LLDP-EXT-DOT3-MIB
Standards (IEEE)The LLDP Management Information Base extension module for IEEE 802.3 organizationally defined discovery information. In order to assure the uniqueness of the LLDP-MIB, lldpXdot3MIB is branched from lldpExtensions using OUI value as the node. An OUI/'company_id' is a 24 bit globally unique assigned number referenced by various standards. Copyright (C) IEEE (2005). This version of this MIB module is published as Annex G.6.1 of IEEE Std 802.1AB-2005; see the standard itself for full legal notices.
snmptranslate -m LLDP-EXT-DOT3-MIB -Tpsnmpwalk -v2c -c <community> -m LLDP-EXT-DOT3-MIB <host> 1.0.8802.1.1.2.1.5.4623Imports
| LLDP-MIB | lldpExtensions, lldpLocPortNum, lldpPortConfigEntry, lldpRemIndex, lldpRemLocalPortNum, lldpRemTimeMark |
|---|---|
| SNMPv2-CONF | MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP |
| SNMPv2-SMI | Bits, Integer32, IpAddress, MODULE-IDENTITY, MibIdentifier, OBJECT-IDENTITY, OBJECT-TYPE, TimeTicks, Unsigned32, iso |
| SNMPv2-TC | DisplayString, PhysAddress, TEXTUAL-CONVENTION, TruthValue |
OID tree
| Name | OID | Type | Access | Status | Example | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| IlldpXdot3MIB | 1.0.8802.1.1.2.1.5.4623 | ||||||||||||||||||||
identity The LLDP Management Information Base extension module for IEEE 802.3 organizationally defined discovery information. In order to assure the uniqueness of the LLDP-MIB, lldpXdot3MIB is branched from lldpExtensions using OUI value as the node. An OUI/'company_id' is a 24 bit globally unique assigned number referenced by various standards. Copyright (C) IEEE (2005). This version of this MIB module is published as Annex G.6.1 of IEEE Std 802.1AB-2005; see the standard itself for full legal notices. | |||||||||||||||||||||
| NlldpXdot3Objects | 1.0.8802.1.1.2.1.5.4623.1 | ||||||||||||||||||||
| NlldpXdot3Config | 1.0.8802.1.1.2.1.5.4623.1.1 | ||||||||||||||||||||
| TlldpXdot3PortConfigTable | 1.0.8802.1.1.2.1.5.4623.1.1.1 | NA | |||||||||||||||||||
table · not-accessible · current A table that controls selection of LLDP TLVs to be transmitted on individual ports. | |||||||||||||||||||||
| RlldpXdot3PortConfigEntry | 1.0.8802.1.1.2.1.5.4623.1.1.1.1 | NA | |||||||||||||||||||
row · not-accessible · current LLDP configuration information that controls the transmission of IEEE 802.3 organizationally defined TLVs on LLDP transmission capable ports. This configuration object augments the lldpPortConfigEntry of the LLDP-MIB, therefore it is only present along with the port configuration defined by the associated lldpPortConfigEntry entry. Each active lldpXdot3PortConfigEntry must be from non-volatile storage (along with the corresponding lldpPortConfigEntry) after a re-initialization of the management system.
| |||||||||||||||||||||
| ClldpXdot3PortConfigTLVsTxEnable | 1.0.8802.1.1.2.1.5.4623.1.1.1.1.1 | Bits | RW | 00 | |||||||||||||||||
column · Bits · read-write · current The lldpXdot3PortConfigTLVsTxEnable, defined as a bitmap, includes the IEEE 802.3 organizationally defined set of LLDP TLVs whose transmission is allowed on the local LLDP agent by the network management. Each bit in the bitmap corresponds to an IEEE 802.3 subtype associated with a specific IEEE 802.3 optional TLV. The bit 0 is not used since there is no corresponding subtype. The bit 'macPhyConfigStatus(0)' indicates that LLDP agent should transmit 'MAC/PHY configuration/status TLV'. The bit 'powerViaMDI(1)' indicates that LLDP agent should transmit 'Power via MDI TLV'. The bit 'linkAggregation(2)' indicates that LLDP agent should transmit 'Link Aggregation TLV'. The bit 'maxFrameSize(3)' indicates that LLDP agent should transmit 'Maximum-frame-size TLV'. The default value for lldpXdot3PortConfigTLVsTxEnable object is an empty set, which means no enumerated values are set. The value of this object must be restored from non-volatile storage after a re-initialization of the management system.
