval1.0.8802.1.1.2.1.1.1Integer32 (5..32768)RW30
SlldpMessageTxHoldMultiplier1.0.8802.1.1.2.1.1.2Integer32 (2..10)RW4
SlldpReinitDelay1.0.8802.1.1.2.1.1.3Integer32 (1..10)RW1
SlldpTxDelay1.0.8802.1.1.2.1.1.4Integer32 (1..8192)RW1
SlldpNotificationInterval1.0.8802.1.1.2.1.1.5Integer32 (5..3600)RW5
TlldpPortConfigTable1.0.8802.1.1.2.1.1.6NA
RlldpPortConfigEntry1.0.8802.1.1.2.1.1.6.1NA
ClldpPortConfigPortNum1.0.8802.1.1.2.1.1.6.1.1LldpPortNumberNA
ClldpPortConfigAdminStatus1.0.8802.1.1.2.1.1.6.1.2INTEGERRWtxAndRx(3)
ClldpPortConfigNotificationEnable1.0.8802.1.1.2.1.1.6.1.3TruthValueRW2
ClldpPortConfigTLVsTxEnable1.0.8802.1.1.2.1.1.6.1.4BitsRWf0
TlldpConfigManAddrTable1.0.8802.1.1.2.1.1.7NA
RlldpConfigManAddrEntry1.0.8802.1.1.2.1.1.7.1NA
ClldpConfigManAddrPortsTxEnable1.0.8802.1.1.2.1.1.7.1.1LldpPortListRWff:fe
NlldpStatistics1.0.8802.1.1.2.1.2
SlldpStatsRemTablesLastChangeTime1.0.8802.1.1.2.1.2.1TimeStampRO2400 (0d 0h 0m 24s)
SlldpStatsRemTablesInserts1.0.8802.1.1.2.1.2.2ZeroBasedCounter32RO6
SlldpStatsRemTablesDeletes1.0.8802.1.1.2.1.2.3ZeroBasedCounter32RO0
SlldpStatsRemTablesDrops1.0.8802.1.1.2.1.2.4ZeroBasedCounter32RO0
SlldpStatsRemTablesAgeouts1.0.8802.1.1.2.1.2.5ZeroBasedCounter32RO0
TlldpStatsTxPortTable1.0.8802.1.1.2.1.2.6NA
RlldpStatsTxPortEntry1.0.8802.1.1.2.1.2.6.1NA
ClldpStatsTxPortNum1.0.8802.1.1.2.1.2.6.1.1LldpPortNumberNA
ClldpStatsTxPortFramesTotal1.0.8802.1.1.2.1.2.6.1.2Counter32RO6
TlldpStatsRxPortTable1.0.8802.1.1.2.1.2.7NA
RlldpStatsRxPortEntry1.0.8802.1.1.2.1.2.7.1NA
ClldpStatsRxPortNum1.0.8802.1.1.2.1.2.7.1.1LldpPortNumberNA
ClldpStatsRxPortFramesDiscardedTotal1.0.8802.1.1.2.1.2.7.1.2Counter32RO0
ClldpStatsRxPortFramesErrors1.0.8802.1.1.2.1.2.7.1.3Counter32RO0
ClldpStatsRxPortFramesTotal1.0.8802.1.1.2.1.2.7.1.4Counter32RO2
ClldpStatsRxPortTLVsDiscardedTotal1.0.8802.1.1.2.1.2.7.1.5Counter32RO0
ClldpStatsRxPortTLVsUnrecognizedTotal1.0.8802.1.1.2.1.2.7.1.6Counter32RO0
ClldpStatsRxPortAgeoutsTotal1.0.8802.1.1.2.1.2.7.1.7ZeroBasedCounter32RO0
NlldpLocalSystemData1.0.8802.1.1.2.1.3
SlldpLocChassisIdSubtype1.0.8802.1.1.2.1.3.1LldpChassisIdSubtypeRO4
SlldpLocChassisId1.0.8802.1.1.2.1.3.2LldpChassisIdRO48:b0:2d:00:00:00
SlldpLocSysName1.0.8802.1.1.2.1.3.3SnmpAdminString (SIZE (0..255))ROleaf01
SlldpLocSysDesc1.0.8802.1.1.2.1.3.4SnmpAdminString (SIZE (0..255))ROCumulus Linux version 5.18.3 running on QEMU St…
SlldpLocSysCapSupported1.0.8802.1.1.2.1.3.5LldpSystemCapabilitiesMapRO(
SlldpLocSysCapEnabled1.0.8802.1.1.2.1.3.6LldpSystemCapabilitiesMapRO08
TlldpLocPortTable1.0.8802.1.1.2.1.3.7NA
RlldpLocPortEntry1.0.8802.1.1.2.1.3.7.1NA
ClldpLocPortNum1.0.8802.1.1.2.1.3.7.1.1LldpPortNumberNA
ClldpLocPortIdSubtype1.0.8802.1.1.2.1.3.7.1.2LldpPortIdSubtypeRO7
ClldpLocPortId1.0.8802.1.1.2.1.3.7.1.3LldpPortIdROgi1
ClldpLocPortDesc1.0.8802.1.1.2.1.3.7.1.4SnmpAdminString (SIZE (0..255))ROAlcatel-Lucent 1/1
TlldpLocManAddrTable1.0.8802.1.1.2.1.3.8NA
RlldpLocManAddrEntry1.0.8802.1.1.2.1.3.8.1NA
ClldpLocManAddrSubtype1.0.8802.1.1.2.1.3.8.1.1AddressFamilyNumbersNA
ClldpLocManAddr1.0.8802.1.1.2.1.3.8.1.2LldpManAddressNA
ClldpLocManAddrLen1.0.8802.1.1.2.1.3.8.1.3Integer32RO5
ClldpLocManAddrIfSubtype1.0.8802.1.1.2.1.3.8.1.4LldpManAddrIfSubtypeRO2
ClldpLocManAddrIfId1.0.8802.1.1.2.1.3.8.1.5Integer32RO1
ClldpLocManAddrOID1.0.8802.1.1.2.1.3.8.1.6OBJECT IDENTIFIERRO0.0
NlldpRemoteSystemsData1.0.8802.1.1.2.1.4
TlldpRemTable1.0.8802.1.1.2.1.4.1NA
RlldpRemEntry1.0.8802.1.1.2.1.4.1.1NA
ClldpRemTimeMark1.0.8802.1.1.2.1.4.1.1.1TimeFilterNA138 (0d 0h 0m 1s)
ClldpRemLocalPortNum1.0.8802.1.1.2.1.4.1.1.2LldpPortNumberNA1
ClldpRemIndex1.0.8802.1.1.2.1.4.1.1.3Integer32 (1..2147483647)NA1
ClldpRemChassisIdSubtype1.0.8802.1.1.2.1.4.1.1.4LldpChassisIdSubtypeRO4
ClldpRemChassisId1.0.8802.1.1.2.1.4.1.1.5LldpChassisIdRO00:80:9f:85:78:8e
ClldpRemPortIdSubtype1.0.8802.1.1.2.1.4.1.1.6LldpPortIdSubtypeRO3
ClldpRemPortId1.0.8802.1.1.2.1.4.1.1.7LldpPortIdRO00:80:9f:85:78:8e
ClldpRemPortDesc1.0.8802.1.1.2.1.4.1.1.8SnmpAdminString (SIZE (0..255))RO
ClldpRemSysName1.0.8802.1.1.2.1.4.1.1.9SnmpAdminString (SIZE (0..255))RO
ClldpRemSysDesc1.0.8802.1.1.2.1.4.1.1.10SnmpAdminString (SIZE (0..255))RO
ClldpRemSysCapSupported1.0.8802.1.1.2.1.4.1.1.11LldpSystemCapabilitiesMapRO04 5
ClldpRemSysCapEnabled1.0.8802.1.1.2.1.4.1.1.12LldpSystemCapabilitiesMapRO04 5
TlldpRemManAddrTable1.0.8802.1.1.2.1.4.2NA
RlldpRemManAddrEntry1.0.8802.1.1.2.1.4.2.1NA
ClldpRemManAddrSubtype1.0.8802.1.1.2.1.4.2.1.1AddressFamilyNumbersNA1
ClldpRemManAddr1.0.8802.1.1.2.1.4.2.1.2LldpManAddressNA169.254.9.11
ClldpRemManAddrIfSubtype1.0.8802.1.1.2.1.4.2.1.3LldpManAddrIfSubtypeRO2
ClldpRemManAddrIfId1.0.8802.1.1.2.1.4.2.1.4Integer32RO1
ClldpRemManAddrOID1.0.8802.1.1.2.1.4.2.1.5OBJECT IDENTIFIERRO0.0
TlldpRemUnknownTLVTable1.0.8802.1.1.2.1.4.3NA
RlldpRemUnknownTLVEntry1.0.8802.1.1.2.1.4.3.1NA
ClldpRemUnknownTLVType1.0.8802.1.1.2.1.4.3.1.1Integer32 (9..126)NA
ClldpRemUnknownTLVInfo1.0.8802.1.1.2.1.4.3.1.2OCTET STRING (SIZE (0..511))RO
TlldpRemOrgDefInfoTable1.0.8802.1.1.2.1.4.4NA
RlldpRemOrgDefInfoEntry1.0.8802.1.1.2.1.4.4.1NA
ClldpRemOrgDefInfoOUI1.0.8802.1.1.2.1.4.4.1.1OCTET STRING (SIZE (3))NA
ClldpRemOrgDefInfoSubtype1.0.8802.1.1.2.1.4.4.1.2Integer32 (1..255)NA
ClldpRemOrgDefInfoIndex1.0.8802.1.1.2.1.4.4.1.3Integer32 (1..2147483647)NA
ClldpRemOrgDefInfo1.0.8802.1.1.2.1.4.4.1.4OCTET STRING (SIZE (0..507))RO
NlldpExtensions1.0.8802.1.1.2.1.5
NlldpConformance1.0.8802.1.1.2.2
NlldpCompliances1.0.8802.1.1.2.2.1
MlldpCompliance1.0.8802.1.1.2.2.1.1
NlldpGroups1.0.8802.1.1.2.2.2
GlldpConfigGroup1.0.8802.1.1.2.2.2.1
GlldpConfigRxGroup1.0.8802.1.1.2.2.2.2
GlldpConfigTxGroup1.0.8802.1.1.2.2.2.3
GlldpStatsRxGroup1.0.8802.1.1.2.2.2.4
GlldpStatsTxGroup1.0.8802.1.1.2.2.2.5
GlldpLocSysGroup1.0.8802.1.1.2.2.2.6
GlldpRemSysGroup1.0.8802.1.1.2.2.2.7
GlldpNotificationsGroup1.0.8802.1.1.2.2.2.8