Example values from LibreNMS test devices
| |||||||||||||||||||||
| NlldpXdot3LocalData | 1.0.8802.1.1.2.1.5.4623.1.2 | ||||||||||||||||||||
| TlldpXdot3LocPortTable | 1.0.8802.1.1.2.1.5.4623.1.2.1 | NA | |||||||||||||||||||
table · not-accessible · current This table contains one row per port of Ethernet port information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agent. | |||||||||||||||||||||
| RlldpXdot3LocPortEntry | 1.0.8802.1.1.2.1.5.4623.1.2.1.1 | NA | |||||||||||||||||||
| ClldpXdot3LocPortAutoNegSupported | 1.0.8802.1.1.2.1.5.4623.1.2.1.1.1 | TruthValue | RO | 2 | |||||||||||||||||
column · TruthValue · read-only · current The truth value used to indicate whether the given port (associated with the local system) supports Auto-negotiation. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClldpXdot3LocPortAutoNegEnabled | 1.0.8802.1.1.2.1.5.4623.1.2.1.1.2 | TruthValue | RO | 2 | |||||||||||||||||
column · TruthValue · read-only · current The truth value used to indicate whether port Auto-negotiation is enabled on the given port associated with the local system. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClldpXdot3LocPortAutoNegAdvertisedCap | 1.0.8802.1.1.2.1.5.4623.1.2.1.1.3 | OCTET STRING (SIZE (2)) | RO | 00:00 | |||||||||||||||||
column · OCTET STRING (SIZE (2)) · read-only · current This object contains the value (bitmap) of the ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636) which is associated with the given port on the local system. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClldpXdot3LocPortOperMauType | 1.0.8802.1.1.2.1.5.4623.1.2.1.1.4 | Integer32 (0..2147483647) | RO | 30 | |||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current An integer value that indicates the operational MAU type
of the given port on the local system.
This object contains the integer value derived from the
list position of the corresponding dot3MauType as listed
in IETF RFC 3636 (or subsequent revisions) and is equal
to the last number in the respective dot3MauType OID.
For example, if the ifMauType object is dot3MauType1000BaseTHD
which corresponds to {dot3MauType 29}, the numerical value of
this field will be 29. For MAU types not listed in RFC 3636
(or subsequent revisions), the value of this field shall be
set to zero.Example values from LibreNMS test devices
| |||||||||||||||||||||
| TlldpXdot3LocPowerTable | 1.0.8802.1.1.2.1.5.4623.1.2.2 | NA | |||||||||||||||||||
table · not-accessible · current This table contains one row per port of power ethernet information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agent. | |||||||||||||||||||||
| RlldpXdot3LocPowerEntry | 1.0.8802.1.1.2.1.5.4623.1.2.2.1 | NA | |||||||||||||||||||
| ClldpXdot3LocPowerPortClass | 1.0.8802.1.1.2.1.5.4623.1.2.2.1.1 | LldpPowerPortClass | RO | ||||||||||||||||||
column · LldpPowerPortClass · read-only · current The value that identifies the port Class of the given port associated with the local system. | |||||||||||||||||||||
| ClldpXdot3LocPowerMDISupported | 1.0.8802.1.1.2.1.5.4623.1.2.2.1.2 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current The truth value used to indicate whether the MDI power is supported on the given port associated with the local system. | |||||||||||||||||||||
| ClldpXdot3LocPowerMDIEnabled | 1.0.8802.1.1.2.1.5.4623.1.2.2.1.3 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current The truth value used to identify whether MDI power is enabled on the given port associated with the local system. | |||||||||||||||||||||
| ClldpXdot3LocPowerPairControlable | 1.0.8802.1.1.2.1.5.4623.1.2.2.1.4 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current The truth value is derived from the value of pethPsePortPowerPairsControlAbility object (defined in IETF RFC 3621) and is used to indicate whether the pair selection can be controlled on the given port associated with the local system. | |||||||||||||||||||||
| ClldpXdot3LocPowerPairs | 1.0.8802.1.1.2.1.5.4623.1.2.2.1.5 | Integer32 (1 | 2) | RO | ||||||||||||||||||
column · Integer32 (1 | 2) · read-only · current This object contains the value of the pethPsePortPowerPairs object (defined in IETF RFC 3621) which is associated with the given port on the local system. | |||||||||||||||||||||
| ClldpXdot3LocPowerClass | 1.0.8802.1.1.2.1.5.4623.1.2.2.1.6 | Integer32 (1 | 2 | 3 | 4 | 5) | RO | ||||||||||||||||||
column · Integer32 (1 | 2 | 3 | 4 | 5) · read-only · current This object contains the value of the pethPsePortPowerClassifications object (defined in IETF RFC 3621) which is associated with the given port on the local system. | |||||||||||||||||||||
| TlldpXdot3LocLinkAggTable | 1.0.8802.1.1.2.1.5.4623.1.2.3 | NA | |||||||||||||||||||
table · not-accessible · current This table contains one row per port of link aggregation information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agent. | |||||||||||||||||||||
| RlldpXdot3LocLinkAggEntry | 1.0.8802.1.1.2.1.5.4623.1.2.3.1 | NA | |||||||||||||||||||
row · not-accessible · current Link Aggregation information about a particular port component.