Textual conventions

LldpChassisId OCTET STRING (SIZE (1..255))
This TC describes the format of a chassis identifier string.
Objects of this type are always used with an associated
LldpChassisIdSubtype object, which identifies the format of
the particular LldpChassisId object instance.

If the associated LldpChassisIdSubtype object has a value of
'chassisComponent(1)', then the octet string identifies
a particular instance of the entPhysicalAlias object
(defined in IETF RFC 2737) for a chassis component (i.e.,
an entPhysicalClass value of 'chassis(3)').

If the associated LldpChassisIdSubtype object has a value
of 'interfaceAlias(2)', then the octet string identifies
a particular instance of the ifAlias object (defined in
IETF RFC 2863) for an interface on the containing chassis.
If the particular ifAlias object does not contain any values,
another chassis identifier type should be used.

If the associated LldpChassisIdSubtype object has a value
of 'portComponent(3)', then the octet string identifies a
particular instance of the entPhysicalAlias object (defined
in IETF RFC 2737) for a port or backplane component within
the containing chassis.

If the associated LldpChassisIdSubtype object has a value of
'macAddress(4)', then this string identifies a particular
unicast source address (encoded in network byte order and
IEEE 802.3 canonical bit order), of a port on the containing
chassis as defined in IEEE Std 802-2001.

If the associated LldpChassisIdSubtype object has a value of
'networkAddress(5)', then this string identifies a particular
network address, encoded in network byte order, associated
with one or more ports on the containing chassis.  The first
octet contains the IANA Address Family Numbers enumeration
value for the specific address type, and octets 2 through
N contain the network address value in network byte order.

If the associated LldpChassisIdSubtype object has a value
of 'interfaceName(6)', then the octet string identifies
a particular instance of the ifName object (defined in
IETF RFC 2863) for an interface on the containing chassis.
If the particular ifName object does not contain any values,
another chassis identifier type should be used.

If the associated LldpChassisIdSubtype object has a value of
'local(7)', then this string identifies a locally assigned
Chassis ID.
LldpChassisIdSubtype INTEGER

chassisComponent(1) interfaceAlias(2) interfaceName(6) local(7) macAddress(4) networkAddress(5) portComponent(3)

This TC describes the source of a chassis identifier.

The enumeration 'chassisComponent(1)' represents a chassis
identifier based on the value of entPhysicalAlias object
(defined in IETF RFC 2737) for a chassis component (i.e.,
an entPhysicalClass value of 'chassis(3)').

The enumeration 'interfaceAlias(2)' represents a chassis
identifier based on the value of ifAlias object (defined in
IETF RFC 2863) for an interface on the containing chassis.

The enumeration 'portComponent(3)' represents a chassis
identifier based on the value of entPhysicalAlias object
(defined in IETF RFC 2737) for a port or backplane
component (i.e., entPhysicalClass value of 'port(10)' or
'backplane(4)'), within the containing chassis.

The enumeration 'macAddress(4)' represents a chassis
identifier based on the value of a unicast source address
(encoded in network byte order and IEEE 802.3 canonical bit
order), of a port on the containing chassis as defined in
IEEE Std 802-2001.

The enumeration 'networkAddress(5)' represents a chassis
identifier based on a network address, associated with
a particular chassis.  The encoded address is actually
composed of two fields.  The first field is a single octet,
representing the IANA AddressFamilyNumbers value for the
specific address type, and the second field is the network
address value.

The enumeration 'interfaceName(6)' represents a chassis
identifier based on the value of ifName object (defined in
IETF RFC 2863) for an interface on the containing chassis.

The enumeration 'local(7)' represents a chassis identifier
based on a locally defined value.
LldpManAddrIfSubtype INTEGER

ifIndex(2) systemPortNumber(3) unknown(1)

This TC describes the basis of a particular type of
interface associated with the management address.

The enumeration 'unknown(1)' represents the case where the
interface is not known.

The enumeration 'ifIndex(2)' represents interface identifier
based on the ifIndex MIB object.

The enumeration 'systemPortNumber(3)' represents interface
identifier based on the system port numbering convention.
LldpManAddress OCTET STRING (SIZE (1..31))
The value of a management address associated with the LLDP
agent that may be used to reach higher layer entities to
assist discovery by network management.

It should be noted that appropriate security credentials,
such as SNMP engineId, may be required to access the LLDP
agent using a management address.  These necessary credentials
should be known by the network management and the objects
associated with the credentials are not included in the
LLDP agent.
LldpPortId OCTET STRING (SIZE (1..255))
This TC describes the format of a port identifier string.
Objects of this type are always used with an associated
LldpPortIdSubtype object, which identifies the format of the
particular LldpPortId object instance.

If the associated LldpPortIdSubtype object has a value of
'interfaceAlias(1)', then the octet string identifies a
particular instance of the ifAlias object (defined in IETF
RFC 2863).  If the particular ifAlias object does not contain
any values, another port identifier type should be used.

If the associated LldpPortIdSubtype object has a value of
'portComponent(2)', then the octet string identifies a
particular instance of the entPhysicalAlias object (defined
in IETF RFC 2737) for a port or backplane component.

If the associated LldpPortIdSubtype object has a value of
'macAddress(3)', then this string identifies a particular
unicast source address (encoded in network byte order
and IEEE 802.3 canonical bit order) associated with the port
(IEEE Std 802-2001).

If the associated LldpPortIdSubtype object has a value of
'networkAddress(4)', then this string identifies a network
address associated with the port.  The first octet contains
the IANA AddressFamilyNumbers enumeration value for the
specific address type, and octets 2 through N contain the
networkAddress address value in network byte order.