| |||||||||||||||||||||
| ClldpXdot3LocLinkAggStatus | 1.0.8802.1.1.2.1.5.4623.1.2.3.1.1 | LldpLinkAggStatusMap | RO | 00 | |||||||||||||||||
column · LldpLinkAggStatusMap · read-only · current The bitmap value contains the link aggregation capabilities and the current aggregation status of the link. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClldpXdot3LocLinkAggPortId | 1.0.8802.1.1.2.1.5.4623.1.2.3.1.2 | Integer32 (0 | 1..2147483647) | RO | 0 | |||||||||||||||||
column · Integer32 (0 | 1..2147483647) · read-only · current This object contains the IEEE 802.3 aggregated port identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1), derived from the ifNumber of the ifIndex for the port component in link aggregation. If the port is not in link aggregation state and/or it does not support link aggregation, this value should be set to zero. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TlldpXdot3LocMaxFrameSizeTable | 1.0.8802.1.1.2.1.5.4623.1.2.4 | NA | |||||||||||||||||||
table · not-accessible · current This table contains one row per port of maximum frame size information (as a part of the LLDP 802.3 organizational extension) on the local system known to this agent. | |||||||||||||||||||||
| RlldpXdot3LocMaxFrameSizeEntry | 1.0.8802.1.1.2.1.5.4623.1.2.4.1 | NA | |||||||||||||||||||
row · not-accessible · current Maximum Frame Size information about a particular port component.
| |||||||||||||||||||||
| ClldpXdot3LocMaxFrameSize | 1.0.8802.1.1.2.1.5.4623.1.2.4.1.1 | Integer32 (0..65535) | RO | 1500 | |||||||||||||||||
column · Integer32 (0..65535) · read-only · current An integer value indicating the maximum supported frame size in octets on the given port of the local system. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NlldpXdot3RemoteData | 1.0.8802.1.1.2.1.5.4623.1.3 | ||||||||||||||||||||
| TlldpXdot3RemPortTable | 1.0.8802.1.1.2.1.5.4623.1.3.1 | NA | |||||||||||||||||||
table · not-accessible · current This table contains Ethernet port information (as a part of the LLDP 802.3 organizational extension) of the remote system. | |||||||||||||||||||||
| RlldpXdot3RemPortEntry | 1.0.8802.1.1.2.1.5.4623.1.3.1.1 | NA | |||||||||||||||||||
row · not-accessible · current Information about a particular physical network connection. | |||||||||||||||||||||
| ClldpXdot3RemPortAutoNegSupported | 1.0.8802.1.1.2.1.5.4623.1.3.1.1.1 | TruthValue | RO | 2 | |||||||||||||||||
column · TruthValue · read-only · current The truth value used to indicate whether the given port (associated with remote system) supports Auto-negotiation. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClldpXdot3RemPortAutoNegEnabled | 1.0.8802.1.1.2.1.5.4623.1.3.1.1.2 | TruthValue | RO | 2 | |||||||||||||||||
column · TruthValue · read-only · current The truth value used to indicate whether port Auto-negotiation is enabled on the given port associated with the remote system. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClldpXdot3RemPortAutoNegAdvertisedCap | 1.0.8802.1.1.2.1.5.4623.1.3.1.1.3 | OCTET STRING (SIZE (2)) | RO | 00:00 | |||||||||||||||||
column · OCTET STRING (SIZE (2)) · read-only · current This object contains the value (bitmap) of the ifMauAutoNegCapAdvertisedBits object (defined in IETF RFC 3636) which is associated with the given port on the remote system. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClldpXdot3RemPortOperMauType | 1.0.8802.1.1.2.1.5.4623.1.3.1.1.4 | Integer32 (0..2147483647) | RO | 30 | |||||||||||||||||
column · Integer32 (0..2147483647) · read-only · current An integer value that indicates the operational MAU type
of the sending device.