If the associated LldpPortIdSubtype object has a value of
'interfaceName(5)', then the octet string identifies a
particular instance of the ifName object (defined in IETF
RFC 2863).  If the particular ifName object does not contain
any values, another port identifier type should be used.

If the associated LldpPortIdSubtype object has a value of
'agentCircuitId(6)', then this string identifies a agent-local
identifier of the circuit (defined in RFC 3046).

If the associated LldpPortIdSubtype object has a value of
'local(7)', then this string identifies a locally
assigned port ID.
LldpPortIdSubtype INTEGER

agentCircuitId(6) interfaceAlias(1) interfaceName(5) local(7) macAddress(3) networkAddress(4) portComponent(2)

This TC describes the source of a particular type of port
identifier used in the LLDP MIB.

The enumeration 'interfaceAlias(1)' represents a port
identifier based on the ifAlias MIB object, defined in IETF
RFC 2863.

The enumeration 'portComponent(2)' represents a port
identifier based on the value of entPhysicalAlias (defined in
IETF RFC 2737) for a port component (i.e., entPhysicalClass
value of 'port(10)'), within the containing chassis.

The enumeration 'macAddress(3)' represents a port identifier
based on a unicast source address (encoded in network
byte order and IEEE 802.3 canonical bit order), which has
been detected by the agent and associated with a particular
port (IEEE Std 802-2001).

The enumeration 'networkAddress(4)' represents a port
identifier based on a network address, detected by the agent
and associated with a particular port.

The enumeration 'interfaceName(5)' represents a port
identifier based on the ifName MIB object, defined in IETF
RFC 2863.

The enumeration 'agentCircuitId(6)' represents a port
identifier based on the agent-local identifier of the circuit
(defined in RFC 3046), detected by the agent and associated
with a particular port.

The enumeration 'local(7)' represents a port identifier
based on a value locally assigned.
LldpPortList OCTET STRING (SIZE (0..512))
Each octet within this value specifies a set of eight ports,
with the first octet specifying ports 1 through 8, the second
octet specifying ports 9 through 16, etc.  Within each octet,
the most significant bit represents the lowest numbered port,
and the least significant bit represents the highest numbered
port.  Thus, each port of the system is represented by a
single bit within the value of this object.  If that bit has
a value of '1' then that port is included in the set of ports;
the port is not included if its bit has a value of '0'.
LldpPortNumber Integer32 (1..4096)
Each port contained in the chassis (that is known to the
LLDP agent) is uniquely identified by a port number.

A port number has no mandatory relationship to an
InterfaceIndex object (of the interfaces MIB, IETF RFC 2863).
If the LLDP agent is a IEEE 802.1D, IEEE 802.1Q bridge, the
LldpPortNumber will have the same value as the dot1dBasePort
object (defined in IETF RFC 1493) associated corresponding
bridge port.  If the system hosting LLDP agent is not an
IEEE 802.1D or an IEEE 802.1Q bridge, the LldpPortNumber
will have the same value as the corresponding interface's
InterfaceIndex object.

Port numbers should be in the range of 1 and 4096 since a
particular port is also represented by the corresponding
port number bit in LldpPortList.
LldpSystemCapabilitiesMap Bits

bridge(2) docsisCableDevice(6) other(0) repeater(1) router(4) stationOnly(7) telephone(5) wlanAccessPoint(3)

This TC describes the system capabilities.

The bit 'other(0)' indicates that the system has capabilities
other than those listed below.

The bit 'repeater(1)' indicates that the system has repeater
capability.

The bit 'bridge(2)' indicates that the system has bridge
capability.

The bit 'wlanAccessPoint(3)' indicates that the system has
WLAN access point capability.

The bit 'router(4)' indicates that the system has router
capability.

The bit 'telephone(5)' indicates that the system has telephone
capability.

The bit 'docsisCableDevice(6)' indicates that the system has
DOCSIS Cable Device capability (IETF RFC 2669 & 2670).

The bit 'stationOnly(7)' indicates that the system has only
station capability and nothing else.

Used by