This object contains the integer value derived from the
list position of the corresponding dot3MauType as listed in
in IETF RFC 3636 (or subsequent revisions) and is equal
to the last number in the respective dot3MauType OID.
For example, if the ifMauType object is dot3MauType1000BaseTHD
which corresponds to {dot3MauType 29}, the numerical value of
this field will be 29. For MAU types not listed in RFC 3636
(or subsequent revisions), the value of this field shall be
set to zero.Example values from LibreNMS test devices
| |||||||||||||||||||||
| TlldpXdot3RemPowerTable | 1.0.8802.1.1.2.1.5.4623.1.3.2 | NA | |||||||||||||||||||
table · not-accessible · current This table contains Ethernet power information (as a part of the LLDP 802.3 organizational extension) of the remote system. | |||||||||||||||||||||
| RlldpXdot3RemPowerEntry | 1.0.8802.1.1.2.1.5.4623.1.3.2.1 | NA | |||||||||||||||||||
row · not-accessible · current Information about a particular physical network connection. | |||||||||||||||||||||
| ClldpXdot3RemPowerPortClass | 1.0.8802.1.1.2.1.5.4623.1.3.2.1.1 | LldpPowerPortClass | RO | ||||||||||||||||||
column · LldpPowerPortClass · read-only · current The value that identifies the port Class of the given port associated with the remote system. | |||||||||||||||||||||
| ClldpXdot3RemPowerMDISupported | 1.0.8802.1.1.2.1.5.4623.1.3.2.1.2 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current The truth value used to indicate whether the MDI power is supported on the given port associated with the remote system. | |||||||||||||||||||||
| ClldpXdot3RemPowerMDIEnabled | 1.0.8802.1.1.2.1.5.4623.1.3.2.1.3 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current The truth value used to identify whether MDI power is enabled on the given port associated with the remote system. | |||||||||||||||||||||
| ClldpXdot3RemPowerPairControlable | 1.0.8802.1.1.2.1.5.4623.1.3.2.1.4 | TruthValue | RO | ||||||||||||||||||
column · TruthValue · read-only · current The truth value is derived from the value of pethPsePortPowerPairsControlAbility object (defined in IETF RFC 3621) and is used to indicate whether the pair selection can be controlled on the given port associated with the remote system. | |||||||||||||||||||||
| ClldpXdot3RemPowerPairs | 1.0.8802.1.1.2.1.5.4623.1.3.2.1.5 | Integer32 (1 | 2) | RO | ||||||||||||||||||
column · Integer32 (1 | 2) · read-only · current This object contains the value of the pethPsePortPowerPairs object (defined in IETF RFC 3621) which is associated with the given port on the remote system. | |||||||||||||||||||||
| ClldpXdot3RemPowerClass | 1.0.8802.1.1.2.1.5.4623.1.3.2.1.6 | Integer32 (1 | 2 | 3 | 4 | 5) | RO | ||||||||||||||||||
column · Integer32 (1 | 2 | 3 | 4 | 5) · read-only · current This object contains the value of the pethPsePortPowerClassifications object (defined in IETF RFC 3621) which is associated with the given port on the remote system. | |||||||||||||||||||||
| TlldpXdot3RemLinkAggTable | 1.0.8802.1.1.2.1.5.4623.1.3.3 | NA | |||||||||||||||||||
table · not-accessible · current This table contains port link aggregation information (as a part of the LLDP 802.3 organizational extension) of the remote system. | |||||||||||||||||||||
| RlldpXdot3RemLinkAggEntry | 1.0.8802.1.1.2.1.5.4623.1.3.3.1 | NA | |||||||||||||||||||
row · not-accessible · current Link Aggregation information about remote system's port component. | |||||||||||||||||||||
| ClldpXdot3RemLinkAggStatus | 1.0.8802.1.1.2.1.5.4623.1.3.3.1.1 | LldpLinkAggStatusMap | RO | 00 | |||||||||||||||||
column · LldpLinkAggStatusMap · read-only · current The bitmap value contains the link aggregation capabilities and the current aggregation status of the link. Example values from LibreNMS test devices
| |||||||||||||||||||||
| ClldpXdot3RemLinkAggPortId | 1.0.8802.1.1.2.1.5.4623.1.3.3.1.2 | Integer32 (0 | 1..2147483647) | RO | 0 | |||||||||||||||||
column · Integer32 (0 | 1..2147483647) · read-only · current This object contains the IEEE 802.3 aggregated port identifier, aAggPortID (IEEE 802.3-2002, 30.7.2.1.1), derived from the ifNumber of the ifIndex for the port component associated with the remote system. If the remote port is not in link aggregation state and/or it does not support link aggregation, this value should be zero. Example values from LibreNMS test devices
| |||||||||||||||||||||
| TlldpXdot3RemMaxFrameSizeTable | 1.0.8802.1.1.2.1.5.4623.1.3.4 | NA | |||||||||||||||||||
table · not-accessible · current This table contains one row per port of maximum frame size information (as a part of the LLDP 802.3 organizational extension) of the remote system. | |||||||||||||||||||||
| RlldpXdot3RemMaxFrameSizeEntry | 1.0.8802.1.1.2.1.5.4623.1.3.4.1 | NA | |||||||||||||||||||
row · not-accessible · current Maximum Frame Size information about a particular port component. | |||||||||||||||||||||
| ClldpXdot3RemMaxFrameSize | 1.0.8802.1.1.2.1.5.4623.1.3.4.1.1 | Integer32 (0..65535) | RO | 9216 | |||||||||||||||||
column · Integer32 (0..65535) · read-only · current An integer value indicating the maximum supported frame size in octets on the port component associated with the remote system. Example values from LibreNMS test devices
| |||||||||||||||||||||
| NlldpXdot3Conformance | 1.0.8802.1.1.2.1.5.4623.2 | ||||||||||||||||||||
| NlldpXdot3Compliances | 1.0.8802.1.1.2.1.5.4623.2.1 | ||||||||||||||||||||
| MlldpXdot3Compliance | 1.0.8802.1.1.2.1.5.4623.2.1.1 | ||||||||||||||||||||
compliance · current The compliance statement for SNMP entities which implement the LLDP 802.3 organizational extension MIB. | |||||||||||||||||||||
| NlldpXdot3Groups | 1.0.8802.1.1.2.1.5.4623.2.2 | ||||||||||||||||||||
| GlldpXdot3ConfigGroup | 1.0.8802.1.1.2.1.5.4623.2.2.1 | ||||||||||||||||||||
group · current The collection of objects which are used to configure the LLDP 802.3 organizational extension implementation behavior. This group is mandatory for agents which implement the LLDP 802.3 organizational extension. | |||||||||||||||||||||
| GlldpXdot3LocSysGroup | 1.0.8802.1.1.2.1.5.4623.2.2.2 | ||||||||||||||||||||
group · current The collection of objects which are used to represent LLDP 802.3 organizational extension Local Device Information. This group is mandatory for agents which implement the LLDP 802.3 organizational extension in the TX mode.
| |||||||||||||||||||||
| GlldpXdot3RemSysGroup | 1.0.8802.1.1.2.1.5.4623.2.2.3 | ||||||||||||||||||||
group · current The collection of objects which are used to represent LLDP 802.3 organizational extension Local Device Information. This group is mandatory for agents which implement the LLDP 802.3 organizational extension in the RX mode.
| |||||||||||||||||||||
Textual conventions
LldpLinkAggStatusMapBitsaggCapable(0)aggEnabled(1)This TC describes the link aggregation status. The bit 'aggCapable(0)' indicates the link is capable of being aggregated. The bit 'aggEnabled(1)' indicates the link is currently in aggregation.
LldpPowerPortClassINTEGERpClassPD(2)pClassPSE(1)This TC describes the Power over Ethernet (PoE) port class.